summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-07-26ceph: set up readahead size when rsize is not passedYehuda Sadeh
This should improve the default read performance, as without it readahead is practically disabled. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2011-07-26rbd: cancel watch request when releasing the deviceYehuda Sadeh
We were missing this cleanup, so when a device was released the osd didn't clean up its watchers list, so following notifications could be slow as osd needed to timeout on the client. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2011-07-26ceph: ignore lease maskSage Weil
The lease mask is no longer used (and it changed a while back). Instead, use a non-zero duration to indicate that there is a lease being issued. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26ceph: fix ceph_lookup_open intent usageSage Weil
We weren't properly calling lookup_instantiate_filp when setting up the lookup intent, which could lead to file leakage on errors. So: - use separate helper for the hidden snapdir translation, immediately following the mds request - use ceph_finish_lookup for the final dentry/return value dance in the exit path - lookup_instantiate_filp on success Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26ceph: only link open operations to directory unsafe list if O_CREAT|O_TRUNCSage Weil
We only need to put these on the directory unsafe list if they have side effects that fsync(2) should flush out. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26ceph: fix bad parent_inode calc in ceph_lookup_openSage Weil
We were always getting NULL here because the intent file f_dentry is always NULL at this point, which means we were always passing NULL to ceph_mdsc_do_request. In reality, this was fine, since this isn't currently ever a write operation that needs to get strung on the dir's unsafe list. Use the dir explicitly, and only pass it if this open has side-effects that a dir fsync should flush. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26ceph: avoid carrying Fw cap during write into page cacheSage Weil
The generic_file_aio_write call may block on balance_dirty_pages while we flush data to the OSDs. If we hold a reference to the FILE_WR cap during that interval revocation by the MDS (e.g., to do a stat(2)) may be very slow. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26libceph: don't time out osd requests that haven't been receivedSage Weil
Keep track of when an outgoing message is ACKed (i.e., the server fully received it and, presumably, queued it for processing). Time out OSD requests only if it's been too long since they've been received. This prevents timeouts and connection thrashing when the OSDs are simply busy and are throttling the requests they read off the network. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26ceph: report f_bfree based on kb_avail rather than diffing.Greg Farnum
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Greg Farnum <gregory.farnum@dreamhost.com>
2011-07-26ceph: only queue capsnap if caps are dirtySage Weil
We used to go into this branch if i_wrbuffer_ref_head was non-zero. This was an ancient check from before we were careful about dealing with all kinds of caps (and not just dirty pages). It is cleaner to only queue a capsnap if there is an actual dirty cap. If we are racing with... something...we will end up here with ci->i_wrbuffer_refs but no dirty caps. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26ceph: fix snap writeback when racing with writesSage Weil
There are two problems that come up when we try to queue a capsnap while a write is in progress: - The FILE_WR cap is held, but not yet dirty, so we may queue a capsnap with dirty == 0. That will crash later in __ceph_flush_snaps(). Or on the FILE_WR cap if a write is in progress. - We may not have i_head_snapc set, which causes problems pretty quickly. Look to the snaprealm in this case. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26ceph: use flag bit for at_end readdir flagSage Weil
This saves us a word of memory per file. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26ceph: add F_SYNC file flag to force sync (non-O_DIRECT) ioSage Weil
This allows us to force IO through the sync path which you normally only get when multiple clients are reading/writing to the same file or by mounting with -o sync. Among other things, this lets test programs verify correctness with a single mount. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26ceph: add flags field to file_infoSage Weil
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26Merge branch 'x86-olpc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-olpc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, olpc-xo15-sci: Enable EC wakeup capability x86, olpc: Fix dependency on POWER_SUPPLY x86, olpc: Add XO-1.5 SCI driver x86, olpc: Add XO-1 RTC driver x86, olpc-xo1-sci: Propagate power supply/battery events x86, olpc-xo1-sci: Add lid switch functionality x86, olpc-xo1-sci: Add GPE handler and ebook switch functionality x86, olpc: EC SCI wakeup mask functionality x86, olpc: Add XO-1 SCI driver and power button control x86, olpc: Add XO-1 suspend/resume support x86, olpc: Rename olpc-xo1 to olpc-xo1-pm x86, olpc: Move CS5536-related constants to cs5535.h x86, olpc: Add missing elements to device tree
2011-07-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: Cleanup: check return codes of crypto api calls CIFS: Fix oops while mounting with prefixpath [CIFS] Redundant null check after dereference cifs: use cifs_dirent in cifs_save_resume_key cifs: use cifs_dirent to replace cifs_get_name_from_search_buf cifs: introduce cifs_dirent cifs: cleanup cifs_filldir
