summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-08-27wifi: iwlwifi: mvm: allow ESR when we the ROC expiresEmmanuel Grumbach
We forgot to release the ROC reason for ESR prevention when the remain on channel expires. Add this. Fixes: a1efeb823084 ("wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240825191257.8f8765f359cc.I16fcd6198072d422ff36dce68070aafaf011f4c1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: avoid NULL pointer dereferenceMiri Korenblit
iwl_mvm_tx_skb_sta() and iwl_mvm_tx_mpdu() verify that the mvmvsta pointer is not NULL. It retrieves this pointer using iwl_mvm_sta_from_mac80211, which is dereferencing the ieee80211_sta pointer. If sta is NULL, iwl_mvm_sta_from_mac80211 will dereference a NULL pointer. Fix this by checking the sta pointer before retrieving the mvmsta from it. If sta is not NULL, then mvmsta isn't either. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20240825191257.880921ce23b7.I340052d70ab6d3410724ce955eb00da10e08188f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: mac80211: export ieee80211_purge_tx_queue() for driversPing-Ke Shih
Drivers need to purge TX SKB when stopping. Using skb_queue_purge() can't report TX status to mac80211, causing ieee80211_free_ack_frame() warns "Have pending ack frames!". Export ieee80211_purge_tx_queue() for drivers to not have to reimplement it. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240822014255.10211-1-pkshih@realtek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: rfkill: Correct parameter type for rfkill_set_hw_state_reason()Zijun Hu
Change type of parameter @reason to enum rfkill_hard_block_reasons for API rfkill_set_hw_state_reason() according to its comments, and all kernel callers have invoked the API with enum type actually. Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://patch.msgid.link/20240811-rfkill_fix-v2-1-9050760336f4@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: mac80211: remove redundant unlikely() around IS_ERR()Zhang Changzhong
IS_ERR() already calls unlikely(), so unlikely() is redundant here. Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://patch.msgid.link/1724488003-45388-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27net: rfkill: gpio: Do not load on Lenovo Yoga Tab 3 Pro YT3-X90Hans de Goede
The Lenovo Yoga Tab 3 Pro YT3-X90 has a non functional "BCM4752" ACPI device, which uses GPIO resources which are actually necessary / used for the sound (codec, speaker amplifier) on the Lenovo Yoga Tab 3 Pro. If the rfkill-gpio driver loads before the sound drivers do the sound drivers fail to load because the GPIOs are already claimed. Add a DMI based deny list with the Lenovo Yoga Tab 3 Pro on there and make rfkill_gpio_probe() exit with -ENODEV for devices on the DMI based deny list. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patch.msgid.link/20240825131916.6388-1-hdegoede@redhat.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: allow only CN mcc from WRDDAnjaneyulu
Block other mcc expect CN from WRDD ACPI. Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240808232017.fe6ea7aa4b39.I86004687a2963fe26f990770aca103e2f5cb1628@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: drop wrong STA selection in TXJohannes Berg
This shouldn't happen at all, since in station mode all MMPDUs go through the TXQ for the STA, and not this function. There may or may not be a race in mac80211 through which this might happen for some frames while a station is being added, but in that case we can also just drop the frame and pretend the STA didn't exist yet. Also, the code is simply wrong since it uses deflink, and it's not easy to fix it since the mvmvif->ap_sta pointer cannot be used without the mutex, and perhaps the right link might not even be known. Just drop the frame at that point instead of trying to fix it up. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240808232017.45ad105dc7fe.I6d45c82e5758395d9afb8854057ded03c7dc81d7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: bump FW API to 93 for BZ/SC devicesMiri Korenblit
Start supporting API version 93 for new devices. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20240808232017.5c9846f4c2c3.I6c825bc93aa23db302f24db5617f9b9b06042ec8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: cleanup iwl_mvm_get_wd_timeoutMiri Korenblit
This used to extract the timeout from the debug TLV (FW_DBG_TRIGGER_TXQ_TIMERS), which is not in use. Cleanup iwl_mvm_get_wd_timeout to not consider the debug TLV. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20240808232017.7a6944bc2e38.I532b4b5487c6be9203ff4db9742d7cc5b148d502@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: use default command queue watchdog timeoutMiri Korenblit
