Age | Commit message (Collapse) | Author |
|
Since AP_VLAN interfaces are not passed to the driver, check offload_flags
on the bss vif instead.
Reported-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Fixes: 80a915ec4427 ("mac80211: add rx decapsulation offload support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Unlock before returning -EOPNOTSUPP.
Fixes: 3c06e91b40db ("wifi: mac80211: Support POWERED_ADDR_CHANGE feature")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
At some point a few kernel debug prints started appearing which
indicated something was sending invalid IEs:
"bad VHT capabilities, disabling VHT"
"Invalid HE elem, Disable HE"
Turns out these were being printed because the local hardware
supported HE/VHT but the peer/AP did not. Bad/invalid indicates,
to me at least, that the IE is in some way malformed, not missing.
For the HE print (ieee80211_verify_peer_he_mcs_support) it will
now silently fail if the HE capability element is missing (still
prints if the element size is wrong).
For the VHT print, it has been removed completely and will silently
set the DISABLE_VHT flag which is consistent with how DISABLE_HT
is set.
Signed-off-by: James Prestwood <prestwoj@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When building the probe request IEs HE support is checked for
the 6GHz band (wiphy->bands[NL80211_BAND_6GHZ]). If supported
the HE capability IE should be included according to the spec.
The problem is the 16-bit capability is obtained from the
band object (sband) that was passed in, not the 6GHz band
object (sband6). If the sband object doesn't support HE it will
result in a warning.
Fixes: 7d29bc50b30e ("mac80211: always include HE 6GHz capability in probe request")
Signed-off-by: James Prestwood <prestwoj@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since STP TCN frames are only 7 bytes, the pskb_may_pull call returns an error.
Instead of dropping those packets, bump them back to the slow path for proper
processing.
Fixes: 49ddf8e6e234 ("mac80211: add fast-rx path")
Reported-by: Chad Monroe <chad.monroe@smartrg.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This parse_opts will set invalid opts.rfd/wfd in case of failure which
we already check, but it is not clear for readers that parse_opts error
are handled in p9_fd_create: clarify this by explicitely checking the
return value.
Link: https://lkml.kernel.org/r/20220921210921.1654735-1-floridsleeves@gmail.com
Signed-off-by: Li Zhong <floridsleeves@gmail.com>
[Dominique: reworded commit message to clarify this is NOOP]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
xen transport was missing annotations
Link: https://lkml.kernel.org/r/20220909103546.73015-1-xiujianfeng@huawei.com
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
Shamelessly copying the explanation from Tetsuo Handa's suggested
patch[1] (slightly reworded):
syzbot is reporting inconsistent lock state in p9_req_put()[2],
for p9_tag_remove() from p9_req_put() from IRQ context is using
spin_lock_irqsave() on "struct p9_client"->lock but trans_fd
(not from IRQ context) is using spin_lock().
Since the locks actually protect different things in client.c and in
trans_fd.c, just replace trans_fd.c's lock by a new one specific to the
transport (client.c's protect the idr for fid/tag allocations,
while trans_fd.c's protects its own req list and request status field
that acts as the transport's state machine)
Link: https://lore.kernel.org/r/20220904112928.1308799-1-asmadeus@codewreck.org
Link: https://lkml.kernel.org/r/2470e028-9b05-2013-7198-1fdad071d999@I-love.SAKURA.ne.jp [1]
Link: https://syzkaller.appspot.com/bug?extid=2f20b523930c32c160cc [2]
Reported-by: syzbot <syzbot+2f20b523930c32c160cc@syzkaller.appspotmail.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
The hard-coded marker is out of date now, fix it using the nice define.
Fixes: 17773afdcd15 ("powerpc/64: use 32-bit immediate for STACK_FRAME_REGS_MARKER")
Reported-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221006143345.129077-1-npiggin@gmail.com
|
|
Ensure tegra_host member "curr_clk_rate" holds the actual clock rate
instead of requested clock rate for proper use during tuning correction
algorithm. Actual clk rate may not be the same as the requested clk
frequency depending on the parent clock source set. Tuning correction
algorithm depends on certain parameters which are sensitive to current
clk rate. If the host clk is selected instead of the actual clock rate,
tuning correction algorithm may end up applying invalid correction,
which could result in errors
Fixes: ea8fc5953e8b ("mmc: tegra: update hw tuning process")
Signed-off-by: Aniruddha TVS Rao <anrao@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221006130622.22900-4-pshete@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The driver is using of_device_id and therefore needs to include
mod_devicetable.h header. We used to get this definition indirectly via
inclusion of matrix_keypad.h from twl.h, but we are cleaning up
matrix_keypad.h from unnecessary includes.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220927154611.3330871-1-dmitry.torokhov@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Due to clk rounding errors on RZ/G2L platforms, it selects a clock source
with a lower clock rate compared to a higher one.
