summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-07-18kbuild: do not suppress Kconfig prompts for silent buildMasahiro Yamada
When a new CONFIG option is available, Kbuild shows a prompt to get the user input. $ make [ snip ] Core Scheduling for SMT (SCHED_CORE) [N/y/?] (NEW) This is the only interactive place in the build process. Commit 174a1dcc9642 ("kbuild: sink stdout from cmd for silent build") suppressed Kconfig prompts as well because syncconfig is invoked by the 'cmd' macro. You cannot notice the fact that Kconfig is waiting for the user input. Use 'kecho' to show the equivalent short log without suppressing stdout from sub-make. Fixes: 174a1dcc9642 ("kbuild: sink stdout from cmd for silent build") Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
2021-07-18scripts/setlocalversion: fix a bug when LOCALVERSION is emptyMikulas Patocka
The commit 042da426f8eb ("scripts/setlocalversion: simplify the short version part") reduces indentation. Unfortunately, it also changes behavior in a subtle way - if the user has empty "LOCALVERSION" variable, the plus sign is appended to the kernel version. It wasn't appended before. This patch reverts to the old behavior - we append the plus sign only if the LOCALVERSION variable is not set. Fixes: 042da426f8eb ("scripts/setlocalversion: simplify the short version part") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-07-18perf sched: Fix record failure when CONFIG_SCHEDSTATS is not setYang Jihong
The tracepoints trace_sched_stat_{wait, sleep, iowait} are not exposed to user if CONFIG_SCHEDSTATS is not set, "perf sched record" records the three events. As a result, the command fails. Before: #perf sched record sleep 1 event syntax error: 'sched:sched_stat_wait' \___ unknown tracepoint Error: File /sys/kernel/tracing/events/sched/sched_stat_wait not found. Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?. Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events Solution: Check whether schedstat tracepoints are exposed. If no, these events are not recorded. After: # perf sched record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.163 MB perf.data (1091 samples) ] # perf sched report run measurement overhead: 4736 nsecs sleep measurement overhead: 9059979 nsecs the run test took 999854 nsecs the sleep test took 8945271 nsecs nr_run_events: 716 nr_sleep_events: 785 nr_wakeup_events: 0 ... ------------------------------------------------------------ Fixes: 2a09b5de235a6 ("sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set") Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Yafang Shao <laoar.shao@gmail.com> Link: http://lore.kernel.org/lkml/20210713112358.194693-1-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-18perf probe: Fix add event failure when running 32-bit perf in a 64-bit kernelYang Jihong
The "address" member of "struct probe_trace_point" uses long data type. If kernel is 64-bit and perf program is 32-bit, size of "address" variable is 32 bits. As a result, upper 32 bits of address read from kernel are truncated, an error occurs during address comparison in kprobe_warn_out_range(). Before: # perf probe -a schedule schedule is out of .text, skip it. Error: Failed to add events. Solution: Change data type of "address" variable to u64 and change corresponding address printing and value assignment. After: # perf.new.new probe -a schedule Added new event: probe:schedule (on schedule) You can now use it in all perf tools, such as: perf record -e probe:schedule -aR sleep 1 # perf probe -l probe:schedule (on schedule@kernel/sched/core.c) # perf record -e probe:schedule -aR sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.156 MB perf.data (1366 samples) ] # perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 1K of event 'probe:schedule' # Event count (approx.): 1366 # # Overhead Command Shared Object Symbol # ........ ............... ................. ............ # 6.22% migration/0 [kernel.kallsyms] [k] schedule 6.22% migration/1 [kernel.kallsyms] [k] schedule 6.22% migration/2 [kernel.kallsyms] [k] schedule 6.22% migration/3 [kernel.kallsyms] [k] schedule 6.15% migration/10 [kernel.kallsyms] [k] schedule 6.15% migration/11 [kernel.kallsyms] [k] schedule 6.15% migration/12 [kernel.kallsyms] [k] schedule 6.15% migration/13 [kernel.kallsyms] [k] schedule 6.15% migration/14 [kernel.kallsyms] [k] schedule 6.15% migration/15 [kernel.kallsyms] [k] schedule 6.15% migration/4 [kernel.kallsyms] [k] schedule 6.15% migration/5 [kernel.kallsyms] [k] schedule 6.15% migration/6 [kernel.kallsyms] [k] schedule 6.15% migration/7 [kernel.kallsyms] [k] schedule 6.15% migration/8 [kernel.kallsyms] [k] schedule 6.15% migration/9 [kernel.kallsyms] [k] schedule 0.22% rcu_sched [kernel.kallsyms] [k] schedule ... # # (Cannot load tips.txt file, please install perf!) # Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jianlin Lv <jianlin.lv@arm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Li Huafei <lihuafei1@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lore.kernel.org/lkml/20210715063723.11926-1-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-18perf data: Close all files in close_dir()Riccardo Mancini
When using 'perf report' in directory mode, the first file is not closed on exit, causing a memory leak. The problem is caused by the iterating variable never reaching 0. Fixes: 145520631130bd64 ("perf data: Add perf_data__(create_dir|close_dir) functions") Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zhen Lei <thunder.leizhen@huawei.com> Link: http://lore.kernel.org/lkml/20210716141122.858082-1-rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-18perf probe-file: Delete namelist in del_events() on the error pathRiccardo Mancini
ASan reports some memory leaks when running: # perf test "42: BPF filter" This second leak is caused by a strlist not being dellocated on error inside probe_file__del_events. This patch adds a goto label before the deallocation and makes the error path jump to it. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: e7895e422e4da63d ("perf probe: Split del_perf_probe_events()") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/174963c587ae77fa108af794669998e4ae558338.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-17Merge tag 'soc-fixes-5.14-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Here are the patches for this week that came as the fallout of the merge window: - Two fixes for the NVidia memory controller driver - multiple defconfig files get patched to turn CONFIG_FB back on after that is no longer selected by CONFIG_DRM - ffa and scmpi firmware drivers fixes, mostly addressing compiler and documentation warnings - Platform specific fixes for device tree files on ASpeed, Renesas and NVidia SoC, mostly for recent regressions. - A workaround for a regression on the USB PHY with devlink when the usb-nop-xceiv driver is not available until the rootfs is mounted. - Device tree compiler warnings in Arm Versatile-AB" * tag 'soc-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits) ARM: dts: versatile: Fix up interrupt controller node names ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in ARM: configs: Update u8500_defconfig ARM: configs: Update Vexpress defconfig ARM: configs: Update Versatile defconfig ARM: configs: Update RealView defconfig ARM: configs: Update Integrator defconfig arm: Typo s/PCI_IXP4XX_LEGACY/IXP4XX_PCI_LEGACY/ firmware: arm_scmi: Fix range check for the maximum number of pending messages firmware: arm_scmi: Avoid padding in sensor message structure firmware: arm_scmi: Fix kernel doc warnings about return values firmware: arm_scpi: Fix kernel doc warnings firmware: arm_scmi: Fix kernel doc warnings ARM: shmobile: defconfig: Restore graphical consoles firmware: arm_ffa: Fix a possible ffa_linux_errmap buffer overflow firmware: arm_ffa: Fix the comment style firmware: arm_ffa: Simplify probe function firmware: arm_ffa: Ensure drivers provide a probe function firmware: arm_scmi: Fix possible scmi_linux_errmap buffer overflow firmware: arm_scmi: Ensure drivers provide a probe function ...
