summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-08-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: "Simply small driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ads7846 - remove redundant regulator_disable call Input: synaptics-rmi4 - fix register descriptor subpacket map construction Input: tegra-kbc - fix inverted reset logic Input: silead - use devm_gpiod_get Input: i8042 - set up shared ps2_cmd_mutex for AUX ports
2016-08-26Merge tag 'pci-v4.8-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Resource management: - Update "pci=resource_alignment" documentation (Mathias Koehrer) MSI: - Use positive flags in pci_alloc_irq_vectors() (Christoph Hellwig) - Call pci_intx() when using legacy interrupts in pci_alloc_irq_vectors() (Christoph Hellwig) Intel VMD host bridge driver: - Fix infinite loop executing irq's (Keith Busch)" * tag 'pci-v4.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: x86/PCI: VMD: Fix infinite loop executing irq's PCI: Call pci_intx() when using legacy interrupts in pci_alloc_irq_vectors() PCI: Use positive flags in pci_alloc_irq_vectors() PCI: Update "pci=resource_alignment" documentation
2016-08-26mm: silently skip readahead for DAX inodesRoss Zwisler
For DAX inodes we need to be careful to never have page cache pages in the mapping->page_tree. This radix tree should be composed only of DAX exceptional entries and zero pages. ltp's readahead02 test was triggering a warning because we were trying to insert a DAX exceptional entry but found that a page cache page had already been inserted into the tree. This page was being inserted into the radix tree in response to a readahead(2) call. Readahead doesn't make sense for DAX inodes, but we don't want it to report a failure either. Instead, we just return success and don't do any work. Link: http://lkml.kernel.org/r/20160824221429.21158-1-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by: Jeff Moyer <jmoyer@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Jan Kara <jack@suse.com> Cc: <stable@vger.kernel.org> [4.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-26dax: fix device-dax region baseDan Williams
The data offset for a dax region needs to account for a reservation in the resource range. Otherwise, device-dax is allowing mappings directly into the memmap or device-info-block area with crash signatures like the following: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: get_zone_device_page+0x11/0x30 Call Trace: follow_devmap_pmd+0x298/0x2c0 follow_page_mask+0x275/0x530 __get_user_pages+0xe3/0x750 __gfn_to_pfn_memslot+0x1b2/0x450 [kvm] tdp_page_fault+0x130/0x280 [kvm] kvm_mmu_page_fault+0x5f/0xf0 [kvm] handle_ept_violation+0x94/0x180 [kvm_intel] vmx_handle_exit+0x1d3/0x1440 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x81d/0x16a0 [kvm] kvm_vcpu_ioctl+0x33c/0x620 [kvm] do_vfs_ioctl+0xa2/0x5d0 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x1a/0xa4 Fixes: ab68f2622136 ("/dev/dax, pmem: direct access to persistent memory") Link: http://lkml.kernel.org/r/147205536732.1606.8994275381938837346.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reported-by: Abhilash Kumar Mulumudi <m.abhilash-kumar@hpe.com> Reported-by: Toshi Kani <toshi.kani@hpe.com> Tested-by: Toshi Kani <toshi.kani@hpe.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-26fs/seq_file: fix out-of-bounds readVegard Nossum
seq_read() is a nasty piece of work, not to mention buggy. It has (I think) an old bug which allows unprivileged userspace to read beyond the end of m->buf. I was getting these: BUG: KASAN: slab-out-of-bounds in seq_read+0xcd2/0x1480 at addr ffff880116889880 Read of size 2713 by task trinity-c2/1329 CPU: 2 PID: 1329 Comm: trinity-c2 Not tainted 4.8.0-rc1+ #96 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 Call Trace: kasan_object_err+0x1c/0x80 kasan_report_error+0x2cb/0x7e0 kasan_report+0x4e/0x80 check_memory_region+0x13e/0x1a0 kasan_check_read+0x11/0x20 seq_read+0xcd2/0x1480 proc_reg_read+0x10b/0x260 do_loop_readv_writev.part.5+0x140/0x2c0 do_readv_writev+0x589/0x860 vfs_readv+0x7b/0xd0 do_readv+0xd8/0x2c0 SyS_readv+0xb/0x10 do_syscall_64+0x1b3/0x4b0 entry_SYSCALL64_slow_path+0x25/0x25 Object at ffff880116889100, in cache kmalloc-4096 size: 4096 Allocated: PID = 1329 save_stack_trace+0x26/0x80 save_stack+0x46/0xd0 kasan_kmalloc+0xad/0xe0 __kmalloc+0x1aa/0x4a0 seq_buf_alloc+0x35/0x40 seq_read+0x7d8/0x1480 proc_reg_read+0x10b/0x260 do_loop_readv_writev.part.5+0x140/0x2c0 do_readv_writev+0x589/0x860 vfs_readv+0x7b/0xd0 do_readv+0xd8/0x2c0 SyS_readv+0xb/0x10 do_syscall_64+0x1b3/0x4b0 return_from_SYSCALL_64+0x0/0x6a Freed: PID = 0 (stack is not available) Memory state around the buggy address: ffff88011688a000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88011688a080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff88011688a100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff88011688a180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88011688a200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Disabling lock debugging due to kernel taint This seems to be the same thing that Dave Jones was seeing here: https://lkml.org/lkml/2016/8/12/334 There are multiple issues here: 1) If we enter the function with a non-empty buffer, there is an attempt to flush it. But it was not clearing m->from after doing so, which means that if we try to do this flush twice in a row without any call to traverse() in between, we are going to be reading from the wrong place -- the splat above, fixed by this patch. 