| Age | Commit message (Collapse) | Author |
|---|
|
Create a sentinal value for "invalid device".
This is needed for removing devices that have stripes on them (force
removing, without evacuating); we need a sentinal value for the stripe
pointers to the device being removed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Commit 6b7c5b947c67 ("net: Add be2net driver.") declared be_pci_fnum_get()
and be_cmd_reset() but never implemented. And commit 9fa465c0ce0d ("be2net:
remove code duplication relating to Lancer reset sequence") removed
lancer_test_and_set_rdy_state() but leave declaration.
Commit 76a9e08e33ce ("be2net: cleanup wake-on-lan code") left behind
be_is_wol_supported() declaration.
Commit baaa08d148ac ("be2net: do not call be_set/get_fw_log_level() on
Skyhawk-R") removed be_get_fw_log_level() but leave declaration.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240902113238.557515-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is no caller and implementation in tree.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240902112904.556577-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dev_err_probe()"
This reverts commit bf4d87f884fe8a4b6b61fe4d0e05f293d08df61c because it
introduced dev_err_probe() in non-probe path, which is not desired.
In general, calling dev_err_probe() after successful probe in case of
handling -EPROBE_DEFER error, will set deferred status on the device
already probed. This is however not a problem here now, because
dev_err_probe() in affected places is used for handling errors from
request_firmware(), which does not return -EPROBE_DEFER. Still usage of
dev_err_probe() in such case is not correct, because request_firmware()
could once return -EPROBE_DEFER.
Fixes: bf4d87f884fe ("net: alacritech: Switch to use dev_err_probe()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240902163610.17028-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This update allows listing default firewalld ruleset on Fedora 40 via
tools/net/ynl/cli.py --spec \
Documentation/netlink/specs/nftables.yaml --dump getrule
Default ruleset uses fib, reject and objref expressions which were
missing.
Other missing expressions can be added later.
Improve decoding while at it:
- add bitwise, ct and lookup attributes
- wire up the quota expression
- translate raw verdict codes to a human reable name, e.g.
'code': 4294967293 becomes 'code': 'jump'.
v2: forgot fib addrtype in enum list (Donald Hunter)
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20240902214112.2549-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: MIB counters for MPJ TX + misc improvements
Recently, a few issues have been discovered around the creation of
additional subflows. Without these counters, it was difficult to point
out the reason why some subflows were not created as expected.
In patch 3, all error paths from __mptcp_subflow_connect() are covered,
except the one related to the 'fully established mode', because it can
only happen with the userspace PM, which will propagate the error to the
userspace in this case (ENOTCONN).
These new counters are also verified in the MPTCP Join selftest in patch
6.
While at it, a few other patches are improving the MPTCP path-manager
code ...
- Patch 1: 'flush' related helpers are renamed to avoid confusions
- Patch 2: directly pass known ID and flags to create a new subflow,
i/o getting them later by iterating over all endpoints again
... and the MPJoin selftests:
- Patch 4: reduce the number of positional parameters
- Patch 5: only one line for the 'join' checks, instead of 3
- Patch 7: more explicit check names, instead of sometimes too cryptic
ones: rtx, ptx, ftx, ctx, fclzrx, sum
- Patch 8: specify client/server instead of 'invert' for some checks
not suggesting one specific direction
- Patch 9: mute errors of mptcp_connect when ran in the background
- Patch 10: simplify checksum_tests by using a for-loop
- Patch 11: remove 'define' re-definitions
====================
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-0-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'MPTCP_PM_NAME' is defined in 'linux/mptcp_pm.h', included in
'linux/mptcp.h', no need to re-define it.
'MPTCP_PM_EVENTS' is not defined in 'linux/mptcp.h', but
'MPTCP_PM_EV_GRP_NAME' is, with the same value. We can then use the
latter, and drop the other one.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-11-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The four checksum tests are similar, only one line is different. So
a for-loop can be used to simplify these tests.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-10-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test is supposed to be killed before the end, which will likely
cause "Connection reset by peer" errors. It is confusing, especially
because in case of real transfer errors, the test will not be marked as
failed. But that's OK, there are many other tests checking that.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-9-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of displaying 'invert' when looking at some events like MP_FAIL,
MP_FASTCLOSE, MP_RESET, RM_ADDR, which is a bit vague because they are
not traditionnaly sent from one side, the host being checked is now
printed.
