summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-03-10ASoC: codecs: wcd934x: add a sanity check in set channel mapSrinivas Kandagatla
set channel map can be passed with a channel maps, however if the number of channels that are passed are more than the actual supported channels then we would be accessing array out of bounds. So add a sanity check to validate these numbers! Fixes: a61f3b4f476e ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec") Reported-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210309142129.14182-4-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: qcom: sdm845: Fix array out of range on rx slim channelsSrinivas Kandagatla
WCD934x has only 13 RX SLIM ports however we are setting it as 16 in set_channel_map, this will lead to array out of bounds error! Orignally caught by enabling USBAN array out of bounds check: Fixes: 5caf64c633a3 ("ASoC: qcom: sdm845: add support to DB845c and Lenovo Yoga") Reported-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210309142129.14182-3-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: qcom: sdm845: Fix array out of bounds accessSrinivas Kandagatla
Static analysis Coverity had detected a potential array out-of-bounds write issue due to the fact that MAX AFE port Id was set to 16 instead of using AFE_PORT_MAX macro. Fix this by properly using AFE_PORT_MAX macro. Fixes: 1b93a8843147 ("ASoC: qcom: sdm845: handle soundwire stream") Reported-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210309142129.14182-2-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10Merge series "Report jack and button detection + Capture Support" from Lucas ↵Mark Brown
Tanure <tanureal@opensource.cirrus.com>: Hi All, Here is a patch series for reporting to user space jack and button events and add the support for Capture. With some cleanups and fixes along the way. Regards, Lucas Tanure Lucas Tanure (12): ASoC: cs42l42: Fix Bitclock polarity inversion ASoC: cs42l42: Fix channel width support ASoC: cs42l42: Fix mixer volume control ASoC: cs42l42: Don't enable/disable regulator at Bias Level ASoC: cs42l42: Always wait at least 3ms after reset ASoC: cs42l42: Remove power if the driver is being removed ASoC: cs42l42: Disable regulators if probe fails ASoC: cs42l42: Provide finer control on playback path ASoC: cs42l42: Set clock source for both ways of stream ASoC: cs42l42: Add Capture Support ASoC: cs42l42: Report jack and button detection ASoC: cs42l42: Use bclk from hw_params if set_sysclk was not called Richard Fitzgerald (3): ASoC: cs42l42: Wait at least 150us after writing SCLK_PRESENT ASoC: cs42l42: Only start PLL if it is needed ASoC: cs42l42: Wait for PLL to lock before switching to it sound/soc/codecs/cs42l42.c | 437 +++++++++++++++++++++---------------- sound/soc/codecs/cs42l42.h | 41 +++- 2 files changed, 282 insertions(+), 196 deletions(-) -- 2.30.1
2021-03-10ASoC: remove remnants of sirf prima/atlas audio codecPeter Robinson
In 61fbeb5 the sirf prima/atlas drivers were removed. This cleans up a stray header and some Kconfig entries for the codec that were missed in the process. Fixes: 61fbeb5dcb3d (ASoC: remove sirf prima/atlas drivers) Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mark Brown <broonie@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210307162338.1160604-1-pbrobinson@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: codecs: lpass-wsa-macro: fix RX MIX input controlsJonathan Marek
Attempting to use the RX MIX path at 48kHz plays at 96kHz, because these controls are incorrectly toggling the first bit of the register, which is part of the FS_RATE field. Fix the problem by using the same method used by the "WSA RX_MIX EC0_MUX" control, which is to use SND_SOC_NOPM as the register and use an enum in the shift field instead. Fixes: 2c4066e5d428 ("ASoC: codecs: lpass-wsa-macro: add dapm widgets and route") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210305005049.24726-1-jonathan@marek.ca Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: codecs: lpass-va-macro: mute/unmute all active decimatorsJonathan Marek
An interface can have multiple decimators enabled, so loop over all active decimators. Otherwise only one channel will be unmuted, and other channels will be zero. This fixes recording from dual DMIC as a single two channel stream. Also remove the now unused "active_decimator" field. Fixes: 908e6b1df26e ("ASoC: codecs: lpass-va-macro: Add support to VA Macro") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210304215646.17956-1-jonathan@marek.ca Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: cs42l42: Always wait at least 3ms after resetLucas Tanure
This delay is part of the power-up sequence defined in the datasheet. A runtime_resume is a power-up so must also include the delay. Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210305173442.195740-6-tanureal@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: cs42l42: Don't enable/disable regulator at Bias LevelLucas Tanure
