summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-11-01drm/amd/display (gcc13): fix enum mismatchJiri Slaby (SUSE)
rn_vbios_smu_set_dcn_low_power_state() produces a valid warning with gcc-13: drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr_vbios_smu.c:237:6: error: conflicting types for 'rn_vbios_smu_set_dcn_low_power_state' due to enum/integer mismatch; have 'void(struct clk_mgr_internal *, enum dcn_pwr_state)' drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr_vbios_smu.h:36:6: note: previous declaration of 'rn_vbios_smu_set_dcn_low_power_state' with type 'void(struct clk_mgr_internal *, int)' I.e. the type of the 2nd parameter of rn_vbios_smu_set_dcn_low_power_state() in the declaration is int, while the definition spells enum dcn_pwr_state. Synchronize them to the latter (and add a forward enum declaration). Cc: Martin Liska <mliska@suse.cz> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: 3.2.210Aric Cyr
DC version 3.2.210 brings along the following: - Investigate tool reported FCLK P-state deviations - Fix null pointer issues found in emulation - Add DSC delay factor workaround - Round up DST_after_scaler to nearest int - Use forced DSC bpp in DML - Fix DCN32 DSC delay calculation - Add a debug option HBR2CP2520 over TPS4 - Stop waiting for vblank during pipe programming - Modify checks to enable TPS3 pattern when required - Remove rate check from pixel rate divider update - Check validation passed after applying pipe split changes - Update DML formula - Don't enable ODM + MPO - Include virtual signal to set k1 and k2 values - Reinit DPG when exiting dynamic ODM Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Investigate tool reported FCLK P-state deviationsNevenko Stupar
[Why] Fix for some of the tool reported modes for FCLK P-state deviations and UCLK P-state deviations that are coming from DSC terms and/or Scaling terms causing MinActiveFCLKChangeLatencySupported and MaxActiveDRAMClockChangeLatencySupported incorrectly calculated in DML for these configurations. Reviewed-by: Chaitanya Dhere <Chaitanya.Dhere@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Fix null pointer issues found in emulationCharlene Liu
[why] fix null point issues found in emulation Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Add DSC delay factor workaroundGeorge Shen
[Why] Certain 4K high refresh rate modes requiring DSC are exhibiting top of screen underflow corruption. Increasing the DSC delay by a factor of 6 percent stops the underflow for most use cases. [How] Multiply DSC delay requirement in DML by a factor. Add debug option to make this DSC delay factor configurable. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Round up DST_after_scaler to nearest intGeorge Shen
[Why] The DST_after_scaler value that DML spreadsheet outputs is generally the driver value round up to the nearest int. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Use forced DSC bpp in DMLGeorge Shen
[Why] DSC config is calculated separately from DML calculations. DML should use these separately calculated DSC params. The issue is that the calculated bpp is not properly propagated into DML. [How] Correctly used forced_bpp value in DML. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Fix DCN32 DSC delay calculationGeorge Shen
[Why] DCN32 DSC delay calculation had an unintentional integer division, resulting in a mismatch against the DML spreadsheet. [How] Cast numerator to double before performing the division. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: [FW Promotion] Release 0.0.141.0Anthony Koo
- Add flag as a status read back that indicates back to back flips detected during psr. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Add a debug option HBR2CP2520 over TPS4Leo Chen
[Why & How] There are cases when we may need to override the hardcoded TPS4 test pattern. Added parameters and config option to be able to allow this. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Stop waiting for vblank during pipe programmingMartin Leung
[why and how] This line was originally removed for a compliance issue, but then reverted as it caused a fringe underflow case. However, the addition of this line caused a underflow regression when subVP is on, and it needs to be removed again. We plan to fix subvp underflow and then re-add in this line. After that, we will investigate what to do next for the compliance issue. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Modify checks to enable TPS3 pattern when requiredIswara Nagulendran