For the ADD_ADDR, only display the host when it is the client sending
it, which is more unusual.
Also before, the 'invert' message was printed after a few checks, but it
was not clear which ones exactly.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-8-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before, the check names had to be very short. It is no longer the case
now that these checks are printed on a dedicated line.
Then, it looks better to have more explicit names.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-7-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A few new MPJoinSynTx MIB counters have been added in a previous commit.
They are being validated here in mptcp_join.sh selftest, each time the
number of received MPJ are checked.
Most of the time, the number of sent SYN+MPJ is the same as the received
ones. But sometimes, there are more, because there are dropped, or there
are errors.
While at it, the "no MPC reuse with single endpoint" subtest has been
modified to force a bind() error.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-6-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Most tests are checking if the expected number of SYN/SYN+ACK/ACK JOINs
have been received, each of them on one line.
More Join related tests are going to be checked soon, no need to add 5
new lines per test in case of success, just one is enough. In case of
issue, the errors will still be reported like before.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-5-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
chk_join_nr() currently takes 9 positional parameters, 6 of them are
optional. It makes it hard to read:
chk_join_nr 1 1 1 1 0 1 1 0 4
Naming these vars helps to make it easier to read:
join_csum_ns1=1 join_csum_ns2=0 \
join_fail_nr=1 join_rst_nr=1 join_infi_nr=0 \
join_corrupted_pkts=4 \
chk_join_nr 1 1 1
It will then be easier to add new optional parameters.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-4-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recently, a few issues have been discovered around the creation of
additional subflows. Without these counters, it was difficult to point
out the reason why some subflows were not created as expected.
These counters should have been added earlier, because there is no other
simple ways to extract such information from the kernel, and understand
why subflows have not been created.
While at it, some pr_debug() have been added, just in case the errno
needs to be printed.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/509
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-3-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__mptcp_subflow_connect() is currently called from the path-managers,
which have all the required information to create subflows. No need to
call the PM again to re-iterate over the list of entries with RCU lock
to get more info.
Instead, it is possible to pass a mptcp_pm_addr_entry structure, instead
of a mptcp_addr_info one. The former contains the ifindex and the flags
that are required when creating the new subflow.
This is a partial revert of commit ee285257a9c1 ("mptcp: drop flags and
ifindex arguments").
While at it, the local ID can also be set if it is known and 0, to avoid
having to set it in the 'rebuild_header' hook, which will cause a new
iteration of the endpoint entries.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-2-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename all the helpers specific to the flushing operations to make it
clear that the intention is to flush all created subflows, and remove
all announced addresses, not just a specific selection.
That way, it is easier to understand why the id_avail_bitmap and
local_addr_used are reset at the end.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-1-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Gal Pressman says:
====================
RX software timestamp for all
All devices support SOF_TIMESTAMPING_RX_SOFTWARE by virtue of
net_timestamp_check() being called in the device independent code.
Following Willem's suggestion [1], make it so drivers do not have to
handle SOF_TIMESTAMPING_RX_SOFTWARE and SOF_TIMESTAMPING_SOFTWARE, nor
setting of the PHC index to -1.
All drivers will now report RX software timestamp as supported.
The series is limited to 15 patches, I will submit other drivers in
subsequent submissions.
[1] https://lore.kernel.org/netdev/661550e348224_23a2b2294f7@willemb.c.googlers.com.notmuch/
v1: https://lore.kernel.org/20240829144253.122215-1-gal@nvidia.com
====================
Link: https://patch.msgid.link/20240901112803.212753-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Marcin Wojtas <marcin.s.wojtas@gmail.com>
Link: https://patch.msgid.link/20240901112803.212753-16-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/20240901112803.212753-15-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20240901112803.212753-14-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20240901112803.212753-13-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20240901112803.212753-12-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20240901112803.212753-11-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20240901112803.212753-10-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20240901112803.212753-9-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://patch.msgid.link/20240901112803.212753-8-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20240901112803.212753-7-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://patch.msgid.link/20240901112803.212753-6-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20240901112803.212753-5-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20240901112803.212753-4-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20240901112803.212753-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All devices support SOF_TIMESTAMPING_RX_SOFTWARE by virtue of
net_timestamp_check() being called in the device independent code.
