| Age | Commit message (Collapse) | Author |
|---|
|
Use the vma iterator so that the iterator can be invalidated or updated to
avoid each caller doing so.
Link: https://lkml.kernel.org/r/20230120162650.984577-17-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The shm already has the vma iterator in position for a write.
do_vmi_munmap() searches for the correct position and aligns the write, so
it is not the right function to use in this case.
The shm VMA tree modification is similar to the brk munmap situation, the
vma iterator is in position and the VMA is already known. This patch
generalizes the brk munmap function do_brk_munmap() to be used for any
other callers with the vma iterator already in position to munmap a VMA.
Link: https://lkml.kernel.org/r/20230126212049.980501-1-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Link: https://lore.kernel.org/linux-mm/yt9dh6wec21a.fsf@linux.ibm.com/
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pass through the vma iterator to do_vmi_munmap() to handle the iterator
state internally
Link: https://lkml.kernel.org/r/20230120162650.984577-16-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
__split_vma()
These wrappers are short-lived in this patch set so that each user can be
converted on its own. In the end, these functions are renamed in one
commit.
Link: https://lkml.kernel.org/r/20230120162650.984577-15-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the vma iterator instead of the maple state for type safety and for
consistency through the mm code.
Link: https://lkml.kernel.org/r/20230120162650.984577-14-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Start passing the vma iterator through the mm code. This will allow for
reuse of the state and cleaner invalidation if necessary.
Link: https://lkml.kernel.org/r/20230120162650.984577-13-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In preparation of passing the vma state through split, the pre-allocation
that occurs before the split has to be moved to after. Since the
preallocation would then live right next to the store, just call store
instead of preallocating. This effectively restores the potential error
path of splitting and not munmap'ing which pre-dates the maple tree.
Link: https://lkml.kernel.org/r/20230120162650.984577-12-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Avoid using the maple tree interface directly.
Link: https://lkml.kernel.org/r/20230120162650.984577-11-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Avoid using the maple tree interface directly. This gains type safety.
Link: https://lkml.kernel.org/r/20230120162650.984577-10-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the vma iterator API for the brk() system call. This will provide
type safety at compile time.
Link: https://lkml.kernel.org/r/20230120162650.984577-9-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add wrappers for the maple tree to the vma iterator. This will provide
type safety at compile time.
Link: https://lkml.kernel.org/r/20230120162650.984577-8-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When mas_prev() does not find anything, set the state to MAS_NONE.
Handle the MAS_NONE in mas_find() like a MAS_START.
Link: https://lkml.kernel.org/r/20230120162650.984577-7-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: <syzbot+502859d610c661e56545@syzkaller.appspotmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If an invalidated maple state is encountered during write, reset the maple
state to MAS_START. This will result in a re-walk of the tree to the
correct location for the write.
Link: https://lore.kernel.org/all/20230107020126.1627-1-sj@kernel.org/
Link: https://lkml.kernel.org/r/20230120162650.984577-6-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a testcase to ensure the iterator detects bad states on modifications
and does what the user expects
Link: https://lkml.kernel.org/r/20230120162650.984577-5-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When iterating, a user may operate on the tree and cause the maple state
to be altered and left in an unintuitive state. Detect this scenario and
correct it by setting to the limit and invalidating the state.
Link: https://lkml.kernel.org/r/20230120162650.984577-4-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Ensure the node isn't dead after reading the node end.
Link: https://lkml.kernel.org/r/20230120162650.984577-3-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "VMA tree type safety and remove __vma_adjust()", v4.
This patchset does two things: 1. Clean up, including removal of
__vma_adjust() and 2. Extends the VMA iterator API to provide type safety
to the VMA operations using the maple tree, as requested by Linus [1].
It also addresses another issue of usability brought up by Linus about
needing to modify the maple state within the loops. The maple state has
been replaced by the VMA iterator and the iterator is now modified within
the MM code so the caller should not need to worry about doing the work
themselves when tree modifications occur.
This brought up a potential inconsistency of the iterator state and what
the user expects, so the inconsistency is addressed to keep the VMA
iterator safe for use after the looping over a VMA range. This is
addressed in patch 3 ("maple_tree: Reduce user error potential") and 4
("test_maple_tree: Test modifications while iterating").
