summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-12riscv: Fix unmet direct dependencies built based on SOC_VIRTKefeng Wang
Fix unmet direct dependencies Warning and fix Kconfig indent. WARNING: unmet direct dependencies detected for POWER_RESET_SYSCON Depends on [n]: POWER_RESET [=n] && OF [=y] && HAS_IOMEM [=y] Selected by [y]: - SOC_VIRT [=y] WARNING: unmet direct dependencies detected for POWER_RESET_SYSCON_POWEROFF Depends on [n]: POWER_RESET [=n] && OF [=y] && HAS_IOMEM [=y] Selected by [y]: - SOC_VIRT [=y] WARNING: unmet direct dependencies detected for RTC_DRV_GOLDFISH Depends on [n]: RTC_CLASS [=n] && OF [=y] && HAS_IOMEM [=y] && (GOLDFISH [=y] || COMPILE_TEST [=n]) Selected by [y]: - SOC_VIRT [=y] Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-05-12clk: tegra: Fix initial rate for pll_a on Tegra124Thierry Reding
pll_a_out0 and the I2S clocks are already configured to default to rates corresponding to a 44.1 kHz sampling rate, but the pll_a configuration was set to a default that is not listed in the frequency table, which caused the PLL code to compute an invalid configuration. As a result of this invalid configuration, Jetson TK1 fails to resume from suspend. This used to get papered over because the ASoC driver would force audio clocks to a 44.1 kHz configuration on boot. However, that's not really necessary and was hence removed in commit ff5d18cb04f4 ("ASoC: tegra: Enable audio mclk during tegra_asoc_utils_init()"). Fix the initial rate for pll_a so that it matches the 44.1 kHz entry in the pll_a frequency table. Fixes: ff5d18cb04f4 ("ASoC: tegra: Enable audio mclk during tegra_asoc_utils_init()") Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lkml.kernel.org/r/20200505071655.644773-1-thierry.reding@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-12riscv: perf: RISCV_BASE_PMU should be independentKefeng Wang
Selecting PERF_EVENTS without selecting RISCV_BASE_PMU results in a build error. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> [Palmer: commit text] Fixes: 178e9fc47aae("perf: riscv: preliminary RISC-V support") Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-05-12x86/ftrace: Have ftrace trampolines turn read-only at the end of system boot upSteven Rostedt (VMware)
Booting one of my machines, it triggered the following crash: Kernel/User page tables isolation: enabled ftrace: allocating 36577 entries in 143 pages Starting tracer 'function' BUG: unable to handle page fault for address: ffffffffa000005c #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation PGD 2014067 P4D 2014067 PUD 2015063 PMD 7b253067 PTE 7b252061 Oops: 0003 [#1] PREEMPT SMP PTI CPU: 0 PID: 0 Comm: swapper Not tainted 5.4.0-test+ #24 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007 RIP: 0010:text_poke_early+0x4a/0x58 Code: 34 24 48 89 54 24 08 e8 bf 72 0b 00 48 8b 34 24 48 8b 4c 24 08 84 c0 74 0b 48 89 df f3 a4 48 83 c4 10 5b c3 9c 58 fa 48 89 df <f3> a4 50 9d 48 83 c4 10 5b e9 d6 f9 ff ff 0 41 57 49 RSP: 0000:ffffffff82003d38 EFLAGS: 00010046 RAX: 0000000000000046 RBX: ffffffffa000005c RCX: 0000000000000005 RDX: 0000000000000005 RSI: ffffffff825b9a90 RDI: ffffffffa000005c RBP: ffffffffa000005c R08: 0000000000000000 R09: ffffffff8206e6e0 R10: ffff88807b01f4c0 R11: ffffffff8176c106 R12: ffffffff8206e6e0 R13: ffffffff824f2440 R14: 0000000000000000 R15: ffffffff8206eac0 FS: 0000000000000000(0000) GS:ffff88807d400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa000005c CR3: 0000000002012000 CR4: 00000000000006b0 Call Trace: text_poke_bp+0x27/0x64 ? mutex_lock+0x36/0x5d arch_ftrace_update_trampoline+0x287/0x2d5 ? ftrace_replace_code+0x14b/0x160 ? ftrace_update_ftrace_func+0x65/0x6c __register_ftrace_function+0x6d/0x81 ftrace_startup+0x23/0xc1 register_ftrace_function+0x20/0x37 func_set_flag+0x59/0x77 __set_tracer_option.isra.19+0x20/0x3e trace_set_options+0xd6/0x13e apply_trace_boot_options+0x44/0x6d register_tracer+0x19e/0x1ac early_trace_init+0x21b/0x2c9 start_kernel+0x241/0x518 ? load_ucode_intel_bsp+0x21/0x52 secondary_startup_64+0xa4/0xb0 I was able to trigger it on other machines, when I added to the kernel command line of both "ftrace=function" and "trace_options=func_stack_trace". The cause is the "ftrace=function" would register the function tracer and create a trampoline, and it will set it as executable and read-only. Then the "trace_options=func_stack_trace" would then update the same trampoline to include the stack tracer version of the function tracer. But since the trampoline already exists, it updates it with text_poke_bp(). The problem is that text_poke_bp() called while system_state == SYSTEM_BOOTING, it will simply do a memcpy() and not the page mapping, as it would think that the text is still read-write. But in this case it is not, and we take a fault and crash. Instead, lets keep the ftrace trampolines read-write during boot up, and then when the kernel executable text is set to read-only, the ftrace trampolines get set to read-only as well. Link: https://lkml.kernel.org/r/20200430202147.4dc6e2de@oasis.local.home Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: stable@vger.kernel.org Fixes: 768ae4406a5c ("x86/ftrace: Use text_poke()") Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-05-12RDMA/uverbs: Move IB_EVENT_DEVICE_FATAL to destroy_uobjJason Gunthorpe
When multiple async FDs were allowed to exist the idea was for all broadcast events to be delivered to all async FDs, however IB_EVENT_DEVICE_FATAL was missed. Instead of having ib_uverbs_free_hw_resources() special case the global async_fd, have it cause the event during the uobject destruction. Every async fd is now a uobject so simply generate the IB_EVENT_DEVICE_FATAL while destroying the async fd uobject. This ensures every async FD gets a copy of the event. Fixes: d680e88e2013 ("RDMA/core: Add UVERBS_METHOD_ASYNC_EVENT_ALLOC") Link: https://lore.kernel.org/r/20200507063348.98713-3-leon@kernel.org Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-12RDMA/uverbs: Do not discard the IB_EVENT_DEVICE_FATAL eventJason Gunthorpe
The commit below moved all of the destruction to the disassociate step and cleaned up the event channel during destroy_uobj. However, when ib_uverbs_free_hw_resources() pushes IB_EVENT_DEVICE_FATAL and then immediately goes to destroy all uobjects this causes ib_uverbs_free_event_queue() to discard the queued event if userspace hasn't already read() it. Unlike all other event queues async FD needs to defer the ib_uverbs_free_event_queue() until FD release. This still unregisters the handler from the IB device during disassociation. Fixes: 3e032c0e92aa ("RDMA/core: Make ib_uverbs_async_event_file into a uobject") Link: https://lore.kernel.org/r/20200507063348.98713-2-leon@kernel.org Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-12tcp: fix SO_RCVLOWAT hangs with fat skbsEric Dumazet
We autotune rcvbuf whenever SO_RCVLOWAT is set to account for 100% overhead in tcp_set_rcvlowat() This works well when skb->len/skb->truesize ratio is bigger than 0.5 But if we receive packets with small MSS, we can end up in a situation where not enough bytes are available in the receive queue to satisfy RCVLOWAT setting. As our sk_rcvbuf limit is hit, we send zero windows in ACK packets, preventing remote peer from sending more data. Even autotuning does not help, because it only triggers at the time user process drains the queue. If no EPOLLIN is generated, this can not happen. Note poll() has a similar issue, after commit c7004482e8dc ("tcp: Respect SO_RCVLOWAT in tcp_poll().") Fixes: 03f45c883c6f ("tcp: avoid extra wakeups for SO_RCVLOWAT users") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12net: ethernet: ti: Remove TI_CPTS_MOD workaroundClay McClure
My recent commit b6d49cab44b5 ("net: Make PTP-specific drivers depend on PTP_1588_CLOCK") exposes a missing dependency in defconfigs that select TI_CPTS without selecting PTP_1588_CLOCK, leading to linker errors of the form: drivers/net/ethernet/ti/cpsw.o: in function `cpsw_ndo_stop': cpsw.c:(.text+0x680): undefined reference to `cpts_unregister' ... That's because TI_CPTS_MOD (which is the symbol gating the _compilation_ of cpts.c) now depends on PTP_1588_CLOCK, and so is not enabled in these configurations, but TI_CPTS (which is the symbol gating _calls_ to the cpts functions) _is_ enabled. So we end up compiling calls to functions that don't exist, resulting in the linker errors. This patch fixes build errors and restores previous behavior by: - ensure PTP_1588_CLOCK=y in TI specific configs and CPTS will be built - remove TI_CPTS_MOD and, instead, add dependencies from CPTS in TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV as below: config TI_CPSW_SWITCHDEV ... depends on TI_CPTS || !TI_CPTS which will ensure proper dependencies PTP_1588_CLOCK -> TI_CPTS -> TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV and build type selection. Note. For NFS boot + CPTS all of above configs have to be built-in. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dan Murphy <dmurphy@ti.com> Cc: Tony Lindgren <tony@atomide.com> Fixes: b6d49cab44b5 ("net: Make PTP-specific drivers depend on PTP_1588_CLOCK") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Clay McClure <clay@daemons.net> [grygorii.strashko@ti.com: rewording, add deps cpsw/netcp from cpts, drop IS_REACHABLE] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12Merge branch 'ionic-fixes'David S. Miller
