summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-09-11Merge branches 'pm-cpuidle' and 'pm-powercap'Rafael J. Wysocki
Merge cpuidle updates and power capping updates for 6.12-rc1: - Add Granite Rapids Xeon support to intel_idle (Artem Bityutskiy). - Disable promotion to C1E on Jasper Lake and Elkhart Lake in intel_idle (Kai-Heng Feng). - Use scoped device node handling to fix missing of_node_put() and simplify walking OF children in the riscv-sbi cpuidle driver (Krzysztof Kozlowski). - Remove dead code from cpuidle_enter_state() (Dhruva Gole). - Change an error pointer to NULL to fix error handling in the intel_rapl power capping driver (Dan Carpenter). - Fix off by one in get_rpi() in the intel_rapl power capping driver (Dan Carpenter). - Add support for ArrowLake-U to the intel_rapl power capping driver (Sumeet Pawnikar). - Fix the energy-pkg event for AMD CPUs in the intel_rapl power capping driver (Dhananjay Ugwekar). - Add support for AMD family 1Ah processors to the intel_rapl power capping driver (Dhananjay Ugwekar). * pm-cpuidle: cpuidle: remove dead code from cpuidle_enter_state() cpuidle: riscv-sbi: Simplify with scoped for each OF child loop cpuidle: riscv-sbi: Use scoped device node handling to fix missing of_node_put intel_idle: Disable promotion to C1E on Jasper Lake and Elkhart Lake intel_idle: add Granite Rapids Xeon support * pm-powercap: powercap: intel_rapl: Change an error pointer to NULL powercap: intel_rapl: Fix off by one in get_rpi() powercap: intel_rapl: Add support for ArrowLake-U platform powercap/intel_rapl: Fix the energy-pkg event for AMD CPUs powercap/intel_rapl: Add support for AMD family 1Ah
2024-09-11Merge branch 'pm-cpufreq'Rafael J. Wysocki
Merge cpufreq updates for 6.12-rc1: - Remove LATENCY_MULTIPLIER from cpufreq (Qais Yousef). - Add support for Granite Rapids and Sierra Forest in OOB mode to the intel_pstate cpufreq driver (Srinivas Pandruvada). - Add basic support for CPU capacity scaling on x86 and make the intel_pstate driver set asymmetric CPU capacity on hybrid systems without SMT (Rafael Wysocki). - Add missing MODULE_DESCRIPTION() macros to the powerpc cpufreq driver (Jeff Johnson). - Several OF related cleanups in cpufreq drivers (Rob Herring). - Enable COMPILE_TEST for ARM drivers (Rob Herrring). - Introduce quirks for syscon failures and use socinfo to get revision for TI cpufreq driver (Dhruva Gole, Nishanth Menon). - Minor cleanups in amd-pstate driver (Anastasia Belova, Dhananjay Ugwekar). - Minor cleanups for loongson, cpufreq-dt and powernv cpufreq drivers (Danila Tikhonov, Huacai Chen, and Liu Jing). - Make amd-pstate validate return of any attempt to update EPP limits, which fixes the masking hardware problems (Mario Limonciello). - Move the calculation of the AMD boost numerator outside of amd-pstate, correcting acpi-cpufreq on systems with preferred cores (Mario Limonciello). - Harden preferred core detection in amd-pstate to avoid potential false positives (Mario Limonciello). - Add extra unit test coverage for mode state machine (Mario Limonciello). - Fix an "Uninitialized variables" issue in amd-pstste (Qianqiang Liu). * pm-cpufreq: (35 commits) cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue cpufreq/amd-pstate-ut: Add test case for mode switches cpufreq/amd-pstate: Export symbols for changing modes amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking` cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore` cpufreq: amd-pstate: Optimize amd_pstate_update_limits() cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator() x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator() x86/amd: Move amd_get_highest_perf() out of amd-pstate ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn ACPI: CPPC: Drop check for non zero perf ratio x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator() ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c cpufreq/amd-pstate: Catch failures for amd_pstate_epp_update_limit() cpufreq: ti-cpufreq: Use socinfo to get revision in AM62 family cpufreq: Fix the cacography in powernv-cpufreq.c cpufreq: ti-cpufreq: Introduce quirks to handle syscon fails appropriately cpufreq: loongson3: Use raw_smp_processor_id() in do_service_request() cpufreq: amd-pstate: add check for cpufreq_cpu_get's return value ...