2011-07-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-ktest * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-ktest: ktest: Fix bug when ADD_CONFIG is set but MIN_CONFIG is not ktest: Keep fonud configs separate from default configs ktest: Add prompt to use OUTPUT_MIN_CONFIG ktest: Use Kconfig dependencies to shorten time to make min_config ktest: Add test type make_min_config ktest: Require one TEST_START in config file ktest: Add helper function to avoid duplicate code ktest: Add IGNORE_WARNINGS to ignore warnings in some patches ktest: Fix tar extracting of modules to target ktest: Have the testing tmp dir include machine name ktest: Add POST/PRE_BUILD options ktest: Allow initrd processing without modules defined ktest: Have LOG_FILE evaluate options as well ktest: Have wait on stdio honor bug timeout ktest: Implement our own force min config ktest: Add TEST_NAME option ktest: Add CONFIG_BISECT_GOOD option ktest: Add detection of triple faults ktest: Notify reason to break out of monitoring boot
2011-07-26vfs: document locking requirements for d_move, __d_move and d_materialise_uniqueJeff Layton
Adding a comment to d_materialise_unique per Al's request... d_move and __d_move have some pretty substantial locking requirements, but they are not clearly documented. Add some comments spelling them out. Also, document the requirement for the i_mutex of the parent in d_materialise_unique. Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wfg/writeback * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/writeback: (27 commits) mm: properly reflect task dirty limits in dirty_exceeded logic writeback: don't busy retry writeback on new/freeing inodes writeback: scale IO chunk size up to half device bandwidth writeback: trace global_dirty_state writeback: introduce max-pause and pass-good dirty limits writeback: introduce smoothed global dirty limit writeback: consolidate variable names in balance_dirty_pages() writeback: show bdi write bandwidth in debugfs writeback: bdi write bandwidth estimation writeback: account per-bdi accumulated written pages writeback: make writeback_control.nr_to_write straight writeback: skip tmpfs early in balance_dirty_pages_ratelimited_nr() writeback: trace event writeback_queue_io writeback: trace event writeback_single_inode writeback: remove .nonblocking and .encountered_congestion writeback: remove writeback_control.more_io writeback: skip balance_dirty_pages() for in-memory fs writeback: add bdi_dirty_limit() kernel-doc writeback: avoid extra sync work at enqueue time writeback: elevate queue_io() into wb_writeback() ... Fix up trivial conflicts in fs/fs-writeback.c and mm/filemap.c
2011-07-26omfs: fix (mode & S_IFDIR) abuseAl Viro
granted, on a filesystem that has only regular files and directories it happens to work, but really should be S_ISDIR(mode)... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-26btrfs: S_ISREG(mode) is not mode & S_IFREG...Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-26ima: fmode_t misspelled as mode_t...Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-26Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-block: block: fix warning with calling smp_processor_id() in preemptible section
2011-07-26pci-label.c: size_t misspelled as mode_tAl Viro
no, really, strlen() and snprintf() do not return mode_t values... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-26jffs2: S_ISLNK(mode & S_IFMT) is pointlessAl Viro
it's S_ISLNK(mode), TYVM... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-26snd_msnd ->mode is fmode_t, not mode_tAl Viro
we put FMODE_... in there Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-26v9fs_iop_get_acl: get rid of unused variableAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-26vfs: dont chain pipe/anon/socket on superblock s_inodes listEric Dumazet
Workloads using pipes and sockets hit inode_sb_list_lock contention. superblock s_inodes list is needed for quota, dirty, pagecache and fsnotify management. pipe/anon/socket fs are clearly not candidates for these. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-26Documentation: Exporting: update description of d_splice_aliasPhillip Lougher
Following commits a904937 and 0c1aa9a update the d_splice_alias desciption. Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-26fs: add missing unlock in default_llseek()Dan Carpenter
A recent change in linux-next, 982d816581 "fs: add SEEK_HOLE and SEEK_DATA flags" added some direct returns on error, but it should have been a goto out. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-26Merge branch 'drm-core-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (135 commits) drm/radeon/kms: fix DP training for DPEncoderService revision bigger than 1.1 drm/radeon/kms: add missing vddci setting on NI+ drm/radeon: Add a rmb() in IH processing drm/radeon: ATOM Endian fix for atombios_crtc_program_pll() drm/radeon: Fix the definition of RADEON_BUF_SWAP_32BIT drm/radeon: Do an MMIO read on interrupts when not uisng MSIs drm/radeon: Writeback endian fixes drm/radeon: Remove a bunch of useless _iomem casts drm/gem: add support for private objects DRM: clean up and document parsing of video= parameter DRM: Radeon: Fix section mismatch. drm: really make debug levels match in edid failure code drm/radeon/kms: fix i2c map for rv250/280 drm/nouveau/gr: disable fifo access and idle before suspend ctx unload drm/nouveau: pass flag to engine fini() method on suspend drm/nouveau: replace nv04_graph_fifo_access() use with direct reg bashing drm/nv40/gr: rewrite/split context takedown functions drm/nouveau: detect disabled device in irq handler and return IRQ_NONE drm/nouveau: ignore connector type when deciding digital/analog on DVI-I drm/nouveau: Add a quirk for Gigabyte NX86T ...
