| Age | Commit message (Collapse) | Author |
|---|
|
Currently the shipped platforms use only _HID to distinguish
ljca children devices. The _ADR support here is for future HW.
This patch is to drop _ADR support and we can then re-introduce
it (revert this patch) if future HW actually starts using _ADR
to distinguish children devices.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231114072531.1366753-1-wentong.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The interrupt service routine registered for the gadget is a primary
handler which mask the interrupt source and a threaded handler which
handles the source of the interrupt. Since the threaded handler is
voluntary threaded, the IRQ-core does not disable bottom halves before
invoke the handler like it does for the forced-threaded handler.
Due to changes in networking it became visible that a network gadget's
completions handler may schedule a softirq which remains unprocessed.
The gadget's completion handler is usually invoked either in hard-IRQ or
soft-IRQ context. In this context it is enough to just raise the softirq
because the softirq itself will be handled once that context is left.
In the case of the voluntary threaded handler, there is nothing that
will process pending softirqs. Which means it remain queued until
another random interrupt (on this CPU) fires and handles it on its exit
path or another thread locks and unlocks a lock with the bh suffix.
Worst case is that the CPU goes idle and the NOHZ complains about
unhandled softirqs.
Disable bottom halves before acquiring the lock (and disabling
interrupts) and enable them after dropping the lock. This ensures that
any pending softirqs will handled right away.
cc: stable@vger.kernel.org
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20231108093125.224963-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
TCPM checks for sink caps operational current even when PD is disabled.
This incorrectly sets tcpm_set_charge() when PD is disabled.
Check for sink caps only when PD is enabled.
[ 97.572342] Start toggling
[ 97.578949] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
[ 99.571648] CC1: 0 -> 0, CC2: 0 -> 4 [state TOGGLING, polarity 0, connected]
[ 99.571658] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS]
[ 99.571673] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS]
[ 99.741778] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
[ 99.789283] CC1: 0 -> 0, CC2: 4 -> 5 [state SNK_DEBOUNCED, polarity 0, connected]
[ 99.789306] state change SNK_DEBOUNCED -> SNK_DEBOUNCED [rev3 NONE_AMS]
[ 99.903584] VBUS on
[ 99.903591] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS]
[ 99.903600] polarity 1
[ 99.910155] enable vbus discharge ret:0
[ 99.910160] Requesting mux state 1, usb-role 2, orientation 2
[ 99.946791] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS]
[ 99.946798] state change SNK_STARTUP -> SNK_DISCOVERY [rev3 NONE_AMS]
[ 99.946800] Setting voltage/current limit 5000 mV 500 mA
[ 99.946803] vbus=0 charge:=1
[ 100.027139] state change SNK_DISCOVERY -> SNK_READY [rev3 NONE_AMS]
[ 100.027145] Setting voltage/current limit 5000 mV 3000 mA
[ 100.466830] VBUS on
Cc: stable@vger.kernel.org
Fixes: 803b1c8a0cea ("usb: typec: tcpm: not sink vbus if operational current is 0mA")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20231101012845.2701348-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The default mode, configurable by DT, shall be set before usb role switch
driver is registered. Otherwise there is a race between default mode
and mode set by usb role switch driver.
Fixes: 98ed256a4dbad ("usb: dwc3: Add support for role-switch-default-mode binding")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20231025095110.2405281-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All error handling end to the error handling path, except these ones.
Go to 'release_fw' as well here, otherwise 'fw' is leaking.
Fixes: 7e7a3c815d22 ("USB: typec: tps6598x: Add TPS25750 support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/23168336f18a9f6cb1a5b47130fc134dc0510d7f.1698648980.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Hard reset queued prior to error recovery (or) received during
error recovery will make TCPM to prematurely exit error recovery
sequence. Ignore hard resets received during error recovery (or)
port reset sequence.