2021-07-17Revert "mm/slub: use stackdepot to save stack trace in objects"Linus Torvalds
This reverts commit 788691464c29455346dc613a3b43c2fb9e5757a4. It's not clear why, but it causes unexplained problems in entirely unrelated xfs code. The most likely explanation is some slab corruption, possibly triggered due to CONFIG_SLUB_DEBUG_ON. See [1]. It ends up having a few other problems too, like build errors on arch/arc, and Geert reporting it using much more memory on m68k [3] (it probably does so elsewhere too, but it is probably just more noticeable on m68k). The architecture issues (both build and memory use) are likely just because this change effectively force-enabled STACKDEPOT (along with a very bad default value for the stackdepot hash size). But together with the xfs issue, this all smells like "this commit was not ready" to me. Link: https://lore.kernel.org/linux-xfs/YPE3l82acwgI2OiV@infradead.org/ [1] Link: https://lore.kernel.org/lkml/202107150600.LkGNb4Vb-lkp@intel.com/ [2] Link: https://lore.kernel.org/lkml/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXEhCvbZyA@mail.gmail.com/ [3] Reported-by: Christoph Hellwig <hch@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-17Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "One core fix for an oops which can occur if the error handling thread fails to start for some reason and the driver is removed. The other fixes are all minor ones in drivers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Add missing host_lock in ufshcd_vops_setup_xfer_req() scsi: mpi3mr: Fix W=1 compilation warnings scsi: pm8001: Clean up kernel-doc and comments scsi: zfcp: Report port fc_security as unknown early during remote cable pull scsi: core: Fix bad pointer dereference when ehandler kthread is invalid scsi: fas216: Fix a build error scsi: core: Fix the documentation of the scsi_execute() time parameter
2021-07-17igmp: Add ip_mc_list lock in ip_check_mc_rcuLiu Jian
I got below panic when doing fuzz test: Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 4056 Comm: syz-executor.3 Tainted: G B 5.14.0-rc1-00195-gcff5c4254439-dirty #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack_lvl+0x7a/0x9b panic+0x2cd/0x5af end_report.cold+0x5a/0x5a kasan_report+0xec/0x110 ip_check_mc_rcu+0x556/0x5d0 __mkroute_output+0x895/0x1740 ip_route_output_key_hash_rcu+0x2d0/0x1050 ip_route_output_key_hash+0x182/0x2e0 ip_route_output_flow+0x28/0x130 udp_sendmsg+0x165d/0x2280 udpv6_sendmsg+0x121e/0x24f0 inet6_sendmsg+0xf7/0x140 sock_sendmsg+0xe9/0x180 ____sys_sendmsg+0x2b8/0x7a0 ___sys_sendmsg+0xf0/0x160 __sys_sendmmsg+0x17e/0x3c0 __x64_sys_sendmmsg+0x9e/0x100 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x462eb9 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f3df5af1c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462eb9 RDX: 0000000000000312 RSI: 0000000020001700 RDI: 0000000000000007 RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f3df5af26bc R13: 00000000004c372d R14: 0000000000700b10 R15: 00000000ffffffff It is one use-after-free in ip_check_mc_rcu. In ip_mc_del_src, the ip_sf_list of pmc has been freed under pmc->lock protection. But access to ip_sf_list in ip_check_mc_rcu is not protected by the lock. Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-17Merge tag '5.14-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "Eight cifs/smb3 fixes, including three for stable. Three are DFS related fixes, and two to fix problems pointed out by static checkers" * tag '5.14-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: do not share tcp sessions of dfs connections SMB3.1.1: fix mount failure to some servers when compression enabled cifs: added WARN_ON for all the count decrements cifs: fix missing null session check in mount cifs: handle reconnect of tcon when there is no cached dfs referral cifs: fix the out of range assignment to bit fields in parse_server_interfaces cifs: Do not use the original cruid when following DFS links for multiuser mounts cifs: use the expiry output of dns_query to schedule next resolution
2021-07-17Merge tag 'linux-kselftest-kunit-fixes-5.14-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit fixes from Shuah Khan: "Fixes to kunit tool and documentation: - fix asserts on older python versions - fixes to misleading error messages when TAP header format is incorrect or when file is missing - documentation fix: drop obsolete information about uml_abort coverage - remove unnecessary annotations" * tag 'linux-kselftest-kunit-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: tool: Assert the version requirement kunit: tool: remove unnecessary "annotations" import Documentation: kunit: drop obsolete note about uml_abort for coverage kunit: tool: Fix error messages for cases of no tests and wrong TAP header
