| Age | Commit message (Collapse) | Author |
|---|
|
Another highly rare error case when a page allocating loop (inside
__nfs4_get_acl_uncached, this time) is not properly unwound on error.
Since pages array is allocated being uninitialized, need to free only
lower array indices. NULL checks were useful before commit 62a1573fcf84
("NFSv4 fix acl retrieval over krb5i/krb5p mounts") when the array had
been initialized to zero on stack.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 62a1573fcf84 ("NFSv4 fix acl retrieval over krb5i/krb5p mounts")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
There is a slight issue with error handling code inside
nfs42_proc_getxattr(). If page allocating loop fails then we free the
failing page array element which is NULL but __free_page() can't deal with
NULL args.
Found by Linux Verification Center (linuxtesting.org).
Fixes: a1f26739ccdc ("NFSv4.2: improve page handling for GETXATTR")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Free the formatted server index string after it has been duplicated by
kobject_rename().
Fixes: 1c7251187dc0 ("NFS: add superblock sysfs entries")
Reported-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Chuck reported [1] an IO hang problem on NFS exports that reside on SATA
devices and bisected to commit 615939a2ae73 ("blk-mq: defer to the normal
submission path for post-flush requests").
We analysed the IO hang problem, found there are two postflush requests
waiting for each other.
The first postflush request completed the REQ_FSEQ_DATA sequence, so go to
the REQ_FSEQ_POSTFLUSH sequence and added in the flush pending list, but
failed to blk_kick_flush() because of the second postflush request which
is inflight waiting in scheduler queue.
The second postflush waiting in scheduler queue can't be dispatched because
the first postflush hasn't released scheduler resource even though it has
completed by itself.
Fix it by releasing scheduler resource when the first postflush request
completed, so the second postflush can be dispatched and completed, then
make blk_kick_flush() succeed.
While at it, remove the check for e->ops.finish_request, as all
schedulers set that. Reaffirm this requirement by adding a WARN_ON_ONCE()
at scheduler registration time, just like we do for insert_requests and
dispatch_request.
[1] https://lore.kernel.org/all/7A57C7AE-A51A-4254-888B-FE15CA21F9E9@oracle.com/
Link: https://lore.kernel.org/linux-block/20230819031206.2744005-1-chengming.zhou@linux.dev/
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202308172100.8ce4b853-oliver.sang@intel.com
Fixes: 615939a2ae73 ("blk-mq: defer to the normal submission path for post-flush requests")
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20230813152325.3017343-1-chengming.zhou@linux.dev
[axboe: folded in incremental fix and added tags]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Guangguan Wang says:
====================
net/smc: several features's implementation for smc v2.1
This patch set implement several new features in SMC v2.1(https://
www.ibm.com/support/pages/node/7009315), including vendor unique
experimental options, max connections per lgr negotiation, max links
per lgr negotiation.
v1 - v2:
- rename field fce_v20 to fce_v2_base in struct
smc_clc_first_contact_ext_v2x
- use smc_get_clc_first_contact_ext in smc_connect
_rdma_v2_prepare
- adding comment about field vendor_oui in struct
smc_clc_msg_smcd
- remove comment about SMC_CONN_PER_LGR_MAX in smc_
clc_srv_v2x_features_validate
- rename smc_clc_clnt_v2x_features_validate
RFC v2 - v1:
- more description in commit message
- modify SMC_CONN_PER_LGR_xxx and SMC_LINKS_ADD_LNK_xxx
macro defination and usage
- rename field release_ver to release_nr
- remove redundant release version check in client
- explicitly set the rc value in smc_llc_cli/srv_add_link
RFC v1 - RFC v2:
- Remove ini pointer NULL check and fix code style in
smc_clc_send_confirm_accept.
- Optimize the max_conns check in smc_clc_xxx_v2x_features_validate.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add SMC_NLA_LGR_R_V2_MAX_CONNS and SMC_NLA_LGR_R_V2_MAX_LINKS
to SMCR v2 linkgroup netlink attribute SMC_NLA_LGR_R_V2 for
linkgroup's detail info showing.
