summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-11-23drm/amdgpu: update documentation of parameter amdgpu_gtt_sizeZhenGuo Yin
Fixes: f7ba887f606b ("drm/amdgpu: Adjust logic around GTT size (v3)") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amdgpu/vcn: re-use original vcn0 doorbell valueJane Jian
root cause that S2A need to use deduct offset flag. after setting this flag, vcn0 doorbell value works. so return it as before Signed-off-by: Jane Jian <Jane.Jian@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amdgpu: add the fan abnormal detection featurelyndonli
Update the SW CTF limit from existing register when there's a fan failure detected via SMU interrupt. Signed-off-by: lyndonli <Lyndon.Li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/pm: update driver if header for smu_13_0_7lyndonli
update driver if header for smu_13_0_7 Signed-off-by: lyndonli <Lyndon.Li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/pm: Enable bad memory page/channel recording support for smu v13_0_0Candice Li
Send message to SMU to update bad memory page and bad channel info. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: 3.2.213Aric Cyr
This version brings along following fixes: -Add configuration 2 for ABM 2.3/2.4. -Add margin for HUBP for SubVp + DRR. -Fix no display after resume from WB/CB. -Limit HW cursor size to be less than 64 x 64 bytes when the stream is >= 4K. -Lower watermarks for enter/enter+exit latency. -Update support types for DCN314 to include z8 only and z8_z10 only state. -Add new value for soc bounding box and dummy pstate. -Override fclk chang latency when calculating prefetch schedule for subvp with low uclk. -Add check for DET fetch latency for dcn32. -Add check if PSR enabled when entering MALL. -Use base MALL allocation size calculations off vewport height. -Add YCBCR2020 to CSC matrix. -Implement DP-Tx portion to interact with DPIA. -Add debug option for increasing phantom lines. -Fix phantom plane/stream retain after fail validation. -Fix display corruption with VSR enable. -Set valid divider value for virtual and FRL/DP2. -Add new num clk levels struct for max mclk index. -Fix check for phantom BPP. -Fix rotated cursor offset calculation. Signed-off-by: Aric Cyr <Aric.Cyr@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Fix rotated cursor offset calculationDavid Galiffi
[Why] Underflow is observed when cursor is still enabled when the cursor rectangle is outside the bounds of it's surface viewport. [How] Update parameters used to determine when cursor should be disabled. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: David Galiffi <David.Galiffi@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Revert check for phantom BPPAlvin Lee
[Description] Revert change since enabling SubVP on 8K60 single cable results in corruption Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Use new num clk levels struct for max mclk indexDillon Varone
[WHY?] When calculating watermark and dlg values, the max mclk level index and associated speed are needed to find the correlated dummy latency value. Currently the incorrect index is given due to a clock manager refactor. [HOW?] Use num_memclk_level from num_entries_per_clk struct for getting the correct max mem speed. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Avoid setting pixel rate divider to N/ATaimur Hassan
[Why] Pixel rate divider values should never be set to N/A (0xF) as the K1/K2 field is only 1/2 bits wide. [How] Set valid divider values for virtual and FRL/DP2 cases. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Fix display corruption w/ VSR enableIlya Bakoulin
[Why] Brief corruption is observed on hotplug/unplug with certain display configurations when VSR is enabled. [How] Work around the issue by avoiding 2to1 ODM when stream plane_count is 0. Reviewed-by: Dillon Varone <Dillon.Varone@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Retain phantom plane/stream if validation failsAlvin Lee
[Description] - If we fail validation, we should retain the phantom stream/planes - Full updates assume that phantom pipes will be fully removed, but if validation fails we keep the phantom pipes - Therefore we have to retain the plane/stream if validation fails (since the refcount is decremented before validation, and the expectation is that it's fully freed when the old dc_state is released) Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Add debug options for increasing phantom linesAlvin Lee
[Description] - Add debug option for increasing number of phantom lines Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Phase 1 Add Bw Allocation source and header filesMustapha Ghaddar
