summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-05-05PCI/PM: Write 0 to PMCSR in pci_power_up() in all casesRafael J. Wysocki
Make pci_power_up() write 0 to the device's PCI_PM_CTRL register in order to put it into D0 regardless of the power state returned by the previous read from that register which should not matter. Link: https://lore.kernel.org/r/5748066.MhkbZ0Pkbq@kreacher Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-05-05PCI/PM: Do not call pci_update_current_state() from pci_power_up()Rafael J. Wysocki
Notice that calling pci_update_current_state() from pci_power_up() is redundant and may be harmful in some cases. First, if the device is in a low-power state before pci_power_up() gets called for it and platform_pci_set_power_state() successfully changes its power state to D0, pci_update_current_state() will update current_state to reflect that and pci_power_up() will return success right away without restoring the device's BARs or reconfiguring ASPM which may be necessary. This is arguably incorrect and definitely inconsistent with the case when platform_pci_set_power_state() returns an error (for example, because the device is not power-manageable by the platform firmware). Second, current_state should not be overwritten until the decision whether or not to restore the device's BARs is made, because that decision generally depends on its value. Again, calling pci_update_current_state() in pci_power_up() is not consistent with this observation. Next, pci_power_up() attempts to read from the device's PCI_PM_CTRL register regardless of the current_state value unless it is PCI_D0, including the case when pci_update_current_state() sets current_state to PCI_D3cold to indicate that the device is not accessible. If the register read is not successful, current_state will be set to PCI_D3cold anyway, so that pci_update_current_state() action is redundant. Further, if pci_update_current_state() reads the device's PCI_PM_CTRL register, pci_power_up() will repeat that read going forward and it is not necessary to update current_state in the meantime. Finally, if pm_cap is not set (in which case the PCI_PM_CTRL register is not present), the power state of the device should be determined with the help of the platform firmware or set to D0 if that's not possible and pci_update_current_state() does not do that. Accordingly, rearrange pci_power_up() so as to address the above shortcomings. Link: https://lore.kernel.org/r/3695055.kQq0lBPeGt@kreacher Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-05-05PCI/PM: Unfold pci_platform_power_transition() in pci_power_up()Rafael J. Wysocki
Some actions carried out by pci_platform_power_transition(() in pci_power_up() are redundant, but before dealing with them, make pci_power_up() call the pci_platform_power_transition() code directly (and avoid a redundant check when pm_cap is unset while at it). Link: https://lore.kernel.org/r/1922486.PYKUYFuaPT@kreacher Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-05-05PCI/PM: Set current_state to D3cold if the device is not accessibleRafael J. Wysocki
Make pci_power_up() and pci_set_low_power_state() change current_state to PCI_D3cold when the device is not accessible along the lines of pci_update_current_state(). Link: https://lore.kernel.org/r/10104376.nUPlyArG6x@kreacher Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-05-05PCI/PM: Relocate pci_set_low_power_state()Rafael J. Wysocki
Because pci_set_power_state() is the only caller of pci_set_low_power_state(), put the latter next to the former. No functional impact. Link: https://lore.kernel.org/r/3202976.44csPzL39Z@kreacher Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-05-05PCI/PM: Split pci_raw_set_power_state()Rafael J. Wysocki
The transitions from low-power states to D0 and the other way around are unnecessarily tangled in pci_raw_set_power_state() which makes it rather hard to follow. Moreover, the only caller of pci_raw_set_power_state() passing PCI_D0 as its state argument is pci_power_up(), so the code carrying out transitions into D0 can be put directly into that function. Accordingly, move the code handling transitions from low-power states into D0 directly into pci_power_up() and rename the remaining part of pci_raw_set_power_state() to pci_set_low_power_state(), because it only handles transitions into low-power state now. While at it, fix up some white space, update some comments and modify messages printed by pci_power_up() and pci_set_low_power_state() to be less confusing (which is the only expected functional impact of this change). Link: https://lore.kernel.org/r/13038676.uLZWGnKmhe@kreacher Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-05-05PCI/PM: Rearrange pci_update_current_state()Rafael J. Wysocki