We used to have the opmode configuring it to the trans according to the debug tlv value (FW_DBG_TRIGGER_TXQ_TIMERS). But this debug is not used, so trans can just have the default value hardcoded. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240808232017.87af3f063025.I2222981ead13f6a917f2d4b116c5b94200dc9e51@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: handle the new EML OMN failure notificationEmmanuel Grumbach
Take the proper action upon EML OMN frame failure. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240825090005.01ff45fa69db.I9f2d3ea851050f6031ac07bbe69eb38000fd5683@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: Stop processing MCC update if there was no changeIlan Peer
When processing a MCC update notification from the firmware, if the firmware indicates that the regulatory configuration didn't change, abort the flow and do not notify higher layers. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240808232017.60dd273d00e0.I985b3bc61ca4a6cac7c1d1365b5c0afba04f3031@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: add API for EML OMN frame failureEmmanuel Grumbach
When the firmware fails to send EML OMN frames, it notifies the host and the host need to take proper action. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240808232017.0c6bc216ef8c.Ida85d2062734a569e1af35f47d14cc5bb4bf893e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: exit EMLSR if both links are missing beaconsEmmanuel Grumbach
If both links are missing 5 beacons, we need to exit EMLSR, if only one link misses beacons, we need to wait until 11 beacons are missed. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240808232017.b7785943a4fe.I70a459c5e7db85f398d5795ba83bb15f65d6bf9d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: handle the new missed beacons notificationEmmanuel Grumbach
Use the same handler for both types and just convert the old version to the new. Drop the unused fields from the old one and fake the new fields. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240808232017.a64ffc998569.I7d181052b1a69c331d07263f20c1e00cbc0bc891@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: add the new API for the missed beacons notificationEmmanuel Grumbach
Note that the new API does not have the same notification ID as the previous notification: the new notification belongs to the group 0x3. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240808232017.4ea52360b32e.Ibc25dcabd8aeadda906549482a6c77bc42fb55bb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: rename iwl_missed_beacons_notifEmmanuel Grumbach
A new version is coming up. Rename the current struct to include the current version. s/iwl_missed_beacons_notif/iwl_missed_beacons_notif_v4 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240808232017.b5c3a83a05ef.I698611582b5ca8395f42a535c51f7230307e2c6f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: Offload RLC/SMPS functionality to firmwareDaniel Gabay
Currently, the driver handles SMPS decisions by tracking AP capabilities, BT coexistence changes, sending necessary SMPS frames to the AP, and updating firmware with RX chain info using the RLC_CONFIG_CMD. Starting with version 3 of the RLC_CONFIG_CMD, the firmware takes over this responsibility. It now tracks SMPS, sends frames, and configures the RLC. In this patch: 1. Stop sending RLC_CONFIG_CMD when firmware supports RLC offload (version 3), as rlc.rx_chain_info is not needed by firmware, and no other field in the cmd is used. 2. Prevent the driver from forwarding any SMPS requests to mac80211, i.e., the driver should not transmit SMPS frames to the AP as firmware handles that. 3. Set NL80211_FEATURE_DYNAMIC_SMPS and NL80211_FEATURE_STATIC_SMPS conditionally based on RLC version. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240808232017.45da23be1f65.I0d46db82dd990a82e8a66876fe2f5310bc9513be@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: mac80211: fix the comeback long retry timesEmmanuel Grumbach
When we had a comeback, we will never use the default timeout values again because comeback is never cleared. Clear comeback if we send another association request which will allow to start a default timer after Tx status. The problem was seen with iwlwifi where the tx_status on the association request is handled before the association response frame (which is the usual case). 1) Tx assoc request 1/3 2) Rx assoc response (comeback, timeout = 1 second) 3) wait 1 second 4) Tx assoc request 2/3 5) Set timer to IEEE80211_ASSOC_TIMEOUT_LONG = 500ms (1 second after round_up) 6) tx_status on frame sent in 4) is ignored because comeback is still true 7) AP does not reply with assoc response 8) wait 1s <= This is where the bug is felt 9) Tx assoc request 3/3 With this fix, in step 6 we will reset the timer to IEEE80211_ASSOC_TIMEOUT_SHORT = 100ms and we will wait only 100ms in step 8. Fixes: b133fdf07db8 ("wifi: mac80211: Skip association timeout update after comeback rejection") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20240808085916.23519-1-emmanuel.grumbach@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: cfg80211: fix bug of mapping AF3x to incorrect User Priorityhhorace
