| Age | Commit message (Collapse) | Author |
|---|
|
At this point these fields aren't used for anything, so we can remove
them.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We fundamentally do not have a maximum segement size for devices with a
virt boundary. So don't bother checking it, especially given that the
existing checks didn't properly work to start with as we never fully
update the front/back segment size and miss the bi_seg_front_size that
wuld have been required for some cases.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We currently fail to update the front/back segment size in the bio when
deciding to allow an otherwise gappy segement to a device with a
virt boundary. The reason why this did not cause problems is that
devices with a virt boundary fundamentally don't use segments as we
know it and thus don't care. Make that assumption formal by forcing
an unlimited segement size in this case.
Fixes: f6970f83ef79 ("block: don't check if adjacent bvecs in one bio can be mergeable")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently ll_merge_requests_fn, unlike all other merge functions,
reduces nr_phys_segments by one if the last segment of the previous,
and the first segment of the next segement are contigous. While this
seems like a nice solution to avoid building smaller than possible
requests it causes a mismatch between the segments actually present
in the request and those iterated over by the bvec iterators, including
__rq_for_each_bio. This can for example mistrigger the single segment
optimization in the nvme-pci driver, and might lead to mismatching
nr_phys_segments number when recalculating the number of request
when inserting a cloned request.
We could possibly work around this by making the bvec iterators take
the front and back segment size into account, but that would require
moving them from the bio to the bio_iter and spreading this mess
over all users of bvecs. Or we could simply remove this optimization
under the assumption that most users already build good enough bvecs,
and that the bio merge patch never cared about this optimization
either. The latter is what this patch does.
dff824b2aadb ("nvme-pci: optimize mapping of small single segment requests").
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This barrier only applies to the read-modify-write operations; in
particular, it does not apply to the atomic_set() primitive.
Replace the barrier with an smp_mb().
Fixes: 6c0ca7ae292ad ("sbitmap: fix wakeup hang after sbq resize")
Cc: stable@vger.kernel.org
Reported-by: "Paul E. McKenney" <paulmck@linux.ibm.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: linux-block@vger.kernel.org
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This barrier only applies to the read-modify-write operations; in
particular, it does not apply to the atomic_set() primitive.
Replace the barrier with an smp_mb().
Fixes: dac56212e8127 ("bio: skip atomic inc/dec of ->bi_cnt for most use cases")
Cc: stable@vger.kernel.org
Reported-by: "Paul E. McKenney" <paulmck@linux.ibm.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: linux-block@vger.kernel.org
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Justin Sanders, who has extensive experience with ATA over Ethernet
in general and AoE SCSI and block-device drivers in particular, is
ready to take on the role of aoe maintainer. The driver needs a more
active maintainer.
Signed-off-by: Ed Cashin <ed.cashin@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add the synopsys ethernet mac controller embedded in the g12a SoC family.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The flow_rule is only used when configuring the classification tables,
and should be free'd once we're done using it. The current code only
frees it in the error path.
Fixes: 90b509b39ac9 ("net: mvpp2: cls: Add Classification offload support")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The conversion of acpi/enumeration.txt to RST included one markup error,
leading to many warnings like:
.../firmware-guide/acpi/enumeration.rst:430: WARNING: Unexpected indentation.
Add the missing colon and create some peace.
Fixes: c24bc66e8157 ("Documentation: ACPI: move enumeration.txt to firmware-guide/acpi and convert to reST")
Cc: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Commit 043b3f7b6388 ("lib/list_sort: simplify and remove
MAX_LIST_LENGTH_BITS") added some useful kerneldoc info, but also broke the
docs build:
./lib/list_sort.c:128: WARNING: Definition list ends without a blank line; unexpected unindent.
./lib/list_sort.c:161: WARNING: Unexpected indentation.
./lib/list_sort.c:162: WARNING: Block quote ends without a blank line; unexpected unindent.