2021-07-17Merge tag 'linux-kselftest-fixes-5.14-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fix from Shuah Khan: "A fix to memory-hotplug hot-remove test to stop spamming logs with dump_page() entries and slowing the system down to a crawl" * tag 'linux-kselftest-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: memory-hotplug: avoid spamming logs with dump_page(), ratio limit hot-remove error test
2021-07-17Merge tag 'trace-v5.14-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Fix the histogram logic from possibly crashing the kernel Working on the histogram code, I found that if you dereference a char pointer in a trace event that happens to point to user space, it can crash the kernel, as it does no checks of that pointer. I have code coming that will do this better, so just remove this ability to treat character pointers in trace events as stings in the histogram" * tag 'trace-v5.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Do not reference char * as a string in histograms
2021-07-16Merge tag 'devicetree-fixes-for-5.14-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Drop 'resets' as required on renesas,du - Moving of fixed string patterns for 'properties' instead of 'patternProperties' - Drop more redundant minItems/maxItems that we merged in the merge window - Indentation warning fix for sja1105 * tag 'devicetree-fixes-for-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: display: renesas,du: Make resets optional on R-Car H1 dt-bindings: Move fixed string 'patternProperties' to 'properties' dt-bindings: More dropping redundant minItems/maxItems dt-bindings: net: dsa: sja1105: Fix indentation warnings
2021-07-16Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "The bulk of the diffstat consists of changes to our uaccess routines so that they fall back to bytewise copying prior to reporting complete failure when the initial (multi-byte) access faults. However, the most disappointing change here is that we've had to bump ARCH_DMA_MINALIGN back to 128 bytes thanks to Qualcomm's "Kryo" CPU, which ended up in the MSM8996 mobile SoC. Still, at least we're now aware of this design and one of the hardware designers confirmed the L2 cacheline size for us. Summary: - Fix instrumentation annotations for entry code - Ensure kernel MTE state is restored correctly on resume from suspend - Fix MTE fault from new strlen() routine - Fallback to byte-wise accesses on initial uaccess fault - Bump Clang requirement for BTI - Revert ARCH_DMA_MINALIGN back to 128 bytes (shakes fist at Qualcomm)" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: entry: fix KCOV suppression arm64: entry: add missing noinstr arm64: mte: fix restoration of GCR_EL1 from suspend arm64: Avoid premature usercopy failure arm64: Restrict ARM64_BTI_KERNEL to clang 12.0.0 and newer Revert "arm64: cache: Lower ARCH_DMA_MINALIGN to 64 (L1_CACHE_BYTES)" arm64: Add missing header <asm/smp.h> in two files arm64: fix strlen() with CONFIG_KASAN_HW_TAGS
2021-07-16Merge branch 'vmxnet3-version-6'David S. Miller
Ronak Doshi says: ==================== vmxnet3: upgrade to version 6 vmxnet3 emulation has recently added several new features which includes increase in queues supported, remove power of 2 limitation on queues, add RSS for ESP IPv6, etc. This patch series extends the vmxnet3 driver to leverage these new features. Compatibility is maintained using existing vmxnet3 versioning mechanism as follows: - new features added to vmxnet3 emulation are associated with new vmxnet3 version viz. vmxnet3 version 6. - emulation advertises all the versions it supports to the driver. - during initialization, vmxnet3 driver picks the highest version number supported by both the emulation and the driver and configures emulation to run at that version. In particular, following changes are introduced: Patch 1: This patch introduces utility macros for vmxnet3 version 6 comparison and updates Copyright information. Patch 2: This patch adds support to increase maximum Tx/Rx queues from 8 to 32. Patch 3: This patch removes the limitation of power of 2 on the queues. Patch 4: Uses existing get_rss_hash_opts and set_rss_hash_opts methods to add support for ESP IPv6 RSS. Patch 5: This patch reports correct RSS hash type based on the type of RSS performed. Patch 6: This patch updates maximum configurable mtu to 9190. Patch 7: With all vmxnet3 version 6 changes incorporated in the vmxnet3 driver, with this patch, the driver can configure emulation to run at vmxnet3 version 6. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-16vmxnet3: update to version 6Ronak Doshi
