summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-15cifs: fix crash in smb2_compound_op()/smb2_set_next_command()Ronnie Sahlberg
RHBZ: 1722704 In low memory situations the various SMB2_*_init() functions can fail to allocate a request PDU and thus leave the request iovector as NULL. If we don't check the return code for failure we end up calling smb2_set_next_command() with a NULL iovector causing a crash when it tries to dereference it. CC: Stable <stable@vger.kernel.org> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-07-15Merge tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "The biggest thing in this is the AMD Navi GPU support, this again contains a bunch of header files that are large. These are the new AMD RX5700 GPUs that just recently became available. New drivers: - ST-Ericsson MCDE driver - Ingenic JZ47xx SoC UAPI change: - HDR source metadata property Core: - HDR inforframes and EDID parsing - drm hdmi infoframe unpacking - remove prime sg_table caching into dma-buf - New gem vram helpers to reduce driver code - Lots of drmP.h removal - reservation fencing fix - documentation updates - drm_fb_helper_connector removed - mode name command handler rewrite fbcon: - Remove the fbcon notifiers ttm: - forward progress fixes dma-buf: - make mmap call optional - debugfs refcount fixes - dma-fence free with pending signals fix - each dma-buf gets an inode Panels: - Lots of additional panel bindings amdgpu: - initial navi10 support - avoid hw reset - HDR metadata support - new thermal sensors for vega asics - RAS fixes - use HMM rather than MMU notifier - xgmi topology via kfd - SR-IOV fixes - driver reload fixes - DC use a core bpc attribute - Aux fixes for DC - Bandwidth calc updates for DC - Clock handling refactor - kfd VEGAM support vmwgfx: - Coherent memory support changes i915: - HDR Support - HDMI i2c link - Icelake multi-segmented gamma support - GuC firmware update - Mule Creek Canyon PCH support for EHL - EHL platform updtes - move i915.alpha_support to i915.force_probe - runtime PM refactoring - VBT parsing refactoring - DSI fixes - struct mutex dependency reduction - GEM code reorg mali-dp: - Komeda driver features msm: - dsi vs EPROBE_DEFER fixes - msm8998 snapdragon 835 support - a540 gpu support - mdp5 and dpu interconnect support exynos: - drmP.h removal tegra: - misc fixes tda998x: - audio support improvements - pixel repeated mode support - quantisation range handling corrections - HDMI vendor info fix armada: - interlace support fix - overlay/video plane register handling refactor - add gamma support rockchip: - RX3328 support panfrost: - expose perf counters via hidden ioctls vkms: - enumerate CRC sources list ast: - rework BO handling mgag200: - rework BO handling dw-hdmi: - suspend/resume support rcar-du: - R8A774A1 Soc Support - LVDS dual-link mode support - Additional formats - Misc fixes omapdrm: - DSI command mode display support stm - fb modifier support - runtime PM support sun4i: - use vmap ops vc4: - binner bo binding rework v3d: - compute shader support - resync/sync fixes - job management refactoring lima: - NULL pointer in irq handler fix - scheduler default timeout virtio: - fence seqno support - trace events bochs: - misc fixes tc458767: - IRQ/HDP handling sii902x: - HDMI audio support atmel-hlcdc: - misc fixes meson: - zpos support" * tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm: (1815 commits) Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next" Revert "mm: adjust apply_to_pfn_range interface for dropped token." mm: adjust apply_to_pfn_range interface for dropped token. drm/amdgpu/navi10: add uclk activity sensor drm/amdgpu: properly guard the generic discovery code drm/amdgpu: add missing documentation on new module parameters drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback drm/amd/display: avoid 64-bit division drm/amdgpu/psp11: simplify the ucode register logic drm/amdgpu: properly guard DC support in navi code drm/amd/powerplay: vega20: fix uninitialized variable use drm/amd/display: dcn20: include linux/delay.h amdgpu: make pmu support optional drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq drm/amd/powerplay: Use memset to initialize metrics structs drm/amdgpu/mes10.1: Fix header guard drm/amd/powerplay: add temperature sensor support for navi10 drm/amdgpu: fix scheduler timeout calc drm/amdgpu: Prepare for hmm_range_register API change (v2) ...
