summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-05-15openvswitch: Use nested-BH locking for ovs_pcpu_storageSebastian Andrzej Siewior
ovs_pcpu_storage is a per-CPU variable and relies on disabled BH for its locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT this data structure requires explicit locking. The data structure can be referenced recursive and there is a recursion counter to avoid too many recursions. Add a local_lock_t to the data structure and use local_lock_nested_bh() for locking. Add an owner of the struct which is the current task and acquire the lock only if the structure is not owned by the current task. Cc: Aaron Conole <aconole@redhat.com> Cc: Eelco Chaudron <echaudro@redhat.com> Cc: Ilya Maximets <i.maximets@ovn.org> Cc: dev@openvswitch.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Aaron Conole <aconole@redhat.com> Link: https://patch.msgid.link/20250512092736.229935-9-bigeasy@linutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15openvswitch: Merge three per-CPU structures into oneSebastian Andrzej Siewior
exec_actions_level is a per-CPU integer allocated at compile time. action_fifos and flow_keys are per-CPU pointer and have their data allocated at module init time. There is no gain in splitting it, once the module is allocated, the structures are allocated. Merge the three per-CPU variables into ovs_pcpu_storage, adapt callers. Cc: Aaron Conole <aconole@redhat.com> Cc: Eelco Chaudron <echaudro@redhat.com> Cc: Ilya Maximets <i.maximets@ovn.org> Cc: dev@openvswitch.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Aaron Conole <aconole@redhat.com> Link: https://patch.msgid.link/20250512092736.229935-8-bigeasy@linutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15xfrm: Use nested-BH locking for nat_keepalive_sk_ipv[46]Sebastian Andrzej Siewior
nat_keepalive_sk_ipv[46] is a per-CPU variable and relies on disabled BH for its locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT this data structure requires explicit locking. Use sock_bh_locked which has a sock pointer and a local_lock_t. Use local_lock_nested_bh() for locking. This change adds only lockdep coverage and does not alter the functional behaviour for !PREEMPT_RT. Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://patch.msgid.link/20250512092736.229935-7-bigeasy@linutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15xdp: Use nested-BH locking for system_page_poolSebastian Andrzej Siewior
system_page_pool is a per-CPU variable and relies on disabled BH for its locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT this data structure requires explicit locking. Make a struct with a page_pool member (original system_page_pool) and a local_lock_t and use local_lock_nested_bh() for locking. This change adds only lockdep coverage and does not alter the functional behaviour for !PREEMPT_RT. Cc: Andrew Lunn <andrew+netdev@lunn.ch> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jesper Dangaard Brouer <hawk@kernel.org> Cc: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://patch.msgid.link/20250512092736.229935-6-bigeasy@linutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15ipv6: sr: Use nested-BH locking for hmac_storageSebastian Andrzej Siewior
hmac_storage is a per-CPU variable and relies on disabled BH for its locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT this data structure requires explicit locking. Add a local_lock_t to the data structure and use local_lock_nested_bh() for locking. This change adds only lockdep coverage and does not alter the functional behaviour for !PREEMPT_RT. Cc: David Ahern <dsahern@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://patch.msgid.link/20250512092736.229935-5-bigeasy@linutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15ipv4/route: Use this_cpu_inc() for stats on PREEMPT_RTSebastian Andrzej Siewior
The statistics are incremented with raw_cpu_inc() assuming it always happens with bottom half disabled. Without per-CPU locking in local_bh_disable() on PREEMPT_RT this is no longer true. Use this_cpu_inc() on PREEMPT_RT for the increment to not worry about preemption. Cc: David Ahern <dsahern@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://patch.msgid.link/20250512092736.229935-4-bigeasy@linutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15net: dst_cache: Use nested-BH locking for dst_cache::cacheSebastian Andrzej Siewior
