summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-07-25tipc: fix an use-after-free issue in tipc_recvmsgXin Long
syzbot reported an use-after-free crash: BUG: KASAN: use-after-free in tipc_recvmsg+0xf77/0xf90 net/tipc/socket.c:1979 Call Trace: tipc_recvmsg+0xf77/0xf90 net/tipc/socket.c:1979 sock_recvmsg_nosec net/socket.c:943 [inline] sock_recvmsg net/socket.c:961 [inline] sock_recvmsg+0xca/0x110 net/socket.c:957 tipc_conn_rcv_from_sock+0x162/0x2f0 net/tipc/topsrv.c:398 tipc_conn_recv_work+0xeb/0x190 net/tipc/topsrv.c:421 process_one_work+0x98d/0x1630 kernel/workqueue.c:2276 worker_thread+0x658/0x11f0 kernel/workqueue.c:2422 As Hoang pointed out, it was caused by skb_cb->bytes_read still accessed after calling tsk_advance_rx_queue() to free the skb in tipc_recvmsg(). This patch is to fix it by accessing skb_cb->bytes_read earlier than calling tsk_advance_rx_queue(). Fixes: f4919ff59c28 ("tipc: keep the skb in rcv queue until the whole data is read") Reported-by: syzbot+e6741b97d5552f97c24d@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-25can: flexcan: update Kconfig to enable coldfireAngelo Dureghello
Update flexcan to support coldfire architecture. Any new platform should use OF, but coldfire architecture is actually not supporting devicetrees. Link: https://lore.kernel.org/r/20210702094841.327679-4-angelo@kernel-space.org Signed-off-by: Angelo Dureghello <angelo@kernel-space.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: flexcan: add mcf5441x supportAngelo Dureghello
Add flexcan support for NXP ColdFire mcf5441x family. This flexcan module is quite similar to imx6 flexcan module, but with some exceptions: - 3 separate interrupt sources, MB, BOFF and ERR, - implements 16 mb only, - m68k architecture is not supporting devicetrees, so a platform data check/case has been added, - ColdFire is m68k, so big-endian cpu, with a little-endian flexcan module. Link: https://lore.kernel.org/r/20210702094841.327679-5-angelo@kernel-space.org Signed-off-by: Angelo Dureghello <angelo@kernel-space.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: flexcan: add platform data headerAngelo Dureghello
Add platform data header for flexcan. Link: https://lore.kernel.org/r/20210702094841.327679-1-angelo@kernel-space.org Signed-off-by: Angelo Dureghello <angelo@kernel-space.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: etas_es58x: rewrite the message cast in es58{1,_fd}_tx_can_msg to ↵Vincent Mailhol
increase readability The es581_tx_can_msg() does below cast: | tx_can_msg = (struct es581_4_tx_can_msg *) | &es581_4_urb_cmd->bulk_tx_can_msg.tx_can_msg_buf[msg_len - 1]; The -1 offset is to skip the first member of struct es581_4_tx_can_msg. However, es581_4_urb_cmd already has a raw_msg field which can be used instead without the use of an offset calculation. The function es58x_fd_tx_can_msg() is also modified to mirror es581_tx_can_msg(). Link: https://lore.kernel.org/r/20210628155420.1176217-7-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: etas_es58x: use sizeof and sizeof_field macros instead of constant valuesVincent Mailhol
Replace two constant values by a call to sizeof{,_field} on the relevant field to make the logic easier to understand. Link: https://lore.kernel.org/r/20210628155420.1176217-6-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: etas_es58x: add es58x_free_netdevs() to factorize codeVincent Mailhol
Both es58x_probe() and es58x_disconnect() use a similar code snippet to release the netdev resources. Factorize it in an helper function named es58x_free_netdevs(). Link: https://lore.kernel.org/r/20210628155420.1176217-5-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: etas_es58x: use devm_kzalloc() to allocate device resourcesVincent Mailhol
Replace kzalloc() with devm_kzalloc(). By doing this, we do not need to care anymore about having to call kfree(). This result in a simpler and more easy to read code. Link: https://lore.kernel.org/r/20210628155420.1176217-4-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: etas_es58x: use error pointer during device probingVincent Mailhol
Make es58x_init_es58x_dev return a pointer to the allocated structure instead of returning an integer. Errors are handled through the helper function ERR_PTR and IS_ERR. This slightly simplifies the code. Link: https://lore.kernel.org/r/20210628155420.1176217-3-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: etas_es58x: fix three typos in author name and documentationVincent Mailhol
