summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-08-07smb3: add tracepoint for slow responsesSteve French
If responses take longer than one second from the server, we can optionally log them to dmesg in current cifs.ko code (CONFIG_CIFS_STATS2 must be configured and a /proc/fs/cifs/cifsFYI flag must be set), but can be more useful to log these via ftrace (tracepoint is smb3_slow_rsp) which is easier and more granular (still requires CONFIG_CIFS_STATS2 to be configured in the build though). Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-08-07cifs: add compound_send_recv()Ronnie Sahlberg
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-08-07cifs: make smb_send_rqst take an array of requestsRonnie Sahlberg
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-08-07Merge branch 'nfp-ttl-tos-geneve'David S. Miller
Simon Horman says: ==================== nfp: flower: tunnel TTL & TOS, and Geneve options set & match support this series contains updates for the TC Flower classifier and the offload facility for it in the NFP driver. * Patches 1 & 2: update the NFP driver to allow offload of matching and setting tunnel ToS/TTL of flows using the TC Flower classifier and tun_key action * Patches 3 & 4: enhance the flow dissector and TC Flower classifier to allow match on Geneve options * Patch 5 & 6: update the NFP driver to allow offload of matching and setting Geneve options of flows using the TC Flower classifier and tun_key action ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07nfp: flower: add geneve option match offloadPieter Jansen van Vuuren
Introduce a new layer for matching on geneve options. This allows offloading filters configured to match geneve with options. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07nfp: flower: add geneve option push action offloadPieter Jansen van Vuuren
Introduce new push geneve option action. This allows offloading filters configured to entunnel geneve with options. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07net/sched: allow flower to match tunnel optionsPieter Jansen van Vuuren
Allow matching on options in Geneve tunnel headers. This makes use of existing tunnel metadata support. The options can be described in the form CLASS:TYPE:DATA/CLASS_MASK:TYPE_MASK:DATA_MASK, where CLASS is represented as a 16bit hexadecimal value, TYPE as an 8bit hexadecimal value and DATA as a variable length hexadecimal value. e.g. # ip link add name geneve0 type geneve dstport 0 external # tc qdisc add dev geneve0 ingress # tc filter add dev geneve0 protocol ip parent ffff: \ flower \ enc_src_ip 10.0.99.192 \ enc_dst_ip 10.0.99.193 \ enc_key_id 11 \ geneve_opts 0102:80:1122334421314151/ffff:ff:ffffffffffffffff \ ip_proto udp \ action mirred egress redirect dev eth1 This patch adds support for matching Geneve options in the order supplied by the user. This leads to an efficient implementation in the software datapath (and in our opinion hardware datapaths that offload this feature). It is also compatible with Geneve options matching provided by the Open vSwitch kernel datapath which is relevant here as the Flower classifier may be used as a mechanism to program flows into hardware as a form of Open vSwitch datapath offload (sometimes referred to as OVS-TC). The netlink Kernel/Userspace API may be extended, for example by adding a flag, if other matching options are desired, for example matching given options in any order. This would require an implementation in the TC software datapath. And be done in a way that drivers that facilitate offload of the Flower classifier can reject or accept such flows based on hardware datapath capabilities. This approach was discussed and agreed on at Netconf 2017 in Seoul. Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07flow_dissector: allow dissection of tunnel options from metadataSimon Horman
Allow the existing 'dissection' of tunnel metadata to 'dissect' options already present in tunnel metadata. This dissection is controlled by a new dissector key, FLOW_DISSECTOR_KEY_ENC_OPTS. This dissection only occurs when skb_flow_dissect_tunnel_info() is called, currently only the Flower classifier makes that call. So there should be no impact on other users of the flow dissector. This is in preparation for allowing the flower classifier to match on Geneve options. Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07nfp: flower: allow matching on ipv4 UDP tunnel tos and ttlJohn Hurley