[HOW&WHY] Checking if both DSC and FEC supported from sink and source before going with TPS3 pattern during link training. Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Iswara Nagulendran <iswara.nagulendran@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Remove rate check from pixel rate divider updateTaimur Hassan
[Why] This check is not needed, and can cause CRC mismatch. [How] Remove check and early exit from divider update. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Check validation passed after applying pipe split changesDillon Varone
[WHY?] Validation can fail for configurations that were previously supported, by only changing parameters such as the DET allocations, which is currently unexpected. [HOW?] Add a check that validation passes after applying pipe split related changes. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Update DML formulaCharlene Liu
[why] This is to update SW DML implementation. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Don't enable ODM + MPOAlvin Lee
[Description] Driver doesn't support ODM + MPO Reviewed-by: Dillon Varone <Dillon.Varone@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Include virtual signal to set k1 and k2 valuesEric Bernstein
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Reinit DPG when exiting dynamic ODMDillon Varone
[WHY] DPG must be returned to initialized state when pipe is disabled. [HOW] Reinit DPG on unused pipes when exiting dynamic ODM. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: drop vblank_lock from struct amdgpu_display_managerHamza Mahfooz
As of commit 09a5df6c444c ("drm/amd/display: Fix multi-display support for idle opt workqueue"), vblank_lock is no longer being used. So, don't init it in amdgpu_dm_init() and remove it from struct amdgpu_display_manager. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amdkfd: Remove unused variableMa Jun
kfd_topology_device->cache_count is not used by other fucntions, so remove it. Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amdgpu: Skip program gfxhub_v3_0_3 system aperture registers under SRIOVYifan Zha
[Why] gfxhub_v3_0_3 system aperture registers are removed from RLCG register access range. [How] Skip access gfxhub_v3_0_3 system aperture registers under SRIOV VF. These registers will be programmed on host side. Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amdgpu: Skip access SDMA0_F32_CNTL in sdma_v6_0_enable under SRIOVYifan Zha
[Why] SDMA0_F32_CNTL is a PF_only regitser which will be blocked by L1. RLCG will not program the register as well. [How] Skip to program SDMA0_F32_CNTL under SRIOV VF. Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amdgpu: Skip access GRBM_CNTL under SRIOV on gfx_v11Yifan Zha
[Why] GRBM_CNTL is a PF_only register on gfx_v11. RLCG interface will return "out of range" under SRIOV VF. [How] Skip access GRBM_CNTL under gfx_v11 SRIOV VF. Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amdgpu: Disable GPU reset on SRIOV before remove pci.Gavin Wan
The recent change brought a bug on SRIOV envrionment. It caused unloading amdgpu failed on Guest VM. The reason is that the VF FLR was requested while unloading amdgpu driver, but the VF FLR of SRIOV sequence is wrong while removing PCI device. For SRIOV, the guest driver should not trigger the whole XGMI hive to do the reset. Host driver control how the device been reset. Fixes: f5c7e7797060 ("drm/amdgpu: Adjust removal control flow for smu v13_0_2") Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Gavin Wan <Gavin.Wan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amdgpu: Enable GFX RAS feature for gfx v11_0_3Candice Li
v1: Support gfx ras feature enablement for gfx v11_0_3. v2: Update function name and error message. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/i915/psr: Send update also on invalidateJouni Högander
Currently we are observing mouse cursor stuttering when using xrandr --scaling=1.2x1.2. X scaling/transformation seems to be doing fronbuffer rendering. When moving mouse cursor X seems to perform several invalidates and only one DirtyFB. I.e. it seems to be assuming updates are sent to panel while drawing is done. Earlier we were disabling PSR in frontbuffer invalidate call back (when drawing in X started). PSR was re-enabled in frontbuffer flush callback (dirtyfb ioctl). This was working fine with X scaling/transformation. Now we are just enabling continuous full frame (cff) in PSR invalidate callback. Enabling cff doesn't trigger any updates. It just configures PSR to send full frame when updates are sent. I.e. there are no updates on screen before PSR flush callback is made. X seems to be doing several updates in frontbuffer before doing dirtyfb ioctl. Fix this by sending single update on every invalidate callback. Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Fixes: 805f04d42a6b ("drm/i915/display/psr: Use continuos full frame to handle frontbuffer invalidations") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6679 Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reported-by: Brian J. Tarricone <brian@tarricone.org> Tested-by: Brian J. Tarricone <brian@tarricone.org> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221024054649.31299-1-jouni.hogander@intel.com