Change the author name from "lastname firstname" to "firstname lastname". Fix a typo in a variable name in the documentation of struct es58x_parameters::fifo_mask. Fix a typo in the title of the datasheet (E701 -> E70) and re-indent the comments. Link: https://lore.kernel.org/r/20210628155420.1176217-2-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: peak_usb: pcan_usb_decode_error(): upgrade handling of bus state changesStephane Grosjean
This patch updates old code by using the can_change_state() function published since by the socket-can module. In particular, this new code better manages the change of bus state by also using the value of the error counters that the driver now systematically asks for when initializing the channel. Link: https://lore.kernel.org/r/20210715142842.35793-1-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: peak_usb: pcan_usb_encode_msg(): add informationStephane Grosjean
This patch adds information by replacing a hard-coded values with its symbol and a adding comment. Link: https://lore.kernel.org/r/20210625130931.27438-5-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: peak_usb: PCAN-USB: add support of loopback and one-shot modeStephane Grosjean
The CAN - USB PCAN-USB interface is able to generate one-shot frames as well as loopback frames that it transmits starting from version 4.1 of its firmware. This patch adds support for the one-shot and loopback functionality to the driver, that can be activated if the embedded firmware allows it. If the driver detects that the PCAN-USB device runs an old firmware (< 4.1) it prints a message suggesting to contact <support@peak-system.com> for a possible firmware update. Link: https://lore.kernel.org/r/20210625130931.27438-3-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: peak_usb: pcan_usb_get_device_id(): read value only in case of successStephane Grosjean
In case of error, reading value from response argument is useless. Link: https://lore.kernel.org/r/20210625130931.27438-2-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: peak_pci: Add name and FW version of the card in kernel bufferStephane Grosjean
This patch adds name and (possibly) firmware version information to the kernel about the detected PEAK-System CAN - PCI/PCIe interface card. Link: https://lore.kernel.org/r/20210607151720.13571-1-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> [mkl: reformated struct pci_device_id peak_pci_tbl] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: peak_pci: fix checkpatch warningsMarc Kleine-Budde
This patch cleans several checkpatch warnings in the peak_pci driver. Cc: Stephane Grosjean <s.grosjean@peak-system.com> Link: https://lore.kernel.org/r/20210616102811.2449426-0-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: peak_pci: convert comments to network style commentsMarc Kleine-Budde
This patch converts all comments to network subsystem style comments. Cc: Stephane Grosjean <s.grosjean@peak-system.com> Link: https://lore.kernel.org/r/20210616102811.2449426-8-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25net: at91_can: fix the comments style issuePeng Li
Networking block comments don't use an empty /* line, use /* Comment... Block comments use * on subsequent lines. Block comments use a trailing */ on a separate line. This patch fixes the comments style issues. Link: https://lore.kernel.org/r/1624096589-13452-9-git-send-email-huangguangbin2@huawei.com Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25net: at91_can: remove redundant spacePeng Li
According to the chackpatch.pl, no space before tabs. Link: https://lore.kernel.org/r/1624096589-13452-8-git-send-email-huangguangbin2@huawei.com Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25net: at91_can: add braces {} to all arms of the statementPeng Li
Braces {} should be used on all arms of this statement. Link: https://lore.kernel.org/r/1624096589-13452-7-git-send-email-huangguangbin2@huawei.com Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25net: at91_can: fix the alignment issuePeng Li
Alignment should match open parenthesis. Link: https://lore.kernel.org/r/1624096589-13452-6-git-send-email-huangguangbin2@huawei.com Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25net: at91_can: use BIT macroPeng Li
This patch uses the BIT macro for setting individual bits, to fix the following checkpatch.pl issue: CHECK: Prefer using the BIT macro. Link: https://lore.kernel.org/r/1624096589-13452-5-git-send-email-huangguangbin2@huawei.com Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25net: at91_can: fix the code style issue about macroPeng Li
Macros with complex values should be enclosed in parentheses Link: https://lore.kernel.org/r/1624096589-13452-4-git-send-email-huangguangbin2@huawei.com Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25net: at91_can: add blank line after declarationsPeng Li
