summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-08-23ARM: dts: sunxi: Add missing watchdog interruptsMaxime Ripard
The watchdog has an interrupt on all our SoCs, but it wasn't always listed. Add it to the devicetree where it's missing. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-23arm64: dts: allwinner: h6: Add support for RTC and fix the clock treeOndrej Jirman
This patch adds RTC node and fixes the clock properties and nodes to reflect the real clock tree. The device nodes for the internal oscillator and osc32k are removed, as these clocks are now provided by the RTC device. Clock references are fixed accordingly, too. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-23ARM: dts: sun7i: Add CSI0 controllerMaxime Ripard
The CSI controller embedded in the A20 can be supported by our new driver. Let's add it to our DT. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-23arm64: dts: allwinner: a64: Add A64 OlinuXino board (with eMMC)Sunil Mohan Adapa
A64 OLinuXino board from Olimex has three variants with onboard eMMC: A64-OLinuXino-1Ge16GW, A64-OLinuXino-1Ge4GW and A64-OLinuXino-2Ge8G-IND. In addition, there are two variants without eMMC. One without eMMC and one with SPI flash. This suggests the need for separate device tree for the three eMMC variants. This patch has been tested on A64-OLinuXino-1Ge16GW with Linux 5.0 from Debain. Basic benchmarks using Flexible IO Tester show reasonable performance from the eMMC. eMMC - Random Write: 21.3MiB/s eMMC - Sequential Write: 68.2MiB/s SD Card - Random Write: 1690KiB/s SD Card - Sequential Write: 11.0MiB/s Changes: v3: Separate dts for eMMC variants v2: Fix descriptions for VCC and VCCQ Link: https://github.com/armbian/build/commit/174953de1eb09e6aa1ef7075066b573dba625398 Signed-off-by: Martin Ayotte <martinayotte@gmail.com> [sunil@medhas.org Fix descriptions for VCC and VCCQ, separate dts for eMMC] Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org> Tested-by: Sunil Mohan Adapa <sunil@medhas.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-23dt-bindings: arm: sunxi: Add compatible for A64 OlinuXino with eMMCSunil Mohan Adapa
A64 OLinuXino board from Olimex has three variants with onboard eMMC: A64-OLinuXino-1Ge16GW, A64-OLinuXino-1Ge4GW and A64-OLinuXino-2Ge8G-IND. In addition, there are two variants without eMMC. One without eMMC and one with SPI flash. This suggests the need for separate device tree for the three eMMC variants. Add new compatible string to the bindings documentation for the A64 OlinuXino board variant with on-board eMMC. Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-23ARM: dts: v3s: Change the timers compatibleMaxime Ripard
Unlike the A10 that has 6 timers available, the v3s has only three, with only three interrupts. Let's change the compatible to reflect that, and add the missing interrupts. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-23ARM: dts: h3: Change the timers compatibleMaxime Ripard
Unlike the A10 that has 6 timers available, the H3 has only two, with only two interrupts, just like the A23. Let's change the compatible to reflect that. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-23ARM: dts: a83t: Change the timers compatibleMaxime Ripard
Unlike the A10 that has 6 timers available, the A83t has only two, with only two interrupts, just like the A23. Let's change the compatible to reflect that. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-23ARM: dts: a23/a33: Change the timers compatibleMaxime Ripard
Unlike the A10 that has 6 timers available, the A23 and A33 has only two, with only two interrupts. Let's change the compatible to reflect that. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-23ARM: dts: sun6i: Add missing timers interruptsMaxime Ripard
The timer unit in the A31 has 6 interrupts available. List all of them. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-23ARM: dts: sun5i: Add missing timers interruptsMaxime Ripard
The timer unit in the sun5i die has 6 interrupts available. List all of them. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-23ARM: dts: sun4i: Add missing timers interruptsMaxime Ripard
The timer unit in the A10 has 6 interrupts available. List all of them. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-23dt-bindings: mfd: Convert Allwinner GPADC bindings to a schemaMaxime Ripard
The Allwinner SoCs have an embedded GPADC that is doing thermal reading as well, supported in Linux, with a matching Device Tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that controller over to a YAML schemas. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-23arm64: dts: allwinner: h6: Introduce Tanix TX6 boardJernej Skrabec
Tanix TX6 is an Allwinner H6 based TV box, which supports: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 4GiB DDR3 RAM (3GiB useable) - 100Mbps EMAC via AC200 EPHY - Cdtech 47822BS Wifi/BT - 2x USB 2.0 Host and 1x USB 3.0 Host - HDMI port - IR receiver - 64GiB eMMC - 5V/2A DC power supply Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-23dt-bindings: arm: sunxi: Add compatible for Tanix TX6 boardJernej Skrabec
Add new Oranth Tanix TX6 board compatible string to the bindings documentation. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-23arm64: allwinner: h6: add I2C nodesBhushan Shah
Add device-tree nodes for i2c0 to i2c2, and also add relevant pinctrl nodes. Suggested-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Bhushan Shah <bshah@kde.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-23dt-bindings: i2c: mv64xxx: Add compatible for the H6 i2c node.Bhushan Shah