Shannon Nelson says: ==================== ionic fixes These are a couple more fixes after more fw-upgrade testing. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12ionic: call ionic_port_init after fw-upgradeShannon Nelson
Since the fw has been re-inited, we need to refresh the port information dma address so we can see fresh port information. Let's call ionic_port_init again, and tweak it to allow for a call to simply refresh the existing dma address. Fixes: c672412f6172 ("ionic: remove lifs on fw reset") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12ionic: leave netdev mac alone after fw-upgradeShannon Nelson
When running in a bond setup, or some other potential configurations, the netdev mac may have been changed from the default device mac. Since the userland doesn't know about the changes going on under the covers in a fw-upgrade it doesn't know the re-push the mac filter. The driver needs to leave the netdev mac filter alone when rebuilding after the fw-upgrade. Fixes: c672412f6172 ("ionic: remove lifs on fw reset") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12ptp: fix struct member comment for do_aux_workJacob Keller
The do_aux_work callback had documentation in the structure comment which referred to it as "do_work". Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Richard Cochran <richardcochran@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12mptcp: Initialize map_seq upon subflow establishmentChristoph Paasch
When the other MPTCP-peer uses 32-bit data-sequence numbers, we rely on map_seq to indicate how to expand to a 64-bit data-sequence number in expand_seq() when receiving data. For new subflows, this field is not initialized, thus results in an "invalid" mapping being discarded. Fix this by initializing map_seq upon subflow establishment time. Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests") Signed-off-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12Merge tag 'trace-v5.7-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Fixes to previous fixes. Unfortunately, the last set of fixes introduced some minor bugs: - The bootconfig apply_xbc() leak fix caused the application to return a positive number on success, when it should have returned zero. - The preempt_irq_delay_thread fix to make the creation code wait for the kthread to finish to prevent it from executing after module unload, can now cause the kthread to exit before it even executes (preventing it to run its tests). - The fix to the bootconfig that fixed the initrd to remove the bootconfig from causing the kernel to panic, now prints a warning that the bootconfig is not found, even when bootconfig is not on the command line" * tag 'trace-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: bootconfig: Fix to prevent warning message if no bootconfig option tracing: Wait for preempt irq delay thread to execute tools/bootconfig: Fix apply_xbc() to return zero on success
2020-05-12Merge tag 'gpio-v5.7-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Some GPIO fixes for v5.7, slightly overdue. Been learning MMUs and KASan that is why it's late. Bartosz helped me out, luckily! - Fix pin configuration in the PCA953x driver - Ruggedize the watch/unwatch ioctl() - Possible call to a sleeping function when holding a spinlock, avoid this - Fix UML builds with DT overlays - Mask Tegra GPIO IRQs during shutdown()" * tag 'gpio-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: tegra: mask GPIO IRQs during IRQ shutdown gpio: of: Build fails if CONFIG_OF_DYNAMIC enabled without CONFIG_OF_GPIO gpiolib: don't call sleeping functions with a spinlock taken gpiolib: improve the robustness of watch/unwatch ioctl() gpio: pca953x: Fix pca953x_gpio_set_config
2020-05-12Merge tag 'gfs2-v5.7-rc1.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 fixes from Andreas Gruenbacher: "Various gfs2 fixes. Fixes for bugs prior to v5.7: - Fix random block reads when reading fragmented journals (v5.2) - Fix a possible random memory access in gfs2_walk_metadata (v5.3) Fixes for v5.7: - Fix several overlooked gfs2_qa_get / gfs2_qa_put imbalances - Fix several bugs in the new filesystem withdraw logic" * tag 'gfs2-v5.7-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: Revert "gfs2: Don't demote a glock until its revokes are written" gfs2: If go_sync returns error, withdraw but skip invalidate gfs2: Grab glock reference sooner in gfs2_add_revoke gfs2: don't call quota_unhold if quotas are not locked gfs2: move privileged user check to gfs2_quota_lock_check gfs2: remove check for quotas on in gfs2_quota_check gfs2: Change BUG_ON to an assert_withdraw in gfs2_quota_change gfs2: Fix problems regarding gfs2_qa_get and _put gfs2: More gfs2_find_jhead fixes gfs2: Another gfs2_walk_metadata fix gfs2: Fix use-after-free in gfs2_logd after withdraw gfs2: Fix BUG during unmount after file system withdraw gfs2: Fix error exit in do_xmote gfs2: fix withdraw sequence deadlock