Save one config space access in pci_update_current_state() by testing the retrieved PCI_PM_CTRL register value against PCI_POSSIBLE_ERROR() instead of invoking pci_device_is_present() separately. While at it, drop a pair of unnecessary parens. No expected functional impact. Link: https://lore.kernel.org/r/1917095.PYKUYFuaPT@kreacher Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-05-05PCI/PM: Drop the runtime_d3cold device flagRafael J. Wysocki
The runtime_d3cold flag is not needed any more, so drop it. Link: https://lore.kernel.org/r/8077784.T7Z3S40VBb@kreacher Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-05-05PCI/PM: Resume subordinate bus in bus type callbacksRafael J. Wysocki
Calling pci_resume_bus() on the secondary bus from pci_power_up() as it is done now is questionable, because it depends on the mandatory bridge power-up delays that are only covered by the PCI bus type PM callbacks. For this reason, move the subordinate bus resume to those callbacks too and use the observation that if a bridge is being powered-up during resume from system-wide suspend, it may be still desirable to runtime-resume its subordinate bus after completing the system-wide transition (in case the resume of the devices on that bus is skipped during it). Link: https://lore.kernel.org/r/3190097.aeNJFYEL58@kreacher Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-05-05PCI/PM: Power up all devices during runtime resumeRafael J. Wysocki
Currently, endpoint devices may not be powered up entirely during runtime resume that follows a D3hot -> D0 transition of the parent bridge. Namely, even if the power state of an endpoint device, as indicated by its PCI_PM_CTRL register, is D0 after powering up its parent bridge, it may be still necessary to bring its ACPI companion into D0 and that should be done before accessing it. However, the current code assumes that reading the PCI_PM_CTRL register is sufficient to establish the endpoint device's power state, which may lead to problems. Address that by forcing a power-up of all PCI devices, including the platform firmware part of it, during runtime resume. Link: https://lore.kernel.org/linux-pm/11967527.O9o76ZdvQC@kreacher Fixes: 5775b843a619 ("PCI: Restore config space on runtime resume despite being unbound") Link: https://lore.kernel.org/r/2652115.mvXUDI8C0e@kreacher Reported-by: Abhishek Sahu <abhsahu@nvidia.com> Tested-by: Abhishek Sahu <abhsahu@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-05-05PCI/PM: Define pci_restore_standard_config() only for CONFIG_PM_SLEEPKrzysztof Kozlowski
pci_restore_standard_config() was defined under CONFIG_PM but called only by pci_pm_resume() (defined under CONFIG_SUSPEND) and pci_pm_restore() (defined under CONFIG_HIBERNATE_CALLBACKS). A configuration with only CONFIG_PM leads to a warning: drivers/pci/pci-driver.c:533:12: error: ‘pci_restore_standard_config’ defined but not used [-Werror=unused-function] CONFIG_PM_SLEEP depends on CONFIG_SUSPEND and CONFIG_HIBERNATE_CALLBACKS, so define pci_restore_standard_config() under that instead. Link: https://lore.kernel.org/r/20220420141135.444820-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-04-28PCI: versatile: Remove redundant variable retvalColin Ian King
Variable retval is being assigned a value that is never read, the variable is redundant and can be removed. Cleans up clang scan build warning: drivers/pci/controller/pci-versatile.c:37:10: warning: Although the value stored to 'retval' is used in the enclosing expression, the value is never actually read from 'retval' [deadcode.DeadStores] Link: https://lore.kernel.org/r/20220418144416.86121-1-colin.i.king@gmail.com Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-04-25PCI: microchip: Add a missing semicolonUwe Kleine-König
If the driver is configured as a module (after allowing this by changing PCIE_MICROCHIP_HOST from bool to tristate) the missing semicolon makes the compiler very unhappy. While there isn't a real problem as MODULE_DEVICE_TABLE always evaluates to nothing for a built-in driver, do it right for consistency with other drivers. Link: https://lore.kernel.org/r/20220420065832.14173-1-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Daire McNamara <daire.mcnamara@microchip.com>
2022-04-25PCI: mvebu: Add support for sending Set_Slot_Power_Limit messagePali Rohár
