| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc drivers updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystems for
6.4-rc1.
It's pretty big, but due to the removal of pcmcia drivers, almost
breaks even for number of lines added vs. removed, a nice change.
Included in here are:
- removal of unused PCMCIA drivers (finally!)
- Interconnect driver updates and additions
- Lots of IIO driver updates and additions
- MHI driver updates
- Coresight driver updates
- NVMEM driver updates, which required some OF updates
- W1 driver updates and a new maintainer to manage the subsystem
- FPGA driver updates
- New driver subsystem, CDX, for AMD systems
- lots of other small driver updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (196 commits)
mcb-lpc: Reallocate memory region to avoid memory overlapping
mcb-pci: Reallocate memory region to avoid memory overlapping
mcb: Return actual parsed size when reading chameleon table
kernel/configs: Drop Android config fragments
virt: acrn: Replace obsolete memalign() with posix_memalign()
spmi: Add a check for remove callback when removing a SPMI driver
spmi: fix W=1 kernel-doc warnings
spmi: mtk-pmif: Drop of_match_ptr for ID table
spmi: pmic-arb: Convert to platform remove callback returning void
spmi: mtk-pmif: Convert to platform remove callback returning void
spmi: hisi-spmi-controller: Convert to platform remove callback returning void
w1: gpio: remove unnecessary ENOMEM messages
w1: omap-hdq: remove unnecessary ENOMEM messages
w1: omap-hdq: add SPDX tag
w1: omap-hdq: allow compile testing
w1: matrox: remove unnecessary ENOMEM messages
w1: matrox: use inline over __inline__
w1: matrox: switch from asm to linux header
w1: ds2482: do not use assignment in if condition
w1: ds2482: drop unnecessary header
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the large set of staging driver updates for 6.4-rc1. Once
again, we removed more code than was added, a nice trend.
It was a calm cycle, mostly all just small coding style cleanups,
included in here are:
- removal of the greybus loopback testing tools, userspace code that
didn't belong in a driver subdirectory and was causing problems for
some build systems
- platform remove callback cleanups
- rtl8192e huge cleanups
- other small staging driver cleanups.
All of these have been in linux-next for a while with no reported
problems"
* tag 'staging-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (185 commits)
staging: rtl8192e: Fix W_DISABLE# does not work after stop/start
staging: rtl8192e: Remove unchanged variables bfsync_processing and more
staging: rtl8192e: Remove unchanged variable frame_sync_monitor
staging: rtl8192e: Remove unchanged variable chan_forced
staging: rtl8192e: Remove set to true while true of bfirst_after_down
staging: rtl8192e: Remove second initialization of bActuallySet
staging: rtl8192e: Remove unused macro RT_SET_PS_LEVEL
staging: rtl8192e: Remove unused function rtl92e_disable_nic
staging: rtl8192e: Remove unchanged variable RegRfPsLevel
staging: rtl8172: Add blank lines after declarations
staging: rtl8192e: Remove unused variable RF_Type
staging: rtl8192e: Remove one of two checks for hardware RTL8192SE
staging: rtl8192e: Remove unused function _rtl92e_dm_init_wa_broadcom_iot
staging: rtl8192e: Remove macro IS_HARDWARE_TYPE_8192SE
staging: greybus: drop loopback test files
staging: rtl8192e: Add blank lines after declarations
staging: rtl8192e: avoid CamelCase <dot11RSNAStatsCCMPDecryptErrors>
staging: rtl8192e: avoid CamelCase <dot11RSNAStatsCCMPReplays>
staging: rtl8192e: avoid CamelCase <dot11RSNAStatsCCMPFormatErrors>
staging: rtl8192e: fix alignment to match open parenthesis
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty/serial driver updates for 6.4-rc1.
Nothing major, just lots of tiny, constant, forward development. This
includes:
- obligatory n_gsm updates and feature additions
- 8250_em driver updates
- sh-sci driver updates
- dts cleanups and updates
- general cleanups and improvements by Ilpo and Jiri
- other small serial driver core fixes and driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (87 commits)
n_gsm: Use array_index_nospec() with index that comes from userspace
tty: vt: drop checks for undefined VT_SINGLE_DRIVER
tty: vt: distribute EXPORT_SYMBOL()
tty: vt: simplify some cases in tioclinux()
tty: vt: reformat tioclinux()
tty: serial: sh-sci: Fix end of transmission on SCI
tty: serial: sh-sci: Add support for tx end interrupt handling
tty: serial: sh-sci: Fix TE setting on SCI IP
tty: serial: sh-sci: Add RZ/G2L SCIFA DMA rx support
tty: serial: sh-sci: Add RZ/G2L SCIFA DMA tx support
serial: max310x: fix IO data corruption in batched operations
serial: core: Disable uart_start() on uart_remove_one_port()
serial: 8250: Reinit port->pm on port specific driver unbind
serial: 8250: Add missing wakeup event reporting
tty: serial: fsl_lpuart: use UARTMODIR register bits for lpuart32 platform
tty: serial: fsl_lpuart: adjust buffer length to the intended size
serial: fix TIOCSRS485 locking
serial: make SiFive serial drivers depend on ARCH_ symbols
tty: synclink_gt: don't allocate and pass dummy flags
tty: serial: simplify qcom_geni_serial_send_chunk_fifo()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the large set of USB and Thunderbolt changes for 6.4-rc1.