2019-07-15ARM: dts: gemini: Set DIR-685 SPI CS as active lowLinus Walleij
The SPI to the display on the DIR-685 is active low, we were just saved by the SPI library enforcing active low on everything before, so set it as active low to avoid ambiguity. Link: https://lore.kernel.org/r/20190715202101.16060-1-linus.walleij@linaro.org Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-15ARM: stm32: use "depends on" instead of "if" after promptMasahiro Yamada
This appeared after the global fixups by commit e32465429490 ("ARM: use "depends on" for SoC configs instead of "if" after prompt"). Fix it now. Link: https://lore.kernel.org/r/20190710051320.8738-1-yamada.masahiro@socionext.com Fixes: e32465429490 ("ARM: use "depends on" for SoC configs instead of "if" after prompt") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-15Merge branch 'for-arm-soc' of git://git.armlinux.org.uk/~rmk/linux-arm into ↵Olof Johansson
arm/soc * 'for-arm-soc' of git://git.armlinux.org.uk/~rmk/linux-arm: (21 commits) ARM: sa1100: convert to common clock framework ARM: riscpc: enable chained scatterlist support ARM: riscpc: reduce IRQ handling code ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc ARM: riscpc: parse video information from tagged list ARM: riscpc: add ecard quirk for Atomwide 3port serial card ARM: sa1100/neponset: convert serial to use gpiod APIs ARM: sa1100/hackkit: remove empty serial mctrl functions ARM: sa1100/badge4: remove commented out modem control initialisers ARM: sa1100/h3xxx: convert serial to gpiod APIs ARM: sa1100/assabet: convert serial to gpiod APIs serial: sa1100: add note about modem control signals serial: sa1100: add support for mctrl gpios ARM: riscpc: dma: use __iomem pointers for writing DMA ARM: riscpc: dma: improve address/length writing ARM: riscpc: dma: make state a local variable ARM: riscpc: dma: eliminate "cur_sg" scatterlist usage ARM: riscpc: fix DMA ARM: riscpc: fix ecard printing ARM: riscpc: fix lack of keyboard interrupts after irq conversion ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-15Merge tag 'mlx5-fixes-2019-07-15' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mameed says: ==================== Mellanox, mlx5 fixes 2019-07-15 This pull request provides mlx5 TC flower and tunnel fixes for kernel 5.2 from Eli and Vlad. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-16selftests/bpf: remove logic duplication in test_verifierAndrii Nakryiko
test_verifier tests can specify single- and multi-runs tests. Internally logic of handling them is duplicated. Get rid of it by making single run retval/data specification to be a first run spec. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Cc: Krzesimir Nowak <krzesimir@kinvolk.io> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-15Merge branch 'bpf-fix-wide-loads-sockaddr'Daniel Borkmann
Stanislav Fomichev says: ==================== When fixing selftests by adding support for wide stores, Yonghong reported that he had seen some examples where clang generates single u64 loads for two adjacent u32s as well: http://lore.kernel.org/netdev/a66c937f-94c0-eaf8-5b37-8587d66c0c62@fb.com Fix this to support aligned u64 reads for some bpf_sock_addr fields as well. ==================== Acked-by: Andrii Narkyiko <andriin@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-15bpf: sync bpf.h to tools/Stanislav Fomichev
Update bpf_sock_addr comments to indicate support for 8-byte reads from user_ip6 and msg_src_ip6. Cc: Yonghong Song <yhs@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-15selftests/bpf: add selftests for wide loadsStanislav Fomichev
Mirror existing wide store tests with wide loads. The only significant difference is expected error string. Cc: Yonghong Song <yhs@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-15selftests/bpf: rename verifier/wide_store.c to verifier/wide_access.cStanislav Fomichev