2020-05-12ASoC: mmp-sspa: Set appropriate bus format for given bit widthLubomir Rintel
The values set by set_dai_fmt() and hw_params() seem to be tailored only for 32-bit formats. Negotiate the correct ones in hw_params() callback instead. This was essentially copied from the OLPC kernel driver and tested to fix wrong audio output for non-32bit formats. The documentation is not available. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20200511210134.1224532-10-lkundrak@v3.sk Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-12ASoC: mmp-sspa: Add support for the runtime power managementLubomir Rintel
Only turn on the Audio island when it's in use. This requires keeping track of control register contents instead of reloading them back from hardware, because they're lost when the power is off. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20200511210134.1224532-9-lkundrak@v3.sk Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-12ASoC: mmp-sspa: Prepare/unprepare the clocksLubomir Rintel
The driver enables the clocks without preparing them and disables without unpreparing afterwards. Fix that. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20200511210134.1224532-8-lkundrak@v3.sk Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-12ASoC: mmp-sspa: Remove the embedded struct ssp_deviceLubomir Rintel
The "serial port" it represents is actually a SPI controller -- it's not clear why would the audio serial interface embed it. We're only using the mmio_base and clk fields. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20200511210134.1224532-7-lkundrak@v3.sk Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-12ASoC: mmp-sspa: Add support for soc-generic-dmaengine-pcmLubomir Rintel
This makes the driver usable with the mmp_tdma drier via soc-generic-dmaengine-pcm. This is conditionalized on DT node (support for DT is added by a later patch). A custom mmap callback that creates a NC mapping is used instead of the default WC one, because with write-combining some bytes don't seem to make it through for reasons unknown to me. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20200511210134.1224532-6-lkundrak@v3.sk Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-12ASoC: mmp-sspa: Get rid of dma_params and phys_baseLubomir Rintel
This makes things simpler. There's no reason not to just embed the struct snd_dmaengine_dai_dma_data in struct sspa_priv and do away with an unnecessary kmalloc(). While at that, we can initialize the snd_dmaengine_dai_dma_data structures earlier. Let's also stop offsetting the source/destination of the DMA transfer by phys_base. Firstly, it's never set and is always zero. Secondly, the hardware actually ignores it, at least on a MMP2 and MMP3. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20200511210134.1224532-5-lkundrak@v3.sk Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-12ASoC: mmp-sspa: A trivial typo fixLubomir Rintel
"Transmit", not "Tansmit". Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20200511210134.1224532-4-lkundrak@v3.sk Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-12ASoC: ti: omap-mcbsp: Fix an error handling path in 'asoc_mcbsp_probe()'Christophe JAILLET
If an error occurs after the call to 'omap_mcbsp_init()', the reference to 'mcbsp->fclk' must be decremented, as already done in the remove function. This can be achieved easily by using the devm_ variant of 'clk_get()' when the reference is taken in 'omap_mcbsp_init()' This fixes the leak in the probe and has the side effect to simplify both the error handling path of 'omap_mcbsp_init()' and the remove function. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Peter Ujfalusi <peter.ujflausi@ti.com> Link: https://lore.kernel.org/r/20200512134325.252073-1-christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-12ASoC: Intel: Skylake: Update description for HDaudio kconfigCezary Rojewski
With 'ASoC: Intel: Skylake: Fix HDaudio and Dmic' series applied, warning is no longer true. Remove it and update the description. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20200506212114.8502-1-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-12ASoC: rockchip-i2s: add description for rk3308Johan Jonker
