| Age | Commit message (Collapse) | Author |
|---|
|
Hook up the generic vDSO implementation to the aarch64 vDSO data page.
The _vdso_rng_data required data is placed within the _vdso_data vvar
page, by using a offset larger than the vdso_data.
The vDSO function requires a ChaCha20 implementation that does not write
to the stack, and that can do an entire ChaCha20 permutation. The one
provided uses NEON on the permute operation, with a fallback to the
syscall for chips that do not support AdvSIMD.
This also passes the vdso_test_chacha test along with
vdso_test_getrandom. The vdso_test_getrandom bench-single result on
Neoverse-N1 shows:
vdso: 25000000 times in 0.783884250 seconds
libc: 25000000 times in 8.780275399 seconds
syscall: 25000000 times in 8.786581518 seconds
A small fixup to arch/arm64/include/asm/mman.h was required to avoid
pulling kernel code into the vDSO, similar to what's already done in
arch/arm64/include/asm/rwonce.h.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Currently alternative_has_cap_unlikely() can be used in VDSO code, but
alternative_has_cap_likely() cannot as it references alt_cb_patch_nops,
which is not available when linking the VDSO. This is unfortunate as it
would be useful to have alternative_has_cap_likely() available in VDSO
code.
The use of alt_cb_patch_nops was added in commit:
d926079f17bf8aa4 ("arm64: alternatives: add shared NOP callback")
... as removing duplicate NOPs within the kernel Image saved areasonable
amount of space.
Given the VDSO code will have nowhere near as many alternative branches
as the main kernel image, this isn't much of a concern, and a few extra
nops isn't a massive problem.
Change alternative_has_cap_likely() to only use alt_cb_patch_nops for
the main kernel image, and allow duplicate NOPs in VDSO code.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
The chacha vDSO selftest doesn't check the way the counter is handled by
__arch_chacha20_blocks_nostack(). It indirectly checks that the counter
is writen on exit and read back on new entry, but it doesn't check that
the format is correct. When implementing this function on powerpc, I
missed a case where the counter was writen and read in wrong byte order.
Also, the counter uses two words, but the tests with a zero counter and
uses a small amount of blocks, so at the end the upper part of the
counter is always 0, so it is not checked.
Add a verification of counter's content in addition to the verification
of the output.
Also add two tests where the counter crosses the u32 upper limit. The
first test verifies that the function properly writes back the upper
word, the second test verifies that the function properly reads back the
upper word.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Without -O2, the generated code for testing chacha function is awful.
GCC even implements rol32() as a function of 20 instructions instead of
just using the rotlwi instruction.
~# time ./vdso_test_chacha
TAP version 13
1..1
ok 1 chacha: PASS
real 0m 37.16s
user 0m 36.89s
sys 0m 0.26s
Several other selftests directory add -O2, and the kernel is also
always built with optimisation active. Do the same for vDSO selftests.
With this patch the time is reduced by approximately 15%.
~# time ./vdso_test_chacha
TAP version 13
1..1
ok 1 chacha: PASS
real 0m 32.09s
user 0m 31.86s
sys 0m 0.22s
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Hook up the generic vDSO implementation to the LoongArch vDSO data page
by providing the required __arch_chacha20_blocks_nostack,
__arch_get_k_vdso_rng_data, and getrandom_syscall implementations. Also
wire up the selftests.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Acked-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Without a prototype, we'll have to add a prototype for each architecture
implementing vDSO getrandom. As most architectures will likely have the
vDSO getrandom implemented in a near future, and we'd like to keep the
declarations compatible everywhere (to ease the libc implementor work),
we should really just have one copy of the prototype.
This also is what's already done inside of include/vdso/gettime.h for
those vDSO functions, so this continues that convention.
Suggested-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Acked-by: Huacai Chen <chenhuacai@kernel.org>
[Jason: rewrite docbook comment for prototype.]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Unlike the check for the standalone x86 test, the check for building the
vDSO getrandom and chacaha tests looks at the architecture for the host
rather than the architecture for the target when deciding if they should
be built. Since the chacha test includes some assembler code this means
that cross building with x86 as either the target or host is broken.
There's also some additional complications, where ARCH can legitimately
be either x86_64 or x86, but the source code we need to compile lives in
a directory path containing arch/x86. The standard SRCARCH variable
handles that. And actually, all these variables and proper substitutions
are already described in tools/scripts/Makefile.arch, so just include
that to handle it.