2024-09-11Merge tag 'amd-pstate-v6.12-2024-09-11' of ↵Rafael J. Wysocki
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux Merge the second round of amd-pstate changes for 6.12 from Mario Limonciello: "* Move the calculation of the AMD boost numerator outside of amd-pstate, correcting acpi-cpufreq on systems with preferred cores * Harden preferred core detection to avoid potential false positives * Add extra unit test coverage for mode state machine" * tag 'amd-pstate-v6.12-2024-09-11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux: cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue cpufreq/amd-pstate-ut: Add test case for mode switches cpufreq/amd-pstate: Export symbols for changing modes amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking` cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore` cpufreq: amd-pstate: Optimize amd_pstate_update_limits() cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator() x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator() x86/amd: Move amd_get_highest_perf() out of amd-pstate ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn ACPI: CPPC: Drop check for non zero perf ratio x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator() ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c
2024-09-11Merge branch 'bpf: Allow skb dynptr for tp_btf'Martin KaFai Lau
Philo Lu says: ==================== This makes bpf_dynptr_from_skb usable for tp_btf, so that we can easily parse skb in tracepoints. This has been discussed in [0], and Martin suggested to use dynptr (instead of helpers like bpf_skb_load_bytes). For safety, skb dynptr shouldn't be used in fentry/fexit. This is achieved by add KF_TRUSTED_ARGS flag in bpf_dynptr_from_skb defination, because pointers passed by tracepoint are trusted (PTR_TRUSTED) while those of fentry/fexit are not. Another problem raises that NULL pointers could be passed to tracepoint, such as trace_tcp_send_reset, and we need to recognize them. This is done by add a "__nullable" suffix in the func_proto of the tracepoint, discussed in [1]. 2 Test cases are added, one for "__nullable" suffix, and the other for using skb dynptr in tp_btf. changelog v2 -> v3 (Andrii Nakryiko): Patch 1: - Remove prog type check in prog_arg_maybe_null() - Add bpf_put_raw_tracepoint() after get() - Use kallsyms_lookup() instead of sprintf("%ps") Patch 2: Add separate test "tp_btf_nullable", and use full failure msg v1 -> v2: - Add "__nullable" suffix support (Alexei Starovoitov) - Replace "struct __sk_buff*" with "void*" in test (Martin KaFai Lau) [0] https://lore.kernel.org/all/20240205121038.41344-1-lulie@linux.alibaba.com/T/ [1] https://lore.kernel.org/all/20240430121805.104618-1-lulie@linux.alibaba.com/T/ ==================== Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-09-11selftests/bpf: Expand skb dynptr selftests for tp_btfPhilo Lu
Add 3 test cases for skb dynptr used in tp_btf: - test_dynptr_skb_tp_btf: use skb dynptr in tp_btf and make sure it is read-only. - skb_invalid_ctx_fentry/skb_invalid_ctx_fexit: bpf_dynptr_from_skb should fail in fentry/fexit. In test_dynptr_skb_tp_btf, to trigger the tracepoint in kfree_skb, test_pkt_access is used for its test_run, as in kfree_skb.c. Because the test process is different from others, a new setup type is defined, i.e., SETUP_SKB_PROG_TP. The result is like: $ ./test_progs -t 'dynptr/test_dynptr_skb_tp_btf' #84/14 dynptr/test_dynptr_skb_tp_btf:OK #84 dynptr:OK #127 kfunc_dynptr_param:OK Summary: 2/1 PASSED, 0 SKIPPED, 0 FAILED $ ./test_progs -t 'dynptr/skb_invalid_ctx_f' #84/85 dynptr/skb_invalid_ctx_fentry:OK #84/86 dynptr/skb_invalid_ctx_fexit:OK #84 dynptr:OK #127 kfunc_dynptr_param:OK Summary: 2/2 PASSED, 0 SKIPPED, 0 FAILED Also fix two coding style nits (change spaces to tabs). Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Link: https://lore.kernel.org/r/20240911033719.91468-6-lulie@linux.alibaba.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-09-11bpf: Allow bpf_dynptr_from_skb() for tp_btfPhilo Lu
