summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-05-26brd: get rid of unused members from struct brd_deviceNamhyung Kim
brd_refcnt, brd_offset, brd_sizelimit and brd_blocksize in struct brd_device seem to be copied from struct loop_device but they're not used anywhere. Let get rid of them. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-26Fix build with !HUGETLBFSLinus Torvalds
I stupidly broke the case of CONFIG_HUGETLBFS=n when doing the conversion to vm_flags_t in commit ca16d140af91 ("mm: don't access vm_flags as 'int'"). And my 'allyesconfig' build didn't find it, for obvious reasons.. Include <linux/mm_types.h> in <linux/hugetlb.h>. The problem could have been avoided by just turning the hugetlb_file_setup() error wrapper into a macro, but mm_types.h is a reasonable include in this file. Reported-by: Richard -rw- Weinberger <richard.weinberger@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26block: fix oops on !disk->queue and sysfs discard alignment displayJens Axboe
Eric Dumazet reports: ---- At boot, I have a crash in part_discard_alignment_show+0x1b/0x50 CR2 : 000006ac fault in : mov 0x2c(%rcx),%edx I suspect commit 23ceb5b7719e9276d4 (block: Remove extra discard_alignment from hd_struct) being in fault ---- Not quite known how ->queue can be NULL while the sysfs entry exists, but lets play it safe and check for a NULL queue. The rest of the sysfs show strategies in check.c do not dereference disk->queue. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-26bug.h: Move ratelimit warn interfaces to ratelimit.hDavid S. Miller
As reported by Ingo Molnar, we still have configuration combinations where use of the WARN_RATELIMIT interfaces break the build because dependencies don't get met. Instead of going down the long road of trying to make it so that ratelimit.h can get included by kernel.h or asm-generic/bug.h, just move the interface into ratelimit.h and make users have to include that. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
2011-05-26bonding: cleanup module option descriptionsAndy Gospodarek
Weiping Pan noticed that the module option description for xmit_hash_policy was incorrect and was nice enough to post a patch to fix it. The text was correct, but created a line over 80 characters and I would rather not add those. I realized I could take a few minutes and clean up all the descriptions and things would look much better. This is the result. Based on patch from Weiping Pan <panweiping3@gmail.com>. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> CC: Weiping Pan <panweiping3@gmail.com> Reviewed-by: Weiping Pan <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-26net:8021q:vlan.c Fix pr_info to just give the vlan fullname and version.Justin Mattock
The below patch removes vlan_buggyright and vlan_copyright from vlan_proto_init, so that it prints out just the fullname of vlan and the version number. before: [ 30.438203] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> [ 30.441542] All bugs added by David S. Miller <davem@redhat.com> after: [ 31.513910] 802.1Q VLAN Support v1.8 Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> CC: Joe Perches <joe@perches.com> CC: David S. Miller <davem@davemloft.net> CC: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-26ARM: kill pmd_off()Russell King
pmd_off() has only one user, so lets consolidate this into its only user. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-26[CIFS] When mandatory encryption on share, fail mountSteve French
When mandatory encryption is configured in samba server on a share (smb.conf parameter "smb encrypt = mandatory") the server will hang up the tcp session when we try to send the first frame after the tree connect if it is not a QueryFSUnixInfo, this causes cifs mount to hang (it must be killed with ctl-c). Move the QueryFSUnixInfo call earlier in the mount sequence, and check whether the SetFSUnixInfo fails due to mandatory encryption so we can return a sensible error (EACCES) on mount. In a future patch (for 2.6.40) we will support mandatory encryption. CC: Stable <stable@kernel.org> Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-26net: davinci_emac: fix dev_err use at probeJohan Hovold
Use platform device rather than net device in dev_err calls before net device has been registered to avoid messages such as (null): DaVinci EMAC: Failed to get EMAC clock Also replace remaining printks in probe with dev_{err,warn}. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-26can: convert to %pK for kptr_restrict supportOliver Hartkopp