Move the responsibility of reporting SOF_TIMESTAMPING_RX_SOFTWARE and
SOF_TIMESTAMPING_SOFTWARE, and setting PHC index to -1 to the core.
Device drivers no longer need to use them.
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Link: https://lore.kernel.org/netdev/661550e348224_23a2b2294f7@willemb.c.googlers.com.notmuch/
Co-developed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240901112803.212753-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If we trigger the bus rescan from sysfs, we'll try to lock the PCI rescan
mutex recursively and deadlock - the platform device will be populated and
probed on the same thread that handles the sysfs write.
Add a workqueue to the pwrctl code on which we schedule the rescan for
controlled PCI devices. While at it: add a new interface for initializing
the pwrctl context where we'd now assign the parent device address and
initialize the workqueue.
Link: https://lore.kernel.org/r/20240823093323.33450-3-brgl@bgdev.pl
Fixes: 4565d2652a37 ("PCI/pwrctl: Add PCI power control core code")
Reported-by: Konrad Dybcio <konradybcio@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
of_platform_depopulate() doesn't play nicely with reused OF nodes - it
ignores the ones that are not marked explicitly as populated and it may
happen that the PCI device goes away before the platform device in which
case the PCI core clears the OF_POPULATED bit.
Unconditionally unregister the platform devices for child nodes when
stopping the PCI device.
Link: https://lore.kernel.org/r/20240823093323.33450-2-brgl@bgdev.pl
Fixes: 8fb18619d910 ("PCI/pwrctl: Create platform devices for child OF nodes of the port node")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Move away from corporate infrastructure for upstream work. Also update
mailmap.
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20240903200956.68231-1-a.hindborg@kernel.org
[ Reworded title slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
A recent change started parking the RCG at an always on parent during
registration, something which specifically breaks handover from an early
serial console.
Quoting Stephen Boyd who fixed this issue for SM8550 [1]:
The QUPs aren't shared in a way that requires parking the RCG at
an always on parent in case some other entity turns on the clk.
The hardware is capable of setting a new frequency itself with
the DFS mode, so parking is unnecessary. Furthermore, there
aren't any GDSCs for these devices, so there isn't a possibility
of the GDSC turning on the clks for housekeeping purposes.
This wasn't a problem to mark these clks shared until we started
parking shared RCGs at clk registration time in commit
01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration").
Parking at init is actually harmful to the UART when earlycon is
used. If the device is pumping out data while the frequency
changes you'll see garbage on the serial console until the
driver can probe and actually set a proper frequency.
Fixes: 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration")
Fixes: d65d005f9a6c ("clk: qcom: add sc8280xp GCC driver")
Link: https://lore.kernel.org/all/20240819233628.2074654-2-swboyd@chromium.org/ [1]
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240902070830.8535-1-johan+linaro@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-08-30 (igc, e1000e, i40e)
This series contains updates to igc, e1000e, and i40 drivers.
Kurt Kanzenbach adds support for MQPRIO offloads and stops unintended,
excess interrupts on igc.
Sasha adds reporting of EEE (Energy Efficient Ethernet) ability and
moves a register define to a better suited file for igc.
Vitaly stops reporting errors on shutdown and suspend as they are not
fatal for e1000e.
Alex adds reporting of EEE to i40e.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
i40e: Add Energy Efficient Ethernet ability for X710 Base-T/KR/KX cards
e1000e: avoid failing the system during pm_suspend
igc: Move the MULTI GBT AN Control Register to _regs file
igc: Add Energy Efficient Ethernet ability
igc: Get rid of spurious interrupts
igc: Add MQPRIO offload support
====================
Link: https://patch.msgid.link/20240830210451.2375215-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
- Fix EIO if splice and page stealing are enabled on the fuse device
- Disable problematic combination of passthrough and writeback-cache
- Other bug fixes found by code review
* tag 'fuse-fixes-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: disable the combination of passthrough and writeback cache
fuse: update stats for pages in dropped aux writeback list
fuse: clear PG_uptodate when using a stolen page
fuse: fix memory leak in fuse_create_open
fuse: check aborted connection before adding requests to pending list for resending
fuse: use unsigned type for getxattr/listxattr size truncation
|
|
There's a potential race when `cgroup_bpf_enabled(CGROUP_GETSOCKOPT)` is
false during the execution of `BPF_CGROUP_GETSOCKOPT_MAX_OPTLEN`, but
becomes true when `BPF_CGROUP_RUN_PROG_GETSOCKOPT` is called.
