summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-14arm64: kgdb: Set PSTATE.SS to 1 to re-enable single-stepSumit Garg
Currently only the first attempt to single-step has any effect. After that all further stepping remains "stuck" at the same program counter value. Refer to the ARM Architecture Reference Manual (ARM DDI 0487E.a) D2.12, PSTATE.SS=1 should be set at each step before transferring the PE to the 'Active-not-pending' state. The problem here is PSTATE.SS=1 is not set since the second single-step. After the first single-step, the PE transferes to the 'Inactive' state, with PSTATE.SS=0 and MDSCR.SS=1, thus PSTATE.SS won't be set to 1 due to kernel_active_single_step()=true. Then the PE transferes to the 'Active-pending' state when ERET and returns to the debugger by step exception. Before this patch: ================== Entering kdb (current=0xffff3376039f0000, pid 1) on processor 0 due to Keyboard Entry [0]kdb> [0]kdb> [0]kdb> bp write_sysrq_trigger Instruction(i) BP #0 at 0xffffa45c13d09290 (write_sysrq_trigger) is enabled addr at ffffa45c13d09290, hardtype=0 installed=0 [0]kdb> go $ echo h > /proc/sysrq-trigger Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to Breakpoint @ 0xffffad651a309290 [1]kdb> ss Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to SS trap @ 0xffffad651a309294 [1]kdb> ss Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to SS trap @ 0xffffad651a309294 [1]kdb> After this patch: ================= Entering kdb (current=0xffff6851c39f0000, pid 1) on processor 0 due to Keyboard Entry [0]kdb> bp write_sysrq_trigger Instruction(i) BP #0 at 0xffffc02d2dd09290 (write_sysrq_trigger) is enabled addr at ffffc02d2dd09290, hardtype=0 installed=0 [0]kdb> go $ echo h > /proc/sysrq-trigger Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to Breakpoint @ 0xffffc02d2dd09290 [1]kdb> ss Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd09294 [1]kdb> ss Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd09298 [1]kdb> ss Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd0929c [1]kdb> Fixes: 44679a4f142b ("arm64: KGDB: Add step debugging support") Co-developed-by: Wei Li <liwei391@huawei.com> Signed-off-by: Wei Li <liwei391@huawei.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Tested-by: Douglas Anderson <dianders@chromium.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> Link: https://lore.kernel.org/r/20230202073148.657746-3-sumit.garg@linaro.org Signed-off-by: Will Deacon <will@kernel.org>
2023-04-14io_uring: complete request via task work in case of DEFER_TASKRUNMing Lei
So far io_req_complete_post() only covers DEFER_TASKRUN by completing request via task work when the request is completed from IOWQ. However, uring command could be completed from any context, and if io uring is setup with DEFER_TASKRUN, the command is required to be completed from current context, otherwise wait on IORING_ENTER_GETEVENTS can't be wakeup, and may hang forever. The issue can be observed on removing ublk device, but turns out it is one generic issue for uring command & DEFER_TASKRUN, so solve it in io_uring core code. Fixes: e6aeb2721d3b ("io_uring: complete all requests in task context") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-block/b3fc9991-4c53-9218-a8cc-5b4dd3952108@kernel.dk/ Reported-by: Jens Axboe <axboe@kernel.dk> Cc: Kanchan Joshi <joshi.k@samsung.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-14Merge tag 'qcom-drivers-for-6.4' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers Qualcomm driver updates for v6.4 The Qualcomm SCM driver will now always clear the download bit, avoiding entering download mode on a clean reboot because the bootloader left it set. The vmid bitmap passed to qcom_scm_assign_mem() is transitioned to a well defined size. SM6375 support is added, and SC8180X, QDU1000/QRU1000, IPQ5332 and IPQ9574 compatibles are documented. GENI gains support for newer hardware with deeper FIFOs. The BWMON driver is updated to better handle the two register blocks, which are not consistent between MSM8998 and newer platforms. The LLCC driver no longer assumes a fixes stride across the various banks, and instead acquire the bank placement from DeviceTree. EDAC support for polling is introduced. EDAC support on SDM845 is disabled, as its been observed that accessing relevant registers is not permitted on most devices. PMIC GLINK is reworked to support defining which auxiliary children to spawn per platform, support for spawning a UCSI child is added and SM8450 and SM8550 is introduced. The RPM power-domain driver is cleaned up by moving and generalizing structures that are common between platforms, rather than duplicating everything. Macros are replaced with just direct definition of the relevant