With all vmxnet3 version 6 changes incorporated in the vmxnet3 driver, the driver can configure emulation to run at vmxnet3 version 6, provided the emulation advertises support for version 6. Signed-off-by: Ronak Doshi <doshir@vmware.com> Acked-by: Guolin Yang <gyang@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-16vmxnet3: increase maximum configurable mtu to 9190Ronak Doshi
This patch increases the maximum configurable mtu to 9190 to accommodate jumbo packets of overlay traffic. Signed-off-by: Ronak Doshi <doshir@vmware.com> Acked-by: Guolin Yang <gyang@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-16vmxnet3: set correct hash type based on rss informationRonak Doshi
As vmxnet3 supports IP/TCP/UDP RSS, this patch sets appropriate hash type based on the type of RSS performed. Signed-off-by: Ronak Doshi <doshir@vmware.com> Acked-by: Guolin Yang <gyang@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-16vmxnet3: add support for ESP IPv6 RSSRonak Doshi
Vmxnet3 version 4 added support for ESP RSS. However, only IPv4 was supported. With vmxnet3 version 6, this patch enables RSS for ESP IPv6 packets as well. Signed-off-by: Ronak Doshi <doshir@vmware.com> Acked-by: Guolin Yang <gyang@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-16vmxnet3: remove power of 2 limitation on the queuesRonak Doshi
With version 6, vmxnet3 relaxes the restriction on queues to be power of two. This is helpful in cases (Edge VM) where vcpus are less than 8 and device requires more than 4 queues. Signed-off-by: Ronak Doshi <doshir@vmware.com> Acked-by: Guolin Yang <gyang@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-16vmxnet3: add support for 32 Tx/Rx queuesRonak Doshi
Currently, vmxnet3 supports maximum of 8 Tx/Rx queues. With increase in number of vcpus on a VM, to achieve better performance and utilize idle vcpus, we need to increase the max number of queues supported. This patch enhances vmxnet3 to support maximum of 32 Tx/Rx queues. Increasing the Rx queues also increases the probability of distrubuting the traffic from different flows to different queues with RSS. Signed-off-by: Ronak Doshi <doshir@vmware.com> Acked-by: Guolin Yang <gyang@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-16vmxnet3: prepare for version 6 changesRonak Doshi
vmxnet3 is currently at version 4 and this patch initiates the preparation to accommodate changes for upto version 6. Introduced utility macros for vmxnet3 version 6 comparison and update Copyright information. Signed-off-by: Ronak Doshi <doshir@vmware.com> Acked-by: Guolin Yang <gyang@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-16tipc: keep the skb in rcv queue until the whole data is readXin Long
Currently, when userspace reads a datagram with a buffer that is smaller than this datagram, the data will be truncated and only part of it can be received by users. It doesn't seem right that users don't know the datagram size and have to use a huge buffer to read it to avoid the truncation. This patch to fix it by keeping the skb in rcv queue until the whole data is read by users. Only the last msg of the datagram will be marked with MSG_EOR, just as TCP/SCTP does. Note that this will work as above only when MSG_EOR is set in the flags parameter of recvmsg(), so that it won't break any old user applications. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-16Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tDavid S. Miller
nguy/next-queue Tony Nguyen says: ==================== 1GbE Intel Wired LAN Driver Updates 2021-07-16 Vinicius Costa Gomes says: Add support for steering traffic to specific RX queues using Flex Filters. As the name implies, Flex Filters are more flexible than using Layer-2, VLAN or MAC address filters, one of the reasons is that they allow "AND" operations more easily, e.g. when the user wants to steer some traffic based on the source MAC address and the packet ethertype. Future work include adding support for offloading tc-u32 filters to the hardware. The series is divided as follows: Patch 1/5, add the low level primitives for configuring Flex filters. Patch 2/5 and 3/5, allow ethtool to manage Flex filters. Patch 4/5, when specifying filters that have multiple predicates, use Flex filters. Patch 5/5, Adds support for exposing the i225 LEDs using the LED subsystem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-16bonding: fix build issueMahesh Bandewar
The commit 9a5605505d9c (" bonding: Add struct bond_ipesc to manage SA") is causing following build error when XFRM is not selected in kernel config. lld: error: undefined symbol: xfrm_dev_state_flush >>> referenced by bond_main.c:3453 (drivers/net/bonding/bond_main.c:3453) >>> net/bonding/bond_main.o:(bond_netdev_event) in archive drivers/built-in.a Fixes: 9a5605505d9c (" bonding: Add struct bond_ipesc to manage SA") Signed-off-by: Mahesh Bandewar <maheshb@google.com> CC: Taehee Yoo <ap420073@gmail.com> CC: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-16igc: Export LEDsKurt Kanzenbach