dst_cache::cache is a per-CPU variable and relies on disabled BH for its locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT this data structure requires explicit locking. Add a local_lock_t to the data structure and use local_lock_nested_bh() for locking. This change adds only lockdep coverage and does not alter the functional behaviour for !PREEMPT_RT. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://patch.msgid.link/20250512092736.229935-3-bigeasy@linutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15net: page_pool: Don't recycle into cache on PREEMPT_RTSebastian Andrzej Siewior
With preemptible softirq and no per-CPU locking in local_bh_disable() on PREEMPT_RT the consumer can be preempted while a skb is returned. Avoid the race by disabling the recycle into the cache on PREEMPT_RT. Cc: Jesper Dangaard Brouer <hawk@kernel.org> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://patch.msgid.link/20250512092736.229935-2-bigeasy@linutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15Merge tag 'nvme-6.15-2025-05-15' of git://git.infradead.org/nvme into block-6.15Jens Axboe
Pull NVMe fixes from Christoph: "nvme fixes for linux 6.15 - fixes for atomic writes (Alan Adamson) - fixes for polled CQs in nvmet-epf (Damien Le Moal) - fix for polled CQs in nvme-pci (Keith Busch) - fix compile on odd configs that need to be forced to inline (Kees Cook) - one more quirk (Ilya Guterman)" * tag 'nvme-6.15-2025-05-15' of git://git.infradead.org/nvme: nvme-pci: add NVME_QUIRK_NO_DEEPEST_PS quirk for SOLIDIGM P44 Pro nvme: all namespaces in a subsystem must adhere to a common atomic write size nvme: multipath: enable BLK_FEAT_ATOMIC_WRITES for multipathing nvmet: pci-epf: remove NVMET_PCI_EPF_Q_IS_SQ nvmet: pci-epf: improve debug message nvmet: pci-epf: cleanup nvmet_pci_epf_raise_irq() nvmet: pci-epf: do not fall back to using INTX if not supported nvmet: pci-epf: clear completion queue IRQ flag on delete nvme-pci: acquire cq_poll_lock in nvme_poll_irqdisable nvme-pci: make nvme_pci_npages_prp() __always_inline
2025-05-15Merge tag 'iwlwifi-next-2025-05-15' of ↵Johannes Berg
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Miri Korenblit says: ==================== iwlwifi features, notably a rework of the transport configuration ==================== Link: https://patch.msgid.link/MW5PR11MB5810DD2655DE461E98A618DDA390A@MW5PR11MB5810.namprd11.prod.outlook.com/ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-05-15Merge tag 'mt76-fixes-2025-05-15' of https://github.com/nbd168/wirelessJohannes Berg
Felix Fietkau says: =================== mt76 fix for 6.15 - disable napi on driver removal to fix warning - fix multicast rx regression on mt7925 =================== Link: https://patch.msgid.link/3b526d06-b717-4d47-817c-a9f47b796a31@nbd.name/ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-05-15Merge branch 'octeontx2-improve-mailbox-tracing'Paolo Abeni
Subbaraya Sundeep says: ==================== octeontx2: Improve mailbox tracing Octeontx2 VF,PF and AF devices communicate using hardware shared mailbox region where VFs can only to talk to its PFs and PFs can only talk to AF. AF does the entire resource management for all PFs and VFs. The shared mbox region is used for synchronous requests (requests from PF to AF or VF to PF) and async notifications (notifications from AF to PFs or PF to VFs). Sending a request to AF from VF involves various stages like 1. VF allocates message in shared region 2. Triggers interrupt to PF 3. PF upon receiving interrupt from VF will copy the message from VF<->PF region to PF<->AF region 4. Triggers interrupt to AF 5. AF processes it and writes response in PF<->AF region 6. Triggers interrupt to PF 7. PF copies responses from PF<->AF region to VF<->PF region 8. Triggers interrupt to Vf 9. VF reads response in VF<->PF region Due to various stages involved, Tracepoints are used in mailbox code for debugging. Existing tracepoints need some improvements so that maximum information can be inferred from trace logs during an issue. This patchset tries to enhance existing tracepoints and also adds a couple of tracepoints. ==================== Link: https://patch.msgid.link/1747136408-30685-1-git-send-email-sbhatta@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15octeontx2: Add new tracepoint otx2_msg_statusSubbaraya Sundeep
Apart from netdev interface Octeontx2 PF does the following: 1. Sends its own requests to AF and receives responses from AF. 2. Receives async messages from AF. 3. Forwards VF requests to AF, sends respective responses from AF to VFs. 4. Sends async messages to VFs. This patch adds new tracepoint otx2_msg_status to display the status of PF wrt mailbox handling. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://patch.msgid.link/1747136408-30685-5-git-send-email-sbhatta@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15octeontx2: Add pcifunc also to mailbox tracepointsSubbaraya Sundeep
