summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-11-16udmabuf: set read/write flag when exportingGerd Hoffmann
Otherwise, mmap fails when done with PROT_WRITE. Suggested-by: Gurchetan Singh <gurchetansingh@chromium.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org> Tested-by: Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20181114122029.16766-1-kraxel@redhat.com
2018-11-16Merge tag 'iwlwifi-for-kalle-2018-11-15' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next First batch of iwlwifi fixes for 4.20 * New FW debugging infrastructure; * Some more work on 802.11ax; * Improve support for multiple RF modules with 22000 devices; * Remove an unused FW parameter; * Other debugging improvements;
2018-11-15drivers/net/ethernet/qlogic/qed/qed_rdma.h: fix typoAndrew Morton
Add missing semicolon. Fixes: 291d57f67d244973 ("qed: Fix rdma_info structure allocation") Cc: Michal Kalderon <michal.kalderon@cavium.com> Cc: Denis Bolotin <denis.bolotin@cavium.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15spi: omap2-mcspi: Add missing suspend and resume callsTony Lindgren
I've been wondering still about omap2-mcspi related suspend and resume flakeyness and looks like we're missing calls to spi_master_suspend() and spi_master_resume(). Adding those and using pm_runtime_force_suspend() and pm_runtime_force_resume() makes things work for suspend and resume and allows us to stop using noirq suspend and resume. And while at it, let's use SET_SYSTEM_SLEEP_PM_OPS to simplify things further. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-15Merge branch 'mlx4-fixes'David S. Miller
Tariq Toukan says: ==================== mlx4 fixes for 4.20-rc This patchset includes small fixes for mlx4_core driver. First patch by Jack zeros a field in a FW communication command, to match the FW spec. Please queue it to -stable >= v3.17. In the second patch I zero-initialize a variable to silence a compliation warning. Please queue it to -stable >= v3.19. Third patch by Aya replaces int fields with unsigned int, to fix a UBSAN warning. Please queue it to -stable >= v3.13. Series generated against net commit: db8ddde766ad Merge branch 'qed-Miscellaneous-bug-fixes' ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15net/mlx4: Fix UBSAN warning of signed integer overflowAya Levin
UBSAN: Undefined behavior in drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:626:29 signed integer overflow: 1802201963 + 1802201963 cannot be represented in type 'int' The union of res_reserved and res_port_rsvd[MLX4_MAX_PORTS] monitors granting of reserved resources. The grant operation is calculated and protected, thus both members of the union cannot be negative. Changed type of res_reserved and of res_port_rsvd[MLX4_MAX_PORTS] from signed int to unsigned int, allowing large value. Fixes: 5a0d0a6161ae ("mlx4: Structures and init/teardown for VF resource quotas") Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15net/mlx4_core: Fix uninitialized variable compilation warningTariq Toukan
Initialize the uid variable to zero to avoid the compilation warning. Fixes: 7a89399ffad7 ("net/mlx4: Add mlx4_bitmap zone allocator") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15net/mlx4_core: Zero out lkey field in SW2HW_MPT fw commandJack Morgenstein
When re-registering a user mr, the mpt information for the existing mr when running SRIOV is obtained via the QUERY_MPT fw command. The returned information includes the mpt's lkey. This retrieved mpt information is used to move the mpt back to hardware ownership in the rereg flow (via the SW2HW_MPT fw command when running SRIOV). The fw API spec states that for SW2HW_MPT, the lkey field must be zero. Any ConnectX-3 PF driver which checks for strict spec adherence will return failure for SW2HW_MPT if the lkey field is not zero (although the fw in practice ignores this field for SW2HW_MPT). Thus, in order to conform to the fw API spec, set the lkey field to zero before invoking SW2HW_MPT when running SRIOV. Fixes: e630664c8383 ("mlx4_core: Add helper functions to support MR re-registration") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15MIPS: Loongson3,SGI-IP27: Simplify max_low_pfn calculationPaul Burton
Both the Loongson3 & SGI-IP27 platforms set max_low_pfn to the last available PFN describing memory. They both do it in paging_init() which is later than ideal since max_low_pfn is used before that function is called. Simplify both platforms to trivially initialize max_low_pfn using the end address of DRAM, and do it earlier in prom_meminit(). Signed-off-by: Paul Burton <paul.burton@mips.com> Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Patchwork: https://patchwork.linux-mips.org/patch/21104/ References: https://patchwork.linux-mips.org/patch/21031/ Cc: Huacai Chen <chenhc@lemote.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de> Cc: linux-mips@linux-mips.org