[WHY] To implement BW Allocation as per USB4 spec chapter 10.7 [HOW] Implement the DP-Tx portion of the logic to interact with DPIA Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Add YCBCR2020 coefficients to CSC matrixRodrigo Siqueira
When some of the IGT tests are executed in DCN31, it is possible to see multiple occurrences of this warning: WARNING: CPU: 9 PID: 3482 at drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dcn30/dcn30_dpp.c:154 dpp3_program_post_csc+0x196/0x220 [amdgpu] [..] PU: 9 PID: 3482 Comm: amd_hdr Tainted: G W 5.18.0+ #3 IP: 0010:dpp3_program_post_csc+0x196/0x220 [amdgpu] [..] all Trace: <TASK> dpp3_cnv_setup+0x5d9/0x5f0 [amdgpu] ? dcn20_blank_pixel_data+0x30a/0x330 [amdgpu] dcn20_program_pipe+0x259/0xb40 [amdgpu] ? offset_to_id+0x1b0/0x1c0 [amdgpu] dcn20_program_front_end_for_ctx+0x36a/0x450 [amdgpu] commit_planes_for_stream+0x8eb/0x13e0 [amdgpu] This commit fix the above issue by adding YCBCR2020 coefficients to the DPP Color Space Converter (CSC) matrix. Reviewed-by: Nawwar Ali <nawwar.ali@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Use viewport height for subvp mall allocation sizeDillon Varone
[WHY?] MALL allocation size depends on the viewport height, not the addressable vertical lines, which will not match when scaling. [HOW?] Base MALL allocation size calculations off viewport height. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Check if PSR enabled when entering MALLAlvin Lee
[Description] - When attempting to enter MALL SS when a PSR panel is connected, we have to check that the PSR panel has already entered PSR because the vsync interrupt call is per display index (can be called for the non-PSR panel first) - Also don't override link settings when programming phantom stream (main and phantom pipe share the same link) Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Add check for DET fetch latency hiding for dcn32Dillon Varone
[WHY?] Some configurations are constructed with very marginal DET buffers relative to the worst possible time required to fetch a swath. [HOW?] Add a check to see that the DET buffer allocated for each pipe can hide the latency for all pipes to fetch at least one swath. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Use dummy pstate latency for subvp when needed on dcn32Dillon Varone
[WHY?] Prefetch is not budgetting time for dummy pstate when using subvp and low uclk. [HOW?] Override fclk change latency to use dummy pstate latency when calculating prefetch schedule for subvp configs with low uclk. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Update soc bounding box for dcn32/dcn321Dillon Varone
[Description] New values for soc bounding box and dummy pstate. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Add Z8 allow states to z-state support listNicholas Kazlauskas
[Why] Even if we block Z9 based on crossover threshold it's possible to allow for Z8. [How] There's support for this on DCN314, so update the support types to include a z8 only and z8_z10 only state. Update the decide_zstate_support function to allow for specifying these modes based on the Z8 threshold. DCN31 has z-state disabled, but still update the legacy code to map z8_only = disallow and z10_z8_only = z10_only to keep the support the same. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Update Z8 watermarks for DCN314Nicholas Kazlauskas
[Why & How] Update from HW, need to lower watermarks for enter/enter+exit latency. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Limit HW cursor size of >= 4kAlvin Lee
[Description] - For SubVP, we cannot support HW cursor if it's greater than 64 x 64 x 4 bytes in size - However, on certain config changes (i.e. pixel format) we can exit SubVP (then change to HW cursor) then re-enter SubVP without changing back to SW cursor because there is no SetCursorAttributes call - To workaround this issue, limit the HW cursor size to be less than 64 x 64 x 4 bytes whenever the stream is >= 4K - Also ensure this W/A only affects DCN that supports SubVP Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: No display after resume from WB/CBTsung-hua Lin
[why] First MST sideband message returns AUX_RET_ERROR_HPD_DISCON on certain intel platform. Aux transaction considered failure if HPD unexpected pulled low. The actual aux transaction success in such case, hence do not return error. [how] Not returning error when AUX_RET_ERROR_HPD_DISCON detected on the first sideband message. v2: squash in fix (Alex) Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Tsung-hua Lin <Tsung-hua.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Add margin on DRR vblank start for subvpAlvin Lee
