Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- btnxpuart: Fix recv_buf return value
- L2CAP: Fix responding with multiple rejects
- Fix atomicity violation in {min,max}_key_size_set
- ISO: Allow binding a PA sync socket
- ISO: Reassociate a socket with an active BIS
- ISO: Avoid creating child socket if PA sync is terminating
- Add device 13d3:3572 IMC Networks Bluetooth Radio
- Don't suspend when there are connections
- Remove le_restart_scan work
- Fix bogus check for re-auth not supported with non-ssp
- lib: Add documentation to exported functions
- Support HFP offload for QCA2066
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Unlock before returning on the error path.
Fixes: 86b20af11e84 ("usb: yurex: Replace snprintf() with the safer scnprintf() variant")
Reported-by: Dan Carpenter <error27@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202312170252.3udgrIcP-lkp@intel.com/
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20231219063639.450994-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The TPS6598x PD controller supports firmware updates that can be loaded
either from an external flash memory or a host using the device's I2C
host interface. This patch implements the second approach, which is
especially relevant if no flash memory is available.
In order to make patch bundle updates, a series of tasks (special
commands) must be sent to the device as it is documented in the
TPS65987DDH and TPS65988DH Host Interface Technical Reference Manual[1],
section 4.11 (Patch Bundle Update Tasks).
The update sequence is as follows:
1. PTCs - Start Patch Load Sequence: the proposed approach includes
device and application configuration data.
2. PTCd - Patch Download: 64-byte data chunks must be sent until the end
of the firmware file is reached (the last chunk may be shorter).
3. PTCc - Patch Data Transfer Complete: ends the patch loading sequence.
After this sequence and if no errors occurred, the device will change
its mode to 'APP' after SETUP_MS milliseconds, and then it will be ready
for normal operation.
[1] https://www.ti.com/lit/ug/slvubh2b/slvubh2b.pdf?ts=1697623299919&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FTPS65987D
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231207-tps6598x_update-v2-4-f3cfcde6d890@wolfvision.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The input data passed to execute commands with tps6598x_exec_cmd()
is not supposed to be modified by the function. Moreover, this data is
passed to tps6598x_exec_cmd_tmo() and finally to tps6598x_block_write(),
which expects a const pointer.
The current implementation does not produce any bugs, but it discards
const qualifiers from the pointers passed as arguments. This leads to
compile issues if 'discarded-qualifiers' is active and a const pointer
is passed to the function, which is the case if data from a firmware
structure is passed to execute update commands. Adding the const
modifier to in_data prevents such issues and provides code consistency.
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231207-tps6598x_update-v2-3-f3cfcde6d890@wolfvision.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The firmware request process is device agnostic and can be used for
other parts.
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231207-tps6598x_update-v2-2-f3cfcde6d890@wolfvision.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The current implementation includes a number of special cases for the
tps25750. Nevertheless, init and reset functions can be generalized by
adding function pointers to the tipd_data structure in order to offer
that functionality to other parts without additional conditional
clauses.
Some functionality like the cold reset request (GAID) is shared by the
tps25750 and the tps6598x, so they can use the same reset function.
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231207-tps6598x_update-v2-1-f3cfcde6d890@wolfvision.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit f061c9f7d058 ("Documentation: Document each netlink family") added
a new Python script that is invoked during 'make htmldocs' and which reads
the netlink YAML spec files.
Using the virtualenv from scripts/sphinx-pre-install, we get this new
error wen running 'make htmldocs':
Traceback (most recent call last):
File "./tools/net/ynl/ynl-gen-rst.py", line 26, in <module>
import yaml
ModuleNotFoundError: No module named 'yaml'
make[2]: *** [Documentation/Makefile:112: Documentation/networking/netlink_spec/rt_link.rst] Error 1
make[1]: *** [Makefile:1708: htmldocs] Error 2
Fix this by adding 'pyyaml' to requirements.txt.
Note: This was somehow present in the original patch submission:
<https://lore.kernel.org/all/20231103135622.250314-1-leitao@debian.org/>
I'm not sure why the pyyaml requirement disappeared in the meantime.
