summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-12-10NFSv4.2: Fix 5 seconds delay when doing inter server copyDai Ngo
Since commit b4868b44c5628 ("NFSv4: Wait for stateid updates after CLOSE/OPEN_DOWNGRADE"), every inter server copy operation suffers 5 seconds delay regardless of the size of the copy. The delay is from nfs_set_open_stateid_locked when the check by nfs_stateid_is_sequential fails because the seqid in both nfs4_state and nfs4_stateid are 0. Fix __nfs42_ssc_open to delay setting of NFS_OPEN_STATE in nfs4_state, until after the call to update_open_stateid, to indicate this is the 1st open. This fix is part of a 2 patches, the other patch is the fix in the source server to return the stateid for COPY_NOTIFY request with seqid 1 instead of 0. Fixes: ce0887ac96d3 ("NFSD add nfs4 inter ssc to nfsd4_copy") Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-12-10NFS: Fix rpcrdma_inline_fixup() crash with new LISTXATTRS operationChuck Lever
By switching to an XFS-backed export, I am able to reproduce the ibcomp worker crash on my client with xfstests generic/013. For the failing LISTXATTRS operation, xdr_inline_pages() is called with page_len=12 and buflen=128. - When ->send_request() is called, rpcrdma_marshal_req() does not set up a Reply chunk because buflen is smaller than the inline threshold. Thus rpcrdma_convert_iovs() does not get invoked at all and the transport's XDRBUF_SPARSE_PAGES logic is not invoked on the receive buffer. - During reply processing, rpcrdma_inline_fixup() tries to copy received data into rq_rcv_buf->pages because page_len is positive. But there are no receive pages because rpcrdma_marshal_req() never allocated them. The result is that the ibcomp worker faults and dies. Sometimes that causes a visible crash, and sometimes it results in a transport hang without other symptoms. RPC/RDMA's XDRBUF_SPARSE_PAGES support is not entirely correct, and should eventually be fixed or replaced. However, my preference is that upper-layer operations should explicitly allocate their receive buffers (using GFP_KERNEL) when possible, rather than relying on XDRBUF_SPARSE_PAGES. Reported-by: Olga kornievskaia <kolga@netapp.com> Suggested-by: Olga kornievskaia <kolga@netapp.com> Fixes: c10a75145feb ("NFSv4.2: add the extended attribute proc functions.") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Olga kornievskaia <kolga@netapp.com> Reviewed-by: Frank van der Linden <fllinden@amazon.com> Tested-by: Olga kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-12-10rtnetlink: RCU-annotate both dimensions of rtnl_msg_handlersJakub Kicinski
We use rcu_assign_pointer to assign both the table and the entries, but the entries are not marked as __rcu. This generates sparse warnings. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10Revert "macb: support the two tx descriptors on at91rm9200"Willy Tarreau
This reverts commit 0a4e9ce17ba77847e5a9f87eed3c0ba46e3f82eb. The code was developed and tested on an MSC313E SoC, which seems to be half-way between the AT91RM9200 and the AT91SAM9260 in that it supports both the 2-descriptors mode and a Tx ring. It turns out that after the code was merged I could notice that the controller would sometimes lock up, and only when dealing with sustained bidirectional transfers, in which case it would report a Tx overrun condition right after having reported being ready, and will stop sending even after the status is cleared (a down/up cycle fixes it though). After adding lots of traces I couldn't spot a sequence pattern allowing to predict that this situation would happen. The chip comes with no documentation and other bits are often reported with no conclusive pattern either. It is possible that my change is wrong just like it is possible that the controller on the chip is bogus or at least unpredictable based on existing docs from other chips. I do not have an RM9200 at hand to test at the moment and a few tests run on a more recent 9G20 indicate that this code path cannot be used there to test the code on a 3rd platform. Since the MSC313E works fine in the single-descriptor mode, and that people using the old RM9200 very likely favor stability over performance, better revert this patch until we can test it on the original platform this part of the driver was written for. Note that the reverted patch was actually tested on MSC313E. Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Daniel Palmer <daniel@0x0f.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/netdev/20201206092041.GA10646@1wt.eu/ Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10net: qualcomm: rmnet: Update rmnet device MTU based on real deviceSubash Abhinov Kasiviswanathan