2022-11-01Merge tag 'drm-intel-next-2022-10-28' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Hotplug code clean-up and organization (Jani, Gustavo) - More VBT specific code clean-up, doc, organization, and improvements (Ville) - More MTL enabling work (Matt, RK, Anusha, Jose) - FBC related clean-ups and improvements (Ville) - Removing unused sw_fence_await_reservation (Niranjana) - Big chunch of display house clean-up (Ville) - Many Watermark fixes and clean-ups (Ville) - Fix device info for devices without display (Jani) - Fix TC port PLLs after readout (Ville) - DPLL ID clean-ups (Ville) - Prep work for finishing (de)gamma readout (Ville) - PSR fixes and improvements (Jouni, Jose) - Reject excessive dotclocks early (Ville) - DRRS related improvements (Ville) - Simplify uncore register updates (Andrzej) - Fix simulated GPU reset wrt. encoder HW readout (Imre) - Add a ADL-P workaround (Jose) - Fix clear mask in GEN7_MISCCPCTL update (Andrzej) - Temporarily disable runtime_pm for discrete (Anshuman) - Improve fbdev debugs (Nirmoy) - Fix DP FRL link training status (Ankit) - Other small display fixes (Ankit, Suraj) - Allow panel fixed modes to have differing sync polarities (Ville) - Clean up crtc state flag checks (Ville) - Fix race conditions during DKL PHY accesses (Imre) - Prep-work for cdclock squash and crawl modes (Anusha) - ELD precompute and readout (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y1wd6ZJ8LdJpCfZL@intel.com
2022-10-31drm/vmwgfx: Cleanup the cursor snooping codeZack Rusin
Cursor snooping depended on implicit size and format which made debugging quite difficult. Make the code easier to following by making everything explicit and instead of using magic numbers predefine all the parameters the code depends on. Also fixes incorrectly computed pitches for non-aligned cursor snoops. Fix which has no practical effect because non-aligned cursor snoops are not used by the X11 driver and Wayland cursors will go through mob cursors, instead of surface dma's. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Michael Banack <banackm@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026031936.1004280-2-zack@kde.org
2022-10-31drm/vmwgfx: Validate the box size for the snooped cursorZack Rusin
Invalid userspace dma surface copies could potentially overflow the memcpy from the surface to the snooped image leading to crashes. To fix it the dimensions of the copybox have to be validated against the expected size of the snooped cursor. Signed-off-by: Zack Rusin <zackr@vmware.com> Fixes: 2ac863719e51 ("vmwgfx: Snoop DMA transfers with non-covering sizes") Cc: <stable@vger.kernel.org> # v3.2+ Reviewed-by: Michael Banack <banackm@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026031936.1004280-1-zack@kde.org
2022-10-31drm/i915/dmabuf: Use scatterlist for_each_sg APIMichael J. Ruhl
Update open coded for loop to use the standard scatterlist for_each_sg API. Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221028155029.494736-4-matthew.auld@intel.com
2022-10-31drm/i915/dmabuf: dmabuf cleanupMichael J. Ruhl
Some minor cleanup of some variables for consistency. Normalize struct sg_table to sgt. Normalize struct dma_buf_attachment to attach. checkpatch issues sizeof(), !NULL updates. Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221028155029.494736-3-matthew.auld@intel.com
2022-10-31drm/i915/selftests: exercise GPU access from the importerMatthew Auld
Using PAGE_SIZE here potentially hides issues so bump that to something larger. This should also make it possible for iommu to coalesce entries for us. With that in place verify we can write from the GPU using the importers sg_table, followed by checking that our writes match when read from the CPU side. v2: Switch over to igt_gpu_fill_dw(), which looks to be more widely supported than the migrate stuff (at least OOTB). References: https://gitlab.freedesktop.org/drm/intel/-/issues/7306 Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221028155029.494736-2-matthew.auld@intel.com