2) If there's a short write to userspace because of page faults, the buffer may already contain multiple lines (i.e. pos has advanced by more than 1), but we don't save the progress that was made so the next call will output what we've already returned previously. Since that is a much less serious issue (and I have a headache after staring at seq_read() for the past 8 hours), I'll leave that for now. Link: http://lkml.kernel.org/r/1471447270-32093-1-git-send-email-vegard.nossum@oracle.com Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Reported-by: Dave Jones <davej@codemonkey.org.uk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-26mm: memcontrol: avoid unused function warningArnd Bergmann
A bugfix in v4.8-rc2 introduced a harmless warning when CONFIG_MEMCG_SWAP is disabled but CONFIG_MEMCG is enabled: mm/memcontrol.c:4085:27: error: 'mem_cgroup_id_get_online' defined but not used [-Werror=unused-function] static struct mem_cgroup *mem_cgroup_id_get_online(struct mem_cgroup *memcg) This moves the function inside of the #ifdef block that hides the calling function, to avoid the warning. Fixes: 1f47b61fb407 ("mm: memcontrol: fix swap counter leak on swapout from offline cgroup") Link: http://lkml.kernel.org/r/20160824113733.2776701-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-26mm: clarify COMPACTION Kconfig textMichal Hocko
The current wording of the COMPACTION Kconfig help text doesn't emphasise that disabling COMPACTION might cripple the page allocator which relies on the compaction quite heavily for high order requests and an unexpected OOM can happen with the lack of compaction. Make sure we are vocal about that. Link: http://lkml.kernel.org/r/20160823091726.GK23577@dhcp22.suse.cz Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-26treewide: replace config_enabled() with IS_ENABLED() (2nd round)Masahiro Yamada
Commit 97f2645f358b ("tree-wide: replace config_enabled() with IS_ENABLED()") mostly killed config_enabled(), but some new users have appeared for v4.8-rc1. They are all used for a boolean option, so can be replaced with IS_ENABLED() safely. Link: http://lkml.kernel.org/r/1471970749-24867-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-26printk: fix parsing of "brl=" optionNicolas Iooss
Commit bbeddf52adc1 ("printk: move braille console support into separate braille.[ch] files") moved the parsing of braille-related options into _braille_console_setup(), changing the type of variable str from char* to char**. In this commit, memcmp(str, "brl,", 4) was correctly updated to memcmp(*str, "brl,", 4) but not memcmp(str, "brl=", 4). Update the code to make "brl=" option work again and replace memcmp() with strncmp() to make the compiler able to detect such an issue. Fixes: bbeddf52adc1 ("printk: move braille console support into separate braille.[ch] files") Link: http://lkml.kernel.org/r/20160823165700.28952-1-nicolas.iooss_linux@m4x.org Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-26soft_dirty: fix soft_dirty during THP splitAndrea Arcangeli
While adding proper userfaultfd_wp support with bits in pagetable and swap entry to avoid false positives WP userfaults through swap/fork/ KSM/etc, I've been adding a framework that mostly mirrors soft dirty. So I noticed in one place I had to add uffd_wp support to the pagetables that wasn't covered by soft_dirty and I think it should have. Example: in the THP migration code migrate_misplaced_transhuge_page() pmd_mkdirty is called unconditionally after mk_huge_pmd. entry = mk_huge_pmd(new_page, vma->vm_page_prot); entry = maybe_pmd_mkwrite(pmd_mkdirty(entry), vma); That sets soft dirty too (it's a false positive for soft dirty, the soft dirty bit could be more finegrained and transfer the bit like uffd_wp will do.. pmd/pte_uffd_wp() enforces the invariant that when it's set pmd/pte_write is not set). However in the THP split there's no unconditional pmd_mkdirty after mk_huge_pmd and pte_swp_mksoft_dirty isn't called after the migration entry is created. The code sets the dirty bit in the struct page instead of setting it in the pagetable (which is fully equivalent as far as the real dirty bit is concerned, as the whole point of pagetable bits is to be eventually flushed out of to the page, but that is not equivalent for the soft-dirty bit that gets lost in translation). This was found by code review only and totally untested as I'm working to actually replace soft dirty and I don't have time to test potential soft dirty bugfixes as well :). Transfer the soft_dirty from pmd to pte during THP splits. This fix avoids losing the soft_dirty bit and avoids userland memory corruption in the checkpoint. Fixes: eef1b3ba053aa6 ("thp: implement split_huge_pmd()") Link: http://lkml.kernel.org/r/1471610515-30229-2-git-send-email-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@virtuozzo.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-26sysctl: handle error writing UINT_MAX to u32 fieldsSubash Abhinov Kasiviswanathan