[Description] - Add margin for HUBP "jitter" for SubVp + DRR case - Also do a min transition even if MPO is added on a non SubVP pipe (i.e. added on DRR pipe for SubVP + DRR) Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: new ABM config 2Camille Cho
[Why & How] Add configuration 2 for ABM 2.3/2.4 to suit customer preferences, which is to lower the brightness curves in 80%-100% range compared to the existing default config 0. Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Camille Cho <Camille.Cho@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/dc/dce120: Fix audio register mapping, stop triggering KASANLyude Paul
There's been a very long running bug that seems to have been neglected for a while, where amdgpu consistently triggers a KASAN error at start: BUG: KASAN: global-out-of-bounds in read_indirect_azalia_reg+0x1d4/0x2a0 [amdgpu] Read of size 4 at addr ffffffffc2274b28 by task modprobe/1889 After digging through amd's rather creative method for accessing registers, I eventually discovered the problem likely has to do with the fact that on my dce120 GPU there are supposedly 7 sets of audio registers. But we only define a register mapping for 6 sets. So, fix this and fix the KASAN warning finally. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amdgpu: fix pci device refcount leakYang Yingliang
As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). So before returning from amdgpu_device_resume|suspend_display_audio(), pci_dev_put() is called to avoid refcount leak. Fixes: 3f12acc8d6d4 ("drm/amdgpu: put the audio codec into suspend state before gpu reset V3") Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amdgpu/psp: don't free PSP buffers on suspendAlex Deucher
We can reuse the same buffers on resume. v2: squash in S4 fix from Shikai Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2213 Reviewed-by: Christian König <christian.koenig@amd.com> Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-11-23drm/amdgpu/dm/mst: Fix uninitialized var in ↵Lyude Paul
pre_compute_mst_dsc_configs_for_state() Coverity noticed this one, so let's fix it. Fixes: 7cce4cd628be ("drm/amdgpu/mst: Stop ignoring error codes and deadlocking") Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org # v5.6+
2022-11-23drm/amd/amdgpu: reserve vm invalidation engine for firmwareJack Xiao
If mes enabled, reserve VM invalidation engine 5 for firmware. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: fix compilation issue with legacy gccBob zhou
This patch is used to fix following compilation issue with legacy gcc error: ‘for’ loop initial declarations are only allowed in C99 mode for (int i = flag_vlevel; i < context->bw_ctx.dml.soc.num_states; i++) { Signed-off-by: Bob zhou <bobzhou2@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23Revert "drm/fb-helper: Perform damage handling in deferred-I/O helper"Thomas Zimmermann
This reverts commit 5fc586a058babc71c82a038477581b7bfe1c6e2a. Needed to restore the fbdev damage worker. There have been bug reports about locking order [1] and incorrectly takens branches. [2] Restore the damage worker until these problems have been resovled. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://intel-gfx-ci.01.org/tree/drm-tip/fi-kbl-8809g.html # 1 Link: https://lore.kernel.org/dri-devel/20221115115819.23088-6-tzimmermann@suse.de/T/#m06eedc0a468940e4cbbd14ca026733b639bc445a # 2 Link: https://patchwork.freedesktop.org/patch/msgid/20221118133535.9739-4-tzimmermann@suse.de (cherry picked from commit e3ddd2d25533d1cc6f9fea421e4a5f16b60b3434)
2022-11-23Revert "drm/fb-helper: Schedule deferred-I/O worker after writing to ↵Thomas Zimmermann
framebuffer" This reverts commit 7f5cc4a3e5e4c5a38e5748defc952e45278f7a70. Needed to restore the fbdev damage worker. There have been bug reports about locking order [1] and incorrectly takens branches. [2] Restore the damage worker until these problems have been resovled. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://intel-gfx-ci.01.org/tree/drm-tip/fi-kbl-8809g.html # 1 Link: https://lore.kernel.org/dri-devel/20221115115819.23088-6-tzimmermann@suse.de/T/#m06eedc0a468940e4cbbd14ca026733b639bc445a # 2 Link: https://patchwork.freedesktop.org/patch/msgid/20221118133535.9739-3-tzimmermann@suse.de (cherry picked from commit 8b83e1a455382dc667898a525a93f4eb6716cc41)
2022-11-23Revert "drm/fb-helper: Remove damage worker"Thomas Zimmermann