This patch fixes the checkpatch error about missing a blank line after declarations. Link: https://lore.kernel.org/r/1624096589-13452-3-git-send-email-huangguangbin2@huawei.com Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25net: at91_can: remove redundant blank linesPeng Li
This patch removes some redundant blank lines. Link: https://lore.kernel.org/r/1624096589-13452-2-git-send-email-huangguangbin2@huawei.com Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: at91_can: use DEVICE_ATTR_RW() helper macroZhen Lei
Use DEVICE_ATTR_RW() helper macro instead of plain DEVICE_ATTR(), which makes the code a bit shorter and easier to read. Link: https://lore.kernel.org/r/20210603100233.11877-1-thunder.leizhen@huawei.com Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: janz-ican3: use DEVICE_ATTR_RO/RW() helper macroZhen Lei
Use DEVICE_ATTR_RO/RW() helper macro instead of plain DEVICE_ATTR(), which makes the code a bit shorter and easier to read. Link: https://lore.kernel.org/r/20210603111739.11983-1-thunder.leizhen@huawei.com Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: esd_usb2: use DEVICE_ATTR_RO() helper macroZhen Lei
Use DEVICE_ATTR_RO() helper macro instead of plain DEVICE_ATTR(), which makes the code a bit shorter and easier to read. Link: https://lore.kernel.org/r/20210603110902.11930-1-thunder.leizhen@huawei.com Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: mcp251xfd: mcp251xfd_open(): request IRQ as sharedMarc Kleine-Budde
The driver's IRQ handler supports shared IRQs, so request a shared IRQ handler. Link: https://lore.kernel.org/r/20210724205212.737328-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: mcp251xfd: Fix header block to clarify independence from OFAndy Shevchenko
The driver is neither dependent on OF, nor it requires any OF headers. Fix header block to clarify independence from OF. Link: https://lore.kernel.org/r/http://lore.kernel.org/r/20210531084444.1785397-2-mkl@pengutronix.de Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: mcp251xfd: mcp251xfd_probe(): try to get crystal clock rate from propertyAndy Shevchenko
In some configurations, mainly ACPI-based, the clock frequency of the device is supplied by very well established 'clock-frequency' property. Hence, try to get it from the property at last if no other providers are available. Link: https://lore.kernel.org/r/20210531084444.1785397-1-mkl@pengutronix.de Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: m_can: remove support for custom bit timingMarc Kleine-Budde
Since commit aee2b3ccc8a6 ("can: tcan4x5x: fix bittiming const, use common bittiming from m_can driver") there is no use of the device specific bit timing parameters (m_can_classdev::bit_timing and struct m_can_classdev::data_timing). This patch removes the support for custom bit timing from the driver, as the common bit timing works for all known IP core implementations. Cc: Chandrasekar Ramakrishnan <rcsekar@samsung.com> Link: https://lore.kernel.org/r/20210616102811.2449426-7-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: m_can: use devm_platform_ioremap_resource_bynameYang Yingliang
Use the devm_platform_ioremap_resource_byname() helper instead of calling platform_get_resource_byname() and devm_ioremap_resource() separately. Link: https://lore.kernel.org/r/20210603073441.2983497-1-yangyingliang@huawei.com Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: m_can: Add support for transceiver as phyFaiz Abbas
Add support for implementing transceiver node as phy. The max_bitrate is obtained by getting a phy attribute. Link: https://lore.kernel.org/r/20210724174001.553047-1-mkl@pengutronix.de Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25dt-bindings: net: can: Document transceiver implementation as phyFaiz Abbas
Some transceivers need a configuration step (for example, pulling the standby or enable lines) for them to start sending messages. The transceiver can be implemented as a phy with the configuration done in the phy driver. The bit rate limitation can the be obtained by the driver using the phy node. Document the above implementation in the bosch mcan bindings. Link: https://lore.kernel.org/r/20210510052541.14168-2-a-govindraju@ti.com Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: netlink: remove redundant check in can_validate()Vincent Mailhol
can_validate() does a first check: | if (is_can_fd) { | if (!data[IFLA_CAN_BITTIMING] || !data[IFLA_CAN_DATA_BITTIMING]) | return -EOPNOTSUPP; | } If that first if succeeds, we know that if is_can_fd is true then data[IFLA_CAN_BITTIMING is set. However, the next if switch does not leverage on above knowledge and redoes the check: | if (data[IFLA_CAN_DATA_BITTIMING]) { | if (!is_can_fd || !data[IFLA_CAN_BITTIMING]) | ^~~~~~~~~~~~~~~~~~~~~~~~ | return -EOPNOTSUPP; | } This patch removes that redundant check. Link: https://lore.kernel.org/r/20210603151550.140727-2-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: netlink: clear data_bittiming if FD is turned offVincent Mailhol
