| Age | Commit message (Collapse) | Author |
|---|
|
Don't prune the master node in the hsr_prune_nodes function.
Neither time_in[HSR_PT_SLAVE_A] nor time_in[HSR_PT_SLAVE_B]
will ever be updated by hsr_register_frame_in for the master port.
Thus, the master node will be repeatedly pruned leading to
repeated packet loss.
This bug never appeared because the hsr_prune_nodes function
was only called once. Since commit 5150b45fd355
("net: hsr: Fix node prune function for forget time expiry") this issue
is fixed unveiling the issue described above.
Fixes: 5150b45fd355 ("net: hsr: Fix node prune function for forget time expiry")
Signed-off-by: Andreas Oetken <andreas.oetken@siemens.com>
Tested-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull NVMe changes from Keith.
* 'nvme-5.2-rc2' of git://git.infradead.org/nvme:
nvme-pci: use blk-mq mapping for unmanaged irqs
nvme: update MAINTAINERS
nvme: copy MTFA field from identify controller
nvme: fix memory leak for power latency tolerance
nvme: release namespace SRCU protection before performing controller ioctls
nvme: merge nvme_ns_ioctl into nvme_ioctl
nvme: remove the ifdef around nvme_nvm_ioctl
nvme: fix srcu locking on error return in nvme_get_ns_from_disk
nvme: Fix known effects
nvme-pci: Sync queues on reset
nvme-pci: Unblock reset_work on IO failure
nvme-pci: Don't disable on timeout in reset state
nvme-pci: Fix controller freeze wait disabling
|
|
Various fixes and changes have been applied to liburing since we
copied some select bits to the kernel testing/examples part, sync
up with liburing to get those changes.
Most notable is the change that split the CQE reading into the peek
and seen event, instead of being just a single function. Also fixes
an unsigned wrap issue in io_uring_submit(), leak of 'fd' in setup
if we fail, and various other little issues.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently fails with:
io_uring-bench.o: In function `main':
/home/axboe/git/linux-block/tools/io_uring/io_uring-bench.c:560: undefined reference to `pthread_create'
/home/axboe/git/linux-block/tools/io_uring/io_uring-bench.c:588: undefined reference to `pthread_join'
collect2: error: ld returned 1 exit status
Makefile:11: recipe for target 'io_uring-bench' failed
make: *** [io_uring-bench] Error 1
Move -lpthread to the end.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The following is a description of a hang in blk_mq_freeze_queue_wait().
The hang happens on attempt to freeze a queue while another task does
queue unfreeze.
The root cause is an incorrect sequence of percpu_ref_resurrect() and
percpu_ref_kill() and as a result those two can be swapped:
CPU#0 CPU#1
---------------- -----------------
q1 = blk_mq_init_queue(shared_tags)
q2 = blk_mq_init_queue(shared_tags):
blk_mq_add_queue_tag_set(shared_tags):
blk_mq_update_tag_set_depth(shared_tags):
list_for_each_entry()
blk_mq_freeze_queue(q1)
> percpu_ref_kill()
> blk_mq_freeze_queue_wait()
blk_cleanup_queue(q1)
blk_mq_freeze_queue(q1)
> percpu_ref_kill()
^^^^^^ freeze_depth can't guarantee the order
blk_mq_unfreeze_queue()
> percpu_ref_resurrect()
> blk_mq_freeze_queue_wait()
^^^^^^ Hang here!!!!
This wrong sequence raises kernel warning:
percpu_ref_kill_and_confirm called more than once on blk_queue_usage_counter_release!
WARNING: CPU: 0 PID: 11854 at lib/percpu-refcount.c:336 percpu_ref_kill_and_confirm+0x99/0xb0
But the most unpleasant effect is a hang of a blk_mq_freeze_queue_wait(),
which waits for a zero of a q_usage_counter, which never happens
because percpu-ref was reinited (instead of being killed) and stays in
PERCPU state forever.