dev_pm_ops already enable/disable the codec if not in use Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210305173442.195740-5-tanureal@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: cs42l42: Fix mixer volume controlLucas Tanure
The minimum value is 0x3f (-63dB), which also is mute Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210305173442.195740-4-tanureal@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: cs42l42: Fix channel width supportLucas Tanure
Remove the hard coded 32 bits width and replace with the correct width calculated by params_width. Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210305173442.195740-3-tanureal@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: cs42l42: Fix Bitclock polarity inversionLucas Tanure
The driver was setting bit clock polarity opposite to intended polarity. Also simplify the code by grouping ADC and DAC clock configurations into a single field. Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210305173442.195740-2-tanureal@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: soc-core: Prevent warning if no DMI table is presentJon Hunter
Many systems do not use ACPI and hence do not provide a DMI table. On non-ACPI systems a warning, such as the following, is printed on boot. WARNING KERN tegra-audio-graph-card sound: ASoC: no DMI vendor name! The variable 'dmi_available' is not exported and so currently cannot be used by kernel modules without adding an accessor. However, it is possible to use the function is_acpi_device_node() to determine if the sound card is an ACPI device and hence indicate if we expect a DMI table to be present. Therefore, call is_acpi_device_node() to see if we are using ACPI and only parse the DMI table if we are booting with ACPI. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20210303115526.419458-1-jonathanh@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: SOF: Intel: unregister DMIC device on probe errorPierre-Louis Bossart
We only unregister the platform device during the .remove operation, but if the probe fails we will never reach this sequence. Suggested-by: Bard Liao <yung-chuan.liao@linux.intel.com> Fixes: dd96daca6c83e ("ASoC: SOF: Intel: Add APL/CNL HW DSP support") Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20210302003410.1178535-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10Merge series "AsoC: rt5640/rt5651: Volume control fixes" from Hans de Goede ↵Mark Brown
<hdegoede@redhat.com>: Hi All, Here is a series of rt5640/rt5651 volume-control fixes which I wrote while working on a bytcr-rt5640 UCM profile patch-series adding hardware-volume control to devices using this UCM profile. The UCM series will also work on older kernels, but it works best on kernels with this series applied, giving e.g. finer grained volume control and support for hardware muting the outputs. Regards, Hans Hans de Goede (5): ASoC: rt5640: Fix dac- and adc- vol-tlv values being off by a factor of 10 ASoC: rt5651: Fix dac- and adc- vol-tlv values being off by a factor of 10 ASoC: rt5640: Add emulated 'DAC1 Playback Switch' control ASoC: rt5640: Rename 'Mono DAC Playback Volume' to 'DAC2 Playback Volume' ASoC: Intel: bytcr_rt5640: Add used AIF to the components string sound/soc/codecs/rt5640.c | 106 +++++++++++++++++++++++--- sound/soc/codecs/rt5640.h | 4 + sound/soc/codecs/rt5651.c | 4 +- sound/soc/intel/boards/bytcr_rt5640.c | 11 ++- 4 files changed, 111 insertions(+), 14 deletions(-) -- 2.30.1
2021-03-10ASoC: es8316: Simplify adc_pga_gain_tlv tableHans de Goede
Most steps in this table are steps of 3dB (300 centi-dB), so we can simplify the table. This not only reduces the amount of space it takes inside the kernel, this also makes alsa-lib's mixer code actually accept the table, where as before this change alsa-lib saw the "ADC PGA Gain" control as a control without a dB scale. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210228160441.241110-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: sgtl5000: set DAP_AVC_CTRL register to correct default value on probeBenjamin Rood