This reverts commit 27c3e9452d552ea86369a94f23287a9675f2d7a1. Needed to restore the fbdev damage worker. There have been bug reports about locking order [1] and incorrectly takens branches. [2] Restore the damage worker until these problems have been resovled. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://intel-gfx-ci.01.org/tree/drm-tip/fi-kbl-8809g.html # 1 Link: https://lore.kernel.org/dri-devel/20221115115819.23088-6-tzimmermann@suse.de/T/#m06eedc0a468940e4cbbd14ca026733b639bc445a # 2 Link: https://patchwork.freedesktop.org/patch/msgid/20221118133535.9739-2-tzimmermann@suse.de (cherry picked from commit 7aa3d63e1ad56c174536a5aba76d8a54c4c5acb4)
2022-11-23fbdev: Make fb_modesetting_disabled() static inlineThomas Zimmermann
Make fb_modesetting_disabled() a static-inline function when it is defined in the header file. Avoid the linker error shown below. ld: drivers/video/fbdev/core/fbmon.o: in function `fb_modesetting_disabled': fbmon.c:(.text+0x1e4): multiple definition of `fb_modesetting_disabled'; drivers/video/fbdev/core/fbmem.o:fbmem.c:(.text+0x1bac): first defined here A bug report is at [1]. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Fixes: 0ba2fa8cbd29 ("fbdev: Add support for the nomodeset kernel parameter") Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Helge Deller <deller@gmx.de> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Link: https://lore.kernel.org/dri-devel/20221117183214.2473e745@canb.auug.org.au/T/#u # 1 Link: https://patchwork.freedesktop.org/patch/msgid/20221117114729.7570-1-tzimmermann@suse.de (cherry picked from commit a189b2ee938f6b15ad9f95bdef63f95a3a092418)
2022-11-23Merge drm/drm-next into drm-misc-next-fixesThomas Zimmermann
Backmerging to update drm-misc-next-fixes for the final phase of the release cycle, again. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2022-11-23drm/msm/hdmi: remove unnecessary NULL checkDan Carpenter
This code was recently refactored in commit and now the "hdmi" pointer can't be NULL. Checking for NULL leads to a Smatch warning: drivers/gpu/drm/msm/hdmi/hdmi.c:141 msm_hdmi_init() warn: variable dereferenced before check 'hdmi' (see line 119) Fixes: 69a88d8633ec ("drm/msm/hdmi: move resource allocation to probe function") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/512163/ Link: https://lore.kernel.org/r/Y3eCqQ2pm1uQnktV@kadam Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-23dt-bindings: msm: dsi-controller-main: Drop redundant phy-namesBryan O'Donoghue
Adding in msm8939 which is based msm8916 dtsi I stumbled across a binding check complaining about the phy name for msm8916 which we were reusing for msm8939. The currently inconsistent upstream dtsi naming of "dsi" and "dsi-phy" is not captured in the yaml for this driver. The driver however doesn't care about the name of DSI phy, hence the yaml check is redundant. Both Krzysztof and Rob suggested we could drop the phy-names entirely if it really isn't a dependency. So, drop the inconsistent and unnecessary phy-names field from the yaml. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-23Merge tag 'drm-intel-next-2022-11-18' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next GVT Changes: - gvt-next stuff mostly with refactor for the new MDEV interface. i915 Changes: - PSR fixes and improvements (Jouni) - DP DSC fixes (Vinod, Jouni) - More general display cleanups (Jani) - More display collor management cleanup targetting degamma (Ville) - remove circ_buf.h includes (Jiri) - wait power off delay at driver remove to optimize probe (Jani) - More audio cleanup targeting the ELD precompute readout (Ville) - Enable DC power states on all eDP ports (Imre) - RPL-P stepping info (Matt Atwood) - MTL enabling patches (RK) - Removal of DG2 force_probe (Matt) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y3f71obyEkImXoUF@intel.com
2022-11-22doc: add documentation for accel subsystemOded Gabbay
Add an introduction section for the accel subsystem. Most of the relevant data is in the DRM documentation, so the introduction only presents the why of the new subsystem, how are the compute accelerators exposed to user-space and what changes need to be done in a standard DRM driver to register it to the new accel subsystem. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Tested-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Melissa Wen <mwen@igalia.com>
2022-11-22drm: initialize accel frameworkOded Gabbay
Now that we have the accel framework code ready, let's call the accel functions from all the appropriate places. These places are the drm module init/exit functions, and all the drm_minor handling functions. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Tested-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Melissa Wen <mwen@igalia.com>
