summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-12-19net: Disable GRO_HW when generic XDP is installed on a device.Michael Chan
Hardware should not aggregate any packets when generic XDP is installed. Cc: Ariel Elior <Ariel.Elior@cavium.com> Cc: everest-linux-l2@cavium.com Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19net: Introduce NETIF_F_GRO_HW.Michael Chan
Introduce NETIF_F_GRO_HW feature flag for NICs that support hardware GRO. With this flag, we can now independently turn on or off hardware GRO when GRO is on. Previously, drivers were using NETIF_F_GRO to control hardware GRO and so it cannot be independently turned on or off without affecting GRO. Hardware GRO (just like GRO) guarantees that packets can be re-segmented by TSO/GSO to reconstruct the original packet stream. Logically, GRO_HW should depend on GRO since it a subset, but we will let individual drivers enforce this dependency as they see fit. Since NETIF_F_GRO is not propagated between upper and lower devices, NETIF_F_GRO_HW should follow suit since it is a subset of GRO. In other words, a lower device can independent have GRO/GRO_HW enabled or disabled and no feature propagation is required. This will preserve the current GRO behavior. This can be changed later if we decide to propagate GRO/ GRO_HW/RXCSUM from upper to lower devices. Cc: Ariel Elior <Ariel.Elior@cavium.com> Cc: everest-linux-l2@cavium.com Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19tg3: Fix rx hang on MTU change with 5717/5719Brian King
This fixes a hang issue seen when changing the MTU size from 1500 MTU to 9000 MTU on both 5717 and 5719 chips. In discussion with Broadcom, they've indicated that these chipsets have the same phy as the 57766 chipset, so the same workarounds apply. This has been tested by IBM on both Power 8 and Power 9 systems as well as by Broadcom on x86 hardware and has been confirmed to resolve the hang issue. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19sock: Hide unused variable when !CONFIG_PROC_FS.Tonghao Zhang
When CONFIG_PROC_FS is disabled, we will not use the prot_inuse counter. This adds an #ifdef to hide the variable definition in that case. This is not a bugfix. But we can save bytes when there are many network namespace. Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Martin Zhang <zhangjunweimartin@didichuxing.com> Signed-off-by: Tonghao Zhang <zhangtonghao@didichuxing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19sock: Move the socket inuse to namespace.Tonghao Zhang
In some case, we want to know how many sockets are in use in different _net_ namespaces. It's a key resource metric. This patch add a member in struct netns_core. This is a counter for socket-inuse in the _net_ namespace. The patch will add/sub counter in the sk_alloc, sk_clone_lock and __sk_free. This patch will not counter the socket created in kernel. It's not very useful for userspace to know how many kernel sockets we created. The main reasons for doing this are that: 1. When linux calls the 'do_exit' for process to exit, the functions 'exit_task_namespaces' and 'exit_task_work' will be called sequentially. 'exit_task_namespaces' may have destroyed the _net_ namespace, but 'sock_release' called in 'exit_task_work' may use the _net_ namespace if we counter the socket-inuse in sock_release. 2. socket and sock are in pair. More important, sock holds the _net_ namespace. We counter the socket-inuse in sock, for avoiding holding _net_ namespace again in socket. It's a easy way to maintain the code. Signed-off-by: Martin Zhang <zhangjunweimartin@didichuxing.com> Signed-off-by: Tonghao Zhang <zhangtonghao@didichuxing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19sock: Change the netns_core member name.Tonghao Zhang
Change the member name will make the code more readable. This patch will be used in next patch. Signed-off-by: Martin Zhang <zhangjunweimartin@didichuxing.com> Signed-off-by: Tonghao Zhang <zhangtonghao@didichuxing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19Merge tag 'mac80211-for-davem-2017-12-19' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A few more fixes: * hwsim: - set To-DS bit in some frames missing it - fix sleeping in atomic * nl80211: - doc cleanup - fix locking in an error path * build: - don't append to created certs C files - ship certificate pre-hexdumped ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19Merge remote-tracking branches 'spi/fix/armada', 'spi/fix/atmel', ↵Mark Brown
'spi/fix/doc', 'spi/fix/imx', 'spi/fix/rspi', 'spi/fix/sun4i' and 'spi/fix/xilinx' into spi-linus
2017-12-19spi: atmel: fixed spin_lock usage inside atmel_spi_removeRadu Pirea