For eg: The rounding error (533333333 Hz / 4 * 4 = 533333332 Hz < 5333333
33 Hz) selects a clk source of 400 MHz instead of 533.333333 MHz.
This patch fixes this issue by adding a margin of (1/1024) higher to
the clock rate.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Fixes: bb6d3fa98a41 ("clk: renesas: rcar-gen3: Switch to new SD clock handling")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220928110755.849275-1-biju.das.jz@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
GCC-12 emits false positive -Warray-bounds warnings with
CONFIG_UBSAN_SHIFT (-fsanitize=shift). This is fixed in GCC 13[1],
and there is top-level Makefile logic to remove -Warray-bounds for
known-bad GCC versions staring with commit f0be87c42cbd ("gcc-12: disable
'-Warray-bounds' universally for now").
Remove the local work-around.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105679
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
GCC-12 emits false positive -Warray-bounds warnings with
CONFIG_UBSAN_SHIFT (-fsanitize=shift). This is fixed in GCC 13[1],
and there is top-level Makefile logic to remove -Warray-bounds for
known-bad GCC versions staring with commit f0be87c42cbd ("gcc-12: disable
'-Warray-bounds' universally for now").
Remove the local work-around.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105679
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If you try to create a 'mirror' ACL rule on a port that already has a
mirror rule, prestera_span_rule_add() will fail with EEXIST error.
This forces rollback procedure which destroys existing mirror rule on
hardware leaving it visible in linux.
Add an explicit check for EEXIST to prevent the deletion of the existing
rule but keep user seeing error message:
$ tc filter add dev sw1p1 ... skip_sw action mirred egress mirror dev sw1p2
$ tc filter add dev sw1p1 ... skip_sw action mirred egress mirror dev sw1p3
RTNETLINK answers: File exists
We have an error talking to the kernel
Fixes: 13defa275eef ("net: marvell: prestera: Add matchall support")
Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu>
Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
reference
Gwangun Jung reported a slab-out-of-bounds access in fib_nh_match:
fib_nh_match+0xf98/0x1130 linux-6.0-rc7/net/ipv4/fib_semantics.c:961
fib_table_delete+0x5f3/0xa40 linux-6.0-rc7/net/ipv4/fib_trie.c:1753
inet_rtm_delroute+0x2b3/0x380 linux-6.0-rc7/net/ipv4/fib_frontend.c:874
Separate nexthop objects are mutually exclusive with the legacy
multipath spec. Fix fib_nh_match to return if the config for the
to be deleted route contains a multipath spec while the fib_info
is using a nexthop object.
Fixes: 493ced1ac47c ("ipv4: Allow routes to use nexthop objects")
Fixes: 6bf92d70e690 ("net: ipv4: fix route with nexthop object delete warning")
Reported-by: Gwangun Jung <exsociety@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
net/pkt_sched.h is included twice in enetc_qos.c,
remove one of them.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2334
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Semicolon is not required after curly braces.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2332
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During vm boot, there might be possibility that vf registration
call comes before the vf association from host to vm.
And this might break netvsc vf path, To prevent the same block
vf registration until vf bind message comes from host.
Cc: stable@vger.kernel.org
Fixes: 00d7ddba11436 ("hv_netvsc: pair VF based on serial number")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Gaurav Kohli <gauravkohli@linux.microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds handling to return -EINVAL for an unknown addr type. The
current behaviour is to return 0 as successful but the size of an
unknown addr type is not defined and should return an error like -EINVAL.
Fixes: 94160108a70c ("net/ieee802154: fix uninit value bug in dgram_sendmsg")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add Jan as maintainer for Shared Memory Communications (SMC)
Sockets.
Acked-by: Jan Karcher <jaka@linux.ibm.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
pcifront_try_connect() and pcifront_attach_devices() share a large
chunk of duplicated code for reading the config information from
Xenstore, which only differs regarding calling pcifront_rescan_root()
or pcifront_scan_root().
Put that code into a new sub-function. It is fine to always call
pcifront_rescan_root() from that common function, as it will fallback
to pcifront_scan_root() if the domain/bus combination isn't known
yet (and pcifront_scan_root() should never be called for an already
known domain/bus combination anyway). In order to avoid duplicate
messages for the fallback case move the check for domain/bus not known
to the beginning of pcifront_rescan_root().
While at it fix the error reporting in case the root-xx node had the
wrong format.