The addition of FLOW_DISSECTOR_KEY_ENC_IP to TC flower means that the ToS and TTL of the tunnel header can now be matched on. Extend the NFP tunnel match function to include these new fields. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07nfp: flower: set ip tunnel ttl from encap actionJohn Hurley
The TTL for encapsulating headers in IPv4 UDP tunnels is taken from a route lookup. Modify this to first check if a user has specified a TTL to be used in the TC action. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07cifs: update init_sg, crypt_message to take an array of rqstRonnie Sahlberg
These are used for SMB3 encryption and compounded requests. Update these functions and the other functions related to SMB3 encryption to take an array of requests. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-08-07i40e: fix i40e_add_queue_stats data pointer updateJacob Keller
This function accidentally failed to update the data pointer, which caused the reported stats to be incorrect. Additionally, statistics which follow queue stats in the output would potentially read non-zeroed garbage data from the ethtool buffer. This occurred because the data double pointer was not dereferenced before incrementing the size. Additionally, make sure this issue is more visible by adding a WARN_ONCE to the i40e_get_ethtool_stats function. This warning will trigger whenever the data pointer is not at the expected address, similar to the check that we make in the i40e_get_stat_strings() function. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-07i40e: Add AQ command for rearrange NVM structurePiotr Azarewicz
During switching between old NVM structure approach (called structured NVM) to new one (called flat NVM) or backward flash needs to be rearranged to required NVM structure. This is a part of transition from one NVM structure to another. The function is introduced to command firmware to start rearrangement process. Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-07i40e: Add additional return code to i40e_asq_send_commandPiotr Azarewicz
Firmware can return a busy state, so the function return I40E_ERR_NOT_READY. Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-07smb3: update readme to correct information about /proc/fs/cifs/StatsSteve French
Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2018-08-07smb3: fix reset of bytes read and written statsSteve French
echo 0 > /proc/fs/cifs/Stats is supposed to reset the stats but there were four (see example below) that were not reset (bytes read and witten, total vfs ops and max ops at one time). ... 0 session 0 share reconnects Total vfs operations: 100 maximum at one time: 2 1) \\localhost\test SMBs: 0 Bytes read: 502092 Bytes written: 31457286 TreeConnects: 0 total 0 failed TreeDisconnects: 0 total 0 failed ... This patch fixes cifs_stats_proc_write to properly reset those four. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2018-08-07smb3: display bytes_read and bytes_written in smb3 statsSteve French
We were only displaying bytes_read and bytes_written in cifs stats, fix smb3 stats to also display them. Sample output with this patch: cat /proc/fs/cifs/Stats: CIFS Session: 1 Share (unique mount targets): 2 SMB Request/Response Buffer: 1 Pool size: 5 SMB Small Req/Resp Buffer: 1 Pool size: 30 Operations (MIDs): 0 0 session 0 share reconnects Total vfs operations: 94 maximum at one time: 2 1) \\localhost\test SMBs: 214 Bytes read: 502092 Bytes written: 31457286 TreeConnects: 1 total 0 failed TreeDisconnects: 0 total 0 failed Creates: 52 total 3 failed Closes: 48 total 0 failed Flushes: 0 total 0 failed Reads: 17 total 0 failed Writes: 31 total 0 failed ... Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-08-07cifs: simple stats should always be enabledSteve French
CONFIG_CIFS_STATS should always be enabled as Pavel recently noted. Simple statistics are not a significant performance hit, and removing the ifdef simplifies the code slightly. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-08-07cifs: use a refcount to protect open/closing the cached file handleRonnie Sahlberg
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Cc: <stable@vger.kernel.org>
2018-08-07smb3: add reconnect tracepointsSteve French