```
[46505.459688] state change SNK_READY -> ERROR_RECOVERY [rev3 NONE_AMS]
[46505.459706] state change ERROR_RECOVERY -> PORT_RESET [rev3 NONE_AMS]
[46505.460433] disable vbus discharge ret:0
[46505.461226] Setting usb_comm capable false
[46505.467244] Setting voltage/current limit 0 mV 0 mA
[46505.467262] polarity 0
[46505.470695] Requesting mux state 0, usb-role 0, orientation 0
[46505.475621] cc:=0
[46505.476012] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev3 NONE_AMS]
[46505.476020] Received hard reset
[46505.476024] state change PORT_RESET -> HARD_RESET_START [rev3 HARD_RESET]
```
Cc: stable@vger.kernel.org
Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Acked-by: Heikki Krogeus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231101021909.2962679-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The example host controller node has two PHYs and therefore needs two
PHY names.
Fixes: 3aa3c66aedef ("dt-bindings: usb: Bring back phy-names")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231110134802.32060-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
indirect_call_wrapper.h is not, strictly speaking, networking specific.
However, it's git history indicates that in practice changes go through
netdev and thus the netdev maintainers have effectively been taking
responsibility for it.
Formalise this by adding it to the NETWORKING [GENERAL] section in the
MAINTAINERS file.
It is not clear how many other files under include/linux fall into this
category and it would be interesting, as a follow-up, to audit that and
propose further updates to the MAINTAINERS file as appropriate.
Link: https://lore.kernel.org/netdev/20231116010310.4664dd38@kernel.org/
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231120-indirect_call_wrapper-maintainer-v1-1-0a6bb1f7363e@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit 9d1bd9346241cd6963b58da7ffb7ed303285f684.
Multiple people reported misbehaving devices and reverting this commit fixes
the problem for them. As soon as the original commit author starts reacting
again, we can try to figure out why he hasn't seen the issues (mismatching
report descriptors?), but for the time being, fix for 6.7 by reverting.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218172
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218094
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Modify the definition of the two Fibocom FM101R-GL PID macros, which had
their PIDs switched.
The correct PIDs are:
- VID:PID 413C:8213, FM101R-GL ESIM are laptop M.2 cards (with
MBIM interfaces for Linux)
- VID:PID 413C:8215, FM101R-GL are laptop M.2 cards (with
MBIM interface for Linux)
0x8213: mbim, tty
0x8215: mbim, tty
Signed-off-by: Puliang Lu <puliang.lu@fibocom.com>
Fixes: 52480e1f1a25 ("USB: serial: option: add Fibocom to DELL custom modem FM101R-GL")
Link: https://lore.kernel.org/lkml/TYZPR02MB508845BAD7936A62A105CE5D89DFA@TYZPR02MB5088.apcprd02.prod.outlook.com/
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Interface 4 is used by for QMI interface in stock firmware of MF28D, the
router which uses MF290 modem. Free the interface up, to rebind it to
qmi_wwan driver.
The proper configuration is:
Interface mapping is:
0: QCDM, 1: (unknown), 2: AT (PCUI), 2: AT (Modem), 4: QMI
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=19d2 ProdID=0189 Rev= 0.00
S: Manufacturer=ZTE, Incorporated
S: Product=ZTE LTE Technologies MSM
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
Cc: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
When running perf-stat command on Intel hybrid platform, perf-stat
reports the following errors:
sudo taskset -c 7 ./perf stat -vvvv -e cpu_atom/instructions/ sleep 1
Opening: cpu/cycles/:HG
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xa00000000
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8
sys_perf_event_open failed, error -16
Performance counter stats for 'sleep 1':
<not counted> cpu_atom/instructions/
It looks the cpu_atom/instructions/ event can't be enabled on atom PMU
even when the process is pinned on atom core. Investigation shows that
exclusive_event_init() helper always returns -EBUSY error in the perf
event creation. That's strange since the atom PMU should not be an
exclusive PMU.
Further investigation shows the issue was introduced by commit:
97588df87b56 ("perf/x86/intel: Add common intel_pmu_init_hybrid()")
The commit originally intents to clear the bit PERF_PMU_CAP_AUX_OUTPUT
from PMU capabilities if intel_cap.pebs_output_pt_available is not set,
but it incorrectly uses 'or' operation and leads to all PMU capabilities
bits are set to 1 except bit PERF_PMU_CAP_AUX_OUTPUT.
