summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-08-02media: camss: csid: MIPI10 to Plain16 format conversionTodor Tomov
Use the PRDI mode on 8x96 to allow to configure RAW MIPI10 to Plain16 format conversion. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: csid: Different format support on source padTodor Tomov
Usually the format on the source pad is the same as on the sink pad. However the CSID is able to do some format conversions. To support this make the format on the source pad selectable amongst a list of formats. This list can be different for each sink pad format. This is still not used but will be when the format conversions are implemented. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: vfe: Add support for UYVY output from VFE on 8x96Todor Tomov
Add support to output UYVY formats from the VFE (via the PIX interface). A configuration for the realign module in the VFE is added. As the realign module is present on 8x96 but not on 8x16, this is supported on 8x96 only. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: vfe: Different format support on source padTodor Tomov
Rework the format selection on the source pad. Make the format on the source pad selectable amongst a list of formats. This list can be different for each sink pad format. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: Format configuration per hardware versionTodor Tomov
As the 8x16 and 8x96 support different formats, separate the arrays which contain the supported formats. For the VFE also add separate arrays for RDI and PIX subdevices. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: vfe: Add support for 8x96Todor Tomov
Add VFE hardware dependent part for 8x96. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: vfe: Split to hardware dependent and independent partsTodor Tomov
This will allow to add support for different hardware. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: ispif: Add support for 8x96Todor Tomov
ISPIF hardware modules on 8x16 and 8x96 are similar. However on 8x96 the ISPIF routes data to two VFE hardware modules. Add separate interrupt handler for 8x96 to handle the additional interrupts. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: csid: Add support for 8x96Todor Tomov
CSID hardware modules on 8x16 and 8x96 are similar. There is no need to duplicate the code by adding separate versions. Just update the register macros to return the correct register addresses. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: csiphy: Add support for 8x96Todor Tomov
Add CSIPHY hardware dependent part for 8x96. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: csiphy: Unify lane handlingTodor Tomov
Restructure lane configuration so it is simpler and will allow similar (although not the same) handling for different hardware versions. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: csiphy: Split to hardware dependent and independent partsTodor Tomov
This will allow to add support for different hardware. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> [hans.verkuil@cisco.com: remove trailing empty line] Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: Add basic runtime PM supportTodor Tomov
There is a PM domain for each of the VFE hardware modules. Add support for basic runtime PM support to be able to control the PM domains. When a PM domain needs to be powered on - a device link is created. When a PM domain needs to be powered off - its device link is removed. This allows separate and independent control of the PM domains. Suspend/Resume is still not supported. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: Add 8x96 resourcesTodor Tomov
Add structs with 8x96 resources. As the number of CSIPHY, CSID and VFE hardware modules is different on 8x16 and 8x96 select the number at runtime and allocate needed structures dynamically. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: dt-bindings: media: qcom,camss: Add 8996 bindingsTodor Tomov
Update binding document for MSM8996. CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: devicetree@vger.kernel.org Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: dt-bindings: media: qcom,camss: Fix whitespacesTodor Tomov
Use tabs. CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: devicetree@vger.kernel.org Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: vfe: Do not disable CAMIF when clearing its statusTodor Tomov
Use "no change" value when clearing CAMIF status and make sure this is done before configuring the new command. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: vfe: Get line pointer as container of video_outTodor Tomov
Simplify getting of the line pointer by using the container_of macro instead of traversing media controller links. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: vfe: Fix to_vfe() macro member nameTodor Tomov
Use the member name which is "line" instead of the pointer argument. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: csid: Configure data type and decode format properlyTodor Tomov
The CSID decodes the input data stream. When the input comes from the Test Generator the format of the stream is set on the source media pad. When the input comes from the CSIPHY the format is the one on the sink media pad. Use the proper format for each case. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: csiphy: Update settle count calculationTodor Tomov
Update settle count calculation as per specification. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: Unify the clock namesTodor Tomov
Use more logical clock names - similar to the names in documentation. This will allow better handling of the clocks in the driver when support for more hardware versions is added - equivalent clocks on different hardware versions will have the same name. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: dt-bindings: media: qcom, camss: Unify the clock namesTodor Tomov