structures. Support for defining parent relationships between the power-domains is introduced, like it has been in rpmhpd for a long time. Number of processors has gone up, so max processor count in SMEM is bumped again. Error handling in SMSM is cleaned up using dev_err_probe(). Socinfo is taught about IPQ9574, QCM2290, QRB2210, QRB4210, SM7150, SA8775P and a number of PMICs. * tag 'qcom-drivers-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (51 commits) dt-bindings: firmware: document Qualcomm SC8180X SCM dt-bindings: sram: qcom,imem: document SM6375 IMEM soc: qcom: icc-bwmon: Handle global registers correctly soc: qcom: icc-bwmon: Remove unused struct member soc: qcom: smsm: Use dev_err_probe() firmware: qcom_scm: Add SM6375 compatible soc: qcom: llcc: Add configuration data for SM7150 dt-bindings: arm: msm: Add LLCC for SM7150 dt-bindings: soc: qcom: smd-rpm: re-add missing qcom,rpm-msm8994 soc: qcom: pmic_glink: register ucsi aux device dt-bindings: soc: qcom: qcom,pmic-glink: document SM8550 compatible dt-bindings: soc: qcom: qcom,pmic-glink: document SM8450 compatible firmware: qcom_scm: Clear download bit during reboot dt-bindings: soc: qcom: aoss: Document QDU1000/QRU1000 compatible dt-bindings: firmware: qcom,scm: Update QDU1000/QRU1000 compatible dt-bindings: soc: qcom: smd-rpm: Add IPQ9574 compatible firmware: qcom_scm: Use fixed width src vm bitmap dt-bindings: firmware: qcom,scm: document IPQ5332 SCM dt-bindings: scm: Add compatible for IPQ9574 soc: qcom: rpmpd: Remove useless comments ... Link: https://lore.kernel.org/r/20230410152421.4477-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'ti-driver-soc-for-v6.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers TI SoC driver updates for v6.4 * Minor fixups for of_property, using devm_platform_ioremap * Fixups for refcount leaks in pm33xx * Fixups for k3-ringacc for dmaring_request * SoCinfo detection for J784S4 SoC. * tag 'ti-driver-soc-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: soc: ti: Use devm_platform_ioremap_resource() soc: ti: k3-socinfo: Add entry for J784S4 SOC soc: ti: Use of_property_read_bool() for boolean properties soc: ti: Use of_property_present() for testing DT property presence soc: ti: pm33xx: Fix refcount leak in am33xx_pm_probe soc: ti: k3-ringacc: Add try_module_get() to k3_dmaring_request_dual_ring() Link: https://lore.kernel.org/r/20230410140506.ucvkwq7vz2h47vyj@stipulate Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14bcma: Add explicit of_device.h includeRob Herring
bcma/main.c uses of_dma_configure() which is declared in of_device.h. of_device.h gets implicitly included by of_platform.h, but that is going to be removed soon. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230410232701.1561613-1-robh@kernel.org
2023-04-14Merge tag 'renesas-drivers-for-v6.4-tag2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/drivers Renesas driver updates for v6.4 (take two) - Add "renesas," file contents pattern to MAINTAINERS, - Fix a small leak on OOM. * tag 'renesas-drivers-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: soc: renesas: renesas-soc: Release 'chipid' from ioremap() MAINTAINERS: renesas: Add "renesas," file contents pattern Link: https://lore.kernel.org/r/cover.1681113115.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge branch 'md-next' of ↵Jens Axboe
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.4/block Pull MD updates from Song: "- md/bitmap: Optimal last page size, by Jon Derrick - Various raid10 fixes, by Yu Kuai and Li Nan - md: add error_handlers for raid0 and linear, by Mariusz Tkaczyk" * 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md/raid5: remove unused working_disks variable md/raid10: don't call bio_start_io_acct twice for bio which experienced read error md/raid10: fix memleak of md thread md/raid10: fix memleak for 'conf->bio_split' md/raid10: fix leak of 'r10bio->remaining' for recovery md/raid10: don't BUG_ON() in raise_barrier() md: fix soft lockup in status_resync md: add error_handlers for raid0 and linear md: Use optimal I/O size for last bitmap page md: Fix types in sb writer md: Move sb writer loop to its own function md/raid10: Fix typo in comment (replacment -> replacement) md: make kobj_type structures constant md/raid10: fix null-ptr-deref in raid10_sync_request md/raid10: fix task hung in raid10d
2023-04-14Merge tag 'sunxi-drivers-for-6.4-1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/drivers - remove MODULE_LICENSE from sram driver - use of_property_present() in mbus driver * tag 'sunxi-drivers-for-6.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: kbuild, soc: sunxi: sram: remove MODULE_LICENSE in non-modules soc: sunxi: Use of_property_present() for testing DT property presence Link: https://lore.kernel.org/r/20230408125255.GA17134@jernej-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14wifi: rtl8xxxu: Support devices with 5-6 out endpointsBitterblue Smith