How to reproduce:
- "insmod null_blk.ko shared_tags=1 nr_devices=0 queue_mode=2"
- cpu0: python Script.py 0; taskset the corresponding process running on cpu0
- cpu1: python Script.py 1; taskset the corresponding process running on cpu1
Script.py:
------
#!/usr/bin/python3
import os
import sys
while True:
on = "echo 1 > /sys/kernel/config/nullb/%s/power" % sys.argv[1]
off = "echo 0 > /sys/kernel/config/nullb/%s/power" % sys.argv[1]
os.system(on)
os.system(off)
------
This bug was first reported and fixed by Roman, previous discussion:
[1] Message id: 1443287365-4244-7-git-send-email-akinobu.mita@gmail.com
[2] Message id: 1443563240-29306-6-git-send-email-tj@kernel.org
[3] https://patchwork.kernel.org/patch/9268199/
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
At this point these fields aren't used for anything, so we can remove
them.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We fundamentally do not have a maximum segement size for devices with a
virt boundary. So don't bother checking it, especially given that the
existing checks didn't properly work to start with as we never fully
update the front/back segment size and miss the bi_seg_front_size that
wuld have been required for some cases.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We currently fail to update the front/back segment size in the bio when
deciding to allow an otherwise gappy segement to a device with a
virt boundary. The reason why this did not cause problems is that
devices with a virt boundary fundamentally don't use segments as we
know it and thus don't care. Make that assumption formal by forcing
an unlimited segement size in this case.
Fixes: f6970f83ef79 ("block: don't check if adjacent bvecs in one bio can be mergeable")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently ll_merge_requests_fn, unlike all other merge functions,
reduces nr_phys_segments by one if the last segment of the previous,
and the first segment of the next segement are contigous. While this
seems like a nice solution to avoid building smaller than possible
requests it causes a mismatch between the segments actually present
in the request and those iterated over by the bvec iterators, including
__rq_for_each_bio. This can for example mistrigger the single segment
optimization in the nvme-pci driver, and might lead to mismatching
nr_phys_segments number when recalculating the number of request
when inserting a cloned request.
We could possibly work around this by making the bvec iterators take
the front and back segment size into account, but that would require
moving them from the bio to the bio_iter and spreading this mess
over all users of bvecs. Or we could simply remove this optimization
under the assumption that most users already build good enough bvecs,
and that the bio merge patch never cared about this optimization
either. The latter is what this patch does.
dff824b2aadb ("nvme-pci: optimize mapping of small single segment requests").
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This barrier only applies to the read-modify-write operations; in
particular, it does not apply to the atomic_set() primitive.
Replace the barrier with an smp_mb().
Fixes: 6c0ca7ae292ad ("sbitmap: fix wakeup hang after sbq resize")
Cc: stable@vger.kernel.org
Reported-by: "Paul E. McKenney" <paulmck@linux.ibm.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: linux-block@vger.kernel.org
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This barrier only applies to the read-modify-write operations; in
particular, it does not apply to the atomic_set() primitive.
Replace the barrier with an smp_mb().
Fixes: dac56212e8127 ("bio: skip atomic inc/dec of ->bi_cnt for most use cases")
Cc: stable@vger.kernel.org
Reported-by: "Paul E. McKenney" <paulmck@linux.ibm.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: linux-block@vger.kernel.org
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Justin Sanders, who has extensive experience with ATA over Ethernet
in general and AoE SCSI and block-device drivers in particular, is
ready to take on the role of aoe maintainer. The driver needs a more
active maintainer.
Signed-off-by: Ed Cashin <ed.cashin@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All LXT PHYs implement the standard "power down" bit 11 of
BMCR, so this patch adds support using the generic
genphy_{suspend,resume} functions added by
commit 0f0ca340e57b ("phy: power management support").
LXT970 is left aside because all registers get cleared upon
"power down" exit.
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Prevent misbehavior of drivers who would not set port type for longer
period of time. Drivers should always set port type. Do WARN if that
happens.
Note that it is perfectly fine to temporarily not have the type set,
during initialization and port type change.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The flow_rule is only used when configuring the classification tables,
and should be free'd once we're done using it. The current code only
frees it in the error path.
Fixes: 90b509b39ac9 ("net: mvpp2: cls: Add Classification offload support")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The conversion of acpi/enumeration.txt to RST included one markup error,
leading to many warnings like:
.../firmware-guide/acpi/enumeration.rst:430: WARNING: Unexpected indentation.
Add the missing colon and create some peace.
Fixes: c24bc66e8157 ("Documentation: ACPI: move enumeration.txt to firmware-guide/acpi and convert to reST")
Cc: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Commit 043b3f7b6388 ("lib/list_sort: simplify and remove
MAX_LIST_LENGTH_BITS") added some useful kerneldoc info, but also broke the
docs build:
./lib/list_sort.c:128: WARNING: Definition list ends without a blank line; unexpected unindent.
./lib/list_sort.c:161: WARNING: Unexpected indentation.
./lib/list_sort.c:162: WARNING: Block quote ends without a blank line; unexpected unindent.