Add tracepoints for reconnecting an smb3 session Example output (from trace-cmd) with the patch (showing the session marked for reconnect, the stat failing, and then the subsequent SMB3 commands after the server comes back up). The "smb3_reconnect" event is the new one. cifsd-25993 [000] .... 29635.368265: smb3_reconnect: server=localhost current_mid=0x1e stat-26200 [001] .... 29638.516403: smb3_enter: cifs_revalidate_dentry_attr: xid=22 stat-26200 [001] .... 29648.723296: smb3_exit_err: cifs_revalidate_dentry_attr: xid=22 rc=-112 kworker/0:1-22830 [000] .... 29653.850947: smb3_cmd_done: sid=0x0 tid=0x0 cmd=0 mid=0 kworker/0:1-22830 [000] .... 29653.851191: smb3_cmd_err: sid=0x8ae4683c tid=0x0 cmd=1 mid=1 status=0xc0000016 rc=-5 kworker/0:1-22830 [000] .... 29653.855254: smb3_cmd_done: sid=0x8ae4683c tid=0x0 cmd=1 mid=2 kworker/0:1-22830 [000] .... 29653.855482: smb3_cmd_done: sid=0x8ae4683c tid=0x8084f30d cmd=3 mid=3 Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2018-08-07i40e: fix warning about shadowed ring parameterJacob Keller
In commit 147e81ec7568 ("i40e: Test memory before ethtool alloc succeeds") code was added to handle ring allocation on systems with low memory. It shadowed the ring parameter pointer by introducing a local ring pointer inside the for loop. Most of the code in the loop already just accessed the ring via &rx_rings[i]. Since most of the code already does this, just remove the local variable. If someone considers it worth keeping a local around, they should use it for the whole section instead of just a couple of accesses. This fixes a warning when -Wshadow is enabled Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-07i40e: remove unnecessary i variable causing -Wshadow warningJacob Keller
Commit c61c8fe1d592 ("i40e: Implement an ethtool private flag to stop LLDP in FW") added an extra for-loop which added a shadowing 'i' variable as the index. However, the local variable i already exists, and we already use it as a loop index. Additionally, at this point, there is no further use of the variable, so it's safe to simply overwrite the variable contents. This fixes a -Wshadow warning which has started being enabled on some distributions Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Patryk Malek <patryk.malek@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-07smb3: add tracepoint for session expired or deletedSteve French
In debugging reconnection problems, want to be able to more easily trace cases in which the server has marked the SMB3 session expired or deleted (to distinguish from timeout cases). Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-08-07cifs: remove unused statsSteve French
These timers were a good idea but weren't used in current code, and the idea was cifs specific. Future patch will add similar timers for SMB2/SMB3, but no sense using memory for cifs timers that aren't used in current code. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-08-07smb3: don't request leases in symlink creation and querySteve French
Fixes problem pointed out by Pavel in discussions about commit 729c0c9dd55204f0c9a823ac8a7bfa83d36c7e78 Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> CC: Stable <stable@vger.kernel.org> # 3.18.x+
2018-08-07smb3: remove per-session operations from per-tree connection statsSteve French
Remove counters from the per-tree connection /proc/fs/cifs/Stats output that will always be zero (since they are not per-tcon ops) ie SMB3 Negotiate, SessionSetup, Logoff, Echo, Cancel. Also clarify "sent" to be "total" per-Pavel's suggestion (since this "total" includes total for all operations that we try to send whether or not succesffully sent). Sample output below: Resources in use CIFS Session: 1 Share (unique mount targets): 2 SMB Request/Response Buffer: 1 Pool size: 5 SMB Small Req/Resp Buffer: 1 Pool size: 30 Operations (MIDs): 0 1 session 2 share reconnects Total vfs operations: 23 maximum at one time: 2 1) \\localhost\test SMBs: 45 TreeConnects: 2 total 0 failed TreeDisconnects: 0 total 0 failed Creates: 13 total 2 failed Closes: 9 total 0 failed Flushes: 0 total 0 failed Reads: 0 total 0 failed Writes: 1 total 0 failed Locks: 0 total 0 failed IOCTLs: 3 total 1 failed QueryDirectories: 4 total 2 failed ChangeNotifies: 0 total 0 failed QueryInfos: 10 total 0 failed SetInfos: 3 total 0 failed OplockBreaks: 0 sent 0 failed Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-08-07SMB3: Number of requests sent should be displayed for SMB3 not just CIFSSteve French