Making tp_btf able to use bpf_dynptr_from_skb(), which is useful for skb parsing, especially for non-linear paged skb data. This is achieved by adding KF_TRUSTED_ARGS flag to bpf_dynptr_from_skb and registering it for TRACING progs. With KF_TRUSTED_ARGS, args from fentry/fexit are excluded, so that unsafe progs like fexit/__kfree_skb are not allowed. We also need the skb dynptr to be read-only in tp_btf. Because may_access_direct_pkt_data() returns false by default when checking bpf_dynptr_from_skb, there is no need to add BPF_PROG_TYPE_TRACING to it explicitly. Suggested-by: Martin KaFai Lau <martin.lau@linux.dev> Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/r/20240911033719.91468-5-lulie@linux.alibaba.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-09-11tcp: Use skb__nullable in trace_tcp_send_resetPhilo Lu
Replace skb with skb__nullable as the argument name. The suffix tells bpf verifier through btf that the arg could be NULL and should be checked in tp_btf prog. For now, this is the only nullable argument in tcp tracepoints. Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20240911033719.91468-4-lulie@linux.alibaba.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-09-11selftests/bpf: Add test for __nullable suffix in tp_btfPhilo Lu
Add a tracepoint with __nullable suffix in bpf_testmod, and add cases for it: $ ./test_progs -t "tp_btf_nullable" #406/1 tp_btf_nullable/handle_tp_btf_nullable_bare1:OK #406/2 tp_btf_nullable/handle_tp_btf_nullable_bare2:OK #406 tp_btf_nullable:OK Summary: 1/2 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Link: https://lore.kernel.org/r/20240911033719.91468-3-lulie@linux.alibaba.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-09-11bpf: Support __nullable argument suffix for tp_btfPhilo Lu
Pointers passed to tp_btf were trusted to be valid, but some tracepoints do take NULL pointer as input, such as trace_tcp_send_reset(). Then the invalid memory access cannot be detected by verifier. This patch fix it by add a suffix "__nullable" to the unreliable argument. The suffix is shown in btf, and PTR_MAYBE_NULL will be added to nullable arguments. Then users must check the pointer before use it. A problem here is that we use "btf_trace_##call" to search func_proto. As it is a typedef, argument names as well as the suffix are not recorded. To solve this, I use bpf_raw_event_map to find "__bpf_trace##template" from "btf_trace_##call", and then we can see the suffix. Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Link: https://lore.kernel.org/r/20240911033719.91468-2-lulie@linux.alibaba.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-09-11cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issueQianqiang Liu
Using uninitialized value "mode2" when calling "amd_pstate_get_mode_string". Set "mode2" to "AMD_PSTATE_DISABLE" by default. Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com> Link: https://lore.kernel.org/r/20240910233923.46470-1-qianqiang.liu@163.com Acked-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11cpufreq/amd-pstate-ut: Add test case for mode switchesMario Limonciello
There is a state machine in the amd-pstate driver utilized for switches for all modes. To make sure that cleanup and setup works properly for each mode add a unit test case that tries all combinations. Reviewed-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11LoongArch: KVM: Add vm migration support for LBT registersBibo Mao
Every vcpu has separate LBT registers. And there are four scr registers, one flags and ftop register for LBT extension. When VM migrates, VMM needs to get LBT registers for every vcpu. Here macro KVM_REG_LOONGARCH_LBT is added for new vcpu lbt register type, the following macro is added to get/put LBT registers. KVM_REG_LOONGARCH_LBT_SCR0 KVM_REG_LOONGARCH_LBT_SCR1 KVM_REG_LOONGARCH_LBT_SCR2 KVM_REG_LOONGARCH_LBT_SCR3 KVM_REG_LOONGARCH_LBT_EFLAGS KVM_REG_LOONGARCH_LBT_FTOP Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-09-11LoongArch: KVM: Add Binary Translation extension supportBibo Mao
Loongson Binary Translation (LBT) is used to accelerate binary translation, which contains 4 scratch registers (scr0 to scr3), x86/ARM eflags (eflags) and x87 fpu stack pointer (ftop). Like FPU extension, here a lazy enabling method is used for LBT. the LBT context is saved/restored on the vcpu context switch path. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-09-11LoongArch: KVM: Add VM feature detection functionBibo Mao