2011-07-26Merge branch 'fix/asoc' into for-linusTakashi Iwai
2011-07-26ALSA: hda - Cirrus Logic CS421x supportTim Howe
This update includes the changes necessary for supporting the CS421x family of codecs. Previously this file only supported the CS420x family of codecs. This file also contains init verbs to correct several issues in the CS421x hardware. Behavior between the CS421x and CS420x codec families is similar, so several functions have been reused with "if" statements to determine which codec family (CS421x or CS420x) is present. Also, this file will be updated sometime in the near future in order to add support for a system using CS421x that requires mono mix on the speaker output only. [Fix const usages and adaption for new APIs by tiwai] Signed-off-by: Tim Howe <tim.howe@cirrus.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-26ALSA: Make pcm.h self-containedTakashi Iwai
Move the macros depending on snd_mask_min() and co out of pcm.h into pcm_params.h. Otherwise using some params_*() macros will give comiple errors without inclusion of pcm_params.h. Also use hw_param_interval_c() and hw_param_mask_c() for const pointer. Reported-by: Tim Blechmann <tim@klingt.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-26ALSA: hda - Allow codec-specific set_power_state opsTakashi Iwai
The procedure for codec D-state change may have exceptional cases depending on the codec chip, such as a longer delay or suppressing D3. This patch adds a new codec ops, set_power_state() to override the system default function. For ease of porting, snd_hda_codec_set_power_to_all() helper function is extracted from the default set_power_state() function. As an example, the Conexant codec-specific delay is removed from the default routine but moved to patch_conexant.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-26ALSA: hda - Add post_suspend patch opsTakashi Iwai
Add a new ops, post_suspend(), which is called after suspend() ops is performed. This is called only in the case of the real PM suspend, and the codec driver can use this for further changing of D-state or clearing the LED, etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-26ALSA: hda - Make CONFIG_SND_HDA_POWER_SAVE depending on CONFIG_PMTakashi Iwai
It makes little sense to enable power-saving without PM. This removes SND_HDA_NEEDS_RESUME define so that we can use CONFIG_PM in all places. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-26block: fix warning with calling smp_processor_id() in preemptible sectionJens Axboe
After commit 5757a6d7 introduced an unsafe calling of smp_processor_id(), with preempt debuggin turned on we spew a lot of: BUG: using smp_processor_id() in preemptible [00000000] code: kjournald/514 caller is __make_request+0x1b8/0x308 [<c0019f44>] (unwind_backtrace+0x0/0xe8) from [<c024b4cc>] (debug_smp_processor_id+0xbc/0xf0) [<c024b4cc>] (debug_smp_processor_id+0xbc/0xf0) from [<c0223d14>] (__make_request+0x1b8/0x308) [<c0223d14>] (__make_request+0x1b8/0x308) from [<c02215ac>] (generic_make_request+0x4dc/0x558) [<c02215ac>] (generic_make_request+0x4dc/0x558) from [<c022173c>] (submit_bio+0x114/0x138) [<c022173c>] (submit_bio+0x114/0x138) from [<c011f504>] (submit_bh+0x148/0x16c) [<c011f504>] (submit_bh+0x148/0x16c) from [<c0121ed8>] (__sync_dirty_buffer+0x88/0xd8) [<c0121ed8>] (__sync_dirty_buffer+0x88/0xd8) from [<c01aff78>] (journal_commit_transaction+0x1198/0x1688) [<c01aff78>] (journal_commit_transaction+0x1198/0x1688) from [<c01b4034>] (kjournald+0xb4/0x224) [<c01b4034>] (kjournald+0xb4/0x224) from [<c0069ea0>] (kthread+0x8c/0x94) [<c0069ea0>] (kthread+0x8c/0x94) from [<c00137f8>] (kernel_thread_exit+0x0/0x8) Fix this by just using raw_smp_processor_id(), it's just a hint after all. There's no pinning of the CPU or accessing per-cpu structures involved. Reported-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-26drm/radeon/kms: fix DP training for DPEncoderService revision bigger than 1.1Jerome Glisse
DPEncoderService newer than 1.1 can't properly program the DP (display port) link training. When facing such version use the DIGxEncoderControl method instead. Fix DP link training on some R7XX. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-26drm/radeon/kms: add missing vddci setting on NI+Alex Deucher
Need to add vddci setting to pm init as well as resume. Fixes hangs on load on some boards. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=38754 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-26Revert "microblaze: PCI fix typo fault in of_node pointer moving into pci_bus"Michal Simek