Fix the offending literal block and make the error go away.
Fixes: 043b3f7b6388 ("lib/list_sort: simplify and remove MAX_LIST_LENGTH_BITS")
Cc: George Spelvin <lkml@sdf.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Commit 13bac55ef7ae ("doc/mm: New documentation for memory performance")
added numaperf.rst, but did not add it to the TOC tree. There was also an
incorrectly marked literal block leading to this warning sequence:
numaperf.rst:24: WARNING: Unexpected indentation.
numaperf.rst:24: WARNING: Inline substitution_reference start-string without end-string.
numaperf.rst:25: WARNING: Block quote ends without a blank line; unexpected unindent.
Fix the block and add the file to the document tree.
Fixes: 13bac55ef7ae ("doc/mm: New documentation for memory performance")
Cc: Keith Busch <keith.busch@intel.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
AutoReporter is going away; recent versions of sphinx emit a warning like:
Documentation/sphinx/kerneldoc.py:125:
RemovedInSphinx20Warning: AutodocReporter is now deprecated.
Use sphinx.util.docutils.switch_source_input() instead.
Make the switch. But switch_source_input() only showed up in 1.7, so we
have to do ugly version checks to keep things working in older versions.
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Recent versions of sphinx will emit messages like:
Documentation/sphinx/kerneldoc.py:103:
RemovedInSphinx20Warning: app.warning() is now deprecated.
Use sphinx.util.logging instead.
Switch to sphinx.util.logging to make this unsightly message go away.
Alas, that interface was only added in version 1.6, so we have to add a
version check to keep things working with older sphinxes.
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Pull documentation fixes from Jonathan Corbet:
"A handful of fixes for a docs build problem, along with catching the
spdxcheck.py script up with the current state of affairs"
* tag 'docs-5.2-fixes' of git://git.lwn.net/linux:
Documentation: kdump: fix minor typo
scripts/spdxcheck.py: Add dual license subdirectory
scripts/spdxcheck.py: Fix path to deprecated licenses
counter: fix Documentation build error due to incorrect source file name
|
|
We already mitigate erratum 1188873 affecting Cortex-A76 and
Neoverse-N1 r0p0 to r2p0. It turns out that revisions r0p0 to
r3p1 of the same cores are affected by erratum 1418040, which
has the same workaround as 1188873.
Let's expand the range of affected revisions to match 1418040,
and repaint all occurences of 1188873 to 1418040. Whilst we're
there, do a bit of reformating in silicon-errata.txt and drop
a now unnecessary dependency on ARM_ARCH_TIMER_OOL_WORKAROUND.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The R_AARCH64_PREL16 and R_AARCH64_PREL32 relocations are
documented as permitting a range of [-2^15 .. 2^16), resp.
[-2^31 .. 2^32). It is also documented that this means we
cannot detect overflow in some cases, which is bad.
Since we always interpret the targets of these relocations as
signed quantities (e.g., in the ksymtab handling code), let's
tighten the overflow checks so that targets that are out of
range for our signed interpretation of the relocated quantity
get flagged.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
There is no chance to wait spi message complete if failed to
prepare_transfer_hardware(). Therefore, finalize this message and abort
transfer with corresponding return status to release this block case.
Logs:
[17400.283005] c7 3267 PM: PM: suspend entry 2019-05-04 03:01:14.403097147 UTC
[17400.283013] c7 3267 PM: suspend entry (deep)
[17400.283016] c6 3267 PM: Syncing filesystems ... done.