2018-11-16Merge tag 'drm-intel-fixes-2018-11-15' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix Bugzilla #108712: Fix incorrect EU count report from kernel - Fix to account for scale factor when calculating initial phase on scaled output - Avoid too trigger-happy HPD storm detection and fix a race and an OOPS for MST systems. - Relocation race fix for Gen4/5 - A couple ICL fixes and dependencies for above Fixes:. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181115164709.GA13430@jlahtine-desk.ger.corp.intel.com
2018-11-15drm/amd/display: Support amdgpu "max bpc" connector property (v2)Nicholas Kazlauskas
[Why] Many panels support more than 8bpc but some modes are unavailable while running at greater than 8bpc due to DP/HDMI bandwidth constraints. Support for more than 8bpc was added recently in the driver but it defaults to the maximum supported bpc - locking out these modes. This should be a user configurable option such that the user can select what bpc configuration they would like. [How] This patch adds support for getting and setting the amdgpu driver specific "max bpc" property on the connector. It also adds support for limiting the output bpc based on the property value. The default limitation is the lowest value in the range, 8bpc. This was the old value before the range was uncapped. This patch should be updated/replaced later once common drm support for max bpc lands. Bugzilla: https://bugs.freedesktop.org/108542 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201585 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200645 Fixes: e03fd3f300f6 ("drm/amd/display: Do not limit color depth to 8bpc") v2: rebase on upstream (Alex) Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-15drm/amdgpu: Add amdgpu "max bpc" connector property (v2)Nicholas Kazlauskas
[Why] Many panels support more than 8bpc but some modes are unavailable while running at greater than 8bpc due to DP/HDMI bandwidth constraints. Support for more than 8bpc was added recently in the driver but it defaults to the maximum supported bpc - locking out these modes. This should be a user configurable option such that the user can select what bpc configuration they would like. [How] This patch introduces the "max bpc" amdgpu driver specific connector property so the user can limit the maximum bpc. It ranges from 8 to 16. This doesn't directly set the preferred bpc for the panel since it follows Intel's existing driver conventions. This proprety should be removed once common drm support for max bpc lands. v2: rebase on upstream (Alex) Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-15iwlwifi: mvm: don't use SAR Geo if basic SAR is not usedLuca Coelho
We can't use SAR Geo if basic SAR is not enabled, since the SAR Geo tables define offsets in relation to the basic SAR table in use. To fix this, make iwl_mvm_sar_init() return one in case WRDS is not available, so we can skip reading WGDS entirely. Fixes: a6bff3cb19b7 ("iwlwifi: mvm: add GEO_TX_POWER_LIMIT cmd for geographic tx power table") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-15iwlwifi: fix D3 debug data buffer memory leakShahar S Matityahu
If the driver is unloaded when D3 debug data pulling is enabled but not triggered, it doesn't release the data buffer. Fix this by adding iwl_fw_runtime_free and calling it from the relevant places. Fixes: 2d8c261511ab ("iwlwifi: add d3 debug data support") Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-15iwlwifi: mvm: fix regulatory domain update when the firmware startsEmmanuel Grumbach
When the firmware starts, it doesn't have any regulatory information, hence it uses the world wide limitations. The driver can feed the firmware with previous knowledge that was kept in the driver, but the firmware may still not update its internal tables. This happens when we start a BSS interface, and then the firmware can change the regulatory tables based on our location and it'll use more lenient, location specific rules. Then, if the firmware is shut down (when the interface is brought down), and then an AP interface is created, the firmware will forget the country specific rules. The host will think that we are in a certain country that may allow channels and will try to teach the firmware about our location, but the firmware may still not allow to drop the world wide limitations and apply country specific rules because it was just re-started. In this case, the firmware will reply with MCC_RESP_ILLEGAL to the MCC_UPDATE_CMD. In that case, iwlwifi needs to let the upper layers (cfg80211 / hostapd) know that the channel list they know about has been updated. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201105 Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-15iwlwifi: mvm: support sta_statistics() even on older firmwareEmmanuel Grumbach