According to RFC8325 4.3, Multimedia Streaming: AF31(011010, 26), AF32(011100, 28), AF33(011110, 30) maps to User Priority = 4 and AC_VI (Video). However, the original code remain the default three Most Significant Bits (MSBs) of the DSCP, which makes AF3x map to User Priority = 3 and AC_BE (Best Effort). Fixes: 6fdb8b8781d5 ("wifi: cfg80211: Update the default DSCP-to-UP mapping") Signed-off-by: hhorace <hhoracehsu@gmail.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20240807082205.1369-1-hhoracehsu@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: mac80211: Add non-atomic station iteratorRory Little
Drivers may at times want to iterate their stations with a function which requires some non-atomic operations. ieee80211_iterate_stations_mtx() introduces an API to iterate stations while holding that wiphy's mutex. This allows the iterating function to do non-atomic operations safely. Signed-off-by: Rory Little <rory@candelatech.com> Link: https://patch.msgid.link/20240806004024.2014080-2-rory@candelatech.com [unify internal list iteration functions] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27staging: rtl8192e: Constify struct lib80211_crypto_opsChristophe JAILLET
Now that functions in lib80211 handle "const struct lib80211_crypto_ops", some structure can be constified as well. Constifying these structures moves some data to a read-only section, so increase overall security. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/dfda6343781ae3d50cd2ec7bbdcf76a489b6922a.1722839425.git.christophe.jaillet@wanadoo.fr Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: lib80211: Constify struct lib80211_crypto_opsChristophe JAILLET
Now that functions in lib80211 handle "const struct lib80211_crypto_ops", some structure can be constified as well. Constifying these structures moves some data to a read-only section, so increase overall security. Before: text data bss dec hex filename 7273 604 16 7893 1ed5 net/wireless/lib80211.o After: text data bss dec hex filename 7429 444 16 7889 1ed1 net/wireless/lib80211.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/0cc3741c15f2c502cc85bddda9d6582b5977c8f9.1722839425.git.christophe.jaillet@wanadoo.fr Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: lib80211: Handle const struct lib80211_crypto_ops in lib80211Christophe JAILLET
lib80211_register_crypto_ops() and lib80211_unregister_crypto_ops() don't modify their "struct lib80211_crypto_ops *ops" argument. So, it can be declared as const. Doing so, some adjustments are needed to also constify some date in "struct lib80211_crypt_data", "struct lib80211_crypto_alg" and the return value of lib80211_get_crypto_ops(). Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/c74085e02f33a11327582b19c9f51c3236e85ae2.1722839425.git.christophe.jaillet@wanadoo.fr Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: add and improve EMLSR debug infoMiri Korenblit
Add prints of the per-link MPDU counters, and change the other MPDU counters related prints to use DL_INFO, which is already used for all EMLSR tests anyway, instead of DL_STATS which pollutes the logs with all the RX signal info. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Daniel Gabay <daniel.gabay@intel.com> Link: https://patch.msgid.link/20240729201718.02bd85837c87.I85480c9c4fab0f7a574dd69cbeafd82674146921@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: Enable channel puncturing for US/CAN from biosSomashekhar(Som)
Add support for enabling channel puncturing for US/CAN based on BIOS configuration through UEFI Signed-off-by: Somashekhar(Som) <somashekhar.puttagangaiah@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.828f3ecf5118.I5561ab8c7cd48ad4e5d6daf21b037bf88c619a4a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: add firmware debug points for EMLSR entry / exitEmmanuel Grumbach
This will help to dump the firmware logs at the right spot if needed. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.3a91e89e32f8.Ieb28d7756c47dee52c912a71abe82fa0b08b19da@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwiif: mvm: handle the new BT notifEmmanuel Grumbach
Iterate all the links and check if any action must be taken. The new notification impacts only the esr decision. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.00cfc07879c6.I8491483fda3b5888ea6ffa10fbd17807e443f943@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: start to support the new BT profile notificationEmmanuel Grumbach