We have scripts which write to certain fields on 3.18 kernels but this seems to be failing on 4.4 kernels. An entry which we write to here is xfrm_aevent_rseqth which is u32. echo 4294967295 > /proc/sys/net/core/xfrm_aevent_rseqth Commit 230633d109e3 ("kernel/sysctl.c: detect overflows when converting to int") prevented writing to sysctl entries when integer overflow occurs. However, this does not apply to unsigned integers. Heinrich suggested that we introduce a new option to handle 64 bit limits and set min as 0 and max as UINT_MAX. This might not work as it leads to issues similar to __do_proc_doulongvec_minmax. Alternatively, we would need to change the datatype of the entry to 64 bit. static int __do_proc_doulongvec_minmax(void *data, struct ctl_table { i = (unsigned long *) data; //This cast is causing to read beyond the size of data (u32) vleft = table->maxlen / sizeof(unsigned long); //vleft is 0 because maxlen is sizeof(u32) which is lesser than sizeof(unsigned long) on x86_64. Introduce a new proc handler proc_douintvec. Individual proc entries will need to be updated to use the new handler. [akpm@linux-foundation.org: coding-style fixes] Fixes: 230633d109e3 ("kernel/sysctl.c:detect overflows when converting to int") Link: http://lkml.kernel.org/r/1471479806-5252-1-git-send-email-subashab@codeaurora.org Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Kees Cook <keescook@chromium.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-26get_maintainer: quiet noisy implicit -f vcs_file_exists checkingJoe Perches
Checking command line filenames that are outside the git tree can emit a noisy and confusing message. Quiet that message by redirecting stderr. Verify that the command was executed successfully. Fixes: 4cad35a7ca69 ("get_maintainer.pl: reduce need for command-line option -f") Link: http://lkml.kernel.org/r/1970a1d2fecb258e384e2e4fdaacdc9ccf3e30a4.1470955439.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Reported-by: Wolfram Sang <wsa@the-dreams.de> Tested-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-26byteswap: don't use __builtin_bswap*() with sparseJohannes Berg
Although sparse declares __builtin_bswap*(), it can't actually do constant folding inside them (yet). As such, things like switch (protocol) { case htons(ETH_P_IP): break; } which we do all over the place cause sparse to warn that it expects a constant instead of a function call. Disable __HAVE_BUILTIN_BSWAP*__ if __CHECKER__ is defined to avoid this. Fixes: 7322dd755e7d ("byteswap: try to avoid __builtin_constant_p gcc bug") Link: http://lkml.kernel.org/r/1470914102-26389-1-git-send-email-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-26arm64: dts: apq8016-sbc: Add HDMI display supportArchit Taneja
The APQ8016-sbc provides a HDMI output. The APQ8016 display block only provides a MIPI DSI output. So, the board has a ADV7533 DSI to HDMI encoder chip that sits between the DSI PHY output and the HDMI connector. Add the ADV7533 DT node under its I2C control bus, and tie the DSI output port to the ADV7533's input port. Cc: Andy Gross <andy.gross@linaro.org> Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-26arm64: dts: msm8916: Add display supportArchit Taneja
The MSM8916 SoC contains a MDP5 based display block, and one DSI output. Add the top level MDSS DT node, and the MDP5, DSI and DSI PHY children sub-blocks. Establish the link between MDP5's INTF1 output port and DSI's input port. Cc: Andy Gross <andy.gross@linaro.org> Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Archit Taneja <architt@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-26dlm: fix malfunction of dlm_tool caused by debugfs changesEric Ren
With the current kernel, `dlm_tool lockdebug` fails as below: "dlm_tool lockdebug ED0BD86DCE724393918A1AE8FDBF1EE3 can't open /sys/kernel/debug/dlm/ED0BD86DCE724393918A1AE8FDBF1EE3: Operation not permitted" This is because table_open() depends on file->f_op to tell which seq_file ops should be passed down. But, the original file ops in file->f_op is replaced by "debugfs_full_proxy_file_operations" with commit 49d200deaa68 ("debugfs: prevent access to removed files' private data"). Currently, I can think up 2 solutions: 1st, replace debugfs_create_file() with debugfs_create_file_unsafe(); 2nd, make different table_open#() accordingly. The 1st one is neat, but I don't thoroughly understand its risk. Maybe someone has a better one. Signed-off-by: Eric Ren <zren@suse.com> Signed-off-by: David Teigland <teigland@redhat.com>