Testing this fix on Intel hybrid platforms, the observed issues
disappear.
Fixes: 97588df87b56 ("perf/x86/intel: Add common intel_pmu_init_hybrid()")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231121014628.729989-1-dapeng1.mi@linux.intel.com
|
|
Haiyang Zhang says:
====================
hv_netvsc: fix race of netvsc, VF register, and slave bit
There are some races between netvsc probe, set notifier, VF register,
and slave bit setting.
This patch set fixes them.
====================
Link: https://lore.kernel.org/r/1700411023-14317-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When a VF is being exposed form the kernel, it should be marked as "slave"
before exposing to the user-mode. The VF is not usable without netvsc
running as master. The user-mode should never see a VF without the "slave"
flag.
This commit moves the code of setting the slave flag to the time before
VF is exposed to user-mode.
Cc: stable@vger.kernel.org
Fixes: 0c195567a8f6 ("netvsc: transparent VF management")
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If VF NIC is registered earlier, NETDEV_REGISTER event is replayed,
but NETDEV_POST_INIT is not.
Move register_netdevice_notifier() earlier, so the call back
function is set before probing.
Cc: stable@vger.kernel.org
Fixes: e04e7a7bbd4b ("hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()")
Reported-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The rtnl lock also needs to be held before rndis_filter_device_add()
which advertises nvsp_2_vsc_capability / sriov bit, and triggers
VF NIC offering and registering. If VF NIC finished register_netdev()
earlier it may cause name based config failure.
To fix this issue, move the call to rtnl_lock() before
rndis_filter_device_add(), so VF will be registered later than netvsc
/ synthetic NIC, and gets a name numbered (ethX) after netvsc.
Cc: stable@vger.kernel.org
Fixes: e04e7a7bbd4b ("hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()")
Reported-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
net/ipv4/route.c:783:46: warning: incorrect type in argument 2 (different base types)
net/ipv4/route.c:783:46: expected unsigned int [usertype] key
net/ipv4/route.c:783:46: got restricted __be32 [usertype] new_gw
Fixes: 969447f226b4 ("ipv4: use new_gw for redirect neigh lookup")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://lore.kernel.org/r/20231119141759.420477-1-chentao@kylinos.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since the edid_firmware module parameter was moved from
drm_kms_helper.ko to drm.ko in v4.15, we've had a backwards
compatibility helper in place, with a DRM_NOTE() suggesting to migrate
to drm.edid_firmware. This was added in commit ac6c35a4d8c7 ("drm: add
backwards compatibility support for drm_kms_helper.edid_firmware").
More than five years and 30+ kernel releases later, drop the backward
compatibility.
v2: Drop the warnings too
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114151406.61230-1-jani.nikula@intel.com
|
|
The driver only frees the reserved irq if priv->irq_enabled is set to
true. However, the driver mistakenly sets priv->irq_enabled to false,
instead of true, in tilcdc_irq_install(), and thus the driver never
frees the irq, causing issues on loading the driver a second time.
Fixes: b6366814fa77 ("drm/tilcdc: Convert to Linux IRQ interfaces")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919-lcdc-v1-1-ba60da7421e1@ideasonboard.com
|
|
These devices disconnect if suspended without remote wakeup. They can operate
with the standard driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Many user-space compositors fail with mode setting if a CRTC has
more than one connected connector. This is the case with the BMC
on Aspeed systems. Work around this problem by setting the BMC's
connector status to disconnected when the physical connector has
a display attached. This way compositors will only see one connected
connector at a time; either the physical one or the BMC.
Suggested-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes: e329cb53b45d ("drm/ast: Add BMC virtual connector")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org> # v6.6+
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116130217.22931-1-tzimmermann@suse.de
|
|
The Glorious Model I mouse has a buggy HID report descriptor for its
keyboard endpoint (used for programmable buttons). For report ID 2, there
is a mismatch between Logical Minimum and Usage Minimum in the array that
reports keycodes.