According to the SGTL5000 datasheet [1], the DAP_AVC_CTRL register has the following bit field definitions: | BITS | FIELD | RW | RESET | DEFINITION | | 15 | RSVD | RO | 0x0 | Reserved | | 14 | RSVD | RW | 0x1 | Reserved | | 13:12 | MAX_GAIN | RW | 0x1 | Max Gain of AVC in expander mode | | 11:10 | RSVD | RO | 0x0 | Reserved | | 9:8 | LBI_RESP | RW | 0x1 | Integrator Response | | 7:6 | RSVD | RO | 0x0 | Reserved | | 5 | HARD_LMT_EN | RW | 0x0 | Enable hard limiter mode | | 4:1 | RSVD | RO | 0x0 | Reserved | | 0 | EN | RW | 0x0 | Enable/Disable AVC | The original default value written to the DAP_AVC_CTRL register during sgtl5000_i2c_probe() was 0x0510. This would incorrectly write values to bits 4 and 10, which are defined as RESERVED. It would also not set bits 12 and 14 to their correct RESET values of 0x1, and instead set them to 0x0. While the DAP_AVC module is effectively disabled because the EN bit is 0, this default value is still writing invalid values to registers that are marked as read-only and RESERVED as well as not setting bits 12 and 14 to their correct default values as defined by the datasheet. The correct value that should be written to the DAP_AVC_CTRL register is 0x5100, which configures the register bits to the default values defined by the datasheet, and prevents any writes to bits defined as 'read-only'. Generally speaking, it is best practice to NOT attempt to write values to registers/bits defined as RESERVED, as it generally produces unwanted/undefined behavior, or errors. Also, all credit for this patch should go to my colleague Dan MacDonald <dmacdonald@curbellmedical.com> for finding this error in the first place. [1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf Signed-off-by: Benjamin Rood <benjaminjrood@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20210219183308.GA2117@ubuntu-dev Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: rt5651: Fix dac- and adc- vol-tlv values being off by a factor of 10Hans de Goede
The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB, not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace apps which translate the dB scale to a linear scale. With the logarithmic dB scale being of by a factor of 10 we loose all precision in the lower area of the range when apps translate things to a linear scale. E.g. the 0 dB default, which corresponds with a value of 47 of the 0 - 127 range for the control, would be shown as 0/100 in alsa-mixer. Since the centi-dB values used in the TLV struct cannot represent the 0.375 dB step size used by these controls, change the TLV definition for them to specify a min and max value instead of min + stepsize. Note this mirrors commit 3f31f7d9b540 ("ASoC: rt5670: Fix dac- and adc- vol-tlv values being off by a factor of 10") which made the exact same change to the rt5670 codec driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210226143817.84287-3-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: rt5640: Fix dac- and adc- vol-tlv values being off by a factor of 10Hans de Goede
The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB, not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace apps which translate the dB scale to a linear scale. With the logarithmic dB scale being of by a factor of 10 we loose all precision in the lower area of the range when apps translate things to a linear scale. E.g. the 0 dB default, which corresponds with a value of 47 of the 0 - 127 range for the control, would be shown as 0/100 in alsa-mixer. Since the centi-dB values used in the TLV struct cannot represent the 0.375 dB step size used by these controls, change the TLV definition for them to specify a min and max value instead of min + stepsize. Note this mirrors commit 3f31f7d9b540 ("ASoC: rt5670: Fix dac- and adc- vol-tlv values being off by a factor of 10") which made the exact same change to the rt5670 codec driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210226143817.84287-2-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: Intel: bytcr_rt5640: Fix HP Pavilion x2 10-p0XX OVCD current thresholdHans de Goede
When I added the quirk for the "HP Pavilion x2 10-p0XX" I copied the byt_rt5640_quirk_table[] entry for the HP Pavilion x2 10-k0XX / 10-n0XX models since these use almost the same settings. While doing this I accidentally also copied and kept the non-standard OVCD_TH_1500UA setting used on those models. This too low threshold is causing headsets to often be seen as headphones (without a headset-mic) and when correctly identified it is causing ghost play/pause button-presses to get detected. Correct the HP Pavilion x2 10-p0XX quirk to use the default OVCD_TH_2000UA setting, fixing these problems. Fixes: fbdae7d6d04d ("ASoC: Intel: bytcr_rt5640: Fix HP Pavilion x2 Detachable quirks") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210224105052.42116-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10Merge series "ASoC: rt5670: Various kcontrol fixes" from Hans de Goede ↵Mark Brown
<hdegoede@redhat.com>: Hi All, While working on adding hardware-volume control support to the UCM profile for the rt5672 and on adding LED trigger support to the rt5670 codec driver. I hit / noticed a couple of issues this series fixes these issues. Regards, Hans Hans de Goede (4): ASoC: rt5670: Remove 'OUT Channel Switch' control ASoC: rt5670: Remove 'HP Playback Switch' control ASoC: rt5670: Remove ADC vol-ctrl mute bits poking from Sto1 ADC mixer settings ASoC: rt5670: Add emulated 'DAC1 Playback Switch' control sound/soc/codecs/rt5670.c | 110 +++++++++++++++++++++++++++++++++----- sound/soc/codecs/rt5670.h | 9 ++-- 2 files changed, 101 insertions(+), 18 deletions(-) -- 2.30.1