The "biggest" thing in here is the removal of two obsolete drivers,
u132-hcd and ftdi-elan, making this a net-removal of code overall.
Other than the driver removals, included in here are:
- Thunderbolt updates for new hardware and features
- xhci driver updates and fixes
- dwc3 driver updates and fixes
- gadget core and driver updates and features added
- mtu3 driver updates
- dwc2 driver fixes and updates
- usb-serial driver updates
- typec driver updates and fixes
- platform remove callback changes
- dts updates and conversions
- other small changes
All have been in linux-next for a while with no reported problems"
* tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (177 commits)
usb: dwc3: gadget: Refactor EP0 forced stall/restart into a separate API
usb: dwc3: gadget: Execute gadget stop after halting the controller
media: radio-shark: Add endpoint checks
USB: sisusbvga: Add endpoint checks
USB: core: Add routines for endpoint checks in old drivers
usb: dwc3: gadget: Stall and restart EP0 if host is unresponsive
dt-bindings: usb: snps,dwc3: Add 'snps,parkmode-disable-hs-quirk' quirk
usb: dwc3: core: add support for disabling High-speed park mode
dt-bindings: usb: ci-hdrc-usb2: allow multiple PHYs
usb: mtu3: add optional clock xhci_ck and frmcnt_ck
dt-bindings: usb: mtu3: add two optional clocks
usb: mtu3: expose role-switch control to userspace
usb: mtu3: unlock @mtu->lock just before giving back request
usb: mtu3: fix kernel panic at qmu transfer done irq handler
usb: mtu3: use boolean return value
usb: mtu3: give back request when rx error happens
usb: chipidea: fix missing goto in `ci_hdrc_probe`
usb: gadget: udc: core: Prevent redundant calls to pullup
usb: gadget: udc: core: Invoke usb_gadget_connect only when started
usb: typec: ucsi: don't print PPM init deferred errors
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"The pull request includes a few changes, Its main purpose is to
prepare for my future work by taking over maintainership from Stefan
Richter. I have plans to work on several items; e.g. packet processing
in workqueue context instead of tasklet.
As you may be aware, the IEEE 1394 technology is outdated. However, we
still have users. It is better to ensure a smooth transition for the
users to shift to other categories of devices"
* tag 'firewire-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: init_ohci1394_dma: use correct function names in comments
MAINTAINERS: replace maintainer of FireWire subsystem
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- import a bunch of HID selftests from out-of-tree hid-tools project
(Benjamin Tissoires)
- drastically reducing Bluetooth disconnects on hid-nintendo driven
devices (Daniel J. Ogorchock)
- lazy initialization of battery interfaces in wacom driver (Jason
Gerecke)
- generic support for all Kye tablets (David Yang)
- proper rumble queue overrun handling in hid-nintendo (Daniel J.
Ogorchock)
- support for ADC measurement in logitech-hidpp driver (Bastien Nocera)
- reset GPIO support in i2c-hid (Hans de Goede)
- improved handling of generic "Digitizer" usage (Jason Gerecke)
- support for KEY_CAMERA_FOCUS (Feng Qi)
- quirks for Apple Geyser 3 and Apple Geyser 4 (Alex Henrie)
- assorted functional fixes and device ID additions
* tag 'for-linus-2023042601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (54 commits)
HID: amd_sfh: Fix max supported HID devices
HID: wacom: generic: Set battery quirk only when we see battery data
HID: wacom: Lazy-init batteries
HID: Ignore battery for ELAN touchscreen on ROG Flow X13 GV301RA
HID: asus: explicitly include linux/leds.h
HID: lg-g15: explicitly include linux/leds.h
HID: steelseries: explicitly include linux/leds.h
HID: apple: Set the tilde quirk flag on the Geyser 3
HID: apple: explicitly include linux/leds.h
HID: mcp2221: fix get and get_direction for gpio
HID: mcp2221: fix report layout for gpio get
HID: wacom: Set a default resolution for older tablets
HID: i2c-hid-of: Add reset GPIO support to i2c-hid-of
HID: i2c-hid-of: Allow using i2c-hid-of on non OF platforms
HID: i2c-hid-of: Consistenly use dev local variable in probe()
HID: kye: Fix rdesc for kye tablets
HID: amd_sfh: Support for additional light sensor
HID: amd_sfh: Handle "no sensors" enabled for SFH1.1
HID: amd_sfh: Increase sensor command timeout for SFH1.1
HID: amd_sfh: Correct the stop all command
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Nothing really exiting in here.
The majority of lines changed is due to Uwe's preparation patches to
change the return value of the .remove() callback to void.
