summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-10-27block: prefetch request to be initializedJens Axboe
Now we have the tags available in __blk_mq_alloc_requests_batch(), we can start fetching the first request cacheline before calling into the request initialization. Signed-off-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/20211019153300.623322-4-axboe@kernel.dk Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27block: pass in blk_mq_tags to blk_mq_rq_ctx_init()Jens Axboe
Instead of getting this from data for every invocation of request initialization, pass it in as an argument instead. Signed-off-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/20211019153300.623322-3-axboe@kernel.dk Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27block: add rq_flags to struct blk_mq_alloc_dataJens Axboe
There's a hole here we can use, and it's faster to set this earlier rather than need to check q->elevator multiple times. Signed-off-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/20211019153300.623322-2-axboe@kernel.dk Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27nios2: Make NIOS2_DTB_SOURCE_BOOL depend on !COMPILE_TESTGuenter Roeck
nios2:allmodconfig builds fail with make[1]: *** No rule to make target 'arch/nios2/boot/dts/""', needed by 'arch/nios2/boot/dts/built-in.a'. Stop. make: [Makefile:1868: arch/nios2/boot/dts] Error 2 (ignored) This is seen with compile tests since those enable NIOS2_DTB_SOURCE_BOOL, which in turn enables NIOS2_DTB_SOURCE. This causes the build error because the default value for NIOS2_DTB_SOURCE is an empty string. Disable NIOS2_DTB_SOURCE_BOOL for compile tests to avoid the error. Fixes: 2fc8483fdcde ("nios2: Build infrastructure") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-10-27Merge branch 'hns3-fixes'David S. Miller
Guangbin Huang says: ==================== net: hns3: add some fixes for -net This series adds some fixes for the HNS3 ethernet driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27net: hns3: adjust string spaces of some parameters of tx bd info in debugfsGuangbin Huang
This patch adjusts the string spaces of some parameters of tx bd info in debugfs according to their maximum needs. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27net: hns3: expand buffer len for some debugfs commandGuangbin Huang
The specified buffer length for three debugfs files fd_tcam, uc and tqp is not enough for their maximum needs, so this patch fixes them. Fixes: b5a0b70d77b9 ("net: hns3: refactor dump fd tcam of debugfs") Fixes: 1556ea9120ff ("net: hns3: refactor dump mac list of debugfs") Fixes: d96b0e59468d ("net: hns3: refactor dump reg of debugfs") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27net: hns3: add more string spaces for dumping packets number of queue info ↵Jie Wang
in debugfs As the width of packets number registers is 32 bits, they needs at most 10 characters for decimal data printing, but now the string spaces is not enough, so this patch fixes it. Fixes: e44c495d95e ("net: hns3: refactor queue info of debugfs") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27net: hns3: fix data endian problem of some functions of debugfsJie Wang
The member data in struct hclge_desc is type of __le32, it needs endian conversion before using it, and some functions of debugfs didn't do that, so this patch fixes it. Fixes: c0ebebb9ccc1 ("net: hns3: Add "dcb register" status information query function") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27net: hns3: ignore reset event before initialization process is doneGuangbin Huang
Currently, if there is a reset event triggered by RAS during device in initialization process, driver may run reset process concurrently with initialization process. In this case, it may cause problem. For example, the RSS indirection table may has not been alloc memory in initialization process yet, but it is used in reset process, it will cause a call trace like this: [61228.744836] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... [61228.897677] Workqueue: hclgevf hclgevf_service_task [hclgevf] [61228.911390] pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--) [61228.918670] pc : hclgevf_set_rss_indir_table+0xb4/0x190 [hclgevf] [61228.927812] lr : hclgevf_set_rss_indir_table+0x90/0x190 [hclgevf] [61228.937248] sp : ffff8000162ebb50 [61228.941087] x29: ffff8000162ebb50 x28: ffffb77add72dbc0 x27: ffff0820c7dc8080 [61228.949516] x26: 0000000000000000 x25: ffff0820ad4fc880 x24: ffff0820c7dc8080 [61228.958220] x23: ffff0820c7dc8090 x22: 00000000ffffffff x21: 0000000000000040 [61228.966360] x20: ffffb77add72b9c0 x19: 0000000000000000 