[17400.584395] c1 753 spi_geni 890000.spi: spi_geni_prepare_transfer_hardware:Error enabling SE resources -13
[17400.584404] c1 753 spi_master spi1: failed to prepare transfer hardware
[17400.664611] c4 3267 PM: PM: suspend exit 2019-05-04 03:01:15.235273018 UTC
Flow:
__spi_sync@spi.c
| if (status == 0) {
| /* Push out the messages in the calling context if we
| * can.
| */
| if (ctlr->transfer == spi_queued_transfer) {
| SPI_STATISTICS_INCREMENT_FIELD(&ctlr->statistics,
| spi_sync_immediate);
| SPI_STATISTICS_INCREMENT_FIELD(&spi->statistics,
| spi_sync_immediate);
| __spi_pump_messages(ctlr, false);
| }
|
| wait_for_completion(&done); <== stuck here!!!
| status = message->status;
| }
| message->context = NULL;
| return status;
|
--> __spi_pump_messages@spi.c
| if (!was_busy && ctlr->prepare_transfer_hardware) {
| ret = ctlr->prepare_transfer_hardware(ctlr);
| if (ret) {
| dev_err(&ctlr->dev,
| "failed to prepare transfer hardware\n");
|
| if (ctlr->auto_runtime_pm)
| pm_runtime_put(ctlr->dev.parent);
| mutex_unlock(&ctlr->io_mutex);
| return;
| }
| }
|
--> spi_geni_prepare_transfer_hardware@spi-geni-qcom.c
| ret = pm_runtime_get_sync(mas->dev);
| if (ret < 0) {
| dev_err(mas->dev,
| "%s:Error enabling SE resources %d\n",
| __func__, ret);
| pm_runtime_put_noidle(mas->dev);
| goto exit_prepare_transfer_hardware;
Signed-off-by: Super Liu <supercjliu@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
i.MX8MM has clock gate for SNVS module, add clock info to SNVS
RTC node for clock management.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
i.MX8MM has clock gate for each GPIO bank, add clock info
to GPIO node for clock management.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This is documented in the reference manuals as GIC_CLK_ROOT.
In some out-of-tree DVFS scenarios the gic clock can end up as the only
user of sys_pll2 so if we don't define the gic clk explicitly it might
be turned off.
This applies to both 8mq and 8mm: same clk register but diffferent
parents.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This should be defined in the clock tree so that parents are not
shutdown by accident
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Both rev C and rev B of the board come with two QSPI-NOR chips
attached to the SoC. Add DT code describing all of this.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
UART2 is connected to PTD22/23, not PTD0/1. Fix corresponding pinmux
node.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
If IOMMU_SUPPORT is not enabled (and therefore IOMMU_API is not
selected), struct iommu_fwspec is an empty struct and
IOMMU_FWSPEC_PCI_RC_ATS is not defined, resulting in the following
compilation errors:
drivers/acpi/arm64/iort.c: In function iort_iommu_configure:
drivers/acpi/arm64/iort.c:1079:21: error: struct iommu_fwspec has no member named flag:
dev->iommu_fwspec->flags |= IOMMU_FWSPEC_PCI_RC_ATS;
^~
drivers/acpi/arm64/iort.c:1079:32: error: IOMMU_FWSPEC_PCI_RC_ATS
undeclared (first use in this function)
dev->iommu_fwspec->flags |= IOMMU_FWSPEC_PCI_RC_ATS;
^~~~~~~~~~~~~~~~~~~~~~~
drivers/acpi/arm64/iort.c:1079:32: note: each undeclared identifier is reported only once for each function it appears in
Move iort_iommu_configure() (and the helpers functions it relies on)
into CONFIG_IOMMU_API preprocessor guarded code so that when
CONFIG_IOMMU_SUPPORT is not enabled we prevent compiling code that is
basically equivalent to no-OP, fixing the build errors.
Cc: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/linux-arm-kernel/20190515034253.79348-1-wangkefeng.wang@huawei.com/
Fixes: 5702ee24182f ("ACPI/IORT: Check ATS capability in root complex nodes")
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The following commit
7290d5809571 ("module: use relative references for __ksymtab entries")
updated the ksymtab handling of some KASLR capable architectures
so that ksymtab entries are emitted as pairs of 32-bit relative
references. This reduces the size of the entries, but more
importantly, it gets rid of statically assigned absolute
addresses, which require fixing up at boot time if the kernel
is self relocating (which takes a 24 byte RELA entry for each
member of the ksymtab struct).