2016-08-26clocksource/drivers/sun4i: Clear interrupts after stopping timer in probe ↵Chen-Yu Tsai
function The bootloader (U-boot) sometimes uses this timer for various delays. It uses it as a ongoing counter, and does comparisons on the current counter value. The timer counter is never stopped. In some cases when the user interacts with the bootloader, or lets it idle for some time before loading Linux, the timer may expire, and an interrupt will be pending. This results in an unexpected interrupt when the timer interrupt is enabled by the kernel, at which point the event_handler isn't set yet. This results in a NULL pointer dereference exception, panic, and no way to reboot. Clear any pending interrupts after we stop the timer in the probe function to avoid this. Cc: stable@vger.kernel.org Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-08-26drivers/clocksource/pistachio: Fix memory corruption in initMarcin Nowakowski
Driver init code incorrectly uses the block base address and as a result clears clocksource structure's fields instead of the hardware registers. Commit 09a998201649 ("timekeeping: Lift clocksource cacheline restriction") has changed the offsets within pistachio_clocksource structure and what has previously gone unnoticed now leads to a kernel panic during boot. Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-08-26clocksource/drivers/timer-atmel-pit: Enable mck clockAlexandre Belloni
mck is needed to get the PIT working. Explicitly prepare_enable it instead of assuming it is enabled. This solves an issue where the system is freezing when the ETM/ETB drivers are enabled. Reported-by: Olivier Schonken <olivier.schonken@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-08-26arm64: dts: rockchip: set to CCI clock of RK3399 to 600MShunqian Zheng
Per testing, this can reduce the memory latency and d8 gets better scores. Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-08-26arm64: dts: rockchip: fix the address map for WDT0 and WDT1Xing Zheng
Due to incorrect description in the TRM, the WDTs base address should be fixed and swap them like this: WDT0 - 0xff848000 WDT1 - 0xff840000 And, it is right that only WDT0 can generate global software reset. We will update the TRM to fix it. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-08-26arm64: dts: marvell: describe the PIC and PMU on Armada 7K/8KThomas Petazzoni
This commit adds the necessary Device Tree description for the PIC interrupt controller and the PMU available in the Marvell Armada 7K and Armada 8K SoCs. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-08-25mmc: fix use-after-free of struct requestAdrian Hunter
We call mmc_req_is_special() after having processed a request, but it could be freed after that. Check that ahead of time, and use the cached value. Reported-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Fixes: c2df40dfb8c0 ("drivers: use req op accessor") Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-26Merge tag 'drm-intel-fixes-2016-08-25' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes i915 fixes queue. * tag 'drm-intel-fixes-2016-08-25' of git://anongit.freedesktop.org/drm-intel: drm/i915: Fix botched merge that downgrades CSR versions. drm/i915/skl: Ensure pipes with changed wms get added to the state drm/i915/gen9: Only copy WM results for changed pipes to skl_hw drm/i915/skl: Add support for the SAGV, fix underrun hangs drm/i915/gen6+: Interpret mailbox error flags drm/i915: Reattach comment, complete type specification drm/i915: Unconditionally flush any chipset buffers before execbuf drm/i915/gen9: Drop invalid WARN() during data rate calculation drm/i915/gen9: Initialize intel_state->active_crtcs during WM sanitization (v2)
2016-08-26drm: Protect fb_defio in drivers with CONFIG_KMS_FBDEV_EMULATIONDaniel Vetter
For reasons that entirely elude me fb.h exposes all the structures, even when it is not enabled. Except for special stuff like fb_defio. Which means all the drivers which haven't yet switched over to the defio support in the helpers and still roll their own, will fail to compile when fbdev emulation is disabled. Protect just those bits, as a gnarly reminder that conversion to the core defio helpers would be good. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-6-git-send-email-daniel.vetter@ffwll.ch Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-08-25Merge tag 'asoc-fix-v4.8-rc4' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.8 A clutch of fixes for v4.8. These are mainly driver specific, the most notable ones being those for OMAP which fix a series of issues that broke boot on some platforms there when deferred probe kicked in. There's also one core fix for an issue when unbinding a card which for some reason had managed to not manifest until recently.