While cleaning up the state, the duplicate locking code in mm/mmap.c
introduced by the maple tree has been address by abstracting it to two
functions: vma_prepare() and vma_complete(). These abstractions allowed
for a much simpler __vma_adjust(), which eventually leads to the removal
of the __vma_adjust() function by placing the logic into the vma_merge()
function itself.
1. https://lore.kernel.org/linux-mm/CAHk-=wg9WQXBGkNdKD2bqocnN73rDswuWsavBB7T-tekykEn_A@mail.gmail.com/
This patch (of 49):
Add a function that will zero out the maple state struct and set some
basic defaults.
Link: https://lkml.kernel.org/r/20230120162650.984577-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20230120162650.984577-2-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If we have a HIGHMEM system with a large folio, 'offset' may be larger
than PAGE_SIZE, and so min_t will cap at 'len' instead of the intended
end-of-page. That can overflow into the next page which is likely to be
unmapped and fault, but could theoretically copy the wrong data.
Link: https://lkml.kernel.org/r/Y919vmSrtAgsf6K3@casper.infradead.org
Fixes: 00cdf76012ab ("mm: add memcpy_from_file_folio()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: "Fabio M. De Francesco" <fmdefrancesco@gmail.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We're masking with the number of type bits instead of the type mask, which
is obviously wrong.
Link: https://lkml.kernel.org/r/39fd91e3-c93b-23c6-afc6-cbe473bb0ca9@redhat.com
Fixes: 20aae9eff5ac ("arm/mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Fix kmemleak crashes when scanning CMA regions", v2.
When trying to boot a device with an ARM64 kernel with the following
config options enabled:
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT=y
CONFIG_DEBUG_KMEMLEAK=y
a crash is encountered when kmemleak starts to scan the list of gray
or allocated objects that it maintains. Upon closer inspection, it was
observed that these page-faults always occurred when kmemleak attempted
to scan a CMA region.
At the moment, kmemleak is made aware of CMA regions that are specified
through the devicetree to be dynamically allocated within a range of
addresses. However, kmemleak should not need to scan CMA regions or any
reserved memory region, as those regions can be used for DMA transfers
between drivers and peripherals, and thus wouldn't contain anything
useful for kmemleak.
Additionally, since CMA regions are unmapped from the kernel's address
space when they are freed to the buddy allocator at boot when
CONFIG_DEBUG_PAGEALLOC is enabled, kmemleak shouldn't attempt to access
those memory regions, as that will trigger a crash. Thus, kmemleak
should ignore all dynamically allocated reserved memory regions.
This patch (of 1):
Currently, kmemleak ignores dynamically allocated reserved memory regions
that don't have a kernel mapping. However, regions that do retain a
kernel mapping (e.g. CMA regions) do get scanned by kmemleak.
This is not ideal for two reasons:
1 kmemleak works by scanning memory regions for pointers to allocated
objects to determine if those objects have been leaked or not.
However, reserved memory regions can be used between drivers and
peripherals for DMA transfers, and thus, would not contain pointers to
allocated objects, making it unnecessary for kmemleak to scan these
reserved memory regions.
2 When CONFIG_DEBUG_PAGEALLOC is enabled, along with kmemleak, the
CMA reserved memory regions are unmapped from the kernel's address
space when they are freed to buddy at boot. These CMA reserved regions
are still tracked by kmemleak, however, and when kmemleak attempts to
scan them, a crash will happen, as accessing the CMA region will result
in a page-fault, since the regions are unmapped.
Thus, use kmemleak_ignore_phys() for all dynamically allocated reserved
memory regions, instead of those that do not have a kernel mapping
associated with them.
Link: https://lkml.kernel.org/r/20230208232001.2052777-1-isaacmanjarres@google.com
Link: https://lkml.kernel.org/r/20230208232001.2052777-2-isaacmanjarres@google.com
Fixes: a7259df76702 ("memblock: make memblock_find_in_range method private")
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Kirill A. Shutemov <kirill.shtuemov@linux.intel.com>
Cc: Nick Kossifidis <mick@ics.forth.gr>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Saravana Kannan <saravanak@google.com>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When printing the name of the current process, it will report an error:
(gdb) p $lx_current().comm Python Exception <class 'gdb.error'> No symbol
"current_task" in current context.: Error occurred in Python: No symbol
"current_task" in current context.
Because e57ef2ed97c1 ("x86: Put hot per CPU variables into a struct")
changed it.