2021-03-10ASoC: ak5558: Add MODULE_DEVICE_TABLEShengjiu Wang
Add missed MODULE_DEVICE_TABLE for the driver can be loaded automatically at boot. Fixes: 920884777480 ("ASoC: ak5558: Add support for AK5558 ADC driver") Cc: <stable@vger.kernel.org> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1614149872-25510-2-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: ak4458: Add MODULE_DEVICE_TABLEShengjiu Wang
Add missed MODULE_DEVICE_TABLE for the driver can be loaded automatically at boot. Fixes: 08660086eff9 ("ASoC: ak4458: Add support for AK4458 DAC driver") Cc: <stable@vger.kernel.org> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1614149872-25510-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: rt5670: Add emulated 'DAC1 Playback Switch' controlHans de Goede
For reliable output-mute LED control we need a "DAC1 Playback Switch" control. The "DAC Playback volume" control is the only control in the path from the DAC1 data input to the speaker output, so the UCM profile for the speaker output will have its PlaybackMixerElem set to "DAC1". But userspace (pulseaudio) will set the "DAC1 Playback Volume" control to its softest setting (which is not fully muted) while still showing the speaker as being enabled at a low volume in the UI. If we were to set the SNDRV_CTL_ELEM_ACCESS_SPK_LED on the "DAC1 Playback Volume" control, this would mean then what pressing KEY_VOLUMEDOWN the speaker-mute LED (embedded in the volume-mute toggle key) would light while the UI is still showing the speaker as being enabled at a low volume, meaning that the UI and the LED are out of sync. Only after an _extra_ KEY_VOLUMEDOWN press would the UI show the speaker as being muted. The path from DAC1 data input to the speaker output does have a digital mixer with DAC1's data as one of its inputs direclty after the "DAC1 Playback Volume" control. This commit adds an emulated "DAC1 Playback Switch" control by: 1. Declaring the enable flag for that mixers DAC1 input as well as the "DAC1 Playback Switch" control both as SND_SOC_NOPM controls. 2. Storing the settings of both controls as driver-private data 3. Only clearing the mute flag for the DAC1 input of that mixer if the stored values indicate both controls are enabled. This is a preparation patch for adding "audio-mute" LED trigger support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210215142118.308516-5-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: rt5670: Remove ADC vol-ctrl mute bits poking from Sto1 ADC mixer settingsHans de Goede
The SND_SOC_DAPM_MIXER declaration for "Sto1 ADC MIXL" and "Sto1 ADC MIXR" was using the mute bits from the RT5670_STO1_ADC_DIG_VOL control as mixer master mute bits. But these bits are already exposed to userspace as controls as part of the "ADC Capture Volume" / "ADC Capture Switch" control pair: SOC_DOUBLE("ADC Capture Switch", RT5670_STO1_ADC_DIG_VOL, RT5670_L_MUTE_SFT, RT5670_R_MUTE_SFT, 1, 1), SOC_DOUBLE_TLV("ADC Capture Volume", RT5670_STO1_ADC_DIG_VOL, RT5670_L_VOL_SFT, RT5670_R_VOL_SFT, 127, 0, adc_vol_tlv), Both the fact that the mute bits belong to the same reg as the vol-ctrl and the "Digital Mixer Path" diagram in the datasheet clearly shows that these mute bits are not part of the mixer and having 2 separate controls poking at the same bits is a bad idea. Remove the master-mute bits settings from the "Sto1 ADC MIXL" and "Sto1 ADC MIXR" DAPM widget declarations, avoiding these bits getting poked from 2 different places. This should not cause any issues for userspace. AFAICT the rt567x codecs are only used on x86/ACPI devices and the UCM profiles used there already set the "ADC Capture Switch" as needed. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210215142118.308516-4-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: rt5670: Remove 'HP Playback Switch' controlHans de Goede
The RT5670_L_MUTE_SFT and RT5670_R_MUTE_SFT bits (bits 15 and 7) of the RT5670_HP_VOL register are set / unset by the headphones deplop code run by rt5670_hp_event() on SND_SOC_DAPM_POST_PMU / SND_SOC_DAPM_PRE_PMD. So we should not also export a control to userspace which toggles these same bits. This should not cause any issues for userspace. AFAICT the rt567x codecs are only used on x86/ACPI devices and the UCM profiles used there do not use the "HP Playback Switch" control. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210215142118.308516-3-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: rt5670: Remove 'OUT Channel Switch' controlHans de Goede