This inconsistency can lead to `BPF_CGROUP_RUN_PROG_GETSOCKOPT` receiving
an "-EFAULT" from `__cgroup_bpf_run_filter_getsockopt(max_optlen=0)`.
Scenario shown as below:
`process A` `process B`
----------- ------------
BPF_CGROUP_GETSOCKOPT_MAX_OPTLEN
enable CGROUP_GETSOCKOPT
BPF_CGROUP_RUN_PROG_GETSOCKOPT (-EFAULT)
To resolve this, remove the `BPF_CGROUP_GETSOCKOPT_MAX_OPTLEN` macro and
directly uses `copy_from_sockptr` to ensure that `max_optlen` is always
set before `BPF_CGROUP_RUN_PROG_GETSOCKOPT` is invoked.
Fixes: 0d01da6afc54 ("bpf: implement getsockopt and setsockopt hooks")
Co-developed-by: Yanghui Li <yanghui.li@mediatek.com>
Signed-off-by: Yanghui Li <yanghui.li@mediatek.com>
Co-developed-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://patch.msgid.link/20240830082518.23243-1-Tze-nan.Wu@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When CONFIG_DQL is not enabled, dql_group should be treated as a dead
declaration. However, its current extern declaration assumes the linker
will ignore it, which is generally true across most compiler and
architecture combinations.
But in certain cases, the linker still attempts to resolve the extern
struct, even when the associated code is dead, resulting in a linking
error. For instance the following error in loongarch64:
>> loongarch64-linux-ld: net-sysfs.c:(.text+0x589c): undefined reference to `dql_group'
Modify the declaration of the dead object to be an empty declaration
instead of an extern. This change will prevent the linker from
attempting to resolve an undefined reference.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409012047.eCaOdfQJ-lkp@intel.com/
Fixes: 74293ea1c4db ("net: sysfs: Do not create sysfs for non BQL device")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://patch.msgid.link/20240902101734.3260455-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2024-09-01
Simon Horman catched two typos in our headers. No functional change.
* tag 'ieee802154-for-net-2024-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan:
ieee802154: Correct spelling in nl802154.h
mac802154: Correct spelling in mac802154.h
====================
Link: https://patch.msgid.link/20240901184213.2303047-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If netem_dequeue() enqueues packet to inner qdisc and that qdisc
returns __NET_XMIT_STOLEN. The packet is dropped but
qdisc_tree_reduce_backlog() is not called to update the parent's
q.qlen, leading to the similar use-after-free as Commit
e04991a48dbaf382 ("netem: fix return value if duplicate enqueue
fails")
Commands to trigger KASAN UaF:
ip link add type dummy
ip link set lo up
ip link set dummy0 up
tc qdisc add dev lo parent root handle 1: drr
tc filter add dev lo parent 1: basic classid 1:1
tc class add dev lo classid 1:1 drr
tc qdisc add dev lo parent 1:1 handle 2: netem
tc qdisc add dev lo parent 2: handle 3: drr
tc filter add dev lo parent 3: basic classid 3:1 action mirred egress
redirect dev dummy0
tc class add dev lo classid 3:1 drr
ping -c1 -W0.01 localhost # Trigger bug
tc class del dev lo classid 1:1
tc class add dev lo classid 1:1 drr
ping -c1 -W0.01 localhost # UaF
Fixes: 50612537e9ab ("netem: fix classful handling")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://patch.msgid.link/20240901182438.4992-1-stephen@networkplumber.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch improves two checks on user data.