Each i225 has three LEDs. Export them via the LED class framework. Each LED is controllable via sysfs. Example: $ cd /sys/class/leds/igc_led0 $ cat brightness # Current Mode $ cat max_brightness # 15 $ echo 0 > brightness # Mode 0 $ echo 1 > brightness # Mode 1 The brightness field here reflects the different LED modes ranging from 0 to 15. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-16igc: Make flex filter more flexibleKurt Kanzenbach
Currently flex filters are only used for filters containing user data. However, it makes sense to utilize them also for filters having multiple conditions, because that's not supported by the driver at the moment. Add it. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-16igc: Allow for Flex Filters to be installedVinicius Costa Gomes
Allows Flex Filters to be installed. The previous restriction to the types of filters that can be installed can now be lifted. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-16igc: Integrate flex filter into ethtool opsKurt Kanzenbach
Use the flex filter mechanism to extend the current ethtool filter operations by intercoperating the user data. This allows to match eight more bytes within a Ethernet frame in addition to macs, ether types and vlan. The matching pattern looks like this: * dest_mac [6] * src_mac [6] * tpid [2] * vlan tci [2] * ether type [2] * user data [8] This can be used to match Profinet traffic classes by FrameID range. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-16igc: Add possibility to add flex filterKurt Kanzenbach
The Intel i225 NIC has the possibility to add flex filters which can match up to the first 128 byte of a packet. These filters are useful for all kind of packet matching. One particular use case is Profinet, as the different traffic classes are distinguished by the frame id range which cannot be matched by any other means. Add code to configure and enable flex filters. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-16net: decnet: Fix sleeping inside in af_decnetYajun Deng
The release_sock() is blocking function, it would change the state after sleeping. use wait_woken() instead. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-16ARM: dts: versatile: Fix up interrupt controller node namesSudeep Holla
Once the new schema interrupt-controller/arm,vic.yaml is added, we get the below warnings: arch/arm/boot/dts/versatile-ab.dt.yaml: intc@10140000: $nodename:0: 'intc@10140000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' arch/arm/boot/dts/versatile-ab.dt.yaml: intc@10140000: 'clear-mask' does not match any of the regexes Fix the node names for the interrupt controller to conform to the standard node name interrupt-controller@.. Also drop invalid clear-mask property. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210701132118.759454-1-sudeep.holla@arm.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-16Merge tag 'aspeed-5.14-devicetree-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/fixes ASPEED device tree fixes for 5.14 - eMMC phase corrections so Tacoma and Everest can boot - VUART irq polarity fix for e3c246d4i, using new bindings - I2C address fix for Rainier power supply - GPIO line name fixes * tag 'aspeed-5.14-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed: everest: PSU #3 address change ARM: dts: everest: Add phase corrections for eMMC ARM: dts: tacoma: Add phase corrections for eMMC ARM: dts: aspeed: Update e3c246d4i vuart properties ARM: dts: aspeed: Fix AST2600 machines line names Link: https://lore.kernel.org/r/CACPK8XefdPzeOUDnDgk9cHQEs-9wF_ZSPdYQRzuNOpGZTyGUKQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-16ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-inStefan Wahren
The usage of usb-nop-xceiv PHY on Raspberry Pi boards with BCM283x has been a "regression source" a lot of times. The last case is breakage of USB mass storage boot has been commit e590474768f1 ("driver core: Set fw_devlink=on by default") for multi_v7_defconfig. As long as NOP_USB_XCEIV is configured as module, the dwc2 USB driver defer probing endlessly and prevent booting from USB mass storage device. So make the driver built-in as in bcm2835_defconfig and arm64/defconfig. Fixes: e590474768f1 ("driver core: Set fw_devlink=on by default") Reported-by: Ojaswin Mujoo <ojaswin98@gmail.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1625915095-23077-1-git-send-email-stefan.wahren@i2se.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-16ARM: configs: Update u8500_defconfigLinus Walleij