x18: 0000000000000030 [61228.974646] x17: 0000000000000000 x16: ffffb77ae713feb0 x15: ffff0820ad4fcce8 [61228.982808] x14: ffffffffffffffff x13: ffff8000962eb7f7 x12: 00003834ec70c960 [61228.991990] x11: 00e0fafa8c206982 x10: 9670facc78a8f9a8 x9 : ffffb77add717530 [61229.001123] x8 : ffff0820ad4fd6b8 x7 : 0000000000000000 x6 : 0000000000000011 [61229.010249] x5 : 00000000000cb1b0 x4 : 0000000000002adb x3 : 0000000000000049 [61229.018662] x2 : ffff8000162ebbb8 x1 : 0000000000000000 x0 : 0000000000000480 [61229.027002] Call trace: [61229.030177] hclgevf_set_rss_indir_table+0xb4/0x190 [hclgevf] [61229.039009] hclgevf_rss_init_hw+0x128/0x1b4 [hclgevf] [61229.046809] hclgevf_reset_rebuild+0x17c/0x69c [hclgevf] [61229.053862] hclgevf_reset_service_task+0x4cc/0xa80 [hclgevf] [61229.061306] hclgevf_service_task+0x6c/0x630 [hclgevf] [61229.068491] process_one_work+0x1dc/0x48c [61229.074121] worker_thread+0x15c/0x464 [61229.078562] kthread+0x168/0x16c [61229.082873] ret_from_fork+0x10/0x18 [61229.088221] Code: 7900e7f6 f904a683 d503201f 9101a3e2 (38616b43) [61229.095357] ---[ end trace 153661a538f6768c ]--- To fix this problem, don't schedule reset task before initialization process is done. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27net: hns3: change hclge/hclgevf workqueue to WQ_UNBOUND modeYufeng Mo
Currently, the workqueue of hclge/hclgevf is executed on the CPU that initiates scheduling requests by default. In stress scenarios, the CPU may be busy and workqueue scheduling is completed after a long period of time. To avoid this situation and implement proper scheduling, use the WQ_UNBOUND mode instead. In this way, the workqueue can be performed on a relatively idle CPU. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27net: hns3: fix pause config problem after autoneg disabledGuangbin Huang
If a TP port is configured by follow steps: 1.ethtool -s ethx autoneg off speed 100 duplex full 2.ethtool -A ethx rx on tx on 3.ethtool -s ethx autoneg on(rx&tx negotiated pause results are off) 4.ethtool -s ethx autoneg off speed 100 duplex full In step 3, driver will set rx&tx pause parameters of hardware to off as pause parameters negotiated with link partner are off. After step 4, the "ethtool -a ethx" command shows both rx and tx pause parameters are on. However, pause parameters of hardware are still off and port has no flow control function actually. To fix this problem, if autoneg is disabled, driver uses its saved parameters to restore pause of hardware. If the speed is not changed in this case, there is no link state changed for phy, it will cause the pause parameter is not taken effect, so we need to force phy to go down and up. Fixes: aacbe27e82f0 ("net: hns3: modify how pause options is displayed") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27block: Fix partition check for host-aware zoned block devicesShin'ichiro Kawasaki
Commit a33df75c6328 ("block: use an xarray for disk->part_tbl") modified the method to check partition existence in host-aware zoned block devices from disk_has_partitions() helper function call to empty check of xarray disk->part_tbl. However, disk->part_tbl always has single entry for disk->part0 and never becomes empty. This resulted in the host-aware zoned devices always judged to have partitions, and it made the sysfs queue/zoned attribute to be "none" instead of "host-aware" regardless of partition existence in the devices. This also caused DEBUG_LOCKS_WARN_ON(lock->magic != lock) for sdkp->rev_mutex in scsi layer when the kernel detects host-aware zoned device. Since block layer handled the host-aware zoned devices as non- zoned devices, scsi layer did not have chance to initialize the mutex for zone revalidation. Therefore, the warning was triggered. To fix the issues, call the helper function disk_has_partitions() in place of disk->part_tbl empty check. Since the function was removed with the commit a33df75c6328, reimplement it to walk through entries in the xarray disk->part_tbl. Fixes: a33df75c6328 ("block: use an xarray for disk->part_tbl") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Cc: stable@vger.kernel.org # v5.14+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211026060115.753746-1-shinichiro.kawasaki@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27block: add async version of bio_set_polledPavel Begunkov
If we know that a iocb is async we can optimise bio_set_polled() a bit, add a new helper bio_set_polled_async(). Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/8fa137885164a5d05fadcff4c3521da8d5a83d00.1635337135.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27block: kill DIO_MULTI_BIOPavel Begunkov