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Support max links per lgr negotiation in clc handshake for SMCR v2.1,
which is one of smc v2.1 features. Server makes decision for the final
value of max links based on the client preferred max links and
self-preferred max links. Here use the minimum value of the client
preferred max links and server preferred max links.
Client Server
Proposal(max links(client preferred))
-------------------------------------->
Accept(max links(accepted value))
accepted value=min(client preferred, server preferred)
<-------------------------------------
Confirm(max links(accepted value))
------------------------------------->
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Support max connections per lgr negotiation for SMCR v2.1,
which is one of smc v2.1 features. Server makes decision for
the final value of max conns based on the client preferred
max conns and self-preferred max conns. Here use the minimum
value of client preferred max conns and server preferred max
conns.
Client Server
Proposal(max conns(client preferred))
------------------------------------>
Accept(max conns(accepted value))
accepted value=min(client preferred, server preferred)
<-----------------------------------
Confirm(max conns(accepted value))
----------------------------------->
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Support SMC v2.x features validate for SMC v2.1. This is the frame
code for SMC v2.x features validate, and will take effects only when
the negotiated release version is v2.1 or later.
For Server, v2.x features' validation should be done in smc_clc_srv_
v2x_features_validate when receiving v2.1 or later CLC Proposal Message,
such as max conns, max links negotiation, the decision of the final
value of max conns and max links should be made in this function.
And final check for server when receiving v2.1 or later CLC Confirm
Message should be done in smc_clc_v2x_features_confirm_check.
For client, v2.x features' validation should be done in smc_clc_clnt_
v2x_features_validate when receiving v2.1 or later CLC Accept Message,
for example, the decision to accpt the accepted value or to decline
should be made in this function.
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add vendor unique experimental options area in clc handshake. In clc
accept and confirm msg, vendor unique experimental options use the
16-Bytes reserved field, which defined in struct smc_clc_fce_gid_ext
in previous version. Because of the struct smc_clc_first_contact_ext
is widely used and limit the scope of modification, this patch moves
the 16-Bytes reserved field out of struct smc_clc_fce_gid_ext, and
followed with the struct smc_clc_first_contact_ext in a new struct
names struct smc_clc_first_contact_ext_v2x.
For SMC-R first connection, in previous version, the struct smc_clc_
first_contact_ext and the 16-Bytes reserved field has already been
included in clc accept and confirm msg. Thus, this patch use struct
smc_clc_first_contact_ext_v2x instead of the struct smc_clc_first_
contact_ext and the 16-Bytes reserved field in SMC-R clc accept and
confirm msg is compatible with previous version.
For SMC-D first connection, in previous version, only the struct smc_
clc_first_contact_ext is included in clc accept and confirm msg, and
the 16-Bytes reserved field is not included. Thus, when the negotiated
smc release version is the version before v2.1, we still use struct
smc_clc_first_contact_ext for compatible consideration. If the negotiated
smc release version is v2.1 or later, use struct smc_clc_first_contact_
ext_v2x instead.
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Support smc release version negotiation in clc handshake based on
SMC v2, where no negotiation process for different releases, but
for different versions. The latest smc release version was updated
to v2.1. And currently there are two release versions of SMCv2, v2.0
and v2.1. In the release version negotiation, client sends the preferred
release version by CLC Proposal Message, server makes decision for which
release version to use based on the client preferred release version and
self-supported release version (here choose the minimum release version
of the client preferred and server latest supported), then the decision
returns to client by CLC Accept Message. Client confirms the decision by
CLC Confirm Message.
Client Server
Proposal(preferred release version)
------------------------------------>
Accept(accpeted release version)
min(client preferred, server latest supported)
<------------------------------------
Confirm(accpeted release version)
------------------------------------>
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Based on the original code semantic in case of Clause 45 MDIO, the address
command is supposed to be followed by the command sending the MMD address,
not the CSR address. The commit 002dd3de097c ("net: mdio: mdio-bitbang:
Separate C22 and C45 transactions") has erroneously broken that. So most
likely due to an unfortunate variable name it switched the code to sending
the CSR address. In our case it caused the protocol malfunction so the
read operation always failed with the turnaround bit always been driven to
one by PHY instead of zero. Fix that by getting back the correct
behaviour: sending MMD address command right after the regular address
command.