We have a new notification the BT profile. It contains almost nothing, only the wifi loss information. Copy this into mvm. We still need to iterate over the vifs / links to use this data. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.637499f3a85a.I8bf654cf5d8aa038100273876c936845ecc338f7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: s/iwl_bt_coex_profile_notif/iwl_bt_coex_prof_old_notifEmmanuel Grumbach
The iwl_bt_coex_profile_notif is now being obsoleted. It'll be replaced by a new notification coming with a non-legacy group. Rename it to avoid confusion. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.dc29fd0d7817.I5881fce86ec8b76ae98d2948265434b8e7d860c1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: increase the time between ranging measurementsAvraham Stern
The algo running in fw may take a little longer than 5 milliseconds, (e.g. measurement on 80MHz while associated). Increase the minimum time between measurements to 7 milliseconds. Fixes: 830aa3e7d1ca ("iwlwifi: mvm: add support for range request command version 13") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.d3f3c26e00d9.I09e951290e8a3d73f147b88166fd9a678d1d69ed@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: set the cipher for secured NDP rangingAvraham Stern
The cipher pointer is not set, but is derefereced trying to set its content, which leads to a NULL pointer dereference. Fix it by pointing to the cipher parameter before dereferencing. Fixes: 626be4bf99f6 ("wifi: iwlwifi: mvm: modify iwl_mvm_ftm_set_secured_ranging() parameters") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.24e83369f136.I80501ddcb82920561f450d00020d860e7a3f90c6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: Fix a race in scan abort flowIlan Peer
When the upper layer requests to cancel an ongoing scan, a race is possible in which by the time the driver starts to handle the upper layers scan cancel flow, the FW already completed handling the scan request and the driver received the scan complete notification but still did not handle the notification. In such a case the FW will simply ignore the scan abort request coming from the driver, no notification would arrive from the FW and the entire abort flow would be considered a failure. To better handle this, check the status code returned by the FW for the scan abort command. In case the status indicates that no scan was aborted, complete the scan abort flow with success, i.e., the scan was aborted, as the flow is expected to consume the scan complete notification. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240825085558.483989d3baef.I3340556a222388504c6330b333360bf77d10f9e2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: set ul_mu_data_disable when neededEmmanuel Grumbach
The firmware needs to know what we had in the HE CAP, propagate that setting to the firmware through the LINK command. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.fef270d2995b.I328237837df30e1cb98764987eaaf8e8993e058c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mei: add support for SAP version 4Avraham Stern
SAP version 4 uses larger Host to MEI notification queue. Since it is unknown which SAP version is used by the CSME firmware when the driver loads, try version 4 first. In case the CSME firmware uses version 3, the memory allocation will fail. In this case the driver will try again to allocate the memory for version 3. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.8372e040282f.Ia0085784e08a35159c9293f986c3d2774038f4c4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: config: label 'gl' devices as discreteJohannes Berg
The 'gl' devices are in the bz family, but they're not, integrated, so should have their own trans config struct. Fix that, also necessitating the removal of LTR config, and while at it remove 0x2727 and 0x272D IDs that were only used for test chips. Fixes: c30a2a64788b ("wifi: iwlwifi: add a new PCI device ID for BZ device")ticket=none Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.95aed0620080.Ib9129512c95aa57acc9876bdff8b99dd41e1562c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: pcie: print function scratch before writingJohannes Berg
We may want to know the value of this register for certain debug scenarios before we overwrite it, it indicates which parts of the chip have recently been reset. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.737e5f8bb8df.Ia3f3637ac4a0fb4b35ffd652f92eb75de652ee12@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: use correct key iterationJohannes Berg