Now __blkdev_direct_IO() serves only multi-bio I/O, thus remove not used anymore single bio refcounting optimisations. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/88eb488aae9ed4852a30f3a7132f296f56e43b80.1635337135.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27block: kill unused polling bits in __blkdev_direct_IO()Pavel Begunkov
With addition of __blkdev_direct_IO_async(), __blkdev_direct_IO() now serves only multio-bio I/O, which we don't poll. Now we can remove anything related to I/O polling from it. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/b8c597a6b7ee612df394853bfd24726aee5b898e.1635337135.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27block: avoid extra iter advance with async iocbPavel Begunkov
Nobody cares about iov iterators state if we return -EIOCBQUEUED, so as the we now have __blkdev_direct_IO_async(), which gets pages only once, we can skip expensive iov_iter_advance(). It's around 1-2% of all CPU spent. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/a6158edfbfa2ae3bc24aed29a72f035df18fad2f.1635337135.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27Revert "btrfs: compression: drop kmap/kunmap from generic helpers"David Sterba
This reverts commit 4c2bf276b56d8d27ddbafcdf056ef3fc60ae50b0. The kmaps in compression code are still needed and cause crashes on 32bit machines (ARM, x86). Reproducible eg. by running fstest btrfs/004 with enabled LZO or ZSTD compression. Link: https://lore.kernel.org/all/CAJCQCtT+OuemovPO7GZk8Y8=qtOObr0XTDp8jh4OHD6y84AFxw@mail.gmail.com/ Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214839 Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-27nvmet-tcp: fix header digest verificationAmit Engel
Pass the correct length to nvmet_tcp_verify_hdgst, which is the pdu header length. This fixes a wrong behaviour where header digest verification passes although the digest is wrong. Signed-off-by: Amit Engel <amit.engel@dell.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-27nvmet: use flex_array_size and struct_sizeLen Baker
In an effort to avoid open-coded arithmetic in the kernel [1], use the flex_array_size() and struct_size() helpers instead of an open-coded calculation. [1] https://github.com/KSPP/linux/issues/160 Signed-off-by: Len Baker <len.baker@gmx.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-27nvmet: register discovery subsystem as 'current'Hannes Reinecke
Register the discovery subsystem as the 'current' discovery subsystem, and add a new discovery log page entry for it. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-27nvmet: switch check for subsystem typeHannes Reinecke
Invert the check for discovery subsystem type to allow for additional discovery subsystem types. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-27nvme: add new discovery log page entry definitionsHannes Reinecke
TP8014 adds a new SUBTYPE value and a new field EFLAGS for the discovery log page entry. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-27nvmet-tcp: fix data digest pointer calculationVarun Prakash
exp_ddgst is of type __le32, &cmd->exp_ddgst + cmd->offset increases &cmd->exp_ddgst by 4 * cmd->offset, fix this by type casting &cmd->exp_ddgst to u8 *. Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver") Signed-off-by: Varun Prakash <varun@chelsio.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-27nvme-tcp: fix data digest pointer calculationVarun Prakash
ddgst is of type __le32, &req->ddgst + req->offset increases &req->ddgst by 4 * req->offset, fix this by type casting &req->ddgst to u8 *. Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver") Signed-off-by: Varun Prakash <varun@chelsio.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-27nvme-tcp: fix possible req->offset corruptionVarun Prakash
With commit db5ad6b7f8cd ("nvme-tcp: try to send request in queue_rq context") r2t and response PDU can get processed while send function is executing. Current data digest send code uses req->offset after kernel_sendmsg(), this creates a race condition where req->offset gets reset before it is used in send function. This can happen in two cases - 1. Target sends r2t PDU which resets req->offset. 2. Target send response PDU which completes the req and then req is used for a new command, nvme_tcp_setup_cmd_pdu() resets req->offset. Fix this by storing req->offset in a local variable and using this local variable after kernel_sendmsg(). Fixes: db5ad6b7f8cd ("nvme-tcp: try to send request in queue_rq context") Signed-off-by: Varun Prakash <varun@chelsio.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-26doc: Fix typo in request queue sysfs documentationDamien Le Moal