Loongson SIMD Extension (LSX), Loongson Advanced SIMD Extension (LASX) and Loongson Binary Translation (LBT) features are defined in register CPUCFG2. Two kinds of LSX/LASX/LBT feature detection are added here, one is VCPU feature, and the other is VM feature. VCPU feature dection can only work with VCPU thread itself, and requires VCPU thread is created already. So LSX/LASX/LBT feature detection for VM is added also, it can be done even if VM is not created, and also can be done by any threads besides VCPU threads. Here ioctl command KVM_HAS_DEVICE_ATTR is added for VM, and macro KVM_LOONGARCH_VM_FEAT_CTRL is added to check supported feature. And five sub-features relative with LSX/LASX/LBT are added as following: KVM_LOONGARCH_VM_FEAT_LSX KVM_LOONGARCH_VM_FEAT_LASX KVM_LOONGARCH_VM_FEAT_X86BT KVM_LOONGARCH_VM_FEAT_ARMBT KVM_LOONGARCH_VM_FEAT_MIPSBT Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-09-11LoongArch: Revert qspinlock to test-and-set simple lock on VMBibo Mao
Similar with x86, when VM is detected, revert to a simple test-and-set lock to avoid the horrors of queue preemption. Tested on 3C5000 Dual-way machine with 32 cores and 2 numa nodes, test case is kcbench on kernel mainline 6.10, the detailed command is "kcbench --src /root/src/linux" Performance on host machine kernel compile time performance impact Original 150.29 seconds With patch 150.19 seconds almost no impact Performance on virtual machine: 1. 1 VM with 32 vCPUs and 2 numa node, numa node pinned kernel compile time performance impact Original 170.87 seconds With patch 171.73 seconds almost no impact 2. 2 VMs, each VM with 32 vCPUs and 2 numa node, numa node pinned kernel compile time performance impact Original 2362.04 seconds With patch 354.73 seconds +565% Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-09-11cpufreq/amd-pstate: Export symbols for changing modesMario Limonciello
In order to effectively test all mode switch combinations export everything necessarily for amd-pstate-ut to trigger a mode switch. Reviewed-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking`Mario Limonciello
`amd_pstate_prefcore_ranking` reflects the dynamic rankings of a CPU core based on platform conditions. Explicitly include it in the documentation. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore`Mario Limonciello
Explain that the sysfs file represents both preferred core being enabled by the user and supported by the hardware. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11cpufreq: amd-pstate: Optimize amd_pstate_update_limits()Mario Limonciello
Don't take and release the mutex when prefcore isn't present and avoid initialization of variables that will be initially set in the function. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Reviewed-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into ↵Mario Limonciello
amd_get_boost_ratio_numerator() The special case in amd_pstate_highest_perf_set() is the value used for calculating the boost numerator. Merge this into amd_get_boost_ratio_numerator() and then use that to calculate boost ratio. This allows dropping more special casing of the highest perf value. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()Mario Limonciello
AMD systems that support preferred cores will use "166" as their numerator for max frequency calculations instead of "255". Add a function for detecting preferred cores by looking at the highest perf value on all cores. If preferred cores are enabled return 166 and if disabled the value in the highest perf register. As the function will be called multiple times, cache the values for the boost numerator and if preferred cores will be enabled in global variables. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11x86/amd: Move amd_get_highest_perf() out of amd-pstateMario Limonciello
amd_pstate_get_highest_perf() is a helper used to get the highest perf value on AMD systems. It's used in amd-pstate as part of preferred core handling, but applicable for acpi-cpufreq as well. Move it out to cppc handling code as amd_get_highest_perf(). Reviewed-by: Perry Yuan <perry.yuan@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warnMario Limonciello
If the boost ratio isn't calculated properly for the system for any reason this can cause other problems that are non-obvious. Raise all messages to warn instead. Suggested-by: Perry Yuan <Perry.Yuan@amd.com> Reviewed-by: Perry Yuan <perry.yuan@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11ACPI: CPPC: Drop check for non zero perf ratioMario Limonciello