Link: https://lkml.kernel.org/r/20230204090139.1789264-1-xiehuan09@gmail.com
Fixes: e57ef2ed97c1 ("x86: Put hot per CPU variables into a struct")
Signed-off-by: Jeff Xie <xiehuan09@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Memory will be allocated to store substring_t in match_strdup(), which
means the caller of match_strdup() may need to be scheduled out to wait
for reclaiming memory. smatch complains that this can cuase sleeping in
an atoic context.
Using local array to store substring_t to remove the restriction.
Link: https://lkml.kernel.org/r/20230120032352.242767-1-lilingfeng3@huawei.com
Link: https://lore.kernel.org/all/20221104023938.2346986-5-yukuai1@huaweicloud.com/
Link: https://lkml.kernel.org/r/20230120032352.242767-1-lilingfeng3@huawei.com
Fixes: 2c0647988433 ("blk-iocost: don't release 'ioc->lock' while updating params")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reported-by: Yu Kuai <yukuai1@huaweicloud.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: BingJing Chang <bingjingc@synology.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Hou Tao <houtao1@huawei.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: yangerkun <yangerkun@huawei.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The debugfs_remove_recursive() is invoked by unregister_shrinker(), which
is holding the write lock of shrinker_rwsem. It will waits for the
handler of debugfs file complete. The handler also needs to hold the read
lock of shrinker_rwsem to do something. So it may cause the following
deadlock:
CPU0 CPU1
debugfs_file_get()
shrinker_debugfs_count_show()/shrinker_debugfs_scan_write()
unregister_shrinker()
--> down_write(&shrinker_rwsem);
debugfs_remove_recursive()
// wait for (A)
--> wait_for_completion();
// wait for (B)
--> down_read_killable(&shrinker_rwsem)
debugfs_file_put() -- (A)
up_write() -- (B)
The down_read_killable() can be killed, so that the above deadlock can be
recovered. But it still requires an extra kill action, otherwise it will
block all subsequent shrinker-related operations, so it's better to fix
it.
[akpm@linux-foundation.org: fix CONFIG_SHRINKER_DEBUG=n stub]
Link: https://lkml.kernel.org/r/20230202105612.64641-1-zhengqi.arch@bytedance.com
Fixes: 5035ebc644ae ("mm: shrinkers: introduce debugfs interface for memory shrinkers")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the kernel copies a page from ksm_might_need_to_copy(), but runs into
an uncorrectable error, it will crash since poisoned page is consumed by
kernel, this is similar to the issue recently fixed by Copy-on-write
poison recovery.
When an error is detected during the page copy, return VM_FAULT_HWPOISON
in do_swap_page(), and install a hwpoison entry in unuse_pte() when
swapoff, which help us to avoid system crash. Note, memory failure on a
KSM page will be skipped, but still call memory_failure_queue() to be
consistent with general memory failure process, and we could support KSM
page recovery in the feature.
[wangkefeng.wang@huawei.com: enhance unuse_pte(), fix issue found by lkp]
Link: https://lkml.kernel.org/r/20221213120523.141588-1-wangkefeng.wang@huawei.com
[wangkefeng.wang@huawei.com: update changelog, alter ksm_might_need_to_copy(), restore unlikely() in unuse_pte()]
Link: https://lkml.kernel.org/r/20230201074433.96641-1-wangkefeng.wang@huawei.com
Link: https://lkml.kernel.org/r/20221209072801.193221-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On powerpc64, you can build a kernel with KASAN as soon as you build it
with RADIX MMU support. However if the CPU doesn't have RADIX MMU, KASAN
isn't enabled at init and the following Oops is encountered.
[ 0.000000][ T0] KASAN not enabled as it requires radix!