The oldest firmware supported by iwlmvm do support getting the average beacon RSSI. Enable the sta_statistics() call from mac80211 even on older firmware versions. Fixes: 33cef9256342 ("iwlwifi: mvm: support beacon statistics for BSS client") Cc: stable@vger.kernel.org # 4.2+ Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-15iwlwifi: fix wrong WGDS_WIFI_DATA_SIZEMatt Chen
From coreboot/BIOS: Name ("WGDS", Package() { Revision, Package() { DomainType, // 0x7:WiFi ==> We miss this one. WgdsWiFiSarDeltaGroup1PowerMax1, // Group 1 FCC 2400 Max WgdsWiFiSarDeltaGroup1PowerChainA1, // Group 1 FCC 2400 A Offset WgdsWiFiSarDeltaGroup1PowerChainB1, // Group 1 FCC 2400 B Offset WgdsWiFiSarDeltaGroup1PowerMax2, // Group 1 FCC 5200 Max WgdsWiFiSarDeltaGroup1PowerChainA2, // Group 1 FCC 5200 A Offset WgdsWiFiSarDeltaGroup1PowerChainB2, // Group 1 FCC 5200 B Offset WgdsWiFiSarDeltaGroup2PowerMax1, // Group 2 EC Jap 2400 Max WgdsWiFiSarDeltaGroup2PowerChainA1, // Group 2 EC Jap 2400 A Offset WgdsWiFiSarDeltaGroup2PowerChainB1, // Group 2 EC Jap 2400 B Offset WgdsWiFiSarDeltaGroup2PowerMax2, // Group 2 EC Jap 5200 Max WgdsWiFiSarDeltaGroup2PowerChainA2, // Group 2 EC Jap 5200 A Offset WgdsWiFiSarDeltaGroup2PowerChainB2, // Group 2 EC Jap 5200 B Offset WgdsWiFiSarDeltaGroup3PowerMax1, // Group 3 ROW 2400 Max WgdsWiFiSarDeltaGroup3PowerChainA1, // Group 3 ROW 2400 A Offset WgdsWiFiSarDeltaGroup3PowerChainB1, // Group 3 ROW 2400 B Offset WgdsWiFiSarDeltaGroup3PowerMax2, // Group 3 ROW 5200 Max WgdsWiFiSarDeltaGroup3PowerChainA2, // Group 3 ROW 5200 A Offset WgdsWiFiSarDeltaGroup3PowerChainB2, // Group 3 ROW 5200 B Offset } }) When read the ACPI data to find out the WGDS, the DATA_SIZE is never matched. From the above format, it gives 19 numbers, but our driver is hardcode as 18. Fix it to pass then can parse the data into our wgds table. Then we will see: iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init Sending GEO_TX_POWER_LIMIT iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[0] Band[0]: chain A = 68 chain B = 69 max_tx_power = 54 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[0] Band[1]: chain A = 48 chain B = 49 max_tx_power = 70 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[1] Band[0]: chain A = 51 chain B = 67 max_tx_power = 50 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[1] Band[1]: chain A = 69 chain B = 70 max_tx_power = 68 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[2] Band[0]: chain A = 49 chain B = 50 max_tx_power = 48 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[2] Band[1]: chain A = 52 chain B = 53 max_tx_power = 51 Cc: stable@vger.kernel.org # 4.12+ Fixes: a6bff3cb19b7 ("iwlwifi: mvm: add GEO_TX_POWER_LIMIT cmd for geographic tx power table") Signed-off-by: Matt Chen <matt.chen@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-15net_sched: sch_fq: ensure maxrate fq parameter applies to EDT flowsEric Dumazet
When EDT conversion happened, fq lost the ability to enfore a maxrate for all flows. It kept it for non EDT flows. This commit restores the functionality. Tested: tc qd replace dev eth0 root fq maxrate 500Mbit netperf -P0 -H host -- -O THROUGHPUT 489.75 Fixes: ab408b6dc744 ("tcp: switch tcp and sch_fq to new earliest departure time model") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15rxrpc: Fix life checkDavid Howells
The life-checking function, which is used by kAFS to make sure that a call is still live in the event of a pending signal, only samples the received packet serial number counter; it doesn't actually provoke a change in the counter, rather relying on the server to happen to give us a packet in the time window. Fix this by adding a function to force a ping to be transmitted. kAFS then keeps track of whether there's been a stall, and if so, uses the new function to ping the server, resetting the timeout to allow the reply to come back. If there's a stall, a ping and the call is *still* stalled in the same place after another period, then the call will be aborted. Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals") Fixes: f4d15fb6f99a ("rxrpc: Provide functions for allowing cleaner handling of signals") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15ASoC: pcm186x: Fix device reset-registers trigger valueAndreas Dannenberg