Allwinner H6 have a mv64xxx i2c interface available to be used. Signed-off-by: Bhushan Shah <bshah@kde.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-23ARM: dts: sunxi: Add mdio bus sub-node to GMACChen-Yu Tsai
The DWMAC binding never supported having the Ethernet PHY node as a direct child to the controller, nor did it support the "phy" property as a way to specify which Ethernet PHY to use. What seemed to work was simply the implementation ignoring the "phy" property and instead probing all addresses on the MDIO bus and using the first available one. The recent switch from "phy" to "phy-handle" breaks the assumptions of the implementation, and does not match what the binding requires. The binding requires that if an MDIO bus is described, it shall be a sub-node with the "snps,dwmac-mdio" compatible string. Add a device node for the MDIO bus, and move the Ethernet PHY node under it. Also fix up the #address-cells and #size-cells properties where needed. Fixes: de332de26d19 ("ARM: dts: sunxi: Switch from phy to phy-handle") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-23arm64: dts: allwinner: Enable DDC regulator for Beelink GS1Clément Péron
Beelink GS1 has a DDC I2C bus voltage shifter. This is actually missing and video is limited to 1024x768 due to missing EDID information. Add the DDC regulator in the device-tree. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-23arm64: dts: allwinner: h6: Enable SPDIF for Beelink GS1Clément Péron
Beelink GS1 board has a SPDIF out connector, so enable it in the device-tree and add a simple SPDIF soundcard. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-23arm64: dts: allwinner: Add SPDIF node for Allwinner H6Clément Péron
The Allwinner H6 has a SPDIF controller called OWA (One Wire Audio). Only one pinmuxing is available so set it as default. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-23ARM: dts: sun8i: s3: add devicetree for Lichee zero plus w/ S3Icenowy Zheng
Lichee zero plus is a core board made by Sipeed, which includes on-board TF slot or SMT SD NAND, and optional SPI NOR or eMMC, a UART debug header, a microUSB slot and a gold finger connector for expansion. It can use either Sochip S3 or Allwinner S3L SoC. Add the basic device tree for the core board, w/o optional onboard storage, and with S3 SoC. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-23ARM: sunxi: dts: s3/s3l/v3: add DTSI files for S3/S3L/V3 SoCsIcenowy Zheng
The Allwinner S3/S3L/V3 SoCs all share the same die with the V3s SoC, but with more GPIO wired out of the package. Add a DTSI file for these SoCs. It just replaces some compatible strings of the V3s DTSI now. As these SoCs share the same feature set on Linux, we use the first known chip (V3) as the file's name. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-23dt-bindings: arm: sunxi: add binding for Lichee Zero Plus core boardIcenowy Zheng
The Lichee Zero Plus is a core board made by Sipeed, with a microUSB connector on it, TF slot or WSON8 SD chip, optional eMMC or SPI Flash. It has a gold finger connector for expansion, and UART is available from reserved pins w/ 2.54mm pitch. The board can use either SoChip S3 or Allwinner V3L SoCs. Add the device tree binding of the basic version of the core board -- w/o eMMC or SPI Flash, w/ TF slot or WSON8 SD, and use S3 SoC. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-23arm64: dts: allwinner: orange-pi-3: Enable HDMI outputOndrej Jirman
Orange Pi 3 has a DDC_CEC_EN signal connected to PH2, that enables the DDC I2C bus voltage shifter. Before EDID can be read, we need to pull PH2 high. This is realized by the ddc-en-gpios property. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-23ARM: dts: sun8i: a83t: Enable HDMI output on Cubietruck PlusChen-Yu Tsai
The Cubietruck Plus has an HDMI connector tied to the HDMI output of the SoC. Enables display output via HDMI on the Cubietruck Plus. The connector device node is named "hdmi-connector" as there is also a display port connector, which is tied to the MIPI DSI output of the SoC through a MIPI-DSI-to-DP bridge. This part is not supported yet. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-22ARM: dts: ux500: Remove ab8500_ldo_usb regulator from device treeStephan Gerhold
Support for the USB regulator of AB8500 was removed in commit 41a06aa738ad ("regulator: ab8500: Remove USB regulator"). However, the configuration was never removed from the device tree. It does no longer have any effect, remove it from the device tree. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-22ARM: dts: ux500: Move ab8500 nodes to ste-ab8500.dtsiStephan Gerhold
Some Ux500 devices use the newer AB8505 PMIC instead of AB8500. Although they are very similar, there are subtle differences like the number of regulators or the available GPIO pins. At the moment, ste-dbx5x0.dtsi always configures the AB8500 PMIC. To support devices with AB8505, it is necessary to split the AB8500-specific parts into a separate .dtsi file. Boards can then select the PMIC by including either ste-ab8500.dtsi or ste-ab8505.dtsi. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-22arm64: dts: mt8183: add I2C nodesQii Wang
Add i2c nodes to mt8183 and mt8183-evb. Signed-off-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2019-08-22arm64: dts: mt8183: fix pwrap gic numberHsin-Hsiung Wang
The correct gic number of pwrap is 185 instead of 209. This patch fixes it to avoid triggering error interrupt. Fixes: e526c9bc11f8 ("arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile") Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2019-08-22arm: dts: mediatek: add basic support for MT7629 SoCRyder Lee