As the return value of pcifront_try_connect() and
pcifront_attach_devices() are not used anywhere make those functions
return void. As an additional bonus this removes the dubious return
of -EFAULT in case of an unexpected driver state.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
I have a Sipeed Lichee RV dock board which only has 512MB DDR, so
memory optimizations such as swap on zram are helpful. As is seen
in commit d0637c505f8a ("arm64: enable THP_SWAP for arm64") and
commit bd4c82c22c367e ("mm, THP, swap: delay splitting THP after
swapped out"), THP_SWAP can improve the swap throughput significantly.
Enable THP_SWAP for RV64, testing the micro-benchmark which is
introduced by commit d0637c505f8a ("arm64: enable THP_SWAP for arm64")
shows below numbers on the Lichee RV dock board:
swp out bandwidth w/o patch: 66908 bytes/ms (mean of 10 tests)
swp out bandwidth w/ patch: 322638 bytes/ms (mean of 10 tests)
Improved by 382%!
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220829145742.3139-1-jszhang@kernel.org/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This got out of order during a merge conflict, fix it by putting the
entries in the correct order.
Fixes: 7ab52f75a9cf ("RISC-V: Add Sstc extension support")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220920204518.10988-1-palmer@rivosinc.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This reverts commit e4dc45b1848bc6bcac31eb1b4ccdd7f6718b3c86.
This is causing instability on Linus' desktop, and I'm seeing
oops with VK CTS runs.
netconsole got me the following oops:
[ 1234.778760] BUG: kernel NULL pointer dereference, address: 0000000000000088
[ 1234.778782] #PF: supervisor read access in kernel mode
[ 1234.778787] #PF: error_code(0x0000) - not-present page
[ 1234.778791] PGD 0 P4D 0
[ 1234.778798] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 1234.778803] CPU: 7 PID: 805 Comm: systemd-journal Not tainted 6.0.0+ #2
[ 1234.778809] Hardware name: System manufacturer System Product
Name/PRIME X370-PRO, BIOS 5603 07/28/2020
[ 1234.778813] RIP: 0010:drm_sched_job_done.isra.0+0xc/0x140 [gpu_sched]
[ 1234.778828] Code: aa 0f 1d ce e9 57 ff ff ff 48 89 d7 e8 9d 8f 3f
ce e9 4a ff ff ff 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 55 53
48 89 fb <48> 8b af 88 00 00 00 f0 ff 8d f0 00 00 00 48 8b 85 80 01 00
00 f0
[ 1234.778834] RSP: 0000:ffffabe680380de0 EFLAGS: 00010087
[ 1234.778839] RAX: ffffffffc04e9230 RBX: 0000000000000000 RCX: 0000000000000018
[ 1234.778897] RDX: 00000ba278e8977a RSI: ffff953fb288b460 RDI: 0000000000000000
[ 1234.778901] RBP: ffff953fb288b598 R08: 00000000000000e0 R09: ffff953fbd98b808
[ 1234.778905] R10: 0000000000000000 R11: ffffabe680380ff8 R12: ffffabe680380e00
[ 1234.778908] R13: 0000000000000001 R14: 00000000ffffffff R15: ffff953fbd9ec458
[ 1234.778912] FS: 00007f35e7008580(0000) GS:ffff95428ebc0000(0000)
knlGS:0000000000000000
[ 1234.778916] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1234.778919] CR2: 0000000000000088 CR3: 000000010147c000 CR4: 00000000003506e0
[ 1234.778924] Call Trace:
[ 1234.778981] <IRQ>
[ 1234.778989] dma_fence_signal_timestamp_locked+0x6a/0xe0
[ 1234.778999] dma_fence_signal+0x2c/0x50
[ 1234.779005] amdgpu_fence_process+0xc8/0x140 [amdgpu]
[ 1234.779234] sdma_v3_0_process_trap_irq+0x70/0x80 [amdgpu]
[ 1234.779395] amdgpu_irq_dispatch+0xa9/0x1d0 [amdgpu]
[ 1234.779609] amdgpu_ih_process+0x80/0x100 [amdgpu]
[ 1234.779783] amdgpu_irq_handler+0x1f/0x60 [amdgpu]
[ 1234.779940] __handle_irq_event_percpu+0x46/0x190
[ 1234.779946] handle_irq_event+0x34/0x70
[ 1234.779949] handle_edge_irq+0x9f/0x240
[ 1234.779954] __common_interrupt+0x66/0x100
[ 1234.779960] common_interrupt+0xa0/0xc0
[ 1234.779965] </IRQ>
[ 1234.779968] <TASK>
[ 1234.779971] asm_common_interrupt+0x22/0x40
[ 1234.779976] RIP: 0010:finish_mkwrite_fault+0x22/0x110
[ 1234.779981] Code: 1f 84 00 00 00 00 00 90 0f 1f 44 00 00 41 55 41
54 55 48 89 fd 53 48 8b 07 f6 40 50 08 0f 84 eb 00 00 00 48 8b 45 30
48 8b 18 <48> 89 df e8 66 bd ff ff 48 85 c0 74 0d 48 89 c2 83 e2 01 48
83 ea
[ 1234.779985] RSP: 0000:ffffabe680bcfd78 EFLAGS: 00000202
Revert it for now and figure it out later.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
syzbot is reporting hung task at p9_fd_close() [1], for p9_mux_poll_stop()
from p9_conn_destroy() from p9_fd_close() is failing to interrupt already
started kernel_read() from p9_fd_read() from p9_read_work() and/or
kernel_write() from p9_fd_write() from p9_write_work() requests.