In the cases changed here, key iteration isn't done from an RCU critical section, but rather using the wiphy lock as protection. Therefore, just use ieee80211_iter_keys(). The link switch case can therefore also use sync commands. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.69a2d18580c1.I2148e04d4b467d0b100beac8f7e449bfaaf775a5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: remove MVM prefix from FW macrosMiri Korenblit
These are not mvm specific. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20240729201718.939b32f84f46.I293957bf172680871eba24448d9d1870e49100b6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: add support for new REDUCE_TXPOWER_CMD versionsEmmanuel Grumbach
New API versions are coming up for this command. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.7ec1527be98c.I52dede6532bc61041c441caee5273734f14a1d78@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: prepare the introduction of V9 of REDUCED_TX_POWEREmmanuel Grumbach
* Rename iwl_dev_tx_power_cmd to iwl_dev_tx_power_cmd_v3_v8 * struct iwl_dev_tx_power_common needs to be packed. It was always the case, but now that its size is not a multiple of 4, it becomes meaningful. * Move per_band data out of the common structure since it won't be present in the new versions of the command. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.8da29a66984f.I922bdef4740d990f98cb452e858c4157bbc491c5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: mac80211: don't use rate mask for offchannel TX eitherPing-Ke Shih
Like the commit ab9177d83c04 ("wifi: mac80211: don't use rate mask for scanning"), ignore incorrect settings to avoid no supported rate warning reported by syzbot. The syzbot did bisect and found cause is commit 9df66d5b9f45 ("cfg80211: fix default HE tx bitrate mask in 2G band"), which however corrects bitmask of HE MCS and recognizes correctly settings of empty legacy rate plus HE MCS rate instead of returning -EINVAL. As suggestions [1], follow the change of SCAN TX to consider this case of offchannel TX as well. [1] https://lore.kernel.org/linux-wireless/6ab2dc9c3afe753ca6fdcdd1421e7a1f47e87b84.camel@sipsolutions.net/T/#m2ac2a6d2be06a37c9c47a3d8a44b4f647ed4f024 Reported-by: syzbot+8dd98a9e98ee28dc484a@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-wireless/000000000000fdef8706191a3f7b@google.com/ Fixes: 9df66d5b9f45 ("cfg80211: fix default HE tx bitrate mask in 2G band") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240729074816.20323-1-pkshih@realtek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: mac80211: refactor block ack management codeDmitry Antipov
Introduce 'ieee80211_mgmt_ba()' to avoid code duplication between 'ieee80211_send_addba_resp()', 'ieee80211_send_addba_request()', and 'ieee80211_send_delba()', ensure that all related addresses are '__aligned(2)', and prefer convenient 'ether_addr_copy()' over generic 'memcpy()'. No functional changes expected. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Link: https://patch.msgid.link/20240725090925.6022-1-dmantipov@yandex.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: mac80211_hwsim: correct MODULE_PARM_DESC of multi_radioZong-Zhe Yang
Correct the name field in multi_radio's MODULE_PARM_DESC. Fixes: d2601e34a102 ("wifi: mac80211_hwsim: add support for multi-radio wiphy") Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Acked-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/20240712074938.26437-1-kevin_yang@realtek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: clear trans->state earlier upon errorEmmanuel Grumbach
When the firmware crashes, we first told the op_mode and only then, changed the transport's state. This is a problem if the op_mode's nic_error() handler needs to send a host command: it'll see that the transport's state still reflects that the firmware is alive. Today, this has no consequences since we set the STATUS_FW_ERROR bit and that will prevent sending host commands. iwl_fw_dbg_stop_restart_recording looks at this bit to know not to send a host command for example. To fix the hibernation, we needed to reset the firmware without having an error and checking STATUS_FW_ERROR to see whether the firmware is alive will no longer hold, so this change is necessary as well. Change the flow a bit. Change trans->state before calling the op_mode's nic_error() method and check trans->state instead of STATUS_FW_ERROR. This will keep the current behavior of iwl_fw_dbg_stop_restart_recording upon firmware error, and it'll allow us to call iwl_fw_dbg_stop_restart_recording safely even if STATUS_FW_ERROR is clear, but yet, the firmware is not alive. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240825191257.9d7427fbdfd7.Ia056ca57029a382c921d6f7b6a6b28fc480f2f22@changeid [I missed this was a dependency for the hibernation fix, changed the commit message a bit accordingly] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: wfx: repair open network AP modeAlexander Sverdlin