Since ksymtab entries are always part of the same module as the
symbol they export, it was assumed at the time that a 32-bit
relative reference is always sufficient to capture the offset
between a ksymtab entry and its target symbol.
Unfortunately, this is not always true: in the case of per-CPU
variables, a per-CPU variable's base address (which usually differs
from the actual address of any of its per-CPU copies) is allocated
in the vicinity of the ..data.percpu section in the core kernel
(i.e., in the per-CPU reserved region which follows the section
containing the core kernel's statically allocated per-CPU variables).
Since we randomize the module space over a 4 GB window covering
the core kernel (based on the -/+ 4 GB range of an ADRP/ADD pair),
we may end up putting the core kernel out of the -/+ 2 GB range of
32-bit relative references of module ksymtab entries that refer to
per-CPU variables.
So reduce the module randomization range a bit further. We lose
1 bit of randomization this way, but this is something we can
tolerate.
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Revisions of the Cortex-A76 CPU prior to r4p0 are affected by an erratum
that can prevent interrupts from being taken when single-stepping.
This patch implements a software workaround to prevent userspace from
effectively being able to disable interrupts.
Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
During an oops, we print the name of the current task and its pid twice.
We also helpfully advertise its stack limit as "0x(____ptrval____)".
Drop these useless messages.
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Add video capture support from the OV5642 to IPU CSI0 on
the i.MX53 SMD.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
[fabio: remove unnecessary 'regulator-always-on' from camera regulators]
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add video capture_subsystem device node, and include both CSI ports.
Prepare for adding sensors by adding the parallel sensor anchor endpoints
to the CSI ports.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This patch adds USB dt nodes for LS1028A.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
While properties and child nodes with the same name are valid DT, the
practice is not encouraged. Furthermore, the collision is problematic for
YAML encoded DT. Let's just avoid the issue and rename the nodes.
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
I measured power consumption between power_save_node=1 and power_save_node=0.
It's almost the same.
Codec will enter to runtime suspend and suspend.
That pin also will enter to D3. Don't need to enter to D3 by single pin.
So, Disable power_save_node as default. It will avoid more issues.
Windows Driver also has not this option at runtime PM.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
i.MX8MM has clock gate for SNVS module, add it into clock tree
for SNVS RTC driver to manage.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add macro for the SNVS clock of the i.MX8MM.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
ip_sf_list_clear_all() needs to be defined even if !CONFIG_IP_MULTICAST
Fixes: 3580d04aa674 ("ipv4/igmp: fix another memory leak in igmpv3_del_delrec()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit b6664ba42f14 ("s390, kexec_file: drop arch_kexec_mem_walk()")
changed kexec_add_buffer() to skip searching for a memory location if
kexec_buf.mem is already set, and use the address that is there.
In powerpc code we reuse a kexec_buf variable for loading both the
kernel and the initramfs by resetting some of the fields between those
uses, but not mem. This causes kexec_add_buffer() to try to load the
kernel at the same address where initramfs will be loaded, which is
naturally rejected:
# kexec -s -l --initrd initramfs vmlinuz
kexec_file_load failed: Invalid argument
Setting the mem field before every call to kexec_add_buffer() fixes
this regression.
Fixes: b6664ba42f14 ("s390, kexec_file: drop arch_kexec_mem_walk()")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
into drm-fixes
Fixes for 5.2:
- Fix for DMCU firmware issues for stable
- Add missing polaris10 pci id to kfd
- Screen corruption fix on picasso
- Fix for driver reload on vega10
- SR-IOV fixes
- Locking fix in new SMU code
- Compute profile switching fix for KFD
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522205425.3657-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
- sun4i fixes to hdmi phy as well as u16 overflow in dsi (left from -next-fixes)
- gma500 fix to make lvds detection more reliable
- select devfreq for panfrost since it can't probe without it
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522194440.GA22359@art_vandelay
|
|
git://people.freedesktop.org/~thomash/linux into drm-fixes
A set of misc fixes for various issues that have surfaced recently.