Handle them the same way as the devices with 3-4 USB out endpoints. This is needed for the RTL8192FU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/ef4bc66d-84f5-4021-efd7-1787d097519c@gmail.com
2023-04-14wifi: rtl8xxxu: Clean up some messy ifsBitterblue Smith
Add some new members to rtl8xxxu_fileops and use them instead of checking priv->rtl_chip. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/e24a5534-6e33-cfb9-0634-0caf4646513f@gmail.com
2023-04-14Merge tag 'nvme-6.4-2023-04-14' of git://git.infradead.org/nvme into ↵Jens Axboe
for-6.4/block Pull NVMe updates from Christoph: "nvme updates for Linux 6.4 - drop redundant pci_enable_pcie_error_reporting (Bjorn Helgaas) - validate nvmet module parameters (Chaitanya Kulkarni) - fence TCP socket on receive error (Chris Leech) - fix async event trace event (Keith Busch) - minor cleanups (Chaitanya Kulkarni, zhenwei pi) - fix and cleanup nvmet Identify handling (Damien Le Moal, Christoph Hellwig) - fix double blk_mq_complete_request race in the timeout handler (Lei Yin) - fix irq locking in nvme-fcloop (Ming Lei) - remove queue mapping helper for rdma devices (Sagi Grimberg)" * tag 'nvme-6.4-2023-04-14' of git://git.infradead.org/nvme: nvme-fcloop: fix "inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage" blk-mq-rdma: remove queue mapping helper for rdma devices nvme-rdma: minor cleanup in nvme_rdma_create_cq() nvme: fix double blk_mq_complete_request for timeout request with low probability nvme: fix async event trace event nvme-apple: return directly instead of else nvme-apple: return directly instead of else nvmet-tcp: validate idle poll modparam value nvmet-tcp: validate so_priority modparam value nvme-tcp: fence TCP socket on receive error nvmet: remove nvmet_req_cns_error_complete nvmet: rename nvmet_execute_identify_cns_cs_ns nvmet: fix Identify Identification Descriptor List handling nvmet: cleanup nvmet_execute_identify() nvmet: fix I/O Command Set specific Identify Controller nvmet: fix Identify Active Namespace ID list handling nvmet: fix Identify Controller handling nvmet: fix Identify Namespace handling nvmet: fix error handling in nvmet_execute_identify_cns_cs_ns() nvme-pci: drop redundant pci_enable_pcie_error_reporting()
2023-04-14Merge tag 'imx-drivers-6.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/drivers i.MX drivers update for 6.4: - Use dev_err_probe() for imx-scu driver to silences EPROBE_DEFER messages. - Add LVDS LPI2C and PWM power domains for scu-pd driver. - A series from Jindong Yue to support module build of imx8m soc driver. - Update imx8m-blk-ctrl driver to scan child nodes for binding drivers. - Reorder structure members in imx8m-blk-ctrl driver by following clang-analyzer suggestion. - Update imx-weim bus driver to use helper function for "ranges" parsing. * tag 'imx-drivers-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: imx8m-blk-ctrl: reordering the fields soc: imx8m: Support building imx8m soc driver as module soc: imx8m: Add MODULE_LICENSE soc: imx: imx8m-blk-ctrl: Add MODULE_LICENSE soc: imx: imx8m-blk-ctrl: Use dev_pm_domain_attach_by_name soc: imx: imx8mp-blk-ctrl: Add MODULE_LICENSE soc: imx: imx8mp-blk-ctrl: Fix typo of imx8m_blk_ctrl_of_match soc: imx: imx8mp-blk-ctrl: Use dev_pm_domain_attach_by_name soc: imx: imx8m-blk-ctrl: Scan subnodes and bind drivers to them firmware: imx: scu-pd: add missed lvds lpi2c and pwm power domains bus: imx-weim: Remove open coded "ranges" parsing firmware: imx: scu: use dev_err_probe Link: https://lore.kernel.org/r/20230408101928.280271-1-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14wifi: brcmfmac: add Cypress 43439 SDIO idsMarek Vasut
Add SDIO ids for use with the muRata 1YN (Cypress CYW43439). The odd thing about this is that the previous 1YN populated on M.2 card for evaluation purposes had BRCM SDIO vendor ID, while the chip populated on real hardware has a Cypress one. The device ID also differs between the two devices. But they are both 43439 otherwise, so add the IDs for both. On-device 1YN (43439), the new one, chip label reads "1YN": ``` /sys/.../mmc_host/mmc2/mmc2:0001 # cat vendor device 0x04b4 0xbd3d ``` EA M.2 evaluation board 1YN (43439), the old one, chip label reads "1YN ES1.4": ``` /sys/.../mmc_host/mmc0/mmc0:0001/# cat vendor device 0x02d0 0xa9a6 ``` Reviewed-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230407203752.128539-1-marex@denx.de