When the FD is turned off through the netlink interface, the data bit timing values still remain in data_bittiming and are displayed despite of the feature being disabled. Example: | $ ip link set can0 type can bitrate 500000 dbitrate 2000000 fd on | $ ip --details link show can0 | 1: can0: <NOARP,ECHO> mtu 72 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 10 | link/can promiscuity 0 minmtu 0 maxmtu 0 | can <FD> state STOPPED restart-ms 0 | bitrate 500000 sample-point 0.875 | tq 12 prop-seg 69 phase-seg1 70 phase-seg2 20 sjw 1 | ES582.1/ES584.1: tseg1 2..256 tseg2 2..128 sjw 1..128 brp 1..512 brp-inc 1 | dbitrate 2000000 dsample-point 0.750 | dtq 12 dprop-seg 14 dphase-seg1 15 dphase-seg2 10 dsjw 1 | ES582.1/ES584.1: dtseg1 2..32 dtseg2 1..16 dsjw 1..8 dbrp 1..32 dbrp-inc 1 | clock 80000000 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 | | $ ip link set can0 type can bitrate 500000 fd off | $ ip --details link show can0 | 1: can0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 10 | link/can promiscuity 0 minmtu 0 maxmtu 0 | can state STOPPED restart-ms 0 | bitrate 500000 sample-point 0.875 | tq 12 prop-seg 69 phase-seg1 70 phase-seg2 20 sjw 1 | ES582.1/ES584.1: tseg1 2..256 tseg2 2..128 sjw 1..128 brp 1..512 brp-inc 1 | dbitrate 2000000 dsample-point 0.750 | dtq 12 dprop-seg 14 dphase-seg1 15 dphase-seg2 10 dsjw 1 | ES582.1/ES584.1: dtseg1 2..32 dtseg2 1..16 dsjw 1..8 dbrp 1..32 dbrp-inc 1 | clock 80000000 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 Remark: once FD is turned off, it is not possible to turn fd back on and reuse the previously input data bit timing values: | $ ip link set can0 type can bitrate 500000 fd on | RTNETLINK answers: Operation not supported This means that the user will need to re-configure the data bit timing in order to turn fd on again. Because old data bit timing values cannot be reused, this patch clears priv->data_bit timing whenever FD is turned off. This way, the data bit timing variables are not displayed anymore. Link: https://lore.kernel.org/r/20210618081904.141114-2-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: bittiming: fix documentation for struct can_tdcMarc Kleine-Budde
This patch fixes a typo in the documentation for struct can_tdc::tdcv. The number "0" refers to automatic mode not the letter "O". Further two grammar errors in the documentation for struct can_tdc are fixed. First grammar error: add a missing third person 's'. Second grammar error: replace "such as" by "such that". The intent is to give a condition, not an example. Fixes: 289ea9e4ae59 ("can: add new CAN FD bittiming parameters: Transmitter Delay Compensation (TDC)") Link: https://lore.kernel.org/r/20210616095922.2430415-1-mkl@pengutronix.de Link: https://lore.kernel.org/r/20210616124057.60723-1-mailhol.vincent@wanadoo.fr Co-developed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: rx-offload: can_rx_offload_threaded_irq_finish(): add new function to ↵Marc Kleine-Budde
be called from threaded interrupt After reading all CAN frames from the controller in the IRQ handler and storing them into a skb_queue, the driver calls napi_schedule(). In the napi poll function the skb from the skb_queue are then pushed into the networking stack. However if napi_schedule() is called from a threaded IRQ handler this triggers the following error: | NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! To avoid this, create a new rx-offload function (can_rx_offload_threaded_irq_finish()) with a call to local_bh_disable()/local_bh_enable() around the napi_schedule() call. Convert all drivers that call can_rx_offload_irq_finish() from threaded IRQ context to can_rx_offload_threaded_irq_finish(). Link: https://lore.kernel.org/r/20210724204745.736053-4-mkl@pengutronix.de Suggested-by: Daniel Glöckner <dg@emlix.com> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: rx-offload: can_rx_offload_irq_finish(): directly call napi_schedule()Marc Kleine-Budde
Instead of calling can_rx_offload_schedule() call napi_schedule() directly. As this was the last use of can_rx_offload_schedule() remove this helper function. Link: https://lore.kernel.org/r/20210724204745.736053-3-mkl@pengutronix.de Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: rx-offload: add skb queue for use during ISRMarc Kleine-Budde
