summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-07-19b43: correctly display longer chipsets idsRafał Miłecki
Some of the newer Broadcom chipsets have longe names like BCM43224, BCM43225, etc. However Broadcom decided to keep using u16 for storing them. Use %X or %d depending on chip_id value to avoid BCMA8D8, etc. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19mac80211: implement scan supported ratesJohannes Berg
Scanning currently uses the TX rate mask to restrict the rate set, which is bogus. Make it use the new set of rates from userspace. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19cfg80211: allow userspace to control supported rates in scanJohannes Berg
Some P2P scans are not allowed to advertise 11b rates, but that is a rather special case so instead of having that, allow userspace to request the rate sets (per band) that are advertised in scan probe request frames. Since it's needed in two places now, factor out some common code parsing a rate array. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19b43: HT-PHY: fix masks in radio ctlRafał Miłecki
Old masks were causing ugly, delayed lock ups. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19b43: bcma: read info about supported bandsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19b43: bcma: define 80211 core specific IO status bitsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19bcma: define IO status registerRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19ieee80211: add few wmm tspec valuesKalle Valo
These are needed by ath6kl for parsing tspec status from an IE. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19bcma: handle alternative SPROM locationRafał Miłecki
Some cards do not use additional 0x30 offset for SPROM location. We do not know the real condition for it yet, make it BCM4331 specific for now. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19b43: HT-PHY: fix typo in 0x2059 radio initRafał Miłecki
Following operation was incorrectly translated: radio_read(0x0011) -> 0xffff radio_write(0x0011) <- 0xfff7 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19b43: HT-PHY: find channel entry with regs dataRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19b43: HT-PHY: switch to channel after enabling radioRafał Miłecki
Also change the default channel to 11. This is the first channel closed driver switches to. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19b43: use agent R/W ops for BCMA_IOCTLRafał Miłecki
BCMA_IOCTL is register in agent (AKA wrapper) core, we need to use special R/W ops for it. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19dlm: don't limit active work itemsDavid Teigland
Allow multiple workqueue items (locks with callbacks) to be processed concurrently. There should be no reason not to take advantage of this workqueue feature. Signed-off-by: David Teigland <teigland@redhat.com>
2011-07-19gpio/mxc/mxs: fix build error introduced by the irq_gc_ack() renamingShawn Guo
The following commit renames irq_gc_ack() to irq_gc_ack_set_bit(), and makes gpio-mxc and gpio-mxs fail to build. 659fb32d1b67476f4ade25e9ea0e2642a5b9c4b5 genirq: replace irq_gc_ack() with {set,clr}_bit variants (fwd) The patch fixed a couple of typo of comma to semicolon. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19EHCI: fix direction handling for interrupt data togglesAlan Stern
This patch (as1480) fixes a rather obscure bug in ehci-hcd. The qh_update() routine needs to know the number and direction of the endpoint corresponding to its QH argument. The number can be taken directly from the QH data structure, but the direction isn't stored there. The direction is taken instead from the first qTD linked to the QH. However, it turns out that for interrupt transfers, qh_update() gets called before the qTDs are linked to the QH. As a result, qh_update() computes a bogus direction value, which messes up the endpoint toggle handling. Under the right combination of circumstances this causes usb_reset_endpoint() not to work correctly, which causes packets to be dropped and communications to fail. Now, it's silly for the QH structure not to have direct access to all the descriptor information for the corresponding endpoint. Ultimately it may get a pointer to the usb_host_endpoint structure; for now, adding a copy of the direction flag solves the immediate problem. This allows the Spyder2 color-calibration system (a low-speed USB device that sends all its interrupt data packets with the toggle set to 0 and hance requires constant use of usb_reset_endpoint) to work when connected through a high-speed hub. Thanks to Graeme Gill for supplying the hardware that allowed me to track down this bug. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Graeme Gill <graeme@argyllcms.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-19ceph: fix file mode calculationSage Weil
open(2) must always include one of O_RDONLY, O_WRONLY, or O_RDWR. No need for any O_APPEND special case. Passing O_WRONLY|O_RDWR is undefined according to the man page, but the Linux VFS interprets this as O_RDWR, so we'll do the same. This fixes open(2) with flags O_RDWR|O_APPEND, which was incorrectly being translated to readonly. Reported-by: Fyodor Ustinov <ufm@ufm.su> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-19Merge branch 'vhost-net-next' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