For SMB2/SMB3 the number of requests sent was not displayed in /proc/fs/cifs/Stats unless CONFIG_CIFS_STATS2 was enabled (only number of failed requests displayed). As with earlier dialects, we should be displaying these counters if CONFIG_CIFS_STATS is enabled. They are important for debugging. e.g. when you cat /proc/fs/cifs/Stats (before the patch) Resources in use CIFS Session: 1 Share (unique mount targets): 2 SMB Request/Response Buffer: 1 Pool size: 5 SMB Small Req/Resp Buffer: 1 Pool size: 30 Operations (MIDs): 0 0 session 0 share reconnects Total vfs operations: 690 maximum at one time: 2 1) \\localhost\test SMBs: 975 Negotiates: 0 sent 0 failed SessionSetups: 0 sent 0 failed Logoffs: 0 sent 0 failed TreeConnects: 0 sent 0 failed TreeDisconnects: 0 sent 0 failed Creates: 0 sent 2 failed Closes: 0 sent 0 failed Flushes: 0 sent 0 failed Reads: 0 sent 0 failed Writes: 0 sent 0 failed Locks: 0 sent 0 failed IOCTLs: 0 sent 1 failed Cancels: 0 sent 0 failed Echos: 0 sent 0 failed QueryDirectories: 0 sent 63 failed Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-08-07smb3: snapshot mounts are read-only and make sure info is displayable about ↵Steve French
the mount snapshot mounts were not marked as read-only and did not display the snapshot time (in /proc/mounts) specified on mount With this patch - note that can not write to the snapshot mount (see "ro" in /proc/mounts line) and also the missing snapshot timewarp token time is dumped. Sample line from /proc/mounts with the patch: //127.0.0.1/scratch /mnt2 smb3 ro,relatime,vers=default,cache=strict,username=testuser,domain=,uid=0,noforceuid,gid=0,noforcegid,addr=127.0.0.1,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,noperm,rsize=1048576,wsize=1048576,echo_interval=60,snapshot=1234567,actimeo=1 0 0 Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Paulo Alcantara <palcantara@suse.de>
2018-08-07smb3: remove noisy warning message on mountSteve French
Some servers, like Samba, don't support the fsctl for query_network_interface_info so don't log a noisy warning message on mount for this by default unless the error is more serious. Lower the error to an FYI level so it does not get logged by default. Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-08-07smb3: simplify code by removing CONFIG_CIFS_SMB311Steve French
We really, really want to be encouraging use of secure dialects, and SMB3.1.1 offers useful security features, and will soon be the recommended dialect for many use cases. Simplify the code by removing the CONFIG_CIFS_SMB311 ifdef so users don't disable it in the build, and create compatibility and/or security issues with modern servers - many of which have been supporting this dialect for multiple years. Also clarify some of the Kconfig text for cifs.ko about SMB3.1.1 and current supported features in the module. Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-08-07cifs: add missing debug entries for kconfig optionsSteve French
/proc/fs/cifs/DebugData displays the features (Kconfig options) used to build cifs.ko but it was missing some, and needed comma separator. These can be useful in debugging certain problems so we know which optional features were enabled in the user's build. Also clarify them, by making them more closely match the corresponding CONFIG_CIFS_* parm. Old format: Features: dfs fscache posix spnego xattr acl New format: Features: DFS,FSCACHE,SMB_DIRECT,STATS,DEBUG2,ALLOW_INSECURE_LEGACY,CIFS_POSIX,UPCALL(SPNEGO),XATTR,ACL Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Paulo Alcantara <palcantara@suse.de> CC: Stable <stable@vger.kernel.org>
2018-08-07documentation update - remove old out of date feature infoSteve French
Following up on a suggestion by Matthew Wilcox ... The cifs CHANGES documentation file is out of date, and more current information is in the wiki. Delete the old version information that is of little use to make this documentation file more readable. CC: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-08-07smb3: add support for statfs for smb3.1.1 posix extensionsSteve French
Output now matches expected stat -f output for all fields except for Namelen and ID which were addressed in a companion patch (which retrieves them from existing SMB3 mechanisms and works whether POSIX enabled or not) Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2018-08-07smb3: fill in statfs fsid and correct namelenSteve French
Fil in the correct namelen (typically 255 not 4096) in the statfs response and also fill in a reasonably unique fsid (in this case taken from the volume id, and the creation time of the volume). In the case of the POSIX statfs all fields are now filled in, and in the case of non-POSIX mounts, all fields are filled in which can be. Signed-off-by: Steve French <stfrench@gmail.com> CC: Stable <stable@vger.kernel.org> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2018-08-07cifs: Make sure all data pages are signed correctlyPaulo Alcantara
Check if every data page is signed correctly in sigining helper. Signed-off-by: Paulo Alcantara <palcantara@suse.de> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-08-07CIFS: fix memory leak and remove dead codeAurelien Aptel