2022-10-31drm/i915/dmabuf: fix sg_table handling in map_dma_bufMatthew Auld
We need to iterate over the original entries here for the sg_table, pulling out the struct page for each one, to be remapped. However currently this incorrectly iterates over the final dma mapped entries, which is likely just one gigantic sg entry if the iommu is enabled, leading to us only mapping the first struct page (and any physically contiguous pages following it), even if there is potentially lots more data to follow. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7306 Fixes: 1286ff739773 ("i915: add dmabuf/prime buffer sharing support.") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Michael J. Ruhl <michael.j.ruhl@intel.com> Cc: <stable@vger.kernel.org> # v3.5+ Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221028155029.494736-1-matthew.auld@intel.com
2022-10-31drm/i915/dgfx: Grab wakeref at i915_ttm_unmap_virtualAnshuman Gupta
We had already grabbed the rpm wakeref at obj destruction path, but it also required to grab the wakeref when object moves. When i915_gem_object_release_mmap_offset() gets called by i915_ttm_move_notify(), it will release the mmap offset without grabbing the wakeref. We want to avoid that therefore, grab the wakeref at i915_ttm_unmap_virtual() accordingly. While doing that also changed the lmem_userfault_lock from mutex to spinlock, as spinlock widely used for list. Also changed if (obj->userfault_count) to GEM_BUG_ON(!obj->userfault_count). v2: - Removed lmem_userfault_{list,lock} from intel_gt. [Matt Auld] Fixes: ad74457a6b5a ("drm/i915/dgfx: Release mmap on rpm suspend") Suggested-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221027092242.1476080-3-anshuman.gupta@intel.com
2022-10-31drm/i915: Encapsulate lmem rpm stuff in intel_runtime_pmAnshuman Gupta
Runtime pm is not really per GT, therefore it make sense to move lmem_userfault_list, lmem_userfault_lock and userfault_wakeref from intel_gt to intel_runtime_pm structure, which is embedded to i915. No functional change. v2: - Fixes the code comment nit. [Matt Auld] Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221027092242.1476080-2-anshuman.gupta@intel.com
2022-10-29drm/rockchip: lvds: fix PM usage counter unbalance in poweronZhang Qilong
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. We fix it by replacing it with the newest pm_runtime_resume_and_get to keep usage counter balanced. Fixes: 34cc0aa25456 ("drm/rockchip: Add support for Rockchip Soc LVDS") Fixes: cca1705c3d89 ("drm/rockchip: lvds: Add PX30 support") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220922132107.105419-3-zhangqilong3@huawei.com
2022-10-29drm/rockchip: use pm_runtime_resume_and_get() instead of pm_runtime_get_sync()Yuan Can
Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() to avoid device usage counter leak. Signed-off-by: Yuan Can <yuancan@huawei.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220615062644.96837-1-yuancan@huawei.com
2022-10-29drm/rockchip: dsi: Remove the unused function dsi_update_bits()Jiapeng Chong
The function dsi_update_bits() is defined in the dw-mipi-dsi-rockchip.c file, but not called elsewhere, so delete this unused function. drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c:367:20: warning: unused function 'dsi_update_bits'. https://bugzilla.openanolis.cn/show_bug.cgi?id=2414 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20221017084330.94117-1-jiapeng.chong@linux.alibaba.com
2022-10-29drm/rockchip: vop2: Register Esmart0-win0 as primary planeSascha Hauer
Esmart0-win0 could serve as primary plane, so mark it as such. On RK3568 this window will never be used as primary plane, because the three windows at the beginning of the rk3568_vop_win_data[] array will be used. On RK3566 however, two of the windows at the beginning of the rk3568_vop_win_data[] array cannot not be used due to hardware limitations, so without this patch we end up with CRTCs without primary planes when multiple VPs are active. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220926081643.304759-1-s.hauer@pengutronix.de
2022-10-29drm: rockchip: remove rockchip_drm_framebuffer_init() functionJohan Jonker
The function rockchip_drm_framebuffer_init() was in use in the rockchip_drm_fbdev.c file, but that is now replaced by a generic fbdev setup. Reduce the image size by removing the rockchip_drm_framebuffer_init() and sub function rockchip_fb_alloc() and cleanup the rockchip_drm_fb.h header file. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: John Keeping <john@metanate.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/ebe91504-c5df-99e4-635f-832218584051@gmail.com