If DT supplies the 'slot-power-limit-milliwatt' property, program the value in the Slot Power Limit in the Slot Capabilities register and program the Root Port to send a Set_Slot_Power_Limit Message when the Link transitions to DL_Up. Link: https://lore.kernel.org/r/20220412094946.27069-5-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2022-04-25PCI: Add function for parsing 'slot-power-limit-milliwatt' DT propertyPali Rohár
Add function of_pci_get_slot_power_limit(), which parses the 'slot-power-limit-milliwatt' DT property, returning the value in milliwatts and in format ready for the PCIe Slot Capabilities Register. Link: https://lore.kernel.org/r/20220412094946.27069-4-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
2022-04-25PCI: Add PCI_EXP_SLTCTL_ASPL_DISABLE macroPali Rohár
Add macro defining Auto Slot Power Limit Disable bit in Slot Control Register. Link: https://lore.kernel.org/r/20220412094946.27069-2-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2022-04-21PCI/doc: Update obsolete pci_set_dma_mask() referencesAlex Williamson
The function is dma_set_mask(), fix a missed instance of the old pci_set_dma_mask() and a reference to a function that doesn't exist. Fixes: 05b0ebd06ae6 ("PCI/doc: cleanup references to the legacy PCI DMA API") Link: https://lore.kernel.org/r/165048747271.2959320.13475081883467312497.stgit@omen Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2022-04-11PCI/P2PDMA: Whitelist Intel Skylake-E Root Ports at any devfnShlomo Pongratz
In 7b94b53db34f ("PCI/P2PDMA: Add Intel Sky Lake-E Root Ports B, C, D to the whitelist"), Andrew Maier added Skylake-E 2031, 2032, and 2033 Root Ports to the pci_p2pdma_whitelist[], so we assume P2PDMA between devices below these ports works. Previously we only checked the whitelist for a device at devfn 00.0 on the root bus, which is often a "host bridge". But these Skylake Root Ports may be at any devfn and there may be no "host bridge" device. Generalize pci_host_bridge_dev() so we check the first device on the root bus, whether it is devfn 00.0 or a PCIe Root Port, against the whitelist. [bhelgaas: commit log, comment] Link: https://lore.kernel.org/r/20220410105213.690-2-shlomop@pliops.com Tested-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Shlomo Pongratz <shlomop@pliops.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Andrew Maier <andrew.maier@eideticom.com>
2022-04-11PCI: tegra194: Remove unnecessary MSI enable reg save and restoreJisheng Zhang
The integrated MSI Receiver enable register is always initialized in dw_pcie_setup_rc() which is also called in resume code path, so we don't need to save/restore the enable register during suspend/resume. Link: https://lore.kernel.org/r/20211226074910.2722-1-jszhang@kernel.org Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Vidya Sagar <vidyas@nvidia.com>
2022-04-08x86/PCI: Clip only host bridge windows for E820 regionsBjorn Helgaas
ACPI firmware advertises PCI host bridge resources via PNP0A03 _CRS methods. Some BIOSes include non-window address space in _CRS, and if we allocate that non-window space for PCI devices, they don't work. 4dc2287c1805 ("x86: avoid E820 regions when allocating address space") works around this issue by clipping out any regions mentioned in the E820 table in the allocate_resource() path, but the implementation has a couple issues: - The clipping is done for *all* allocations, not just those for PCI address space, and - The clipping is done at each allocation instead of being done once when setting up the host bridge windows. Rework the implementation so we only clip PCI host bridge windows, and we do it once when setting them up. Example output changes: BIOS-e820: [mem 0x00000000b0000000-0x00000000c00fffff] reserved + acpi PNP0A08:00: clipped [mem 0xc0000000-0xfebfffff window] to [mem 0xc0100000-0xfebfffff window] for e820 entry [mem 0xb0000000-0xc00fffff] - pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] + pci_bus 0000:00: root bus resource [mem 0xc0100000-0xfebfffff window] Link: https://lore.kernel.org/r/20220304035110.988712-3-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-08x86: Log resource clipping for E820 regionsBjorn Helgaas
When remove_e820_regions() clips a resource because an E820 region overlaps it, log a note in dmesg to add in debugging. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-04-08PCI: dwc: Fix setting error return on MSI DMA mapping failureJiantao Zhang