Packets sent by rmnet to the real device have variable MAP header lengths based on the data format configured. This patch adds checks to ensure that the real device MTU is sufficient to transmit the MAP packet comprising of the MAP header and the IP packet. This check is enforced when rmnet devices are created and updated and during MTU updates of both the rmnet and real device. Additionally, rmnet devices now have a default MTU configured which accounts for the real device MTU and the headroom based on the data format. Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Tested-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10selftests: fix poll error in udpgro.shPaolo Abeni
The test program udpgso_bench_rx always invokes the poll() syscall with a timeout of 10ms. If a larger timeout is specified via the command line, udpgso_bench_rx is supposed to do multiple poll() calls till the timeout is expired or an event is received. Currently the poll() loop errors out after the first invocation with no events, and may causes self-tests failure alike: failed GRO with custom segment size ./udpgso_bench_rx: poll: 0x0 expected 0x1 This change addresses the issue allowing the poll() loop to consume all the configured timeout. Fixes: ada641ff6ed3 ("selftests: fixes for UDP GRO") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10PCI: Keep both device and resource name for config space remapsAlexander Lobakin
Follow the rule taken in commit 35bd8c07db2c ("devres: keep both device name and resource name in pretty name") and keep both device and resource names while requesting memory regions for PCI config space to prettify e.g. /proc/iomem output: Before (DWC Host Controller): 18b00000-18b01fff : dbi 18b10000-18b11fff : config 18b20000-18b21fff : dbi 18b30000-18b31fff : config After: 18b00000-18b01fff : 18b00000.pci dbi 18b10000-18b11fff : 18b00000.pci config 18b20000-18b21fff : 18b20000.pci dbi 18b30000-18b31fff : 18b20000.pci config Link: https://lore.kernel.org/r/WbKfdybjZ6xNIUjcC5oC8NcuLqrJfkxQAlnO80ag@cp3-web-020.plabs.ch Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-10net: lapbether: Consider it successful if (dis)connecting when already ↵Xie He
(dis)connected When the upper layer instruct us to connect (or disconnect), but we have already connected (or disconnected), consider this operation successful rather than failed. This can help the upper layer to correct its record about whether we are connected or not here in layer 2. The upper layer may not have the correct information about whether we are connected or not. This can happen if this driver has already been running for some time when the "x25" module gets loaded. Another X.25 driver (hdlc_x25) is already doing this, so we make this driver do this, too. Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Acked-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10igc: Add new device IDSasha Neftin
Add new device ID for the next step of the silicon and reflect the I226_K part. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10selftests/bpf: Fix "dubious pointer arithmetic" testJean-Philippe Brucker
The verifier trace changed following a bugfix. After checking the 64-bit sign, only the upper bit mask is known, not bit 31. Update the test accordingly. Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-12-10selftests/bpf: Fix array access with signed variable testJean-Philippe Brucker
The test fails because of a recent fix to the verifier, even though this program is valid. In details what happens is: 7: (61) r1 = *(u32 *)(r0 +0) Load a 32-bit value, with signed bounds [S32_MIN, S32_MAX]. The bounds of the 64-bit value are [0, U32_MAX]... 8: (65) if r1 s> 0xffffffff goto pc+1 ... therefore this is always true (the operand is sign-extended). 10: (b4) w2 = 11 11: (6d) if r2 s> r1 goto pc+1 When true, the 64-bit bounds become [0, 10]. The 32-bit bounds are still [S32_MIN, 10]. 13: (64) w1 <<= 2 Because this is a 32-bit operation, the verifier propagates the new 32-bit bounds to the 64-bit ones, and the knowledge gained from insn 11 is lost. 14: (0f) r0 += r1 15: (7a) *(u64 *)(r0 +0) = 4 Then the verifier considers r0 unbounded here, rejecting the test. To make the test work, change insn 8 to check the sign of the 32-bit value. Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-12-10selftests/bpf: Add test for signed 32-bit bound check bugJean-Philippe Brucker