The first one prevents bit 23 from being set, as specified by RFC 9197
(Sec 4.4.1):
Bit 23 Reserved; MUST be set to zero upon transmission and be
ignored upon receipt. This bit is reserved to allow for
future extensions of the IOAM Trace-Type bit field.
The second one checks that the tunnel destination address !=
IPV6_ADDR_ANY, just like we already do for the tunnel source address.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20240830191919.51439-1-justin.iurman@uliege.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver generates a random MAC once on load
and uses it over and over, including on two devices
needing a random MAC at the same time.
Jakub suggested revamping the driver to the modern
API for setting a random MAC rather than fixing
the old stuff.
The bug is as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://patch.msgid.link/20240829175201.670718-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is part of an effort [1] to assign a section in MAINTAINERS to header
files that relate to Networking. In this case the files with "net" in
their name.
[1] https://lore.kernel.org/netdev/20240821-net-mnt-v2-0-59a5af38e69d@kernel.org/
It seems that net-cw1200.h is part of the CW1200 WLAN driver and
this it is appropriate to add it to the section for that driver.
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240902-wifi-mnt-v2-1-f5ad1f36e993@kernel.org
|
|
Use time_after macro instead of using jiffies directly to handle wraparound.
Change the type to to unsigned long to avoid unnecessary casts.
Signed-off-by: Chen Yufan <chenyufan@vivo.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240823070320.430753-1-chenyufan@vivo.com
|
|
The wilc_sdio_suspend() does clk_disable_unprepare() on rtc_clk clock,
make sure wilc_sdio_resume() does matching clk_prepare_enable(), else
any suspend/resume cycle leads to clock disable/enable imbalance. Fix
the imbalance.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240821183717.163235-1-marex@denx.de
|
|
In case the hardware is not initialized, do not operate it during
suspend/resume cycle, the hardware is already off so there is no
reason to access it.
In fact, wilc_sdio_enable_interrupt() in the resume callback does
interfere with the same call when initializing the hardware after
resume and makes such initialization after resume fail. Fix this
by not operating uninitialized hardware during suspend/resume.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240821183639.163187-1-marex@denx.de
|
|
If we have 2 threads that are using the same file descriptor and one of
them is doing direct IO writes while the other is doing fsync, we have a
race where we can end up either:
1) Attempt a fsync without holding the inode's lock, triggering an
assertion failures when assertions are enabled;
2) Do an invalid memory access from the fsync task because the file private
points to memory allocated on stack by the direct IO task and it may be
used by the fsync task after the stack was destroyed.
The race happens like this:
1) A user space program opens a file descriptor with O_DIRECT;
2) The program spawns 2 threads using libpthread for example;
3) One of the threads uses the file descriptor to do direct IO writes,
while the other calls fsync using the same file descriptor.
4) Call task A the thread doing direct IO writes and task B the thread
doing fsyncs;
5) Task A does a direct IO write, and at btrfs_direct_write() sets the
file's private to an on stack allocated private with the member
'fsync_skip_inode_lock' set to true;
6) Task B enters btrfs_sync_file() and sees that there's a private
structure associated to the file which has 'fsync_skip_inode_lock' set
to true, so it skips locking the inode's VFS lock;
7) Task A completes the direct IO write, and resets the file's private to
NULL since it had no prior private and our private was stack allocated.
Then it unlocks the inode's VFS lock;
8) Task B enters btrfs_get_ordered_extents_for_logging(), then the
assertion that checks the inode's VFS lock is held fails, since task B
never locked it and task A has already unlocked it.
The stack trace produced is the following:
assertion failed: inode_is_locked(&inode->vfs_inode), in fs/btrfs/ordered-data.c:983
------------[ cut here ]------------
kernel BUG at fs/btrfs/ordered-data.c:983!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 9 PID: 5072 Comm: worker Tainted: G U OE 6.10.5-1-default #1 openSUSE Tumbleweed 69f48d427608e1c09e60ea24c6c55e2ca1b049e8
Hardware name: Acer Predator PH315-52/Covini_CFS, BIOS V1.12 07/28/2020
RIP: 0010:btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs]
Code: 50 d6 86 c0 e8 (...)