2023-04-14Merge tag 'riscv-soc-for-v6.4' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers RISC-V SoC drivers for v6.4 Microchip: Mailbox controller & client changes for the system controller on PolarFire SoC. The controller bits have been acked by Jassi. Primarily the changes work around a "hardware" bug (really the system controller's software, but it may as well be hardware as customers cannot change it) where interrupts are not generated if a service fails. The mailbox controller driver is tweaked to use polling, rather than interrupt, mode and there are some changes to timeout code required in the client driver as a result. There's some opportunistic cleanup that I performed while doing the swap too. Canaan: A single fix for some randconfig issues that crop up when !mmu is enabled for 32-bit kernels, due to my changes in a previous release that swapped out select based entablement of the driver. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-soc-for-v6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: soc: microchip: mpfs: add a prefix to rx_callback() soc: microchip: mpfs: handle timeouts and failed services differently soc: microchip: mpfs: simplify error handling in mpfs_blocking_transaction() soc: microchip: mpfs: use a consistent completion timeout soc: microchip: mpfs: fix some horrible alignment mailbox: mpfs: check the service status in .tx_done() mailbox: mpfs: ditch a useless busy check mailbox: mpfs: switch to txdone_poll mailbox: mpfs: fix an incorrect mask width soc: canaan: Make K210_SYSCTL depend on CLK_K210 Link: https://lore.kernel.org/r/20230406-islamist-mop-81d651b8830d@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge branch 'nvme-6.3' of git://git.infradead.org/nvme into block-6.3Jens Axboe
Pull NVMe fix from Christoph. * 'nvme-6.3' of git://git.infradead.org/nvme: nvme-pci: add NVME_QUIRK_BOGUS_NID for T-FORCE Z330 SSD
2023-04-14wifi: rtw89: fix crash due to null pointer of sta in AP modePing-Ke Shih
In AP mode, 'sta' could be NULL if sending broadcast/multicast packets, so we should check before accessing, or it causes crash: BUG: kernel NULL pointer dereference, address: 0000000000000004 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 2 PID: 92 Comm: kworker/u33:0 Tainted: G OE Workqueue: rtw89_tx_wq rtw89_core_txq_work [rtw89_core] RIP: 0010:rtw89_core_tx_update_desc_info+0x2cc/0x7d0 [rtw89_core] Code: e2 01 41 be 04 00 00 00 41 8b 84 c4 0c 01 00 00 75 0d 45 31 f6 ... RSP: 0018:ffffb4cf807afce0 EFLAGS: 00010297 RAX: 0000000000000001 RBX: ffffb4cf807afd48 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 RBP: ffffb4cf807afd30 R08: ffff9b28c1e59808 R09: ffff9b28c0297100 R10: 00000000052cf7c4 R11: 00000000052cf7c4 R12: ffff9b28c1602040 R13: ffff9b28c07b3000 R14: 0000000000000004 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9b2a73280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000004 CR3: 00000001ca410003 CR4: 00000000000606e0 Call Trace: <TASK> rtw89_core_tx_write+0x7c/0x100 [rtw89_core] rtw89_core_txq_work+0x1b4/0x530 [rtw89_core] process_one_work+0x222/0x3f0 worker_thread+0x50/0x3f0 kthread+0x16b/0x190 ? rescuer_thread+0x3a0/0x3a0 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x22/0x30 </TASK> Fixes: e5307c9cd7ee ("wifi: rtw89: set data lowest rate according to AP supported rate") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230406093009.5869-1-pkshih@realtek.com
2023-04-14wifi: rtw89: correct 5 MHz mask settingEric Huang
Use primary channel index to determine which 5 MHz mask should be enable. This mask is used to prevent noise from channel edge to effect CCA threshold in wide bandwidth (>= 40 MHZ). Fixes: 1b00e9236a71 ("rtw89: 8852c: add set channel of BB part") Fixes: 6b0698984eb0 ("wifi: rtw89: 8852b: add chip_ops::set_channel") Cc: stable@vger.kernel.org Signed-off-by: Eric Huang <echuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230406072841.8308-1-pkshih@realtek.com
2023-04-14wifi: rtw89: 8851b: add tables for RFKPing-Ke Shih
These tables are used by RF calibrations to assist to configure PHY and RF registers. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230401142548.55466-4-pkshih@realtek.com
2023-04-14wifi: rtw89: 8851b: add BB and RF tables (2 of 2)Ping-Ke Shih
These tables contain BB and RF parameters that driver will load them into registers. It also contains TX power according to country, band, rate and so on. Increasing thermal can cause TX power degraded, so power tracking tables are defined to compensate TX power. Internal version of these tables: - HALBB_029_106_15 (V17) - HALRF_029_00_089 * Radio A 0x22 * NCTL 0x5 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230401142548.55466-3-pkshih@realtek.com
2023-04-14wifi: rtw89: 8851b: add BB and RF tables (1 of 2)Ping-Ke Shih