[ 4.484295][ T26] BUG: Unable to handle kernel data access at 0xc00e000000804a04
[ 4.485270][ T26] Faulting instruction address: 0xc00000000062ec6c
[ 4.485748][ T26] Oops: Kernel access of bad area, sig: 11 [#1]
[ 4.485920][ T26] BE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
[ 4.486259][ T26] Modules linked in:
[ 4.486637][ T26] CPU: 0 PID: 26 Comm: kworker/u2:2 Not tainted 6.2.0-rc3-02590-gf8a023b0a805 #249
[ 4.486907][ T26] Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1200 0xf000005 of:SLOF,HEAD pSeries
[ 4.487445][ T26] Workqueue: eval_map_wq .tracer_init_tracefs_work_func
[ 4.488744][ T26] NIP: c00000000062ec6c LR: c00000000062bb84 CTR: c0000000002ebcd0
[ 4.488867][ T26] REGS: c0000000049175c0 TRAP: 0380 Not tainted (6.2.0-rc3-02590-gf8a023b0a805)
[ 4.489028][ T26] MSR: 8000000002009032 <SF,VEC,EE,ME,IR,DR,RI> CR: 44002808 XER: 00000000
[ 4.489584][ T26] CFAR: c00000000062bb80 IRQMASK: 0
[ 4.489584][ T26] GPR00: c0000000005624d4 c000000004917860 c000000001cfc000 1800000000804a04
[ 4.489584][ T26] GPR04: c0000000003a2650 0000000000000cc0 c00000000000d3d8 c00000000000d3d8
[ 4.489584][ T26] GPR08: c0000000049175b0 a80e000000000000 0000000000000000 0000000017d78400
[ 4.489584][ T26] GPR12: 0000000044002204 c000000003790000 c00000000435003c c0000000043f1c40
[ 4.489584][ T26] GPR16: c0000000043f1c68 c0000000043501a0 c000000002106138 c0000000043f1c08
[ 4.489584][ T26] GPR20: c0000000043f1c10 c0000000043f1c20 c000000004146c40 c000000002fdb7f8
[ 4.489584][ T26] GPR24: c000000002fdb834 c000000003685e00 c000000004025030 c000000003522e90
[ 4.489584][ T26] GPR28: 0000000000000cc0 c0000000003a2650 c000000004025020 c000000004025020
[ 4.491201][ T26] NIP [c00000000062ec6c] .kasan_byte_accessible+0xc/0x20
[ 4.491430][ T26] LR [c00000000062bb84] .__kasan_check_byte+0x24/0x90
[ 4.491767][ T26] Call Trace:
[ 4.491941][ T26] [c000000004917860] [c00000000062ae70] .__kasan_kmalloc+0xc0/0x110 (unreliable)
[ 4.492270][ T26] [c0000000049178f0] [c0000000005624d4] .krealloc+0x54/0x1c0
[ 4.492453][ T26] [c000000004917990] [c0000000003a2650] .create_trace_option_files+0x280/0x530
[ 4.492613][ T26] [c000000004917a90] [c000000002050d90] .tracer_init_tracefs_work_func+0x274/0x2c0
[ 4.492771][ T26] [c000000004917b40] [c0000000001f9948] .process_one_work+0x578/0x9f0
[ 4.492927][ T26] [c000000004917c30] [c0000000001f9ebc] .worker_thread+0xfc/0x950
[ 4.493084][ T26] [c000000004917d60] [c00000000020be84] .kthread+0x1a4/0x1b0
[ 4.493232][ T26] [c000000004917e10] [c00000000000d3d8] .ret_from_kernel_thread+0x58/0x60
[ 4.495642][ T26] Code: 60000000 7cc802a6 38a00000 4bfffc78 60000000 7cc802a6 38a00001 4bfffc68 60000000 3d20a80e 7863e8c2 792907c6 <7c6348ae> 20630007 78630fe0 68630001
[ 4.496704][ T26] ---[ end trace 0000000000000000 ]---
The Oops is due to kasan_byte_accessible() not checking the readiness of
KASAN. Add missing call to kasan_arch_is_ready() and bail out when not
ready. The same problem is observed with ____kasan_kfree_large() so fix
it the same.
Also, as KASAN is not available and no shadow area is allocated for linear
memory mapping, there is no point in allocating shadow mem for vmalloc
memory as shown below in /sys/kernel/debug/kernel_page_tables
---[ kasan shadow mem start ]---
0xc00f000000000000-0xc00f00000006ffff 0x00000000040f0000 448K r w pte valid present dirty accessed
0xc00f000000860000-0xc00f00000086ffff 0x000000000ac10000 64K r w pte valid present dirty accessed
0xc00f3ffffffe0000-0xc00f3fffffffffff 0x0000000004d10000 128K r w pte valid present dirty accessed
---[ kasan shadow mem end ]---
So, also verify KASAN readiness before allocating and poisoning
shadow mem for VMAs.