Move the file and rename internal BPF_SOCK_ADDR define to BPF_SOCK_ADDR_STORE. This selftest will be extended in the next commit with the wide loads. Cc: Yonghong Song <yhs@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-15bpf: allow wide aligned loads for bpf_sock_addr user_ip6 and msg_src_ip6Stanislav Fomichev
Add explicit check for u64 loads of user_ip6 and msg_src_ip6 and update the comment. Cc: Yonghong Song <yhs@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-15bpf: rename bpf_ctx_wide_store_ok to bpf_ctx_wide_access_okStanislav Fomichev
Rename bpf_ctx_wide_store_ok to bpf_ctx_wide_access_ok to indicate that it can be used for both loads and stores. Cc: Yonghong Song <yhs@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-15samples/bpf: build with -D__TARGET_ARCH_$(SRCARCH)Ilya Leoshkevich
While $ARCH can be relatively flexible (see Makefile and tools/scripts/Makefile.arch), $SRCARCH always corresponds to a directory name under arch/. Therefore, build samples with -D__TARGET_ARCH_$(SRCARCH), since that matches the expectations of bpf_helpers.h. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-15selftests/bpf: put test_stub.o into $(OUTPUT)Ilya Leoshkevich
Add a rule to put test_stub.o in $(OUTPUT) and change the references to it accordingly. This prevents test_stub.o from being created in the source directory. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-15selftests/bpf: make directory prerequisites order-onlyIlya Leoshkevich
When directories are used as prerequisites in Makefiles, they can cause a lot of unnecessary rebuilds, because a directory is considered changed whenever a file in this directory is added, removed or modified. If the only thing a target is interested in is the existence of the directory it depends on, which is the case for selftests/bpf, this directory should be specified as an order-only prerequisite: it would still be created in case it does not exist, but it would not trigger a rebuild of a target in case it's considered changed. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-15selftests/bpf: fix attach_probe on s390Ilya Leoshkevich
attach_probe test fails, because it cannot install a kprobe on a non-existent sys_nanosleep symbol. Use the correct symbol name for the nanosleep syscall on 64-bit s390. Don't bother adding one for 31-bit mode, since tests are compiled only in 64-bit mode. Fixes: 1e8611bbdfc9 ("selftests/bpf: add kprobe/uprobe selftests") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-15Merge branch 'bpf-btf-size-verification-fix'Daniel Borkmann
Andrii Nakryiko says: ==================== BTF size resolution logic isn't always resolving type size correctly, leading to erroneous map creation failures due to value size mismatch. This patch set: 1. fixes the issue (patch #1); 2. adds tests for trickier cases (patch #2); 3. and converts few test cases utilizing BTF-defined maps, that previously couldn't use typedef'ed arrays due to kernel bug (patch #3). ==================== Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-15selftests/bpf: use typedef'ed arrays as map valuesAndrii Nakryiko
Convert few tests that couldn't use typedef'ed arrays due to kernel bug. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-15selftests/bpf: add trickier size resolution testsAndrii Nakryiko
Add more BTF tests, validating that size resolution logic is correct in few trickier cases. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-15bpf: fix BTF verifier size resolution logicAndrii Nakryiko
BTF verifier has a size resolution bug which in some circumstances leads to invalid size resolution for, e.g., TYPEDEF modifier. This happens if we have [1] PTR -> [2] TYPEDEF -> [3] ARRAY, in which case due to being in pointer context ARRAY size won't be resolved (because for pointer it doesn't matter, so it's a sink in pointer context), but it will be permanently remembered as zero for TYPEDEF and TYPEDEF will be marked as RESOLVED. Eventually ARRAY size will be resolved correctly, but TYPEDEF resolved_size won't be updated anymore. This, subsequently, will lead to erroneous map creation failure, if that TYPEDEF is specified as either key