2011-07-19Merge branch 'davem-next.r8169' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6
2011-07-19bnx2x: disable FCoE for 578xx devices since not yet supportedDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: fix memory barriersVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: use BNX2X_Q_FLG_TPA_IPV6 for TPA queue configurationVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: disable loacal BH when scheduling FCOE napiVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: fix MB index for 4-port devicesDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: DCB reworkDmitry Kravkov
create DCB related states in function state-machine allow handling of DCB errors from FW allow disablement of DCB in FW, when peer disappears or error clean up unused functions/variables as pointed by David Binderman <dcb314@hotmail.com> Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: remove unnecessary dma_syncVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: stop tx before CNIC_STOPVladislav Zolotarov
It may take some time to cnic to respond, this prevents tx_timeout when it happens. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: add missing command in error handling flowDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: use correct dma_sync functionVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19Merge branch 'cross-platform/clkdev' into next/cross-platformArnd Bergmann
2011-07-19ARM: Consolidate the clkdev header filesKyungmin Park
Now most of ARM machines has the alsmot same __clk_get/put() macro So place it at the arch/arm/include/asm/clkdev.h and remove the reduntant header files But some machines don't have the same form as above. It can use the machince specific clkdev file by HAVE_MACH_CLKDEV config Now there are only 3 caese. 1) define the clk structure with clkdev macro => Need to move clk structure to proper header file arch/arm/mach-versatile/include/mach/clkdev.h arch/arm/mach-realview/include/mach/clkdev.h arch/arm/mach-vexpress/include/mach/clkdev.h arch/arm/mach-integrator/include/mach/clkdev.h 2) export the __clk_get/put function at clock.c arch/arm/mach-shmobile/include/mach/clkdev.h 3) demuxing the clk source arch/arm/mach-u300/include/mach/clkdev.h Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-07-19r8169: fix sticky accepts packet bits in RxConfig.Francois Romieu
e542a2269f232d61270ceddd42b73a4348dee2bb (r8169: adjust the RxConfig settings) broke the return from promiscuous mode to physical address match mode. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Signed-off-by: Hayes Wang <hayeswang@realtek.com>
2011-07-19ASoC: sgtl5000: guide user when regulator support is neededWolfram Sang
Print a hint when the user has a setup where CONFIG_REGULATOR is really needed to make the driver work. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Dong Aisheng <b29396@freescale.com> Tested-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-19ASoC: sgtl5000: refactor registering internal ldoWolfram Sang
The code for registering the internal ldo was present twice. Turn it into a function instead. Also, inform the user if LDO is used now. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Dong Aisheng <b29396@freescale.com> Tested-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-19ASoC: core: make comments fit the codeWolfram Sang
In one comment, cpu_dai was mentioned although codec_dai was used in the code. Also, fix the name for the card dai list which has no seperation into card_dai and codec_dai. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-19ASoC: Mark cache as dirty when suspendingMark Brown
Since quite a few drivers are not managing to flag the cache as needing to be resynced after suspend and it's a reasonable thing to do flag the cache as needing sync automatically when suspending. The expectation is that systems will mainly only keep the CODEC powered when doing audio through the CODEC so we won't actually suspend the device anyway; drivers which want to can override this behaviour when they resume. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
2011-07-19ARM: 6981/2: mmci: adjust calculation of f_minLinus Walleij
The ARM version maximum clock divider is 512 whereas for the ST variants it's 257. Let's use DIV_ROUND_UP() for both cases so we can see clearly what's going on here. [Use DIV_ROUND_UP to clarify elder code] Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Reviewed-by: Sebastian Rasmussen <sebastian.rasmussen@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-19vhost: optimize interrupt enable/disableMichael S. Tsirkin
As we now only update used ring after enabling the backend, we can write flags with __put_user: as that's done on data path, it matters. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-19ARM: Tegra: Seaboard: Fix I2C bus numbering for ADT7461Stephen Warren