Since p9_socket_open() sets O_NONBLOCK flag, p9_mux_poll_stop() does not
need to interrupt kernel_read()/kernel_write(). However, since p9_fd_open()
does not set O_NONBLOCK flag, but pipe blocks unless signal is pending,
p9_mux_poll_stop() needs to interrupt kernel_read()/kernel_write() when
the file descriptor refers to a pipe. In other words, pipe file descriptor
needs to be handled as if socket file descriptor.
We somehow need to interrupt kernel_read()/kernel_write() on pipes.
A minimal change, which this patch is doing, is to set O_NONBLOCK flag
from p9_fd_open(), for O_NONBLOCK flag does not affect reading/writing
of regular files. But this approach changes O_NONBLOCK flag on userspace-
supplied file descriptors (which might break userspace programs), and
O_NONBLOCK flag could be changed by userspace. It would be possible to set
O_NONBLOCK flag every time p9_fd_read()/p9_fd_write() is invoked, but still
remains small race window for clearing O_NONBLOCK flag.
If we don't want to manipulate O_NONBLOCK flag, we might be able to
surround kernel_read()/kernel_write() with set_thread_flag(TIF_SIGPENDING)
and recalc_sigpending(). Since p9_read_work()/p9_write_work() works are
processed by kernel threads which process global system_wq workqueue,
signals could not be delivered from remote threads when p9_mux_poll_stop()
from p9_conn_destroy() from p9_fd_close() is called. Therefore, calling
set_thread_flag(TIF_SIGPENDING)/recalc_sigpending() every time would be
needed if we count on signals for making kernel_read()/kernel_write()
non-blocking.
Link: https://lkml.kernel.org/r/345de429-a88b-7097-d177-adecf9fed342@I-love.SAKURA.ne.jp
Link: https://syzkaller.appspot.com/bug?extid=8b41a1365f1106fd0f33 [1]
Reported-by: syzbot <syzbot+8b41a1365f1106fd0f33@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+8b41a1365f1106fd0f33@syzkaller.appspotmail.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
[Dominique: add comment at Christian's suggestion]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
Pull iomap updates from Darrick Wong:
"It's pretty quiet this time around -- a UAF bugfix and a new
tracepoint so we can watch file writeback:
- Fix a UAF bug when recording writeback mapping errors
- Add a tracepoint so that we can monitor writeback mappings"
* tag 'iomap-6.1-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: add a tracepoint for mappings returned by map_blocks
iomap: iomap: fix memory corruption when recording errors during writeback
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"The first two changes involve files outside of fs/ext4:
- submit_bh() can never return an error, so change it to return void,
and remove the unused checks from its callers
- fix I_DIRTY_TIME handling so it will be set even if the inode
already has I_DIRTY_INODE
Performance:
- Always enable i_version counter (as btrfs and xfs already do).