also fixes error code in smb311_posix_mkdir() (where the error assignment needs to go before the goto) a typo that Dan Carpenter and Paulo and Gustavo pointed out. Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Paulo Alcantara <palcantara@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-08-07cifs: allow disabling insecure dialects in the configSteve French
allow disabling cifs (SMB1 ie vers=1.0) and vers=2.0 in the config for the build of cifs.ko if want to always prevent mounting with these less secure dialects. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Jeremy Allison <jra@samba.org>
2018-08-07smb3: if server does not support posix do not allow posix mount optionSteve French
If user specifies "posix" on an SMB3.11 mount, then fail the mount if server does not return the POSIX negotiate context indicating support for posix. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2018-08-07cifs: use 64-bit timestamps for fscacheArnd Bergmann
In the fscache, we just need the timestamps as cookies to check for changes, so we don't really care about the overflow, but it's better to stop using the deprecated timespec so we don't have to go through explicit conversion functions. To avoid comparing uninitialized padding values that are copied while assigning the timespec values, this rearranges the members of cifs_fscache_inode_auxdata to avoid padding, and assigns them individually. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Paulo Alcantara <palcantara@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-08-07cifs: use timespec64 internallyArnd Bergmann
In cifs, the timestamps are stored in memory in the cifs_fattr structure, which uses the deprecated 'timespec' structure. Now that the VFS code has moved on to 'timespec64', the next step is to change over the fattr as well. This also makes 32-bit and 64-bit systems behave the same way, and no longer overflow the 32-bit time_t in year 2038. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Paulo Alcantara <palcantara@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-08-07cifs: Silence uninitialized variable warningDan Carpenter
This is not really a runtime issue but Smatch complains that: fs/cifs/smb2ops.c:1740 smb2_query_symlink() error: uninitialized symbol 'resp_buftype'. The warning is right that it can be uninitialized... Also "err_buf" would be NULL at this point and we're not supposed to pass NULLs to free_rsp_buf() or it might trigger some extra output if we turn on debugging. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Paulo Alcantara <palcantara@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-08-07Merge branch 'WoL-filters'David S. Miller
Florian Fainelli says: ==================== net: Support Wake-on-LAN using filters This is technically a v2, but this patch series builds on your feedback and defines the following: - a new WAKE_* bit: WAKE_FILTER which can be enabled alongside other type of Wake-on-LAN to support waking up on a programmed filter (match + action) - a new RX_CLS_FLOW_WAKE flow action which can be specified by an user when inserting a flow using ethtool::rxnfc, similar to the existing RX_CLS_FLOW_DISC The bcm_sf2 and bcmsysport drivers are updated accordingly to work in concert to allow matching packets at the switch level, identified by their filter location to be used as a match by the SYSTEM PORT (CPU/management controller) during Wake-on-LAN. Let me know if this looks better than the previous incarnation of the patch series. Attached is also the ethtool patch that I would be submitting once the uapi changes are committed. Thank you! Changes in v2: - bail out earlier in bcm_sf2_cfp's get_rxnfc if an error is encountered (Andrew) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07net: systemport: Add support for WAKE_FILTERFlorian Fainelli
The SYSTEMPORT MAC allows up to 8 filters to be programmed to wake-up from LAN. Verify that we have up to 8 filters and program them to the appropriate RXCHK entries to be matched (along with their masks). We need to update the entry and exit to Wake-on-LAN mode to keep the RXCHK engine running to match during suspend, but this is otherwise fairly similar to Magic Packet detection. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07net: dsa: bcm_sf2: Propagate ethtool::rxnfc to CPU portFlorian Fainelli