perf_ratio is a u64 and SCHED_CAPACITY_SCALE is a large number. Shifting by one will never have a zero value. Drop the check. Suggested-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.sheoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()Mario Limonciello
The function name is ambiguous because it returns an intermediate value for calculating maximum frequency rather than the CPPC 'Highest Perf' register. Rename the function to clarify its use and allow the function to return errors. Adjust the consumer in acpi-cpufreq to catch errors. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIBMario Limonciello
Checkpath emits the following warning: ``` WARNING: ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP ``` Adjust the code accordingly. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11x86/amd: Move amd_get_highest_perf() from amd.c to cppc.cMario Limonciello
To prepare to let amd_get_highest_perf() detect preferred cores it will require CPPC functions. Move amd_get_highest_perf() to cppc.c to prepare for 'preferred core detection' rework. No functional changes intended. Reviewed-by: Perry Yuan <perry.yuan@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11ASoC: meson: axg-card: fix 'use-after-free'Arseniy Krasnov
Buffer 'card->dai_link' is reallocated in 'meson_card_reallocate_links()', so move 'pad' pointer initialization after this function when memory is already reallocated. Kasan bug report: ================================================================== BUG: KASAN: slab-use-after-free in axg_card_add_link+0x76c/0x9bc Read of size 8 at addr ffff000000e8b260 by task modprobe/356 CPU: 0 PID: 356 Comm: modprobe Tainted: G O 6.9.12-sdkernel #1 Call trace: dump_backtrace+0x94/0xec show_stack+0x18/0x24 dump_stack_lvl+0x78/0x90 print_report+0xfc/0x5c0 kasan_report+0xb8/0xfc __asan_load8+0x9c/0xb8 axg_card_add_link+0x76c/0x9bc [snd_soc_meson_axg_sound_card] meson_card_probe+0x344/0x3b8 [snd_soc_meson_card_utils] platform_probe+0x8c/0xf4 really_probe+0x110/0x39c __driver_probe_device+0xb8/0x18c driver_probe_device+0x108/0x1d8 __driver_attach+0xd0/0x25c bus_for_each_dev+0xe0/0x154 driver_attach+0x34/0x44 bus_add_driver+0x134/0x294 driver_register+0xa8/0x1e8 __platform_driver_register+0x44/0x54 axg_card_pdrv_init+0x20/0x1000 [snd_soc_meson_axg_sound_card] do_one_initcall+0xdc/0x25c do_init_module+0x10c/0x334 load_module+0x24c4/0x26cc init_module_from_file+0xd4/0x128 __arm64_sys_finit_module+0x1f4/0x41c invoke_syscall+0x60/0x188 el0_svc_common.constprop.0+0x78/0x13c do_el0_svc+0x30/0x40 el0_svc+0x38/0x78 el0t_64_sync_handler+0x100/0x12c el0t_64_sync+0x190/0x194 Fixes: 7864a79f37b5 ("ASoC: meson: add axg sound card support") Cc: Stable@vger.kernel.org Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patch.msgid.link/20240911142425.598631-1-avkrasnov@salutedevices.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-11drm/amd/display: Add all planes on CRTC to state for overlay cursorLeo Li
[Why] DC has a special commit path for native cursor, which use the built-in cursor pipe within DCN planes. This update path does not require all enabled planes to be added to the list of surface updates sent to DC. This is not the case for overlay cursor; it uses the same path as MPO commits. This update path requires all enabled planes to be added to the list of surface updates sent to DC. Otherwise, DC will disable planes not inside the list. [How] If overlay cursor is needed, add all planes on the same CRTC as this cursor to the atomic state. This is already done for non-cursor planes (MPO), just before the added lines. Fixes: 1b04dcca4fb1 ("drm/amd/display: Introduce overlay cursor mode") Closes: https://lore.kernel.org/lkml/f68020a3-c413-482d-beb2-5432d98a1d3e@amd.com Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 0c8c5bdd7eaf291b6f727e98506fb68acee3a4cc)
2024-09-11bpf, cpumap: Move xdp:xdp_cpumap_kthread tracepoint before rcvDaniel Xu