Similarly, ARCH=x86 can actually describe ARCH=x86_64,
just with CONFIG_64BIT, so we can't rely on ARCH for selecting
non-32-bit tests. For that, check against $(ARCH)$(CONFIG_X86_32). This
won't help for people manually running this inside the vDSO selftest
directory (which isn't really supported anyway and has problems on
various archs), but it should work for builds of the kselftests, where
the CONFIG_* variables are defined. On x86_64 machines,
$(ARCH)$(CONFIG_X86_32) will evaluate to x86. On arm64 machines, it will
evaluate to arm64. On 32-bit x86 machines, it will evaluate to x86y,
which won't match the filter list.
Reported-by: Mark Brown <broonie@kernel.org>
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Depending on the architecture, building a 32-bit vDSO on a 64-bit kernel
is problematic when some system headers are included.
Minimise the amount of headers by moving needed items, such as
__{get,put}_unaligned_t, into dedicated common headers and in general
use more specific headers, similar to what was done in commit
8165b57bca21 ("linux/const.h: Extract common header for vDSO") and
commit 8c59ab839f52 ("lib/vdso: Enable common headers").
On some architectures this results in missing PAGE_SIZE, as was
described by commit 8b3843ae3634 ("vdso/datapage: Quick fix - use
asm/page-def.h for ARM64"), so define this if necessary, in the same way
as done prior by commit cffaefd15a8f ("vdso: Use CONFIG_PAGE_SHIFT in
vdso/datapage.h").
Removing linux/time64.h leads to missing 'struct timespec64' in
x86's asm/pvclock.h. Add a forward declaration of that struct in
that file.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
With the current implementation, __cvdso_getrandom_data() calls
memset() on certain architectures, which is unexpected in the VDSO.
Rather than providing a memset(), simply rewrite opaque data
initialization to avoid memset().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Same as for the gettimeofday CVDSO implementation, add c-getrandom-y to
ease the inclusion of lib/vdso/getrandom.c in architectures' VDSO
builds.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
_vdso_data is specific to x86 and __arch_get_k_vdso_data() is provided
so that all architectures can provide the requested pointer.
Do the same with _vdso_rng_data, provide __arch_get_k_vdso_rng_data()
and don't use x86 _vdso_rng_data directly.
Until now vdso/vsyscall.h was only included by time/vsyscall.c but now
it will also be included in char/random.c, leading to a duplicate
declaration of _vdso_data and _vdso_rng_data.
To fix this issue, move the declaration in a C file. vma.c looks like
the most appropriate candidate. We don't need to replace the definitions
in vsyscall.h by declarations as declarations are already in asm/vvar.h.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Performing SMP atomic operations on u64 fails on powerpc32:
CC drivers/char/random.o
In file included from <command-line>:
drivers/char/random.c: In function 'crng_reseed':
././include/linux/compiler_types.h:510:45: error: call to '__compiletime_assert_391' declared with attribute error: Need native word sized stores/loads for atomicity.
510 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
././include/linux/compiler_types.h:491:25: note: in definition of macro '__compiletime_assert'
491 | prefix ## suffix(); \
| ^~~~~~
././include/linux/compiler_types.h:510:9: note: in expansion of macro '_compiletime_assert'
510 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^~~~~~~~~~~~~~~~~~~
././include/linux/compiler_types.h:513:9: note: in expansion of macro 'compiletime_assert'
513 | compiletime_assert(__native_word(t), \
| ^~~~~~~~~~~~~~~~~~
./arch/powerpc/include/asm/barrier.h:74:9: note: in expansion of macro 'compiletime_assert_atomic_type'
74 | compiletime_assert_atomic_type(*p); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/asm-generic/barrier.h:172:55: note: in expansion of macro '__smp_store_release'
172 | #define smp_store_release(p, v) do { kcsan_release(); __smp_store_release(p, v); } while (0)
| ^~~~~~~~~~~~~~~~~~~
drivers/char/random.c:286:9: note: in expansion of macro 'smp_store_release'
286 | smp_store_release(&__arch_get_k_vdso_rng_data()->generation, next_gen + 1);
| ^~~~~~~~~~~~~~~~~
The kernel-side generation counter in the random driver is handled as an
unsigned long, not as a u64, in base_crng and struct crng.
But on the vDSO side, it needs to be an u64, not just an unsigned long,
in order to support a 32-bit vDSO atop a 64-bit kernel.