Fix the offending literal block and make the error go away.
Fixes: 043b3f7b6388 ("lib/list_sort: simplify and remove MAX_LIST_LENGTH_BITS")
Cc: George Spelvin <lkml@sdf.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Commit 13bac55ef7ae ("doc/mm: New documentation for memory performance")
added numaperf.rst, but did not add it to the TOC tree. There was also an
incorrectly marked literal block leading to this warning sequence:
numaperf.rst:24: WARNING: Unexpected indentation.
numaperf.rst:24: WARNING: Inline substitution_reference start-string without end-string.
numaperf.rst:25: WARNING: Block quote ends without a blank line; unexpected unindent.
Fix the block and add the file to the document tree.
Fixes: 13bac55ef7ae ("doc/mm: New documentation for memory performance")
Cc: Keith Busch <keith.busch@intel.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
AutoReporter is going away; recent versions of sphinx emit a warning like:
Documentation/sphinx/kerneldoc.py:125:
RemovedInSphinx20Warning: AutodocReporter is now deprecated.
Use sphinx.util.docutils.switch_source_input() instead.
Make the switch. But switch_source_input() only showed up in 1.7, so we
have to do ugly version checks to keep things working in older versions.
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Recent versions of sphinx will emit messages like:
Documentation/sphinx/kerneldoc.py:103:
RemovedInSphinx20Warning: app.warning() is now deprecated.
Use sphinx.util.logging instead.
Switch to sphinx.util.logging to make this unsightly message go away.
Alas, that interface was only added in version 1.6, so we have to add a
version check to keep things working with older sphinxes.
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Pull documentation fixes from Jonathan Corbet:
"A handful of fixes for a docs build problem, along with catching the
spdxcheck.py script up with the current state of affairs"
* tag 'docs-5.2-fixes' of git://git.lwn.net/linux:
Documentation: kdump: fix minor typo
scripts/spdxcheck.py: Add dual license subdirectory
scripts/spdxcheck.py: Fix path to deprecated licenses
counter: fix Documentation build error due to incorrect source file name
|
|
We already mitigate erratum 1188873 affecting Cortex-A76 and
Neoverse-N1 r0p0 to r2p0. It turns out that revisions r0p0 to
r3p1 of the same cores are affected by erratum 1418040, which
has the same workaround as 1188873.
Let's expand the range of affected revisions to match 1418040,
and repaint all occurences of 1188873 to 1418040. Whilst we're
there, do a bit of reformating in silicon-errata.txt and drop
a now unnecessary dependency on ARM_ARCH_TIMER_OOL_WORKAROUND.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The R_AARCH64_PREL16 and R_AARCH64_PREL32 relocations are
documented as permitting a range of [-2^15 .. 2^16), resp.
[-2^31 .. 2^32). It is also documented that this means we
cannot detect overflow in some cases, which is bad.
Since we always interpret the targets of these relocations as
signed quantities (e.g., in the ksymtab handling code), let's
tighten the overflow checks so that targets that are out of
range for our signed interpretation of the relocated quantity
get flagged.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
If IOMMU_SUPPORT is not enabled (and therefore IOMMU_API is not
selected), struct iommu_fwspec is an empty struct and
IOMMU_FWSPEC_PCI_RC_ATS is not defined, resulting in the following
compilation errors:
drivers/acpi/arm64/iort.c: In function iort_iommu_configure:
drivers/acpi/arm64/iort.c:1079:21: error: struct iommu_fwspec has no member named flag:
dev->iommu_fwspec->flags |= IOMMU_FWSPEC_PCI_RC_ATS;
^~
drivers/acpi/arm64/iort.c:1079:32: error: IOMMU_FWSPEC_PCI_RC_ATS
undeclared (first use in this function)
dev->iommu_fwspec->flags |= IOMMU_FWSPEC_PCI_RC_ATS;
^~~~~~~~~~~~~~~~~~~~~~~
drivers/acpi/arm64/iort.c:1079:32: note: each undeclared identifier is reported only once for each function it appears in
Move iort_iommu_configure() (and the helpers functions it relies on)
into CONFIG_IOMMU_API preprocessor guarded code so that when
CONFIG_IOMMU_SUPPORT is not enabled we prevent compiling code that is
basically equivalent to no-OP, fixing the build errors.