The description below is already in use for rk3308.dtsi, but was somehow never added to a document, so add "rockchip,rk3308-i2s", "rockchip,rk3066-i2s" for i2s nodes on a rk3308 platform to rockchip-i2s.yaml. One of the rk3308 i2s nodes also has a different dma layout, so change that as well. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200507113238.7904-1-jbx6244@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-12ASoC: ux500: mop500: Fix some refcounted resources issuesChristophe JAILLET
There are 2 issues here: - if one of the 'of_parse_phandle' fails, calling 'mop500_of_node_put()' is a no-op because the 'mop500_dai_links' structure has not been initialized yet, so the referenced are not decremented - The reference stored in 'mop500_dai_links[i].codecs' is refcounted only once in the probe and must be decremented only once. Fixes: 39013bd60e79 ("ASoC: Ux500: Dispose of device nodes correctly") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20200512100705.246349-1-christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-12ASoC: Intel: Skylake: Replace zero-length array with flexible-arrayGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20200511174647.GA17318@embeddedor Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-12nvme-pci: dma read memory barrier for completionsKeith Busch
Control dependencies do not guarantee load order across the condition, allowing a CPU to predict and speculate memory reads. Commit 324b494c2862 inlined verifying a new completion with its handling. At least one architecture was observed to access the contents out of order, resulting in the driver using stale data for the completion. Add a dma read barrier before reading the completion queue entry and after the condition its contents depend on to ensure the read order is determinsitic. Reported-by: John Garry <john.garry@huawei.com> Suggested-by: Will Deacon <will@kernel.org> Signed-off-by: Keith Busch <kbusch@kernel.org> Tested-by: John Garry <john.garry@huawei.com> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-12Merge branch 'for-5.7' of ↵Mark Brown
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.8
2020-05-12RDMA/iw_cxgb4: Fix incorrect function parametersPotnuri Bharat Teja
While reading the TCB field in t4_tcb_get_field32() the wrong mask is passed as a parameter which leads the driver eventually to a kernel panic/app segfault from access to an illegal SRQ index while flushing the SRQ completions during connection teardown. Fixes: 11a27e2121a5 ("iw_cxgb4: complete the cached SRQ buffers") Link: https://lore.kernel.org/r/20200511185608.5202-1-bharat@chelsio.com Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-12RDMA/core: Fix double put of resourceMaor Gottlieb
Do not decrease the reference count of resource tracker object twice in the error flow of res_get_common_doit. Fixes: c5dfe0ea6ffa ("RDMA/nldev: Add resource tracker doit callback") Link: https://lore.kernel.org/r/20200507062942.98305-1-leon@kernel.org Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-12IB/core: Fix potential NULL pointer dereference in pkey cacheJack Morgenstein
The IB core pkey cache is populated by procedure ib_cache_update(). Initially, the pkey cache pointer is NULL. ib_cache_update allocates a buffer and populates it with the device's pkeys, via repeated calls to procedure ib_query_pkey(). If there is a failure in populating the pkey buffer via ib_query_pkey(), ib_cache_update does not replace the old pkey buffer cache with the updated one -- it leaves the old cache as is. Since initially the pkey buffer cache is NULL, when calling ib_cache_update the first time, a failure in ib_query_pkey() will cause the pkey buffer cache pointer to remain NULL. In this situation, any calls subsequent to ib_get_cached_pkey(), ib_find_cached_pkey(), or ib_find_cached_pkey_exact() will try to dereference the NULL pkey cache pointer, causing a kernel panic. Fix this by checking the ib_cache_update() return value. Fixes: 8faea9fd4a39 ("RDMA/cache: Move the cache per-port data into the main ib_port_data") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/20200507071012.100594-1-leon@kernel.org Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-12IB/hfi1: Fix another case where pq is left on waitlistMike Marciniszyn