The only part of atmel_spi_remove which needs to be atomic is hardware reset. atmel_spi_stop_dma calls dma_terminate_all and this needs interrupts enabled. atmel_spi_release_dma calls dma_release_channel and dma_release_channel locks a mutex inside of spin_lock. So the call of these functions can't be inside a spin_lock. Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Radu Pirea <radu.pirea@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-19cfg80211: ship certificates as hex filesJohannes Berg
Not only does this remove the need for the hexdump code in most normal kernel builds (still there for the extra directory), but it also removes the need to ship binary files, which apparently is somewhat problematic, as Randy reported. While at it, also add the generated files to clean-files. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-19nl80211: Remove obsolete kerneldoc lineJonathan Corbet
Commit ca986ad9bcd3 (nl80211: allow multiple active scheduled scan requests) removed WIPHY_FLAG_SUPPORTS_SCHED_SCAN but left the kerneldoc description in place, leading to this docs-build warning: ./include/net/cfg80211.h:3278: warning: Excess enum value 'WIPHY_FLAG_SUPPORTS_SCHED_SCAN' description in 'wiphy_flags' Remove the line and gain a bit of peace. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-19mac80211_hwsim: Fix a possible sleep-in-atomic bug in hwsim_get_radio_nlJia-Ju Bai
The driver may sleep under a spinlock. The function call path is: hwsim_get_radio_nl (acquire the spinlock) nlmsg_new(GFP_KERNEL) --> may sleep To fix it, GFP_KERNEL is replaced with GFP_ATOMIC. This bug is found by my static analysis tool(DSAC) and checked by my code review. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-19cfg80211: always rewrite generated files from scratchThierry Reding
Currently the certs C code generation appends to the generated files, which is most likely a leftover from commit 715a12334764 ("wireless: don't write C files on failures"). This causes duplicate code in the generated files if the certificates have their timestamps modified between builds and thereby trigger the generation rules. Fixes: 715a12334764 ("wireless: don't write C files on failures") Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-19mac80211_hwsim: enable TODS BIT in null data frameAdiel Aloni
Same as in ieee80211_nullfunc_get, enable the TODS bit, otherwise the nullfunc packet will not be handled in ap rx path. (will be dropped in ieee80211_accept_frame()). Signed-off-by: Adiel Aloni <adiel.aloni@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-19ALSA: usb-audio: Fix the missing ctl name suffix at parsing SUTakashi Iwai
The commit 89b89d121ffc ("ALSA: usb-audio: Add check return value for usb_string()") added the check of the return value from snd_usb_copy_string_desc(), which is correct per se, but it introduced a regression. In the original code, either the "Clock Source", "Playback Source" or "Capture Source" suffix is added after the terminal string, while the commit changed it to add the suffix only when get_term_name() is failing. It ended up with an incorrect ctl name like "PCM" instead of "PCM Capture Source". Also, even the original code has a similar bug: when the ctl name is generated from snd_usb_copy_string_desc() for the given iSelector, it also doesn't put the suffix. This patch addresses these issues: the suffix is added always when no static mapping is found. Also the patch tries to put more comments and cleans up the if/else block for better readability in order to avoid the same pitfall again. Fixes: 89b89d121ffc ("ALSA: usb-audio: Add check return value for usb_string()") Reported-and-tested-by: Mauro Santos <registo.mailling@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-12-19bpf/cgroup: fix a verification error for a CGROUP_DEVICE type progYonghong Song
The tools/testing/selftests/bpf test program test_dev_cgroup fails with the following error when compiled with llvm 6.0. (I did not try with earlier versions.) libbpf: load bpf program failed: Permission denied libbpf: -- BEGIN DUMP LOG --- libbpf: 0: (61) r2 = *(u32 *)(r1 +4) 1: (b7) r0 = 0 2: (55) if r2 != 0x1 goto pc+8 R0=inv0 R1=ctx(id=0,off=0,imm=0) R2=inv1 R10=fp0 3: (69) r2 = *(u16 *)(r1 +0) invalid bpf_context access off=0 size=2 ... The culprit is the following statement in dev_cgroup.c: short type = ctx->access_type & 0xFFFF; This code is typical as the ctx->access_type is assigned as below in kernel/bpf/cgroup.c: struct bpf_cgroup_dev_ctx ctx = { .access_type = (access << 16) | dev_type, .major = major, .minor = minor, }; The compiler converts it to u16 access while the verifier cgroup_dev_is_valid_access rejects any non u32 access. This patch permits the field access_type to be accessible with type u16 and u8 as well. Signed-off-by: Yonghong Song <yhs@fb.com> Tested-by: Roman Gushchin <guro@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-19bpf: make function xdp_do_generic_redirect_map() staticXiongwei Song