cpumap takes RX processing out of softirq and onto a separate kthread. Since the kthread needs to be scheduled in order to run (versus softirq which does not), we can theoretically experience extra latency if the system is under load and the scheduler is being unfair to us. Moving the tracepoint to before passing the skb list up the stack allows users to more accurately measure enqueue/dequeue latency introduced by cpumap via xdp:xdp_cpumap_enqueue and xdp:xdp_cpumap_kthread tracepoints. f9419f7bd7a5 ("bpf: cpumap add tracepoints") which added the tracepoints states that the intent behind them was for general observability and for a feedback loop to see if the queues are being overwhelmed. This change does not mess with either of those use cases but rather adds a third one. Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Link: https://lore.kernel.org/bpf/47615d5b5e302e4bd30220473779e98b492d47cd.1725585718.git.dxu@dxuuu.xyz
2024-09-11selftests/xsk: Read current MAX_SKB_FRAGS from sysctl knobMaciej Fijalkowski
Currently, xskxceiver assumes that MAX_SKB_FRAGS value is always 17 which is not true - since the introduction of BIG TCP this can now take any value between 17 to 45 via CONFIG_MAX_SKB_FRAGS. Adjust the TOO_MANY_FRAGS test case to read the currently configured MAX_SKB_FRAGS value by reading it from /proc/sys/net/core/max_skb_frags. If running system does not provide that sysctl file then let us try running the test with a default value. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20240910124129.289874-1-maciej.fijalkowski@intel.com
2024-09-11ASoC: codecs: avoid possible garbage value in peb2466_reg_read()Su Hui
Clang static checker (scan-build) warning: sound/soc/codecs/peb2466.c:232:8: Assigned value is garbage or undefined [core.uninitialized.Assign] 232 | *val = tmp; | ^ ~~~ When peb2466_read_byte() fails, 'tmp' will have a garbage value. Add a judgemnet to avoid this problem. Fixes: 227f609c7c0e ("ASoC: codecs: Add support for the Infineon PEB2466 codec") Signed-off-by: Su Hui <suhui@nfschina.com> Link: https://patch.msgid.link/20240911115448.277828-1-suhui@nfschina.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-11Merge branch 'lan743x-phylink'David S. Miller
Raju Lakkaraju says: ==================== Add support to PHYLINK for LAN743x/PCI11x1x chips This is the follow-up patch series of https://lkml.iu.edu/hypermail/linux/kernel/2310.2/02078.html Divide the PHYLINK adaptation and SFP modifications into two separate patch series. The current patch series focuses on transitioning the LAN743x driver's PHY support from phylib to phylink. Tested on PCI11010 Rev-1 Evaluation board Change List: ============ V5 -> V6: - Remove the lan743x_find_max_speed( ) function. Not require - Add EEE enable check before calling lan743x_mac_eee_enable( ) function V4 -> V5: - Remove the fixed_phy_unregister( ) function. Not require - Remove the "phydev->eee_enabled" check to update the MAC EEE enable/disable - Call lan743x_mac_eee_enable() with true after update tx_lpi_timer. - Add phy_support_eee() to initialize the EEE flags V3 -> V4: - Add fixed-link patch along with this series. Note: Note: This code was developed by Mr.Russell King Ref: https://lore.kernel.org/netdev/LV8PR11MB8700C786F5F1C274C73036CC9F8E2@LV8PR11MB8700.namprd11.prod.outlook.com/T/#me943adf54f1ea082edf294aba448fa003a116815 - Change phylink fixed-link function header's string from "Returns" to "Returns:" - Remove the EEE private variable from LAN743x adapter strcture and fix the EEE's set/get functions - set the individual caps (i.e. _RGMII, _RGMII_ID, _RGMII_RXID and __RGMII_TXID) replace with phy_interface_set_rgmii( ) function - Change lan743x_set_eee( ) to lan743x_mac_eee_enable( ) V2 -> V3: - Remove the unwanted parens in each of these if() sub-blocks - Replace "to_net_dev(config->dev)" with "netdev". - Add GMII_ID/RGMII_TXID/RGMII_RXID in supported_interfaces - Fix the lan743x_phy_handle_exists( ) return type V1 -> V2: - Fix the Russell King's comments i.e. remove the speed, duplex update in lan743x_phylink_mac_config( ) - pre-March 2020 legacy support has been removed V0 -> V1: - Integrate with Synopsys DesignWare XPCS drivers - Based on external review comments, - Changes made to SGMII interface support only 1G/100M/10M bps speed - Changes made to 2500Base-X interface support only 2.5Gbps speed - Add check for not is_sgmii_en with is_sfp_support_en support - Change the "pci11x1x_strap_get_status" function return type from void to int - Add ethtool phylink wol, eee, pause get/set functions ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-11net: lan743x: Add support to ethtool phylink get and set settingsRaju Lakkaraju
