summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-04-02Merge branch 'net-mvneta-improve-suspend-resume'David S. Miller
Jisheng Zhang says: ==================== net: mvneta: improve suspend/resume This series tries to optimize the mvneta's suspend/resume implementation by only taking necessary actions. Since v2: - keep rtnl lock when calling mvneta_start_dev() and mvneta_stop_dev() Thank Russell for pointing this out Since v1: - unify ret check - try best to keep the suspend/resume behavior - split txq deinit into sw/hw parts as well - adjust mvneta_stop_dev() location I didn't add Thomas's Ack tag to patch1, because in v2, I add new code to split the txq deinit into two parts. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-02net: mvneta: improve suspend/resumeJisheng Zhang
Current suspend/resume implementation reuses the mvneta_open() and mvneta_close(), but it could be optimized to take only necessary actions during suspend/resume. One obvious problem of current implementation is: after hundreds of system suspend/resume cycles, the resume of mvneta could fail due to fragmented dma coherent memory. After this patch, the non-necessary memory alloc/free is optimized out. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-02net: mvneta: split rxq/txq init and txq deinit into SW and HW partsJisheng Zhang
This is to prepare the suspend/resume improvement in next patch. The SW parts can be optimized out during resume. As for rxq handling during suspend, we'd like to drop packets by calling mvneta_rxq_drop_pkts() which is both SW and HW operation, so we don't split rxq deinit. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-02Merge tag 'drm-for-v4.17' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "Cannonlake and Vega12 support are probably the two major things. This pull lacks nouveau, Ben had some unforseen leave and a few other blockers so we'll see how things look or maybe leave it for this merge window. core: - Device links to handle sound/gpu pm dependency - Color encoding/range properties - Plane clipping into plane check helper - Backlight helpers - DP TP4 + HBR3 helper support amdgpu: - Vega12 support - Enable DC by default on all supported GPUs - Powerplay restructuring and cleanup - DC bandwidth calc updates - DC backlight on pre-DCE11 - TTM backing store dropping support - SR-IOV fixes - Adding "wattman" like functionality - DC crc support - Improved DC dual-link handling amdkfd: - GPUVM support for dGPU - KFD events for dGPU - Enable PCIe atomics for dGPUs - HSA process eviction support - Live-lock fixes for process eviction - VM page table allocation fix for large-bar systems panel: - Raydium RM68200 - AUO G104SN02 V2 - KEO TX31D200VM0BAA - ARM Versatile panels i915: - Cannonlake support enabled - AUX-F port support added - Icelake base enabling until internal milestone of forcewake support - Query uAPI interface (used for GPU topology information currently) - Compressed framebuffer support for sprites - kmem cache shrinking when GPU is idle - Avoid boosting GPU when waited item is being processed already - Avoid retraining LSPCON link unnecessarily - Decrease request signaling latency - Deprecation of I915_SET_COLORKEY_NONE - Kerneldoc and compiler warning cleanup for upcoming CI enforcements - Full range ycbcr toggling - HDCP support i915/gvt: - Big refactor for shadow ppgtt - KBL context save/restore via LRI cmd (Weinan) - Properly unmap dma for guest page (Changbin) vmwgfx: - Lots of various improvements etnaviv: - Use the drm gpu scheduler - prep work for GC7000L support vc4: - fix alpha blending - Expose perf counters to userspace pl111: - Bandwidth checking/limiting - Versatile panel support sun4i: - A83T HDMI support - A80 support - YUV plane support - H3/H5 HDMI support omapdrm: - HPD support for DVI connector - remove lots of static variables msm: - DSI updates from 10nm / SDM845 - fix for race condition with a3xx/a4xx fence completion irq - some refactoring/prep work for eventual a6xx support (ie. when we have a userspace) - a5xx debugfs enhancements - some mdp5 fixes/cleanups to prepare for eventually merging writeback - support (ie. when we have a userspace) tegra: - mmap() fixes for fbdev devices - Overlay plane for hw cursor fix - dma-buf cache maintenance support mali-dp: - YUV->RGB conversion support rockchip: - rk3399/chromebook fixes and improvements rcar-du: - LVDS support move to drm bridge - DT bindings for