Allow propagating ethtool::rxnfc programming to the CPU/management port such that it is possible for such a CPU to perform e.g: Wake-on-LAN using filters configured by the switch. We need a tiny bit of cooperation between the switch drivers which is able to do the full flow matching, whereas the CPU/management port might not. The CPU/management driver needs to return -EOPNOTSUPP to indicate an non critical error, any other error code otherwise. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07ethtool: Add WAKE_FILTER and RX_CLS_FLOW_WAKEFlorian Fainelli
Add the ability to specify through ethtool::rxnfc that a rule location is special and will be used to participate in Wake-on-LAN, by e.g: having a specific pattern be matched. When this is the case, fs->ring_cookie must be set to the special value RX_CLS_FLOW_WAKE. We also define an additional ethtool::wolinfo flag: WAKE_FILTER which can be used to configure an Ethernet adapter to allow Wake-on-LAN using previously programmed filters. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07dt-bindings: Add Y Soft Corporation vendor prefixMichal Vokáč
Y Soft is headquartered in the Czech Republic and it is a worldwide provider of enterprise office solutions for print management. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-08-07of/fdt: Remove PPC32 longtrail hack in memory scanMichael Ellerman
When the OF code was originally made common by Grant in commit 51975db0b733 ("of/flattree: merge early_init_dt_scan_memory() common code") (Feb 2010), the common code inherited a hack to handle PPC "longtrail" machines, which had a "memory@0" node with no device_type. That check was then made to only apply to PPC32 in b44aa25d20e2 ("of: Handle memory@0 node on PPC32 only") (May 2014). But according to Paul Mackerras the "longtrail" machines are long dead, if they were ever seen in the wild at all. If someone does still have one, we can handle this firmware wart in powerpc platform code. So remove the hack once and for all. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Rob Herring <robh@kernel.org>
2018-08-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-08-07 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add cgroup local storage for BPF programs, which provides a fast accessible memory for storing various per-cgroup data like number of transmitted packets, etc, from Roman. 2) Support bpf_get_socket_cookie() BPF helper in several more program types that have a full socket available, from Andrey. 3) Significantly improve the performance of perf events which are reported from BPF offload. Also convert a couple of BPF AF_XDP samples overto use libbpf, both from Jakub. 4) seg6local LWT provides the End.DT6 action, which allows to decapsulate an outer IPv6 header containing a Segment Routing Header. Adds this action now to the seg6local BPF interface, from Mathieu. 5) Do not mark dst register as unbounded in MOV64 instruction when both src and dst register are the same, from Arthur. 6) Define u_smp_rmb() and u_smp_wmb() to their respective barrier instructions on arm64 for the AF_XDP sample code, from Brian. 7) Convert the tcp_client.py and tcp_server.py BPF selftest scripts over from Python 2 to Python 3, from Jeremy. 8) Enable BTF build flags to the BPF sample code Makefile, from Taeung. 9) Remove an unnecessary rcu_read_lock() in run_lwt_bpf(), from Taehee. 10) Several improvements to the README.rst from the BPF documentation to make it more consistent with RST format, from Tobin. 11) Replace all occurrences of strerror() by calls to strerror_r() in libbpf and fix a FORTIFY_SOURCE build error along with it, from Thomas. 12) Fix a bug in bpftool's get_btf() function to correctly propagate an error via PTR_ERR(), from Yue. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07xfs: remove dead error handling code in xfs_dquot_disk_alloc()Brian Foster
Colin Ian King reports that commit 82ff27bc52 ("xfs: automatic dfops buffer relogging") leaves around some dead error handling code in xfs_dquot_disk_alloc(). This was discovered via Coverity scan. Since the associated commit eliminates the act of joining a buffer to a dfops, this intermediate error state is no longer possible and the error handling code can be removed. Since the caller cancels the transaction on error, which cancels the dfops, eliminate the unnecessary xfs_defer_cancel() call and error handling labels. Fixes: 82ff27bc52 ("xfs: automatic dfops buffer relogging") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-08-07xfs: use WRITE_ONCE to update if_seqChristoph Hellwig
This adds ordering of the updates and makes sure we always see the if_seq update before the extent tree is modified. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-14 11:51:55 +0000