Fix a typo (are -> as) in the introduction paragraph of Documentation/block/queue-sysfs.rst. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-6-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-26doc: document sysfs queue/independent_access_ranges attributesDamien Le Moal
Update the file Documentation/block/queue-sysfs.rst to add a description of a device queue sysfs entries related to independent access ranges (e.g. concurrent positioning ranges for multi-actuator hard-disks). Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-5-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-26libata: support concurrent positioning ranges logDamien Le Moal
Add support to discover if an ATA device supports the Concurrent Positioning Ranges data log (address 0x47), indicating that the device is capable of seeking to multiple different locations in parallel using multiple actuators serving different LBA ranges. Also add support to translate the concurrent positioning ranges log into its equivalent Concurrent Positioning Ranges VPD page B9h in libata-scsi.c. The format of the Concurrent Positioning Ranges Log is defined in ACS-5 r9. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-4-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-26scsi: sd: add concurrent positioning ranges supportDamien Le Moal
Add the sd_read_cpr() function to the sd scsi disk driver to discover if a device has multiple concurrent positioning ranges (i.e. multiple actuators on an HDD). The existence of VPD page B9h indicates if a device has multiple concurrent positioning ranges. The page content describes each range supported by the device. sd_read_cpr() is called from sd_revalidate_disk() and uses the block layer functions disk_alloc_independent_access_ranges() and disk_set_independent_access_ranges() to represent the set of actuators of the device as independent access ranges. The format of the Concurrent Positioning Ranges VPD page B9h is defined in section 6.6.6 of SBC-5. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-3-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-26block: Add independent access ranges supportDamien Le Moal
The Concurrent Positioning Ranges VPD page (for SCSI) and data log page (for ATA) contain parameters describing the set of contiguous LBAs that can be served independently by a single LUN multi-actuator hard-disk. Similarly, a logically defined block device composed of multiple disks can in some cases execute requests directed at different sector ranges in parallel. A dm-linear device aggregating 2 block devices together is an example. This patch implements support for exposing a block device independent access ranges to the user through sysfs to allow optimizing device accesses to increase performance. To describe the set of independent sector ranges of a device (actuators of a multi-actuator HDDs or table entries of a dm-linear device), The type struct blk_independent_access_ranges is introduced. This structure describes the sector ranges using an array of struct blk_independent_access_range structures. This range structure defines the start sector and number of sectors of the access range. The ranges in the array cannot overlap and must contain all sectors within the device capacity. The function disk_set_independent_access_ranges() allows a device driver to signal to the block layer that a device has multiple independent access ranges. In this case, a struct blk_independent_access_ranges is attached to the device request queue by the function disk_set_independent_access_ranges(). The function disk_alloc_independent_access_ranges() is provided for drivers to allocate this structure. struct blk_independent_access_ranges contains kobjects (struct kobject) to expose to the user through sysfs the set of independent access ranges supported by a device. When the device is initialized, sysfs registration of the ranges information is done from blk_register_queue() using the block layer internal function disk_register_independent_access_ranges(). If a driver calls disk_set_independent_access_ranges() for a registered queue, e.g. when a device is revalidated, disk_set_independent_access_ranges() will execute disk_register_independent_access_ranges() to update the sysfs attribute files. The sysfs file structure created starts from the independent_access_ranges sub-directory and contains the start sector and number of sectors of each range, with the information for each range grouped in numbered sub-directories. E.g. for a dual actuator HDD, the user sees: $ tree /sys/block/sdk/queue/independent_access_ranges/ /sys/block/sdk/queue/independent_access_ranges/ |-- 0 | |-- nr_sectors | `-- sector `-- 1 |-- nr_sectors `-- sector For a regular device with a single access range, the independent_access_ranges sysfs directory does not exist. Device revalidation may lead to changes to this structure and to the attribute values. When manipulated, the queue sysfs_lock and sysfs_dir_lock mutexes are held for atomicity, similarly to how the blk-mq and elevator sysfs queue sub-directories are protected. The code related to the management of independent access ranges is added in the new file block/blk-ia-ranges.c. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-2-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27Merge tag 'amd-drm-fixes-5.15-2021-10-21' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.15-2021-10-21: amdgpu: - Fix a potential out of bounds write in debugfs - Fix revision handling for Yellow Carp - Display fixes for Yellow Carp Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211021203430.4578-1-alexander.deucher@amd.com
2021-10-26firmware/psci: fix application of sizeof to pointerjing yangyang
sizeof when applied to a pointer typed expression gives the size of the pointer. ./drivers/firmware/psci/psci_checker.c:158:41-47: ERROR application of sizeof to pointer This issue was detected with the help of Coccinelle. Fixes: 7401056de5f8 ("drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests") Cc: stable@vger.kernel.org Reported-by: Zeal Robot <zealci@zte.com.cn> Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: jing yangyang <jing.yangyang@zte.com.cn> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-10-26Merge tag 'arm-soc-fixes-5.15-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "One last set of small fixes for the soc tree: - Incorrect ethernet phy settings found on i.mx and allwinner platforms - a revert for a Qualcomm DT change that caused a boot regression - four patches for incorrect settings in i.MX DT files - new MAINTAINER file entries for dhcom boards - a Kconfig fix for a reset driver that became unselectable - three more code changes for bugs in reset drivers" * tag 'arm-soc-fixes-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: MAINTAINERS: Add maintainers for DHCOM i.MX6 and DHCOM/DHCOR STM32MP1 Revert "arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target" arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHY arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequency arm64: dts: imx8mm-kontron: Fix polarity of reg_rst_eth2 arm64: dts: imx8mm-kontron: Set lower limit of VDD_SNVS to 800 mV arm64: dts: imx8mm-kontron: Make sure SOC and DRAM supply voltages are correct reset: socfpga: add empty driver allowing consumers to probe reset: tegra-bpmp: Handle errors in BPMP response reset: pistachio: Re-enable driver selection reset: brcmstb-rescal: fix incorrect polarity of status bit ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode arm64: dts: allwinner: h5: NanoPI Neo 2: Fix ethernet node
2021-10-26block: schedule queue restart after BLK_STS_ZONE_RESOURCENaohiro Aota
When dispatching a zone append write request to a SCSI zoned block device, if the target zone of the request is already locked, the device driver will return BLK_STS_ZONE_RESOURCE and the request will be pushed back to the hctx dipatch queue. The queue will be marked as RESTART in dd_finish_request() and restarted in __blk_mq_free_request(). However, this restart applies to the hctx of the completed request. If the requeued request is on a different hctx, dispatch will no be retried until another request is submitted or the next periodic queue run triggers, leading to up to 30 seconds latency for the requeued request. Fix this problem by scheduling a queue restart similarly to the BLK_STS_RESOURCE case or when we cannot get the budget. Also, consolidate the checks into the "need_resource" variable to simplify the condition. Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Link: https://lore.kernel.org/r/20211026165127.4151055-1-naohiro.aota@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-26io_uring: don't assign write hint in the read pathJens Axboe
Move this out of the generic read/write prep path, and place it in the write specific kiocb setup instead. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-26Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski
Daniel Borkmann says: ==================== pull-request: bpf 2021-10-26 We've added 12 non-merge commits during the last 7 day(s) which contain a total of 23 files changed, 118 insertions(+), 98 deletions(-). The main changes are: 1) Fix potential race window in BPF tail call compatibility check, from Toke Høiland-Jørgensen. 2) Fix memory leak in cgroup fs due to missing cgroup_bpf_offline(), from Quanyang Wang. 3) Fix file descriptor reference counting in generic_map_update_batch(), from Xu Kuohai. 4) Fix bpf_jit_limit knob to the max supported limit by the arch's JIT, from Lorenz Bauer. 5) Fix BPF sockmap ->poll callbacks for UDP and AF_UNIX sockets, from Cong Wang and Yucong Sun. 6) Fix BPF sockmap concurrency issue in TCP on non-blocking sendmsg calls, from Liu Jian. 7) Fix build failure of INODE_STORAGE and TASK_STORAGE maps on !CONFIG_NET, from Tejun Heo. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Fix potential race in tail call compatibility check bpf: Move BPF_MAP_TYPE for INODE_STORAGE and TASK_STORAGE outside of CONFIG_NET selftests/bpf: Use recv_timeout() instead of retries net: Implement ->sock_is_readable() for UDP and AF_UNIX skmsg: Extract and reuse sk_msg_is_readable() net: Rename ->stream_memory_read to ->sock_is_readable tcp_bpf: Fix one concurrency problem in the tcp_bpf_send_verdict function cgroup: Fix memory leak caused by missing cgroup_bpf_offline bpf: Fix error usage of map_fd and fdget() in generic_map_update_batch() bpf: Prevent increasing bpf_jit_limit above max bpf: Define bpf_jit_alloc_exec_limit for arm64 JIT bpf: Define bpf_jit_alloc_exec_limit for riscv JIT ==================== Link: https://lore.kernel.org/r/20211026201920.11296-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-26bpf: Fix potential race in tail call compatibility checkToke Høiland-Jørgensen
Lorenzo noticed that the code testing for program type compatibility of tail call maps is potentially racy in that two threads could encounter a map with an unset type simultaneously and both return true even though they are inserting incompatible programs. The race window is quite small, but artificially enlarging it by adding a usleep_range() inside the check in bpf_prog_array_compatible() makes it trivial to trigger from userspace with a program that does, essentially: map_fd = bpf_create_map(BPF_MAP_TYPE_PROG_ARRAY, 4, 4, 2, 0); pid = fork(); if (pid) { key = 0; value = xdp_fd; } else { key = 1; value = tc_fd; } err = bpf_map_update_elem(map_fd, &key, &value, 0); While the race window is small, it has potentially serious ramifications in that triggering it would allow a BPF program to tail call to a program of a different type. So let's get rid of it by protecting the update with a spinlock. The commit in the Fixes tag is the last commit that touches the code in question. v2: - Use a spinlock instead of an atomic variable and cmpxchg() (Alexei) v3: - Put lock and the members it protects into an embedded 'owner' struct (Daniel) Fixes: 3324b584b6f6 ("ebpf: misc core cleanup") Reported-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211026110019.363464-1-toke@redhat.com
2021-10-26bpf: Move BPF_MAP_TYPE for INODE_STORAGE and TASK_STORAGE outside of CONFIG_NETTejun Heo
bpf_types.h has BPF_MAP_TYPE_INODE_STORAGE and BPF_MAP_TYPE_TASK_STORAGE declared inside #ifdef CONFIG_NET although they are built regardless of CONFIG_NET. So, when CONFIG_BPF_SYSCALL && !CONFIG_NET, they are built without the declarations leading to spurious build failures and not registered to bpf_map_types making them unavailable. Fix it by moving the BPF_MAP_TYPE for the two map types outside of CONFIG_NET. Reported-by: kernel test robot <lkp@intel.com> Fixes: a10787e6d58c ("bpf: Enable task local storage for tracing programs") Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/YXG1cuuSJDqHQfRY@slm.duckdns.org
2021-10-26Merge branch 'sock_map: fix ->poll() and update selftests'Alexei Starovoitov
Cong Wang says: ==================== This patchset fixes ->poll() for sockets in sockmap and updates selftests accordingly with select(). Please check each patch for more details. Fixes: c50524ec4e3a ("Merge branch 'sockmap: add sockmap support for unix datagram socket'") Fixes: 89d69c5d0fbc ("Merge branch 'sockmap: introduce BPF_SK_SKB_VERDICT and support UDP'") Acked-by: John Fastabend <john.fastabend@gmail.com> --- v4: add a comment in udp_poll() v3: drop sk_psock_get_checked() reuse tcp_bpf_sock_is_readable() v2: rename and reuse ->stream_memory_read() fix a compile error in sk_psock_get_checked() Cong Wang (3): net: rename ->stream_memory_read to ->sock_is_readable skmsg: extract and reuse sk_msg_is_readable() net: implement ->sock_is_readable() for UDP and AF_UNIX ==================== Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-10-26selftests/bpf: Use recv_timeout() instead of retriesYucong Sun