This reverts commit c9d761b7c4b658a937a941aea2781f511a0ff3ec. Ben' commit "microblaze/pci: Move the remains of pci_32.c to pci-common.c" (sha1: bf13a6fa09b8db7f1fd59b5e2ed3674a89a6a25c) completely removed pci_32.c that's why my fixing commit caused the problem with merging and need to be revert. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-07-26GFS2: Fix mount hang caused by certain access pattern to sysfs filesSteven Whitehouse
Depending upon the order of userspace/kernel during the mount process, this can result in a hang without the _all version of the completion. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-07-26ALSA: hda - Make sure mute led reflects master mute stateVitaliy Kulikov
This patch adds checking of mute state on all outputs besides just speakers to calculate the master mute state for mute led support. It also renames and splits the function that does it for better code clarity. Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-26ALSA: hda - Fix invalid mute led state on resume of IDT codecsVitaliy Kulikov
Codec state is not restored immediately on resume but on the first access when power-save is enabled. That leads to an invalid mute led state after resume until either sound is played or some control is changed. This patch adds a possibility for a vendor specific patch to restore codec state immediately after resume if required. And it adds code to restore IDT codecs state immediately on resume on HP systems with mute led support. Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-25p9: avoid unused variable warningLinus Torvalds
Commit 4e34e719e457 ("fs: take the ACL checks to common code") removed the use of the 'acl' variable in v9fs_iop_get_acl(), but left the variable definition around. Remove it to get rid of the warning: fs/9p/acl.c: In function ‘v9fs_iop_get_acl’: fs/9p/acl.c:101:20: warning: unused variable ‘acl’ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25Merge branch 'staging-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (741 commits) staging:iio:meter:ade7753 should be 16 bit read not 8 bit for mode register. staging:iio:kfifo_buf fix double initialization of the ring device structure. staging:iio:accel:lis3l02dq: fix incorrect pointer passed to spi_set_drvdata. staging:iio:imu fix missing register table index for some channels spectra: enable device before poking it staging: rts_pstor: Fix a miswriting staging/lirc_bt829: Return -ENODEV when no hardware is found. staging/lirc_parallel: remove pointless prototypes. staging/lirc_parallel: fix panic on rmmod staging:iio:adc:ad7476: Incorrect pointer into spi_set_drvdata. Staging: zram: Fix kunmapping order Revert "gma500: Fix dependencies" gma500: Add medfield header gma500: wire up the mrst i2c bus from chip_info gma500: Fix DPU build gma500: Clean up the DPU config and make it runtime gma500: resync with Medfield progress gma500: Use the mrst helpers and power control for mode commit gma500@ Fix backlight range error gma500: More Moorestown muddle meddling means MM maybe might modeset ... Fix up fairly trivial conflicts all over, mostly due to header file cleanup conflicts, but some deleted files and some just context changes: - Documentation/feature-removal-schedule.txt - drivers/staging/bcm/headers.h - drivers/staging/brcm80211/brcmfmac/dhd_linux.c - drivers/staging/brcm80211/brcmfmac/dhd_sdio.c - drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h - drivers/staging/brcm80211/brcmfmac/wl_iw.c - drivers/staging/et131x/et131x_netdev.c - drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c - drivers/staging/rtl8192e/r8192E.h - drivers/staging/usbip/userspace/src/utils.h
2011-07-25Merge branch 'tty-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (26 commits) amba pl011: workaround for uart registers lockup n_gsm: fix the wrong FCS handling pch_uart: add missing comment about OKI ML7223 pch_uart: Add MSI support tty: fix "IRQ45: nobody cared" PTI feature to allow user to name and mark masterchannel request. 0 for o PTI Makefile bug. tty: serial: samsung.c remove legacy PM code. SERIAL: SC26xx: Fix link error. serial: mrst_max3110: initialize waitqueue earlier mrst_max3110: Change max missing message priority. tty: s5pv210: Add delay loop on fifo reset function for UART tty/serial: Fix XSCALE serial ports, e.g. ce4100 serial: bfin_5xx: fix off-by-one with resource size drivers/tty: use printk_ratelimited() instead of printk_ratelimit() tty: n_gsm: Added refcount usage to gsm_mux and gsm_dlci structs tty: n_gsm: Add raw-ip support tty: n_gsm: expose gsmtty device nodes at ldisc open time pch_phub: Fix register miss-setting issue serial: 8250, increase PASS_LIMIT ...