These tables contain BB and RF parameters that driver will load them into registers. It also contains TX power according to country, band, rate and so on. Increasing thermal can cause TX power degraded, so power tracking tables are defined to compensate TX power. Internal version of these tables: - HALBB_029_106_15 (V17) - HALRF_029_00_089 * Radio A 0x22 * NCTL 0x5 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230401142548.55466-2-pkshih@realtek.com
2023-04-14wifi: rtw89: pci: update PCI related settings to support 8851BPing-Ke Shih
Many settings of 8851B are like 8852A or 8852B. Change them to proper settings as hardware design. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230330133324.19538-5-pkshih@realtek.com
2023-04-14wifi: rtw89: mac: update MAC settings to support 8851bPing-Ke Shih
Many settings of 8851B are the same as 8852B or 8852A, like DLE (Data link engine), security engine and so on. Update them according to hardware design. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230330133324.19538-4-pkshih@realtek.com
2023-04-14wifi: rtw89: 8851b: fix TX path to path A for one RF path chipPing-Ke Shih
For two RF paths chips, we normally set path B as main path by default. 8851B has single one RF path, so set TX path to A and set mapping of path B to 0. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230330133324.19538-3-pkshih@realtek.com
2023-04-14wifi: rtw89: read version of analog hardwarePing-Ke Shih
The chip contains digital and analog parts, and each of them has its own version number. This is used by BT coexistence mechanism to make strategy decision for different analog version. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230330133324.19538-2-pkshih@realtek.com
2023-04-14wifi: rtw89: use hardware CFO to improve performanceEric Huang
Turn on hardware CFO (central frequency offset) compensation based on IC capability, and improve digital CFO compensation accuracy by using more fixed points number. Signed-off-by: Eric Huang <echuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230330132352.13647-1-pkshih@realtek.com
2023-04-14wifi: rtw89: support parameter tables by RFE typeZong-Zhe Yang
One chip can have different RFE (RF front end) types which we will judge at runtime. And, different RFE types may use different RF parameter tables. Though we didn't really meet this case previously, we are going to meet it on upcoming chip RTL8851B. So, this commit handles parameter tables for runtime RFE type. We now encapsulate rtw89_txpwr_rule_<2/5/6>ghz tables into rtw89_rfe_parms. Then, each chip defines its default parameter tables, and if needed, it can configure extra parameter tables by RFE type. Finally we determine runtime parameter tables by RFE type if one is configured. Otherwise, we use the default parameter tables. For now, we just move all settings under default parameter tables. We will configure parameter tables by RFE types in separate commits afterwards. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230330080331.37155-1-pkshih@realtek.com
2023-04-14Merge tag 'tegra-for-6.4-firmware' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers soc/tegra: Changes for v6.4-rc1 This contains minor fixes and cleanups. Note that one of the patches here includes ARM firmware changes, but I picked that up after checking with Sudeep and Rob because it didn't seem worth splitting it up any further. * tag 'tegra-for-6.4-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: firmware: Use of_property_present() for testing DT property presence firmware: tegra: bpmp: Fix error paths in debugfs Link: https://lore.kernel.org/r/20230406124804.970394-3-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'tegra-for-6.4-soc' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers soc/tegra: Changes for v6.4-rc1 Contains various minor cleanups and fixes as well as support for several more wake events on Tegra234. * tag 'tegra-for-6.4-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: fuse: Remove nvmem root only access soc/tegra: cbb: tegra194: Use of_address_count() helper soc/tegra: cbb: Remove MODULE_LICENSE in non-modules soc/tegra: flowctrl: Use devm_platform_get_and_ioremap_resource() soc: tegra: cbb: Drop empty platform remove function soc/tegra: pmc: Support software wake-up for SPE soc/tegra: pmc: Add wake source interrupt for MGBE soc/tegra: pmc: Add the PMIC wake event for Tegra234 soc/tegra: bpmp: Actually free memory on error path soc/tegra: cbb: remove linux/version.h Link: https://lore.kernel.org/r/20230406124804.970394-2-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14wifi: rtw89: add firmware format version to backward compatible with older ↵Ping-Ke Shih