According to the current device datasheet (TI Lit # SLAS831D, revised March 2018) the value written to the device's PAGE register to trigger a complete register reset should be 0xfe, not 0xff. So go ahead and update to the correct value. Reported-by: Stephane Le Provost <stephane.leprovost@mediatek.com> Tested-by: Stephane Le Provost <stephane.leprovost@mediatek.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Acked-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2018-11-15cxgb4: fix thermal zone build errorGanesh Goudar
with CONFIG_THERMAL=m and cxgb4 as built-in build fails, and 'commit e70a57fa59bb ("cxgb4: fix thermal configuration dependencies")' tries to fix it but when cxgb4i is made built-in build fails again, use IS_REACHABLE instead of IS_ENABLED to fix the issue. Fixes: e70a57fa59bb (cxgb4: fix thermal configuration dependencies) Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15MAINTAINERS: Replace Vince Bridgers as Altera TSE maintainerThor Thayer
Vince has moved to a different role. Replace him as Altera TSE maintainer. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Acked-by: Vince Bridgers <vince.bridgers@intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15Merge branch 'bnxt_en-Bug-fixes'David S. Miller
Michael Chan says: ==================== bnxt_en: Bug fixes. Most of the bug fixes are related to the new 57500 chips, including some initialization and counter fixes, disabling RDMA support, and a workaround for occasional missing interrupts. The last patch from Vasundhara fixes the year/month parameters for firmware coredump. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15bnxt_en: Fix filling time in bnxt_fill_coredump_record()Vasundhara Volam
Fix the year and month offset while storing it in bnxt_fill_coredump_record(). Fixes: 6c5657d085ae ("bnxt_en: Add support for ethtool get dump.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15bnxt_en: Add software "missed_irqs" counter.Michael Chan
To keep track of the number of times the workaround code for 57500 A0 has been triggered. This is a per NQ counter. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15bnxt_en: Workaround occasional TX timeout on 57500 A0.Michael Chan
Hardware can sometimes not generate NQ MSIX with a single pending CP ring entry. This seems to always happen at the last entry of the CP ring before it wraps. Add logic to check all the CP rings for pending entries without the CP ring consumer index advancing. Calling HWRM_DBG_RING_INFO_GET to read the context of the CP ring will flush out the NQ entry and MSIX. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15bnxt_en: Disable RDMA support on the 57500 chips.Michael Chan
There is no RDMA support on 57500 chips yet, so prevent bnxt_re from registering on these chips. There is intermittent failure if bnxt_re is allowed to register and proceed with RDMA operations. Fixes: 1ab968d2f1d6 ("bnxt_en: Add PCI ID for BCM57508 device.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15bnxt_en: Fix rx_l4_csum_errors counter on 57500 devices.Michael Chan
The software counter structure is defined in both the CP ring's structure and the NQ ring's structure on the new devices. The legacy code adds the counter to the CP ring's structure and the counter won't get displayed since the ethtool code is looking at the NQ ring's structure. Since all other counters are contained in the NQ ring's structure, it makes more sense to count rx_l4_csum_errors in the NQ. Fixes: 50e3ab7836b5 ("bnxt_en: Allocate completion ring structures for 57500 series chips.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15bnxt_en: Fix RSS context allocation.Michael Chan
Recent commit has added the reservation of RSS context. This requires bnxt_hwrm_vnic_qcaps() to be called before allocating any RSS contexts. The bnxt_hwrm_vnic_qcaps() call sets up proper flags that will determine how many RSS contexts to allocate to support NTUPLE. This causes a regression that too many RSS contexts are being reserved and causing resource shortage when enabling many VFs. Fix it by calling bnxt_hwrm_vnic_qcaps() earlier. Fixes: 41e8d7983752 ("bnxt_en: Modify the ring reservation functions for 57500 series chips.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15Merge tag 'selinux-pr-20181115' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull SELinux fixes from Paul Moore: "Two small SELinux fixes for v4.20. Ondrej's patch adds a check on user input, and my patch ensures we don't look past the end of a buffer. Both patches are quite small and pass the selinux-testsuite" * tag 'selinux-pr-20181115' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: fix non-MLS handling in mls_context_to_sid() selinux: check length properly in SCTP bind hook