When dma_mapping_error() returns error because of no enough memory, but dw_pcie_host_init() returns success, which will mislead the callers. Link: https://lore.kernel.org/r/30170911-0e2f-98ce-9266-70465b9073e5@huawei.com Fixes: 07940c369a6b ("PCI: dwc: Fix MSI page leakage in suspend/resume") Signed-off-by: Jianrong Zhang <zhangjianrong5@huawei.com> Signed-off-by: Jiantao Zhang <water.zhangjiantao@huawei.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2022-04-08PCI: mediatek: Fix refcount leak in mtk_pcie_subsys_powerup()Miaoqian Lin
The of_find_compatible_node() function returns a node pointer with refcount incremented, We should use of_node_put() on it when done Add the missing of_node_put() to release the refcount. Link: https://lore.kernel.org/r/20220309091953.5630-1-linmq006@gmail.com Fixes: 87e8657ba99c ("PCI: mediatek: Add new method to get shared pcie-cfg base address") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Acked-by: Rob Herring <robh@kernel.org>
2022-04-08PCI: rockchip: Fix find_first_zero_bit() limitDan Carpenter
The ep->ob_region_map bitmap is a long and it has BITS_PER_LONG bits. Link: https://lore.kernel.org/r/20220315065944.GB13572@kili Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-04-08PCI: cadence: Fix find_first_zero_bit() limitDan Carpenter
The ep->ob_region_map bitmap is a long and it has BITS_PER_LONG bits. Link: https://lore.kernel.org/r/20220315065829.GA13572@kili Fixes: 37dddf14f1ae ("PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-04-08dt-bindings: pci: layerscape-pci: define AER/PME interruptsLi Yang
Different platforms using this controller are using different numbers of interrupt lines and the routing of events to these interrupt lines are different too. So instead of trying to define names for these interrupt lines, we define the more specific AER/PME events that are routed to these interrupt lines. For platforms which only has a single interrupt line for miscellaneous controller events, we can keep using the original "intr" name for backward compatibility. Also change the example from ls1021a to ls1088a for better representation. Link: https://lore.kernel.org/r/20220311234938.8706-5-leoyang.li@nxp.com Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2022-04-08dt-bindings: pci: layerscape-pci: Add EP mode compatible strings for ls1028aXiaowei Bao
Add EP mode compatible string for ls1028a. Link: https://lore.kernel.org/r/20220311234938.8706-4-leoyang.li@nxp.com Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org>
2022-04-08dt-bindings: pci: layerscape-pci: Update the description of SCFG propertyHou Zhiqiang
Update the description of the second entry of 'fsl,pcie-scfg' property, as the LS1043A PCIe controller also has some control registers in SCFG block, while it has 3 controllers. Link: https://lore.kernel.org/r/20220311234938.8706-3-leoyang.li@nxp.com Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org>
2022-04-08dt-bindings: pci: layerscape-pci: Add a optional property big-endianHou Zhiqiang
This property is to indicate the endianness when accessing the PEX_LUT and PF register block, so if these registers are implemented in big-endian, specify this property. Link: https://lore.kernel.org/r/20220311234938.8706-2-leoyang.li@nxp.com Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org>
2022-04-07PCI/ASPM: Make Intel DG2 L1 acceptable latency unlimitedMika Westerberg
Intel DG2 discrete graphics PCIe endpoints advertise L1 acceptable exit latency to be < 1us even though they can actually tolerate unlimited exit latencies just fine. Quirk the L1 acceptable exit latency for these endpoints to be unlimited so ASPM L1 can be enabled. [bhelgaas: use FIELD_GET/FIELD_PREP, wordsmith comment & commit log] Link: https://lore.kernel.org/r/20220405093810.76613-1-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-04-05PCI: hotplug: Clean up include filesChristophe Leroy
arch/powerpc/include/asm/prom.h includes some headers that it doesn't need itself. Add the missing headers to files that include prom.h so we can remove them from prom.h. Link: https://lore.kernel.org/r/79201f5fae8d003164ac36ed3be7789db1bc5ab4.1648833421.git.christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-04-04x86/PCI: Eliminate remove_e820_regions() common subexpressionsBjorn Helgaas
Add local variables to reduce repetition later. No functional change intended. Link: https://lore.kernel.org/r/20220304035110.988712-2-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-04PCI/ACPI: Allow D3 only if Root Port can signal and wake from D3Mario Limonciello