This patch adds pcifunc which represents PF and VF device to the tracepoints otx2_msg_alloc, otx2_msg_send, otx2_msg_process so that it is easier to correlate which device allocated the message, which device forwarded it and which device processed that message. Also add message id in otx2_msg_send tracepoint to check which message is sent at any point of time from a device. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://patch.msgid.link/1747136408-30685-4-git-send-email-sbhatta@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15octeontx2-af: Display names for CPT and UP messagesSubbaraya Sundeep
Mailbox UP messages and CPT messages names are not being displayed with their names in trace log files. Add those messages too in otx2_mbox_id2name. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://patch.msgid.link/1747136408-30685-3-git-send-email-sbhatta@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15octeontx2-af: convert dev_dbg to tracepoint in mboxSubbaraya Sundeep
Use tracepoint instead of dev_dbg since the entire mailbox code uses tracepoints for debugging. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://patch.msgid.link/1747136408-30685-2-git-send-email-sbhatta@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_requestKees Cook
Make sure that n_channels is set after allocating the struct cfg80211_registered_device::int_scan_req member. Seen with syzkaller: UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:1208:5 index 0 is out of range for type 'struct ieee80211_channel *[] __counted_by(n_channels)' (aka 'struct ieee80211_channel *[]') This was missed in the initial conversions because I failed to locate the allocation likely due to the "sizeof(void *)" not matching the "channels" array type. Reported-by: syzbot+4bcdddd48bb6f0be0da1@syzkaller.appspotmail.com Closes: https://lore.kernel.org/lkml/680fd171.050a0220.2b69d1.045e.GAE@google.com/ Fixes: e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by") Signed-off-by: Kees Cook <kees@kernel.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://patch.msgid.link/20250509184641.work.542-kees@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-05-15net: Look for bonding slaves in the bond's network namespaceShay Drory
Update the for_each_netdev_in_bond_rcu macro to iterate through network devices in the bond's network namespace instead of always using init_net. This change is safe because: 1. **Bond-Slave Namespace Relationship**: A bond device and its slaves must reside in the same network namespace. The bond device's namespace is established at creation time and cannot change. 2. **Slave Movement Implications**: Any attempt to move a slave device to a different namespace automatically removes it from the bond, as per kernel networking stack rules. This maintains the invariant that slaves must exist in the same namespace as their bond. This change is part of an effort to enable Link Aggregation (LAG) to work properly inside custom network namespaces. Previously, the macro would only find slave devices in the initial network namespace, preventing proper bonding functionality in custom namespaces. Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250513081922.525716-1-mbloch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15ovpn: fix check for skb_to_sgvec_nomark() return valueAntonio Quartulli
Depending on the data offset, skb_to_sgvec_nomark() may use less scatterlist elements than what was forecasted by the previous call to skb_cow_data(). It specifically happens when 'skbheadlen(skb) < offset', because in this case we entirely skip the skb's head, which would have required its own scatterlist element. For this reason, it doesn't make sense to check that skb_to_sgvec_nomark() returns the same value as skb_cow_data(), but we can rather check for errors only, as it happens in other parts of the kernel. Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
2025-05-15ovpn: improve 'no route to host' debug messageAntonio Quartulli
When debugging a 'no route to host' error it can be beneficial to know the address of the unreachable destination. Print it along the debugging text. While at it, add a missing parenthesis in a different debugging message inside ovpn_peer_endpoints_update(). Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