2022-11-22accel: add dedicated minor for accelerator devicesOded Gabbay
The accelerator devices are exposed to user-space using a dedicated major. In addition, they are represented in /dev with new, dedicated device char names: /dev/accel/accel*. This is done to make sure any user-space software that tries to open a graphic card won't open the accelerator device by mistake. The above implies that the minor numbering should be separated from the rest of the DRM devices. However, to avoid code duplication, we want the drm_minor structure to be able to represent the accelerator device. To achieve this, we add a new drm_minor* to drm_device that represents the accelerator device. This pointer is initialized for drivers that declare they handle compute accelerator, using a new driver feature flag called DRIVER_COMPUTE_ACCEL. It is important to note that this driver feature is mutually exclusive with DRIVER_RENDER. Devices that want to expose both graphics and compute device char files should be handled by two drivers that are connected using the auxiliary bus framework. In addition, we define a different IDR to handle the accelerators minors. This is done to make the minor's index be identical to the device index in /dev/. Any access to the IDR is done solely by functions in accel_drv.c, as the IDR is define as static. The DRM core functions call those functions in case they detect the minor's type is DRM_MINOR_ACCEL. We define a separate accel_open function (from drm_open) that the accel drivers should set as their open callback function. Both these functions eventually call the same drm_open_helper(), which had to be changed to be non-static so it can be called from accel_drv.c. accel_open() only partially duplicates drm_open as I removed some code from it that handles legacy devices. To help new drivers, I defined DEFINE_DRM_ACCEL_FOPS macro to easily set the required function operations pointers structure. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Tested-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Melissa Wen <mwen@igalia.com>
2022-11-22drivers/accel: define kconfig and register a new majorOded Gabbay
Add a new Kconfig for the accel subsystem. The Kconfig currently contains only the basic CONFIG_DRM_ACCEL option that will be used to decide whether to compile the accel registration code. Therefore, the kconfig option is defined as bool. The accel code will be compiled as part of drm.ko and will be called directly from the DRM core code. The reason we compile it as part of drm.ko and not as a separate module is because of cyclic dependency between drm.ko and the separate module (if it would have existed). This is due to the fact that DRM core code calls accel functions and vice-versa. The accelerator devices will be exposed to the user space with a new, dedicated major number - 261. The accel init function registers the new major number as a char device and create corresponding sysfs and debugfs root entries, similar to what is done in DRM init function. I added a new header called drm_accel.h to include/drm/, that will hold the prototypes of the drm_accel.c functions. In case CONFIG_DRM_ACCEL is set to 'N', that header will contain empty inline implementations of those functions, to allow DRM core code to compile successfully without dependency on CONFIG_DRM_ACCEL. I Updated the MAINTAINERS file accordingly with the newly added folder and I have taken the liberty to appropriate the dri-devel mailing list and the dri-devel IRC channel for the accel subsystem. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Tested-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Melissa Wen <mwen@igalia.com>
2022-11-22Merge tag 'drm-intel-gt-next-2022-11-18' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Core Changes: - Backmerge of drm-next Driver Changes: - Restore probe_range behaviour for userptr (Matt A) - Fix use-after-free on lmem_userfault_list (Matt A) - Never purge busy TTM objects (Matt A) - Meteorlake enabling (Daniele, Badal, Daniele, Stuart, Aravind, Alan) - Demote GuC kernel contexts to normal priority (John) - Use RC6 residency types as arguments to residency functions (Ashutosh, Rodrigo, Jani) - Convert some legacy DRM debugging macros to new ones (Tvrtko) - Don't deadlock GuC busyness stats vs reset (John) - Remove excessive line feeds in GuC state dumps (John) - Use i915_sg_dma_sizes() for all backends (Matt A) - Prefer REG_FIELD_GET in intel_rps_get_cagf (Ashutosh, Rodrigo) - Use GEN12_RPSTAT register for GT freq (Don, Badal, Ashutosh) - Remove unwanted TTM ghost obj check (Matt A) - Update workaround documentation (Lucas) - Coding style and static checker fixes and cleanups (Jani, Umesh, Tvrtko, Lucas, Andrzej) - Selftest improvements (Chris, Daniele, Riana, Andrzej) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y3dMd9HDpfDehhWm@jlahtine-mobl.ger.corp.intel.com