R8A77995 - Driver/DT support for R8A77970 tilcdc: - DRM panel support" * tag 'drm-for-v4.17' of git://people.freedesktop.org/~airlied/linux: (1646 commits) drm/i915: Fix hibernation with ACPI S0 target state drm/i915/execlists: Use a locked clear_bit() for synchronisation with interrupt drm/i915: Specify which engines to reset following semaphore/event lockups drm/i915/dp: Write to SET_POWER dpcd to enable MST hub. drm/amdkfd: Use ordered workqueue to restore processes drm/amdgpu: Fix acquiring VM on large-BAR systems drm/amd/pp: clean header file hwmgr.h drm/amd/pp: use mlck_table.count for array loop index limit drm: Fix uabi regression by allowing garbage mode->type from userspace drm/amdgpu: Add an ATPX quirk for hybrid laptop drm/amdgpu: fix spelling mistake: "asssert" -> "assert" drm/amd/pp: Add new asic support in pp_psm.c drm/amd/pp: Clean up powerplay code on Vega12 drm/amd/pp: Add smu irq handlers for legacy asics drm/amd/pp: Fix set wrong temperature range on smu7 drm/amdgpu: Don't change preferred domian when fallback GTT v5 drm/vmwgfx: Bump version patchlevel and date drm/vmwgfx: use monotonic event timestamps drm/vmwgfx: Unpin the screen object backup buffer when not used drm/vmwgfx: Stricter count of legacy surface device resources ...
2018-04-02Merge remote-tracking branches 'spi/topic/sh-msiof', 'spi/topic/sprd' and ↵Mark Brown
'spi/topic/tegra20-slink' into spi-next
2018-04-02Merge remote-tracking branches 'spi/topic/jcore', 'spi/topic/kconfig', ↵Mark Brown
'spi/topic/orion', 'spi/topic/pxa2xx' and 'spi/topic/rspi' into spi-next
2018-04-02Merge remote-tracking branches 'spi/topic/atmel', 'spi/topic/bcm-qspi', ↵Mark Brown
'spi/topic/bcm2835aux', 'spi/topic/dw' and 'spi/topic/gpio' into spi-next
2018-04-02Merge remote-tracking branch 'spi/topic/samsung' into spi-nextMark Brown
2018-04-02Merge remote-tracking branches 'spi/fix/atmel', 'spi/fix/pxa2xx' and ↵Mark Brown
'spi/fix/unregiser' into spi-linus
2018-04-02Merge remote-tracking branch 'spi/fix/dma' into spi-linusMark Brown
2018-04-02MAINTAINERS: update Andi's e-mailAndi Shyti
Because I will be leaving Samsung soon, update my e-mail address to andi@etezian.org For reachability update also mailcap. CC: Krzysztof Kozlowski <krzk@kernel.org> CC: Kukjin Kim <kgene@kernel.org> CC: linux-samsung-soc@vger.kernel.org Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-02ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_threshEric Dumazet
I forgot to change ip6frag_low_thresh proc_handler from proc_dointvec_minmax to proc_doulongvec_minmax Fixes: 3e67f106f619 ("inet: frags: break the 2GB limit for frags storage") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-02Merge branches 'pm-cpuidle' and 'pm-tools'Rafael J. Wysocki
* pm-cpuidle: cpuidle: poll_state: Avoid invoking local_clock() too often PM: cpuidle/suspend: Add s2idle usage and time state attributes cpuidle: Enable coupled cpuidle support on Exynos3250 platform cpuidle: poll_state: Add time limit to poll_idle() ARM: cpuidle: Drop memory allocation error message from arm_idle_init_cpu() * pm-tools: pm-graph: AnalyzeSuspend v5.0 pm-graph: AnalyzeBoot v2.2 pm-graph: config files and installer
2018-04-02Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: (38 commits) cpufreq: CPPC: Use transition_delay_us depending transition_latency cpufreq: tegra186: Don't validate the frequency table twice cpufreq: speedstep: Don't validate the frequency table twice cpufreq: sparc: Don't validate the frequency table twice cpufreq: sh: Don't validate the frequency table twice cpufreq: sfi: Don't validate the frequency table twice cpufreq: scpi: Don't validate the frequency table twice cpufreq: sc520: Don't validate the frequency table twice cpufreq: s3c24xx: Don't validate the frequency table twice cpufreq: qoirq: Don't validate the frequency table twice cpufreq: pxa: Don't validate the frequency table twice cpufreq: ppc_cbe: Don't validate the frequency table twice cpufreq: powernow: Don't validate the frequency table twice cpufreq: p4-clockmod: Don't validate the frequency table twice cpufreq: mediatek: Don't validate the frequency table twice cpufreq: longhaul: Don't validate the frequency table twice cpufreq: ia64-acpi: Don't validate the frequency table twice cpufreq: elanfreq: Don't validate the frequency table twice cpufreq: e_powersaver: Don't validate the frequency table twice cpufreq: cpufreq-dt: Don't validate the frequency table twice ...