2025-05-15ovpn: drop useless reg_state check in keepalive workerAntonio Quartulli
The keepalive worker is cancelled before calling unregister_netdevice_queue(), therefore it will never hit a situation where the reg_state can be different than NETDEV_REGISTERED. For this reason, checking reg_state is useless and the condition can be removed. Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
2025-05-15selftest/net/ovpn: extend coverage with more test casesAntonio Quartulli
To increase code coverage, extend the ovpn selftests with the following cases: * connect UDP peers using a mix of IPv6 and IPv4 at the transport layer * run full test with tunnel MTU equal to transport MTU (exercising IP layer fragmentation) * ping "LAN IP" served by VPN peer ("LAN behind a client" test case) Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
2025-05-15ovpn: fix ndo_start_xmit return value on errorAntonio Quartulli
ndo_start_xmit is basically expected to always return NETDEV_TX_OK. However, in case of error, it was currently returning NET_XMIT_DROP, which is not a valid netdev_tx_t return value, leading to misinterpretation. Change ndo_start_xmit to always return NETDEV_TX_OK to signal back to the caller that the packet was handled (even if dropped). Effects of this bug can be seen when sending IPv6 packets having no peer to forward them to: $ ip netns exec ovpn-server oping -c20 fd00:abcd:220:201::1 PING fd00:abcd:220:201::1 (fd00:abcd:220:201::1) 56 bytes of data.00:abcd:220:201 :1 ping_send failed: No buffer space available ping_sendto: No buffer space available ping_send failed: No buffer space available ping_sendto: No buffer space available ... Fixes: c2d950c4672a ("ovpn: add basic interface creation/destruction/management routines") Reported-by: Gert Doering <gert@greenie.muc.de> Closes: https://github.com/OpenVPN/ovpn-net-next/issues/5 Tested-by: Gert Doering <gert@greenie.muc.de> Acked-by: Gert Doering <gert@greenie.muc.de> Link: https://www.mail-archive.com/openvpn-devel@lists.sourceforge.net/msg31591.html Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
2025-05-15selftest/net/ovpn: fix crash in case of getaddrinfo() failureAntonio Quartulli
getaddrinfo() may fail with error code different from EAI_FAIL or EAI_NONAME, however in this case we still try to free the results object, thus leading to a crash. Fix this by bailing out on any possible error. Fixes: 959bc330a439 ("testing/selftests: add test tool and scripts for ovpn module") Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
2025-05-15ovpn: don't drop skb's dst when xmitting packetAntonio Quartulli
When routing a packet to a LAN behind a peer, ovpn needs to inspect the route entry that brought the packet there in the first place. If this packet is truly routable, the route entry provides the GW to be used when looking up the VPN peer to send the packet to. However, the route entry is currently dropped before entering the ovpn xmit function, because the IFF_XMIT_DST_RELEASE priv_flag is enabled by default. Clear the IFF_XMIT_DST_RELEASE flag during interface setup to allow the route entry (skb's dst) to survive and thus be inspected by the ovpn routing logic. Fixes: a3aaef8cd173 ("ovpn: implement peer lookup logic") Reported-by: Gert Doering <gert@greenie.muc.de> Closes: https://github.com/OpenVPN/ovpn-net-next/issues/2 Tested-by: Gert Doering <gert@greenie.muc.de> Acked-by: Gert Doering <gert@greenie.muc.de> # as a primary user Link: https://www.mail-archive.com/openvpn-devel@lists.sourceforge.net/msg31583.html Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
2025-05-15ovpn: set skb->ignore_df = 1 before sending IPv6 packets outAntonio Quartulli
IPv6 user packets (sent over the tunnel) may be larger than the outgoing interface MTU after encapsulation. When this happens ovpn should allow the kernel to fragment them because they are "locally generated". To achieve the above, we must set skb->ignore_df = 1 so that ip6_fragment() can be made aware of this decision. Failing to do so will result in ip6_fragment() dropping the packet thinking it was "routed". No change is required in the IPv4 path, because when calling udp_tunnel_xmit_skb() we already pass the 'df' argument set to 0, therefore the resulting datagram is allowed to be fragmented if need be. Fixes: 08857b5ec5d9 ("ovpn: implement basic TX path (UDP)") Reported-by: Gert Doering <gert@greenie.muc.de> Closes: https://github.com/OpenVPN/ovpn-net-next/issues/3 Tested-by: Gert Doering <gert@greenie.muc.de> Acked-by: Gert Doering <gert@greenie.muc.de> # as primary user Link: https://mail-archive.com/openvpn-devel@lists.sourceforge.net/msg31577.html Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