or value, as key_size/value_size won't correspond to resolved size of TYPEDEF (kernel will believe it's zero). Note, that if BTF was ordered as [1] ARRAY <- [2] TYPEDEF <- [3] PTR, this won't be a problem, as by the time we get to TYPEDEF, ARRAY's size is already calculated and stored. This bug manifests itself in rejecting BTF-defined maps that use array typedef as a value type: typedef int array_t[16]; struct { __uint(type, BPF_MAP_TYPE_ARRAY); __type(value, array_t); /* i.e., array_t *value; */ } test_map SEC(".maps"); The fix consists on not relying on modifier's resolved_size and instead using modifier's resolved_id (type ID for "concrete" type to which modifier eventually resolves) and doing size determination for that resolved type. This allow to preserve existing "early DFS termination" logic for PTR or STRUCT_OR_ARRAY contexts, but still do correct size determination for modifier types. Fixes: eb3f595dab40 ("bpf: btf: Validate type reference") Cc: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-15net/mlx5e: Allow dissector meta key in tc flowerVlad Buslov
Recently, fl_flow_key->indev_ifindex int field was refactored into flow_dissector_key_meta field. With this, flower classifier also sets FLOW_DISSECTOR_KEY_META flow dissector key. However, mlx5 flower dissector validation code rejects filters that use flow dissector keys that are not supported. Add FLOW_DISSECTOR_KEY_META to the list of allowed dissector keys in __parse_cls_flower() to prevent following error when offloading flower classifier to mlx5: Error: mlx5_core: Unsupported key. Fixes: 8212ed777f40 ("net: sched: cls_flower: use flow_dissector for ingress ifindex") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-15net/mlx5e: Rely on filter_dev instead of dissector keys for tunnelsVlad Buslov
Currently, tunnel attributes are parsed and inner header matching is used only when flow dissector specifies match on some of the supported encapsulation fields. When user tries to offload tc filter that doesn't match any encapsulation fields on tunnel device, mlx5 tc layer incorrectly sets to match packet header keys on encap header (outer header) and firmware rejects the rule with syndrome 0x7e1579 when creating new flow group. Change __parse_cls_flower() to determine whether tunnel is used based on fitler_dev tunnel info, instead of determining it indirectly by checking flow dissector enc keys. Fixes: bbd00f7e2349 ("net/mlx5e: Add TC tunnel release action for SRIOV offloads") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-15net/mlx5e: Verify encapsulation is supportedEli Cohen
When mlx5e_attach_encap() calls mlx5e_get_tc_tun() to get the tunnel info data struct, check that returned value is not NULL, as would be in the case of unsupported encapsulation. Fixes: d386939a327d2 ("net/mlx5e: Rearrange tc tunnel code in a modular way") Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-15KVM: nVMX: Ignore segment base for VMX memory operand when segment not FS or GSLiran Alon
As reported by Maxime at https://bugzilla.kernel.org/show_bug.cgi?id=204175: In vmx/nested.c::get_vmx_mem_address(), when the guest runs in long mode, the base address of the memory operand is computed with a simple: *ret = s.base + off; This is incorrect, the base applies only to FS and GS, not to the others. Because of that, if the guest uses a VMX instruction based on DS and has a DS.base that is non-zero, KVM wrongfully adds the base to the resulting address. Reported-by: Maxime Villard <max@m00nbsd.net> Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-15kvm: x86: ioapic and apic debug macros cleanupYi Wang
The ioapic_debug and apic_debug have been not used for years, and kvm tracepoints are enough for debugging, so remove them as Paolo suggested. However, there may be something wrong when pv evi get/put user, so it's better to retain some log there. Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-15ISDN: hfcsusb: checking idx of ep configurationPhong Tran