The platform lost the framebuffer due to a commit solving a circular dependency in v5.14-rc1, so add it back in by explicitly selecting the framebuffer. The U8500 has also gained a few systems using touchscreens from Cypress, Melfas and Zinitix so add these at the same time as we're updating the defconfig anyway. Fixes: f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: phone-devel@vger.kernel.org Cc: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Stephan Gerhold <stephan@gerhold.net> Cc: newbyte@disroot.org Link: https://lore.kernel.org/r/20210712085522.672482-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-16ARM: configs: Update Vexpress defconfigLinus Walleij
This updates the Versatile Express defconfig for the changes in the v5.14-rc1 kernel: - The Framebuffer CONFIG_FB needs to be explicitly selected or we don't get any framebuffer anymore. DRM has stopped to select FB because of circular dependency. - CONFIG_CMA options were moved around. - CONFIG_MODULES options were moved around. - CONFIG_CRYPTO_HW was moved around. Fixes: f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Cc: Kees Cook <keescook@chromium.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20210713133708.94397-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-16ARM: configs: Update Versatile defconfigLinus Walleij
This updates the Versatile defconfig for the changes in the v5.14-rc1 kernel: - The Framebuffer CONFIG_FB needs to be explicitly selected or we don't get any framebuffer anymore. DRM has stopped to select FB because of circular dependency. - The CONFIG_FB_MODE_HELPERS are not needed when using DRM framebuffer emulation as DRM does. - The Acorn fonts are removed, the default framebuffer font works fine. I don't know why this was selected in the first place or how the Kconfig was altered so it was removed. Fixes: f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210714081819.139210-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-16ARM: configs: Update RealView defconfigLinus Walleij
This updates the RealView defconfig for the changes in the v5.14-rc1 kernel: - The Framebuffer CONFIG_FB needs to be explicitly selected or we don't get any framebuffer anymore. DRM has stopped to select FB because of circular dependency. - The CONFIG_FB_MODE_HELPERS are not needed when using DRM framebuffer emulation as DRM does. - Drop two unused penguin logos. Fixes: f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210714090040.182381-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-16ARM: configs: Update Integrator defconfigLinus Walleij
This updates the Integrator defconfig for the changes in the v5.14-rc1 kernel: - The Framebuffer CONFIG_FB needs to be explicitly selected or we don't get any framebuffer anymore. DRM has stopped to select FB because of circular dependency. - Drop the unused Matrox FB drivers that are only used with specific PCI cards. Fixes: f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210714122703.212609-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-16Merge tag 'scmi-fixes-5.14' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes ARM SCMI fixes for v5.14 A small set of fixes: - adding check for presence of probe while registering the driver to prevent NULL pointer access - dropping the duplicate check as the driver core already takes care of it - fix for possible scmi_linux_errmap buffer overflow - fix to avoid sensor message structure padding - fix the range check for the maximum number of pending SCMI messages - fix for various kernel-doc warnings * tag 'scmi-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Fix range check for the maximum number of pending messages firmware: arm_scmi: Avoid padding in sensor message structure firmware: arm_scmi: Fix kernel doc warnings about return values firmware: arm_scpi: Fix kernel doc warnings firmware: arm_scmi: Fix kernel doc warnings firmware: arm_scmi: Fix possible scmi_linux_errmap buffer overflow firmware: arm_scmi: Ensure drivers provide a probe function firmware: arm_scmi: Simplify device probe function on the bus Link: https://lore.kernel.org/r/20210714165831.2617437-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-16Merge tag 'arm-ffa-fixes-5.14' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm FF-A fixes for v5.14 A small set of fixes: - adding check for presence of probe while registering the driver to prevent NULL pointer access - dropping the duplicate check as the driver core already takes care of it - fixing possible ffa_linux_errmap buffer overflow and - fixing kernel-doc warning for comment style * tag 'arm-ffa-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_ffa: Fix a possible ffa_linux_errmap buffer overflow firmware: arm_ffa: Fix the comment style firmware: arm_ffa: Simplify probe function firmware: arm_ffa: Ensure drivers provide a probe function Link: https://lore.kernel.org/r/20210714165806.2617325-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-16arm: Typo s/PCI_IXP4XX_LEGACY/IXP4XX_PCI_LEGACY/Geert Uytterhoeven