2025-05-15MAINTAINERS: update git URL for ovpnAntonio Quartulli
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
2025-05-15MAINTAINERS: add Sabrina as official reviewer for ovpnAntonio Quartulli
Sabrina put quite some effort in reviewing the ovpn module during its official submission to netdev. For this reason she obtain extensive knowledge of the module architecture and implementation. Make her an official reviewer, so that I can be supported in reviewing and acking new patches. Acked-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
2025-05-15Merge branch 'eth-fbnic-add-devlink-dev-flash-support'Paolo Abeni
Lee Trager says: ==================== eth: fbnic: Add devlink dev flash support fbnic supports updating firmware using signed PLDM images. PLDM images are written into the flash. Flashing does not interrupt the operation of the device. V4: https://lore.kernel.org/netdev/20250510002851.3247880-1-lee@trager.us/T/#t V3: https://lore.kernel.org/lkml/20241111043058.1251632-1-lee@trager.us/T/ V2: https://lore.kernel.org/all/20241022013941.3764567-1-lee@trager.us/ ==================== Link: https://patch.msgid.link/20250512190109.2475614-1-lee@trager.us Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15eth: fbnic: Add devlink dev flash supportLee Trager
Add support to update the CMRT and control firmware as well as the UEFI driver on fbnic using devlink dev flash. Make sure the shutdown / quiescence paths like suspend take the devlink lock to prevent them from interrupting the FW flashing process. Signed-off-by: Lee Trager <lee@trager.us> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250512190109.2475614-6-lee@trager.us Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15eth: fbnic: Add mailbox support for PLDM updatesLee Trager
Add three new mailbox messages to support PLDM upgrades: * FW_START_UPGRADE - Enables driver to request starting a firmware upgrade by specifying the component to be upgraded and its size. * WRITE_CHUNK - Allows firmware to request driver to send a chunk of data at the specified offset. * FINISH_UPGRADE - Allows firmware to cancel the upgrade process and return an error. Signed-off-by: Lee Trager <lee@trager.us> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250512190109.2475614-5-lee@trager.us Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15eth: fbnic: Add support for multiple concurrent completion messagesLee Trager
Extend fbnic mailbox to support multiple concurrent completion messages at once. This enables fbnic to support running multiple operations at once which depend on a response from firmware via the mailbox. Signed-off-by: Lee Trager <lee@trager.us> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250512190109.2475614-4-lee@trager.us Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15eth: fbnic: Accept minimum anti-rollback version from firmwareLee Trager
fbnic supports applying firmware which may not be rolled back. This is implemented in firmware however it is useful for the driver to know the minimum supported firmware version. This will enable the driver validate new firmware before it is sent to the NIC. If it is too old the driver can provide a clear message that the version is too old. Signed-off-by: Lee Trager <lee@trager.us> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250512190109.2475614-3-lee@trager.us Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15pldmfw: Don't require send_package_data or send_component_table to be definedLee Trager
Not all drivers require send_package_data or send_component_table when updating firmware. Instead of forcing drivers to implement a stub allow these functions to go undefined. Signed-off-by: Lee Trager <lee@trager.us> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250512190109.2475614-2-lee@trager.us Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15ALSA: usb-audio: Add sample rate quirk for Microdia JP001 USB CameraNicolas Chauvet
Microdia JP001 does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x84". This patch adds the USB ID to quirks.c and avoids those error messages. usb 7-4: New USB device found, idVendor=0c45, idProduct=636b, bcdDevice= 1.00 usb 7-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3 usb 7-4: Product: JP001 usb 7-4: Manufacturer: JP001 usb 7-4: SerialNumber: JP001 usb 7-4: 3:1: cannot get freq at ep 0x84 Cc: <stable@vger.kernel.org> Signed-off-by: Nicolas Chauvet <kwizart@gmail.com> Link: https://patch.msgid.link/20250515102132.73062-1-kwizart@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-05-15dmaengine: mediatek: drop unused variableVinod Koul