All Cc'd stable except the dma iterator fix which shouldn't really cause
any real issues on older kernels.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Thomas Hellstrom (VMware)" <thomas@shipmail.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522115408.33185-1-thomas@shipmail.org
|
|
On rbtx4927:
BUG: Bad page state in process swapper pfn:00001
page:804b7820 refcount:0 mapcount:-128 mapping:00000000 index:0x1
flags: 0x0()
raw: 00000000 00000100 00000200 00000000 00000001 00000000 ffffff7f 00000000
page dumped because: nonzero mapcount
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.2.0-rc1-rbtx4927-00468-g3c05ea3d4077b756 #141
Stack : 00000000 10008400 8040dc4c 87c1b974 8044af63 8040dc4c 00000001 804a3490
00000001 81000000 0030f231 80148558 00000003 10008400 87c1dd80 3d0f9a2c
00000000 00000000 804b0000 00000000 00000007 00000000 00000081 00000000
62722d31 00000080 804b0000 39347874 00000000 804b7820 8040ce18 81000010
00000001 00000007 00000001 81000000 00000018 8021de24 00000000 804a0000
...
Call Trace:
[<8010adec>] show_stack+0x74/0x104
[<801a5e44>] bad_page+0x130/0x138
[<801a654c>] free_pcppages_bulk+0x17c/0x3b0
[<801a789c>] free_unref_page+0x40/0x68
[<801120f4>] free_init_pages+0xec/0x104
[<803bdde8>] free_initmem+0x10/0x58
[<803bdb8c>] kernel_init+0x20/0x100
[<801057c8>] ret_from_kernel_thread+0x14/0x1c
As of commit b93ddc4f9156205e ("mips: Reserve memory for the kernel
image resources"), bootmem_init() no longer reserves the memory below
the kernel, while prom_free_prom_memory() still frees it.
Fix this by reverting commit b6263ff2d6e58cc2 ("MIPS: TXx9: Implement
prom_free_prom_memory").
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Fixes: b93ddc4f9156205e ("mips: Reserve memory for the kernel image resources")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Maciej W . Rozycki <macro@linux-mips.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
|
|
Commit 9cc342f6c4a0 ("treewide: prefix header search paths with
$(srctree)/") caused a build error for MIPS VDSO.
CC arch/mips/vdso/gettimeofday.o
In file included from ../arch/mips/vdso/vdso.h:26,
from ../arch/mips/vdso/gettimeofday.c:11:
../arch/mips/include/asm/page.h:12:10: fatal error: spaces.h: No such file or directory
#include <spaces.h>
^~~~~~~~~~
The cause of the error is a missing space after the compiler flag -I .
Kbuild used to have a global restriction "no space after -I", but
commit 48f6e3cf5bc6 ("kbuild: do not drop -I without parameter") got
rid of it. Having a space after -I is no longer a big deal as far as
Kbuild is concerned.
It is still a big deal for MIPS because arch/mips/vdso/Makefile
filters the header search paths, like this:
ccflags-vdso := \
$(filter -I%,$(KBUILD_CFLAGS)) \
..., which relies on the assumption that there is no space after -I .
Fixes: 9cc342f6c4a0 ("treewide: prefix header search paths with $(srctree)/")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
|
|
To meet the 'i' (immediate) constraint for the asm operands,
this function must be always inlined.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-kernel@vger.kernel.org
|
|
The Mali GPU is supplied by VDD_EE which is provided by the DCDC2
regulator.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The DCDC2 regulator output is actually called "VDD_EE" in various
Meson8b board schematics. This matches with what Amlogic names it in the
most part of their vendor kernel (there are a few places where it's
actually called VDDAO, schematics of EC-100 suggest that the regulator
output is used for both signals).