2018-04-02Merge branches 'pm-core', 'pm-sleep' and 'acpi-pm'Rafael J. Wysocki
* pm-core: driver core: Introduce device links reference counting PM / wakeirq: Add wakeup name to dedicated wake irqs * pm-sleep: PM / hibernate: Change message when writing to /sys/power/resume PM / hibernate: Make passing hibernate offsets more friendly PCMCIA / PM: Avoid noirq suspend aborts during suspend-to-idle * acpi-pm: ACPI / PM: Fix keyboard wakeup from suspend-to-idle on ASUS UX331UA ACPI / PM: Allow deeper wakeup power states with no _SxD nor _SxW ACPI / PM: Reduce LPI constraints logging noise ACPI / PM: Do not reconfigure GPEs for suspend-to-idle
2018-04-02Merge branches 'acpi-osi', 'acpi-scan', 'acpi-tad', 'acpi-video' and 'acpi-misc'Rafael J. Wysocki
* acpi-osi: ACPI / OSI: Add OEM _OSI strings to disable NVidia RTD3 * acpi-scan: ACPI / scan: Send change uevent with offine environmental data * acpi-tad: ACPI: Add Time and Alarm Device (TAD) driver * acpi-video: ACPI / video: Add quirk to force acpi-video backlight on Samsung 670Z5E * acpi-misc: ACPI / Kconfig: Update ACPI_PROCFS_POWER help text
2018-04-02Merge branches 'acpi-tables', 'acpi-cppc' and 'acpi-pci'Rafael J. Wysocki
* acpi-tables: ACPI: add NFIT and HMAT to the initrd override list * acpi-cppc: ACPI / CPPC: Update all pr_(debug/err) messages to log the susbspace id * acpi-pci: ACPI / PCI: pci_link: Allow the absence of _PRS and change log level
2018-04-02Merge branches 'acpi-battery', 'acpi-doc' and 'acpi-pmic'Rafael J. Wysocki
* acpi-battery: Revert "ACPI: battery: Add the ThinkPad "Not Charging" quirk" ACPI: battery: do not export degraded capacity values over 100 ACPI: battery: make function __battery_hook_unregister() static ACPI: battery: Add the ThinkPad "Not Charging" quirk thinkpad_acpi: Add support for battery thresholds power: add to_power_supply macro to the API battery: Add the battery hooking API * acpi-doc: ACPI: sysfs: Update device object sysfs documentation * acpi-pmic: ACPI / PMIC: Replace license boilerplate with SPDX license identifier
2018-04-02Merge branch 'acpica'Rafael J. Wysocki
* acpica: (21 commits) ACPICA: Update version to 20180313 ACPICA: Cleanup/simplify module-level code support ACPICA: Events: add a return on failure from acpi_hw_register_read ACPICA: adding SPDX headers ACPICA: Rename a global for clarity, no functional change ACPICA: macros: fix ACPI_ERROR_NAMESPACE macro ACPICA: Change a compile-time option to a runtime option ACPICA: Remove calling of _STA from acpi_get_object_info() ACPICA: AML Debug Object: Don't ignore output of zero-length strings ACPICA: Fix memory leak on unusual memory leak ACPICA: Events: Dispatch GPEs after enabling for the first time ACPICA: Events: Add parallel GPE handling support to fix potential redundant _Exx evaluations ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume ACPICA: acpi: acpica: fix acpi operand cache leak in nseval.c ACPICA: Update version to 20180209 ACPICA: Add option to disable Package object name resolution errors ACPICA: Integrate package handling with module-level code ACPICA: Revert "Fix for implicit result conversion for the To____ functions" ACPICA: Update for some debug output. No functional change ACPICA: Update error message, no functional change ...