This adds basic support for MT7629 reference board. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2019-08-22ARM: dts: aspeed: swift: Add eMMC deviceJoel Stanley
Swift contains an eMMC device attached to the second SDHCI controller. Reviewed-by: Adriana Kobylak <anoo@us.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-08-21arm64: dts: qcom: sm8150: Add apps shared nodesVinod Koul
Add hwlock, pmu, smem, tcsr_mutex_regs, apss_shared mailbox, apps_rsc including the rpmhcc child nodes to the SM8150 DTSI Co-developed-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-21arm64: dts: qcom: sm8150: Add reserved-memory regionsVinod Koul
Add the reserved memory regions in SM8150 Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-21arm64: dts: qcom: sm8150-mtp: Add regulatorsVinod Koul
Add the regulators found in the mtp platform. This platform consists of pmic PM8150, PM8150L and PM8009. Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-21arm64: dts: qcom: sm8150-mtp: Add base dts fileVinod Koul
This add base DTS file for sm8150-mtp and enables boot to console, adds tlmm reserved range, resin node, volume down key and also includes pmic file. Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-21arm64: dts: qcom: pm8150l: Add base dts fileVinod Koul
PMIC pm8150l is a slave pmic and this adds base DTS file for pm8150l with power-on, adc and gpio nodes Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-21arm64: dts: qcom: pm8150b: Add base dts fileVinod Koul
PMIC pm8150b is a slave pmic and this adds base DTS file for pm8150b with power-on, adc, and gpio nodes Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-21arm64: dts: qcom: pm8150: Add base dts fileVinod Koul
Add base DTS file for pm8150 along with GPIOs, power-on, rtc and vadc nodes Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-21arm64: dts: qcom: sm8150: Add base dts fileVinod Koul
This add base DTS file with cpu, psci, firmware, clock node tlmm and spmi and enables boot to console Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-21arm64: sdm845: add adsp and cdsp fastrpc nodesSrinivas Kandagatla
Add fastrpc compute context bank nodes to both cdsp and adsp. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-21ARM: dts: at91: at91sam9x5dm.dtsi: Style cleanupUwe Kleine-König
- use tags from included dtsi instead of duplicating the hierarchy There are no differences in the generated .dtbs Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20190812212757.23432-9-uwe@kleine-koenig.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-21ARM: dts: at91: at91sam9x5_lcd.dtsi: Style cleanupUwe Kleine-König
- use tags from included dtsi instead of duplicating the hierarchy There are no differences in the generated .dtbs Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20190812212757.23432-8-uwe@kleine-koenig.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-21ARM: dts: at91: at91sam9xx5ek: Style cleanupUwe Kleine-König
- newline between properties and sub-nodes - use tags from included dtsi instead of duplicating the hierarchy There are no differences in the generated .dtbs Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20190812212757.23432-7-uwe@kleine-koenig.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-21ARM: dts: at91: at91sam9g15: Style cleanupUwe Kleine-König
- use tags from included dtsi instead of duplicating the hierarchy There are no differences in the generated .dtbs Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20190812212757.23432-6-uwe@kleine-koenig.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-21ARM: dts: at91: kizboxmini: Style cleanupUwe Kleine-König
- use tags from included dtsi instead of duplicating the hierarchy There are no differences in the generated .dtb Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20190812212757.23432-5-uwe@kleine-koenig.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-21ARM: dts: at91: cosino: Style cleanupUwe Kleine-König
- newline between properties and sub-nodes - use tags from included dtsi instead of duplicating the hierarchy - status should be the last property There are no differences in the generated .dtb Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20190812212757.23432-4-uwe@kleine-koenig.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-21ARM: dts: at91: ariettag25: style cleanupUwe Kleine-König
- newline between properties and sub-nodes - use tags from included dtsi instead of duplicating the hierarchy - status should be the last property - drop duplicated alias There are no differences in the generated .dtb Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20190812212757.23432-3-uwe@kleine-koenig.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-21ARM: dts: at91: ariag25: Style cleanupUwe Kleine-König
- newline between properties and sub-nodes - use tags from included dtsi instead of duplicating the hierarchy There are no differences in the generated .dtb Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20190812212757.23432-2-uwe@kleine-koenig.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-21ARM: dts: at91: Add label for sam9x5's internal RTCUwe Kleine-König
This allows to simplify several machine device trees using this label instead of duplicating the SoC's hierarchy. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20190812212757.23432-1-uwe@kleine-koenig.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
generated by cgit (git 2.34.1) at 2025-09-23 05:51:13 +0000