Adding a skb to the skb_queue in rx-offload requires to take a lock. This commit avoids this by adding an unlocked skb queue that is appended at the end of the ISR. Having one lock at the end of the ISR should be OK as the HW is empty, not about to overflow. Link: https://lore.kernel.org/r/20210724204745.736053-2-mkl@pengutronix.de Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Co-developed-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: j1939: j1939_xtp_rx_dat_one(): use separate pointer for session skb ↵Marc Kleine-Budde
control buffer In the j1939_xtp_rx_dat_one() function, there are 2 variables (skb and se_skb) holding a skb. The control buffer of the skbs is accessed one after the other, but using the same "skcb" variable. To avoid confusion introduce a new variable "se_skcb" to access the se_skb's control buffer as done in the rest of this file, too. Cc: Robin van der Gracht <robin@protonic.nl> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20210616102811.2449426-6-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: j1939: j1939_session_tx_dat(): use consistent name se_skcb for session ↵Marc Kleine-Budde
skb control buffer This patch changes the name of the "skcb" variable in j1939_session_tx_dat() to "se_skcb" as it's the session skb's control buffer. The same name is used in other functions for the session skb's control buffer. Cc: Robin van der Gracht <robin@protonic.nl> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20210616102811.2449426-5-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: j1939: j1939_session_completed(): use consistent name se_skb for the ↵Marc Kleine-Budde
session skb This patch changes the name of the "skb" variable in j1939_session_completed() to "se_skb" as it's the session skb. The same name is used in other functions for the session skb. Cc: Robin van der Gracht <robin@protonic.nl> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20210616102811.2449426-4-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: j1939: replace fall through comment by fallthrough pseudo-keywordMarc Kleine-Budde
Replace the existing /* fall through */ comments the new pseudo-keyword macro fallthrough. Cc: Robin van der Gracht <robin@protonic.nl> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20210616102811.2449426-3-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: j1939: fix checkpatch warningsMarc Kleine-Budde
This patch fixes a checkpatch warning about a long line and wrong indention. Cc: Robin van der Gracht <robin@protonic.nl> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20210616102811.2449426-2-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: j1939: j1939_sk_sock_destruct(): correct a grammatical errorgushengxian
Correct a grammatical error. Link: https://lore.kernel.org/r/20210611043933.17047-1-13145886936@163.com Signed-off-by: gushengxian <gushengxian@yulong.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25octeontx2-pf: Dont enable backpressure on LBK linksHariprasad Kelam
Avoid configure backpressure for LBK links as they don't support it and enable lmacs before configuration pause frames. Fixes: 75f36270990c ("octeontx2-pf: Support to enable/disable pause frames via ethtool") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-25octeontx2-pf: Fix interface down flag on errorGeetha sowjanya
In the existing code while changing the number of TX/RX queues using ethtool the PF/VF interface resources are freed and reallocated (otx2_stop and otx2_open is called) if the device is in running state. If any resource allocation fails in otx2_open, driver free already allocated resources and return. But again, when the number of queues changes as the device state still running oxt2_stop is called. In which we try to free already freed resources leading to driver crash. This patch fixes the issue by setting the INTF_DOWN flag on error and free the resources in otx2_stop only if the flag is not set. Fixes: 50fe6c02e5ad ("octeontx2-pf: Register and handle link notifications") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <Sunil.Goutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-25octeontx2-af: Fix PKIND overlap between LBK and LMAC interfacesGeetha sowjanya
Currently PKINDs are not assigned to LBK channels. The default value of LBK_CHX_PKIND (channel to PKIND mapping) register is zero, which is resulting in a overlap of pkind between LBK and CGX LMACs. When KPU1 parser config is modified when PTP timestamping is enabled on the CGX LMAC interface it is impacting traffic on LBK interfaces as well. This patch fixes the issue by reserving the PKIND#0 for LBK devices. CGX mapped PF pkind starts from 1 and also fixes the max pkind available. Fixes: 421572175ba5 ("octeontx2-af: Support to enable/disable HW timestamping") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 01:57:16 +0000