2018-11-15Merge tag 'pinctrl-v4.20-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - A bunch of fixes for the Allwinner meson platform - Establish a git repo for Intel pin control in MAINTAINERS * tag 'pinctrl-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: MAINTAINERS: Add tree link for Intel pin control driver pinctrl: meson: fix meson8b ao pull register bits pinctrl: meson: fix meson8 ao pull register bits pinctrl: meson: fix gxl ao pull register bits pinctrl: meson: fix gxbb ao pull register bits pinctrl: meson: fix pinconf bias disable
2018-11-15usb: xhci: Prevent bus suspend if a port connect change or polling state is ↵Mathias Nyman
detected USB3 roothub might autosuspend before a plugged USB3 device is detected, causing USB3 device enumeration failure. USB3 devices don't show up as connected and enabled until USB3 link trainig completes. On a fast booting platform with a slow USB3 link training the link might reach the connected enabled state just as the bus is suspending. If this device is discovered first time by the xhci_bus_suspend() routine it will be put to U3 suspended state like the other ports which failed to suspend earlier. The hub thread will notice the connect change and resume the bus, moving the port back to U0 This U0 -> U3 -> U0 transition right after being connected seems to be too much for some devices, causing them to first go to SS.Inactive state, and finally end up stuck in a polling state with reset asserted Fix this by failing the bus suspend if a port has a connect change or is in a polling state in xhci_bus_suspend(). Don't do any port changes until all ports are checked, buffer all port changes and only write them in the end if suspend can proceed Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-15Merge tag 'nfs-for-4.20-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable fixes: - Don't exit the NFSv4 state manager without clearing NFS4CLNT_MANAGER_RUNNING Bugfixes: - Fix an Oops when destroying the RPCSEC_GSS credential cache - Fix an Oops during delegation callbacks - Ensure that the NFSv4 state manager exits the loop on SIGKILL - Fix a bogus get/put in generic_key_to_expire()" * tag 'nfs-for-4.20-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Fix an Oops during delegation callbacks SUNRPC: Fix a bogus get/put in generic_key_to_expire() SUNRPC: Fix a Oops when destroying the RPCSEC_GSS credential cache NFSv4: Ensure that the state manager exits the loop on SIGKILL NFSv4: Don't exit the state manager without clearing NFS4CLNT_MANAGER_RUNNING
2018-11-15drm/vc4: Set ->legacy_cursor_update to false when doing non-async updatesBoris Brezillon
drm_atomic_helper_setup_commit() auto-completes commit->flip_done when state->legacy_cursor_update is true, but we know for sure that we want a sync update when we call drm_atomic_helper_setup_commit() from vc4_atomic_commit(). Explicitly set state->legacy_cursor_update to false to prevent this auto-completion. Fixes: 184d3cf4f738 ("drm/vc4: Use wait_for_flip_done() instead of wait_for_vblanks()") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181115105852.9844-2-boris.brezillon@bootlin.com
2018-11-15drm/vc4: Fix NULL pointer dereference in the async update pathBoris Brezillon
vc4_plane_atomic_async_update() calls vc4_plane_atomic_check() which in turn calls vc4_plane_setup_clipping_and_scaling(), and since commit 58a6a36fe8e0 ("drm/vc4: Use drm_atomic_helper_check_plane_state() to simplify the logic"), this function accesses plane_state->state which will be NULL when called from the async update path because we're passing the current plane state, and plane_state->state has been assigned to NULL in drm_atomic_helper_swap_state(). Pass the new state instead of the current one (the new state has ->state set to a non-NULL value). Fixes: 58a6a36fe8e0 ("drm/vc4: Use drm_atomic_helper_check_plane_state() to simplify the logic") Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181115105852.9844-1-boris.brezillon@bootlin.com
2018-11-16Merge branch 'drm-fixes-4.20' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Fixes for 4.20: - Fix for huge page handling that caused a GPUVM fault in some cases - Fix IH ring setup - Fix for xgmi aperture setup - Fix for watermark setup for SMU Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181114171853.2866-1-alexander.deucher@amd.com
2018-11-16Merge tag 'drm-misc-fixes-2018-11-14' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Cross-subsystem: - omap: Instantiate dss children in omapdss instead of mach (Laurent) Other: - htmldocs build warning (Sean) - MST NULL deref fix (Stanislav) - omap: Various runtime ref gets on probe/bind (Laurent) - omap: Fix to the above dss children patch (Tony) Cc: Sean Paul <sean@poorly.run> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20181114204542.GA52569@art_vandelay