As these pointers have been printed without using %p they were missed in the big network kptr_restrict conversion patch %p -> %pK from Dan Rosenberg. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-26net: fix ETHTOOL_SFEATURES compatibility with old ethtool_ops.set_flagsMichał Mirosław
Current code squashes flags to bool - this makes set_flags fail whenever some ETH_FLAG_* equivalent features are set. Fix this. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-26CIFS: Use pid saved from cifsFileInfo in writepages and set_file_sizePavel Shilovsky
We need it to make them work with mandatory locking style because we can fail in a situation like when kernel need to flush dirty pages and there is a lock held by a process who opened file. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-26Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (28 commits) Ocfs2: Teach local-mounted ocfs2 to handle unwritten_extents correctly. ocfs2/dlm: Do not migrate resource to a node that is leaving the domain ocfs2/dlm: Add new dlm message DLM_BEGIN_EXIT_DOMAIN_MSG Ocfs2/move_extents: Set several trivial constraints for threshold. Ocfs2/move_extents: Let defrag handle partial extent moving. Ocfs2/move_extents: move/defrag extents within a certain range. Ocfs2/move_extents: helper to calculate the defraging length in one run. Ocfs2/move_extents: move entire/partial extent. Ocfs2/move_extents: helpers to update the group descriptor and global bitmap inode. Ocfs2/move_extents: helper to probe a proper region to move in an alloc group. Ocfs2/move_extents: helper to validate and adjust moving goal. Ocfs2/move_extents: find the victim alloc group, where the given #blk fits. Ocfs2/move_extents: defrag a range of extent. Ocfs2/move_extents: move a range of extent. Ocfs2/move_extents: lock allocators and reserve metadata blocks and data clusters for extents moving. Ocfs2/move_extents: Add basic framework and source files for extent moving. Ocfs2/move_extents: Adding new ioctl code 'OCFS2_IOC_MOVE_EXT' to ocfs2. Ocfs2/refcounttree: Publicize couple of funcs from refcounttree.c Ocfs2: Add a new code 'OCFS2_INFO_FREEFRAG' for o2info ioctl. Ocfs2: Add a new code 'OCFS2_INFO_FREEINODE' for o2info ioctl. ...
2011-05-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmem * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmem: xen: cleancache shim to Xen Transcendent Memory ocfs2: add cleancache support ext4: add cleancache support btrfs: add cleancache support ext3: add cleancache support mm/fs: add hooks to support cleancache mm: cleancache core ops functions and config fs: add field to superblock to support cleancache mm/fs: cleancache documentation Fix up trivial conflict in fs/btrfs/extent_io.c due to includes
2011-05-26Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: correctly decrement the extent buffer index in xfs_bmap_del_extent xfs: check for valid indices in xfs_iext_get_ext and xfs_iext_idx_to_irec xfs: fix up asserts in xfs_iflush_fork xfs: do not do pointer arithmetic on extent records xfs: do not use unchecked extent indices in xfs_bunmapi xfs: do not use unchecked extent indices in xfs_bmapi xfs: do not use unchecked extent indices in xfs_bmap_add_extent_* xfs: remove if_lastex xfs: remove the unused XFS_BMAPI_RSVBLOCKS flag xfs: do not discard alloc btree blocks xfs: add online discard support
2011-05-26regulator: Fix 88pm8607.c printk format warningRandy Dunlap
Fix printk format warning (seen on x86_64) and change to unsigned output format: drivers/regulator/88pm8607.c:417: warning: format '%d' expects type 'int', but argument 3 has type 'resource_size_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26input: Add support for Qualcomm PMIC8XXX power keyTrilok Soni
Add support for PMIC8XXX power key driven over dedicated KYPD_PWR_N pin. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Trilok Soni <tsoni@codeaurora.org> Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26input: Add Qualcomm pm8xxx keypad controller driverTrilok Soni
Add Qualcomm PMIC8XXX based keypad controller driver supporting upto 18x8 matrix configuration. Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Trilok Soni <tsoni@codeaurora.org> Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Add omap-usbhs runtime PM supportKeshava Munegowda
The usbhs core driver does not enable/disable the interface and functional clocks; These clocks are handled by hwmod and runtime pm, hence insted of the clock enable/disable, the runtime pm APIS are used. however,the port clocks and tll clocks are handled by the usbhs core. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Fix ASIC3 SD Host Controller Configuration sizePaul Parsons