Summary:
- vt_buffer.h: Fix build on alpha (Randy Dunlap)
- mmp: Clock handling fix (Christophe JAILLET)
- 68328fb, ps3fb, vfb: Init .owner field of struct fb_ops (Thomas
Zimmermann)
- fbdev: cg14: Convert to platform remove callback returning void
- Preparation patches to convert drivers to return void in .remove()
callback (Uwe Kleine-König)
- Drop Paul Mackerras as rage128 maintainer"
* tag 'fbdev-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (51 commits)
MAINTAINERS: Remove rage128 framebuffer driver maintainer
fbdev: vfb: Init owner field of struct fb_ops
fbdev: ps3fb: Init owner field of struct fb_ops
fbdev: 68328fb: Init owner field of struct fb_ops
fbdev: mmp: Fix deferred clk handling in mmphw_probe()
linux/vt_buffer.h: allow either builtin or modular for macros
fbdev: xilinxfb: Convert to platform remove callback returning void
fbdev: wmt_ge_rops: Convert to platform remove callback returning void
fbdev: wm8505fb: Convert to platform remove callback returning void
fbdev: vt8500lcdfb: Convert to platform remove callback returning void
fbdev: via: Convert to platform remove callback returning void
fbdev: vga16fb: Convert to platform remove callback returning void
fbdev: vfb: Convert to platform remove callback returning void
fbdev: vesafb: Convert to platform remove callback returning void
fbdev: uvesafb: Convert to platform remove callback returning void
fbdev: tcx: Convert to platform remove callback returning void
fbdev: sm501fb: Convert to platform remove callback returning void
fbdev: simplefb: Convert to platform remove callback returning void
fbdev: sh_mobile_lcdcfb: Convert to platform remove callback returning void
fbdev: sh7760fb: Convert to platform remove callback returning void
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Mostly fixes for DTs or DT handling this time. And a few driver
bugfixes"
* tag 'i2c-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (28 commits)
i2c: xiic: xiic_xfer(): Fix runtime PM leak on error path
i2c: cadence: cdns_i2c_master_xfer(): Fix runtime PM leak on error path
i2c: omap: Improve error reporting for problems during .remove()
i2c: cadence: Add reset controller support
dt-bindings: i2c: cadence: Document `resets` property
i2c: mediatek: add support for MT7981 SoC
dt-bindings: i2c: i2c-mt65xx: add MediaTek MT7981 SoC
dt-bindings: i2c: Drop unneeded quotes
i2c: brcmstb: use devm_platform_ioremap_resource_byname()
i2c: cadence: Detect maximum transfer size
i2c: cadence: Allow to specify the FIFO depth
dt-bindings: i2c: cadence: Document `fifo-depth` property
i2c: xiic: Use devm_platform_get_and_ioremap_resource()
i2c: mpc: Use i2c-scl-clk-low-timeout-us i2c property
i2c: mpc: Use of_property_read_u32 instead of of_get_property
dt-bindings: i2c: mpc: Mark "fsl,timeout" as deprecated
i2c: xiic: hide OF related data for COMPILE_TEST
i2c: synquacer: mark OF related data as maybe unused
dt-bindings: i2c: i2c-mt65xx: Add compatible for MT6795 Helio X10
i2c: imx: Simplify using devm_clk_get_enabled()
...
|
|
Pull IPMI updates from Corey Minyard:
"Minor bug fixes for the IPMI driver
There was a bug in the SSIF driver where in certain conditions it
could stop working.
Outside of that: spelling fixes, removing some dead code, re-adding a
missing statistic increment, and removal of register_sysctl_table()"
* tag 'for-linus-6.4-1' of https://github.com/cminyard/linux-ipmi:
ipmi:ssif: Drop if blocks with always false condition
ipmi: fix SSIF not responding under certain cond.
ipmi:ssif: Add send_retries increment
char:ipmi:Fix spelling mistake "asychronously" -> "asynchronously"
ipmi: simplify sysctl registration
ipmi: ASPEED_BT_IPMI_BMC: select REGMAP_MMIO instead of depending on it
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A fairly standard release for SPI with the exception of a change to
the API for specifying chip selects done in preparation for supporting
devices with more than one chip select, this required some mechanical
changes throughout the tree which have been cooking in -next happily
for a while.
There's also a new API to allow us to support TPM chips on half duplex
controllers.
Summary:
- Refactoring in preparation for supporting multiple chip selects for
a single device, needed by some flash devices, which required a
change in the SPI device API visible throughout the tree
- Support for hardware assisted interaction with SPI TPMs on half
duplex controllers, implemented on nVidia Tedra210 QuadSPI
- Optimisation for large transfers on fsl-cpm devices
- Cleanups around device property use which fix some sisues with
fwnode
- Use of both void remove() and devm_platform_.*ioremap_resource()
- Support for AMD Pensando Elba, Amlogic A1, Cadence device mode,
Intel MetorLake-S and StarFive J7110 QuadSPI"
* tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (185 commits)
spi: bcm63xx: use macro DEFINE_SIMPLE_DEV_PM_OPS
spi: tegra210-quad: Enable TPM wait polling
spi: Add TPM HW flow flag
spi: bcm63xx: remove PM_SLEEP based conditional compilation
spi: cadence-quadspi: use macro DEFINE_SIMPLE_DEV_PM_OPS
spi: spi-cadence: Add support for Slave mode
spi: spi-cadence: Switch to spi_controller structure
spi: cadence-quadspi: fix suspend-resume implementations
spi: dw: Add support for AMD Pensando Elba SoC
spi: dw: Add AMD Pensando Elba SoC SPI Controller
spi: cadence-quadspi: Disable the SPI before reconfiguring
spi: cadence-quadspi: Update the read timeout based on the length
spi: spi-loopback-test: Add module param for iteration length
spi: add support for Amlogic A1 SPI Flash Controller
dt-bindings: spi: add Amlogic A1 SPI controller
spi: fsl-spi: No need to check transfer length versus word size
spi: fsl-spi: Change mspi_apply_cpu_mode_quirks() to void
spi: fsl-cpm: Use 16 bit mode for large transfers with even size
spi: fsl-spi: Re-organise transfer bits_per_word adaptation
spi: fsl-spi: Fix CPM/QE mode Litte Endian
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"At this time, it's an interesting mixture of changes for both old and
new stuff. Majority of changes are about ASoC (lots of systematic
changes for converting remove callbacks to void, and cleanups), while
we got the fixes and the enhancements of very old PCI cards, too.