2018-11-15selftests/powerpc: Adjust wild_bctr to build with old binutilsGustavo Romero
Currently the selftest wild_bctr can fail to build when an old gcc is used, notably on gcc using a binutils version <= 2.27, because the assembler does not support the integer suffix UL. This patch adjusts the wild_bctr test so the REG_POISON value is still treated as an unsigned long for the shifts on compilation but the UL suffix is absent on the stringification, so the inline asm code generated has no UL suffixes. Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com> [mpe: Wrap long line] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-15drm/i915: Account for scale factor when calculating initial phaseVille Syrjälä
To get the initial phase correct we need to account for the scale factor as well. I forgot this initially and was mostly looking at heavily upscaled content where the minor difference between -0.5 and the proper initial phase was not readily apparent. And let's toss in a comment that tries to explain the formula a little bit. v2: The initial phase upper limit is 1.5, not 24.0! Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 0a59952b24e2 ("drm/i915: Configure SKL+ scaler initial phase correctly") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181029181820.21956-1-ville.syrjala@linux.intel.com Tested-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Tested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc (cherry picked from commit e7a278a329dd8aa2c70c564849f164cb5673689c) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-15drm/i915: Clean up skl_program_scaler()Ville Syrjälä
Remove the "sizes are 0 based" stuff that is not even true for the scaler. v2: Rebase Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101151736.20522-1-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit d0105af939769393d6447a04cee2d1ae12e3f09a) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-15drm/i915: Move programming plane scaler to its own function.Maarten Lankhorst
This cleans the code up slightly, and will make other changes easier. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920102711.4184-8-maarten.lankhorst@linux.intel.com (cherry picked from commit ab5c60bf76755d24ae8de5c1c6ac594934656ace) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-15nvme-fc: resolve io failures during connectJames Smart
If an io error occurs on an io issued while connecting, recovery of the io falls flat as the state checking ends up nooping the error handler. Create an err_work work item that is scheduled upon an io error while connecting. The work thread terminates all io on all queues and marks the queues as not connected. The termination of the io will return back to the callee, which will then back out of the connection attempt and will reschedule, if possible, the connection attempt. The changes: - in case there are several commands hitting the error handler, a state flag is kept so that the error work is only scheduled once, on the first error. The subsequent errors can be ignored. - The calling sequence to stop keep alive and terminate the queues and their io is lifted from the reset routine. Made a small service routine used by both reset and err_work. - During debugging, found that the teardown path can reference an uninitialized pointer, resulting in a NULL pointer oops. The aen_ops weren't initialized yet. Add validation on their initialization before calling the teardown routine. Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-11-15efi: Permit calling efi_mem_reserve_persistent() from atomic contextArd Biesheuvel
Currently, efi_mem_reserve_persistent() may not be called from atomic context, since both the kmalloc() call and the memremap() call may sleep. The kmalloc() call is easy enough to fix, but the memremap() call needs to be moved into an init hook since we cannot control the memory allocation behavior of memremap() at the call site. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20181114175544.12860-6-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-15efi/arm: Defer persistent reservations until after paging_init()Ard Biesheuvel