Add support to ethtool phylink functions: - get/set settings like speed, duplex etc - get/set the wake-on-lan (WOL) - get/set the energy-efficient ethernet (EEE) - get/set the pause Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-11net: lan743x: Migrate phylib to phylinkRaju Lakkaraju
Migrate phy support from phylib to phylink. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-11net: lan743x: Create separate Link Speed Duplex state functionRaju Lakkaraju
Create separate Link Speed Duplex (LSD) update state function from lan743x_sgmii_config () to use as subroutine. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-11net: lan743x: Create separate PCS power reset functionRaju Lakkaraju
Create separate PCS power reset function from lan743x_sgmii_config () to use as subroutine. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-11net: phylink: Add phylink_set_fixed_link() to configure fixed link state in ↵Russell King
phylink The function allows for the configuration of a fixed link state for a given phylink instance. This addition is particularly useful for network devices that operate with a fixed link configuration, where the link parameters do not change dynamically. By using `phylink_set_fixed_link()`, drivers can easily set up the fixed link state during initialization or configuration changes. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <linux@armlinux.org.uk> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-11Merge patch series "can: rockchip_canfd: rework delay calculation and ↵Marc Kleine-Budde
decoding of error code register" Marc Kleine-Budde <mkl@pengutronix.de> says: This series updates the delay calculation for the timekeeping delayed work and fixes the decoding of the error code register. Link: https://patch.msgid.link/20240911-can-rockchip_canfd-fixes-v1-0-5ce385b5ab10@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-09-11can: rockchip_canfd: rkcanfd_handle_error_int_reg_ec(): fix decoding of ↵Marc Kleine-Budde
error code register Probably due to a copy/paste error rkcanfd_handle_error_int_reg_ec() checks twice if the RKCANFD_REG_ERROR_CODE_TX_ACK_EOF bit is set in reg_ec. Keep the correct check for RKCANFD_REG_ERROR_CODE_TX_ACK_EOF and remove the superfluous one. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://patch.msgid.link/9a46d10d-e4e3-40a5-8fb6-f4637959f124@stanley.mountain Fixes: ff60bfbaf67f ("can: rockchip_canfd: add driver for Rockchip CAN-FD controller") Link: https://patch.msgid.link/20240911-can-rockchip_canfd-fixes-v1-2-5ce385b5ab10@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-09-11can: rockchip_canfd: rkcanfd_timestamp_init(): rework delay calculationArnd Bergmann
Rework the delay calculation to only require a single 64-bit division. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [mkl: port to on-top of existing 32-bit division fix] Link: https://patch.msgid.link/20240911-can-rockchip_canfd-fixes-v1-1-5ce385b5ab10@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-09-11Merge tag 'riscv-soc-fixes-for-v6.11-final' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes RISC-V soc fixes for v6.11-final StarFive: A fix to return one of the clocks on the JH7110 from 1 GHz to 1.5 GHz Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-soc-fixes-for-v6.11-final' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: starfive: jh7110-common: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz Link: https://lore.kernel.org/r/20240909-hybrid-groovy-601a33b5b309@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11platform: cznic: turris-omnia-mcu: fix HW_RANDOM dependencyArnd Bergmann
There is still a build failure when the rwrng support is in a loadable module but the mcu driver is built-in: arm-linux-gnueabi-ld: drivers/platform/cznic/turris-omnia-mcu-trng.o: in function `omnia_mcu_register_trng': turris-omnia-mcu-trng.c:(.text.omnia_mcu_register_trng+0x11c): undefined reference to `devm_hwrng_register' Change the dependency to explicitly disallow the broken configuration. Fixes: 41bb142a4028 ("platform: cznic: turris-omnia-mcu: Add support for MCU provided TRNG") Reviewed-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/20240909110417.247453-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11can: m_can: m_can_chip_config(): mask timestamp wraparound IRQJake Hamby