2018-04-01Merge branch 'net-bgmac-Couple-of-sparse-warnings'David S. Miller
Florian Fainelli says: ==================== net: bgmac: Couple of sparse warnings This patch series fixes a couple of warnings reported by sparse, should not cause any functional problems since bgmac is typically used on LE platforms anyway. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01net: bgmac: Fix endian access in bgmac_dma_tx_ring_free()Florian Fainelli
bgmac_dma_tx_ring_free() assigns the ctl1 word which is a litle endian 32-bit word without using proper accessors, fix this, and because a length cannot be negative, use unsigned int while at it. Fixes: 9cde94506eac ("bgmac: implement scatter/gather support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01net: bgmac: Correctly annotate register spaceFlorian Fainelli
All the members: base, idm_base and nicpm_base should be annotated with __iomem since they are pointers to register space. This fixes a bunch of sparse reported warnings. Fixes: f6a95a24957a ("net: ethernet: bgmac: Add platform device support") Fixes: dd5c5d037f5e ("net: ethernet: bgmac: add NS2 support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01route: check sysctl_fib_multipath_use_neigh earlier than hashXin Long
Prior to this patch, when one packet is hashed into path [1] (hash <= nh_upper_bound) and it's neigh is dead, it will try path [2]. However, if path [2]'s neigh is alive but it's hash > nh_upper_bound, it will not return this alive path. This packet will never be sent even if path [2] is alive. 3.3.3.1/24: nexthop via 1.1.1.254 dev eth1 weight 1 <--[1] (dead neigh) nexthop via 2.2.2.254 dev eth2 weight 1 <--[2] With sysctl_fib_multipath_use_neigh set is supposed to find an available path respecting to the l3/l4 hash. But if there is no available route with this hash, it should at least return an alive route even with other hash. This patch is to fix it by processing fib_multipath_use_neigh earlier than the hash check, so that it will at least return an alive route if there is when fib_multipath_use_neigh is enabled. It's also compatible with before when there are alive routes with the l3/l4 hash. Fixes: a6db4494d218 ("net: ipv4: Consider failed nexthops in multipath routes") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01fix typo in command value in drivers/net/phy/mdio-bitbang.Frans Meulenbroeks
mdio-bitbang mentioned 10 for both read and write. However mdio read opcode is 10 and write opcode is 01 Fixed comment. Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01sky2: Increase D3 delay to sky2 stops working after suspendKai-Heng Feng
The sky2 ethernet stops working after system resume from suspend: [ 582.852065] sky2 0000:04:00.0: Refused to change power state, currently in D3 The current 150ms delay is not enough, change it to 200ms can solve the issue. BugLink: https://bugs.launchpad.net/bugs/1758507 Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01net/mlx5e: Set EQE based as default TX interrupt moderation modeTal Gilboa
The default TX moderation mode was mistakenly set to CQE based. The intention was to add a control ability in order to improve some specific use-cases. In general, we prefer to use EQE based moderation as it gives much better numbers for the common cases. CQE based causes a degradation in the common case since it resets the moderation timer on CQE generation. This causes an issue when TSO is well utilized (large TSO sessions). The timer is set to 16us so traffic of ~64KB TSO sessions per second would mean timer reset (CQE per TSO session -> long time between CQEs). In this case we quickly reach the tcp_limit_output_bytes (256KB by default) and cause a halt in TX traffic. By setting EQE based moderation we make sure timer would expire after 16us regardless of the packet rate. This fixes an up to 40% packet rate and up to 23% bandwidth degradtions. Fixes: 0088cbbc4b66 ("net/mlx5e: Enable CQE based moderation on TX CQ") Signed-off-by: Tal Gilboa <talgi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01ibmvnic: Disable irqs before exiting reset from closed stateJohn Allen