The new memory EFI reservation feature we introduced to allow memory reservations to persist across kexec may trigger an unbounded number of calls to memblock_reserve(). The memblock subsystem can deal with this fine, but not before memblock resizing is enabled, which we can only do after paging_init(), when the memory we reallocate the array into is actually mapped. So break out the memreserve table processing into a separate routine and call it after paging_init() on arm64. On ARM, because of limited reviewing bandwidth of the maintainer, we cannot currently fix this, so instead, disable the EFI persistent memreserve entirely on ARM so we can fix it later. Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20181114175544.12860-5-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-15efi/arm/libstub: Pack FDT after populating itArd Biesheuvel
Commit: 24d7c494ce46 ("efi/arm-stub: Round up FDT allocation to mapping size") increased the allocation size for the FDT image created by the stub to a fixed value of 2 MB, to simplify the former code that made several attempts with increasing values for the size. This is reasonable given that the allocation is of type EFI_LOADER_DATA, which is released to the kernel unless it is explicitly memblock_reserve()d by the early boot code. However, this allocation size leaked into the 'size' field of the FDT header metadata, and so the entire allocation remains occupied by the device tree binary, even if most of it is not used to store device tree information. So call fdt_pack() to shrink the FDT data structure to its minimum size after populating all the fields, so that the remaining memory is no longer wasted. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: <stable@vger.kernel.org> # v4.12+ Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 24d7c494ce46 ("efi/arm-stub: Round up FDT allocation to mapping size") Link: http://lkml.kernel.org/r/20181114175544.12860-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-15efi/arm: Revert deferred unmap of early memmap mappingArd Biesheuvel
Commit: 3ea86495aef2 ("efi/arm: preserve early mapping of UEFI memory map longer for BGRT") deferred the unmap of the early mapping of the UEFI memory map to accommodate the ACPI BGRT code, which looks up the memory type that backs the BGRT table to validate it against the requirements of the UEFI spec. Unfortunately, this causes problems on ARM, which does not permit early mappings to persist after paging_init() is called, resulting in a WARN() splat. Since we don't support the BGRT table on ARM anway, let's revert ARM to the old behaviour, which is to take down the early mapping at the end of efi_init(). Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 3ea86495aef2 ("efi/arm: preserve early mapping of UEFI memory ...") Link: http://lkml.kernel.org/r/20181114175544.12860-3-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-15efi: Fix debugobjects warning on 'efi_rts_work'Waiman Long
The following commit: 9dbbedaa6171 ("efi: Make efi_rts_work accessible to efi page fault handler") converted 'efi_rts_work' from an auto variable to a global variable. However, when submitting the work, INIT_WORK_ONSTACK() was still used, causing the following complaint from debugobjects: ODEBUG: object 00000000ed27b500 is NOT on stack 00000000c7d38760, but annotated. Change the macro to just INIT_WORK() to eliminate the warning. Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 9dbbedaa6171 ("efi: Make efi_rts_work accessible to efi page fault handler") Link: http://lkml.kernel.org/r/20181114175544.12860-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-14l2tp: fix a sock refcnt leak in l2tp_tunnel_registerXin Long
This issue happens when trying to add an existent tunnel. It doesn't call sock_put() before returning -EEXIST to release the sock refcnt that was held by calling sock_hold() before the existence check. This patch is to fix it by holding the sock after doing the existence check. Fixes: f6cd651b056f ("l2tp: fix race in duplicate tunnel detection") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15powerpc/64: Fix kernel stack 16-byte alignmentNicholas Piggin
Commit 4c2de74cc869 ("powerpc/64: Interrupts save PPR on stack rather than thread_struct") changed sizeof(struct pt_regs) % 16 from 0 to 8, which causes the interrupt frame allocation on kernel entry to put the kernel stack out of alignment. Quadword (16-byte) alignment for the stack is required by both the 64-bit v1 ABI (v1.9 § 3.2.2) and the 64-bit v2 ABI (v1.1 § 2.2.2.1). Add a pad field to fix alignment, and add a BUILD_BUG_ON to catch this in future. Fixes: 4c2de74cc869 ("powerpc/64: Interrupts save PPR on stack rather than thread_struct") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-15KVM: PPC: Book3S HV: Fix handling for interrupted H_ENTER_NESTEDMichael Roth