Remove some uneeded i_version bumps to avoid unnecessary nfs cache
invalidations
- Wake up journal waiters in FIFO order, to avoid some journal users
from not getting a journal handle for an unfairly long time
- In ext4_write_begin() allocate any necessary buffer heads before
starting the journal handle
- Don't try to prefetch the block allocation bitmaps for a read-only
file system
Bug Fixes:
- Fix a number of fast commit bugs, including resources leaks and out
of bound references in various error handling paths and/or if the
fast commit log is corrupted
- Avoid stopping the online resize early when expanding a file system
which is less than 16TiB to a size greater than 16TiB
- Fix apparent metadata corruption caused by a race with a metadata
buffer head getting migrated while it was trying to be read
- Mark the lazy initialization thread freezable to prevent suspend
failures
- Other miscellaneous bug fixes
Cleanups:
- Break up the incredibly long ext4_full_super() function by
refactoring to move code into more understandable, smaller
functions
- Remove the deprecated (and ignored) noacl and nouser_attr mount
option
- Factor out some common code in fast commit handling
- Other miscellaneous cleanups"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (53 commits)
ext4: fix potential out of bound read in ext4_fc_replay_scan()
ext4: factor out ext4_fc_get_tl()
ext4: introduce EXT4_FC_TAG_BASE_LEN helper
ext4: factor out ext4_free_ext_path()
ext4: remove unnecessary drop path references in mext_check_coverage()
ext4: update 'state->fc_regions_size' after successful memory allocation
ext4: fix potential memory leak in ext4_fc_record_regions()
ext4: fix potential memory leak in ext4_fc_record_modified_inode()
ext4: remove redundant checking in ext4_ioctl_checkpoint
jbd2: add miss release buffer head in fc_do_one_pass()
ext4: move DIOREAD_NOLOCK setting to ext4_set_def_opts()
ext4: remove useless local variable 'blocksize'
ext4: unify the ext4 super block loading operation
ext4: factor out ext4_journal_data_mode_check()
ext4: factor out ext4_load_and_init_journal()
ext4: factor out ext4_group_desc_init() and ext4_group_desc_free()
ext4: factor out ext4_geometry_check()
ext4: factor out ext4_check_feature_compatibility()
ext4: factor out ext4_init_metadata_csum()
ext4: factor out ext4_encoding_init()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull affs update from David Sterba:
"One minor update for AFFS, switching away from strlcpy"
* tag 'affs-for-6.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
affs: move from strlcpy with unused retval to strscpy
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"There's a bunch of performance improvements, most notably the FIEMAP
speedup, the new block group tree to speed up mount on large
filesystems, more io_uring integration, some sysfs exports and the
usual fixes and core updates.
Summary:
Performance:
- outstanding FIEMAP speed improvement
- algorithmic change how extents are enumerated leads to orders of
magnitude speed boost (uncached and cached)
- extent sharing check speedup (2.2x uncached, 3x cached)
- add more cancellation points, allowing to interrupt seeking in
files with large number of extents
- more efficient hole and data seeking (4x uncached, 1.3x cached)
- sample results:
256M, 32K extents: 4s -> 29ms (~150x)
512M, 64K extents: 30s -> 59ms (~550x)
1G, 128K extents: 225s -> 120ms (~1800x)
- improved inode logging, especially for directories (on dbench
workload throughput +25%, max latency -21%)
- improved buffered IO, remove redundant extent state tracking,
lowering memory consumption and avoiding rb tree traversal
- add sysfs tunable to let qgroup temporarily skip exact accounting
when deleting snapshot, leading to a speedup but requiring a rescan
after that, will be used by snapper
- support io_uring and buffered writes, until now it was just for
direct IO, with the no-wait semantics implemented in the buffered
write path it now works and leads to speed improvement in IOPS
(2x), throughput (2.2x), latency (depends, 2x to 150x)
- small performance improvements when dropping and searching for
extent maps as well as when flushing delalloc in COW mode
(throughput +5MB/s)
User visible changes:
- new incompatible feature block-group-tree adding a dedicated tree
for tracking block groups, this allows a much faster load during
mount and avoids seeking unlike when it's scattered in the extent
tree items
- this reduces mount time for many-terabyte sized filesystems
- conversion tool will be provided so existing filesystem can also
be updated in place
- to reduce test matrix and feature combinations requires no-holes
and free-space-tree (mkfs defaults since 5.15)
- improved reporting of super block corruption detected by scrub
- scrub also tries to repair super block and does not wait until next
commit
- discard stats and tunables are exported in sysfs
(/sys/fs/btrfs/FSID/discard)
- qgroup status is exported in sysfs
(/sys/sys/fs/btrfs/FSID/qgroups/)
- verify that super block was not modified when thawing filesystem
Fixes:
- FIEMAP fixes