The commit noted below fixed a case where a pq is left on the sdma wait list. It however missed another case. user_sdma_send_pkts() has two calls from hfi1_user_sdma_process_request(). If the first one fails as indicated by -EBUSY, the pq will be placed on the waitlist as by design. If the second call then succeeds, the pq is still on the waitlist setting up a race with the interrupt handler if a subsequent request uses a different SDMA engine Fix by deleting the first call. The use of pcount and the intent to send a short burst of packets followed by the larger balance of packets was never correctly implemented, because the two calls always send pcount packets no matter what. A subsequent patch will correct that issue. Fixes: 9a293d1e21a6 ("IB/hfi1: Ensure pq is not left on waitlist") Link: https://lore.kernel.org/r/20200504130917.175613.43231.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-12IB/i40iw: Remove bogus call to netdev_master_upper_dev_get()Denis V. Lunev
Local variable netdev is not used in these calls. It should be noted, that this change is required to work in bonded mode. Otherwise we would get the following assert: "RTNL: assertion failed at net/core/dev.c (5665)" With the calltrace as follows: dump_stack+0x19/0x1b netdev_master_upper_dev_get+0x61/0x70 i40iw_addr_resolve_neigh+0x1e8/0x220 i40iw_make_cm_node+0x296/0x700 ? i40iw_find_listener.isra.10+0xcc/0x110 i40iw_receive_ilq+0x3d4/0x810 i40iw_puda_poll_completion+0x341/0x420 i40iw_process_ceq+0xa5/0x280 i40iw_ceq_dpc+0x1e/0x40 tasklet_action+0x83/0x140 __do_softirq+0x125/0x2bb call_softirq+0x1c/0x30 do_softirq+0x65/0xa0 irq_exit+0x105/0x110 do_IRQ+0x56/0xf0 common_interrupt+0x16a/0x16a ? cpuidle_enter_state+0x57/0xd0 cpuidle_idle_call+0xde/0x230 arch_cpu_idle+0xe/0xc0 cpu_startup_entry+0x14a/0x1e0 start_secondary+0x1f7/0x270 start_cpu+0x5/0x14 Link: https://lore.kernel.org/r/20200428131511.11049-1-den@openvz.org Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-12IB/mlx4: Test return value of calls to ib_get_cached_pkeyJack Morgenstein
In the mlx4_ib_post_send() flow, some functions call ib_get_cached_pkey() without checking its return value. If ib_get_cached_pkey() returns an error code, these functions should return failure. Fixes: 1ffeb2eb8be9 ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support") Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Fixes: e622f2f4ad21 ("IB: split struct ib_send_wr") Link: https://lore.kernel.org/r/20200426075921.130074-1-leon@kernel.org Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-12RDMA/rxe: Always return ERR_PTR from rxe_create_mmap_info()Sudip Mukherjee
The commit below modified rxe_create_mmap_info() to return ERR_PTR's but didn't update the callers to handle them. Modify rxe_create_mmap_info() to only return ERR_PTR and fix all error checking after rxe_create_mmap_info() is called. Ensure that all other exit paths properly set the error return. Fixes: ff23dfa13457 ("IB: Pass only ib_udata in function prototypes") Link: https://lore.kernel.org/r/20200425233545.17210-1-sudipm.mukherjee@gmail.com Link: https://lore.kernel.org/r/20200511183742.GB225608@mwanda Cc: stable@vger.kernel.org [5.4+] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-12bootconfig: Fix to prevent warning message if no bootconfig optionMasami Hiramatsu
Commit de462e5f1071 ("bootconfig: Fix to remove bootconfig data from initrd while boot") causes a cosmetic regression on dmesg, which warns "no bootconfig data" message without bootconfig cmdline option. Fix setup_boot_config() by moving no bootconfig check after commandline option check. Link: http://lkml.kernel.org/r/9b1ba335-071d-c983-89a4-2677b522dcc8@molgen.mpg.de Link: http://lkml.kernel.org/r/158916116468.21787.14558782332170588206.stgit@devnote2 Fixes: de462e5f1071 ("bootconfig: Fix to remove bootconfig data from initrd while boot") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-05-12ASoC: mmp-sspa: Drop S20_3LE caseLubomir Rintel
It does nothing, because the corresponding bit s not flipped on in .formats and the audio SRAM DMA engine is not able to handle 20-bit transfers anyway. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20200511210134.1224532-3-lkundrak@v3.sk Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-12ASoC: mmp-sspa: Flip SNDRV_PCM_FMTBIT_S24_3LE onLubomir Rintel
The hw_params() callback handles the 3-byte format, not SNDRV_PCM_FMTBIT_S24_LE. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20200511210134.1224532-2-lkundrak@v3.sk Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-12ASoC: Intel: Use readq to read 64 bit registersAmadeusz Sławiński