The syzbot test with random endpoint address which made the idx is overflow in the table of endpoint configuations. this adds the checking for fixing the error report from syzbot KASAN: stack-out-of-bounds Read in hfcsusb_probe [1] The patch tested by syzbot [2] Reported-by: syzbot+8750abbc3a46ef47d509@syzkaller.appspotmail.com [1]: https://syzkaller.appspot.com/bug?id=30a04378dac680c5d521304a00a86156bb913522 [2]: https://groups.google.com/d/msg/syzkaller-bugs/_6HBdge8F3E/OJn7wVNpBAAJ Signed-off-by: Phong Tran <tranmanphong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-16Revert "Merge branch 'vmwgfx-next' of ↵Dave Airlie
git://people.freedesktop.org/~thomash/linux into drm-next" This reverts commit 031e610a6a21448a63dff7a0416e5e206724caac, reversing changes made to 52d2d44eee8091e740d0d275df1311fb8373c9a9. The mm changes in there we premature and not fully ack or reviewed by core mm folks, I dropped the ball by merging them via this tree, so lets take em all back out. Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-07-16Revert "mm: adjust apply_to_pfn_range interface for dropped token."Dave Airlie
This reverts commit 6dfc43d3a19174faead54575c204aee106225f43. Going to revert the whole vmwwgfx pull. Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-07-15vmxnet3: Remove call to memset after dma_alloc_coherentFuqian Huang
In commit 518a2f1925c3 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So memset is not needed. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-15hippi: Remove call to memset after pci_alloc_consistentFuqian Huang
pci_alloc_consistent calls dma_alloc_coherent directly. In commit 518a2f1925c3 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So memset is not needed. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-15ethernet: remove redundant memsetFuqian Huang
kvzalloc already zeroes the memory during the allocation. pci_alloc_consistent calls dma_alloc_coherent directly. In commit 518a2f1925c3 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So the memset after these function is not needed. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-15atm: idt77252: Remove call to memset after dma_alloc_coherentFuqian Huang
In commit 518a2f1925c3 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So memset is not needed. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-15net: neigh: fix multiple neigh timer schedulingLorenzo Bianconi
Neigh timer can be scheduled multiple times from userspace adding multiple neigh entries and forcing the neigh timer scheduling passing NTF_USE in the netlink requests. This will result in a refcount leak and in the following dump stack: [ 32.465295] NEIGH: BUG, double timer add, state is 8 [ 32.465308] CPU: 0 PID: 416 Comm: double_timer_ad Not tainted 5.2.0+ #65 [ 32.465311] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-2.fc30 04/01/2014 [ 32.465313] Call Trace: [ 32.465318] dump_stack+0x7c/0xc0 [ 32.465323] __neigh_event_send+0x20c/0x880 [ 32.465326] ? ___neigh_create+0x846/0xfb0 [ 32.465329] ? neigh_lookup+0x2a9/0x410 [ 32.465332] ? neightbl_fill_info.constprop.0+0x800/0x800 [ 32.465334] neigh_add+0x4f8/0x5e0 [ 32.465337] ? neigh_xmit+0x620/0x620 [ 32.465341] ? find_held_lock+0x85/0xa0 [ 32.465345] rtnetlink_rcv_msg+0x204/0x570 [ 32.465348] ? rtnl_dellink+0x450/0x450 [ 32.465351] ? mark_held_locks+0x90/0x90 [ 32.465354] ? match_held_lock+0x1b/0x230 [ 32.465357] netlink_rcv_skb+0xc4/0x1d0 [ 32.465360] ? rtnl_dellink+0x450/0x450 [ 32.465363] ? netlink_ack+0x420/0x420 [ 32.465366] ? netlink_deliver_tap+0x115/0x560 [ 32.465369] ? __alloc_skb+0xc9/0x2f0 [ 32.465372] netlink_unicast+0x270/0x330 [ 32.465375] ? netlink_attachskb+0x2f0/0x2f0 [ 32.465378] netlink_sendmsg+0x34f/0x5a0 [ 32.465381] ? netlink_unicast+0x330/0x330 [ 32.465385] ? move_addr_to_kernel.part.0+0x20/0x20 [ 32.465388] ? netlink_unicast+0x330/0x330 [ 32.465391] sock_sendmsg+0x91/0xa0 [ 32.465394] ___sys_sendmsg+0x407/0x480 [ 32.465397] ? copy_msghdr_from_user+0x200/0x200 [ 32.465401] ? _raw_spin_unlock_irqrestore+0x37/0x40 [ 32.465404] ? lockdep_hardirqs_on+0x17d/0x250 [ 32.465407] ? __wake_up_common_lock+0xcb/0x110 [ 32.465410] ? __wake_up_common+0x230/0x230 [ 32.465413] ? netlink_bind+0x3e1/0x490 [ 32.465416] ? netlink_setsockopt+0x540/0x540 [ 32.465420] ? __fget_light+0x9c/0xf0 [ 32.465423] ? sockfd_lookup_light+0x8c/0xb0 [ 32.465426] __sys_sendmsg+0xa5/0x110 [ 32.465429] ? __ia32_sys_shutdown+0x30/0x30 [ 32.465432] ? __fd_install+0xe1/0x2c0 [ 32.465435] ? lockdep_hardirqs_off+0xb5/0x100 [ 32.465438] ? mark_held_locks+0x24/0x90 [ 32.465441] ? do_syscall_64+0xf/0x270 [ 32.465444] do_syscall_64+0x63/0x270 [ 32.465448] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fix the issue unscheduling neigh_timer if selected entry is in 'IN_TIMER' receiving a netlink request with NTF_USE flag set Reported-by: Marek Majkowski <marek@cloudflare.com> Fixes: 0c5c2d308906 ("neigh: Allow for user space users of the neighbour table") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-15rt2x00usb: fix rx queue hangSoeren Moch
Since commit ed194d136769 ("usb: core: remove local_irq_save() around ->complete() handler") the handler rt2x00usb_interrupt_rxdone() is not running with interrupts disabled anymore. So this completion handler is not guaranteed to run completely before workqueue processing starts for the same queue entry. Be sure to set all other flags in the entry correctly before marking this entry ready for workqueue processing. This way we cannot miss error conditions that need to be signalled from the completion handler to the worker thread. Note that rt2x00usb_work_rxdone() processes all available entries, not only such for which queue_work() was called. This patch is similar to what commit df71c9cfceea ("rt2x00: fix order of entry flags modification") did for TX processing. This fixes a regression on a RT5370 based wifi stick in AP mode, which suddenly stopped data transmission after some period of heavy load. Also stopping the hanging hostapd resulted in the error message "ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 14 failed to flush". Other operation modes are probably affected as well, this just was the used testcase. Fixes: ed194d136769 ("usb: core: remove local_irq_save() around ->complete() handler") Cc: stable@vger.kernel.org # 4.20+ Signed-off-by: Soeren Moch <smoch@web.de> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-07-15ath10k: work around uninitialized vht_pfr variableArnd Bergmann
As clang points out, the vht_pfr is assigned to a struct member without being initialized in one case: drivers/net/wireless/ath/ath10k/mac.c:7528:7: error: variable 'vht_pfr' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] if (!ath10k_mac_can_set_bitrate_mask(ar, band, mask, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/ath/ath10k/mac.c:7551:20: note: uninitialized use occurs here arvif->vht_pfr = vht_pfr; ^~~~~~~ drivers/net/wireless/ath/ath10k/mac.c:7528:3: note: remove the 'if' if its condition is always true if (!ath10k_mac_can_set_bitrate_mask(ar, band, mask, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/ath/ath10k/mac.c:7483:12: note: initialize the variable 'vht_pfr' to silence this warning u8 vht_pfr; Add an explicit but probably incorrect initialization here. I suspect we want a better fix here, but chose this approach to illustrate the issue. Fixes: 8b97b055dc9d ("ath10k: fix failure to set multiple fixed rate") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-07-15iwlwifi: pcie: add support for qu c-step devicesLuca Coelho
Add support for C-step devices. Currently we don't have a nice way of matching the step and choosing the proper configuration, so we need to switch the config structs one by one. Cc: stable@vger.kernel.org Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-07-15iwlwifi: add new cards for 9000 and 20000 seriesIhab Zhaika
add two new PCI ID's for 9000 and 20000 series Cc: stable@vger.kernel.org Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-07-15Input: alps - don't handle ALPS cs19 trackpoint-only deviceHui Wang