Fixes: 002dd3de097c ("net: mdio: mdio-bitbang: Separate C22 and C45 transactions")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use WARN instead of printk + WARN_ON as reported from coccinelle:
./fs/dcache.c:1667:1-7: SUGGESTION: printk + WARN_ON can be just WARN
Signed-off-by: Anh Tuan Phan <tuananhlfc@gmail.com>
Message-Id: <20230817163142.117706-1-tuananhlfc@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The pointer buf is being initializated with a value that is never read,
it is being re-assigned later on at the pointer where it is being used.
The initialization is redundant and can be removed. Cleans up clang scan
build warning:
fs/pipe.c:492:24: warning: Value stored to 'buf' during its
initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Message-Id: <20230818144556.1208082-1-colin.i.king@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
802.1X PAE frames are link-local frames, therefore they must be trapped to
the CPU port. Currently, the MT753X switches treat 802.1X PAE frames as
regular multicast frames, therefore flooding them to user ports. To fix
this, set 802.1X PAE frames to be trapped to the CPU port(s).
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Three driver fixes"
* tag 'media/v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: imx: imx7-media-csi: Fix applying format constraints
media: uvcvideo: Fix menu count handling for userspace XU mappings
media: mtk-jpeg: Set platform driver data earlier
|
|
These have a variety of causes and a corresponding variety of solutions.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Message-Id: <20230818200824.2720007-1-willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This documentation has bit-rotted over time.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Message-Id: <20230818201003.2720257-1-willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"Extraordinary embargoed times call for extraordinary measures. That's
why this week's x86/urgent branch is larger than usual, containing all
the known fallout fixes after the SRSO mitigation got merged.
I know, it is a bit late in the game but everyone who has reported a
bug stemming from the SRSO pile, has tested that branch and has
confirmed that it fixes their bug.
Also, I've run it on every possible hardware I have and it is looking
good. It is running on this very machine while I'm typing, for 2 days
now without an issue. Famous last words...
- Use LEA ...%rsp instead of ADD %rsp in the Zen1/2 SRSO return
sequence as latter clobbers flags which interferes with fastop
emulation in KVM, leading to guests freezing during boot
- A fix for the DIV(0) quotient data leak on Zen1 to clear the
divider buffers at the right time
- Disable the SRSO mitigation on unaffected configurations as it got
enabled there unnecessarily
- Change .text section name to fix CONFIG_LTO_CLANG builds
- Improve the optprobe indirect jmp check so that certain
configurations can still be able to use optprobes at all
- A serious and good scrubbing of the untraining routines by PeterZ:
- Add proper speculation stopping traps so that objtool is happy
- Adjust objtool to handle the new thunks
- Make the thunk pointer assignable to the different untraining
sequences at runtime, thus avoiding the alternative at the
return thunk. It simplifies the code a bit too.
- Add a entry_untrain_ret() main entry point which selects the
respective untraining sequence
- Rename things so that they're more clear
- Fix stack validation with FRAME_POINTER=y builds
- Fix static call patching to handle when a JMP to the return thunk
is the last insn on the very last module memory page
- Add more documentation about what each untraining routine does and
why"
* tag 'x86_urgent_for_v6.5_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/srso: Correct the mitigation status when SMT is disabled
x86/static_call: Fix __static_call_fixup()
objtool/x86: Fixup frame-pointer vs rethunk
x86/srso: Explain the untraining sequences a bit more
x86/cpu/kvm: Provide UNTRAIN_RET_VM
x86/cpu: Cleanup the untrain mess
x86/cpu: Rename srso_(.*)_alias to srso_alias_\1
x86/cpu: Rename original retbleed methods
x86/cpu: Clean up SRSO return thunk mess
x86/alternative: Make custom return thunk unconditional
objtool/x86: Fix SRSO mess
x86/cpu: Fix up srso_safe_ret() and __x86_return_thunk()
x86/cpu: Fix __x86_return_thunk symbol type
x86/retpoline,kprobes: Skip optprobe check for indirect jumps with retpolines and IBT
x86/retpoline,kprobes: Fix position of thunk sections with CONFIG_LTO_CLANG
x86/srso: Disable the mitigation on unaffected configurations
x86/CPU/AMD: Fix the DIV(0) initial fix attempt
x86/retpoline: Don't clobber RFLAGS during srso_safe_ret()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Fix hardened usercopy BUG when using /proc based firmware update
interface
Thanks to Nathan Lynch and Kees Cook.