drivers In the discuss threads [1] [2], new firmware format break user space because older drivers can't recognize new firmware format. To avoid this, the new format will be named rtw89/rtw8852b_fw-1.bin and only new driver try to load it. Old drivers only load original and understandable firmware rtw89/rtw8852b_fw.bin. More, new driver will be still backward compatible with old firmware, so original firmware can be used by new driver. If there is newer firmware format is introduced, rtw89/rtw8852b_fw-2.bin will be given. The same rules will be applied like above. So, we will have firmware like below in linux-firmware in the future. rtw89/rtw8852b_fw-2.bin rtw89/rtw8852b_fw-1.bin rtw89/rtw8852b_fw.bin After this patch, MODULE_FIRMWARE() of 8852A/B/C become rtw89/rtw8852a_fw.bin rtw89/rtw8852b_fw-1.bin rtw89/rtw8852c_fw.bin [1] https://lore.kernel.org/linux-wireless/df1ce994-3368-a57e-7078-8bdcccf4a1fd@gmail.com/T/#m24cb43be31a762d0ea70bf07f27ae96c59f6931b [2] https://bugzilla.kernel.org/show_bug.cgi?id=217207 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230320130606.20777-4-pkshih@realtek.com
2023-04-14wifi: rtw89: use schedule_work to request firmwarePing-Ke Shih
Since we are going to load more than one firmware and some are not presented or optional, using asynchronous API request_firmware_nowait() will become complicated. Also, we want to use firmware_request_nowarn() to avoid warning messages when loading optional files. So, use schedule_work to be simpler. To abstract loading a firmware or file, define a struct rtw89_fw_req_info containing a struct firmware and a completion to ensure this firmware is loaded completely. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230320130606.20777-3-pkshih@realtek.com
2023-04-14wifi: rtw89: fw: use generic flow to set/check featuresZong-Zhe Yang
In early feature bitmap obtained from rtw89_early_fw_feature_recognize(), the bits needed to check get increased. It's more friendly to work with RTW89_CHK_FW_FEATURE(). So, we concentrate the flow of iterating FW feature configures and calling RTW89_SET_FW_FEATURE() for various uses. And then, we adjust rtw89_early_fw_feature_recognize() for RTW89_CHK_FW_FEATURE(). Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230320130606.20777-2-pkshih@realtek.com
2023-04-14Merge tag 'tegra-for-6.4-arm-core' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers ARM: tegra: Core changes for v6.4-rc1 This contains a single commit to drop MODULE_LICENSE() from a driver that can't be built as a module since that can now confuse tooling. * tag 'tegra-for-6.4-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Remove MODULE_LICENSE in non-modules Link: https://lore.kernel.org/r/20230406124804.970394-1-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'asahi-soc-rtkit-6.4' of https://github.com/AsahiLinux/linux into ↵Arnd Bergmann
soc/drivers Apple SoC RTKit updates for 6.4. Just one bugfix and one improvement to how forwarded syslogs are sent to dmesg. * tag 'asahi-soc-rtkit-6.4' of https://github.com/AsahiLinux/linux: soc: apple: rtkit: Crop syslog messages soc: apple: rtkit: Fix buffer address field width Link: https://lore.kernel.org/r/0dbd2dc1-6a2c-5b21-354b-d8314937e8e7@marcan.st Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14wifi: rtw89: fix authentication fail during scanPo-Hao Huang
We used to store operating channel info after associated. However, scan might happen before that. Without switching back to operating channel, authentication or association might fail. Therefore, we switch back to operating channel when the scanning vif's BSSID is non-zero, which implies connected or during attempt to connect. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230411124832.14965-6-pkshih@realtek.com
2023-04-14wifi: rtw89: add flag check for power statePo-Hao Huang
Use POWER_ON flag to make sure power on/off is symmetric. Since both remain_on_channel and hw_scan both alter the power state, this makes sure that we don't enter/leave IPS mode twice. Also, replace IPS related functions with inline function that does similar logic so we can track it more easily. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230411124832.14965-5-pkshih@realtek.com
2023-04-14wifi: rtw89: add ieee80211::remain_on_channel opsPo-Hao Huang
Add support of remain on channel ops. Since channel context is required to enable multi-channel concurrent(MCC) and the current ROC in mac80211 don't support more than 1 channel context, add this to let P2P and other protocols relying on this work as expected. The off-channel duration and cancel timing is purely controlled by upper layers. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230411124832.14965-4-pkshih@realtek.com
2023-04-14wifi: rtw89: add function to wait for completion of TX skbsPo-Hao Huang