The function xdp_do_generic_redirect_map() is only used in this file, so make it static. Clean up sparse warning: net/core/filter.c:2687:5: warning: no previous prototype for 'xdp_do_generic_redirect_map' [-Wmissing-prototypes] Signed-off-by: Xiongwei Song <sxwjean@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-19selftests/bpf: add netdevsim to configJakub Kicinski
BPF offload tests (test_offload.py) will require netdevsim to be built, add it to config. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-19bpf: arm64: fix uninitialized variableAlexei Starovoitov
fix the following issue: arch/arm64/net/bpf_jit_comp.c: In function 'bpf_int_jit_compile': arch/arm64/net/bpf_jit_comp.c:982:18: error: 'image_size' may be used uninitialized in this function [-Werror=maybe-uninitialized] Fixes: db496944fdaa ("bpf: arm64: add JIT support for multi-function programs") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-19bpf: make function skip_callee static and return NULL rather than 0Colin Ian King
Function skip_callee is local to the source and does not need to be in global scope, so make it static. Also return NULL rather than 0. Cleans up two sparse warnings: symbol 'skip_callee' was not declared. Should it be static? Using plain integer as NULL pointer Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-19bpf: fix spelling mistake: "funcation"-> "function"Colin Ian King
Trivial fix to spelling mistake in error message text. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-19bpf: fix broken BPF selftest build on s390Hendrik Brueckner
With 720f228e8d31 ("bpf: fix broken BPF selftest build") the inclusion of arch-specific header files changed. Including the asm/bpf_perf_event.h on s390, correctly includes the s390 specific header file. This header file tries then to include the s390 asm/ptrace.h and the build fails with: cc -Wall -O2 -I../../../include/uapi -I../../../lib -I../../../../include/generated -I../../../include test_verifier.c +/root/git/linux/tools/testing/selftests/bpf/libbpf.a /root/git/linux/tools/testing/selftests/bpf/cgroup_helpers.c -lcap -lelf -o +/root/git/linux/tools/testing/selftests/bpf/test_verifier In file included from ../../../include/uapi/asm/bpf_perf_event.h:4:0, from ../../../include/uapi/linux/bpf_perf_event.h:11, from test_verifier.c:29: ../../../include/uapi/../../arch/s390/include/uapi/asm/bpf_perf_event.h:7:9: error: unknown type name 'user_pt_regs' typedef user_pt_regs bpf_user_pt_regs_t; ^~~~~~~~~~~~ make: *** [../lib.mk:109: /root/git/linux/tools/testing/selftests/bpf/test_verifier] Error 1 This is caused by a recent update to the s390 asm/ptrace.h file that is not (yet) available in the local installation. That means, the s390 asm/ptrace.h must be included from the tools/arch/s390 directory. Because there is no proper framework to deal with asm specific includes in tools/, slightly modify the s390 asm/bpf_perf_event.h to include the local ptrace.h header file. See also discussion on https://marc.info/?l=linux-s390&m=151359424420691&w=2 Please note that this needs to be preserved until tools/ is able to correctly handle asm specific headers. References: https://marc.info/?l=linux-s390&m=151359424420691&w=2 Fixes: 720f228e8d31 ("bpf: fix broken BPF selftest build") Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-18Merge tag 'for-linus-20171218' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD fixes from Richard Weinberger: "This contains the following regression fixes: - fix bitflip handling in brcmnand and gpmi nand drivers - revert a bad device tree binding for spi-nor - fix a copy&paste error in gpio-nand driver - fix a too strict length check in mtd core" * tag 'for-linus-20171218' of git://git.infradead.org/linux-mtd: mtd: Fix mtd_check_oob_ops() mtd: nand: gpio: Fix ALE gpio configuration mtd: nand: brcmnand: Zero bitflip is not an error mtd: nand: gpmi: Fix failure when a erased page has a bitflip at BBM Revert "dt-bindings: mtd: add sst25wf040b and en25s64 to sip-nor list"
2017-12-18block: fix blk_rq_append_bioJens Axboe
Commit caa4b02476e3(blk-map: call blk_queue_bounce from blk_rq_append_bio) moves blk_queue_bounce() into blk_rq_append_bio(), but don't consider the fact that the bounced bio becomes invisible to caller since the parameter type is 'struct bio *'. Make it a pointer to a pointer to a bio, so the caller sees the right bio also after a bounce. Fixes: caa4b02476e3 ("blk-map: call blk_queue_bounce from blk_rq_append_bio") Cc: Christoph Hellwig <hch@lst.de> Reported-by: Michele Ballabio <barra_cuda@katamail.com> (handling failure of blk_rq_append_bio(), only call bio_get() after blk_rq_append_bio() returns OK) Tested-by: Michele Ballabio <barra_cuda@katamail.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-18block: don't let passthrough IO go into .make_request_fn()Ming Lei