RSP: 0018:ffff9e4a03dcfc78 EFLAGS: 00010246
RAX: 0000000000000054 RBX: ffff9078a9868e98 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff907dce4a7800 RDI: ffff907dce4a7800
RBP: ffff907805518800 R08: 0000000000000000 R09: ffff9e4a03dcfb38
R10: ffff9e4a03dcfb30 R11: 0000000000000003 R12: ffff907684ae7800
R13: 0000000000000001 R14: ffff90774646b600 R15: 0000000000000000
FS: 00007f04b96006c0(0000) GS:ffff907dce480000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f32acbfc000 CR3: 00000001fd4fa005 CR4: 00000000003726f0
Call Trace:
<TASK>
? __die_body.cold+0x14/0x24
? die+0x2e/0x50
? do_trap+0xca/0x110
? do_error_trap+0x6a/0x90
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? exc_invalid_op+0x50/0x70
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? asm_exc_invalid_op+0x1a/0x20
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
btrfs_sync_file+0x21a/0x4d0 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? __seccomp_filter+0x31d/0x4f0
__x64_sys_fdatasync+0x4f/0x90
do_syscall_64+0x82/0x160
? do_futex+0xcb/0x190
? __x64_sys_futex+0x10e/0x1d0
? switch_fpu_return+0x4f/0xd0
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Another problem here is if task B grabs the private pointer and then uses
it after task A has finished, since the private was allocated in the stack
of task A, it results in some invalid memory access with a hard to predict
result.
This issue, triggering the assertion, was observed with QEMU workloads by
two users in the Link tags below.
Fix this by not relying on a file's private to pass information to fsync
that it should skip locking the inode and instead pass this information
through a special value stored in current->journal_info. This is safe
because in the relevant section of the direct IO write path we are not
holding a transaction handle, so current->journal_info is NULL.
The following C program triggers the issue:
$ cat repro.c
/* Get the O_DIRECT definition. */
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <stdint.h>
#include <fcntl.h>
#include <errno.h>
#include <string.h>
#include <pthread.h>
static int fd;
static ssize_t do_write(int fd, const void *buf, size_t count, off_t offset)
{
while (count > 0) {
ssize_t ret;
ret = pwrite(fd, buf, count, offset);
if (ret < 0) {
if (errno == EINTR)
continue;
return ret;
}
count -= ret;
buf += ret;
}
return 0;
}
static void *fsync_loop(void *arg)
{
while (1) {
int ret;
ret = fsync(fd);
if (ret != 0) {
perror("Fsync failed");
exit(6);
}
}
}
int main(int argc, char *argv[])
{
long pagesize;
void *write_buf;
pthread_t fsyncer;
int ret;
if (argc != 2) {
fprintf(stderr, "Use: %s <file path>\n", argv[0]);
return 1;
}
fd = open(argv[1], O_WRONLY | O_CREAT | O_TRUNC | O_DIRECT, 0666);
if (fd == -1) {
perror("Failed to open/create file");
return 1;
}
pagesize = sysconf(_SC_PAGE_SIZE);
if (pagesize == -1) {
perror("Failed to get page size");
return 2;
}
ret = posix_memalign(&write_buf, pagesize, pagesize);
if (ret) {
perror("Failed to allocate buffer");
return 3;
}
ret = pthread_create(&fsyncer, NULL, fsync_loop, NULL);
if (ret != 0) {
fprintf(stderr, "Failed to create writer thread: %d\n", ret);
return 4;
}
while (1) {
ret = do_write(fd, write_buf, pagesize, 0);
if (ret != 0) {
perror("Write failed");
exit(5);
}
}
return 0;
}
$ mkfs.btrfs -f /dev/sdi
$ mount /dev/sdi /mnt/sdi
$ timeout 10 ./repro /mnt/sdi/foo
Usually the race is triggered within less than 1 second. A test case for
fstests will follow soon.
Reported-by: Paulo Dias <paulo.miguel.dias@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219187
Reported-by: Andreas Jahn <jahn-andi@web.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219199
Reported-by: syzbot+4704b3cc972bd76024f1@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/00000000000044ff540620d7dee2@google.com/
Fixes: 939b656bc8ab ("btrfs: fix corruption after buffer fault in during direct IO append write")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