* tag 'powerpc-6.5-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/rtas_flash: allow user copy to flash block cache objects
|
|
Petr Machata says:
====================
mlxsw: Fixes for Spectrum-4
This patchset contains an assortment of fixes for mlxsw Spectrum-4 support.
====================
Link: https://lore.kernel.org/r/cover.1692268427.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove assumptions about shared buffer cell size and instead query the
cell size from devlink. Adjust the test to send small packets that fit
inside a single cell.
Tested on Spectrum-{1,2,3,4}.
Fixes: 4735402173e6 ("mlxsw: spectrum: Extend to support Spectrum-4 ASIC")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/f7dfbf3c4d1cb23838d9eb99bab09afaa320c4ca.1692268427.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The field 'virtual router' was extended to 12 bits in Spectrum-4.
Therefore, the element 'MLXSW_AFK_ELEMENT_VIRT_ROUTER_MSB' needs 3 bits for
Spectrum < 4 and 4 bits for Spectrum >= 4.
The elements are stored in an internal storage scratchpad. Currently, the
MSB is defined there as 3 bits. It means that for Spectrum-4, only 2K VRFs
can be used for multicast routing, as the highest bit is not really used by
the driver. Fix the definition of 'VIRT_ROUTER_MSB' to use 4 bits. Adjust
the definitions of 'virtual router' field in the blocks accordingly - use
'_avoid_size_check' for Spectrum-2 instead of for Spectrum-4. Fix the mask
in parse function to use 4 bits.
Fixes: 6d5d8ebb881c ("mlxsw: Rename virtual router flex key element")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/79bed2b70f6b9ed58d4df02e9798a23da648015b.1692268427.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The two most significant bits of the "local_port" field in the SSPR
register are always cleared since they are overwritten by the deprecated
and overlapping "sub_port" field.
On systems with more than 255 local ports (e.g., Spectrum-4), this
results in the firmware maintaining invalid mappings between system port
and local port. Specifically, two different systems ports (0x1 and
0x101) point to the same local port (0x1), which eventually leads to
firmware errors.
Fix by removing the deprecated "sub_port" field.
Fixes: fd24b29a1b74 ("mlxsw: reg: Align existing registers to use extended local_port field")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/9b909a3033c8d3d6f67f237306bef4411c5e6ae4.1692268427.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, in Spectrum-2 and above, time stamps are extracted from the CQE
into the time stamp fields in 'struct mlxsw_skb_cb', only when the CQE
time stamp type is UTC. The time stamps are read directly from the CQE and
software can get the time stamp in UTC format using CQEv2.
From Spectrum-4, the time stamps that are read from the CQE are allowed
to be also from MIRROR_UTC type.
Therefore, we get a warning [1] from the driver that the time stamp fields
were not set, when LLDP control packet is sent.
Allow the time stamp type to be MIRROR_UTC and set the time stamp in this
case as well.
[1]
WARNING: CPU: 11 PID: 0 at drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c:1409 mlxsw_sp2_ptp_hwtstamp_fill+0x1f/0x70 [mlxsw_spectrum]
[...]
Call Trace:
<IRQ>
mlxsw_sp2_ptp_receive+0x3c/0x80 [mlxsw_spectrum]
mlxsw_core_skb_receive+0x119/0x190 [mlxsw_core]
mlxsw_pci_cq_tasklet+0x3c9/0x780 [mlxsw_pci]
tasklet_action_common.constprop.0+0x9f/0x110
__do_softirq+0xbb/0x296
irq_exit_rcu+0x79/0xa0
common_interrupt+0x86/0xa0
</IRQ>
<TASK>
Fixes: 4735402173e6 ("mlxsw: spectrum: Extend to support Spectrum-4 ASIC")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/bcef4d044ef608a4e258d33a7ec0ecd91f480db5.1692268427.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 5d93cfcf7360 ("net: dpaa: Convert to phylink") removed
fman_set_mac_active_pause()/fman_get_pause_cfg() but not declarations.