After a 32-bit load followed by a branch, the verifier would reduce the maximum bound of the register to 0x7fffffff, allowing a user to bypass bound checks. Ensure such a program is rejected. In the second test, the 64-bit compare should not sufficient to determine whether the signed 32-bit lower bound is 0, so the verifier should reject the second branch. Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-12-10tcp: correctly handle increased zerocopy args struct sizeArjun Roy
A prior patch increased the size of struct tcp_zerocopy_receive but did not update do_tcp_getsockopt() handling to properly account for this. This patch simply reintroduces content erroneously cut from the referenced prior patch that handles the new struct size. Fixes: 18fb76ed5386 ("net-zerocopy: Copy straggler unaligned data for TCP Rx. zerocopy.") Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10bpf: Fix propagation of 32-bit signed bounds from 64-bit bounds.Alexei Starovoitov
The 64-bit signed bounds should not affect 32-bit signed bounds unless the verifier knows that upper 32-bits are either all 1s or all 0s. For example the register with smin_value==1 doesn't mean that s32_min_value is also equal to 1, since smax_value could be larger than 32-bit subregister can hold. The verifier refines the smax/s32_max return value from certain helpers in do_refine_retval_range(). Teach the verifier to recognize that smin/s32_min value is also bounded. When both smin and smax bounds fit into 32-bit subregister the verifier can propagate those bounds. Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") Reported-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-12-10net: mediatek: simplify the return expression of mtk_gmac_sgmii_path_setup()Zheng Yongjun
Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10net/mlx4: simplify the return expression of mlx4_init_srq_table()Zheng Yongjun
Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10net: stmmac: simplify the return tc_delete_knode()Zheng Yongjun
Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10PCI: xgene: Removed unused ".bus_shift" initialisers from pci-xgene.cKrzysztof Wilczyński
Removed unused ".bus_shift" initialisers from pci-xgene.c as xgene_pcie_map_bus() did not use these. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20201129230743.3006978-6-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-10PCI: vmd: Update type of the __iomem pointersKrzysztof Wilczyński
Use "void __iomem" instead "char __iomem" pointer type when working with the accessor functions (with names like readb() or writel(), etc.) to better match a given accessor function signature where commonly the address pointing to an I/O memory region would be a "void __iomem" pointer. Related: https://lwn.net/Articles/102232/ Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20201129230743.3006978-5-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
2020-12-10PCI: iproc: Convert to use the new ECAM constantsKrzysztof Wilczyński
Change interface of the function iproc_pcie_map_ep_cfg_reg() so that use of PCI_SLOT() and PCI_FUNC() macros and most of the local ECAM-specific constants can be dropped, and the new PCIE_ECAM_OFFSET() macro can be used instead. Use the ALIGN_DOWN() macro to ensure that PCI Express ECAM offset is always 32 bit aligned. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20201129230743.3006978-4-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-10PCI: thunder-pem: Add constant for custom ".bus_shift" initialiserKrzysztof Wilczyński
Add a custom constant for the ".bus_shift" initialiser to capture a non-standard platform-specific ECAM bus shift value. Standard values otherwise defined in the PCI Express Specification are available in the include/linux/pci-ecam.h. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20201129230743.3006978-3-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-10PCI: Unify ECAM constants in native PCI Express driversKrzysztof Wilczyński
Add ECAM-related constants to provide a set of standard constants defining memory address shift values to the byte-level address that can be used to access the PCI Express Configuration Space, and then move native PCI Express controller drivers to use the newly introduced definitions retiring driver-specific ones. Refactor pci_ecam_map_bus() function to use newly added constants so that limits to the bus, device function and offset (now limited to 4K as per the specification) are in place to prevent the defective or malicious caller from supplying incorrect configuration offset and thus targeting the wrong device when accessing extended configuration space. This refactor also allows for the ".bus_shift" initialisers to be dropped when the user is not using a custom value as a default value will be used as per the PCI Express Specification. Thanks to Qian Cai <qcai@redhat.com>, Michael Walle <michael@walle.cc>, and