On kernel side, however, it is an unsigned long, hence a 32-bit value on
32-bit architectures, so just cast it to unsigned long for the
smp_store_release(). A side effect is that on big endian architectures
the store will be performed in the upper 32 bits. It is not an issue on
its own because the vDSO site doesn't mind the value, as it only checks
differences. Just make sure that the vDSO side checks the full 64 bits.
For that, the local current_generation has to be u64 as well.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Linking to libsodium makes building this test annoying in cross
compilation environments and is just way too much. Since this is just a
basic correctness test, simply open code a simple, unoptimized, dumb
chacha, rather than linking to libsodium.
This also fixes a correctness issue on big endian systems. The kernel's
random.c doesn't bother doing a le32_to_cpu operation on the random
bytes that are passed as the key, and consequently neither does
vgetrandom-chacha.S. However, libsodium's chacha _does_ do this, since
it takes the key as an array of bytes. This meant that the test was
broken on big endian systems, which this commit rectifies.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Having the prototype for __arch_chacha20_blocks_nostack in
arch/x86/include/asm/vdso/getrandom.h meant that the prototype and large
doc comment were cloned by every architecture, which has been causing
unnecessary churn. Instead move it into include/vdso/getrandom.h, where
it can be shared by all archs implementing it.
As a side bonus, this then lets us use that prototype in the
vdso_test_chacha self test, to ensure that it matches the source, and
indeed doing so turned up some inconsistencies, which are rectified
here.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
After verifying that vDSO getrandom does work, which ensures that the
RNG is initialized, test to see if it also works inside of a time
namespace. This is important to test, because the vvar pages get
swizzled around there. If the arch code isn't careful, the RNG will
appear uninitialized inside of a time namespace.
Because broken code makes the RNG appear uninitialized, test that
everything works by issuing a call to vgetrandom from a fork in a time
namespace, and use ptrace to ensure that the actual syscall getrandom
doesn't get called. If it doesn't get called, then the test succeeds.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
for-6.12/block
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.12
- A syntax cleanup (Shen)
- Fix a Kconfig linking error (Arnd)
- New queue-depth quirk (Keith)"
* tag 'nvme-6.12-2024-09-13' of git://git.infradead.org/nvme:
nvme-pci: qdepth 1 quirk
nvme-tcp: fix link failure for TCP auth
nvme: Convert comma to semicolon
|
|
Another device has been reported to be unreliable if we have more than
one outstanding command. In this new case, data corruption may occur.
Since we have two devices now needing this quirky behavior, make a
generic quirk flag.
The same Apple quirk is clearly not "temporary", so update the comment
while moving it.
Link: https://lore.kernel.org/linux-nvme/191d810a4e3.fcc6066c765804.973611676137075390@collabora.com/
Reported-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Christoph Hellwig hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
devm_hwmon_device_unregister() has no in-tree user, and its implementation
is wrong since it does not pass the to-be-removed hardware monitoring
device as parameter. I do not envision a valid use for it; drivers needing
it should not have called devm_hwmon_device_register_with_info() in the
first place. Remove it.
Reported-by: Matthew Sanders <m@ttsande.rs>
Closes: https://lore.kernel.org/linux-hwmon/488b3bdf870ea76c4b943dbe5fd15ac8113019dc.camel@kernel.org/
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Refactor Soundwire machine driver code by using common SoundWire
endpoint parsing helper functions.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240913090631.1834543-6-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move SoundWire endpoint parsing helper functions to common place holder.
These functions will be used by other platform machine driver code.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240913090631.1834543-5-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move Soundwire endpoint and dai link structures from Intel generic machine
driver code to common place holder(soc_sdw_utils.h). These structures will
be used in other platform SoundWire machine driver code.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240913090631.1834543-4-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rename SoundWire parsing helper functions with 'asoc_sdw' tag
to make it generic.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240913090631.1834543-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rename SoundWire endpoint and dai link structures with asoc tag to make it
generic.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240913090631.1834543-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the new cmpxchg_emu_u8() to emulate one-byte cmpxchg() on xtensa.
[ paulmck: Apply kernel test robot feedback. ]
[ paulmck: Drop two-byte support per Arnd Bergmann feedback. ]
[ Apply Geert Uytterhoeven feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Yujie Liu <yujie.liu@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
|
|
Use the new cmpxchg_emu_u8() to emulate one-byte cmpxchg() on sh.