acpi_pci_bridge_d3(dev) returns "true" if "dev" is a hotplug bridge that can handle hotplug events while in D3. Previously this meant either: - "dev" has a _PS0 or _PR0 method (acpi_pci_power_manageable()), or - The Root Port above "dev" has a _DSD with a "HotPlugSupportInD3" property with value 1. This did not consider _PRW, which tells us about wakeup GPEs (ACPI v6.4, sec 7.3.13). Without a wakeup GPE, from an ACPI perspective the Root Port has no way of generating wakeup signals, so hotplug events will be lost if we use D3. Similarly, it did not consider _S0W, which tells us the deepest D-state from which a device can wake itself (sec 7.3.20). If _S0W tells us the device cannot wake from D3, hotplug events will again be lost if we use D3. Some platforms, e.g., AMD Yellow Carp, supply "HotPlugSupportInD3" without _PRW or with an _S0W that says the Root Port cannot wake from D3. On those platforms, we previously put bridges in D3hot, hotplug events were lost, and hotplugged devices would not be recognized without manually rescanning. Allow bridges to be put in D3 only if the Root Port can generate wakeup GPEs (wakeup.flags.valid), it can wake from D3 (_S0W), AND it has the "HotPlugSupportInD3" property. Neither Windows 10 nor Windows 11 puts the bridge in D3 when the firmware is configured this way, and this change aligns the handling of the situation to be the same. [bhelgaas: commit log, tidy "HotPlugSupportInD3" check and comment] Link: https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/07_Power_and_Performance_Mgmt/device-power-management-objects.html?highlight=s0w#s0w-s0-device-wake-state Link: https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports#identifying-pcie-root-ports-supporting-hot-plug-in-d3 Link: https://lore.kernel.org/r/20220401034003.3166-1-mario.limonciello@amd.com Fixes: 26ad34d510a87 ("PCI / ACPI: Whitelist D3 for more PCIe hotplug ports") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-03Linux 5.18-rc1v5.18-rc1Linus Torvalds
2022-04-03Merge tag 'trace-v5.18-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull more tracing updates from Steven Rostedt: - Rename the staging files to give them some meaning. Just stage1,stag2,etc, does not show what they are for - Check for NULL from allocation in bootconfig - Hold event mutex for dyn_event call in user events - Mark user events to broken (to work on the API) - Remove eBPF updates from user events - Remove user events from uapi header to keep it from being installed. - Move ftrace_graph_is_dead() into inline as it is called from hot paths and also convert it into a static branch. * tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Move user_events.h temporarily out of include/uapi ftrace: Make ftrace_graph_is_dead() a static branch tracing: Set user_events to BROKEN tracing/user_events: Remove eBPF interfaces tracing/user_events: Hold event_mutex during dyn_event_add proc: bootconfig: Add null pointer check tracing: Rename the staging files for trace_events
2022-04-03Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "A single revert to fix a boot regression seen when clk_put() started dropping rate range requests. It's best to keep various systems booting so we'll kick this out and try again next time" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: Revert "clk: Drop the rate range on clk_put()"
2022-04-03Merge tag 'x86-urgent-2022-04-03' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of x86 fixes and updates: - Make the prctl() for enabling dynamic XSTATE components correct so it adds the newly requested feature to the permission bitmap instead of overwriting it. Add a selftest which validates that. - Unroll string MMIO for encrypted SEV guests as the hypervisor cannot emulate it. - Handle supervisor states correctly in the FPU/XSTATE code so it takes the feature set of the fpstate buffer into account. The feature sets can differ between host and guest buffers. Guest buffers do not contain supervisor states. So far this was not an issue, but with enabling PASID it needs to be handled in the buffer offset calculation and in the permission bitmaps. - Avoid a gazillion of repeated CPUID invocations in by caching the values early in the FPU/XSTATE code. - Enable CONFIG_WERROR in x86 defconfig. - Make the X86 defconfigs more useful by adapting them to Y2022 reality" * tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu/xstate: Consolidate size calculations x86/fpu/xstate: Handle supervisor states in XSTATE permissions x86/fpu/xsave: Handle compacted offsets correctly with supervisor states x86/fpu: Cache xfeature flags from CPUID x86/fpu/xsave: Initialize offset/size cache early x86/fpu: Remove unused supervisor only offsets x86/fpu: Remove redundant XCOMP_BV initialization x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO x86/config: Make the x86 defconfigs a bit more usable x86/defconfig: Enable WERROR selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