Commit 48257c4f168e ("Add fs_enet ethernet network driver, for several
embedded platforms.") declared but never implemented
fs_enet_platform_init() and fs_enet_platform_cleanup().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230817134159.38484-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are two network devices(veth1 and veth3) in ns1, and ipvlan1 with
L3S mode and ipvlan2 with L2 mode are created based on them as
figure (1). In this case, ipvlan_register_nf_hook() will be called to
register nf hook which is needed by ipvlans in L3S mode in ns1 and value
of ipvl_nf_hook_refcnt is set to 1.
(1)
ns1 ns2
------------ ------------
veth1--ipvlan1 (L3S)
veth3--ipvlan2 (L2)
(2)
ns1 ns2
------------ ------------
veth1--ipvlan1 (L3S)
ipvlan2 (L2) veth3
| |
|------->-------->--------->--------
migrate
When veth3 migrates from ns1 to ns2 as figure (2), veth3 will register in
ns2 and calls call_netdevice_notifiers with NETDEV_REGISTER event:
dev_change_net_namespace
call_netdevice_notifiers
ipvlan_device_event
ipvlan_migrate_l3s_hook
ipvlan_register_nf_hook(newnet) (I)
ipvlan_unregister_nf_hook(oldnet) (II)
In function ipvlan_migrate_l3s_hook(), ipvl_nf_hook_refcnt in ns1 is not 0
since veth1 with ipvlan1 still in ns1, (I) and (II) will be called to
register nf_hook in ns2 and unregister nf_hook in ns1. As a result,
ipvl_nf_hook_refcnt in ns1 is decreased incorrectly and this in ns2
is increased incorrectly. When the second net namespace is removed, a
reference count leak warning in ipvlan_ns_exit() will be triggered.
This patch add a check before ipvlan_migrate_l3s_hook() is called. The
warning can be triggered as follows:
$ ip netns add ns1
$ ip netns add ns2
$ ip netns exec ns1 ip link add veth1 type veth peer name veth2
$ ip netns exec ns1 ip link add veth3 type veth peer name veth4
$ ip netns exec ns1 ip link add ipv1 link veth1 type ipvlan mode l3s
$ ip netns exec ns1 ip link add ipv2 link veth3 type ipvlan mode l2
$ ip netns exec ns1 ip link set veth3 netns ns2
$ ip net del ns2
Fixes: 3133822f5ac1 ("ipvlan: use pernet operations and restrict l3s hooks to master netns")
Signed-off-by: Lu Wei <luwei32@huawei.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230817145449.141827-1-luwei32@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We changed tcp_poll() over time, bug never updated dccp.
Note that we also could remove dccp instead of maintaining it.
Fixes: 7c657876b63c ("[DCCP]: Initial implementation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230818015820.2701595-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enabling BIG TCP on a low end platform apparently increased
chances of getting flows locked on one busy TX queue.
A similar problem was handled in commit 9b462d02d6dd
("tcp: TCP Small Queues and strange attractors"),
but the strategy worked for either bulk flows,
or 'large enough' RPC. BIG TCP changed how large
RPC needed to be to enable the work around:
If RPC fits in a single skb, TSQ never triggers.
Root cause for the problem is a busy TX queue,
with delayed TX completions.
This patch changes how we set skb->ooo_okay to detect
the case TX completion was not done, but incoming ACK
already was processed and emptied rtx queue.
Update the comment to explain the tricky details.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230817182353.2523746-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
*prot->memory_pressure is read/writen locklessly, we need
to add proper annotations.
A recent commit added a new race, it is time to audit all accesses.
Fixes: 2d0c88e84e48 ("sock: Fix misuse of sk_under_memory_pressure()")
Fixes: 4d93df0abd50 ("[SCTP]: Rewrite of sctp buffer management code")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Abel Wu <wuyun.abel@bytedance.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Link: https://lore.kernel.org/r/20230818015132.2699348-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Michael Chan says:
====================
bnxt_en: Update for net-next
This patchset contains 2 features:
- The page pool implementation for the normal RX path (non-XDP) for
paged buffers in the aggregation ring.