Use more logical clock names - similar to the names in documentation. This will allow better handling of the clocks in the driver when support for more hardware versions is added - equivalent clocks on different hardware versions will have the same name. Note: No dts is using this device (and clock names) yet. CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: devicetree@vger.kernel.org Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: csiphy: Ensure clock mux config is done before the restTodor Tomov
Add a write memory barier after clock mux config and before the rest of the csiphy config. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: Fix OF node usageTodor Tomov
of_graph_get_next_endpoint increases the refcount of the returned node and decreases the refcount of the passed node. Take this into account and use of_node_put properly. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02gpu: ipu-v3: default to id 0 on missing OF aliasPhilipp Zabel
This is better than storing -ENODEV in the id number. This fixes SoCs with only one IPU that don't specify an IPU alias in the device tree. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-08-02media: camss: Use SPDX license headersTodor Tomov
Use SPDX license headers for all files of the Qualcomm CAMSS driver. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: Rename CAMSS driver pathTodor Tomov
Support for camera subsystem on QComm MSM8996/APQ8096 is to be added so remove hardware version from CAMSS driver's path. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02spi: uniphier: remove unnecessary include headersKeiji Hayashibara
This commit removed include headers of linux/of.h and linux/of_platform.h, because they are not used. Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-02media: v4l: Add new 10-bit packed grayscale formatTodor Tomov
The new format will be called V4L2_PIX_FMT_Y10P. It is similar to the V4L2_PIX_FMT_SBGGR10P family formats but V4L2_PIX_FMT_Y10P is a grayscale format. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: v4l: Add new 2X8 10-bit grayscale media bus codeTodor Tomov
The code will be called MEDIA_BUS_FMT_Y10_2X8_PADHI_LE. It is similar to MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE but MEDIA_BUS_FMT_Y10_2X8_PADHI_LE describes grayscale data. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: doc-rst: Add packed Bayer raw14 pixel formatsSakari Ailus
These formats are compressed 14-bit raw bayer formats with four different pixel orders. They are similar to 10-bit variants. The formats added by this patch are V4L2_PIX_FMT_SBGGR14P V4L2_PIX_FMT_SGBRG14P V4L2_PIX_FMT_SGRBG14P V4L2_PIX_FMT_SRGGB14P Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02ASoC: fsi: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-02ASoC: qcom: Fix unmet dependency warning for SND_SOC_SDM845Rohit kumar
Add DEPENDS_ON QCOM_APR for SND_SOC_SDM845 to fix the warning: unmet direct dependencies detected for SND_SOC_QDSP6. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-02gpu: ipu-v3: Fix U/V offset macros for planar 4:2:0Steve Longerbeam
The U and V offset macros for planar 4:2:0 (U_OFFSET, V_OFFSET, and UV_OFFSET), are not correct. The height component to the offset was calculated as: (pix->width * y / 4) But this does not produce correct offsets for odd values of y (luma line #). The luma line # must be decimated by two to produce the correct U/V line #, so the correct formula is: (pix->width * (y / 2) / 2) Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-08-02ASoC: wm8994: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 115050 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-02ASoC: wm9081: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1357430 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-02ASoC: wm8995: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 115045 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-02ASoC: wm8962: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 115043 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-02ASoC: wm8996: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 146354 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-02ASoC: wm8904: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 115042 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-02ASoC: wm8960: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 115041 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-02ASoC: wm8955: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 115047 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-02ASoC: rt5677: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1271174 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-02ASoC: rt5640: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1056547 ("Missing break in switch") Addresses-Coverity-ID: 1056548 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-02ASoC: wm8961: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1271173 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-02gpu: ipu-v3: add support for XRGB32 and XBGR32 V4L2 pixel formatsPhilipp Zabel
These should be used instead of the ill-defined deprecated RGB32 and BGR32 V4L2 pixel formats. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-08-02drm/i2c: tda998x: move tda998x_set_config() into tda998x_create()Russell King
Move the non-DT configuration of the TDA998x into tda998x_create() so that we do all setup in one place. Tested-by: Peter Rosin <peda@axentia.se> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-08-02drm/i2c: tda998x: split tda998x_encoder_dpms into enable/disablePeter Rosin
This fits better with the drm_bridge callbacks for when this driver becomes a drm_bridge. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Peter Rosin <peda@axentia.se> [edited by rmk to just split the tda998x_encoder_dpms() function and restore the double-disable protection we originally had, preserving original behaviour.] Tested-by: Peter Rosin <peda@axentia.se> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-08-02drm/i2c: tda998x: find the drm_device via the drm_connectorPeter Rosin
This prepares for being a drm_bridge which will not register the encoder. That makes the connector the better choice. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
generated by cgit (git 2.34.1) at 2025-09-19 09:35:19 +0000