The size of the TC6380AF SD Host Controller Configuration area is 0x200 bytes (assuming registers are aligned on 32-bit boundaries), not 0x400 bytes. Source: Toshiba TC6380AF Specification sections 4.2 and 4.3.1 Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Fix omap_usbhs_alloc_children error handlingAxel Lin
1. Return proper error if omap_usbhs_alloc_child fails 2. In the case of goto err_ehci, we should call platform_device_unregister(ehci) instead of platform_device_put(ehci) because we have already added the platform device to device hierarchy. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Tested-by: Keshava Munegowda <keshava_mgowda@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Fix omap usbhs crash when rmmoding ehci or ohciKeshava Munegowda
The disabling of clocks and freeing GPIO are changed to fix the occurrence of the crash of rmmod of ehci and ohci drivers. The GPIOs should be freed after the spin locks are unlocked. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: stable@kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Add ASIC3 LED supportPaul Parsons
Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26leds: Add ASIC3 LED supportPaul Parsons
Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Update twl4030-code maintainer e-mail addressPeter Ujfalusi
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Correct the name and bitmask for ab8500-gpadc BTempPullUpJohan Palsson
The bitmask for enabling the BatTemp pull-up was wrong and is corrected. The name is also changed to be inline with the AB8500 register description Signed-off-by: Johan Palsson <johan.palsson@stericsson.com> Reviewed-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Add manual ab8500-gpadc batt temp activation for AB8500 3.0Karl Komierowski
In AB8500 3.0 the pull-up supplying the NTC must be manually activated. Add enumerators to chip version detection logic. Signed-off-by: Kalle Komierowski <karl.komierowski@stericsson.com> Reviewed-by: Johan Palsson <johan.palsson@stericsson.com> Reviewed-by: Daniel Willerud <daniel.willerud@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Provide ab8500-core enumerators for chip cutsLinus Walleij
Since functionality in MFD cells may need to be adjusted according to chip revision, let's enumerate them and keep track of them. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Check twl4030-power remove script error condition after i2cwriteLesly A M
Fixing the error condition check in twl4030 remove script function. Due to some typo in commit ID: 11a441ce82d6ffecfd39b324024de0cd630b36c1 Signed-off-by: Lesly A M <leslyam@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Fix twl6030 irq definitionsGraeme Gregory
The charger fault IRQs from the twl will in future patches be handled by a seperate IRQ handler in the charger driver than the general charger IRQ. Give them different IRQ numbers now to allow the charger driver to be merged in the future. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Add phoenix lite (twl6025) support to twl6030Graeme Gregory
Phoenix Lite is based on the twl6030 family of PMICs. It has mostly the same feature set of twl6030 but with small changes. The codec block has also been removed. It also has a new charger block and new features in its ADC block. VUSB handling also differs. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Reviewed-by: Mark Brown <broonie@opensource.wolfsonicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Avoid to use constraint name in 88pm860x regulator driverHaojian Zhuang
Avoid to use constraint name in regulator driver. So use regulator id is used instead in platform driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Remove checking on max8925 regulator[0]Haojian Zhuang
Since regulator[0] is always checking in mfd driver, it results in registration failure without regulator[0]. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Remove unused parameter from 88pm860x APIHaojian Zhuang
i2c_client parameter isn't used in some functions. Just remove it. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Avoid to allocate 88pm860x static platform dataHaojian Zhuang
Maybe multiple PMIC devices are installed into one board. Static variable can only make driver logic mess. So remove these variable, and use platform data from platform driver instead. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Add rtc support to 88pm860xHaojian Zhuang
Enable rtc function in 88pm860x PMIC. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26regulator: Enable max8925 i2c sequence for controlHaojian Zhuang