2022-04-03Merge tag 'core-urgent-2022-04-03' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RT signal fix from Thomas Gleixner: "Revert the RT related signal changes. They need to be reworked and generalized" * tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
2022-04-03Merge tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull more dma-mapping updates from Christoph Hellwig: - fix a regression in dma remap handling vs AMD memory encryption (me) - finally kill off the legacy PCI DMA API (Christophe JAILLET) * tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: move pgprot_decrypted out of dma_pgprot PCI/doc: cleanup references to the legacy PCI DMA API PCI: Remove the deprecated "pci-dma-compat.h" API
2022-04-03Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: - avoid unnecessary rebuilds for library objects - fix return value of __setup handlers - fix invalid input check for "crashkernel=" kernel option - silence KASAN warnings in unwind_frame * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9191/1: arm/stacktrace, kasan: Silence KASAN warnings in unwind_frame() ARM: 9190/1: kdump: add invalid input check for 'crashkernel=0' ARM: 9187/1: JIVE: fix return value of __setup handler ARM: 9189/1: decompressor: fix unneeded rebuilds of library objects
2022-04-02Revert "clk: Drop the rate range on clk_put()"Stephen Boyd
This reverts commit 7dabfa2bc4803eed83d6f22bd6f045495f40636b. There are multiple reports that this breaks boot on various systems. The common theme is that orphan clks are having rates set on them when that isn't expected. Let's revert it out for now so that -rc1 boots. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Tony Lindgren <tony@atomide.com> Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Link: https://lore.kernel.org/r/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com Cc: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220403022818.39572-1-sboyd@kernel.org
2022-04-02Merge tag 'perf-tools-for-v5.18-2022-04-02' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Avoid SEGV if core.cpus isn't set in 'perf stat'. - Stop depending on .git files for building PERF-VERSION-FILE, used in 'perf --version', fixing some perf tools build scenarios. - Convert tracepoint.py example to python3. - Update UAPI header copies from the kernel sources: socket, mman-common, msr-index, KVM, i915 and cpufeatures. - Update copy of libbpf's hashmap.c. - Directly return instead of using local ret variable in evlist__create_syswide_maps(), found by coccinelle. * tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf python: Convert tracepoint.py example to python3 perf evlist: Directly return instead of using local ret variable perf cpumap: More cpu map reuse by merge. perf cpumap: Add is_subset function perf evlist: Rename cpus to user_requested_cpus perf tools: Stop depending on .git files for building PERF-VERSION-FILE tools headers cpufeatures: Sync with the kernel sources tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Sync linux/kvm.h with the kernel sources tools kvm headers arm64: Update KVM headers from the kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources tools headers UAPI: Sync asm-generic/mman-common.h with the kernel perf beauty: Update copy of linux/socket.h with the kernel sources perf tools: Update copy of libbpf's hashmap.c perf stat: Avoid SEGV if core.cpus isn't set
2022-04-02Merge tag 'kbuild-fixes-v5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix empty $(PYTHON) expansion. - Fix UML, which got broken by the attempt to suppress Clang warnings. - Fix warning message in modpost. * tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: modpost: restore the warning message for missing symbol versions Revert "um: clang: Strip out -mno-global-merge from USER_CFLAGS" kbuild: Remove '-mno-global-merge' kbuild: fix empty ${PYTHON} in scripts/link-vmlinux.sh kconfig: remove stale comment about removed kconfig_print_symbol()
2022-04-02Merge tag 'mips_5.18_1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - build fix for gpio - fix crc32 build problems - check for failed memory allocations * tag 'mips_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: crypto: Fix CRC32 code MIPS: rb532: move GPIOD definition into C-files MIPS: lantiq: check the return value of kzalloc() mips: sgi-ip22: add a check for the return of kzalloc()