Vladimir Oltean <olteanv@gmail.com> for reporting a pci_ecam_create() issue with .bus_shift and to Vladimir for proposing the fix. [bhelgaas: incorporate Vladimir's fix, update commit log] Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20201129230743.3006978-2-kw@linux.com Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-10Merge tag 'linux-can-next-for-5.11-20201210' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2020-12-10 here's a pull request of 7 patches for net-next/master. The first patch is by Oliver Hartkopp for the CAN ISOTP, which adds support for functional addressing. A patch by Antonio Quartulli removes an unneeded unlikely() annotation from the rx-offload helper. The next three patches target the m_can driver. Sean Nyekjaers's patch removes a double clearing of clock stop request bit, Patrik Flykt's patch moves the runtime PM enable/disable to m_can_platform and Jarkko Nikula's patch adds a PCI glue code driver. Fabio Estevam's patch converts the flexcan driver to DT only. And Manivannan Sadhasivam's patchd for the mcp251xfd driver adds internal loopback mode support. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10PCI: Disable PTM during suspend to save powerDavid E. Box
There are systems (for example, Intel based mobile platforms since Coffee Lake) where the power drawn while suspended can be significantly reduced by disabling Precision Time Measurement (PTM) on PCIe root ports as this allows the port to enter a lower-power PM state and the SoC to reach a lower-power idle state. To save this power, disable the PTM feature on root ports during pci_prepare_to_sleep() and pci_finish_runtime_suspend(). The feature will be returned to its previous state during restore and error recovery. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=209361 Link: https://lore.kernel.org/r/20201207223951.19667-2-david.e.box@linux.intel.com Reported-by: Len Brown <len.brown@intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-10PCI/PTM: Save/restore Precision Time Measurement Capability for suspend/resumeDavid E. Box
The PCI subsystem does not currently save and restore the configuration space for the Precision Time Measurement (PTM) Extended Capability leading to the possibility of the feature returning disabled on S3 resume. This has been observed on Intel Coffee Lake desktops. Add save/restore of the PTM control register. This saves the PTM Enable, Root Select, and Effective Granularity bits. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20201207223951.19667-1-david.e.box@linux.intel.com Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-10vxlan: avoid double unlikely() notation when using IS_ERR()Antonio Quartulli
The definition of IS_ERR() already applies the unlikely() notation when checking the error status of the passed pointer. For this reason there is no need to have the same notation outside of IS_ERR() itself. Clean up code by removing redundant notation. Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10dt-bindings: i2c: Update DT binding docs to support SiFive FU740 SoCYash Shah
Add new compatible strings to the DT binding documents to support SiFive FU740-C000. Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-10dt-bindings: i2c: Add compatible string for AM64 SoCAswath Govindraju
Add compatible string for AM64 SoC in device tree binding of OMAP I2C modules as the same IP is used. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-10s390/mm: add support to allocate gigantic hugepages using CMAGerald Schaefer
Commit cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma") added support for allocating gigantic hugepages using CMA, by specifying the hugetlb_cma= kernel parameter, which will disable any boot-time allocation of gigantic hugepages. This patch enables that option also for s390. Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-10s390/crypto: add arch_get_random_long() supportHarald Freudenberger
The random longs to be pulled by arch_get_random_long() are prepared in an 4K buffer which is filled from the NIST 800-90 compliant s390 drbg. By default the random long buffer is refilled 256 times before the drbg itself needs a reseed. The reseed of the drbg is done with 32 bytes fetched from the high quality (but slow) trng which is assumed to deliver 100% entropy. So the 32 * 8 = 256 bits of entropy are spread over 256 * 4KB = 1MB serving 131072 arch_get_random_long() invocations before reseeded. How often the 4K random long buffer is refilled with the drbg before the drbg is reseeded can be adjusted. There is a module parameter 's390_arch_rnd_long_drbg_reseed' accessible via /sys/module/arch_random/parameters/rndlong_drbg_reseed