2016-08-25arm64: dts: db820c: add support to external sd card.Srinivas Kandagatla
This patch adds support to external sd card. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-25arm64: dts: db820c: add support to SPI on HSSrinivas Kandagatla
This patch adds support to SPI on HS expansion connector. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-25arm64: dts: db820c: add support to LS-SPI0Srinivas Kandagatla
This patch adds support to SPI on LS expansion connector. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-25arm64: dts: db820c: add support to I2C on HSSrinivas Kandagatla
This patch adds support to i2c bus on High speed connector. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-25arm64: dts: db820c: add support to LS-I2C1Srinivas Kandagatla
This patch adds support to LS_I2C1 on LS expansion connector. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-25arm64: dts: db820c: add support to LS-I2C0Srinivas Kandagatla
This patch adds support to LS-I2C0 on LS expansion connector. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-25arm64: dts: db820c: add support to LS-UART0Srinivas Kandagatla
This patch adds support to 4 pin UART0 on LS expansion connector. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-25arm64: dts: db820c: add basic board supportSrinivas Kandagatla
This patch adds apq8096 db820c basic support with serial port. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-25Merge branch 'misc-fixes' into k.o/for-4.8-rcDoug Ledford
2016-08-25i40iw: Send last streaming mode message for loopback connectionsTatyana Nikolova
Send a zero length last streaming mode message for loopback connections to synchronize between accepting QP and connecting QP. This avoids data transfer to start on the accepting QP before the connecting QP is in RTS. Also remove function i40iw_loopback_nop() as it is no longer used. Fixes: f27b4746f378 ("i40iw: add connection management code") Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-25Revert "floppy: refactor open() flags handling"Jens Axboe
This reverts commit 09954bad448791ef01202351d437abdd9497a804.
2016-08-25Revert "floppy: fix open(O_ACCMODE) for ioctl-only open"Jens Axboe
This reverts commit ff06db1efb2ad6db06eb5b99b88a0c15a9cc9b0e.
2016-08-25fs/block_dev: fix potential NULL ptr deref in freeze_bdev()Andrey Ryabinin
Calling freeze_bdev() twice on the same block device without mounted filesystem get_super() will return NULL, which will lead to NULL-ptr dereference later in drop_super(). Check get_super() result to fix that. Note, that this is a purely theoretical issue. We have only 3 freeze_bdev() callers. 2 of them are in filesystem code and used on a device with mounted fs. The third one in lock_fs() has protection in upper-layer code against freezing block device the second time without thawing it first. Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-25Btrfs: fix lockdep warning on deadlock against an inode's log mutexFilipe Manana
Commit 44f714dae50a ("Btrfs: improve performance on fsync against new inode after rename/unlink"), which landed in 4.8-rc2, introduced a possibility for a deadlock due to double locking of an inode's log mutex by the same task, which lockdep reports with: [23045.433975] ============================================= [23045.434748] [ INFO: possible recursive locking detected ] [23045.435426] 4.7.0-rc6-btrfs-next-34+ #1 Not tainted [23045.436044] --------------------------------------------- [23045.436044] xfs_io/3688 is trying to acquire lock: [23045.436044] (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] but task is already holding lock: [23045.436044] (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] other info that might help us debug this: [23045.436044] Possible unsafe locking scenario: [23045.436044] CPU0 [23045.436044] ---- [23045.436044] lock(&ei->log_mutex); [23045.436044] lock(&ei->log_mutex); [23045.436044] *** DEADLOCK *** [23045.436044] May be due to missing lock nesting notation [23045.436044] 3 locks held by xfs_io/3688: [23045.436044] #0: (&sb->s_type->i_mutex_key#15){+.+...}, at: [<ffffffffa035f2ae>] btrfs_sync_file+0x14e/0x425 [btrfs] [23045.436044] #1: (sb_internal#2){.+.+.