Fixes: f061c9f7d058 ("Documentation: Document each netlink family")
Cc: Breno Leitao <leitao@debian.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix spelling typo in comments.
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: liyouhong <liyouhong@kylinos.cn>
Link: https://lore.kernel.org/r/20231221023425.1316397-1-liyouhong@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit e835c0a4e23c38531dcee5ef77e8d1cf462658c7.
Don't omit soft-reset. During initialization, the driver may need to
perform a soft reset to ensure the phy is ready when the controller
updates the GCTL.PRTCAPDIR or other settings by issuing phy soft-reset.
Many platforms often have access to DCTL register for soft-reset despite
being host-only. If there are actual reported issues from the platforms
that don't expose DCTL registers, then we will need to revisit (perhaps
to teach dwc3 to perform xhci's soft-reset USBCMD.HCRST).
Cc: <stable@vger.kernel.org>
Fixes: e835c0a4e23c ("usb: dwc3: don't reset device side if dwc3 was configured as host-only")
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/7668ab11a48f260820825274976eb41fec7f54d1.1703282469.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 8bea147dfdf823eaa8d3baeccc7aeb041b41944b.
The phy soft reset GUSB2PHYCFG.PHYSOFTRST only applies to UTMI phy, not
ULPI. This fix is incomplete.
Cc: <stable@vger.kernel.org>
Fixes: 8bea147dfdf8 ("usb: dwc3: Soft reset phy on probe for host")
Reported-by: Köry Maincent <kory.maincent@bootlin.com>
Closes: https://lore.kernel.org/linux-usb/20231205151959.5236c231@kmaincent-XPS-13-7390
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/29a26593a60eba727de872a3e580a674807b3339.1703282469.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The DWC2 IP on the Rockchip SoCs doesn't support clock gating.
When a clock gating is enabled, system hangs.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Link: https://lore.kernel.org/r/1703575199-23638-1-git-send-email-william.wu@rock-chips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit b17b7fe6dd5c6ff74b38b0758ca799cdbb79e26e.
That commit messed up the reference counting, so it needs to
be rethought.
Fixes: b17b7fe6dd5c ("usb: typec: class: fix typec_altmode_put_partner to put plugs")
Cc: <stable@vger.kernel.org>
Cc: RD Babiera <rdbabiera@google.com>
Reported-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Closes: https://lore.kernel.org/lkml/CAP-bSRb3SXpgo_BEdqZB-p1K5625fMegRZ17ZkPE1J8ZYgEHDg@mail.gmail.com/
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240102091142.2136472-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Matthieu Baerts says:
====================
mptcp: add CurrEstab MIB counter
This MIB counter is similar to the one of TCP -- CurrEstab -- available
in /proc/net/snmp. This is useful to quickly list the number of MPTCP
connections without having to iterate over all of them.
Patch 1 prepares its support by adding new helper functions:
- MPTCP_DEC_STATS(): similar to MPTCP_INC_STATS(), but this time to
decrement a counter.
- mptcp_set_state(): similar to tcp_set_state(), to change the state of
an MPTCP socket, and to inc/decrement the new counter when needed.
Patch 2 uses mptcp_set_state() instead of directly calling
inet_sk_state_store() to change the state of MPTCP sockets.
Patch 3 and 4 validate the new feature in MPTCP "join" and "diag"
selftests.
====================
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a new helper chk_msk_cestab() to check the current
established connections counter MIB_CURRESTAB in diag.sh. Invoke it
to check the counter during the connection after every chk_msk_inuse().
Signed-off-by: Geliang Tang <geliang.tang@linux.dev>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a new helper chk_cestab_nr() to check the current
established connections counter MIB_CURRESTAB. Set the newly added
variables cestab_ns1 and cestab_ns2 to indicate how many connections
are expected in ns1 or ns2.
Invoke check_cestab() to check the counter during the connection in
do_transfer() and invoke chk_cestab_nr() to re-check it when the
connection closed. These checks are embedded in add_tests().
Signed-off-by: Geliang Tang <geliang.tang@linux.dev>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch replaces all the 'inet_sk_state_store()' calls under net/mptcp
with the new helper mptcp_set_state().