- fix extent sharing status, does not depend on the cached status
where merged
- flush delalloc so compressed extents are reported correctly
- fix alignment of VMA for memory mapped files on THP
- send: fix failures when processing inodes with no links (orphan
files and directories)
- fix race between quota enable and quota rescan ioctl
- handle more corner cases for read-only compat feature verification
- fix missed extent on fsync after dropping extent maps
Core:
- lockdep annotations to validate various transactions states and
state transitions
- preliminary support for fs-verity in send
- more effective memory use in scrub for subpage where sector is
smaller than page
- block group caching progress logic has been removed, load is now
synchronous
- simplify end IO callbacks and bio handling, use chained bios
instead of own tracking
- add no-wait semantics to several functions (tree search, nocow,
flushing, buffered write
- cleanups and refactoring
MM changes:
- export balance_dirty_pages_ratelimited_flags"
* tag 'for-6.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (177 commits)
btrfs: set generation before calling btrfs_clean_tree_block in btrfs_init_new_buffer
btrfs: drop extent map range more efficiently
btrfs: avoid pointless extent map tree search when flushing delalloc
btrfs: remove unnecessary next extent map search
btrfs: remove unnecessary NULL pointer checks when searching extent maps
btrfs: assert tree is locked when clearing extent map from logging
btrfs: remove unnecessary extent map initializations
btrfs: remove the refcount warning/check at free_extent_map()
btrfs: add helper to replace extent map range with a new extent map
btrfs: move open coded extent map tree deletion out of inode eviction
btrfs: use cond_resched_rwlock_write() during inode eviction
btrfs: use extent_map_end() at btrfs_drop_extent_map_range()
btrfs: move btrfs_drop_extent_cache() to extent_map.c
btrfs: fix missed extent on fsync after dropping extent maps
btrfs: remove stale prototype of btrfs_write_inode
btrfs: enable nowait async buffered writes
btrfs: assert nowait mode is not used for some btree search functions
btrfs: make btrfs_buffered_write nowait compatible
btrfs: plumb NOWAIT through the write path
btrfs: make lock_and_cleanup_extent_if_need nowait compatible
...
|
|
Pull vfs constification updates from Al Viro:
"whack-a-mole: constifying struct path *"
* tag 'pull-path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ecryptfs: constify path
spufs: constify path
nd_jump_link(): constify path
audit_init_parent(): constify path
__io_setxattr(): constify path
do_proc_readlink(): constify path
overlayfs: constify path
fs/notify: constify path
may_linkat(): constify path
do_sys_name_to_handle(): constify path
->getprocattr(): attribute name is const char *, TYVM...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc tomoyo changes from Al Viro:
"A couple of assorted tomoyo patches"
* tag 'pull-tomoyo' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
tomoyo: struct path it might get from LSM callers won't have NULL dentry or mnt
tomoyo: use vsnprintf() properly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull file_inode() updates from Al Vrio:
"whack-a-mole: cropped up open-coded file_inode() uses..."
* tag 'pull-file_inode' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
orangefs: use ->f_mapping
_nfs42_proc_copy(): use ->f_mapping instead of file_inode()->i_mapping
dma_buf: no need to bother with file_inode()->i_mapping
nfs_finish_open(): don't open-code file_inode()
bprm_fill_uid(): don't open-code file_inode()
sgx: use ->f_mapping...
exfat_iterate(): don't open-code file_inode(file)
ibmvmc: don't open-code file_inode()
|
|
Pull vfs file updates from Al Viro:
"struct file-related stuff"
* tag 'pull-file' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
dma_buf_getfile(): don't bother with ->f_flags reassignments
Change calling conventions for filldir_t
locks: fix TOCTOU race when granting write lease
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs d_path updates from Al Viro.
* tag 'pull-d_path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
d_path.c: typo fix...
dynamic_dname(): drop unused dentry argument
|
|
Pull vfs inode update from Al Viro:
"Saner inode_init_always(), also fixing a nilfs problem"
* tag 'pull-inode' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: fix UAF/GPF bug in nilfs_mdt_destroy
|
|
Trvial merge conflicts against rdma.git for-rc resolved matching
linux-next:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c
drivers/infiniband/hw/hns/hns_roce_main.c
https://lore.kernel.org/r/20220929124005.105149-1-broonie@kernel.org
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
- Add Mahesh J Salgaonkar as EEH maintainer
- Add Manivannan Sadhasivam as PCI Endpoint reviewer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"Several documentation fixes, UML related cleanups, and a feature to
enable/disable KUnit tests
This includes the change to rename all_test_uml.config, and use it for
'--alltests'. Note: if anyone was using all_tests_uml.config, this
change breaks them.