Commit 157ae5ffd76a dmaengine: mediatek: Fix a possible deadlock error in mtk_cqdma_tx_status() fixed locks but kept unused varibale leading to warning and build failure (due to warning treated as errors) drivers/dma/mediatek/mtk-cqdma.c: In function 'mtk_cqdma_find_active_desc': drivers/dma/mediatek/mtk-cqdma.c:423:23: error: unused variable 'flags' [-Werror=unused-variable] 423 | unsigned long flags; | ^~~~~ Fix by dropping this unused flag Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 157ae5ffd76a ("dmaengine: mediatek: Fix a possible deadlock error in mtk_cqdma_tx_status()") Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-15octeontx2-pf: Do not reallocate all ntuple filtersSubbaraya Sundeep
If ntuple filters count is modified followed by unicast filters count using devlink then the ntuple count set by user is ignored and all the ntuple filters are being reallocated. Fix this by storing the ntuple count set by user. Without this patch, say if user tries to modify ntuple count as 8 followed by ucast filter count as 4 using devlink commands then ntuple count is being reverted to default value 16 i.e, not retaining user set value 8. Fixes: 39c469188b6d ("octeontx2-pf: Add ucast filter count configurability via devlink.") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1747054357-5850-1-git-send-email-sbhatta@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15net: phy: marvell-88q2xxx: Enable temperature measurement in probe againDimitri Fedrau
Enabling of the temperature sensor was moved from mv88q2xxx_hwmon_probe to mv88q222x_config_init with the consequence that the sensor is only usable when the PHY is configured. Enable the sensor in mv88q2xxx_hwmon_probe as well to fix this. Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com> Link: https://patch.msgid.link/20250512-marvell-88q2xxx-hwmon-enable-at-probe-v4-1-9256a5c8f603@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15wifi: mt76: mt7925: fix missing hdr_trans_tlv command for broadcast wtblMing Yen Hsieh
Ensure that the hdr_trans_tlv command is included in the broadcast wtbl to prevent the IPv6 and multicast packet from being dropped by the chip. Cc: stable@vger.kernel.org Fixes: cb1353ef3473 ("wifi: mt76: mt7925: integrate *mlo_sta_cmd and *sta_cmd") Reported-by: Benjamin Xiao <fossben@pm.me> Tested-by: Niklas Schnelle <niks@kernel.org> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://lore.kernel.org/lkml/EmWnO5b-acRH1TXbGnkx41eJw654vmCR-8_xMBaPMwexCnfkvKCdlU5u19CGbaapJ3KRu-l3B-tSUhf8CCQwL0odjo6Cd5YG5lvNeB-vfdg=@pm.me/ Link: https://patch.msgid.link/20250509010421.403022-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-15wifi: mt76: disable napi on driver removalFedor Pchelkin
A warning on driver removal started occurring after commit 9dd05df8403b ("net: warn if NAPI instance wasn't shut down"). Disable tx napi before deleting it in mt76_dma_cleanup(). WARNING: CPU: 4 PID: 18828 at net/core/dev.c:7288 __netif_napi_del_locked+0xf0/0x100 CPU: 4 UID: 0 PID: 18828 Comm: modprobe Not tainted 6.15.0-rc4 #4 PREEMPT(lazy) Hardware name: ASUS System Product Name/PRIME X670E-PRO WIFI, BIOS 3035 09/05/2024 RIP: 0010:__netif_napi_del_locked+0xf0/0x100 Call Trace: <TASK> mt76_dma_cleanup+0x54/0x2f0 [mt76] mt7921_pci_remove+0xd5/0x190 [mt7921e] pci_device_remove+0x47/0xc0 device_release_driver_internal+0x19e/0x200 driver_detach+0x48/0x90 bus_remove_driver+0x6d/0xf0 pci_unregister_driver+0x2e/0xb0 __do_sys_delete_module.isra.0+0x197/0x2e0 do_syscall_64+0x7b/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Tested with mt7921e but the same pattern can be actually applied to other mt76 drivers calling mt76_dma_cleanup() during removal. Tx napi is enabled in their *_dma_init() functions and only toggled off and on again inside their suspend/resume/reset paths. So it should be okay to disable tx napi in such a generic way. Found by Linux Verification Center (linuxtesting.org). Fixes: 2ac515a5d74f ("mt76: mt76x02: use napi polling for tx cleanup") Cc: stable@vger.kernel.org Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Tested-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250506115540.19045-1-pchelkin@ispras.ru Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-15xfrm: prevent configuration of interface index when offload is usedLeon Romanovsky