[ paulmck: Drop two-byte support per Arnd Bergmann feedback. ]
[ paulmck: Apply feedback from Naresh Kamboju. ]
[ Apply Geert Uytterhoeven feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: <linux-sh@vger.kernel.org>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
Use the new cmpxchg_emu_u8() to emulate one-byte cmpxchg() on arc.
[ paulmck: Drop two-byte support per Arnd Bergmann feedback. ]
[ paulmck: Apply feedback from Naresh Kamboju. ]
[ paulmck: Apply kernel test robot feedback. ]
[ paulmck: Apply feedback from Vineet Gupta. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: <linux-snps-arc@lists.infradead.org>
Acked-by: Vineet Gupta <vgupta@kernel.org>
|
|
Avoid removing these controls, as doing so can cause issues if the stream
is initiated from another control. Ensure these controls remain intact when
the stream is started or finished. Instead of removing them, return an
-EBUSY error code to indicate that the controller is busy, especially when
the audio filter and the SINC filter are in use.
[andrei.simion@microchip.com: Reword the commit title and the commit
message. Replace spinlock and busy variable with atomic_t busy_stream.]
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://patch.msgid.link/20240913120621.79088-1-andrei.simion@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some comments here are referring to a non-existent
regulator_ops::get_voltage_vsel() where ::get_voltage_sel() is meant,
and similar for ::set_voltage_vsel() / ::set_voltage_sel().
Update the comments.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20240913-regulator-typos-v1-1-92781c93f638@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use irq_get_trigger_type() to replace irq_get_irq_data() and then
irqd_get_trigger_type(), if the irq data is NULL it will return 0.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240913013503.3754712-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In case vmmc or vqmmc regulator is not available yet, use dev_err_probe
in order to set a deferred probe reason. This is a helpful hint in
/sys/kernel/debug/devices_deferred
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20240911090910.3060749-1-alexander.stein@ew.tq-group.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Commit 9094e53ff5c86ebe ("pmdomain: core: Use dev_name() instead of
kobject_get_path() in debugfs") severely shortened the names of devices
in a PM Domain. Now the most common format[1] consists of a 32-bit
unit-address (8 characters), followed by a dot and a node name (20
characters for "air-pollution-sensor" and "interrupt-controller", which
are the longest generic node names documented in the Devicetree
Specification), for a typical maximum of 29 characters.
This offers a good opportunity to reduce the table width of the debug
summary:
- Reduce the device name field width from 50 to 30 characters, which
matches the PM Domain name width,
- Reduce the large inter-column space between the "performance" and
"managed by" columns.
Visual impact:
- The "performance" column now starts at a position that is a
multiple of 16, just like the "status" and "children" columns,
- All of the "/device", "runtime status", and "managed by" columns are
now indented 4 characters more than the columns right above them,
- Everything fits in (one less than) 80 characters again ;-)
[1] Note that some device names (e.g. TI AM335x interconnect target
modules) do not follow this convention, and may be much longer, but
these didn't fit in the old 50-character column width either.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/f8e1821364b6d5d11350447c128f6d2b470f33fe.1725459707.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Move mode_status_str() below perf_status_str(), to make declaration
order match calling order of the various *_status_str() helpers.
While at it, add a blank line for consistency among the three helpers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/18ed6fb2bb92860f3af1bc7e5e4a01e9dacf2126.1725459707.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The "performance" column contains variable-width values. Hence when
their printed values contain more than one digit, all values in
successive columns become misaligned.
Fix this by formatting it as a fixed-width field. Adjust successive
spaces and field widths to retain the exiting layout.
Fixes: 0155aaf95a2a ("PM: domains: Add the domain HW-managed mode to the summary")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/e004f9d2a75e9a49c269507bb8a4514001751e85.1725459707.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The inter-column space in the debug summary is two spaces. However, in
one case, the extra space is handled implicitly in a field width
specifier. Make inter-column space explicit to ease future maintenance.
Fixes: 45fbc464b047 ("PM: domains: Add "performance" column to debug summary")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ae61eb363621b981edde878e1e74d701702a579f.1725459707.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The size of the mux stride was off by one, which could result in
invalid pin configuration on the device side or invalid state
readings on the software side.