or as kernel command line parameter arch_random.rndlong_drbg_reseed=<value> This parameter tells how often the drbg fills the 4K buffer before it is re-seeded by fresh entropy from the trng. A value of 16 results in reseeding the drbg at every 16 * 4 KB = 64 KB with 32 bytes of fresh entropy pulled from the trng. So a value of 16 would result in 256 bits entropy per 64 KB. A value of 256 results in 1MB of drbg output before a reseed of the drbg is done. So this would spread the 256 bits of entropy among 1MB. Setting this parameter to 0 forces the reseed to take place every time the 4K buffer is depleted, so the entropy rises to 256 bits entropy per 4K or 0.5 bit entropy per arch_get_random_long(). With setting this parameter to negative values all this effort is disabled, arch_get_random long() returns false and thus indicating that the arch_get_random_long() feature is disabled at all. arch_get_random_long() is used by random.c among others to provide an initial hash value to be mixed with the entropy pool on every random data pull. For about 64 bytes read from /dev/urandom there is one call to arch_get_random_long(). So these additional random long values count for performance of /dev/urandom with measurable but low penalty. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-10Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "Two user triggerable crashers and a some EFA related regressions: - Syzkaller found a bug in CM - Restore access to the GID table and fix modify_qp for EFA - Crasher in qedr" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait RDMA/core: Fix empty gid table for non IB/RoCE devices RDMA/efa: Use the correct current and new states in modify QP RDMA/qedr: iWARP invalid(zero) doorbell address fix
2020-12-10ALSA: hda/hdmi: fix silent stream for first playback to DPKai Vehmanen
A problem exists in enabling silent stream when connection type is DisplayPort. Silent stream programming is completed when a new DP receiver is connected, but infoframe transmission does not actually start until PCM is opened for the first time. This can result in audible gap of multiple seconds. This only affects the first PCM open. Fix the issue by properly assigning a converter to the silent stream, and modifying the required stream ID programming sequence. This change only affects Intel display audio codecs. BugLink: https://github.com/thesofproject/linux/issues/2468 Fixes: 951894cf30f4 ("ALSA: hda/hdmi: Add Intel silent stream support") Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20201210174445.3134104-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-12-10ALSA: hda/ca0132 - Change Input Source enum strings.Connor McAdams
Change the Input Source enumerated control's strings to make it play nice with pulseaudio. Fixes: 7cb9d94c05de9 ("ALSA: hda/ca0132: add alt_select_in/out for R3Di + SBZ") Cc: <stable@kernel.org> Signed-off-by: Connor McAdams <conmanx360@gmail.com> Link: https://lore.kernel.org/r/20201208195223.424753-2-conmanx360@gmail.com Link: https://lore.kernel.org/r/20201210173550.2968-2-conmanx360@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-12-10ALSA: hda/ca0132 - Fix AE-5 rear headphone pincfg.Connor McAdams
The Windows driver sets the pincfg for the AE-5's rear-headphone to report as a microphone. This causes issues with Pulseaudio mistakenly believing there is no headphone plugged in. In Linux, we should instead set it to be a headphone. Fixes: a6b0961b39896 ("ALSA: hda/ca0132 - fix AE-5 pincfg") Cc: <stable@kernel.org> Signed-off-by: Connor McAdams <conmanx360@gmail.com> Link: https://lore.kernel.org/r/20201208195223.424753-1-conmanx360@gmail.com Link: https://lore.kernel.org/r/20201210173550.2968-1-conmanx360@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-12-10ALSA: usb-audio: Add implicit fb support for Steinberg UR22Takashi Iwai
Steinberg UR22 (with USB ID 0499:1509) requires the implicit feedback for the proper playback, otherwise it causes occasional cracks. This patch adds the corresponding the quirk table entry with the recently added generic implicit fb support. Reported-and-tested-by: Kilian <meschi@posteo.de> Link: https://lore.kernel.org/r/20201209161835.13625-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-12-10ALSA: hda: Fix regressions on clear and reconfig sysfsTakashi Iwai