Bus number 4 doesn't exist in the mainline kernel. The device is attached to bus number 3. (In the ChromeOS kernel, one of the I2C busses is split in two with a mux, this pushing all later busses to a higher bus number. In this case, 4 is the correct bus number for the ADT7461). Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-07-19ARM: Tegra: Trimslice: Tri-state DAP3 pinmuxStephen Warren
DAP3 is used for a bunch of GPIOs. Not tri-stating the pins means audio signals get sent out there, and this ends up resetting USB and breaking SDHCI too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-07-19USB: serial: add IDs for WinChipHead USB->RS232 adapterWolfgang Denk
Add ID 4348:5523 for WinChipHead USB->RS 232 adapter with Prolifec PL2303 chipset Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-19ARM: 7000/1: LPAE: Use long long printk format for displaying the pudCatalin Marinas
Currently using just long but this is not enough for the LPAE format (64-bit entries). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-19ARM: 6999/1: head, zImage: Always Enter the kernel in ARM stateDave Martin
Currently, the documented kernel entry requirements are not explicit about whether the kernel should be entered in ARM or Thumb, leading to an ambiguitity about how to enter Thumb-2 kernels. As a result, the kernel is reliant on the zImage decompressor to enter the kernel proper in the correct instruction set state. This patch changes the boot entry protocol for head.S and Image to be the same as for zImage: in all cases, the kernel is now entered in ARM. Documentation/arm/Booting is updated to reflect this new policy. A different rule will be needed for Cortex-M class CPUs as and when support for those lands in mainline, since these CPUs don't support the ARM instruction set at all: a note is added to the effect that the kernel must be entered in Thumb on such systems. Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-19ARM: btc: avoid invalidating the branch target cache on kernel TLB maintanenceRussell King
Kernel space needs very little in the way of BTC maintanence as most mappings which are created and destroyed are non-executable, and so could never enter the instruction stream. The case which does warrant BTC maintanence is when a module is loaded. This creates a new executable mapping, but at that point the pages have not been initialized with code and data, so at that point they contain unpredictable information. Invalidating the BTC at this stage serves little useful purpose. Before we execute module code, we call flush_icache_range(), which deals with the BTC maintanence requirements. This ensures that we have a BTC maintanence operation before we execute code via the newly created mapping. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-19vhost: fix zcopy reference countingMichael S. Tsirkin
Fix get/put refcount imbalance with zero copy, which caused qemu to hang forever on guest driver unload. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-19vhost: set log when updating used flags or avail eventJason Wang
We need to log writes when updating used flags and avail event fields. Otherwise the guest may see a stale value after migration and miss notifying the host. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-19vhost: init used ring after backend was setJason Wang
Move the used ring initialization after backend was set. This makes it possible to disable the backend and tweak the used ring, then restart. This will also make it possible to log the used ring write correctly. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-19netfilter: nfnetlink_queue: batch verdict supportFlorian Westphal
Introduces a new nfnetlink type that applies a given verdict to all queued packets with an id <= the id in the verdict message. If a mark is provided it is applied to all matched packets. This reduces the number of verdicts that have to be sent. Applications that make use of this feature need to maintain a timeout to send a batchverdict periodically to avoid starvation. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-07-19netfilter: nfnetlink_queue: assert monotonic packet idsEric Dumazet
Packet identifier is currently setup in nfqnl_build_packet_message(), using one atomic_inc_return(). Problem is that since several cpus might concurrently call nfqnl_enqueue_packet() for the same queue, we can deliver packets to consumer in non monotonic way (packet N+1 being delivered after packet N) This patch moves the packet id setup from nfqnl_build_packet_message() to nfqnl_enqueue_packet() to guarantee correct delivery order. This also removes one atomic operation. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Florian Westphal <fw@strlen.de> CC: Pablo Neira Ayuso <pablo@netfilter.org> CC: Eric Leblond <eric@regit.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-07-19davinci: DM365 EVM: fix video input mux bitsJon Povey
Video input mux settings for tvp7002 and imager inputs were swapped. Comment was correct. Tested on EVM with tvp7002 input. Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk> Acked-by: Manjunath Hadli <manjunath.hadli@ti.com> Cc: stable@kernel.org Signed-off-by: Sekhar Nori <nsekhar@ti.com>
generated by cgit (git 2.34.1) at 2025-09-18 11:11:11 +0000