When the driver is closed, all the associated irqs are disabled. In the event that the driver exits a reset in the closed state, we should be consistent with the state we are in directly after a close. So before we exit the reset routine, all irqs should be disabled as well. This will prevent the irqs from being enabled twice in this case and reporting a number of noisy warning traces. Signed-off-by: John Allen <jallen@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01net: sched: do not emit messages while holding spinlockLi RongQing
move messages emitting out of sch_tree_lock to avoid holding this lock too long. Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01vlan: also check phy_driver ts_info for vlan's real deviceHangbin Liu
Just like function ethtool_get_ts_info(), we should also consider the phy_driver ts_info call back. For example, driver dp83640. Fixes: 37dd9255b2f6 ("vlan: Pass ethtool get_ts_info queries to real device.") Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01sparc64: Properly range check DAX completion indexRob Gardner
Each Oracle DAX CCB has a corresponding completion area, and the required number of areas must fit within a previously allocated array of completion areas beginning at the requested index. Since the completion area index is specified by a file offset, a user can pass arbitrary values, including negative numbers. So the index must be thoroughly range checked to prevent access to addresses outside the bounds of the allocated completion area array. The index cannot be negative, and it cannot exceed the total array size, less the number of CCBs requested. The old code did not check for negative values and was off by one on the upper bound. Signed-off-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: Jonathan Helman <jonathan.helman@oracle.com> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcDavid S. Miller
2018-04-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c, we had some overlapping changes: 1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE --> MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE 2) In 'net-next' params->log_rq_size is renamed to be params->log_rq_mtu_frames. 3) In 'net-next' params->hard_mtu is added. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2018-04-01 Here's (most likely) the last bluetooth-next pull request for the 4.17 kernel: - Remove unused btuart_cs driver (replaced by serial_cs + hci_uart) - New USB ID for Edimax EW-7611ULB controller - Cleanups & fixes to hci_bcm driver - Clenups to btmrvl driver Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01Linux 4.16v4.16Linus Torvalds
2018-04-01Bluetooth: Mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-04-01Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_QCA_ROMEVic Wei
QCA Rome controllers can do both LE scan and BR/EDR inquiry at once. Signed-off-by: Vic Wei <vwei@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-04-01Bluetooth: btrsi: remove unused including <linux/version.h>Wei Yongjun
Remove including <linux/version.h> that don't need it. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-04-01Bluetooth: hci_bcm: Remove DMI quirk for the MINIX Z83-4Ian W MORRISON
As Interrupt resource specified IRQs are now assumed to be always active-low the DMI quirk for the MINIX Z83-4 is no longer required. Signed-off-by: Ian W MORRISON <ianwmorrison@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-04-01Merge branch 'sh_eth-remove-SH_ETH_OFFSET_INVALID-abuses'David S. Miller
Sergei Shtylyov says: ==================== sh_eth: remove SH_ETH_OFFSET_INVALID abuses Here's a set of 2 patches against DaveM's 'net-next.git' repo. They get rid of the abuse of SH_ETH_OFFSET_INVALID for the register existence checks, so that only its necessary uses would remain... ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01sh_eth: kill useless check in __sh_eth_get_regs()Sergei Shtylyov
Iff TSU registers exist on a given [G]Ether controller, they always include the CAM entry table registers (TSU_ADR{H|L}<n>), thus the check for invalid TSU_ADRH0 offset in __sh_eth_get_regs() is useless... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01sh_eth: add sh_eth_cpu_data::no_xdfar flagSergei Shtylyov