+}, at: [<ffffffff8118446b>] __sb_start_write+0x5f/0xb0 [23045.436044] #2: (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] stack backtrace: [23045.436044] CPU: 4 PID: 3688 Comm: xfs_io Not tainted 4.7.0-rc6-btrfs-next-34+ #1 [23045.436044] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014 [23045.436044] 0000000000000000 ffff88022f5f7860 ffffffff8127074d ffffffff82a54b70 [23045.436044] ffffffff82a54b70 ffff88022f5f7920 ffffffff81092897 ffff880228015d68 [23045.436044] 0000000000000000 ffffffff82a54b70 ffffffff829c3f00 ffff880228015d68 [23045.436044] Call Trace: [23045.436044] [<ffffffff8127074d>] dump_stack+0x67/0x90 [23045.436044] [<ffffffff81092897>] __lock_acquire+0xcbb/0xe4e [23045.436044] [<ffffffff8109155f>] ? mark_lock+0x24/0x201 [23045.436044] [<ffffffff8109179a>] ? mark_held_locks+0x5e/0x74 [23045.436044] [<ffffffff81092de0>] lock_acquire+0x12f/0x1c3 [23045.436044] [<ffffffff81092de0>] ? lock_acquire+0x12f/0x1c3 [23045.436044] [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] [<ffffffff814a51a4>] mutex_lock_nested+0x77/0x3a7 [23045.436044] [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] [<ffffffffa039705e>] ? btrfs_release_delayed_node+0xb/0xd [btrfs] [23045.436044] [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs] [23045.436044] [<ffffffff810a0ed1>] ? vprintk_emit+0x453/0x465 [23045.436044] [<ffffffffa0385a61>] btrfs_log_inode+0x66e/0xc95 [btrfs] [23045.436044] [<ffffffffa03c084d>] log_new_dir_dentries+0x26c/0x359 [btrfs] [23045.436044] [<ffffffffa03865aa>] btrfs_log_inode_parent+0x4a6/0x628 [btrfs] [23045.436044] [<ffffffffa0387552>] btrfs_log_dentry_safe+0x5a/0x75 [btrfs] [23045.436044] [<ffffffffa035f464>] btrfs_sync_file+0x304/0x425 [btrfs] [23045.436044] [<ffffffff811acaf4>] vfs_fsync_range+0x8c/0x9e [23045.436044] [<ffffffff811acb22>] vfs_fsync+0x1c/0x1e [23045.436044] [<ffffffff811acc79>] do_fsync+0x31/0x4a [23045.436044] [<ffffffff811ace99>] SyS_fsync+0x10/0x14 [23045.436044] [<ffffffff814a88e5>] entry_SYSCALL_64_fastpath+0x18/0xa8 [23045.436044] [<ffffffff8108f039>] ? trace_hardirqs_off_caller+0x3f/0xaa An example reproducer for this is: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ mkdir /mnt/dir $ touch /mnt/dir/foo $ sync $ mv /mnt/dir/foo /mnt/dir/bar $ touch /mnt/dir/foo $ xfs_io -c "fsync" /mnt/dir/bar This is because while logging the inode of file bar we end up logging its parent directory (since its inode has an unlink_trans field matching the current transaction id due to the rename operation), which in turn logs the inodes for all its new dentries, so that the new inode for the new file named foo gets logged which in turn triggered another logging attempt for the inode we are fsync'ing, since that inode had an old name that corresponds to the name of the new inode. So fix this by ensuring that when logging the inode for a new dentry that has a name matching an old name of some other inode, we don't log again the original inode that we are fsync'ing. Fixes: 44f714dae50a ("Btrfs: improve performance on fsync against new inode after rename/unlink") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25Btrfs: detect corruption when non-root leaf has zero itemLiu Bo
Right now we treat leaf which has zero item as a valid one because we could have an empty tree, that is, a root that is also a leaf without any item, however, in the same case but when the leaf is not a root, we can end up with hitting the BUG_ON(1) in btrfs_extend_item() called by setup_inline_extent_backref(). This makes us check the situation as a corruption if leaf is not its own root. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25Btrfs: check btree node's nritemsLiu Bo
When btree node (level = 1) has nritems which equals to zero, we can end up with panic due to insert_ptr()'s BUG_ON(slot > nritems); where slot is 1 and nritems is 0, as copy_for_split() calls insert_ptr(.., path->slots[1] + 1, ...); A invalid value results in the whole mess, this adds the check for btree's node nritems so that we stop reading block when when something is wrong. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25btrfs: don't create or leak aliased root while cleaning up orphansJeff Mahoney
commit 909c3a22da3 (Btrfs: fix loading of orphan roots leading to BUG_ON) avoids the BUG_ON but can add an aliased root to the dead_roots list or leak the root. Since we've already been loading roots into the radix tree, we should use it before looking the root up on disk. Cc: <stable@vger.kernel.org> # 4.5 Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25Btrfs: fix em leak in find_first_block_groupJosef Bacik