- Saving of the ring error counters across reset.
====================
Link: https://lore.kernel.org/r/20230817231911.165035-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new tx_resets ring counter. This counter will be saved as
tx_total_resets across any reset. Since we currently do a full reset
in bnxt_sched_reset_txr(), the per ring counter will always be cleared
during reset. Only the tx_total_resets count will be meaningful and we
only display this under ethtool -S.
Link: https://lore.kernel.org/netdev/CACKFLimD-bKmJ1tGZOLYRjWzEwxkri-Mw7iFme1x2Dr0twdCeg@mail.gmail.com/
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230817231911.165035-7-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The existing driver displays the sum of 4 ring counters under ethtool -S.
These counters are in the array bnxt_sw_func_stats. These counters are
summed at the time of ethtool -S and will be lost when the device is reset.
Replace these counters with the new total ring error counters added in the
last patch. These new counters are saved before reset. ethtool -S will
now display the sum of the saved counters plus the current counters.
Link: https://lore.kernel.org/netdev/CACKFLimD-bKmJ1tGZOLYRjWzEwxkri-Mw7iFme1x2Dr0twdCeg@mail.gmail.com/
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230817231911.165035-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the ring counters are stored in the per ring datastructure.
During reset, all the rings are freed together with the associated
datastructures. As a result, all the ring error counters will be reset
to zero.
Add logic to keep track of the total error counts of all the rings
and save them before reset (including ifdown). The next patch will
display these total ring error counters under ethtool -S.
Link: https://lore.kernel.org/netdev/CACKFLimD-bKmJ1tGZOLYRjWzEwxkri-Mw7iFme1x2Dr0twdCeg@mail.gmail.com/
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230817231911.165035-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If we are doing a complete reset with irq_re_init set to true in
bnxt_close_nic(), all the ring structures will be freed. New
structures will be allocated in bnxt_open_nic(). The current code
increments rx_resets counter in bnxt_enable_napi() if bnapi->in_reset
is true. In a complete reset, bnapi->in_reset will never be true
since the structure is just allocated.
Increment the rx_resets counter in bnxt_disable_napi() instead. This
will allow us to save all the ring error counters including the
rx_resets counters in the next patch.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230817231911.165035-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the page pool's ability to maintain DMA mappings for us.
This avoids re-mapping of the recycled pages.
Link: https://lore.kernel.org/netdev/20230728231829.235716-4-michael.chan@broadcom.com/
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230817231911.165035-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert to use the page pool buffers for the aggregation ring when
running in non-XDP mode. This simplifies the driver and we benefit
from the recycling of pages. Adjust the page pool size to account
for the aggregation ring size.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230817231911.165035-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-08-17 (ice)
This series contains updates to ice driver only.
Jan removes unused functions and refactors code to make, possible,
functions static.
Jake rearranges some functions to be logically grouped.
Marcin removes an unnecessary call to disable VLAN stripping.
Yang Yingliang utilizes list_for_each_entry() helper for a couple list
traversals.
Przemek removes some parameters from ice_aq_alloc_free_res() which were
always the same and reworks ice_aq_wait_for_event() to reduce chance of
race.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: split ice_aq_wait_for_event() func into two
ice: embed &ice_rq_event_info event into struct ice_aq_task
ice: ice_aq_check_events: fix off-by-one check when filling buffer
ice: drop two params from ice_aq_alloc_free_res()
ice: use list_for_each_entry() helper
ice: Remove redundant VSI configuration in eswitch setup
ice: move E810T functions to before device agnostic ones
ice: refactor ice_vsi_is_vlan_pruning_ena
ice: refactor ice_ptp_hw to make functions static
ice: refactor ice_sched to make functions static
ice: Utilize assign_bit() helper
ice: refactor ice_vf_lib to make functions static
ice: refactor ice_lib to make functions static
ice: refactor ice_ddp to make functions static
ice: remove unused methods
====================
Link: https://lore.kernel.org/r/20230817212239.2601543-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The blamed commit resolved a bug where frames would still get stuck at
egress, even though they're smaller than the maxSDU[tc], because the
driver did not take into account the extra 33 ns that the queue system
needs for scheduling the frame.