Commit a8821f3f3("block: Improvements to bounce-buffer handling") tries to make sure that the bio to .make_request_fn won't exceed BIO_MAX_PAGES, but ignores that passthrough I/O can use blk_queue_bounce() too. Especially, passthrough IO may not be sector-aligned, and the check of 'sectors < bio_sectors(*bio_orig)' inside __blk_queue_bounce() may become true even though the max bvec number doesn't exceed BIO_MAX_PAGES, then cause the bio splitted, and the original passthrough bio is submited to generic_make_request(). This patch fixes this issue by checking if the bio is passthrough IO, and use bio_kmalloc() to allocate the cloned passthrough bio. Cc: NeilBrown <neilb@suse.com> Fixes: a8821f3f3("block: Improvements to bounce-buffer handling") Tested-by: Michele Ballabio <barra_cuda@katamail.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-18cxgb4: Simplify PCIe Completion Timeout settingBjorn Helgaas
Simplify PCIe Completion Timeout setting by using the pcie_capability_clear_and_set_word() interface. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18Merge branch 'erspan-a-couple-fixes'David S. Miller
William Tu says: ==================== net: erspan: a couple fixes Haishuang Yan reports a couple of issues (wrong return value, pskb_may_pull) on erspan V1. Since erspan V2 is in net-next, this series fix the similar issues on v2. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: erspan: reload pointer after pskb_may_pullWilliam Tu
pskb_may_pull() can change skb->data, so we need to re-load pkt_md and ershdr at the right place. Fixes: 94d7d8f29287 ("ip6_gre: add erspan v2 support") Fixes: f551c91de262 ("net: erspan: introduce erspan v2 for ip_gre") Signed-off-by: William Tu <u9012063@gmail.com> Cc: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: erspan: fix wrong return valueWilliam Tu
If pskb_may_pull return failed, return PACKET_REJECT instead of -ENOMEM. Fixes: 94d7d8f29287 ("ip6_gre: add erspan v2 support") Fixes: f551c91de262 ("net: erspan: introduce erspan v2 for ip_gre") Signed-off-by: William Tu <u9012063@gmail.com> Cc: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Acked-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: phy: xgene: disable clk on error pathsAlexey Khoroshilov
There are several error paths in xgene_mdio_probe(), where clk is left undisabled. The patch fixes them. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: phy: marvell: avoid pause mode on SGMII-to-Copper for 88e151xRussell King
Observed on the 88e1512 in SGMII-to-Copper mode, negotiating pause is unreliable. While the pause bits can be set in the advertisment register, they clear shortly after negotiation with a link partner commences irrespective of the cause of the negotiation. While these bits may be correctly conveyed to the link partner on the first negotiation, a subsequent negotiation (eg, due to negotiation restart by the link partner, or reconnection of the cable) will result in the link partner seeing these bits as zero, while the kernel believes that it has advertised pause modes. This leads to the local kernel evaluating (eg) symmetric pause mode, while the remote end evaluates that we have no pause mode capability. Since we can't guarantee the advertisment, disable pause mode support with this PHY when used in SGMII-to-Copper mode. The 88e1510 in RGMII-to-Copper mode appears to behave correctly. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18Merge branch 'sfp-phylink-fixes'David S. Miller
Russell King says: ==================== More SFP/phylink fixes This series fixes a few more bits with sfp/phylink, particularly confusion with the right way to test for the RTNL mutex being held, a change in 2016 to the mdiobus_scan() behaviour that wasn't noticed, and a fix for reading module EEPROMs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18phylink: fix locking assertsRussell King
Use ASSERT_RTNL() rather than WARN_ON(!lockdep_rtnl_is_held()) which stops working when lockdep fires, and we end up with lots of warnings. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18sfp: fix EEPROM reading in the case of non-SFF8472 SFPsRussell King
The EEPROM reading was trying to read from the second EEPROM address if we requested the last byte from the SFF8079 EEPROM, which caused a failure when the second EEPROM is not present. Discovered with a S-RJ01 SFP module. Fix this. Fixes: 73970055450e ("sfp: add SFP module support") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18sfp: fix non-detection of PHYRussell King