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/460
Signed-off-by: Geliang Tang <geliang.tang@linux.dev>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a new MIB counter named MPTCP_MIB_CURRESTAB to count current
established MPTCP connections, similar to TCP_MIB_CURRESTAB. This is
useful to quickly list the number of MPTCP connections without having to
iterate over all of them.
This patch adds a new helper function mptcp_set_state(): if the state
switches from or to ESTABLISHED state, this newly added counter is
incremented. This helper is going to be used in the following patch.
Similar to MPTCP_INC_STATS(), a new helper called MPTCP_DEC_STATS() is
also needed to decrement a MIB counter.
Signed-off-by: Geliang Tang <geliang.tang@linux.dev>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Dmitry Safonov says:
====================
selftest/net: Some more TCP-AO selftest post-merge fixups
Note that there's another post-merge fix for TCP-AO selftests, but that
doesn't conflict with these, so I don't resend that:
https://lore.kernel.org/all/20231219-b4-tcp-ao-selftests-out-of-tree-v1-1-0fff92d26eac@arista.com/T/#u
====================
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
|
|
Since commit f5769faeec36 ("net: Namespace-ify sysctl_optmem_max")
optmem_max is per-netns, so need of switching to root namespace.
It seems trivial to keep the old logic working, so going to keep it for
a while (at least, until kernel with netns-optmem_max will be release).
Currently, there is a test that checks that optmem_max limit applies to
TCP-AO keys and a little benchmark that measures linked-list TCP-AO keys
scaling, those are fixed by this.
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In unsigned-md5 selftests ip_route_add() is not needed in
client_add_ip(): the route was pre-setup in __test_init() => link_init()
for subnet, rather than a specific ip-address.
Currently, __ip_route_add() mistakenly always sets VRF table
to RT_TABLE_MAIN - this seems to have sneaked in during unsigned-md5
tests debugging. That also explains, why ip_route_add_vrf() ignored
EEXIST, returned by fib6.
Yet, keep EEXIST ignoring in bench-lookups selftests as it's expected
that those selftests may add the same (duplicate) routes.
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into char-misc-next
Mika writes:
thunderbolt: Changes for v6.8 merge window
This includes following USB4/Thunderbolt changes for the v6.8 merge
window:
- Intel Lunar Lake support
- PCIe tunneling improvements
- DisplayPort tunneling improvements
- Asymmetric switching improvements
- Couple of minor fixes and cleanups.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Reduce retry timeout to speed up boot for some devices
thunderbolt: Keep link as asymmetric if preferred by hardware
thunderbolt: Add support for Intel Lunar Lake
thunderbolt: Disable PCIe extended encapsulation upon teardown properly
thunderbolt: Make PCIe tunnel setup and teardown follow CM guide
thunderbolt: Improve logging when DisplayPort resource is added due to hotplug
thunderbolt: Use tb_dp_read_cap() to read DP_COMMON_CAP as well
thunderbolt: Disable CL states only when actually needed
thunderbolt: Transition link to asymmetric only when both sides support it
thunderbolt: Log XDomain link speed and width
thunderbolt: Move width_name() helper to tb.h
thunderbolt: Handle lane bonding of Gen 4 XDomain links properly
thunderbolt: Unwind TMU configuration if tb_switch_set_tmu_mode_params() fails
thunderbolt: Remove duplicated re-assignment of pointer 'out'
|
|
Commit 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW") added the new
socket option SO_TIMESTAMPING_NEW. Setting the option is handled in
sk_setsockopt(), querying it was not handled in sk_getsockopt(), though.
Following remarks on an earlier submission of this patch, keep the old
behavior of getsockopt(SO_TIMESTAMPING_OLD) which returns the active
flags even if they actually have been set through SO_TIMESTAMPING_NEW.
The new getsockopt(SO_TIMESTAMPING_NEW) is stricter, returning flags
only if they have been set through the same option.