Here are some highlights:
ALSA/ASoC Core:
- Continued effort of more ASoC core cleanups
- Minor improvements for XRUN handling in indirect PCM helpers
- Code refactoring of PCM core code
ASoC:
- Continued feature and simplification work on SOF, including
addition of a no-DSP mode for bringup, HDA MLink and extensions to
the IPC4 protocol
- Hibernation support for CS35L45
- More DT binding conversions
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas
R-Car Gen4, Rockchip RK3588 and TI TAS5733
ALSA:
- Lots of works for legacy emu10k1 and ymfpci PCI drivers
- PCM kselftest fixes and enhancements"
* tag 'sound-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (586 commits)
ALSA: emu10k1: use high-level I/O in set_filterQ()
ALSA: emu10k1: use high-level I/O functions also during init
ALSA: emu10k1: fix error handling in snd_audigy_i2c_volume_put()
ALSA: emu10k1: don't stop DSP in _snd_emu10k1_{,audigy_}init_efx()
ALSA: emu10k1: fix SNDRV_EMU10K1_IOCTL_SINGLE_STEP
ALSA: emu10k1: skip Sound Blaster-specific hacks for E-MU cards
ALSA: emu10k1: fixup DSP defines
ALSA: emu10k1: pull in some register definitions from kX-project
ALSA: emu10k1: remove some bogus defines
ALSA: emu10k1: eliminate some unused defines
ALSA: emu10k1: fix lineup of EMU_HANA_* defines
ALSA: emu10k1: comment updates
ALSA: emu10k1: fix snd_emu1010_fpga_read() input masking for rev2 cards
ALSA: emu10k1: remove unused emu->pcm_playback_efx_substream field
ALSA: emu10k1: remove unused `resume` parameter from snd_emu10k1_init()
ALSA: emu10k1: minor optimizations
ALSA: emu10k1: remove remaining cruft from snd_emu10k1_emu1010_init()
ALSA: emu10k1: remove apparently pointless EMU_HANA_OPTION_CARDS reads
ALSA: emu10k1: remove apparently pointless FPGA reads
ALSA: emu10k1: stop doing weird things with HCFG in snd_emu10k1_emu1010_init()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Resource management:
- Add pci_dev_for_each_resource() and pci_bus_for_each_resource()
iterators
PCIe native device hotplug:
- Fix AB-BA deadlock between reset_lock and device_lock
Power management:
- Wait longer for devices to become ready after resume (as we do for
reset) to accommodate Intel Titan Ridge xHCI devices
- Extend D3hot delay for NVIDIA HDA controllers to avoid
unrecoverable devices after a bus reset
Error handling:
- Clear PCIe Device Status after EDR since generic error recovery now
only clears it when AER is native
ASPM:
- Work around Chromebook firmware defect that clobbers Capability
list (including ASPM L1 PM Substates Cap) when returning from
D3cold to D0
Freescale i.MX6 PCIe controller driver:
- Install imprecise external abort handler only when DT indicates
PCIe support
Freescale Layerscape PCIe controller driver:
- Add ls1028a endpoint mode support
Qualcomm PCIe controller driver:
- Add SM8550 DT binding and driver support
- Add SDX55 DT binding and driver support
- Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3
- Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0
- Add DT "mhi" register region for supported SoCs
- Expose link transition counts via debugfs to help debug low power
issues
- Support system suspend and resume; reduce interconnect bandwidth
and turn off clock and PHY if there are no active devices
- Enable async probe by default to reduce boot time
Miscellaneous:
- Sort controller Kconfig entries by vendor"
* tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (56 commits)
PCI: xilinx: Drop obsolete dependency on COMPILE_TEST
PCI: mobiveil: Sort Kconfig entries by vendor
PCI: dwc: Sort Kconfig entries by vendor
PCI: Sort controller Kconfig entries by vendor
PCI: Use consistent controller Kconfig menu entry language
PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt
PCI: hv: Add 'Microsoft' to Kconfig prompt
PCI: meson: Add 'Amlogic' to Kconfig prompt
PCI: Use of_property_present() for testing DT property presence
PCI/PM: Extend D3hot delay for NVIDIA HDA controllers
dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
PCI: qcom: Add SM8550 PCIe support
dt-bindings: PCI: qcom: Add SM8550 compatible
PCI: qcom: Add support for SDX55 SoC
dt-bindings: PCI: qcom-ep: Fix the unit address used in example
dt-bindings: PCI: qcom: Add SDX55 SoC
dt-bindings: PCI: qcom: Update maintainers entry
PCI: qcom: Enable async probe by default
PCI: qcom: Add support for system suspend and resume
PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter
...
|
|
The intention is to clean up the code and make it look a bit more
consistent.
Mark all unitialized module parameter variables as __read_mostly,
not just one of them. The other parameters are read-mostly too.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This is a cleanup which improves code consistency. Move the force_irq_on
module parameter variable and definition to the same place where we have
variables and definitions for other module parameters.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
By default, all non-POLL C-states are entered with interrupts disabled.