The detection of a PHY changed in commit e98a3aabf85f ("mdio_bus: don't return NULL from mdiobus_scan()") which now causes sfp to print an error message. Update for this change. Fixes: 73970055450e ("sfp: add SFP module support") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net/ncsi: Don't take any action on HNCDSC AENSamuel Mendoza-Jonas
The current HNCDSC handler takes the status flag from the AEN packet and will update or change the current channel based on this flag and the current channel status. However the flag from the HNCDSC packet merely represents the host link state. While the state of the host interface is potentially interesting information it should not affect the state of the NCSI link. Indeed the NCSI specification makes no mention of any recommended action related to the host network controller driver state. Update the HNCDSC handler to record the host network driver status but take no other action. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Acked-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18Merge branch 'parisc-4.15-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "There are two important fixes here: - Add PCI quirks to disable built-in a serial AUX and a graphics cards from specific GSP (management board) PCI cards. This fixes boot via serial console on rp3410 and rp3440 machines. - Revert the "Re-enable interrups early" patch which was added to kernel v4.10. It can trigger stack overflows and thus silent data corruption. With this patch reverted we can lower our thread stack back to 16kb again. The other patches are minor cleanups: avoid duplicate includes, indenting fixes, correctly align variable in asm code" * 'parisc-4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Reduce thread stack to 16 kb Revert "parisc: Re-enable interrupts early" parisc: remove duplicate includes parisc: Hide Diva-built-in serial aux and graphics card parisc: Align os_hpmc_size on word boundary parisc: Fix indenting in puts()
2017-12-18net: bridge: fix early call to br_stp_change_bridge_id and plug newlink leaksNikolay Aleksandrov
The early call to br_stp_change_bridge_id in bridge's newlink can cause a memory leak if an error occurs during the newlink because the fdb entries are not cleaned up if a different lladdr was specified, also another minor issue is that it generates fdb notifications with ifindex = 0. Another unrelated memory leak is the bridge sysfs entries which get added on NETDEV_REGISTER event, but are not cleaned up in the newlink error path. To remove this special case the call to br_stp_change_bridge_id is done after netdev register and we cleanup the bridge on changelink error via br_dev_delete to plug all leaks. This patch makes netlink bridge destruction on newlink error the same as dellink and ioctl del which is necessary since at that point we have a fully initialized bridge device. To reproduce the issue: $ ip l add br0 address 00:11:22:33:44:55 type bridge group_fwd_mask 1 RTNETLINK answers: Invalid argument $ rmmod bridge [ 1822.142525] ============================================================================= [ 1822.143640] BUG bridge_fdb_cache (Tainted: G O ): Objects remaining in bridge_fdb_cache on __kmem_cache_shutdown() [ 1822.144821] ----------------------------------------------------------------------------- [ 1822.145990] Disabling lock debugging due to kernel taint [ 1822.146732] INFO: Slab 0x0000000092a844b2 objects=32 used=2 fp=0x00000000fef011b0 flags=0x1ffff8000000100 [ 1822.147700] CPU: 2 PID: 13584 Comm: rmmod Tainted: G B O 4.15.0-rc2+ #87 [ 1822.148578] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 1822.150008] Call Trace: [ 1822.150510] dump_stack+0x78/0xa9 [ 1822.151156] slab_err+0xb1/0xd3 [ 1822.151834] ? __kmalloc+0x1bb/0x1ce [ 1822.152546] __kmem_cache_shutdown+0x151/0x28b [ 1822.153395] shutdown_cache+0x13/0x144 [ 1822.154126] kmem_cache_destroy+0x1c0/0x1fb [ 1822.154669] SyS_delete_module+0x194/0x244 [ 1822.155199] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 1822.155773] entry_SYSCALL_64_fastpath+0x23/0x9a [ 1822.156343] RIP: 0033:0x7f929bd38b17 [ 1822.156859] RSP: 002b:00007ffd160e9a98 EFLAGS: 00000202 ORIG_RAX: 00000000000000b0 [ 1822.157728] RAX: ffffffffffffffda RBX: 00005578316ba090 RCX: 00007f929bd38b17 [ 1822.158422] RDX: 00007f929bd9ec60 RSI: 0000000000000800 RDI: 00005578316ba0f0 [ 1822.159114] RBP: 0000000000000003 R08: 00007f929bff5f20 R09: 00007ffd160e8a11 [ 1822.159808] R10: 00007ffd160e9860 R11: 0000000000000202 R12: 00007ffd160e8a80 [ 1822.160513] R13: 0000000000000000 R14: 0000000000000000 R15: 00005578316ba090 [ 1822.161278] INFO: Object 0x000000007645de29 @offset=0 [ 1822.161666] INFO: Object 0x00000000d5df2ab5 @offset=128 Fixes: 30313a3d5794 ("bridge: Handle IFLA_ADDRESS correctly when creating bridge device") Fixes: 5b8d5429daa0 ("bridge: netlink: register netdevice before executing changelink") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18Merge branch 'phy-meson-gxl-clean-up-and-improvements'David S. Miller