Cc: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/linux-arm-kernel/20190515034253.79348-1-wangkefeng.wang@huawei.com/
Fixes: 5702ee24182f ("ACPI/IORT: Check ATS capability in root complex nodes")
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The following commit
7290d5809571 ("module: use relative references for __ksymtab entries")
updated the ksymtab handling of some KASLR capable architectures
so that ksymtab entries are emitted as pairs of 32-bit relative
references. This reduces the size of the entries, but more
importantly, it gets rid of statically assigned absolute
addresses, which require fixing up at boot time if the kernel
is self relocating (which takes a 24 byte RELA entry for each
member of the ksymtab struct).
Since ksymtab entries are always part of the same module as the
symbol they export, it was assumed at the time that a 32-bit
relative reference is always sufficient to capture the offset
between a ksymtab entry and its target symbol.
Unfortunately, this is not always true: in the case of per-CPU
variables, a per-CPU variable's base address (which usually differs
from the actual address of any of its per-CPU copies) is allocated
in the vicinity of the ..data.percpu section in the core kernel
(i.e., in the per-CPU reserved region which follows the section
containing the core kernel's statically allocated per-CPU variables).
Since we randomize the module space over a 4 GB window covering
the core kernel (based on the -/+ 4 GB range of an ADRP/ADD pair),
we may end up putting the core kernel out of the -/+ 2 GB range of
32-bit relative references of module ksymtab entries that refer to
per-CPU variables.
So reduce the module randomization range a bit further. We lose
1 bit of randomization this way, but this is something we can
tolerate.
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Revisions of the Cortex-A76 CPU prior to r4p0 are affected by an erratum
that can prevent interrupts from being taken when single-stepping.
This patch implements a software workaround to prevent userspace from
effectively being able to disable interrupts.
Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
During an oops, we print the name of the current task and its pid twice.
We also helpfully advertise its stack limit as "0x(____ptrval____)".
Drop these useless messages.
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
I measured power consumption between power_save_node=1 and power_save_node=0.
It's almost the same.
Codec will enter to runtime suspend and suspend.
That pin also will enter to D3. Don't need to enter to D3 by single pin.
So, Disable power_save_node as default. It will avoid more issues.
Windows Driver also has not this option at runtime PM.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
ip_sf_list_clear_all() needs to be defined even if !CONFIG_IP_MULTICAST
Fixes: 3580d04aa674 ("ipv4/igmp: fix another memory leak in igmpv3_del_delrec()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
into drm-fixes
Fixes for 5.2:
- Fix for DMCU firmware issues for stable
- Add missing polaris10 pci id to kfd
- Screen corruption fix on picasso
- Fix for driver reload on vega10
- SR-IOV fixes
- Locking fix in new SMU code
- Compute profile switching fix for KFD
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522205425.3657-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
- sun4i fixes to hdmi phy as well as u16 overflow in dsi (left from -next-fixes)
- gma500 fix to make lvds detection more reliable
- select devfreq for panfrost since it can't probe without it
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522194440.GA22359@art_vandelay
|
|
git://people.freedesktop.org/~thomash/linux into drm-fixes
A set of misc fixes for various issues that have surfaced recently.
All Cc'd stable except the dma iterator fix which shouldn't really cause
any real issues on older kernels.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Thomas Hellstrom (VMware)" <thomas@shipmail.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522115408.33185-1-thomas@shipmail.org
|
|
syzbot reported memory leaks [1] that I have back tracked to
a missing cleanup from igmpv3_del_delrec() when
(im->sfmode != MCAST_INCLUDE)
Add ip_sf_list_clear_all() and kfree_pmc() helpers to explicitely
handle the cleanups before freeing.
[1]
BUG: memory leak
unreferenced object 0xffff888123e32b00 (size 64):
comm "softirq", pid 0, jiffies 4294942968 (age 8.010s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 e0 00 00 01 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000006105011b>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline]
[<000000006105011b>] slab_post_alloc_hook mm/slab.h:439 [inline]
[<000000006105011b>] slab_alloc mm/slab.c:3326 [inline]
[<000000006105011b>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
[<000000004bba8073>] kmalloc include/linux/slab.h:547 [inline]
[<000000004bba8073>] kzalloc include/linux/slab.h:742 [inline]
[<000000004bba8073>] ip_mc_add1_src net/ipv4/igmp.c:1961 [inline]
[<000000004bba8073>] ip_mc_add_src+0x36b/0x400 net/ipv4/igmp.c:2085
[<00000000a46a65a0>] ip_mc_msfilter+0x22d/0x310 net/ipv4/igmp.c:2475
[<000000005956ca89>] do_ip_setsockopt.isra.0+0x1795/0x1930 net/ipv4/ip_sockglue.c:957
[<00000000848e2d2f>] ip_setsockopt+0x3b/0xb0 net/ipv4/ip_sockglue.c:1246
[<00000000b9db185c>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616
[<000000003028e438>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3130
[<0000000015b65589>] __sys_setsockopt+0x98/0x120 net/socket.c:2078
[<00000000ac198ef0>] __do_sys_setsockopt net/socket.c:2089 [inline]
[<00000000ac198ef0>] __se_sys_setsockopt net/socket.c:2086 [inline]
[<00000000ac198ef0>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086
[<000000000a770437>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301
[<00000000d3adb93b>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 9c8bb163ae78 ("igmp, mld: Fix memory leak in igmpv3/mld_del_delrec()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Michael Chan says:
===================
bnxt_en: Bug fixes.