Kconfig symbol PCI_IXP4XX_LEGACY does not exist, but IXP4XX_PCI_LEGACY does. Fixes: d5d9f7ac58ea1041 ("ARM/ixp4xx: Make NEED_MACH_IO_H optional") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/82ce37c617293521f095a945a255456b9512769c.1626255077.git.geert+renesas@glider.be' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-16Merge tag 'tegra-for-5.14-arm64-dt-fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes arm64: tegra: Device tree fixes for v5.14-rc1 This contains two late fixes for Tegra194 device tree files to restore USB and audio functionality after enabling system-wide IOMMU support. * tag 'tegra-for-5.14-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Enable SMMU support for USB on Tegra194 arm64: tegra: Enable audio IOMMU support on Tegra194 Link: https://lore.kernel.org/r/20210709150220.2543875-1-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-16Merge tag 'renesas-fixes-for-v5.14-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes Renesas fixes for v5.14 - Fix a clock/reset handling design issue on the new RZ/G2L SoC, requiring an atomic change to DT binding definitions, clock driver, and DTS, - Restore graphical consoles in the shmobile_defconfig. * tag 'renesas-fixes-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: shmobile: defconfig: Restore graphical consoles dt-bindings: clock: r9a07g044-cpg: Update clock/reset definitions clk: renesas: r9a07g044: Add P2 Clock support clk: renesas: r9a07g044: Fix P1 Clock clk: renesas: r9a07g044: Rename divider table clk: renesas: rzg2l: Add multi clock PM support Link: https://lore.kernel.org/r/cover.1626253929.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-16Merge tag 'memory-controller-drv-tegra-5.14-3' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/fixes Memory controller drivers for v5.14 - Tegra SoC, late fixes Two fixes for recent series of changes in Tegra SoC memory controller drivers: 1. Add a stub for tegra_mc_probe_device() to fix compile testing of arm-smmu without TEGRA_MC. 2. Fix arm-smmu dtschema syntax. * tag 'memory-controller-drv-tegra-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: dt-bindings: arm-smmu: Fix json-schema syntax memory: tegra: Add compile-test stub for tegra_mc_probe_device() Link: https://lore.kernel.org/r/20210625073604.13562-1-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-16Merge tag 'docs-5.14-2' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation fixes from Jonathan Corbet: "A handful of fixes in and around documentation. Some funky quotes in LICENSES/dual/CC-BY-4.0 were giving spdxcheck.py grief; that has been fixed on both ends. Also a couple of features updates and one docs build fix" * tag 'docs-5.14-2' of git://git.lwn.net/linux: docs/zh_CN: add a missing space character Documentation/features: Add THREAD_INFO_IN_TASK feature matrix Documentation/features: Update the ARCH_HAS_TICK_BROADCAST entry LICENSES/dual/CC-BY-4.0: Git rid of "smart quotes" scripts/spdxcheck.py: Strictly read license files in utf-8
2021-07-16mt7530 fix mt7530_fdb_write vid missing ivl bitEric Woudstra
According to reference guides mt7530 (mt7620) and mt7531: NOTE: When IVL is reset, MAC[47:0] and FID[2:0] will be used to read/write the address table. When IVL is set, MAC[47:0] and CVID[11:0] will be used to read/write the address table. Since the function only fills in CVID and no FID, we need to set the IVL bit. The existing code does not set it. This is a fix for the issue I dropped here earlier: http://lists.infradead.org/pipermail/linux-mediatek/2021-June/025697.html With this patch, it is now possible to delete the 'self' fdb entry manually. However, wifi roaming still has the same issue, the entry does not get deleted automatically. Wifi roaming also needs a fix somewhere else to function correctly in combination with vlan. Signed-off-by: Eric Woudstra <ericwouds@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-16net: phy: marvell10g: enable WoL for 88X3310 and 88E2110Voon Weifeng
Implement Wake-on-LAN feature for 88X3310 and 88E2110. This is done by enabling WoL interrupt and WoL detection and configuring MAC address into WoL magic packet registers Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Ling Pei Lee <pei.lee.ling@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-19 08:54:35 +0000