While here, also give the regulator an alias as it supplies the Mali GPU
so a phandle to it will be required later on.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Add the canvas module to Meson8b because it's required for the VPU
(video output) and video decoders.
The canvas module is located inside the "DMC bus" (where also some of
the memory controller registers are located). The "DMC bus" itself is
part of the so-called "MMC bus".
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
With the Meson8m2 SoC the canvas module was moved from offset 0x20
(Meson8) to offset 0x48 (same as on Meson8b). The offsets inside the
canvas module are identical.
Correct the offset so the driver uses the correct registers.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Add the canvas module to Meson8 because it's required for the VPU
(video output) and video decoders.
The canvas module is located inside thie "DMC bus" (where also some of
the memory controller registers are located). The "DMC bus" itself is
part of the so-called "MMC bus".
Amlogic's vendor kernel has an explicit #define for the "DMC" register
range on Meson8m2 while there's no such #define for Meson8. However, the
canvas and memory controller registers on Meson8 are all expressed as
"0x6000 + actual offset", while Meson8m2 uses "DMC + actual offset".
Thus it's safe to assume that the DMC bus exists on both SoCs even
though the registers inside are slightly different.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
syzbot reported memory leaks [1] that I have back tracked to
a missing cleanup from igmpv3_del_delrec() when
(im->sfmode != MCAST_INCLUDE)
Add ip_sf_list_clear_all() and kfree_pmc() helpers to explicitely
handle the cleanups before freeing.
[1]
BUG: memory leak
unreferenced object 0xffff888123e32b00 (size 64):
comm "softirq", pid 0, jiffies 4294942968 (age 8.010s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 e0 00 00 01 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000006105011b>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline]
[<000000006105011b>] slab_post_alloc_hook mm/slab.h:439 [inline]
[<000000006105011b>] slab_alloc mm/slab.c:3326 [inline]
[<000000006105011b>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
[<000000004bba8073>] kmalloc include/linux/slab.h:547 [inline]
[<000000004bba8073>] kzalloc include/linux/slab.h:742 [inline]
[<000000004bba8073>] ip_mc_add1_src net/ipv4/igmp.c:1961 [inline]
[<000000004bba8073>] ip_mc_add_src+0x36b/0x400 net/ipv4/igmp.c:2085
[<00000000a46a65a0>] ip_mc_msfilter+0x22d/0x310 net/ipv4/igmp.c:2475
[<000000005956ca89>] do_ip_setsockopt.isra.0+0x1795/0x1930 net/ipv4/ip_sockglue.c:957
[<00000000848e2d2f>] ip_setsockopt+0x3b/0xb0 net/ipv4/ip_sockglue.c:1246
[<00000000b9db185c>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616
[<000000003028e438>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3130
[<0000000015b65589>] __sys_setsockopt+0x98/0x120 net/socket.c:2078
[<00000000ac198ef0>] __do_sys_setsockopt net/socket.c:2089 [inline]
[<00000000ac198ef0>] __se_sys_setsockopt net/socket.c:2086 [inline]
[<00000000ac198ef0>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086
[<000000000a770437>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301
[<00000000d3adb93b>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 9c8bb163ae78 ("igmp, mld: Fix memory leak in igmpv3/mld_del_delrec()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Michael Chan says:
===================
bnxt_en: Bug fixes.
There are 4 driver fixes in this series:
1. Fix RX buffer leak during OOM condition.
2. Call pci_disable_msix() under correct conditions to prevent hitting BUG.
3. Reduce unneeded mmeory allocation in kdump kernel to prevent OOM.
4. Don't read device serial number on VFs because it is not supported.
Please queue #1, #2, #3 for -stable as well. Thanks.
===================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