There are 4 driver fixes in this series:
1. Fix RX buffer leak during OOM condition.
2. Call pci_disable_msix() under correct conditions to prevent hitting BUG.
3. Reduce unneeded mmeory allocation in kdump kernel to prevent OOM.
4. Don't read device serial number on VFs because it is not supported.
Please queue #1, #2, #3 for -stable as well. Thanks.
===================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Don't read DSN on VFs that do not have the PCI capability.
Fixes: 03213a996531 ("bnxt: move bp->switch_id initialization to PF probe")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Skip RDMA context memory allocations, reduce to 1 ring, and disable
TPA when running in the kdump kernel. Without this patch, the driver
fails to initialize with memory allocation errors when running in a
typical kdump kernel.
Fixes: cf6daed098d1 ("bnxt_en: Increase context memory allocations on 57500 chips for RDMA.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When making configuration changes, the driver calls bnxt_close_nic()
and then bnxt_open_nic() for the changes to take effect. A parameter
irq_re_init is passed to the call sequence to indicate if IRQ
should be re-initialized. This irq_re_init parameter needs to
be included in the bnxt_reserve_rings() call. bnxt_reserve_rings()
can only call pci_disable_msix() if the irq_re_init parameter is
true, otherwise it may hit BUG() because some IRQs may not have been
freed yet.
Fixes: 41e8d7983752 ("bnxt_en: Modify the ring reservation functions for 57500 series chips.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For every RX packet, the driver replenishes all buffers used for that
packet and puts them back into the RX ring and RX aggregation ring.
In one code path where the RX packet has one RX buffer and one or more
aggregation buffers, we missed recycling the aggregation buffer(s) if
we are unable to allocate a new SKB buffer. This leads to the
aggregation ring slowly running out of buffers over time. Fix it
by properly recycling the aggregation buffers.
Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Reported-by: Rakesh Hemnani <rhemnani@fb.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the hv_sock send() iterates once over the buffer, puts data into
the VMBUS channel and returns. It doesn't maximize on the case when there
is a simultaneous reader draining data from the channel. In such a case,
the send() can maximize the bandwidth (and consequently minimize the cpu
cycles) by iterating until the channel is found to be full.
Perf data:
Total Data Transfer: 10GB/iteration
Single threaded reader/writer, Linux hvsocket writer with Windows hvsocket
reader
Packet size: 64KB
CPU sys time was captured using the 'time' command for the writer to send
10GB of data.
'Send Buffer Loop' is with the patch applied.
The values below are over 10 iterations.
|--------------------------------------------------------|
| | Current | Send Buffer Loop |
|--------------------------------------------------------|
| | Throughput | CPU sys | Throughput | CPU sys |
| | (MB/s) | time (s) | (MB/s) | time (s) |
|--------------------------------------------------------|
| Min | 407 | 7.048 | 401 | 5.958 |
|--------------------------------------------------------|
| Max | 455 | 7.563 | 542 | 6.993 |
|--------------------------------------------------------|
| Avg | 440 | 7.411 | 451 | 6.639 |
|--------------------------------------------------------|
| Median | 446 | 7.417 | 447 | 6.761 |
|--------------------------------------------------------|
Observation:
1. The avg throughput doesn't really change much with this change for this
scenario. This is most probably because the bottleneck on throughput is
somewhere else.
2. The average system (or kernel) cpu time goes down by 10%+ with this
change, for the same amount of data transfer.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
socket buffers
Currently, the hv_sock buffer size is static and can't scale to the
bandwidth requirements of the application. This change allows the
applications to influence the socket buffer sizes using the SO_SNDBUF and
the SO_RCVBUF socket options.