It now takes that into account, but the arithmetic that we perform in
vsc9959_tas_remaining_gate_len_ps() is buggy, because we operate on
64-bit unsigned integers, so gate_len_ns - VSC9959_TAS_MIN_GATE_LEN_NS
may become a very large integer if gate_len_ns < 33 ns.
In practice, this means that we've introduced a regression where all
traffic class gates which are permanently closed will not get detected
by the driver, and we won't enable oversize frame dropping for them.
Before:
mscc_felix 0000:00:00.5: port 0: max frame size 1526 needs 12400000 ps, 1152000 ps for mPackets at speed 1000
mscc_felix 0000:00:00.5: port 0 tc 0 min gate len 1000000, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 1 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 2 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 3 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 4 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 5 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 6 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 5120 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 615 octets including FCS
After:
mscc_felix 0000:00:00.5: port 0: max frame size 1526 needs 12400000 ps, 1152000 ps for mPackets at speed 1000
mscc_felix 0000:00:00.5: port 0 tc 0 min gate len 1000000, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 5120 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 615 octets including FCS
Fixes: 11afdc6526de ("net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230817120111.3522827-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cited fixes commit introduced linecard notifications for register,
however it didn't add them for unregister. Fix that by adding them.
Fixes: c246f9b5fd61 ("devlink: add support to create line card and expose to user")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230817125240.2144794-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
VivoBook Pro 15 Ryzen Edition uses Ryzen 6800H processor, and adding to
quirks list for acp6x will enable internal mic.
Signed-off-by: BrenoRCBrito <brenorcbrito@gmail.com>
Link: https://lore.kernel.org/r/20230818211417.32167-1-brenorcbrito@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Return PTR_ERR_OR_ZERO() instead of return 0 or PTR_ERR() to
simplify code.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230817022418.3588831-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since debugfs_create_dir() returns ERR_PTR, IS_ERR() is enough to
check whether the directory is successfully created. So remove the
redundant NULL check.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230817073017.350002-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On SDP interfaces, frame oversize and undersize errors are
observed as driver is not considering packet sizes of all
subscribers of the link before updating the link config.
This patch fixes the same.
Fixes: 9b7dd87ac071 ("octeontx2-af: Support to modify min/max allowed packet lengths")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230817063006.10366-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
do_pci_disable_device() disable PCI bus-mastering as following:
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}
And pci_disable_device() sets dev->is_busmaster to 0.
pci_enable_device() is called only once before calling to
pci_disable_device() and such pci_clear_master() is not needed. So remove
redundant pci_clear_master().
Also rename goto label 'err_out_clear_master' to 'err_out_disable_device'.
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20230817025709.2023553-1-liaoyu15@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
virtchnl: fix fake 1-elem arrays
Alexander Lobakin says:
6.5-rc1 started spitting warning splats when composing virtchnl
messages, precisely on virtchnl_rss_key and virtchnl_lut:
[ 84.167709] memcpy: detected field-spanning write (size 52) of single
field "vrk->key" at drivers/net/ethernet/intel/iavf/iavf_virtchnl.c:1095
(size 1)
[ 84.169915] WARNING: CPU: 3 PID: 11 at drivers/net/ethernet/intel/
iavf/iavf_virtchnl.c:1095 iavf_set_rss_key+0x123/0x140 [iavf]
...
[ 84.191982] Call Trace:
[ 84.192439] <TASK>
[ 84.192900] ? __warn+0xc9/0x1a0
[ 84.193353] ? iavf_set_rss_key+0x123/0x140 [iavf]
[ 84.193818] ? report_bug+0x12c/0x1b0
[ 84.194266] ? handle_bug+0x42/0x70
[ 84.194714] ? exc_invalid_op+0x1a/0x50
[ 84.195149] ? asm_exc_invalid_op+0x1a/0x20
[ 84.195592] ? iavf_set_rss_key+0x123/0x140 [iavf]
[ 84.196033] iavf_watchdog_task+0xb0c/0xe00 [iavf]
...