On a latest Lenovo laptop, the trackpoint and 3 buttons below it don't work at all, when we move the trackpoint or press those 3 buttons, the kernel will print out: "Rejected trackstick packet from non DualPoint device" This device is identified as an alps touchpad but the packet has trackpoint format, so the alps.c drops the packet and prints out the message above. According to XiaoXiao's explanation, this device is named cs19 and is trackpoint-only device, its firmware is only for trackpoint, it is independent of touchpad and is a device completely different from DualPoint ones. To drive this device with mininal changes to the existing driver, we just let the alps driver not handle this device, then the trackpoint.c will be the driver of this device if the trackpoint driver is enabled. (if not, this device will fallback to a bare PS/2 device) With the trackpoint.c, this trackpoint and 3 buttons all work well, they have all features that the trackpoint should have, like scrolling-screen, drag-and-drop and frame-selection. Signed-off-by: XiaoXiao Liu <sliuuxiaonxiao@gmail.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-15Input: hyperv-keyboard - remove dependencies on PAGE_SIZE for ring bufferMaya Nakamura
Define the ring buffer size as a constant expression because it should not depend on the guest page size. Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-15Input: adp5589 - initialize GPIO controller parent deviceLars-Peter Clausen
While not strictly required for normal operation setting the GPIO parent device allows the GPIO framework to generate more verbose debug output for the GPIO chip. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-15Input: iforce - remove empty multiline commentsTim Schumacher
Those are remnants of the SPDX identifier migration, which haven't been removed properly. Signed-off-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-15Merge tag 'v5.2' into nextDmitry Torokhov
Sync up with mainline to resolve conflicts in iforce driver.
2019-07-15Input: synaptics - fix misuse of strlcpyJoe Perches
Probable cut&paste typo - use the correct field size. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-15Documentation: filesystem: Convert xfs.txt to ReSTSheriff Esseson
Move xfs.txt to admin-guide, convert xfs.txt to ReST and broken references Signed-off-by: Sheriff Esseson <sheriffesseson@gmail.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-07-15iomap: start moving code to fs/iomap/Darrick J. Wong
Create the build infrastructure we need to start migrating iomap code to fs/iomap/ from fs/iomap.c. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-07-15Revert "x86/ptrace: Prevent ptrace from clearing the FS/GS selector" and fix ↵Andy Lutomirski
the test This reverts commit 48f5e52e916b55fb73754833efbacc7f8081a159. The ptrace ABI change was a prerequisite to the proposed design for FSGSBASE. Since FSGSBASE support has been reverted, and since I'm not convinced that the ABI was ever adequately tested, revert the ABI change as well. This also modifies the test case so that it tests the preexisting behavior. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/fca39c478ea7fb15bc76fe8a36bd180810a067f6.1563200250.git.luto@kernel.org
2019-07-15xfs: sync up xfs_trans_inode with userspaceEric Sandeen
Add an XFS_ICHGTIME_CREATE case to xfs_trans_ichgtime() to keep in sync with userspace. (Currently no kernel caller sends this flag.) Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-07-15xfs: move xfs_trans_inode.c to libxfs/Eric Sandeen
Userspace now has an identical xfs_trans_inode.c which it has already moved to libxfs/ so do the same move for kernelspace. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-07-15LSM: SafeSetID: fix use of literal -1 in capable hookJann Horn
The capable() hook returns an error number. -EPERM is actually the same as -1, so this doesn't make a difference in behavior. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Micah Morton <mortonm@chromium.org>
generated by cgit (git 2.34.1) at 2025-09-13 21:41:21 +0000