There are 2 ways to make 'intel_idle' enter C-states with interrupts
enabled:
1. Mark the C-state with the CPUIDLE_FLAG_IRQ_ENABLE flag.
2. Use the force_irq_on module parameter.
The former is the "proper" way of doing it, it is per-C-state and
per-platform. The latter is for debugging purposes only.
The problem is that intel_idle prints the "forced intel_idle_irq"
message in both cases, even though the former case does not needed
this message, because nothing is forced there. This patch addresses the
problem.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The following C-state flags are currently mutually-exclusive and should not
be combined:
* IRQ_ENABLE
* IBRS
* XSTATE
There is a warning for the situation when the IRQ_ENABLE flag
is combined with the IBRS flag, but no warnings for other combinations.
This is inconsistent and prone to errors.
Improve the situation by adding warnings for all the unexpected
combinations. Add a couple of helpful commentaries too.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Introduce a temporary 'state' variable for referencing the currently
processed C-state in the intel_idle_init_cstates_icpu() function.
This makes code lines shorter and easier to read.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The intel_idle_init_cstates_icpu() function includes a loop that iterates
over every C-state. Inside the loop, the same C-state data is referenced 2
ways:
1. as cpuidle_state_table[cstate]
2. as drv->states[drv->state_count] (but it is a copy of #1, not the same
object).
Make the code be more consistent and easier to read by using only the 2nd
way. So the code structure would be as follows:
1. Use cpuidle_state_table[cstate]
2. Copy cpuidle_state_table[cstate] to drv->states[drv->state_count]
3. Use only drv->states[drv->state_count] from this point.
Note, this change introduces a checkpatch.pl warning (too long line), but it
will be addressed in the next patch.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Substitute 'printk()' with 'pr_info()', because 'intel_idle' already uses
'pr_debug()', so using 'pr_info()' will be more consistent.
In addition to this, this patch addresses the following checkpatch.pl
warning:
WARNING: printk() should include KERN_<LEVEL> facility level
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
According to my information, there are no active users of this driver in
the field.
Moreover, it does some really questionable things and gets in the way of
thermal core improvements, so drop it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The ACPI thermal driver creates extra sysfs attributes in its own
directory pointing to the thermal zone it is related to and add a
pointer to the sysfs ACPI thermal device from the thermal zone sysfs
entry.
This is very specific to this ACPI thermal driver, let's encapsulate
the related creation/deletion code to group it inside a function we
can identify later for removal if needed.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[ rjw: Subject adjustment, removal of trailing white space ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In order to get the device associated with the thermal zone, let's use
the wrapper thermal_zone_device() instead of accessing directly the
content of the thermal zone device structure.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[ rjw: Subject adjustment, removal of trailing white space ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The pch_critical() callback accesses the thermal zone device structure
internals, it dereferences the thermal zone struct device and the 'type'.
Use the available accessors instead of accessing the structure directly.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There are still some drivers needing to play with the thermal zone
device internals. That is not the best but until we can figure out if
the information is really needed, let's encapsulate the field used in
the thermal zone device structure, so we can move forward relocating
the thermal zone device structure definition in the thermal framework
private headers.
Some drivers are accessing tz->device, that implies they need to have
the knowledge of the thermal_zone_device structure but we want to
self-encapsulate this structure and reduce the scope of the structure
to the thermal core only.
By adding this wrapper, these drivers won't need the thermal zone
device structure definition and are no longer an obstacle to its
relocation to the private thermal core headers.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
For the algorithm of choosing the next target state in step_wise
governor, the code does the right thing but is implemented in a
way different from what the comment describes. And this hurts the code
readability.
As the logic in the comment is simpler, adjust the code logic to align
with the comment.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 4102c4042a33 ("thermal/core: Remove DROP_FULL and RAISE_FULL")
removes support for THERMAL_TREND_RAISE_FULL/DROP_FULL but leaves the
comment unchanged.
Delete the obsolte comment about THERMAL_TREND_RAISE_FULL/DROP_FULL.
Fixes: 4102c4042a33 ("thermal/core: Remove DROP_FULL and RAISE_FULL")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
- First part of DT header detangling dropping cpu.h from of_device.h
and replacing some includes with forward declarations. A handful of
drivers needed some adjustment to their includes as a result.
- Refactor of_device.h to be used by bus drivers rather than various
device drivers. This moves non-bus related functions out of
of_device.h. The end goal is for of_platform.h and of_device.h to
stop including each other.
- Refactor open coded parsing of "ranges" in some bus drivers to use DT
address parsing functions
- Add some new address parsing functions of_property_read_reg(),
of_range_count(), and of_range_to_resource() in preparation to
convert more open coded parsing of DT addresses to use them.
- Treewide clean-ups to use of_property_read_bool() and
of_property_present() as appropriate. The ones here are the ones that
didn't get picked up elsewhere.
* tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
bus: tegra-gmi: Replace of_platform.h with explicit includes
hte: Use of_property_present() for testing DT property presence
w1: w1-gpio: Use of_property_read_bool() for boolean properties
virt: fsl: Use of_property_present() for testing DT property presence
soc: fsl: Use of_property_present() for testing DT property presence
sbus: display7seg: Use of_property_read_bool() for boolean properties
sparc: Use of_property_read_bool() for boolean properties
sparc: Use of_property_present() for testing DT property presence
bus: mvebu-mbus: Remove open coded "ranges" parsing
of/address: Add of_property_read_reg() helper
of/address: Add of_range_count() helper
of/address: Add support for 3 address cell bus
of/address: Add of_range_to_resource() helper
of: unittest: Add bus address range parsing tests
of: Drop cpu.h include from of_device.h
OPP: Adjust includes to remove of_device.h
irqchip: loongson-eiointc: Add explicit include for cpuhotplug.h
cpuidle: Adjust includes to remove of_device.h
cpufreq: sun50i: Add explicit include for cpu.h
cpufreq: Adjust includes to remove of_device.h
...
|
|
The system refused to do a test_resume because it found that the
swap device has already been taken by someone else. Specifically,
the swsusp_check()->blkdev_get_by_dev(FMODE_EXCL) is supposed to
do this check.
Steps to reproduce:
dd if=/dev/zero of=/swapfile bs=$(cat /proc/meminfo |
awk '/MemTotal/ {print $2}') count=1024 conv=notrunc
mkswap /swapfile
swapon /swapfile
swap-offset /swapfile
echo 34816 > /sys/power/resume_offset
echo test_resume > /sys/power/disk
echo disk > /sys/power/state
PM: Using 3 thread(s) for compression
PM: Compressing and saving image data (293150 pages)...
PM: Image saving progress: 0%
PM: Image saving progress: 10%
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
PM: Image saving progress: 20%
PM: Image saving progress: 30%
PM: Image saving progress: 40%
PM: Image saving progress: 50%
pcieport 0000:00:02.5: pciehp: Slot(0-5): No device found
PM: Image saving progress: 60%
PM: Image saving progress: 70%
PM: Image saving progress: 80%
PM: Image saving progress: 90%
PM: Image saving done
PM: hibernation: Wrote 1172600 kbytes in 2.70 seconds (434.29 MB/s)
PM: S|
PM: hibernation: Basic memory bitmaps freed
PM: Image not found (code -16)
This is because when using the swapfile as the hibernation storage,
the block device where the swapfile is located has already been mounted
by the OS distribution(usually mounted as the rootfs). This is not
an issue for normal hibernation, because software_resume()->swsusp_check()
happens before the block device(rootfs) mount. But it is a problem for the
test_resume mode. Because when test_resume happens, the block device has
been mounted already.
Thus remove the FMODE_EXCL for test_resume mode. This would not be a
problem because in test_resume stage, the processes have already been
frozen, and the race condition described in
Commit 39fbef4b0f77 ("PM: hibernate: Get block device exclusively in swsusp_check()")
is unlikely to happen.
Fixes: 39fbef4b0f77 ("PM: hibernate: Get block device exclusively in swsusp_check()")
Reported-by: Yifan Li <yifan2.li@intel.com>
Suggested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Tested-by: Wendy Wang <wendy.wang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There is need to check snapshot_test and open block device
in different mode, so as to avoid the race condition.
No functional changes intended.
Suggested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull more thermal control changes for 6.4-rc1 from Daniel Lezcano:
"- Add compatible strings DT bindings for imx6sll and imx6ul to fix
dtbs check warning (Stefan Wahren)
- Update the example in the DT bindings to reflect changes with the
ADC node name for QCom TM and TM5 (Marijn Suijten)
- Fix the comments for the cpuidle_cooling_register() function to
match the function prototype (Chenggang Wang)
- Fix inconsistent temperature read and some Mediatek variant board
reboot by reverting a change and handling the temperature
differently (AngeloGioacchino Del Regno)
- Fix a memory leak in the initialization error path for the Mediatek
driver (Kang Chen)
- Use of_address_to_resource() in the Mediatek driver (Rob Herring)
- Fix unit address in the QCom tsens driver DT bindings (Krzysztof
Kozlowski)"
* tag 'thermal-v6.4-rc1-3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
dt-bindings: thermal: qcom-tsens: Correct unit address
thermal/drivers/mediatek: Use of_address_to_resource()
thermal/drivers/mediatek: Change clk_prepare_enable to devm_clk_get_enabled in mtk_thermal_probe
thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in mtk_thermal_probe
thermal/drivers/mediatek: Add temperature constraints to validate read
Revert "thermal/drivers/mediatek: Add delay after thermal banks initialization"
thermal/drivers/cpuidle_cooling: Delete unmatched comments
dt-bindings: thermal: Use generic ADC node name in examples
dt-bindings: imx-thermal: Add imx6sll and imx6ul compatible
|
|
The Wi-Fi module in x86 Apple machines has a "module-instance" device
property that specifies the platform type and is used for firmware
selection. Its value is a string, so add support for string values in
acpi_extract_apple_properties().
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The LSM303D on the Lenovo Yoga Tablet 2 series is present
as both ACCL0001 and MAGN0001. As we can only ever register an
i2c client for one of them, ignore MAGN0001.
Currently this errors:
i2c i2c-4: Failed to register i2c client MAGN0001:00 at 0x1d (-16)
Tested on a Lenovo Yoga Tablet 2 1051-F.
Signed-off-by: Marius Hoch <mail@mariushoch.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The CPR3 power resource on the Toshiba Click Mini toggles a GPIO
which is called SISP (for SIS touchscreen power?) on/off.
This CPR3 power resource is not listed in any _PR? lists, let alone
in a _PR0 list for the SIS0817 touchscreen ACPI device which needs it.