Allocate a per-skb completion to track those skbs we are interested in and wait for them to complete transmission with TX status. Normally, the completion object is freed by wait side, but it could be timeout result that complete side should free the object instead. Add a owner field with RCU to determine which side should free the object. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230411124832.14965-3-pkshih@realtek.com
2023-04-14wifi: rtw89: 8852c: add beacon filter and CQM supportPo-Hao Huang
Adding this supports beacon filter and connection quality monitor. To make host CPU wake up less, let firmware perform signal monitoring and beacon processing, then notify driver upon signal changes or beacon loss. This feature needs firmware 0.27.56 or newer to support it. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230411124832.14965-2-pkshih@realtek.com
2023-04-14Merge tag 'arm-soc/for-6.4/soc' of https://github.com/Broadcom/stblinux into ↵Arnd Bergmann
soc/arm This pull request contains ARM-based platform code changes for 6.4, please pull the following: - Rob makes use of the of_address_to_resource() helper instead of open coding it in the Kona SMC code. * tag 'arm-soc/for-6.4/soc' of https://github.com/Broadcom/stblinux: ARM: bcm: Use of_address_to_resource() Link: https://lore.kernel.org/r/20230410232606.1917803-4-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'renesas-arm-soc-for-v6.4-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/arm Renesas ARM SoC updates for v6.4 - Use of_cpu_node_to_id() to read CPU node 'reg'. * tag 'renesas-arm-soc-for-v6.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: sh-mobile: Use of_cpu_node_to_id() to read CPU node 'reg' Link: https://lore.kernel.org/r/cover.1681113113.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'imx-soc-6.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/arm i.MX SoC changes for 6.4: - A couple of changes from Oleksij Rempel which make it possible to configure Ethernet refclock from device tree. - Use common DT helpers to test DT property presence and read boolean properties. * tag 'imx-soc-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: Use of_property_read_bool() for boolean properties ARM: mxs: Use of_property_present() for testing DT property presence ARM: mach-imx: imx6ul: remove not optional ethernet refclock overwrite ARM: imx6q: skip ethernet refclock reconfiguration if enet_clk_ref is present Link: https://lore.kernel.org/r/20230408101928.280271-2-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'samsung-soc-6.4' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/arm Samsung mach/soc changes for v6.4 Cleanup of OF-related functions: use of_property_read_bool() for reading bool and of_address_to_resource() for mapping MMIO. * tag 'samsung-soc-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: EXYNOS: Use of_address_to_resource() ARM: exynos: Use of_property_read_bool() for boolean properties Link: https://lore.kernel.org/r/20230405080438.156805-3-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'tegra-for-6.4-arm64-defconfig' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/defconfig arm64: tegra: Default configuration changes for v6.4-rc1 Contains a single patch to enable the Coresight System PMU driver. * tag 'tegra-for-6.4-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: defconfig: Enable ARM CoreSight PMU driver Link: https://lore.kernel.org/r/20230406124804.970394-7-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'imx-defconfig-6.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/defconfig i.MX defconfig updates for 6.4: - Enable i.MX93 ADC driver in arm64 defconfig. - Enable BD71815 PMIC and TDA998X HDMI bridge driver in imx_v6_v7_defconfig. - Enable a few drivers support needed by Tarragon boards in imx_v6_v7_defconfig. - Build IMX_SDMA driver as module in imx_v4_v5_defconfig. * tag 'imx-defconfig-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx_v4_v5_defconfig: Build CONFIG_IMX_SDMA as module ARM: imx_v6_v7_defconfig: Enable Tarragon peripheral drivers ARM: imx_v6_v7_defconfig: Select CONFIG_DRM_I2C_NXP_TDA998X arm64: defconfig: Enable i.MX93 ADC support ARM: imx_v6_v7_defconfig: Enable rohm,bd71815 Link: https://lore.kernel.org/r/20230408101928.280271-6-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'ti-k3-config-for-v6.