The "OUT Channel Switch" control is a left over from code copied from thr rt5640 codec driver. With the rt5640 codec driver the output volume controls have 2 pairs of mute bits: bit 7, 15: Mute Control for Spk/Headphone/Line Output Port bit 6, 14: Mute Control for Spk/Headphone/Line Volume Channel Bits 7 and 15 are normal mute bits on the rt5670/5672 which are controlled by 2 dapm widgets: SND_SOC_DAPM_SWITCH("LOUT L Playback", SND_SOC_NOPM, 0, 0, &lout_l_enable_control), SND_SOC_DAPM_SWITCH("LOUT R Playback", SND_SOC_NOPM, 0, 0, &lout_r_enable_control), But on the 5670/5672 bit 6 is always reserved, where as bit 14 is "LOUT Differential Mode" on the 5670 and also reserved on the 5672. So the "OUT Channel Switch" control which is controlling bits 6+14 of the "LINE Output Control" register is bogus -> remove it. This should not cause any issues for userspace. AFAICT the rt567x codecs are only used on x86/ACPI devices and the UCM profiles used there do not use the "OUT Channel Switch" control. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210215142118.308516-2-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: fsl_ssi: Fix TDM slot setup for I2S modeAlexander Shiyan
When using the driver in I2S TDM mode, the _fsl_ssi_set_dai_fmt() function rewrites the number of slots previously set by the fsl_ssi_set_dai_tdm_slot() function to 2 by default. To fix this, let's use the saved slot count value or, if TDM is not used and the slot count is not set, proceed as before. Fixes: 4f14f5c11db1 ("ASoC: fsl_ssi: Fix number of words per frame for I2S-slave mode") Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/20210216114221.26635-1-shc_work@mail.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: codecs: lpass-rx-macro: Fix uninitialized variable ec_txColin Ian King
There is potential read of the uninitialized variable ec_tx if the call to snd_soc_component_read fails or returns an unrecognized w->name. To avoid this corner case, initialize ec_tx to -1 so that it is caught later when ec_tx is bounds checked. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 4f692926f562 ("ASoC: codecs: lpass-rx-macro: add dapm widgets and route") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210215163313.84026-1-colin.king@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: rt1015: enable BCLK detection after calibrationJack Yu
Enable BCLK detection after calibration. Signed-off-by: Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/20210222090057.29532-2-jack.yu@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: rt1015: fix i2c communication errorJack Yu
Remove 0x100 cache re-sync to solve i2c communication error. Signed-off-by: Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/20210222090057.29532-1-jack.yu@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10regulator: rt4831: Fix return value check in rt4831_regulator_probe()Wei Yongjun
In case of error, the function dev_get_regmap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 9351ab8b0cb6 ("regulator: rt4831: Adds support for Richtek RT4831 DSV regulator") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20210305034930.3236099-1-weiyongjun1@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10regulator: pca9450: Clear PRESET_EN bit to fix BUCK1/2/3 voltage settingFrieder Schrempf
The driver uses the DVS registers PCA9450_REG_BUCKxOUT_DVS0 to set the voltage for the buck regulators 1, 2 and 3. This has no effect as the PRESET_EN bit is set by default and therefore the preset values are used instead, which are set to 850 mV. To fix this we clear the PRESET_EN bit at time of initialization. Fixes: 0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver") Cc: <stable@vger.kernel.org> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Link: https://lore.kernel.org/r/20210222115229.166620-1-frieder.schrempf@kontron.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10regulator: qcom-rpmh: Use correct buck for S1C regulatorsatya priya
Use correct buck, that is, pmic5_hfsmps515 for S1C regulator of PM8350C PMIC. Signed-off-by: satya priya <skakit@codeaurora.org> Link: https://lore.kernel.org/r/1614155592-14060-7-git-send-email-skakit@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10regulator: qcom-rpmh: Correct the pmic5_hfsmps515 bucksatya priya
Correct the REGULATOR_LINEAR_RANGE and n_voltges for pmic5_hfsmps515 buck. Signed-off-by: satya priya <skakit@codeaurora.org> Link: https://lore.kernel.org/r/1614155592-14060-4-git-send-email-skakit@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10regulator: pca9450: Fix return value when failing to get sd-vsel GPIOFrieder Schrempf
This fixes the return value of pca9450_i2c_probe() to use the correct error code when getting the sd-vsel GPIO fails. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Link: https://lore.kernel.org/r/20210222150809.208942-1-frieder.schrempf@kontron.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10regulator: mt6315: Return REGULATOR_MODE_INVALID for invalid modeAxel Lin