The offending portion of the descriptor: (from hid-decode)
0x95, 0x05, // Report Count (5) 30
0x75, 0x08, // Report Size (8) 32
0x15, 0x00, // Logical Minimum (0) 34
0x25, 0x65, // Logical Maximum (101) 36
0x05, 0x07, // Usage Page (Keyboard) 38
0x19, 0x01, // Usage Minimum (1) 40
0x29, 0x65, // Usage Maximum (101) 42
0x81, 0x00, // Input (Data,Arr,Abs) 44
This bug shifts all programmed keycodes up by 1. Importantly, this causes
"empty" array indexes of 0x00 to be interpreted as 0x01, ErrorRollOver.
The presence of ErrorRollOver causes the system to ignore all keypresses
from the endpoint and breaks the ability to use the programmable buttons.
Setting byte 41 to 0x00 fixes this, and causes keycodes to be interpreted
correctly.
Also, USB_VENDOR_ID_GLORIOUS is changed to USB_VENDOR_ID_SINOWEALTH,
and a new ID for Laview Technology is added. Glorious seems to be
white-labeling controller boards or mice from these vendors. There isn't a
single canonical vendor ID for Glorious products.
Signed-off-by: Brett Raye <braye@fastmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
hid_debug_events_release releases resources bound to the HID device instance.
hid_device_release releases the underlying HID device instance potentially
before hid_debug_events_release has completed releasing debug resources bound
to the same HID device instance.
Reference count to prevent the HID device instance from being torn down
preemptively when HID debugging support is used. When count reaches zero,
release core resources of HID device instance using hiddev_free.
The crash:
[ 120.728477][ T4396] kernel BUG at lib/list_debug.c:53!
[ 120.728505][ T4396] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 120.739806][ T4396] Modules linked in: bcmdhd dhd_static_buf 8822cu pcie_mhi r8168
[ 120.747386][ T4396] CPU: 1 PID: 4396 Comm: hidt_bridge Not tainted 5.10.110 #257
[ 120.754771][ T4396] Hardware name: Rockchip RK3588 EVB4 LP4 V10 Board (DT)
[ 120.761643][ T4396] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--)
[ 120.768338][ T4396] pc : __list_del_entry_valid+0x98/0xac
[ 120.773730][ T4396] lr : __list_del_entry_valid+0x98/0xac
[ 120.779120][ T4396] sp : ffffffc01e62bb60
[ 120.783126][ T4396] x29: ffffffc01e62bb60 x28: ffffff818ce3a200
[ 120.789126][ T4396] x27: 0000000000000009 x26: 0000000000980000
[ 120.795126][ T4396] x25: ffffffc012431000 x24: ffffff802c6d4e00
[ 120.801125][ T4396] x23: ffffff8005c66f00 x22: ffffffc01183b5b8
[ 120.807125][ T4396] x21: ffffff819df2f100 x20: 0000000000000000
[ 120.813124][ T4396] x19: ffffff802c3f0700 x18: ffffffc01d2cd058
[ 120.819124][ T4396] x17: 0000000000000000 x16: 0000000000000000
[ 120.825124][ T4396] x15: 0000000000000004 x14: 0000000000003fff
[ 120.831123][ T4396] x13: ffffffc012085588 x12: 0000000000000003
[ 120.837123][ T4396] x11: 00000000ffffbfff x10: 0000000000000003
[ 120.843123][ T4396] x9 : 455103d46b329300 x8 : 455103d46b329300
[ 120.849124][ T4396] x7 : 74707572726f6320 x6 : ffffffc0124b8cb5
[ 120.855124][ T4396] x5 : ffffffffffffffff x4 : 0000000000000000
[ 120.861123][ T4396] x3 : ffffffc011cf4f90 x2 : ffffff81fee7b948
[ 120.867122][ T4396] x1 : ffffffc011cf4f90 x0 : 0000000000000054
[ 120.873122][ T4396] Call trace:
[ 120.876259][ T4396] __list_del_entry_valid+0x98/0xac
[ 120.881304][ T4396] hid_debug_events_release+0x48/0x12c
[ 120.886617][ T4396] full_proxy_release+0x50/0xbc
[ 120.891323][ T4396] __fput+0xdc/0x238
[ 120.895075][ T4396] ____fput+0x14/0x24
[ 120.898911][ T4396] task_work_run+0x90/0x148
[ 120.903268][ T4396] do_exit+0x1bc/0x8a4
[ 120.907193][ T4396] do_group_exit+0x8c/0xa4
[ 120.911458][ T4396] get_signal+0x468/0x744
[ 120.915643][ T4396] do_signal+0x84/0x280
[ 120.919650][ T4396] do_notify_resume+0xd0/0x218
[ 120.924262][ T4396] work_pending+0xc/0x3f0
[ Rahul Rameshbabu <sergeantsagara@protonmail.com>: rework changelog ]
Fixes: cd667ce24796 ("HID: use debugfs for events/reports dumping")
Signed-off-by: Charles Yi <be286@163.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Jamesdonkey A3R keyboard is identified as "Jamesdonkey A3R" in wired
mode, "A3R-U" in wireless mode and "A3R" in bluetooth mode. Adding them
to non-apple keyboards fixes function key.