Jerome Brunet says: ==================== net: phy: meson-gxl: clean-up and improvements This patchset adds defines for the control registers and helpers to access the banked registers. The goal being to make it easier to understand what the driver actually does. Then CONFIG_A6 settings is removed since this statement was without effect Finally interrupt support is added, speeding things up a little This series has been tested on the libretech-cc and khadas VIM Changes since v2 [0]: Drop LPA corruption fix which has been merged through net. Apart from this, series remains the same. [0]: https://lkml.kernel.org/r/20171207142715.32578-1-jbrunet@baylibre.com ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: phy: meson-gxl: join the authorsJerome Brunet
Following previous changes, join the other authors of this driver and take the blame with them Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: phy: meson-gxl: add interrupt supportJerome Brunet
Enable interrupt support in meson-gxl PHY driver Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: phy: meson-gxl: leave CONFIG_A6 untouchedJerome Brunet
The PHY performs just as well when left in its default configuration and it makes senses because this poke gets reset just after init. According to the documentation, all registers in the Analog/DSP bank are reset when there is a mode switch from 10BT to 100BT. The bank is also reset on power down and soft reset, so we will never see the value which may have been set by the bootloader. In the end, we have used the default configuration so far and there is no reason to change now. Remove CONFIG_A6 poke to make this clear. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: phy: meson-gxl: use genphy_config_initJerome Brunet
Use the generic init function to populate some of the phydev structure fields Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: phy: meson-gxl: add read and write helpers for banked registersJerome Brunet
Add read and write helpers to manipulate banked registers on this PHY This helps clarify the settings applied to these registers and what the driver actually does Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: phy: meson-gxl: define control registersJerome Brunet
Define registers and bits in meson-gxl PHY driver to make a bit more human friendly. No functional change. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: phy: meson-gxl: check phy_write return valueJerome Brunet
Always check phy_write return values. Better to be safe than sorry Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18sctp: add SCTP_CID_RECONF conversion in sctp_cnameXin Long
Whenever a new type of chunk is added, the corresp conversion in sctp_cname should be added. Otherwise, in some places, pr_debug will print it as "unknown chunk". Fixes: cc16f00f6529 ("sctp: add support for generating stream reconf ssn reset request chunk") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo R. Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18sctp: fix the issue that a __u16 variable may overflow in sctp_ulpq_renegeXin Long
Now when reneging events in sctp_ulpq_renege(), the variable freed could be increased by a __u16 value twice while freed is of __u16 type. It means freed may overflow at the second addition. This patch is to fix it by using __u32 type for 'freed', while at it, also to remove 'if (chunk)' check, as all renege commands are generated in sctp_eat_data and it can't be NULL. Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: qcom/emac: Change the order of mac up and sgmii openHemanth Puranik
This patch fixes the order of mac_up and sgmii_open for the reasons noted below: - If open takes more time(if the SGMII block is not responding or if we want to do some delay based task) in this situation we will hit NETDEV watchdog - The main reason : We should signal to upper layers that we are ready to receive packets "only" when the entire path is initialized not the other way around, this is followed in the reset path where we do mac_down, sgmii_reset and mac_up. This also makes the driver uniform across the reset and open paths. - In the future there may be need for delay based tasks to be done in sgmii open which will result in NETDEV watchdog - As per the documentation the order of init should be sgmii, mac, rings and DMA Signed-off-by: Hemanth Puranik <hpuranik@codeaurora.org> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: phy: marvell: Limit 88m1101 autoneg errata to 88E1145 as well.Zhao Qiang
88E1145 also need this autoneg errata. Fixes: f2899788353c ("net: phy: marvell: Limit errata to 88m1101") Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-20 20:29:33 +0000