-EINVAL is not a valid return value for .of_map_mode, return REGULATOR_MODE_INVALID instead. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210215034813.45510-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ALSA: hda/hdmi: Cancel pending works before suspendTakashi Iwai
The per_pin->work might be still floating at the suspend, and this may hit the access to the hardware at an unexpected timing. Cancel the work properly at the suspend callback for avoiding the buggy access. Note that the bug doesn't trigger easily in the recent kernels since the work is queued only when the repoll count is set, and usually it's only at the resume callback, but it's still possible to hit in theory. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1182377 Reported-and-tested-by: Abhishek Sahu <abhsahu@nvidia.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210310112809.9215-4-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-03-10ALSA: hda: Avoid spurious unsol event handling during S3/S4Takashi Iwai
When HD-audio bus receives unsolicited events during its system suspend/resume (S3 and S4) phase, the controller driver may still try to process events although the codec chips are already (or yet) powered down. This might screw up the codec communication, resulting in CORB/RIRB errors. Such events should be rather skipped, as the codec chip status such as the jack status will be fully refreshed at the system resume time. Since we're tracking the system suspend/resume state in codec power.power_state field, let's add the check in the common unsol event handler entry point to filter out such events. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1182377 Tested-by: Abhishek Sahu <abhsahu@nvidia.com> Cc: <stable@vger.kernel.org> # 183ab39eb0ea: ALSA: hda: Initialize power_state Link: https://lore.kernel.org/r/20210310112809.9215-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-03-10ALSA: hda: Flush pending unsolicited events before suspendTakashi Iwai
The HD-audio controller driver processes the unsolicited events via its work asynchronously, and this might be pending when the system goes to suspend. When a lengthy event handling like ELD byte reads is running, this might trigger unexpected accesses among suspend/resume procedure, typically seen with Nvidia driver that still requires the handling via unsolicited event verbs for ELD updates. This patch adds the flush of unsol_work to assure that pending events are processed before going into suspend. Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1182377 Reported-and-tested-by: Abhishek Sahu <abhsahu@nvidia.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210310112809.9215-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-03-10arm64: perf: Fix 64-bit event counter read truncationRob Herring
Commit 0fdf1bb75953 ("arm64: perf: Avoid PMXEV* indirection") changed armv8pmu_read_evcntr() to return a u32 instead of u64. The result is silent truncation of the event counter when using 64-bit counters. Given the offending commit appears to have passed thru several folks, it seems likely this was a bad rebase after v8.5 PMU 64-bit counters landed. Cc: Alexandru Elisei <alexandru.elisei@arm.com> Cc: Julien Thierry <julien.thierry.kdev@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: <stable@vger.kernel.org> Fixes: 0fdf1bb75953 ("arm64: perf: Avoid PMXEV* indirection") Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Link: https://lore.kernel.org/r/20210310004412.1450128-1-robh@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2021-03-10arm64/mm: Fix __enable_mmu() for new TGRAN range valuesJames Morse
As per ARM ARM DDI 0487G.a, when FEAT_LPA2 is implemented, ID_AA64MMFR0_EL1 might contain a range of values to describe supported translation granules (4K and 16K pages sizes in particular) instead of just enabled or disabled values. This changes __enable_mmu() function to handle complete acceptable range of values (depending on whether the field is signed or unsigned) now represented with ID_AA64MMFR0_TGRAN_SUPPORTED_[MIN..MAX] pair. While here, also fix similar situations in EFI stub and KVM as well. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: kvmarm@lists.cs.columbia.edu Cc: linux-efi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/1615355590-21102-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-10kselftest: arm64: Fix exit code of sve-ptraceMark Brown
We track if sve-ptrace encountered a failure in a variable but don't actually use that value when we exit the program, do so. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210309190304.39169-1-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2021-03-10arm64: mte: Map hotplugged memory as Normal TaggedCatalin Marinas