Both packet and crypto offloads perform decryption while packet is arriving to the HW from the wire. It means that there is no possible way to perform lookup on XFRM if_id as it can't be set to be "before' HW. So instead of silently ignore this configuration, let's warn users about misconfiguration. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2025-05-15xfrm: validate assignment of maximal possible SEQ numberLeon Romanovsky
Users can set any seq/seq_hi/oseq/oseq_hi values. The XFRM core code doesn't prevent from them to set even 0xFFFFFFFF, however this value will cause for traffic drop. Is is happening because SEQ numbers here mean that packet with such number was processed and next number should be sent on the wire. In this case, the next number will be 0, and it means overflow which causes to (expected) packet drops. While it can be considered as misconfiguration and handled by XFRM datapath in the same manner as any other SEQ number, let's add validation to easy for packet offloads implementations which need to configure HW with next SEQ to send and not with current SEQ like it is done in core code. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2025-05-15wifi: iwlwifi: mld: allow 2 ROCs on the same vifMiri Korenblit
In the current code, if an ROC is started on a vif that already has an active ROC we reject it and warn. But really there is no such limitation. The actual limitation is to not have 2 ROCs of the same type simultaneously. Add a helper function to find a vif that has an active ROC of a given type, and only if one exist - reject the ROC. This allows also to remove bss_roc_vif. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250511195137.1f8c55198578.I17cb191596ed4e97a4854108f8ca5ca197662a62@changeid
2025-05-15wifi: iwlwifi: fw: api: include required headers in rs/locationJohannes Berg
Various headers are required for these to build properly. Include the needed files. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250511195137.956281013349.I4c537dffb82f5e5042e4a880cde3c6da38a56cbc@changeid
2025-05-15wifi: iwlwifi: rename ctx-info-gen3 to ctx-info-v2Miri Korenblit
Context info was introduced in 22000, and was significantly changed in ax210. The new version of context info was called 'gen3', probably because in 22000, the gen2 transport was added. But this name is just wrong: - if 'gen' enumerates transports, there was not a gen3 transport, just a few modifications to gen1/2 transports needed for ax210. - if 'gen' enumerates devices, then we can just use the device names. Also, context info will soon become a lib, agnostic of the transport generations. Simply replace 'gen3' with 'v2'. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250511195137.a580bd8d4f74.Ie413a02233f1a5ad538e13071c09760b9d97be3b@changeid
2025-05-15wifi: iwlwifi: fix a wrong commentMiri Korenblit
iwl_pcie_apply_destination is used in all generation. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250511195137.7eaf79a07226.I615cfd21001208b366c94a5fcb8e30a7d97f0ac2@changeid
2025-05-15wifi: iwlwifi: map iwl_context_info to the matching structMiri Korenblit
Map iwl_context_info to the matching struct in the FW. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250511195137.a7240935006e.I75e2e13421b5dac2c1bdbd01fdfd34c38f2d3d8c@changeid
2025-05-15wifi: iwlwifi: remove unused macroMiri Korenblit
TFD_QUEUE_SIZE_MAX_GEN3 is not used, remove it. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250511195137.a0154cca6afb.Ifb4915e0acd51be6a75d33a8b96b3f7b0928b312@changeid
2025-05-15wifi: iwlwifi: unify iwlagn_scd_bc_tbl_entry and iwl_gen3_bc_tbl_entryMiri Korenblit
As those are now the same, unify and adjust the documentation. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250511195137.b7ddfade8fec.I2bf97252c4bd751077ade204767eed02d815614d@changeid
2025-05-15wifi: iwlwifi: use bc entries instead of bc table also for pre-ax210Miri Korenblit
iwlagn_scd_bc_tbl is used for pre-ax210 devices, and iwl_gen3_bc_tbl_entry is used for ax210 and on. But there is no difference between the the 22000 version and the AX210+ one. In order to unify the two, as first step make iwlagn_scd_bc_tbl an entry as well, and adjust the code. In a later patch both structures will be unified. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250511195137.645cd82ebf48.Iaa7e88179372d60ef31157e379737b5babe54012@changeid
generated by cgit (git 2.34.1) at 2025-09-13 13:54:15 +0000