It seems that the HD-audio clear and reconfig sysfs don't work any longer after the recent driver core change. There are multiple issues around that: the linked list corruption and the dead device handling. The former issue is fixed by another patch for the driver core itself, while the latter patch needs to be addressed in HD-audio side. This patch corresponds to the latter, it recovers those broken functions by replacing the device detach and attach actions with the standard core API functions, which are almost equivalent with unbind and bind actions. Fixes: 654888327e9f ("driver core: Avoid binding drivers to dead devices") Cc: <stable@vger.kernel.org> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209207 Link: https://lore.kernel.org/r/20201209150119.7705-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-12-10cw1200: txrx: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201209135550.2004-1-zhengyongjun3@huawei.com
2020-12-10Merge tag 'media/v5.10-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "A couple of fixes: - videobuf2: fix a DMABUF bug, preventing it to properly handle cache sync/flush - vidtv: an usage after free and a few sparse/smatch warning fixes - pulse8-cec: a duplicate free and a bug related to new firmware usage - mtk-cir: fix a regression on a clock setting" * tag 'media/v5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: vidtv: fix some warnings media: vidtv: fix kernel-doc markups media: [next] media: vidtv: fix a read from an object after it has been freed media: vb2: set cache sync hints when init buffers media: pulse8-cec: add support for FW v10 and up media: pulse8-cec: fix duplicate free at disconnect or probe error media: mtk-cir: fix calculation of chk period
2020-12-10wilc1000: changes for SPI communication stall issue found with IperfAjay Singh
Added retry mechanism to ensure VMM enable bit is set during the block transfer of data between host and WILC FW. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201208103739.28597-1-ajay.kathat@microchip.com
2020-12-10Merge tag 'iwlwifi-next-for-kalle-2020-12-09' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next iwlwifi patches intended for v5.11 * A few fixes and improvements in the FW debugging framework; * A fix in the HE capabilities settings; * Small fix in the logs for SAR; * Move queue code to a common place; * Support for 6GHz; * Improve validation of firmware notifications; * Debugging improvements and fixes; * Replace terminology with inclusive words determined by the guidelines; * Convert copyright notices to SPDX tags; * Added more validations for firmware notifications; * A couple of debugging/recovery fixes; * Added some more validations for firmware notifications; * Support for a new type of HW; * A couple of channel switch fixes; * Support new FW reset handshake; * Add a couple of RX handlers that were accidentally left out; * Some other clean-ups and small fixes; # gpg: Signature made Thu 10 Dec 2020 12:19:59 AM EET using RSA key ID 1A3CC5FA # gpg: Good signature from "Luciano Roth Coelho (Luca) <luca@coelho.fi>" # gpg: aka "Luciano Roth Coelho (Intel) <luciano.coelho@intel.com>"
2020-12-10PCI: Mark AMD Raven iGPU ATS as broken in some platformsAlex Deucher
Edgar reported [1] AMD Raven iGPU errors on several of his systems. There is no root cause. Turn off ATS on these systems to avoid the issue. [1] https://lore.kernel.org/linux-iommu/MWHPR10MB1310CDB6829DDCF5EA84A14689150@MWHPR10MB1310.namprd10.prod.outlook.com/ [bhelgaas: commit log] Link: https://lore.kernel.org/r/MWHPR10MB131082779A86BE4CCCF190B789CB0@MWHPR10MB1310.namprd10.prod.outlook.com Reported-by: Edgar Merger <Edgar.Merger@emerson.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-10thermal: broadcom: simplify the return expression of bcm2711_thermal_probe()Zheng Yongjun
Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201210135432.1249-1-zhengyongjun3@huawei.com
2020-12-10x86/resctrl: Fix incorrect local bandwidth when mba_sc is enabledXiaochen Shen
The MBA software controller (mba_sc) is a feedback loop which periodically reads MBM counters and tries to restrict the bandwidth below a user-specified value. It tags along the MBM counter overflow handler to do the updates with 1s interval in mbm_update() and update_mba_bw(). The purpose of mbm_update() is to periodically read the MBM counters to make sure that the hardware counter doesn't wrap around more than once between user samplings. mbm_update() calls __mon_event_count() for local bandwidth updating when mba_sc is not enabled, but calls mbm_bw_count() instead when mba_sc is enabled. __mon_event_count() will not be called for local bandwidth updating in MBM counter overflow handler, but it is still called when reading MBM local bandwidth counter file 'mbm_local_bytes', the call path is as below: rdtgroup_mondata_show() mon_event_read() mon_event_count() __mon_event_count() In __mon_event_count(), m->chunks is updated by delta chunks which is calculated from previous MSR