On the Microchip SAMA7G54 MPU the IR_TSW (timestamp wraparound) fires at about 1 Hz, but the driver doesn't care about it. Add it to the list of interrupts to disable in m_can_chip_config to reduce unneeded wakeups. Link: https://patch.msgid.link/DM8PR14MB5221D9DD3A7F2130EF161AF7EF9E2@DM8PR14MB5221.namprd14.prod.outlook.com Signed-off-by: Jake Hamby <Jake.Hamby@Teledyne.com> Link: https://patch.msgid.link/20240911-can-m_can-mask-timestamp-wraparound-irq-v1-1-0155b70dc827@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-09-11can: usb: Kconfig: Fix list of devices for esd_usb driverStefan Mätje
The CAN-USB/3-FD was missing on the list of supported devices. Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu> Link: https://patch.msgid.link/20240910170236.2287637-1-stefan.maetje@esd.eu Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-09-11can: Switch back to struct platform_driver::remove()Uwe Kleine-König
After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all can drivers to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://patch.msgid.link/20240909072742.381003-2-u.kleine-koenig@baylibre.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-09-11soundwire: stream: Revert "soundwire: stream: fix programming slave ports ↵Krzysztof Kozlowski
for non-continous port maps" This reverts commit ab8d66d132bc8f1992d3eb6cab8d32dda6733c84 because it breaks codecs using non-continuous masks in source and sink ports. The commit missed the point that port numbers are not used as indices for iterating over prop.sink_ports or prop.source_ports. Soundwire core and existing codecs expect that the array passed as prop.sink_ports and prop.source_ports is continuous. The port mask still might be non-continuous, but that's unrelated. Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com> Closes: https://lore.kernel.org/all/b6c75eee-761d-44c8-8413-2a5b34ee2f98@linux.intel.com/ Fixes: ab8d66d132bc ("soundwire: stream: fix programming slave ports for non-continous port maps") Acked-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20240909164746.136629-1-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-09-11Merge branch 'for-6.11-fixup' into for-linusPetr Mladek
2024-09-10riscv: Disable preemption while handling PR_RISCV_CTX_SW_FENCEI_OFFCharlie Jenkins
The icache will be flushed in switch_to() if force_icache_flush is true, or in flush_icache_deferred() if icache_stale_mask is set. Between setting force_icache_flush to false and calculating the new icache_stale_mask, preemption needs to be disabled. There are two reasons for this: 1. If CPU migration happens between force_icache_flush = false, and the icache_stale_mask is set, an icache flush will not be emitted. 2. smp_processor_id() is used in set_icache_stale_mask() to mark the current CPU as not needing another flush since a flush will have happened either by userspace or by the kernel when performing the migration. smp_processor_id() is currently called twice with preemption enabled which causes a race condition. It allows icache_stale_mask to be populated with inconsistent CPU ids. Resolve these two issues by setting the icache_stale_mask before setting force_icache_flush to false, and using get_cpu()/put_cpu() to obtain the smp_processor_id(). Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Fixes: 6b9391b581fd ("riscv: Include riscv_set_icache_flush_ctx prctl") Link: https://lore.kernel.org/r/20240903-fix_fencei_optimization-v2-1-8025f20171fc@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-09-10drivers: perf: Fix smp_processor_id() use in preemptible codeAlexandre Ghiti
As reported in [1], the use of smp_processor_id() in pmu_sbi_device_probe() must be protected by disabling the preemption, so simple use get_cpu()/put_cpu() instead. Reported-by: Nam Cao <namcao@linutronix.de> Closes: https://lore.kernel.org/linux-riscv/20240820074925.ReMKUPP3@linutronix.de/ [1] Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Tested-by: Nam Cao <namcao@linutronix.de> Fixes: a8625217a054 ("drivers/perf: riscv: Implement SBI PMU snapshot function") Reported-by: Andrea Parri <parri.andrea@gmail.com> Tested-by: Andrea Parri <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/20240826165210.124696-1-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
generated by cgit (git 2.34.1) at 2025-09-19 15:29:54 +0000