2022-04-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: - Only do MSR filtering for MSRs accessed by rdmsr/wrmsr - Documentation improvements - Prevent module exit until all VMs are freed - PMU Virtualization fixes - Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences - Other miscellaneous bugfixes * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits) KVM: x86: fix sending PV IPI KVM: x86/mmu: do compare-and-exchange of gPTE via the user address KVM: x86: Remove redundant vm_entry_controls_clearbit() call KVM: x86: cleanup enter_rmode() KVM: x86: SVM: fix tsc scaling when the host doesn't support it kvm: x86: SVM: remove unused defines KVM: x86: SVM: move tsc ratio definitions to svm.h KVM: x86: SVM: fix avic spec based definitions again KVM: MIPS: remove reference to trap&emulate virtualization KVM: x86: document limitations of MSR filtering KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr KVM: x86/emulator: Emulate RDPID only if it is enabled in guest KVM: x86/pmu: Fix and isolate TSX-specific performance event logic KVM: x86: mmu: trace kvm_mmu_set_spte after the new SPTE was set KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs KVM: x86: Trace all APICv inhibit changes and capture overall status KVM: x86: Add wrappers for setting/clearing APICv inhibits KVM: x86: Make APICv inhibit reasons an enum and cleanup naming KVM: X86: Handle implicit supervisor access with SMAP KVM: X86: Rename variable smap to not_smap in permission_fault() ...
2022-04-03modpost: restore the warning message for missing symbol versionsMasahiro Yamada
This log message was accidentally chopped off. I was wondering why this happened, but checking the ML log, Mark precisely followed my suggestion [1]. I just used "..." because I was too lazy to type the sentence fully. Sorry for the confusion. [1]: https://lore.kernel.org/all/CAK7LNAR6bXXk9-ZzZYpTqzFqdYbQsZHmiWspu27rtsFxvfRuVA@mail.gmail.com/ Fixes: 4a6795933a89 ("kbuild: modpost: Explicitly warn about unprototyped symbols") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
2022-04-02Merge tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver fix from Jens Axboe: "Got two reports on nbd spewing warnings on load now, which is a regression from a commit that went into your tree yesterday. Revert the problematic change for now" * tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-block: Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"
2022-04-02Merge tag 'pci-v5.18-changes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci fix from Bjorn Helgaas: - Fix Hyper-V "defined but not used" build issue added during merge window (YueHaibing) * tag 'pci-v5.18-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: hv: Remove unused hv_set_msi_entry_from_desc()
2022-04-02Merge tag 'tag-chrome-platform-for-v5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "cros_ec_typec: - Check for EC device - Fix a crash when using the cros_ec_typec driver on older hardware not capable of typec commands - Make try power role optional - Mux configuration reorganization series from Prashant cros_ec_debugfs: - Fix use after free. Thanks Tzung-bi sensorhub: - cros_ec_sensorhub fixup - Split trace include file misc: - Add new mailing list for chrome-platform development: chrome-platform@lists.linux.dev Now with patchwork!" * tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_debugfs: detach log reader wq from devm platform: chrome: Split trace include file platform/chrome: cros_ec_typec: Update mux flags during partner removal platform/chrome: cros_ec_typec: Configure muxes at start of port update platform/chrome: cros_ec_typec: Get mux state inside configure_mux platform/chrome: cros_ec_typec: Move mux flag checks platform/chrome: cros_ec_typec: Check for EC device platform/chrome: cros_ec_typec: Make try power role optional MAINTAINERS: platform-chrome: Add new chrome-platform@lists.linux.dev list
2022-04-02Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"Jens Axboe
This reverts commit 6d35d04a9e18990040e87d2bbf72689252669d54. Both Gabriel and Borislav report that this commit casues a regression with nbd: sysfs: cannot create duplicate filename '/dev/block/43:0' Revert it before 5.18-rc1 and we'll investigage this separately in due time. Link: https://lore.kernel.org/all/YkiJTnFOt9bTv6A2@zn.tnic/ Reported-by: Gabriel L. Somlo <somlo@cmu.edu> Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-13 01:08:27 +0000