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/defconfig arm64: TI K3 defconfig updates for v6.4 * Enable drivers for BeaglePlay and Audio drivers for AM62-SK For this tag, Bloat-o-meter reports (17.0.0 + v6.3-rc1 base): add/remove: 61/2 grow/shrink: 3/1 up/down: 17852/-208 (17644) [...] Total: Before=27746954, After=27764598, chg +0.06% * tag 'ti-k3-config-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: arm64: defconfig: Enable audio drivers for AM62-SK arm64: defconfig: Enable drivers for BeaglePlay Link: https://lore.kernel.org/r/20230410140517.ovxnagc4xh3gqath@canary Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'qcom-arm64-defconfig-for-6.4' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig Qualcomm ARM64 defconfig updates for v6.4 This enables a range of TLMM pinctrl drivers, needed to boot related platforms. Multimedia clock drivers for MSM8994 and MSM8998 are enabled and the MSM8996 is flagged as a module instead of builtin. The PMIC_GLINK drivers are enabled, providing USB Type-C and battery support on various platforms, and eUSB2 drivers found on SM8550 are enabled. Base drivers for IPQ5332 and IPQ9574 are enabled. * tag 'qcom-arm64-defconfig-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: defconfig: Enable IPQ9574 SoC base configs arm64: defconfig: remove duplicate TYPEC_UCSI & QCOM_PMIC_GLINK arm64: defconfig: add PMIC GLINK modules arm64: defconfig: enable Qualcomm pin controller drivers arm64: defconfig: Enable qcom msm899{4,8} clk drivers arm64: defconfig: Switch msm8996 clk drivers to module arm64: defconfig: Enable QCOM eUSB2 SNPS PHY and repeater arm64: defconfig: Enable IPQ5332 SoC base configs Link: https://lore.kernel.org/r/20230410155955.5329-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14ARM: multi_v7_defconfig: Add OPTEE supportAlexandre Torgue
STM32MP13 platform relies on OPTEE to boot: Clocks and regulators are handled in the secure world by OPTEE and exported to the non secure world (LINUX) thanks to ARM SCMI protocol. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Link: https://lore.kernel.org/r/20230413072042.30657-1-alexandre.torgue@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14ARM: configs: Update U8500 defconfigLinus Walleij
Update the U8500 defconfig accordingly: - Add the NFC modules used by some U8500-based systems. - Switch out the now deleted UX500 crypto drivers to the STM32 drivers that we have augmented to work with UX500. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230405105439.1739575-1-linus.walleij@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'qcom-arm64-fixes-for-6.3-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes A few more Qualcomm ARM64 DeviceTree fixes for 6.3 The GPIO polarity of the WSA881x shutdown GPIO was inconsistent and had to be corrected in the driver, this fixes the polarity in the DeviceTree for QRB5165 RB5, SM8250 MTP, Samsung Galaxy Book 2 and Lenovo Yoga C630. The recent rearrangement of nodes among the IPQ8074 accidentally enabled the PCIe PHYs, rather than the PCIe controllers. This is being corrected, to restore PCIe functionality. PMK8280 PON node has the wrong compatible, which recently caused the driver to stop probing. This is corrected and the required "pbs" region is added. With support for HBR3 introduced, it's noted that SC7280 Herobrine devices are having trouble running at this rate. This drops the claim that it's supported, until further analysis can be done. * tag 'qcom-arm64-fixes-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: sc7280: remove hbr3 support on herobrine boards arm64: dts: qcom: sc8280xp-pmics: fix pon compatible and registers arm64: dts: qcom: ipq8074-hk10: enable QMP device, not the PHY node arm64: dts: qcom: ipq8074-hk01: enable QMP device, not the PHY node arm64: dts: qcom: qrb5165-rb5: Use proper WSA881x shutdown GPIO polarity arm64: dts: qcom: sm8250-mtp: Use proper WSA881x shutdown GPIO polarity arm64: dts: qcom: sdm850-samsung-w737: Use proper WSA881x shutdown GPIO polarity arm64: dts: qcom: sdm850-lenovo-yoga-c630: Use proper WSA881x shutdown GPIO polarity Link: https://lore.kernel.org/r/20230410153850.4752-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'v6.3-rockchip-dtsfixes1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Lower sd card speeds for two boards to make them run more reliable, missing 32k clock definition for Anbric xx3 devices, missing cache-levels for rk3588, fixed rk3326-board display supplies and more dt-schema fixes. * tag 'v6.3-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: correct panel supplies on some rk3326 boards arm64: dts: rockchip: use just "port" in panel on RockPro64 arm64: dts: rockchip: use just "port" in panel on Pinebook Pro arm64: dts: rockchip: Remove non-existing pwm-delay-us property arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices arm64: dts: rockchip: add rk3588 cache level information arm64: dts: rockchip: Lower SD card speed on rk3399 Pinebook Pro arm64: dts: rockchip: Lower sd speed on rk3566-soquartz ARM: dts: rockchip: fix a typo error for rk3288 spdif node arm64: dts: rockchip: Fix rk3399 GICv3 ITS node name Link: https://lore.kernel.org/r/10559306.CDJkKcVGEf@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit (git 2.34.1) at 2025-09-23 12:26:06 +0000