2022-11-22Merge tag 'amd-drm-next-6.2-2022-11-18' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.2-2022-11-18: amdgpu: - SR-IOV fixes - Clean up DC checks - DCN 3.2.x fixes - DCN 3.1.x fixes - Don't enable degamma on asics which don't support it - IP discovery fixes - BACO fixes - Fix vbios allocation handling when vkms is enabled - Drop buggy tdr advanced mode GPU reset handling - Fix the build when DCN is not set in kconfig - MST DSC fixes - Userptr fixes - FRU and RAS EEPROM fixes - VCN 4.x RAS support - Aldrebaran CU occupancy reporting fix - PSP ring cleanup amdkfd: - Memory limit fix - Enable cooperative launch on gfx 10.3 amd-drm-next-6.2-2022-11-11: amdgpu: - SMU 13.x updates - GPUVM TLB race fix - DCN 3.1.4 updates - DCN 3.2.x updates - PSR fixes - Kerneldoc fix - Vega10 fan fix - GPUVM locking fixes in error pathes - BACO fix for Beige Goby - EEPROM I2C address cleanup - GFXOFF fix - Fix DC memory leak in error pathes - Flexible array updates - Mtype fix for GPUVM PTEs - Move Kconfig into amdgpu directory - SR-IOV updates - Fix possible memory leak in CS IOCTL error path amdkfd: - Fix possible memory overrun - CRIU fixes radeon: - ACPI ref count fix - HDA audio notifier support - Move Kconfig into radeon directory UAPI: - Add new GEM_CREATE flags to help to transition more KFD functionality to the DRM UAPI. These are used internally in the driver to align location based memory coherency requirements from memory allocated in the KFD with how we manage GPUVM PTEs. They are currently blocked in the GEM_CREATE IOCTL as we don't have a user right now. They are just used internally in the kernel driver for now for existing KFD memory allocations. So a change to the UAPI header, but no functional change in the UAPI. From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221118170807.6505-1-alexander.deucher@amd.com Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-11-22Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into ↵Dave Airlie
drm-next please pull the following etnaviv changes for the next merge window. Mostly some small workarounds to get new hardware support going. But also more fixes to the softpin MMU handling and a nice addition from Christian to make the kernel logs on hang detection more useful. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/adcb1b3dec89a18d6c3c4ee6e179b9b2c9f25046.camel@pengutronix.de
2022-11-22drm: rcar-du: Fix Kconfig dependency between DRM and RZG2L_MIPI_DSIBiju Das
When CONFIG_DRM=m and CONFIG_DRM_RZG2L_MIPI_DSI=y, it results in a build failure. This patch fixes the build issue by adding dependency to DRM. Fixes: 7a043f978ed1 ("drm: rcar-du: Add RZ/G2L DSI driver") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2022-11-22Merge tag 'drm-misc-next-2022-11-17' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 6.2: UAPI Changes: Cross-subsystem Changes: - fbdev: Add support for the nomodeset kernel parameter Core Changes: - client: Add kunit tests for drm_connector_pick_cmdline_mode() - dma-buf: Move dma_buf_mmap_internal() to new locking specification - edid: Dump EDID on drm_edid_get_panel_id() failure, Stop using a temporary device to load the EDID through the firmware mechanism - fb-helper: Remove damage worker - gem-vram: Fix deadlock in drm_gem_vram_vmap() - modes: Named mode parsing improvements - tests: Add Kunit helpers to create a DRM device Driver Changes: - hisilicon: convert to drm_mode_init() - malidp: Use drm-managed resources - msm: convert to drm_mode_init() and drm_mode_copy() - mtk: convert to drm_mode_init() - nouveau: Support backlight control for nva3 - rockchip: convert to drm_mode_copy() - sti: convert to drm_mode_copy() - v3d: Switch to drm-managed resources - vc4: Fix potential NULL pointer dereference - panels: - New panel: NewVision NV3051D Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221117083628.mzij5nrbdzokek7c@houat
2022-11-21Merge drm/drm-next into drm-misc-next-fixesThomas Zimmermann
Backmerging to update drm-misc-next-fixes for the final phase of the release cycle. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
generated by cgit (git 2.34.1) at 2025-09-12 00:19:59 +0000