2022-10-28drm/i915/mtl: Add missing steering table terminatorsMatt Roper
The termination entries were missing for a couple of the recently-added MTL steering tables. Fixes: f32898c94a10 ("drm/i915/xelpg: Add multicast steering") Fixes: a7ec65fc7e83 ("drm/i915/xelpmp: Add multicast steering for media GT") Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221028224022.964997-1-matthew.d.roper@intel.com
2022-10-28drm: bridge: adv7511: use dev_err_probe in probe functionAhmad Fatoum
adv7511 probe may need to be attempted multiple times before no -EPROBE_DEFER is returned. Currently, every such probe results in an error message: [ 4.534229] adv7511 1-003d: failed to find dsi host [ 4.580288] adv7511 1-003d: failed to find dsi host This is misleading, as there is no error and probe deferral is normal behavior. Fix this by using dev_err_probe that will suppress -EPROBE_DEFER errors. While at it, we touch all dev_err in the probe path. This makes the code more concise and included the error code everywhere to aid user in debugging. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221026125246.3188260-1-a.fatoum@pengutronix.de
2022-10-28drm/i915/sdvo: Fix debug printVille Syrjälä
Correctly indicate which outputs we support in the debug print. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-9-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-10-28drm/i915/sdvo: Reduce copy-pasta in output setupVille Syrjälä
Avoid having to call the output init function for each output type separately. We can just call the right one based on the "class" of the output. Technically we could just walk the bits of the bitmask but that could change the order in which we initialize the outputs. To avoid any behavioural changes keep to the same explicit probe order as before. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-8-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-10-28drm/i915/sdvo: Get rid of the output type<->device index stuffVille Syrjälä
Get rid of this silly output type<->device index back and forth and just pass the output type directly to the corresponding output init function. This was already being done for TV outputs anyway. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-7-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-10-28drm/i915/sdvo: Don't add DDC modes for LVDSVille Syrjälä
Stop enumerating the DDC modes for SDVO LVDS outputs (outside the initial fixed mode setup). intel_panel_mode_valid() will just reject most of them anyway, and any left over are entirely pointless as they'll match the fixed mode hdisp+vdisp+vrefresh so no user visible effect from using them instead of the fixed mode. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-6-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-10-28drm/i915/sdvo: Simplify output setup debugsVille Syrjälä
Get rid of this funny byte based dumping of invalid output flags and just dump it as a single hex numbers. Also do that early since all the rest is going to get skipped anyway of the thing is zero. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-10-28drm/i915/sdvo: Grab mode_config.mutex during LVDS init to avoid WARNsVille Syrjälä
drm_mode_probed_add() is unhappy about being called w/o mode_config.mutex. Grab it during LVDS fixed mode setup to silence the WARNs. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7301 Fixes: aa2b88074a56 ("drm/i915/sdvo: Fix multi function encoder stuff") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-10-28drm/i915/sdvo: Setup DDC fully before output initVille Syrjälä
Call intel_sdvo_select_ddc_bus() before initializing any of the outputs. And before that is functional (assuming no VBT) we have to set up the controlled_outputs thing. Otherwise DDC won't be functional during the output init but LVDS really needs it for the fixed mode setup. Note that the whole multi output support still looks very bogus, and more work will be needed to make it correct. But for now this should at least fix the LVDS EDID fixed mode setup. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7301 Fixes: aa2b88074a56 ("drm/i915/sdvo: Fix multi function encoder stuff") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-10-28drm/i915/sdvo: Filter out invalid outputs more sensiblyVille Syrjälä
We try to filter out the corresponding xxx1 output if the xxx0 output is not present. But the way that is being done is pretty awkward. Make it less so. Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
generated by cgit (git 2.34.1) at 2025-09-13 09:19:12 +0000