Before commit a1224f34d72a ("ACPI: PM: Check states of power resources
during initialization") this was not an issue because since nothing
referenced the CPR3 power resource its state was always
ACPI_POWER_RESOURCE_STATE_UNKNOWN and power resources with this state
get ignored by acpi_turn_off_unused_power_resources().
This clearly is a bug in the DSDT of this device. Add a DMI quirk
to make acpi_turn_off_unused_power_resources() a no-op on this
model to fix the touchscreen no longer working since kernel 5.16 .
This quirk also causes 2 other power resources to not get turned
off, but the _OFF method on these already was a no-op, so this makes
no difference for the other 2 power resources.
Fixes: a1224f34d72a ("ACPI: PM: Check states of power resources during initialization")
Reported-by: Gé Koerkamp <ge.koerkamp@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216946
Link: https://lore.kernel.org/regressions/32a14a8a-9795-4c8c-7e00-da9012f548f8@leemhuis.info/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The device provides 6 channels which can be individually
turned off and on but groups of two channels share a common brightness
register.
Limitation: The GPIO to enable the device is not used yet.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230419111806.1100437-3-andreas@kemnade.info
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Convert Qcom IOMMU, Amlogic timer, Freescale sec-v4.0, Toshiba
TC358764 display bridge, Parade PS8622 display bridge, and Xilinx
FPGA bindings to DT schema format
- Add qdu1000 and sa8775p SoC support to Qcom PDC interrupt
controller
- Add MediaTek MT8365 UART and SYSIRQ bindings
- Add Arm Cortex-A78C and X1C core compatibles
- Add vendor prefix for Novatek
- Remove bindings for stih415, sti416, stid127 platforms
- Drop uneeded quotes in schema files. This is preparation for
yamllint checking quoting for us.
- Add missing (unevaluated|additional)Properties constraints on child
node schemas
- Clean-up schema comments formatting
- Fix I2C and SPI node bus names in schema examples
- Clean-up some display compatibles schema syntax
- Fix incorrect references to lvds.yaml
- Gather all cache controller bindings in a common directory
DT core:
- Convert unittest to new void .remove platform device hook
- kerneldoc fixes for DT address of_pci_range_to_resource/
of_address_to_resource functions"
* tag 'devicetree-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (46 commits)
dt-bindings: rng: Drop unneeded quotes
dt-bindings: arm/soc: mediatek: Drop unneeded quotes
dt-bindings: soc: qcom: Drop unneeded quotes
dt-bindings: i2c: samsung: Fix 'deprecated' value
dt-bindings: display: Fix lvds.yaml references
dt-bindings: display: simplify compatibles syntax
dt-bindings: display: mediatek: simplify compatibles syntax
dt-bindings: drm/bridge: ti-sn65dsi86: Fix the video-interfaces.yaml references
dt-bindings: timer: Drop unneeded quotes
dt-bindings: interrupt-controller: qcom,pdc: document qcom,qdu1000-pdc
dt-bindings: interrupt-controller: qcom-pdc: add compatible for sa8775p
dt-bindings: reset: remove stih415/stih416 reset
dt-bindings: net: dwmac: sti: remove stih415/sti416/stid127
dt-bindings: irqchip: sti: remove stih415/stih416 and stid127
dt-bindings: iommu: Convert QCOM IOMMU to YAML
dt-bindings: irqchip: ti,sci-inta: Add optional power-domains property
dt-bindings: Add missing (unevaluated|additional)Properties on child node schemas
of: address: Reshuffle to remove forward declarations
of: address: Fix documented return value of of_pci_range_to_resource()
of: address: Document return value of of_address_to_resource()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Two series:
- Reorganize how the hardware page table objects are managed,
particularly their destruction flow. Increase the selftest test
coverage in this area by creating a more complete mock iommu
driver.
This is preparation to add a replace operation for HWPT binding,
which is done but waiting for the VFIO parts to complete so there
is a user.
- Split the iommufd support for "access" to make it two step -
allocate an access then link it to an IOAS. Update VFIO and have
VFIO always create an access even for the VFIO mdevs that never do
DMA.
This is also preperation for the replace VFIO series that will
allow replace to work on access types as well.
Three minor fixes:
- Sykzaller found the selftest code didn't check for overflow when
processing user VAs
- smatch noted a .data item should have been static
- Add a selftest that reproduces a syzkaller bug for batch carry
already fixed in rc"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (21 commits)
iommufd/selftest: Cover domain unmap with huge pages and access
iommufd/selftest: Set varaiable mock_iommu_device storage-class-specifier to static
vfio: Check the presence for iommufd callbacks in __vfio_register_dev()
vfio/mdev: Uses the vfio emulated iommufd ops set in the mdev sample drivers
vfio-iommufd: Make vfio_iommufd_emulated_bind() return iommufd_access ID
vfio-iommufd: No need to record iommufd_ctx in vfio_device
iommufd: Create access in vfio_iommufd_emulated_bind()
iommu/iommufd: Pass iommufd_ctx pointer in iommufd_get_ioas()
iommufd/selftest: Catch overflow of uptr and length
iommufd/selftest: Add a selftest for iommufd_device_attach() with a hwpt argument
iommufd/selftest: Make selftest create a more complete mock device
iommufd/selftest: Rename the remaining mock device_id's to stdev_id
iommufd/selftest: Rename domain_id to hwpt_id for FIXTURE iommufd_mock_domain
iommufd/selftest: Rename domain_id to stdev_id for FIXTURE iommufd_ioas
iommufd/selftest: Rename the sefltest 'device_id' to 'stdev_id'
iommufd: Make iommufd_hw_pagetable_alloc() do iopt_table_add_domain()
iommufd: Move iommufd_device to iommufd_private.h
iommufd: Move ioas related HWPT destruction into iommufd_hw_pagetable_destroy()
iommufd: Consistently manage hwpt_item
iommufd: Add iommufd_lock_obj() around the auto-domains hwpts
...
|
|
We should not cache deferred file handles if we dont have
handle lease on a file. And we should immediately close all
deferred handles in case of handle lease break.