value (m->prev_msr) and current MSR value. When mba_sc is enabled, m->chunks is also updated in mbm_update() by mistake by the delta chunks which is calculated from m->prev_bw_msr instead of m->prev_msr. But m->chunks is not used in update_mba_bw() in the mba_sc feedback loop. When reading MBM local bandwidth counter file, m->chunks was changed unexpectedly by mbm_bw_count(). As a result, the incorrect local bandwidth counter which calculated from incorrect m->chunks is shown to the user. Fix this by removing incorrect m->chunks updating in mbm_bw_count() in MBM counter overflow handler, and always calling __mon_event_count() in mbm_update() to make sure that the hardware local bandwidth counter doesn't wrap around. Test steps: # Run workload with aggressive memory bandwidth (e.g., 10 GB/s) git clone https://github.com/intel/intel-cmt-cat && cd intel-cmt-cat && make ./tools/membw/membw -c 0 -b 10000 --read # Enable MBA software controller mount -t resctrl resctrl -o mba_MBps /sys/fs/resctrl # Create control group c1 mkdir /sys/fs/resctrl/c1 # Set MB throttle to 6 GB/s echo "MB:0=6000;1=6000" > /sys/fs/resctrl/c1/schemata # Write PID of the workload to tasks file echo `pidof membw` > /sys/fs/resctrl/c1/tasks # Read local bytes counters twice with 1s interval, the calculated # local bandwidth is not as expected (approaching to 6 GB/s): local_1=`cat /sys/fs/resctrl/c1/mon_data/mon_L3_00/mbm_local_bytes` sleep 1 local_2=`cat /sys/fs/resctrl/c1/mon_data/mon_L3_00/mbm_local_bytes` echo "local b/w (bytes/s):" `expr $local_2 - $local_1` Before fix: local b/w (bytes/s): 11076796416 After fix: local b/w (bytes/s): 5465014272 Fixes: ba0f26d8529c (x86/intel_rdt/mba_sc: Prepare for feedback loop) Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/1607063279-19437-1-git-send-email-xiaochen.shen@intel.com
2020-12-10Merge tag 'kvmarm-fixes-5.10-5' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD kvm/arm64 fixes for 5.10, take #5 - Don't leak page tables on PTE update - Correctly invalidate TLBs on table to block transition - Only update permissions if the fault level matches the expected mapping size
2020-12-10selftests/bpf: Make selftest compilation work on clang 11Jiri Olsa
We can't compile test_core_reloc_module.c selftest with clang 11, compile fails with: CLNG-LLC [test_maps] test_core_reloc_module.o progs/test_core_reloc_module.c:57:21: error: use of unknown builtin \ '__builtin_preserve_type_info' [-Wimplicit-function-declaration] out->read_ctx_sz = bpf_core_type_size(struct bpf_testmod_test_read_ctx); Skipping these tests if __builtin_preserve_type_info() is not supported by compiler. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201209142912.99145-1-jolsa@kernel.org
2020-12-10selftests/bpf: Xsk selftests - adding xdpxceiver to .gitignoreWeqaar Janjua
This patch adds *xdpxceiver* to selftests/bpf/.gitignore Reported-by: Yonghong Song <yhs@fb.com> Suggested-by: Yonghong Song <yhs@fb.com> Signed-off-by: Weqaar Janjua <weqaar.a.janjua@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20201210115435.3995-1-weqaar.a.janjua@intel.com
2020-12-10selftests/bpf: Drop tcp-{client,server}.py from MakefileVeronika Kabatova
The files don't exist anymore so this breaks generic kselftest builds when using "make install" or "make gen_tar". Fixes: 247f0ec361b7 ("selftests/bpf: Drop python client/server in favor of threads") Signed-off-by: Veronika Kabatova <vkabatov@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20201210120134.2148482-1-vkabatov@redhat.com
2020-12-10misc: pvpanic: Replace OF headers by mod_devicetable.hAndy Shevchenko
There is no use for OF headers in the driver, but mod_devicetable.h must be included. Update driver accordingly. Cc: Peng Hao <peng.hao2@zte.com.cn> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20201209203642.27648-5-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-10misc: pvpanic: Combine ACPI and platform driversAndy Shevchenko
There is nothing special in the driver that requires to have a special ACPI driver for it. Combine both into simple platform driver. Cc: Peng Hao <peng.hao2@zte.com.cn> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20201209203642.27648-4-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-10usb: host: sl811: Switch to use platform_get_mem_or_io()Andy Shevchenko
Switch to use new platform_get_mem_or_io() instead of home grown analogue. Note, the code has been moved upper in the function to allow farther cleanups, such as resource sanity check. Cc: linux-usb@vger.kernel.org Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20201209203642.27648-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-19 10:20:01 +0000