In a system supporting MTE, the linear map must allow reading/writing allocation tags by setting the memory type as Normal Tagged. Currently, this is only handled for memory present at boot. Hotplugged memory uses Normal non-Tagged memory. Introduce pgprot_mhp() for hotplugged memory and use it in add_memory_resource(). The arm64 code maps pgprot_mhp() to pgprot_tagged(). Note that ZONE_DEVICE memory should not be mapped as Tagged and therefore setting the memory type in arch_add_memory() is not feasible. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Fixes: 0178dc761368 ("arm64: mte: Use Normal Tagged attributes for the linear map") Reported-by: Patrick Daly <pdaly@codeaurora.org> Tested-by: Patrick Daly <pdaly@codeaurora.org> Link: https://lore.kernel.org/r/1614745263-27827-1-git-send-email-pdaly@codeaurora.org Cc: <stable@vger.kernel.org> # 5.10.x Cc: Will Deacon <will@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: David Hildenbrand <david@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/20210309122601.5543-1-catalin.marinas@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-10seqlock,lockdep: Fix seqcount_latch_init()Peter Zijlstra
seqcount_init() must be a macro in order to preserve the static variable that is used for the lockdep key. Don't then wrap it in an inline function, which destroys that. Luckily there aren't many users of this function, but fix it before it becomes a problem. Fixes: 80793c3471d9 ("seqlock: Introduce seqcount_latch_t") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/YEeFEbNUVkZaXDp4@hirez.programming.kicks-ass.net
2021-03-10u64_stats,lockdep: Fix u64_stats_init() vs lockdepPeter Zijlstra
Jakub reported that: static struct net_device *rtl8139_init_board(struct pci_dev *pdev) { ... u64_stats_init(&tp->rx_stats.syncp); u64_stats_init(&tp->tx_stats.syncp); ... } results in lockdep getting confused between the RX and TX stats lock. This is because u64_stats_init() is an inline calling seqcount_init(), which is a macro using a static variable to generate a lockdep class. By wrapping that in an inline, we negate the effect of the macro and fold the static key variable, hence the confusion. Fix by also making u64_stats_init() a macro for the case where it matters, leaving the other case an inline for argument validation etc. Reported-by: Jakub Kicinski <kuba@kernel.org> Debugged-by: "Ahmed S. Darwish" <a.darwish@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: "Erhard F." <erhard_f@mailbox.org> Link: https://lkml.kernel.org/r/YEXicy6+9MksdLZh@hirez.programming.kicks-ass.net
2021-03-10virt: acrn: Use EPOLLIN instead of POLLINYejune Deng
This fixes the following sparse warning: "sparse warnings: (new ones prefixed by >>)" >> drivers/virt/acrn/irqfd.c:163:13: sparse: sparse: restricted __poll_t degrades to integer Fixes: dcf9625f2adf ("virt: acrn: Use vfs_poll() instead of f_op->poll()") Reported-by: kernel test robot <lkp@intel.com> Acked-by: Shuo Liu <shuo.a.liu@intel.com> Signed-off-by: Yejune Deng <yejune.deng@gmail.com> Link: https://lore.kernel.org/r/20210310074901.7486-1-yejune.deng@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usb: dwc3: qcom: Add missing DWC3 OF node refcount decrementSerge Semin
of_get_child_by_name() increments the reference counter of the OF node it managed to find. So after the code is done using the device node, the refcount must be decremented. Add missing of_node_put() invocation then to the dwc3_qcom_of_register_core() method, since DWC3 OF node is being used only there. Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20210212205521.14280-1-Sergey.Semin@baikalelectronics.ru Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10USB: usblp: fix a hang in poll() if disconnectedPete Zaitcev
Apparently an application that opens a device and calls select() on it, will hang if the decice is disconnected. It's a little surprising that we had this bug for 15 years, but apparently nobody ever uses select() with a printer: only write() and read(), and those work fine. Well, you can also select() with a timeout. The fix is modeled after devio.c. A few other drivers check the condition first, then do not add the wait queue in case the device is disconnected. We doubt that's completely race-free. So, this patch adds the process first, then locks properly and checks for the disconnect. Reviewed-by: Zqiang <qiang.zhang@windriver.com> Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210303221053.1cf3313e@suzdal.zaitcev.lan Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10USB: gadget: udc: s3c2410_udc: fix return value check in s3c2410_udc_probe()Wei Yongjun
In case of error, the function devm_platform_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 188db4435ac6 ("usb: gadget: s3c: use platform resources") Cc: stable <stable@vger.kernel.org> Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20210305034927.3232386-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-11 18:33:16 +0000