Force to enable i2c as power up/down sequence. Otherwise, SD/LDO can't be enabled or disabled via accessing i2c bus. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26power_supply: Use max8925 platform_data from cellHaojian Zhuang
Avoid to get platform_data from parent device. Get it from mfd cell device instead. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Fix tps6586x GPIO value settingVincent Palatin
In the current code, every time we set a TPS6586x GPIO pin, the tps6586x_gpio_set function is resetting all other GPIO pins. We need to update the right GPIOxOUT bit of the GPIOSET2 register instead of overriding the full value. Tested by setting sequentially GPIO2 and GPIO3 and verifying the pins voltage. Change-Id: I560edde146c5425cce37432c4ee91569eea5adcf Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26MAINTAINERS: Add patterns for pmic 8921 files to MSM subsystemAbhijeet Dharmapurikar
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Add pm8xxx irq supportAbhijeet Dharmapurikar
Add support for the irq controller in Qualcomm 8xxx pmic. The 8xxx interrupt controller provides control for gpio and mpp configured as interrupts in addition to other subdevice interrupts. The interrupt controller also provides a way to read the real time status of an interrupt. This real time status is the only way one can get the input values of gpio and mpp lines. Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Add Qualcomm PMIC 8921 core driverAbhijeet Dharmapurikar
Add support for the Qualcomm PM8921 PMIC chip. The core driver will communicate with the PMIC chip via the MSM SSBI bus. Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Group NXP PCF50633* drivers togetherAxel Lin
PCF50633_ADC and PCF50633_GPIO depends on MFD_PCF50633. Thus group NXP PCF50633* drivers together. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Group TPSxxxxx power management chips togetherAxel Lin
Group TPSxxxxx power management chips together and sort in alphabetical order. This change makes it easier for users to find config options. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: TWL5030 version checking in twl-coreLesly A M
Added API to get the TWL5030 Si version from the IDCODE register. It is used for enabling the workaround for TWL erratum 27. Signed-off-by: Lesly A M <leslyam@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: David Derrick <dderrick@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Modifying the twl4030-power macro name Main_Ref to all capsLesly A M
Modifying the macro name Main_Ref to all caps(MAIN_REF). Suggested by Nishanth Menon <nm@ti.com> Signed-off-by: Lesly A M <leslyam@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: David Derrick <dderrick@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Correct the twl4030-power warning print during script loadingLesly A M
Correcting the if condition check for printing the warning, if wakeup script is not updated before updating the sleep script. Since the flag 'order' is set to '1' while updating the wakeup script for P1P2, the condition checking for printing the warning should be if(!order) (ie: print the warning if wakeup script is not updated before updating the sleep script) Signed-off-by: Lesly A M <leslyam@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: David Derrick <dderrick@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Fix build warning on 88pm860xHaojian Zhuang
WARNING: vmlinux.o(.devinit.text+0x6c4): Section mismatch in reference from the function device_onkey_init() to the (unknown reference) .init.data:(unknown) The function __devinit device_onkey_init() references a (unknown reference) __initdata (unknown). If (unknown) is only used by device_onkey_init then annotate (unknown) with a matching annotation. It's caused by using __initdata on mfd cell resources. Replace __initdata with __devinitdata. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Fix wl1273 warningWanlong Gao
Remove the unused variable "u16 val" of wl1273-core.c. Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Continue with IRQ setup even if we don't have PMIC main IRQMark Brown
The fact that we can't actually raise any interrupts doesn't stop us setting up the IRQs we're exporting. While this isn't actually going to do anything it allows us to proceed further through device setup during board bringup and avoids issues with the MFD core not letting us suppress the configuration of IRQ resources. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-11 15:06:43 +0000