RSN IE missing in beacon is normal in open networks. Avoid returning -EINVAL in this case. Steps to reproduce: $ cat /etc/wpa_supplicant.conf network={ ssid="testNet" mode=2 key_mgmt=NONE } $ wpa_supplicant -iwlan0 -c /etc/wpa_supplicant.conf nl80211: Beacon set failed: -22 (Invalid argument) Failed to set beacon parameters Interface initialization failed wlan0: interface state UNINITIALIZED->DISABLED wlan0: AP-DISABLED wlan0: Unable to setup interface. Failed to initialize AP interface After the change: $ wpa_supplicant -iwlan0 -c /etc/wpa_supplicant.conf Successfully initialized wpa_supplicant wlan0: interface state UNINITIALIZED->ENABLED wlan0: AP-ENABLED Cc: stable@vger.kernel.org Fixes: fe0a7776d4d1 ("wifi: wfx: fix possible NULL pointer dereference in wfx_set_mfp_ap()") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240823131521.3309073-1-alexander.sverdlin@siemens.com
2024-08-27USB: serial: option: add MeiG Smart SRM825LZHANG Yuntian
Add support for MeiG Smart SRM825L which is based on Qualcomm 315 chip. T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2dee ProdID=4d22 Rev= 4.14 S: Manufacturer=MEIG S: Product=LTE-A Module S: SerialNumber=6f345e48 C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: ZHANG Yuntian <yt@radxa.com> Link: https://lore.kernel.org/0041DFA5200EFB1B+20240803074619.563116-1-yt@radxa.com/ Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-08-27Merge branch 'xfrm: speed up policy insertions'Steffen Klassert
Florian Westphal says: ==================== Policy insertions do not scale well, due to both a lienar list walk to find the insertion spot and another list walk to set the 'pos' value (a tie-breaker to detect which policy is older when there is ambiguity as to which one should be matched). First patch gets rid of the second list walk on insert. Rest of the patches get rid of the insertion walk. This list walk was only needed because when I moved the policy db implementation to rbtree I retained the old insertion method for the sake of XFRM_MIGRATE. Switching that to tree-based lookup avoids the need for the full list search. After this, insertion of a policy is largely independent of the number of pre-existing policies as long as they do not share the same source/ destination networks. Note that this is compile tested only as I did not find any tests for XFRM_MIGRATE. ==================== Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2024-08-27Merge tag 'vfs-6.11-rc6.fixes' of ↵Linus Torvalds
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs Pull vfs fixes from Christian Brauner: "VFS: - Ensure that backing files uses file->f_ops->splice_write() for splice netfs: - Revert the removal of PG_private_2 from netfs_release_folio() as cephfs still relies on this - When AS_RELEASE_ALWAYS is set on a mapping the folio needs to always be invalidated during truncation - Fix losing untruncated data in a folio by making letting netfs_release_folio() return false if the folio is dirty - Fix trimming of streaming-write folios in netfs_inval_folio() - Reset iterator before retrying a short read - Fix interaction of streaming writes with zero-point tracker afs: - During truncation afs currently calls truncate_setsize() which sets i_size, expands the pagecache and truncates it. The first two operations aren't needed because they will have already been done. So call truncate_pagecache() instead and skip the redundant parts overlayfs: - Fix checking of the number of allowed lower layers so 500 layers can actually be used instead of just 499 - Add missing '\n' to pr_err() output - Pass string to ovl_parse_layer() and thus allow it to be used for Opt_lowerdir as well pidfd: - Revert blocking the creation of pidfds for kthread as apparently userspace relies on this. Specifically, it breaks systemd during shutdown romfs: - Fix romfs_read_folio() to use the correct offset with folio_zero_tail()" * tag 'vfs-6.11-rc6.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: netfs: Fix interaction of streaming writes with zero-point tracker netfs: Fix missing iterator reset on retry of short read netfs: Fix trimming of streaming-write folios in netfs_inval_folio() netfs: Fix netfs_release_folio() to say no if folio dirty afs: Fix post-setattr file edit to do truncation correctly mm: Fix missing folio invalidation calls during truncation ovl: ovl_parse_param_lowerdir: Add missed '\n' for pr_err ovl: fix wrong lowerdir number check for parameter Opt_lowerdir ovl: pass string to ovl_parse_layer() backing-file: convert to using fops->splice_write Revert "pidfd: prevent creation of pidfds for kthreads" romfs: fix romfs_read_folio() netfs, ceph: Partially revert "netfs: Replace PG_fscache by setting folio->private and marking dirty"
generated by cgit (git 2.34.1) at 2025-09-17 02:59:13 +0000