In order to fix issue described in: "ASoC: Intel: sst: ipc command timeout" https://patchwork.kernel.org/patch/11482829/ use readq function, which is meant to read 64 bit values from registers. On 32 bit platforms it falls back to two readl calls. Reported-by: Brent Lu <brent.lu@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Tested-by: Brent Lu <brent.lu@intel.com> Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20200507133405.32251-2-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-12ASoC: Intel: baytrail: Fix register accessAmadeusz Sławiński
Baytrail has 64 bit registers, so we should use *read64* to read from it and then use proper mask values to check status. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Tested-by: Brent Lu <brent.lu@intel.com> Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20200507133405.32251-1-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-12drm/amd/amdgpu: Update update_config() logicLeo (Hanghong) Ma
[Why] For MST case: when update_config is called to disable a stream, this clears the settings for all the streams on that link. We should only clear the settings for the stream that was disabled. [How] Clear the settings after the call to remove display is called. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-12drm/amd/amdgpu: add raven1 part to the gfxoff quirk listTom St Denis
On my raven1 system (rev c6) with VBIOS 113-RAVEN-114 GFXOFF is not stable (resulting in large block tiling noise in some applications). Disabling GFXOFF via the quirk list fixes the problems for me. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-05-12pinctrl: qcom: Add affinity callbacks to msmgpio IRQ chipVenkata Narendra Kumar Gutta
Wakeup capable GPIO IRQs routed via PDC are not being migrated when a CPU is hotplugged. Add affinity callbacks to msmgpio IRQ chip to update the affinity of wakeup capable IRQs. Fixes: e35a6ae0eb3a ("pinctrl/msm: Setup GPIO chip in hierarchy") Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org> [mkshah: updated commit text and minor code fixes] Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Tested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1588314617-4556-1-git-send-email-mkshah@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-12powerpc/40x: Make more space for system call exceptionChristophe Leroy
When CONFIG_VIRT_CPU_ACCOUNTING is selected, system call exception handler doesn't fit below 0xd00 and build fails. As exception 0xd00 doesn't exist and is never generated by 40x, comment it out in order to get more space for system call exception. Fixes: 9e27086292aa ("powerpc/32: Warn and return ENOSYS on syscalls from kernel") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/633165d72f75b4ef4c0901aebe99d3915c93e9a2.1589043863.git.christophe.leroy@csgroup.eu
2020-05-12netfilter: nft_set_rbtree: Add missing expired checksPhil Sutter
Expired intervals would still match and be dumped to user space until garbage collection wiped them out. Make sure they stop matching and disappear (from users' perspective) as soon as they expire. Fixes: 8d8540c4f5e03 ("netfilter: nft_set_rbtree: add timeout support") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-05-12netfilter: flowtable: set NF_FLOW_TEARDOWN flag on entry expirationPablo Neira Ayuso
If the flow timer expires, the gc sets on the NF_FLOW_TEARDOWN flag. Otherwise, the flowtable software path might race to refresh the timeout, leaving the state machine in inconsistent state. Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support") Reported-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-05-12efi/earlycon: Fix early printk for wider fontsDave Young
When I play with terminus fonts I noticed the efi early printk does not work because the earlycon code assumes font width is 8. Here add the code to adapt with larger fonts. Tested with all kinds of kernel built-in fonts on my laptop. Also tested with a local draft patch for 14x28 !bold terminus font. Signed-off-by: Dave Young <dyoung@redhat.com> Link: https://lore.kernel.org/r/20200412024927.GA6884@dhcp-128-65.nay.redhat.com Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-12SoC: rsnd: add interrupt support for SSI BUSIF bufferYongbo Zhang
SSI BUSIF buffer is possible to overflow or underflow, especially in a hypervisor environment. If there is no interrupt support, it will eventually lead to errors in pcm data. This patch adds overflow and underflow interrupt support for SSI BUSIF buffer. Reported-by: Chen Li <licheng0822@thundersoft.com> Signed-off-by: Yongbo Zhang <giraffesnn123@gmail.com> Tested-by: Chen Li <licheng0822@thundersoft.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20200512093003.28332-1-giraffesnn123@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-13 11:18:16 +0000