2011-07-25Merge branch 'usb-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (115 commits) EHCI: fix direction handling for interrupt data toggles USB: serial: add IDs for WinChipHead USB->RS232 adapter USB: OHCI: fix another regression for NVIDIA controllers usb: gadget: m66592-udc: add pullup function usb: gadget: m66592-udc: add function for external controller usb: gadget: r8a66597-udc: add pullup function usb: renesas_usbhs: support multi driver usb: renesas_usbhs: inaccessible pipe is not an error usb: renesas_usbhs: care buff alignment when dma handler USB: PL2303: correctly handle baudrates above 115200 usb: r8a66597-hcd: fixup USB_PORT_STAT_C_SUSPEND shift usb: renesas_usbhs: compile/config are rescued usb: renesas_usbhs: fixup comment-out usb: update email address in ohci-sh and r8a66597-hcd usb: r8a66597-hcd: add function for external controller EHCI: only power off port if over-current is active USB: mon: Allow to use usbmon without debugfs USB: EHCI: go back to using the system clock for QH unlinks ehci: add pci quirk for Ordissimo and RM Slate 100 too ehci: refactor pci quirk to use standard dmi_check_system method ... Fix up trivial conflicts in Documentation/feature-removal-schedule.txt
2011-07-25Merge branch 'driver-core-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6 * 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: updated Documentation/ja_JP/SubmittingPatches debugfs: add documentation for debugfs_create_x64 uio: uio_pdrv_genirq: Add OF support firmware: gsmi: remove sysfs entries when unload the module Documentation/zh_CN: Fix messy code file email-clients.txt driver core: add more help description for "path to uevent helper" driver-core: modify FIRMWARE_IN_KERNEL help message driver-core: Kconfig grammar corrections in firmware configuration DOCUMENTATION: Replace create_device() with device_create(). DOCUMENTATION: Update overview.txt in Doc/driver-model. pti: pti_tty_install documentation mispelling.
2011-07-25Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (99 commits) drivers/virt: add missing linux/interrupt.h to fsl_hypervisor.c powerpc/85xx: fix mpic configuration in CAMP mode powerpc: Copy back TIF flags on return from softirq stack powerpc/64: Make server perfmon only built on ppc64 server devices powerpc/pseries: Fix hvc_vio.c build due to recent changes powerpc: Exporting boot_cpuid_phys powerpc: Add CFAR to oops output hvc_console: Add kdb support powerpc/pseries: Fix hvterm_raw_get_chars to accept < 16 chars, fixing xmon powerpc/irq: Quieten irq mapping printks powerpc: Enable lockup and hung task detectors in pseries and ppc64 defeconfigs powerpc: Add mpt2sas driver to pseries and ppc64 defconfig powerpc: Disable IRQs off tracer in ppc64 defconfig powerpc: Sync pseries and ppc64 defconfigs powerpc/pseries/hvconsole: Fix dropped console output hvc_console: Improve tty/console put_chars handling powerpc/kdump: Fix timeout in crash_kexec_wait_realmode powerpc/mm: Fix output of total_ram. powerpc/cpufreq: Add cpufreq driver for Momentum Maple boards powerpc: Correct annotations of pmu registration functions ... Fix up trivial Kconfig/Makefile conflicts in arch/powerpc, drivers, and drivers/cpufreq
generated by cgit (git 2.34.1) at 2025-09-12 02:42:10 +0000