This change simplifies the usage and eliminates the need to type:
--kunitconfig=tools/testing/kunit/configs/all_tests_uml.config
A simple workaround to create a symlink to the new name can solve the
problem for anyone using all_tests_uml.config.
all_tests_uml.config should work across ~all architectures"
* tag 'linux-kselftest-kunit-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: Kunit: Use full path to .kunitconfig
kunit: tool: rename all_test_uml.config, use it for --alltests
kunit: tool: remove UML specific options from all_tests_uml.config
lib: stackinit: update reference to kunit-tool
lib: overflow: update reference to kunit-tool
Documentation: KUnit: update links in the index page
Documentation: KUnit: add intro to the getting-started page
Documentation: KUnit: Reword start guide for selecting tests
Documentation: KUnit: add note about mrproper in start.rst
Documentation: KUnit: avoid repeating "kunit.py run" in start.rst
Documentation: KUnit: remove duplicated docs for kunit_tool
Documentation: Kunit: Add ref for other kinds of tests
Documentation: KUnit: Fix non-uml anchor
Documentation: Kunit: Fix inconsistent titles
Documentation: kunit: fix trivial typo
kunit: no longer call module_info(test, "Y") for kunit modules
kunit: add kunit.enable to enable/disable KUnit test
kunit: tool: make --raw_output=kunit (aka --raw_output) preserve leading spaces
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"Fixes and new tests:
- Add an amd-pstate-ut test module, used by kselftest to unit test
amd-pstate functionality
- Fixes and cleanups to to cpu-hotplug to delete the fault injection
test code
- Improvements to vm test to use top_srcdir for builds"
* tag 'linux-kselftest-next-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
docs:kselftest: fix kselftest_module.h path of example module
cpufreq: amd-pstate: Add explanation for X86_AMD_PSTATE_UT
selftests/cpu-hotplug: Add log info when test success
selftests/cpu-hotplug: Reserve one cpu online at least
selftests/cpu-hotplug: Delete fault injection related code
selftests/cpu-hotplug: Use return instead of exit
selftests/cpu-hotplug: Correct log info
cpufreq: amd-pstate: modify type in argument 2 for filp_open
Documentation: amd-pstate: Add unit test introduction
selftests: amd-pstate: Add test trigger for amd-pstate driver
cpufreq: amd-pstate: Add test module for amd-pstate driver
cpufreq: amd-pstate: Expose struct amd_cpudata
selftests/vm: use top_srcdir instead of recomputing relative paths
|
|
A few fields are missing in the usage message printed when an unknown
field option is passed. Add them to the list.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20221006153946.7816-9-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
A hw component to track outstanding L1 Data Cache misses is called LFB
(Line Fill Buffer) on Intel and Arm. However similar component exists on
other arch with different names, for ex, it's called MAB (Miss Address
Buffer) on AMD. Use 'LFB/MAB' instead of just 'LFB'.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20221006153946.7816-8-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The 'perf mem' and 'perf c2c' tools can be used with 3 different events:
load, store and combined load-store. Some architectures might support
only partial set of events in which case, perf prints an empty line for
unsupported events. Avoid that.
Ex, AMD Zen cpus supports only combined load-store event and does not
support individual load and store event.
Before patch:
$ perf mem record -e list
mem-ldst : available
$
After patch:
$ perf mem record -e list
mem-ldst : available
$
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20221006153946.7816-7-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The 'perf mem' and 'perf c2c' tools are wrappers around 'perf record'
with mem load/ store events. IBS tagged load/store sample provides most
of the information needed for these tools. Wire in the "ibs_op//" event
as mem-ldst event for AMD.
There are some limitations though: Only load/store micro-ops provide
mem/c2c information. Whereas, IBS does not have a way to choose a
particular type of micro-op to tag. This results in many non-LS
micro-ops being tagged which appear as N/A in the perf report. IBS,
being an uncore pmu from kernel point of view[1], does not support per
process monitoring. Thus, perf mem/c2c on AMD are currently supported in
per-cpu mode only.
Example:
$ sudo perf mem record -- -c 10000
^C[ perf record: Woken up 227 times to write data ]
[ perf record: Captured and wrote 58.760 MB perf.data (836978 samples) ]
$ sudo perf mem report -F mem,sample,snoop
Samples: 836K of event 'ibs_op//', Event count (approx.): 8418762
Memory access Samples Snoop
N/A 700620 N/A
L1 hit 126675 N/A
L2 hit 424 N/A
L3 hit 664 HitM
L3 hit 10 N/A
Local RAM hit 2 N/A
Remote RAM (1 hop) hit 8558 N/A
Remote Cache (1 hop) hit 3 N/A
Remote Cache (1 hop) hit 2 HitM
Remote Cache (2 hops) hit 10 HitM
Remote Cache (2 hops) hit 6 N/A
Uncached hit 4 N/A
$
[1]: https://lore.kernel.org/lkml/20220829113347.295-1-ravi.bangoria@amd.com
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20221006153946.7816-6-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently perf sets PERF_SAMPLE_WEIGHT flag only for mem load events.