We need to call free_extent_map() on the em we look up. Signed-off-by: Josef Bacik <jbacik@fb.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25btrfs: do not background blkdev_put()Anand Jain
At the end of unmount/dev-delete, if the device exclusive open is not actually closed, then there might be a race with another program in the userland who is trying to open the device in exclusive mode and it may fail for eg: unmount /btrfs; fsck /dev/x btrfs dev del /dev/x /btrfs; fsck /dev/x so here background blkdev_put() is not a choice Signed-off-by: Anand Jain <Anand.Jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25Btrfs: clarify do_chunk_alloc()'s return valueLiu Bo
Function start_transaction() can return ERR_PTR(1) when flush is BTRFS_RESERVE_FLUSH_LIMIT, so the call graph is start_transaction (return ERR_PTR(1)) -> btrfs_block_rsv_add (return 1) -> reserve_metadata_bytes (return 1) -> flush_space (return 1) -> do_chunk_alloc (return 1) With BTRFS_RESERVE_FLUSH_LIMIT, if flush_space is already on the flush_state of ALLOC_CHUNK and it successfully allocates a new chunk, then instead of trying to reserve space again, reserve_metadata_bytes returns 1 immediately. Eventually the callers who call start_transaction() usually just do the IS_ERR() check which ERR_PTR(1) can pass, then it'll get a panic when dereferencing a pointer which is ERR_PTR(1). The following patch fixes the above problem. "btrfs: flush_space: treat return value of do_chunk_alloc properly" https://patchwork.kernel.org/patch/7778651/ This add comments to clarify do_chunk_alloc()'s return value. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25btrfs: fix fsfreeze hang caused by delayed iputs dealWang Xiaoguang
When running fstests generic/068, sometimes we got below deadlock: xfs_io D ffff8800331dbb20 0 6697 6693 0x00000080 ffff8800331dbb20 ffff88007acfc140 ffff880034d895c0 ffff8800331dc000 ffff880032d243e8 fffffffeffffffff ffff880032d24400 0000000000000001 ffff8800331dbb38 ffffffff816a9045 ffff880034d895c0 ffff8800331dbba8 Call Trace: [<ffffffff816a9045>] schedule+0x35/0x80 [<ffffffff816abab2>] rwsem_down_read_failed+0xf2/0x140 [<ffffffff8118f5e1>] ? __filemap_fdatawrite_range+0xd1/0x100 [<ffffffff8134f978>] call_rwsem_down_read_failed+0x18/0x30 [<ffffffffa06631fc>] ? btrfs_alloc_block_rsv+0x2c/0xb0 [btrfs] [<ffffffff810d32b5>] percpu_down_read+0x35/0x50 [<ffffffff81217dfc>] __sb_start_write+0x2c/0x40 [<ffffffffa067f5d5>] start_transaction+0x2a5/0x4d0 [btrfs] [<ffffffffa067f857>] btrfs_join_transaction+0x17/0x20 [btrfs] [<ffffffffa068ba34>] btrfs_evict_inode+0x3c4/0x5d0 [btrfs] [<ffffffff81230a1a>] evict+0xba/0x1a0 [<ffffffff812316b6>] iput+0x196/0x200 [<ffffffffa06851d0>] btrfs_run_delayed_iputs+0x70/0xc0 [btrfs] [<ffffffffa067f1d8>] btrfs_commit_transaction+0x928/0xa80 [btrfs] [<ffffffffa0646df0>] btrfs_freeze+0x30/0x40 [btrfs] [<ffffffff81218040>] freeze_super+0xf0/0x190 [<ffffffff81229275>] do_vfs_ioctl+0x4a5/0x5c0 [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70 [<ffffffff810038cf>] ? syscall_trace_enter_phase1+0x11f/0x140 [<ffffffff81229409>] SyS_ioctl+0x79/0x90 [<ffffffff81003c12>] do_syscall_64+0x62/0x110 [<ffffffff816acbe1>] entry_SYSCALL64_slow_path+0x25/0x25 >From this warning, freeze_super() already holds SB_FREEZE_FS, but btrfs_freeze() will call btrfs_commit_transaction() again, if btrfs_commit_transaction() finds that it has delayed iputs to handle, it'll start_transaction(), which will try to get SB_FREEZE_FS lock again, then deadlock occurs. The root cause is that in btrfs, sync_filesystem(sb) does not make sure all metadata is updated. There still maybe some codes adding delayed iputs, see below sample race window: CPU1 | CPU2 |-> freeze_super() | |-> sync_filesystem(sb); | | |-> cleaner_kthread() | | |-> btrfs_delete_unused_bgs() | | |-> btrfs_remove_chunk() | | |-> btrfs_remove_block_group() | | |-> btrfs_add_delayed_iput() | | |-> sb->s_writers.frozen = SB_FREEZE_FS; | |-> sb_wait_write(sb, SB_FREEZE_FS); | | acquire SB_FREEZE_FS lock. | | | |-> btrfs_freeze() | |-> btrfs_commit_transaction() | |-> btrfs_run_delayed_iputs() | | will handle delayed iputs, | | that means start_transaction() | | will be called, which will try | | to get SB_FREEZE_FS lock. | To fix this issue, introduce a "int fs_frozen" to record internally whether fs has been frozen. If fs has been frozen, we can not handle delayed iputs. Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com> [ add comment to btrfs_freeze ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25btrfs: update btrfs_space_info's bytes_may_use timelyWang Xiaoguang