Link: https://lkml.kernel.org/r/150768c55722311699fdcf8f5379e8256749f47d.1674716617.git.christophe.leroy@csgroup.eu
Fixes: 41b7a347bf14 ("powerpc: Book3S 64-bit outline-only KASAN support")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reported-by: Nathan Lynch <nathanl@linux.ibm.com>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org> [5.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This fix was nacked by Philip, for reasons identified in the email linked
below.
Link: https://lkml.kernel.org/r/68f15d67-8945-2728-1f17-5b53a80ec52d@squashfs.org.uk
Fixes: 72e544b1b28325 ("squashfs: harden sanity check in squashfs_read_xattr_id_table")
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Fedor Pchelkin <pchelkin@ispras.ru>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The copy_mc_to_kernel() will return 0 if it executed successfully. Then
the return value should be set to the length it copied.
[akpm@linux-foundation.org: don't mess up `ret', per Matthew]
Link: https://lkml.kernel.org/r/1675341227-14-1-git-send-email-ruansy.fnst@fujitsu.com
Fixes: d984648e428b ("fsdax,xfs: port unshare to fsdax")
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If we call folio_isolate_lru() successfully, we will get return value 0.
We need to add this folio to the movable_pages_list.
Link: https://lkml.kernel.org/r/20230131063206.28820-1-Kuan-Ying.Lee@mediatek.com
Fixes: 67e139b02d99 ("mm/gup.c: refactor check_and_migrate_movable_pages()")
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Andrew Yang <andrew.yang@mediatek.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit e4a0d3e720e7 ("aio: Make it possible to remap aio ring") introduced
a null-deref if mremap is called on an old aio mapping after fork as
mm->ioctx_table will be set to NULL.
[jmoyer@redhat.com: fix 80 column issue]
Link: https://lkml.kernel.org/r/x49sffq4nvg.fsf@segfault.boston.devel.redhat.com
Fixes: e4a0d3e720e7 ("aio: Make it possible to remap aio ring")
Signed-off-by: Seth Jenkins <sethjenkins@google.com>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Jann Horn <jannh@google.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
My old email <alexander.mikhalitsyn@virtuozzo.com> isn't working
anymore.
Link: https://lkml.kernel.org/r/20230131123456.192657-1-aleksandr.mikhalitsyn@canonical.com
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After x86 enabled support for KMSAN, it has become possible to have larger
'struct page' than was expected when commit 5470dea49f53 ("mm: use
mm_zero_struct_page from SPARC on all 64b architectures") was merged:
include/linux/mm.h:156:10: warning: no case matching constant switch condition '96'
switch (sizeof(struct page)) {
Extend the maximum accordingly.
Link: https://lkml.kernel.org/r/20230130130739.563628-1-arnd@kernel.org
Fixes: 5470dea49f53 ("mm: use mm_zero_struct_page from SPARC on all 64b architectures")
Fixes: 4ca8cc8d1bbe ("x86: kmsan: enable KMSAN builds for x86")
Fixes: f80be4571b19 ("kmsan: add KMSAN runtime core")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This is just a conversion to the folio API. While there are some nods
towards supporting multi-page folios in here, the blocks array is still
sized for one page's worth of blocks, and there are other assumptions such
as the blocks_per_page variable.
[willy@infradead.org: fix accidentally-triggering WARN_ON_ONCE]
Link: https://lkml.kernel.org/r/Y9kuaBgXf9lKJ8b0@casper.infradead.org
Link: https://lkml.kernel.org/r/20230126201255.1681189-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Convert writepage_t to use a folio".
More folioisation. I split out the mpage work from everything else
because it completely dominated the patch, but some implementations I just
converted outright.
This patch (of 2):
We always write back an entire folio, but that's currently passed as the
head page. Convert all filesystems that use write_cache_pages() to expect
a folio instead of a page.
Link: https://lkml.kernel.org/r/20230126201255.1681189-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230126201255.1681189-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This is the equivalent of memcpy_from_page(). It differs in that it takes
the position in a file instead of offset in a folio, it accepts the total
number of bytes to be copied (instead of the number of bytes to be copied
from this folio) and it returns how many bytes were copied from the folio,
rather than making the caller calculate that and then checking if the
caller got it right.