We use non-blocking sockets in those tests, retrying for EAGAIN is ugly because there is no upper bound for the packet arrival time, at least in theory. After we fix poll() on sockmap sockets, now we can switch to select()+recv(). Signed-off-by: Yucong Sun <sunyucong@gmail.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211008203306.37525-5-xiyou.wangcong@gmail.com
2021-10-26net: Implement ->sock_is_readable() for UDP and AF_UNIXCong Wang
Yucong noticed we can't poll() sockets in sockmap even when they are the destination sockets of redirections. This is because we never poll any psock queues in ->poll(), except for TCP. With ->sock_is_readable() now we can overwrite >sock_is_readable(), invoke and implement it for both UDP and AF_UNIX sockets. Reported-by: Yucong Sun <sunyucong@gmail.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211008203306.37525-4-xiyou.wangcong@gmail.com
2021-10-26skmsg: Extract and reuse sk_msg_is_readable()Cong Wang
tcp_bpf_sock_is_readable() is pretty much generic, we can extract it and reuse it for non-TCP sockets. Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211008203306.37525-3-xiyou.wangcong@gmail.com
2021-10-26net: Rename ->stream_memory_read to ->sock_is_readableCong Wang
The proto ops ->stream_memory_read() is currently only used by TCP to check whether psock queue is empty or not. We need to rename it before reusing it for non-TCP protocols, and adjust the exsiting users accordingly. Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211008203306.37525-2-xiyou.wangcong@gmail.com
2021-10-26tcp_bpf: Fix one concurrency problem in the tcp_bpf_send_verdict functionLiu Jian
With two Msgs, msgA and msgB and a user doing nonblocking sendmsg calls (or multiple cores) on a single socket 'sk' we could get the following flow. msgA, sk msgB, sk ----------- --------------- tcp_bpf_sendmsg() lock(sk) psock = sk->psock tcp_bpf_sendmsg() lock(sk) ... blocking tcp_bpf_send_verdict if (psock->eval == NONE) psock->eval = sk_psock_msg_verdict .. < handle SK_REDIRECT case > release_sock(sk) < lock dropped so grab here > ret = tcp_bpf_sendmsg_redir psock = sk->psock tcp_bpf_send_verdict lock_sock(sk) ... blocking on B if (psock->eval == NONE) <- boom. psock->eval will have msgA state The problem here is we dropped the lock on msgA and grabbed it with msgB. Now we have old state in psock and importantly psock->eval has not been cleared. So msgB will run whatever action was done on A and the verdict program may never see it. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20211012052019.184398-1-liujian56@huawei.com
2021-10-26x86: Fix __get_wchan() for !STACKTRACEPeter Zijlstra
Use asm/unwind.h to implement wchan, since we cannot always rely on STACKTRACE=y. Fixes: bc9bbb81730e ("x86: Fix get_wchan() to support the ORC unwinder") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lkml.kernel.org/r/20211022152104.137058575@infradead.org
2021-10-26drm: panel-orientation-quirks: Add quirk for GPD Win3Mario
Fixes screen orientation for GPD Win 3 handheld gaming console. Signed-off-by: Mario Risoldi <awxkrnl@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211026112737.9181-1-awxkrnl@gmail.com
2021-10-26watchdog: Fix OMAP watchdog early handlingWalter Stoll
TI's implementation does not service the watchdog even if the kernel command line parameter omap_wdt.early_enable is set to 1. This patch fixes the issue. Signed-off-by: Walter Stoll <walter.stoll@duagon.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/88a8fe5229cd68fa0f1fd22f5d66666c1b7057a0.camel@duagon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-10-26watchdog: ixp4xx_wdt: Fix address space warningGuenter Roeck
sparse reports the following address space warning. drivers/watchdog/ixp4xx_wdt.c:122:20: sparse: incorrect type in assignment (different address spaces) drivers/watchdog/ixp4xx_wdt.c:122:20: sparse: expected void [noderef] __iomem *base drivers/watchdog/ixp4xx_wdt.c:122:20: sparse: got void *platform_data Add a typecast to solve the problem. Fixes: 21a0a29d16c6 ("watchdog: ixp4xx: Rewrite driver to use core") Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210911042925.556889-1-linux@roeck-us.net Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-10-26watchdog: sbsa: drop unneeded MODULE_ALIASKrzysztof Kozlowski
The MODULE_DEVICE_TABLE already creates proper alias for platform driver. Having another MODULE_ALIAS causes the alias to be duplicated. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210917092024.19323-1-krzysztof.kozlowski@canonical.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
generated by cgit (git 2.34.1) at 2025-09-16 00:30:32 +0000