This patch can fix some false ENOSPC errors, below test script can reproduce one false ENOSPC error: #!/bin/bash dd if=/dev/zero of=fs.img bs=$((1024*1024)) count=128 dev=$(losetup --show -f fs.img) mkfs.btrfs -f -M $dev mkdir /tmp/mntpoint mount $dev /tmp/mntpoint cd /tmp/mntpoint xfs_io -f -c "falloc 0 $((64*1024*1024))" testfile Above script will fail for ENOSPC reason, but indeed fs still has free space to satisfy this request. Please see call graph: btrfs_fallocate() |-> btrfs_alloc_data_chunk_ondemand() | bytes_may_use += 64M |-> btrfs_prealloc_file_range() |-> btrfs_reserve_extent() |-> btrfs_add_reserved_bytes() | alloc_type is RESERVE_ALLOC_NO_ACCOUNT, so it does not | change bytes_may_use, and bytes_reserved += 64M. Now | bytes_may_use + bytes_reserved == 128M, which is greater | than btrfs_space_info's total_bytes, false enospc occurs. | Note, the bytes_may_use decrease operation will be done in | end of btrfs_fallocate(), which is too late. Here is another simple case for buffered write: CPU 1 | CPU 2 | |-> cow_file_range() |-> __btrfs_buffered_write() |-> btrfs_reserve_extent() | | | | | | | | | ..... | |-> btrfs_check_data_free_space() | | | | |-> extent_clear_unlock_delalloc() | In CPU 1, btrfs_reserve_extent()->find_free_extent()-> btrfs_add_reserved_bytes() do not decrease bytes_may_use, the decrease operation will be delayed to be done in extent_clear_unlock_delalloc(). Assume in this case, btrfs_reserve_extent() reserved 128MB data, CPU2's btrfs_check_data_free_space() tries to reserve 100MB data space. If 100MB > data_sinfo->total_bytes - data_sinfo->bytes_used - data_sinfo->bytes_reserved - data_sinfo->bytes_pinned - data_sinfo->bytes_readonly - data_sinfo->bytes_may_use btrfs_check_data_free_space() will try to allcate new data chunk or call btrfs_start_delalloc_roots(), or commit current transaction in order to reserve some free space, obviously a lot of work. But indeed it's not necessary as long as decreasing bytes_may_use timely, we still have free space, decreasing 128M from bytes_may_use. To fix this issue, this patch chooses to update bytes_may_use for both data and metadata in btrfs_add_reserved_bytes(). For compress path, real extent length may not be equal to file content length, so introduce a ram_bytes argument for btrfs_reserve_extent(), find_free_extent() and btrfs_add_reserved_bytes(), it's becasue bytes_may_use is increased by file content length. Then compress path can update bytes_may_use correctly. Also now we can discard RESERVE_ALLOC_NO_ACCOUNT, RESERVE_ALLOC and RESERVE_FREE. As we know, usually EXTENT_DO_ACCOUNTING is used for error path. In run_delalloc_nocow(), for inode marked as NODATACOW or extent marked as PREALLOC, we also need to update bytes_may_use, but can not pass EXTENT_DO_ACCOUNTING, because it also clears metadata reservation, so here we introduce EXTENT_CLEAR_DATA_RESV flag to indicate btrfs_clear_bit_hook() to update btrfs_space_info's bytes_may_use. Meanwhile __btrfs_prealloc_file_range() will call btrfs_free_reserved_data_space() internally for both sucessful and failed path, btrfs_prealloc_file_range()'s callers does not need to call btrfs_free_reserved_data_space() any more. Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25btrfs: divide btrfs_update_reserved_bytes() into two functionsWang Xiaoguang
This patch divides btrfs_update_reserved_bytes() into btrfs_add_reserved_bytes() and btrfs_free_reserved_bytes(), and next patch will extend btrfs_add_reserved_bytes（）to fix some false ENOSPC error, please see later patch for detailed info. Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25btrfs: use correct offset for reloc_inode in prealloc_file_extent_cluster()Wang Xiaoguang
In prealloc_file_extent_cluster(), btrfs_check_data_free_space() uses wrong file offset for reloc_inode, it uses cluster->start and cluster->end, which indeed are extent's bytenr. The correct value should be cluster->[start|end] minus block group's start bytenr. start bytenr cluster->start | | extent | extent | ...| extent | |----------------------------------------------------------------| | block group reloc_inode | Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
generated by cgit (git 2.34.1) at 2025-09-13 16:05:16 +0000