Fixes: 9e31678fb403 ("SMB3: fix lease break timeout when multiple deferred close handles for the same file.")
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Gareth no longer works for Renesas.
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Acked-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/20230426100925.12063-1-chris.paterson2@renesas.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Phil no longer works for Renesas.
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Acked-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/20230426100832.11945-1-chris.paterson2@renesas.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Gareth no longer works for Renesas.
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Acked-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/20230426100802.11860-1-chris.paterson2@renesas.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Phil no longer works for Renesas.
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Acked-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/20230426100736.11808-1-chris.paterson2@renesas.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
cifs_del_deferred_close function has a critical section which modifies
the deferred close file list. We must acquire deferred_lock before
calling cifs_del_deferred_close function.
Fixes: ca08d0eac020 ("cifs: Fix memory leak on the deferred close")
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Acked-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Pull drm fixes from Dave Airlie:
"A bit out of routine fixes pull for rc1.
There's a build breakage on some platforms due to ttm, this has that
fix + qaic uapi removal + minor panel fixes.
ttm:
- Fix TTM build on archs where PMD_SHIFT is not constant
qaic:
- Revert uAPI from accel/qaic
panel:
- Improve error handling in nt35950
- Fix double unregister in otm8009a when removing the driver"
* tag 'drm-next-2023-04-27' of git://anongit.freedesktop.org/drm/drm:
drm/panel: novatek-nt35950: Only unregister DSI1 if it exists
drm/panel: otm8009a: Set backlight parent to panel device
drm/panel: novatek-nt35950: Improve error handling
drm/ttm: revert "Reduce the number of used allocation orders for TTM pages"
Revert "accel/qaic: Add mhi_qaic_cntl"
|
|
After upgrading build guests to v6.3, rpm started segfaulting for
specific packages, which was bisected to commit 0503ea8f5ba7 ("mm/mmap:
remove __vma_adjust()"). rpm is doing many mremap() operations with file
mappings of its db. The problem is that in vma_merge() case 3 (we merge
with the next vma, expanding it downwards) vm_pgoff is not adjusted as
it should when vm_start changes. As a result the rpm process most likely
sees data from the wrong offset of the file. Fix the vm_pgoff
calculation.
For case 8 this is a non-functional change as the resulting vm_pgoff is
the same.
Reported-and-bisected-by: Jiri Slaby <jirislaby@kernel.org>
Reported-and-tested-by: Fabian Vogt <fvogt@suse.com>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1210903
Fixes: 0503ea8f5ba7 ("mm/mmap: remove __vma_adjust()")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Lenovo ThinkPad P1 Gen 6 laptop has 2 CS35L41 amplifies
on I2C bus connected to Realtek codec.
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230427110452.13787-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge 6.3-devel branch back in order to apply the more Realtek HD-audio
changes cleanly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Geetha sowjanya says:
====================
Macsec fixes for CN10KB
This patch set has fixes for the issues encountered while
testing macsec on CN10KB silicon. Below is the description
of patches:
Patch 1: For each LMAC two MCSX_MCS_TOP_SLAVE_CHANNEL_CFG registers exist
in CN10KB. Bypass has to be disabled in two registers.
Patch 2: Add workaround for errata w.r.t accessing TCAM DATA and MASK registers.
Patch 3: Fixes the parser configuration to allow PTP traffic.
Patch 4: Addresses the IP vector and block level interrupt mask changes.
Patch 5: Fix NULL pointer crashes when rebooting
Patch 6: Since MCS is global block shared by all LMACS the TCAM match
must include macsec DMAC also to distinguish each macsec interface
Patch 7: Before freeing MCS hardware resource to AF clear the stats also.
Patch 8: Stats which share single counter in hardware are tracked in software.
This tracking was based on wrong secy mode params.
Use correct secy mode params
Patch 9: When updating secy mode params, PN number was also reset to
initial values. Hence do not write to PN value register when
updating secy.
====================
Link: https://lore.kernel.org/r/20230426062528.20575-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
After creating SecYs, SCs and SAs a SecY can be modified
to change attributes like validation mode, protect frames
mode etc. During this SecY update, packet number is reset to
initial user given value by mistake. Hence do not reset
PN when updating SecY parameters.
Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Macsec stats like InPktsLate and InPktsDelayed share
same counter in hardware. If SecY replay_protect is true
then counter represents InPktsLate otherwise InPktsDelayed.
This mode change was tracked based on protect_frames
instead of replay_protect mistakenly. Similarly InPktsUnchecked
and InPktsOk share same counter and mode change was tracked
based on validate_check instead of validate_disabled.
This patch fixes those problems.
Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