Fixes: 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW")
Link: https://lore.kernel.org/lkml/20230703175048.151683-1-jthinz@mailbox.tu-berlin.de/
Link: https://lore.kernel.org/netdev/0d7cddc9-03fa-43db-a579-14f3e822615b@app.fastmail.com/
Signed-off-by: Jörn-Thorben Hinz <jthinz@mailbox.tu-berlin.de>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This way GPIO will be denied on pins already claimed by other devices
and basic pin configuration (pull-up, pull-down etc.) can be done
through the userspace GPIO API.
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.8
The third "new features" pull request for v6.8. This is a smaller one
to clear up our tree before the break and nothing really noteworthy
this time.
Major changes:
stack
* cfg80211: introduce cfg80211_ssid_eq() for SSID matching
* cfg80211: support P2P operation on DFS channels
* mac80211: allow 64-bit radiotap timestamps
iwlwifi
* AX210: allow concurrent P2P operation on DFS channels
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux into thermal
Merge thermal control material for 6.8-rc1 from Daniel Lezcano:
"- Converted Mediatek Thermal to the json-schema (Rafał Miłecki)
- Fixed DT bindings issue on Loongson (Binbin Zhou)
- Fixed returning NULL instead of -ENODEV on Loogsoo (Binbin Zhou)
- Added the DT binding for the tsens on SM8650 platform (Neil Armstrong)
- Added a reboot on critical option feature (Fabio Estevam)
- Made usage of DEFINE_SIMPLE_DEV_PM_OPS on AmLogic (Uwe Kleine-König)
- Added the D1/T113s THS controller support on Sun8i (Maxim Kiselev)
- Fixed example in the DT binding for QCom SPMI (Johan Hovold)
- Fixed compilation warning for the tmon utility (Florian Eckert)
- Added interrupt based configuration on Exynos along with a set of
related cleanups (Mateusz Majewski)"
* tag 'thermal-v6.8-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (24 commits)
thermal/drivers/exynos: Use set_trips ops
thermal/drivers/exynos: Use BIT wherever possible
thermal/drivers/exynos: Split initialization of TMU and the thermal zone
thermal/drivers/exynos: Stop using the threshold mechanism on Exynos 4210
thermal/drivers/exynos: Simplify regulator (de)initialization
thermal/drivers/exynos: Handle devm_regulator_get_optional return value correctly
thermal/drivers/exynos: Wwitch from workqueue-driven interrupt handling to threaded interrupts
thermal/drivers/exynos: Drop id field
thermal/drivers/exynos: Remove an unnecessary field description
tools/thermal/tmon: Fix compilation warning for wrong format
dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Clean up examples
dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Fix example node names
thermal/drivers/sun8i: Add D1/T113s THS controller support
dt-bindings: thermal: sun8i: Add binding for D1/T113s THS controller
thermal: amlogic: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
thermal: amlogic: Make amlogic_thermal_disable() return void
thermal/thermal_of: Allow rebooting after critical temp
reboot: Introduce thermal_zone_device_critical_reboot()
thermal/core: Prepare for introduction of thermal reboot
dt-bindings: thermal-zones: Document critical-action
...
|
|
Jamal Hadi Salim says:
====================
net/sched: retire tc ipt action
In keeping up with my status as a hero who removes code: another one bites the
dust.
The tc ipt action was intended to run all netfilter/iptables target.
Unfortunately it has not benefitted over the years from proper updates when
netfilter changes, and for that reason it has remained rudimentary.
Pinging a bunch of people that i was aware were using this indicates that
removing it wont affect them.
Retire it to reduce maintenance efforts.
So Long, ipt, and Thanks for all the Fish.
====================
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that we are retiring the IPT action.
Reviewed-by: Victor Noguiera <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The tc ipt action was intended to run all netfilter/iptables target.
Unfortunately it has not benefitted over the years from proper updates when
netfilter changes, and for that reason it has remained rudimentary.
Pinging a bunch of people that i was aware were using this indicates that
removing it wont affect them.
Retire it to reduce maintenance efforts. Buh-bye.
Reviewed-by: Victor Noguiera <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The latest platforms use a different SMU message port(0x938) from the one
currently being used (0x538). Make code changes to adapt to this new
information.