The commit 6ded286555c2 ("sh_eth: Fix RX recovery on R-Car in case of RX ring underrun") added a check for an bad RDFAR offset in sh_eth_rx(), so that the code could work on the R-Car Ether controllers which don't have this register (and TDFAR), then the commit 3365711df02 ("sh_eth: WARN on access to a register not implemented in a particular chip") replaced offset 0 with 0xffff. Adding/checking the 'no_xdfar' bit field in the 'struct sh_eth_cpu_data' instead results in less object code... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01Merge branch 'inet-factorize-sk_wmem_alloc-updates'David S. Miller
Eric Dumazet says: ==================== inet: factorize sk_wmem_alloc updates While testing my inet defrag changes, I found that senders could spend ~20% of cpu cycles in skb_set_owner_w() updating sk->sk_wmem_alloc for every fragment they cook, competing with TX completion of prior skbs possibly happening on another cpus. One solution to this problem is to use alloc_skb() instead of sock_wmalloc() and manually perform a single sk_wmem_alloc change. This greatly increases speed for applications sending big UDP datagrams. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data()Eric Dumazet
While testing my inet defrag changes, I found that the senders could spend ~20% of cpu cycles in skb_set_owner_w() updating sk->sk_wmem_alloc for every fragment they cook, competing with TX completion of prior skbs possibly happening on another cpus. The solution to this problem is to use alloc_skb() instead of sock_wmalloc() and manually perform a single sk_wmem_alloc change. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01ipv4: factorize sk_wmem_alloc updates done by __ip_append_data()Eric Dumazet
While testing my inet defrag changes, I found that the senders could spend ~20% of cpu cycles in skb_set_owner_w() updating sk->sk_wmem_alloc for every fragment they cook. The solution to this problem is to use alloc_skb() instead of sock_wmalloc() and manually perform a single sk_wmem_alloc change. Similar change for IPv6 is provided in following patch. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01Revert "net: usb: asix88179_178a: de-duplicate code"David S. Miller
This reverts commit cf29bded91f9153208c4c2145d602cd82430ad1a. It causes regressions. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01ip6_gre: remove redundant 'tunnel' setting in ip6erspan_tap_init()Alexey Kodanev
'tunnel' was already set at the start of ip6erspan_tap_init(). Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01net/mlx4_en: CHECKSUM_COMPLETE support for fragmentsEric Dumazet
Refine the RX check summing handling to propagate the hardware provided checksum so that we do not have to compute it later in software. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Acked-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01Merge branch 'mlxsw-cleanups'David S. Miller
Ido Schimmel says: ==================== mlxsw: Various cleanups The first nine patches from Jiri perform small and unrelated cleanups. The largest being the conversion of the KVD linear partitions from a list to an array, which simplifies the code. The last patch from Petr is a bug fix for a recent net-next commit that prevented the "kvd" resource from being marked as the parent of its various child resources (e.g., "/kvd/linear"). v2: Dropped devlink patch following David's comment. Will be sent separately. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01mlxsw: spectrum: Don't use resource ID of 0Petr Machata
In commit 145307460ba9 ("devlink: Remove top_hierarchy arg to devlink_resource_register"), the "top_hierarchy" parameter to devlink_resource_register() was removed in favor of using the parameter "parent_resource_id" exclusively to determine who the parent is. The root node's resource ID for this purpose is DEVLINK_RESOURCE_ID_PARENT_TOP with the value 0. It is therefore problematic that the resource MLXSW_SP_RESOURCE_KVD has also ID of 0. Fix this by numbering driver-specific resources from 1. Fixes: 145307460ba9 ("devlink: Remove top_hierarchy arg to devlink_resource_register") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01mlxsw: spectrum: Pass mlxsw_core as arg of mlxsw_sp_kvdl_resources_register()Jiri Pirko
Pass struct mlxsw_core instead of devlink since it is nicer within mlxsw code and we need both structs in mlxsw_sp_kvdl_resources_register() anyway. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 00:14:28 +0000