While on it also update the code and:
- Increase the mux stride size to 16
- Align the virtual muxed regmap range to 16
- Start the regmap window at the selector
- Mark reserved registers as not-readable
Fixes: 8670de9fae49 ("pinctrl: cy8c95x0: Use regmap ranges")
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reported-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/20240902072859.583490-1-patrick.rudolph@9elements.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into fixes
intel-pinctrl for v6.11-1
This includes a new ACPI ID that is added to the Intel Meteor Lake
driver to support recent Intel Arrow Lake hardware.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The RK3576 SoC needs to ungate the power domains before their status can
be modified.
The values have been taken from the rockchip downstream driver.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://lore.kernel.org/r/20240829202732.75961-3-detlev.casanova@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Some rockchip SoC need to ungate power domains before their power status
can be changed.
Each power domain has a gate mask that is set to 1 to ungate it when
manipulating power status, then set back to 0 to gate it again.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://lore.kernel.org/r/20240829202732.75961-2-detlev.casanova@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
into next
|
|
Drop OF node reference immediately after using it in
syscon_node_to_regmap(), which is both simpler and typical/expected
code pattern.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240825183116.102953-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Using dev_err_cast_probe() to simplify the code.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20240828121230.3696315-1-lihongbo22@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This variable is only used within the probe() function, so let's remove
it from the context and define it locally within the same function.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20240825143428.556439-3-dario.binacchi@amarulasolutions.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The removed code was added to handle the case where the power domain is
already on during the driver's probing. In this use case, the "is_off"
parameter is passed as false to pm_genpd_init() to inform it not to call
the power_on() callback, as it's unnecessary to perform the hardware
power-on procedure since the power domain is already on. Therefore, with
the call to clk_bulk_prepare_enable() by probe(), the system is in the
same operational state as when "is_off" is passed as true after the
power_on() callback execution:
probe() -> is_off == true -> clk_bulk_prepare_enable() called by power_on()
probe() -> is_off == false -> clk_bulk_prepare_enable() called by probe()
Reaching the same logical and operational state, it follows that upon
driver removal, there is no need to perform different actions depending
on the power domain's on/off state during probing.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20240825143428.556439-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This way, the code becomes more compact, and dev_err_probe() is used in
every error path of the probe() function.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240825143428.556439-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Adds support for GB2Pro Arc variant (NP950XEE) based on successful
test and information provided by Github user drewdrew0 [1].
[1]: https://github.com/thesofproject/linux/issues/4055#issuecomment-2346890020
Signed-off-by: Joshua Grisham <josh@joshuagrisham.com>
Link: https://patch.msgid.link/20240913080055.10807-1-josh@joshuagrisham.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Return EINVAL if the snprintf check fails when constructing the
algorithm names.
Fixes: 8c20982caca4 ("crypto: n2 - Silence gcc format-truncation false positive warnings")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202409090726.TP0WfY7p-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Instead of directly casting and returning (void *) pointer, use ERR_CAST
to explicitly return an error-valued pointer. This makes the error handling
more explicit and improves code clarity.
Signed-off-by: Chen Yufan <chenyufan@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When entering the "len & sizeof(u32)" branch, len must be less than 8.
So after one operation, len must be less than 4.
At this time, "len -= sizeof(u32)" is not necessary for 64-bit CPUs.
After that, replace `while' loops with equivalent `for' to make the
code structure a little bit better by the way.
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/all/alpine.DEB.2.21.2406281713040.43454@angie.orcam.me.uk/
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/all/ZtqZpzMH_qMQqzyc@gondor.apana.org.au/
Signed-off-by: Guan Wentao <guanwentao@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The qcom-rng driver supports both ACPI and device tree based systems.
Let's rename all instances of *of_data to *match_data so that it's
not implied that this driver only supports device tree-based systems.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The qcom-rng driver supports both ACPI and device tree-based systems.
ACPI support was broken when the hw_random interface support was added.
Let's go ahead and fix this by adding the appropriate driver data to the
ACPI match table, and change the of_device_get_match_data() call to
device_get_match_data() so that it will also work on ACPI-based systems.
This fix was boot tested on a Qualcomm Amberwing server (ACPI based) and
on a Qualcomm SA8775p Automotive Development Board (DT based). I also
verified that qcom-rng shows up in /proc/crypto on both systems.
Fixes: f29cd5bb64c2 ("crypto: qcom-rng - Add hw_random interface support")
Reported-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Closes: https://lore.kernel.org/linux-arm-msm/20240828184019.GA21181@eaf/
Cc: stable@vger.kernel.org
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