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231228102104.1785383-7-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
AMD newer platforms, (AMDI000A or family 1Ah series) also supports the STB
functionality. Add this to amd_pmc_is_stb_supported().
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231228102104.1785383-6-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Idlemask is an indication of each IP block current state (i.e. whether it
is running or idle) during s2idle transistion. The newer 1Ah family
supports this feature, add it to the support list.
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231228102104.1785383-5-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
In the current code, amd_pmc_get_ip_info() is being called from
amd_pmc_s2d_init() and that code block gets enabled only when the STB is
being enabled.
But the information from amd_pmc_get_ip_info() will be required outside of
STB usecase. Hence move this call into driver probe sequence.
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231228102104.1785383-4-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Latest AMD SoCs has VPE (Video Processing Engine) IP block and the
statistics related to this IP can be obtained as a part of metrics table
information that the PMFW propogates. Add this support for 1Ah family
series.
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231228102104.1785383-3-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
To initiate the HW deep state transistion the OS_HINT command has to be
sent the PMFW. Add this support to the platforms that has AMDI000A
support.
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231228102104.1785383-2-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
dev->gso_partial_features is read from tx fast path for GSO packets.
Move it to appropriate section to avoid a cache line miss.
Fixes: 43a71cd66b9c ("net-device: reorganize net_device fast path variables")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no need to have an intermediate functions as DEFINE_RES_*()
macros are represented by compound literals. Just use them in place.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Return a status code without storing it in an intermediate variable.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/0d0c4876-37d7-4bee-912e-56324495454f@web.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
apmf_sbios_heartbeat_notify()
The kfree() function was called in one case by
the apmf_sbios_heartbeat_notify() function during error handling
even if the passed variable contained a null pointer.
This issue was detected by using the Coccinelle software.
* Thus return directly after a call of the function “apmf_if_call” failed
at the beginning.
* Delete the label “out” which became unnecessary with this refactoring.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/362ee824-fc53-4e19-9529-8b621657635b@web.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Remove the "private:" comment to prevent the kernel-doc warning:
include/linux/wmi.h:27: warning: Excess struct member 'setable' description in 'wmi_device'
Either a struct member is documented (via kernel-doc) or it's private,
but not both.
Fixes: b4cc979588ee ("platform/x86: wmi: Add kernel doc comments")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Armin Wolf <W_Armin@gmx.de>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231223194321.23084-1-rdunlap@infradead.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add missing extern for tgl_h_reg_map. Fixes sparse warning:
drivers/platform/x86/intel/pmc/tgl.c:213:26: warning: symbol 'tgl_h_reg_map' was not declared. Should it be static?
Fixes: 544f7b7f651c ("platform/x86/intel/pmc: Add regmap for Tiger Lake H PCH")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-9-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add the GBE LTR ignore suspend time fix for Lunar Lake.
Fixes: 119652b855e6 ("platform/x86/intel/pmc: Add Lunar Lake M support to intel_pmc_core driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-8-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add the GBE LTR ignore suspend time fix for Arrow Lake.
Fixes: f34dcf397286 ("platform/x86/intel/pmc: Add Arrow Lake S support to intel_pmc_core driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-7-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Merge the 'platform-drivers-x86-v6.7-6' fixes into pdx86/for-next
so that the "Intel PMC GBE LTR regression" fixes can also be
applied to the new Arrow Lake and Lunar Lake platform support
code in pdx86/for-next .
|
|
Correct all kernel-doc notation on pvr_device.h so that there are no
kernel-doc warnings remaining.