Few interesting points to note:
1. Since the VMBUS does not allow a resize operation of the ring size, the
socket buffer size option should be set prior to establishing the
connection for it to take effect.
2. Setting the socket option comes with the cost of that much memory being
reserved/allocated by the kernel, for the lifetime of the connection.
Perf data:
Total Data Transfer: 1GB
Single threaded reader/writer
Results below are summarized over 10 iterations.
Linux hvsocket writer + Windows hvsocket reader:
|---------------------------------------------------------------------------------------------|
|Packet size -> | 128B | 1KB | 4KB | 64KB |
|---------------------------------------------------------------------------------------------|
|SO_SNDBUF size | | Throughput in MB/s (min/max/avg/median): |
| v | |
|---------------------------------------------------------------------------------------------|
| Default | 109/118/114/116 | 636/774/701/700 | 435/507/480/476 | 410/491/462/470 |
| 16KB | 110/116/112/111 | 575/705/662/671 | 749/900/854/869 | 592/824/692/676 |
| 32KB | 108/120/115/115 | 703/823/767/772 | 718/878/850/866 | 1593/2124/2000/2085 |
| 64KB | 108/119/114/114 | 592/732/683/688 | 805/934/903/911 | 1784/1943/1862/1843 |
|---------------------------------------------------------------------------------------------|
Windows hvsocket writer + Linux hvsocket reader:
|---------------------------------------------------------------------------------------------|
|Packet size -> | 128B | 1KB | 4KB | 64KB |
|---------------------------------------------------------------------------------------------|
|SO_RCVBUF size | | Throughput in MB/s (min/max/avg/median): |
| v | |
|---------------------------------------------------------------------------------------------|
| Default | 69/82/75/73 | 313/343/333/336 | 418/477/446/445 | 659/701/676/678 |
| 16KB | 69/83/76/77 | 350/401/375/382 | 506/548/517/516 | 602/624/615/615 |
| 32KB | 62/83/73/73 | 471/529/496/494 | 830/1046/935/939 | 944/1180/1070/1100 |
| 64KB | 64/70/68/69 | 467/533/501/497 | 1260/1590/1430/1431 | 1605/1819/1670/1660 |
|---------------------------------------------------------------------------------------------|
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IPv6 redirect is broken for VRF. __ip6_route_redirect walks the FIB
entries looking for an exact match on ifindex. With VRF the flowi6_oif
is updated by l3mdev_update_flow to the l3mdev index and the
FLOWI_FLAG_SKIP_NH_OIF set in the flags to tell the lookup to skip the
device match. For redirects the device match is requires so use that
flag to know when the oif needs to be reset to the skb device index.
Fixes: ca254490c8df ("net: Add VRF support to IPv6 stack")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Removing two 4 bytes holes allows to use kmalloc-32
kmem cache instead of kmalloc-64 on 64bit kernels.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add tracepoint to __neigh_create to enable debugging of new entries.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The point of the pause-on-fail argument is to leave the setup as is after
a test fails to allow a user to debug why it failed. Move the cleanup
after posting the result to the user to make it so.
Random names for the namespaces are not user friendly when trying to
debug a failure. Make them simpler and more direct for the tests. Run
cleanup at the beginning to ensure they are cleaned up if they already
exist.
Remove cleanup_done. There is no harm in doing cleanup twice; just
ignore any errors related to not existing - which is already done.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add VERBOSE argument to fib-onlink-tests.sh and make output quiet by
default. Add getopt parsing of inputs and support for -v (verbose) and
-p (pause on fail).
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
New userspace on an older kernel can send unknown and unsupported
attributes resulting in an incompelete config which is almost
always wrong for routing (few exceptions are passthrough settings
like the protocol that installed the route).
Set strict_start_type in the policies for IPv4 and IPv6 routes and
rules to detect new, unsupported attributes and fail the route add.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
David Ahern says:
====================
net: Export functions for nexthop code
This set exports ipv4 and ipv6 fib functions for use by the nexthop
code. It also adds new ones to send route notifications if a nexthop
configuration changes.
v2
- repost of patches dropped at the end of the last dev window
added patch 8 which exports nh_update_mtu since it is inline with
the other patches
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rename nh_update_mtu to fib_nhc_update_mtu and export for use by the
nexthop code.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add scope as input argument versus relying on fib_info reference in
fib_nh, and export fib_info_update_nh_saddr.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As nexthops are deleted, fib entries referencing it are marked dead.
Export fib_flush so those entries can be removed in a timely manner.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