Signed-off-by: Yihong Cao <caoyihong4@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
During the probe we add an I2C adapter and as soon as we add that adapter
it may be used for a transfer (e.g via the code in i2cdetect()).
Those transfers are not able to complete and time out. This is because the
HID raw_event callback (mcp2221_raw_event) will not be invoked until the
HID device's 'driver_input_lock' is marked up at the completion of the
probe in hid_device_probe(). This starves the driver of the responses it
is waiting for.
In order to allow the I2C transfers to complete while we are still in the
probe, start the IO once we have completed init of the HID device.
This issue seems to have been seen before and a patch was submitted but
it seems it was never accepted. See:
https://lore.kernel.org/all/20221103222714.21566-3-Enrik.Berkhan@inka.de/
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The process of adding an I2C adapter can invoke I2C accesses on that new
adapter (see i2c_detect()).
Ensure we have set the adapter's driver data to avoid null pointer
dereferences in the xfer functions during the adapter add.
This has been noted in the past and the same fix proposed but not
completed. See:
https://lore.kernel.org/lkml/ef597e73-ed71-168e-52af-0d19b03734ac@vigem.de/
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
There is no need to call MMIO reset using VPU_37XX_BUTTRESS_VPU_IP_RESET
register. IP will be reset by FLR or by entering d0i3. Also IP reset
during power_up is not needed as the VPU is already in reset.
Removing MMIO reset improves stability as it a partial device reset
that is not safe in some corner cases.
This change also brings back ivpu_boot_pwr_domain_disable() that
helps to properly power down VPU when it is hung by a buggy workload.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Fixes: 828d63042aec ("accel/ivpu: Don't enter d0i3 during FLR")
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115111004.1304092-1-jacek.lawrynowicz@linux.intel.com
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the sprd drm drivers from always returning zero in the
remove callback to the void returning variant.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102165640.3307820-33-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102165640.3307820-32-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102165640.3307820-31-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102165640.3307820-30-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102165640.3307820-29-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102165640.3307820-28-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102165640.3307820-27-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the etnaviv drm driver from always returning zero in
the remove callback to the void returning variant.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102165640.3307820-25-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102165640.3307820-24-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102165640.3307820-23-u.kleine-koenig@pengutronix.de
|
|
Replace the generic error message issued by the driver core when the remove
callback returns non-zero ("remove callback returned a non-zero value. This
will be ignored.") by a message that tells the actual problem.
Also simplify a bit by checking the return value of wait_event_timeout a
bit later.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102165640.3307820-22-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the armada drm drivers from always returning zero in
the remove callback to the void returning variant.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102165640.3307820-21-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102165640.3307820-20-u.kleine-koenig@pengutronix.de
|
|
With tpd12s015_remove() marked with __exit this function is discarded
when the driver is compiled as a built-in. The result is that when the
driver unbinds there is no cleanup done which results in resource
leakage or worse.
Fixes: cff5e6f7e83f ("drm/bridge: Add driver for the TI TPD12S015 HDMI level shifter")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102165640.3307820-19-u.kleine-koenig@pengutronix.de
|
|
LKP found issues with a kernel doc in the driver:
core.c:116: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_update_events'
core.c:188: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_get_eventconfig'
It looks like it were copy'n'paste typos when these descriptions
had been introduced. Fix the typos.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310070743.WALmRGSY-lkp@intel.com/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231120150756.1661425-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Mark has not really been active as maintainer for x86 platform drivers
lately, drop Mark from the MAINTAINERS entries for drivers/platform/x86,
drivers/platform/mellanox and drivers/platform/surface.