pvr_device.h:292: warning: Excess struct member 'active' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'idle' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'lock' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'work' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'old_kccb_cmds_executed' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'kccb_stall_count' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'ccb' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'rtn_q' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'rtn_obj' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'rtn' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'slot_count' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'reserved_count' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'waiters' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'fence_ctx' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'id' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'seqno' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'lock' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'active' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'idle' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'lock' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'work' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'old_kccb_cmds_executed' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'kccb_stall_count' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'ccb' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'rtn_q' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'rtn_obj' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'rtn' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'slot_count' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'reserved_count' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'waiters' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'fence_ctx' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'id' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'seqno' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'lock' description in 'pvr_device'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Frank Binns <frank.binns@imgtec.com>
Cc: Donald Robson <donald.robson@imgtec.com>
Cc: Matt Coster <matt.coster@imgtec.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231231054910.31805-1-rdunlap@infradead.org
|
|
Update kernel-doc comments in <drm/drm_gpuvm.h> to correct all
kernel-doc warnings:
drm_gpuvm.h:148: warning: Excess struct member 'addr' description in 'drm_gpuva'
drm_gpuvm.h:148: warning: Excess struct member 'offset' description in 'drm_gpuva'
drm_gpuvm.h:148: warning: Excess struct member 'obj' description in 'drm_gpuva'
drm_gpuvm.h:148: warning: Excess struct member 'entry' description in 'drm_gpuva'
drm_gpuvm.h:148: warning: Excess struct member '__subtree_last' description in 'drm_gpuva'
drm_gpuvm.h:192: warning: No description found for return value of 'drm_gpuva_invalidated'
drm_gpuvm.h:331: warning: Excess struct member 'tree' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'list' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'list' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'local_list' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'lock' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'list' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'local_list' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'lock' description in 'drm_gpuvm'
drm_gpuvm.h:352: warning: No description found for return value of 'drm_gpuvm_get'
drm_gpuvm.h:545: warning: Excess struct member 'fn' description in 'drm_gpuvm_exec'
drm_gpuvm.h:545: warning: Excess struct member 'priv' description in 'drm_gpuvm_exec'
drm_gpuvm.h:597: warning: missing initial short description on line:
* drm_gpuvm_exec_resv_add_fence()
drm_gpuvm.h:616: warning: missing initial short description on line:
* drm_gpuvm_exec_validate()
drm_gpuvm.h:623: warning: No description found for return value of 'drm_gpuvm_exec_validate'
drm_gpuvm.h:698: warning: Excess struct member 'gpuva' description in 'drm_gpuvm_bo'
drm_gpuvm.h:698: warning: Excess struct member 'entry' description in 'drm_gpuvm_bo'
drm_gpuvm.h:698: warning: Excess struct member 'gem' description in 'drm_gpuvm_bo'
drm_gpuvm.h:698: warning: Excess struct member 'evict' description in 'drm_gpuvm_bo'
drm_gpuvm.h:726: warning: No description found for return value of 'drm_gpuvm_bo_get'
drm_gpuvm.h:738: warning: missing initial short description on line:
* drm_gpuvm_bo_gem_evict()
drm_gpuvm.h:740: warning: missing initial short description on line:
* drm_gpuvm_bo_gem_evict()
drm_gpuvm.h:698: warning: Excess struct member 'evict' description in 'drm_gpuvm_bo'
drm_gpuvm.h:844: warning: Excess struct member 'addr' description in 'drm_gpuva_op_map'
drm_gpuvm.h:844: warning: Excess struct member 'range' description in 'drm_gpuva_op_map'
drm_gpuvm.h:844: warning: Excess struct member 'offset' description in 'drm_gpuva_op_map'
drm_gpuvm.h:844: warning: Excess struct member 'obj' description in 'drm_gpuva_op_map'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231231054856.31786-1-rdunlap@infradead.org
|
|
ILI2901 requires reset to pull down time greater than 10ms,
so the configuration post_power_delay_ms is 10, and the chipset
initial time is required to be greater than 100ms,
so the post_gpio_reset_on_delay_ms is set to 100.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Ilitek ili2901 touch screen chip same as Elan eKTH6915 controller
has a reset gpio. The difference is that they have different
post_power_delay_ms and post_gpio_reset_on_delay_ms.
Ilitek ili2901 also uses 3.3V power supply.
Signed-off-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The struct bus_type pointer in hid_bpf_ops just passes the pointer to
the driver core, and the driver core can handle, and expects, a constant
pointer, so also make the pointer constant in hid_bpf_ops.
Part of the process of moving all usages of struct bus_type to be
constant to move them all to read-only memory.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the ishtp_cl_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the hid_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|