Set it for combined load-store event as well which will enable recording
of load latency by default on arch that does not support independent
mem load event.
Also document missing -W in perf-record man page.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20221006153946.7816-5-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add support for printing these new fields in perf mem report.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20221006153946.7816-4-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Although new details added into this header is currently used by kernel
only, tools copy needs to be in sync with kernel file to avoid
tools/perf/check-headers.sh warnings.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20221006153946.7816-3-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Two new fields for mem_lvl_num has been introduced: PERF_MEM_LVLNUM_IO
and PERF_MEM_LVLNUM_CXL which are required to support perf mem/c2c on
AMD platform.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20221006153946.7816-2-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"This contains a series from Linus Walleij to unify the linux/io.h
interface by making the ia64, alpha, parisc and sparc include
asm-generic/io.h.
All functions provided by the generic header are now available to all
drivers, but the architectures can still override this.
For the moment, mips and sh still don't include asm-generic/io.h but
provide a full set of functions themselves.
There are also a few minor cleanups unrelated to this"
* tag 'asm-generic-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
alpha: add full ioread64/iowrite64 implementation
parisc: Drop homebrewn io[read|write]64_[lo_hi|hi_lo]
parisc: hide ioread64 declaration on 32-bit
ia64: export memory_add_physaddr_to_nid to fix cxl build error
asm-generic: Remove empty #ifdef SA_RESTORER
parisc: Use the generic IO helpers
parisc: Remove 64bit access on 32bit machines
sparc: Fix the generic IO helpers
alpha: Use generic <asm-generic/io.h>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- arm64 perf: DDR PMU driver for Alibaba's T-Head Yitian 710 SoC, SVE
vector granule register added to the user regs together with SVE perf
extensions documentation.
- SVE updates: add HWCAP for SVE EBF16, update the SVE ABI
documentation to match the actual kernel behaviour (zeroing the
registers on syscall rather than "zeroed or preserved" previously).
- More conversions to automatic system registers generation.
- vDSO: use self-synchronising virtual counter access in gettimeofday()
if the architecture supports it.
- arm64 stacktrace cleanups and improvements.
- arm64 atomics improvements: always inline assembly, remove LL/SC
trampolines.
- Improve the reporting of EL1 exceptions: rework BTI and FPAC
exception handling, better EL1 undefs reporting.
- Cortex-A510 erratum 2658417: remove BF16 support due to incorrect
result.
- arm64 defconfig updates: build CoreSight as a module, enable options
necessary for docker, memory hotplug/hotremove, enable all PMUs
provided by Arm.
- arm64 ptrace() support for TPIDR2_EL0 (register provided with the SME
extensions).
- arm64 ftraces updates/fixes: fix module PLTs with mcount, remove
unused function.
- kselftest updates for arm64: simple HWCAP validation, FP stress test
improvements, validation of ZA regs in signal handlers, include
larger SVE and SME vector lengths in signal tests, various cleanups.
- arm64 alternatives (code patching) improvements to robustness and
consistency: replace cpucap static branches with equivalent
alternatives, associate callback alternatives with a cpucap.
- Miscellaneous updates: optimise kprobe performance of patching
single-step slots, simplify uaccess_mask_ptr(), move MTE registers
initialisation to C, support huge vmalloc() mappings, run softirqs on
the per-CPU IRQ stack, compat (arm32) misalignment fixups for
multiword accesses.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (126 commits)
arm64: alternatives: Use vdso/bits.h instead of linux/bits.h
arm64/kprobe: Optimize the performance of patching single-step slot
arm64: defconfig: Add Coresight as module
kselftest/arm64: Handle EINTR while reading data from children
kselftest/arm64: Flag fp-stress as exiting when we begin finishing up
kselftest/arm64: Don't repeat termination handler for fp-stress
ARM64: reloc_test: add __init/__exit annotations to module init/exit funcs
arm64/mm: fold check for KFENCE into can_set_direct_map()
arm64: ftrace: fix module PLTs with mcount
arm64: module: Remove unused plt_entry_is_initialized()
arm64: module: Make plt_equals_entry() static
arm64: fix the build with binutils 2.27
kselftest/arm64: Don't enable v8.5 for MTE selftest builds
arm64: uaccess: simplify uaccess_mask_ptr()
arm64: asm/perf_regs.h: Avoid C++-style comment in UAPI header
kselftest/arm64: Fix typo in hwcap check
arm64: mte: move register initialization to C
arm64: mm: handle ARM64_KERNEL_USES_PMD_MAPS in vmemmap_populate()
arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()
arm64/sve: Add Perf extensions documentation
...
|