Cc: Mark Gross <markgross@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231120154548.611041-1-hdegoede@redhat.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fixes for v6.7-rc3
This includes following USB4/Thunderbolt fixes for v6.7-rc3:
- Fix a lane bonding issue on ASMedia USB4 device
- Send uevents when link is switched to asymmetric or symmetric
- Only add device router DP IN adapters to the head of resource list
to avoid issues during system resume.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (1451 commits)
thunderbolt: Only add device router DP IN to the head of the DP resource list
thunderbolt: Send uevent after asymmetric/symmetric switch
thunderbolt: Set lane bonding bit only for downstream port
|
|
LoongArch-Vol1 has been updated to v1.10, the links in the documentation
are out of date, let's update it.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch-Vol1 has been updated to v1.10, the links in the documentation
are out of date, let's update it.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When a cpu is hot-unplugged, it is put in idle state and the function
arch_cpu_idle_dead() is called. The timer interrupt for this processor
should be disabled, otherwise there will be pending timer interrupt for
the unplugged cpu, so that vcpu is prevented from giving up scheduling
when system is running in vm mode.
This patch implements the timer shutdown interface so that the constant
timer will be properly disabled when a CPU is hot-unplugged.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Mark {dmw,tlb}_virt_to_page() exports as non-GPL, in order to let
out-of-tree modules (e.g. OpenZFS) be built without errors. Otherwise
we get:
ERROR: modpost: GPL-incompatible module zfs.ko uses GPL-only symbol 'dmw_virt_to_page'
ERROR: modpost: GPL-incompatible module zfs.ko uses GPL-only symbol 'tlb_virt_to_page'
Reported-by: Haowu Ge <gehaowu@bitmoe.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The kernel parameter 'nokaslr' is handled before start_kernel(), so we
don't need early_param() to mark it technically. But it can cause a boot
warning as follows:
Unknown kernel command line parameters "nokaslr", will be passed to user space.
When we use 'init=/bin/bash', 'nokaslr' which passed to user space will
even cause a kernel panic. So we use early_param() to mark 'nokaslr',
simply print a notice and silence the boot warning (also fix a potential
panic). This logic is similar to RISC-V.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When build kernel with C=1, we get:
arch/loongarch/kernel/process.c:234:46: warning: incorrect type in argument 1 (different address spaces)
arch/loongarch/kernel/process.c:234:46: expected void *ptr
arch/loongarch/kernel/process.c:234:46: got unsigned long [noderef] __percpu *
arch/loongarch/kernel/process.c:234:46: warning: incorrect type in argument 1 (different address spaces)
arch/loongarch/kernel/process.c:234:46: expected void *ptr
arch/loongarch/kernel/process.c:234:46: got unsigned long [noderef] __percpu *
arch/loongarch/kernel/process.c:234:46: warning: incorrect type in argument 1 (different address spaces)
arch/loongarch/kernel/process.c:234:46: expected void *ptr
arch/loongarch/kernel/process.c:234:46: got unsigned long [noderef] __percpu *
arch/loongarch/kernel/process.c:234:46: warning: incorrect type in argument 1 (different address spaces)
arch/loongarch/kernel/process.c:234:46: expected void *ptr
arch/loongarch/kernel/process.c:234:46: got unsigned long [noderef] __percpu *
Add __percpu annotation for __percpu_read()/__percpu_write() can avoid
such warnings. __percpu_xchg() and other functions don't need annotation
because their wrapper, i.e. _pcp_protect(), already suppresses warnings.
Also adjust the indentations in this file.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311080409.LlOfTR3m-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202311080840.Vc2kXhfp-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202311081340.3k72KKdg-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202311120926.cjYHyoYw-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202311152142.g6UyNx1R-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202311160339.DbhaH8LX-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202311181454.CTPrSYmQ-lkp@intel.com/
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