[ 84.225476] memcpy: detected field-spanning write (size 64) of single
field "vrl->lut" at drivers/net/ethernet/intel/iavf/iavf_virtchnl.c:1127
(size 1)
[ 84.227190] WARNING: CPU: 27 PID: 1044 at drivers/net/ethernet/intel/
iavf/iavf_virtchnl.c:1127 iavf_set_rss_lut+0x123/0x140 [iavf]
...
[ 84.246601] Call Trace:
[ 84.247228] <TASK>
[ 84.247840] ? __warn+0xc9/0x1a0
[ 84.248263] ? iavf_set_rss_lut+0x123/0x140 [iavf]
[ 84.248698] ? report_bug+0x12c/0x1b0
[ 84.249122] ? handle_bug+0x42/0x70
[ 84.249549] ? exc_invalid_op+0x1a/0x50
[ 84.249970] ? asm_exc_invalid_op+0x1a/0x20
[ 84.250390] ? iavf_set_rss_lut+0x123/0x140 [iavf]
[ 84.250820] iavf_watchdog_task+0xb16/0xe00 [iavf]
Gustavo already tried to fix those back in 2021[0][1]. Unfortunately,
a VM can run a different kernel than the host, meaning that those
structures are sorta ABI.
However, it is possible to have proper flex arrays + struct_size()
calculations and still send the very same messages with the same sizes.
The common rule is:
elem[1] -> elem[]
size = struct_size() + <difference between the old and the new msg size>
The "old" size in the current code is calculated 3 different ways for
10 virtchnl structures total. Each commit addresses one of the ways
cumulatively instead of per-structure.
I was planning to send it to -net initially, but given that virtchnl was
renamed from i40evf and got some fat style cleanup commits in the past,
it's not very straightforward to even pick appropriate SHAs, not
speaking of automatic portability. I may send manual backports for
a couple of the latest supported kernels later on if anyone needs it
at all.
[0] https://lore.kernel.org/all/20210525230912.GA175802@embeddedor
[1] https://lore.kernel.org/all/20210525231851.GA176647@embeddedor
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
virtchnl: fix fake 1-elem arrays for structures allocated as `nents`
virtchnl: fix fake 1-elem arrays in structures allocated as `nents + 1`
virtchnl: fix fake 1-elem arrays in structs allocated as `nents + 1` - 1
====================
Link: https://lore.kernel.org/r/20230816210657.1326772-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- Remove unused declarations, by Yue Haibing
- Clean up MTU handling, by Sven Eckelmann (2 patches)
- Clean up/remove (obsolete) functions, by Sven Eckelmann (3 patches)
* tag 'batadv-next-pullrequest-20230816' of git://git.open-mesh.org/linux-merge:
batman-adv: Drop per algo GW section class code
batman-adv: Keep batadv_netlink_notify_* static
batman-adv: Drop unused function batadv_gw_bandwidth_set
batman-adv: Check hardif MTU against runtime MTU
batman-adv: Avoid magic value for minimum MTU
batman-adv: Remove unused declarations
batman-adv: Start new development cycle
====================
Link: https://lore.kernel.org/r/20230816164000.190884-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the "budget" is passed into fec_enet_tx_queue(), one
optimization we can do is to use napi_consume_skb() to instead
of dev_kfree_skb_any().
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Suggested-by: Alexander H Duyck <alexander.duyck@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230816090242.463822-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
./drivers/net/ethernet/sfc/tc_conntrack.c:464:2-3: Unneeded semicolon
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20230816004944.10841-1-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- Fix issues with adjusted MTUs (2 patches), by Sven Eckelmann
- Fix header access for memory reallocation case, by Remi Pommarel
- Fix two memory leaks (2 patches), by Remi Pommarel
* tag 'batadv-net-pullrequest-20230816' of git://git.open-mesh.org/linux-merge:
batman-adv: Fix batadv_v_ogm_aggr_send memory leak
batman-adv: Fix TT global entry leak when client roamed back
batman-adv: Do not get eth header before batadv_check_management_packet
batman-adv: Don't increase MTU when set by user
batman-adv: Trigger events for auto adjusted MTU
====================
Link: https://lore.kernel.org/r/20230816163318.189996-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