[akpm@linux-foundation.org: fix typo in comment]
Link: https://lkml.kernel.org/r/20230126201552.1681588-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: "Fabio M. De Francesco" <fmdefrancesco@gmail.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The ->rw_page method is a special purpose bypass of the usual bio handling
path that is limited to single-page reads and writes and synchronous which
causes a lot of extra code in the drivers, callers and the block layer.
The only remaining user is the MM swap code. Switch that swap code to
simply submit a single-vec on-stack bio an synchronously wait on it based
on a newly added QUEUE_FLAG_SYNCHRONOUS flag set by the drivers that
currently implement ->rw_page instead. While this touches one extra cache
line and executes extra code, it simplifies the block layer and drivers
and ensures that all feastures are properly supported by all drivers, e.g.
right now ->rw_page bypassed cgroup writeback entirely.
[akpm@linux-foundation.org: fix comment typo, per Dan]
Link: https://lkml.kernel.org/r/20230125133436.447864-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Split the block device case from swap_readpage into a separate helper,
following the abstraction for file based swap.
Link: https://lkml.kernel.org/r/20230125133436.447864-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
__swap_writepage always returns 0.
Link: https://lkml.kernel.org/r/20230125133436.447864-6-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Optimize the synchronous swap in case by using an on-stack bio instead of
allocating one using bio_alloc.
Link: https://lkml.kernel.org/r/20230125133436.447864-5-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Split the block device case from swap_readpage into a separate helper,
following the abstraction for file based swap and frontswap.
Link: https://lkml.kernel.org/r/20230125133436.447864-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
swap_readpage always returns 0, and no caller checks the return value.
[akpm@linux-foundation.org: fix void-returning swap_readpage() stub, per Keith]
Link: https://lkml.kernel.org/r/20230125133436.447864-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "remove ->rw_page".
This series removes the ->rw_page block_device_operation, which is an old
and clumsy attempt at a simple read/write fast path for the block layer.
It isn't actually used by the fastest block layer operations that we
support (polled I/O through io_uring), but only used by the mpage buffered
I/O helpers which are some of the slowest I/O we have and do not make any
difference there at all, and zram which is a block device abused to
duplicate the zram functionality.
Given that zram is heavily used we need to make sure there is a good
replacement for synchronous I/O, so this series adds a new flag for
drivers that complete I/O synchronously and uses that flag to use on-stack
bios and synchronous submission for them in the swap code.
This patch (of 7):
These are micro-optimizations for synchronous I/O, which do not matter
compared to all the other inefficiencies in the legacy buffer_head based
mpage code.
Link: https://lkml.kernel.org/r/20230125133436.447864-1-hch@lst.de
Link: https://lkml.kernel.org/r/20230125133436.447864-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move the VM_FLUSH_RESET_PERMS to the caller and rename the function to
better describe what it is doing.
Link: https://lkml.kernel.org/r/20230121071051.1143058-11-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
vunmap only needs to find and free the vmap_area and vm_strut, so open
code that there and merge the rest of the code into vfree.
Link: https://lkml.kernel.org/r/20230121071051.1143058-10-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All these checks apply to the free_vm_area interface as well, so move them
to the common routine.
Link: https://lkml.kernel.org/r/20230121071051.1143058-9-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the common helper to find and remove a vmap_area instead of open
coding it.
Link: https://lkml.kernel.org/r/20230121071051.1143058-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
__remove_vm_area is the only part of va_remove_mappings that requires a
vmap_area. Move the call out to the caller and only pass the vm_struct to
va_remove_mappings.
Link: https://lkml.kernel.org/r/20230121071051.1143058-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This adds an extra, never taken, in_interrupt() branch, but will allow to
cut down the maze of vfree helpers.
Link: https://lkml.kernel.org/r/20230121071051.1143058-6-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move these two functions around a bit to avoid forward declarations.
Link: https://lkml.kernel.org/r/20230121071051.1143058-5-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fold __vfree_deferred into vfree_atomic, and call vfree_atomic early on
from vfree if called from interrupt context so that the extra low-level
helper can be avoided.
Link: https://lkml.kernel.org/r/20230121071051.1143058-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
__vfree is a subset of vfree that just skips a few checks, and which is
only used by vfree and an error cleanup path. Fold __vfree into vfree and
switch the only other caller to call vfree() instead.
Link: https://lkml.kernel.org/r/20230121071051.1143058-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