While running a nested guest VCPU on L0 via H_ENTER_NESTED hcall, a pending signal in the L0 QEMU process can generate the following sequence: ret0 = kvmppc_pseries_do_hcall() ret1 = kvmhv_enter_nested_guest() ret2 = kvmhv_run_single_vcpu() if (ret2 == -EINTR) return H_INTERRUPT if (ret1 == H_INTERRUPT) kvmppc_set_gpr(vcpu, 3, 0) return -EINTR /* skipped: */ kvmppc_set_gpr(vcpu, 3, ret) vcpu->arch.hcall_needed = 0 return RESUME_GUEST which causes an exit to L0 userspace with ret0 == -EINTR. The intention seems to be to set the hcall return value to 0 (via VCPU r3) so that L1 will see a successful return from H_ENTER_NESTED once we resume executing the VCPU. However, because we don't set vcpu->arch.hcall_needed = 0, we do the following once userspace resumes execution via kvm_arch_vcpu_ioctl_run(): ... } else if (vcpu->arch.hcall_needed) { int i kvmppc_set_gpr(vcpu, 3, run->papr_hcall.ret); for (i = 0; i < 9; ++i) kvmppc_set_gpr(vcpu, 4 + i, run->papr_hcall.args[i]); vcpu->arch.hcall_needed = 0; since vcpu->arch.hcall_needed == 1 indicates that userspace should have handled the hcall and stored the return value in run->papr_hcall.ret. Since that's not the case here, we can get an unexpected value in VCPU r3, which can result in kvmhv_p9_guest_entry() reporting an unexpected trap value when it returns from H_ENTER_NESTED, causing the following register dump to console via subsequent call to kvmppc_handle_exit_hv() in L1: [ 350.612854] vcpu 00000000f9564cf8 (0): [ 350.612915] pc = c00000000013eb98 msr = 8000000000009033 trap = 1 [ 350.613020] r 0 = c0000000004b9044 r16 = 0000000000000000 [ 350.613075] r 1 = c00000007cffba30 r17 = 0000000000000000 [ 350.613120] r 2 = c00000000178c100 r18 = 00007fffc24f3b50 [ 350.613166] r 3 = c00000007ef52480 r19 = 00007fffc24fff58 [ 350.613212] r 4 = 0000000000000000 r20 = 00000a1e96ece9d0 [ 350.613253] r 5 = 70616d00746f6f72 r21 = 00000a1ea117c9b0 [ 350.613295] r 6 = 0000000000000020 r22 = 00000a1ea1184360 [ 350.613338] r 7 = c0000000783be440 r23 = 0000000000000003 [ 350.613380] r 8 = fffffffffffffffc r24 = 00000a1e96e9e124 [ 350.613423] r 9 = c00000007ef52490 r25 = 00000000000007ff [ 350.613469] r10 = 0000000000000004 r26 = c00000007eb2f7a0 [ 350.613513] r11 = b0616d0009eccdb2 r27 = c00000007cffbb10 [ 350.613556] r12 = c0000000004b9000 r28 = c00000007d83a2c0 [ 350.613597] r13 = c000000001b00000 r29 = c0000000783cdf68 [ 350.613639] r14 = 0000000000000000 r30 = 0000000000000000 [ 350.613681] r15 = 0000000000000000 r31 = c00000007cffbbf0 [ 350.613723] ctr = c0000000004b9000 lr = c0000000004b9044 [ 350.613765] srr0 = 0000772f954dd48c srr1 = 800000000280f033 [ 350.613808] sprg0 = 0000000000000000 sprg1 = c000000001b00000 [ 350.613859] sprg2 = 0000772f9565a280 sprg3 = 0000000000000000 [ 350.613911] cr = 88002848 xer = 0000000020040000 dsisr = 42000000 [ 350.613962] dar = 0000772f95390000 [ 350.614031] fault dar = c000000244b278c0 dsisr = 00000000 [ 350.614073] SLB (0 entries): [ 350.614157] lpcr = 0040000003d40413 sdr1 = 0000000000000000 last_inst = ffffffff [ 350.614252] trap=0x1 | pc=0xc00000000013eb98 | msr=0x8000000000009033 followed by L1's QEMU reporting the following before stopping execution of the nested guest: KVM: unknown exit, hardware reason 1 NIP c00000000013eb98 LR c0000000004b9044 CTR c0000000004b9000 XER 0000000020040000 CPU#0 MSR 8000000000009033 HID0 0000000000000000 HF 8000000000000000 iidx 3 didx 3 TB 00000000 00000000 DECR 00000000 GPR00 c0000000004b9044 c00000007cffba30 c00000000178c100 c00000007ef52480 GPR04 0000000000000000 70616d00746f6f72 0000000000000020 c0000000783be440 GPR08 fffffffffffffffc c00000007ef52490 0000000000000004 b0616d0009eccdb2 GPR12 c0000000004b9000 c000000001b00000 0000000000000000 0000000000000000 GPR16 0000000000000000 0000000000000000 00007fffc24f3b50 00007fffc24fff58 GPR20 00000a1e96ece9d0 00000a1ea117c9b0 00000a1ea1184360 0000000000000003 GPR24 00000a1e96e9e124 00000000000007ff c00000007eb2f7a0 c00000007cffbb10 GPR28 c00000007d83a2c0 c0000000783cdf68 0000000000000000 c00000007cffbbf0 CR 88002848 [ L L - - E L G L ] RES ffffffffffffffff SRR0 0000772f954dd48c SRR1 800000000280f033 PVR 00000000004e1202 VRSAVE 0000000000000000 SPRG0 0000000000000000 SPRG1 c000000001b00000 SPRG2 0000772f9565a280 SPRG3 0000000000000000 SPRG4 0000000000000000 SPRG5 0000000000000000 SPRG6 0000000000000000 SPRG7 0000000000000000 HSRR0 0000000000000000 HSRR1 0000000000000000 CFAR 0000000000000000 LPCR 0000000003d40413 PTCR 0000000000000000 DAR 0000772f95390000 DSISR 0000000042000000 Fix this by setting vcpu->arch.hcall_needed = 0 to indicate completion of H_ENTER_NESTED before we exit to L0 userspace. Fixes: 360cae313702 ("KVM: PPC: Book3S HV: Nested guest entry via hypercall") Cc: linuxppc-dev@ozlabs.org Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
generated by cgit (git 2.34.1) at 2025-09-13 09:53:21 +0000