summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-12-05s390/virtio: add BSD license to virtio-ccwMichael S. Tsirkin
The original intent of the virtio header relicensing from 2008 was to make sure anyone can implement compatible devices/drivers. The virtio-ccw was omitted by mistake. We have an ack from the only contributor as well as the maintainer from IBM, so it's not too late to fix that. Make it dual-licensed with GPLv2, as the whole kernel is GPL2. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-12-05drm/i915/gvt: fix off-by-one comparison of ring_idColin Ian King
The ring_id maximum boundary is being compared using the > operator instead of >=, leading to an off-by-one error and an out of bounds write into array vgpu->hws_pga[]. Fix this by simply using the correct comparison operator. Also re-work another comparison that uses the comparison > I915_NUM_ENGINES - 1 to use the >= idiom using to keep this consistent in this code. Detected by CoverityScan, CID#1462404 ("Out-of-bounds write") Fixes: a2ae95af9646 ("drm/i915/gvt: update CSB and CSB write pointer in virtual HWSP") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-12-05drm/i915/gvt: Add missing breaks in switch statementColin Ian King
The switch statement is missing breaks for the cases of GVT_FAILSAFE_INSUFFICIENT_RESOURCE and GVT_FAILSAFE_GUEST_ERR. Add them in. Detected by CoverityScan, CID#1462416 ("Missing break in switch") Fixes: e011c6ce2b4f ("drm/i915/gvt: Add VM healthy check for workload_thread") Fixes: a33fc7a0482a ("drm/i915/gvt: enter failsafe mode when guest requires more resources") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-12-04scsi: scsi_devinfo: cleanly zero-pad devinfo stringsMartin Wilck
Cleanly fill memory for "vendor" and "model" with 0-bytes for the "compatible" case rather than adding only a single 0 byte. This simplifies the devinfo code a a bit, and avoids mistakes in other places of the code (not in current upstream, but we had one such mistake in the SUSE kernel). [mkp: applied by hand and added braces] Signed-off-by: Martin Wilck <mwilck@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-04scsi: scsi_devinfo: handle non-terminated stringsMartin Wilck
devinfo->vendor and devinfo->model aren't necessarily zero-terminated. Fixes: b8018b973c7c "scsi_devinfo: fixup string compare" Signed-off-by: Martin Wilck <mwilck@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-05Merge branch 'drm/next/du' of git://linuxtv.org/pinchartl/media into drm-nextDave Airlie
The series contains one patch that touches the V4L2 VSP driver. Mauro has acked it for merge through your tree, it doesn't conflict with anything scheduled for merge in v4.16 through Mauro's tree. * 'drm/next/du' of git://linuxtv.org/pinchartl/media: drm: rcar-du: Clip planes to screen boundaries drm: rcar-du: Share plane atomic check code between Gen2 and Gen3 v4l: vsp1: Start and stop DRM pipeline independently of planes drm: rcar-du: Remove unused CRTC suspend/resume functions drm: rcar-du: Implement system suspend/resume support drm: rcar-du: Don't set connector DPMS property drm: rcar-du: Add R8A7745 support drm: rcar-du: Add R8A7743 support dt-bindings: display: rcar-du: Document R8A774[35] DU
2017-12-04Revert "cgroup/cpuset: remove circular dependency deadlock"Tejun Heo
This reverts commit aa24163b2ee5c92120e32e99b5a93143a0f4258e. This and the following commit led to another circular locking scenario and the scenario which is fixed by this commit no longer exists after e8b3f8db7aad ("workqueue/hotplug: simplify workqueue_offline_cpu()") which removes work item flushing from hotplug path. Revert it for now. Signed-off-by: Tejun Heo <tj@kernel.org>
2017-12-04workqueue/hotplug: remove the workaround in rebind_workers()Lai Jiangshan
Since the cpu/hotplug refactoring, DOWN_FAILED is never called without preceding DOWN_PREPARE making the workaround unnecessary. Remove it. Signed-off-by: Lai Jiangshan <jiangshanlai@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-12-04workqueue/hotplug: simplify workqueue_offline_cpu()Lai Jiangshan
Since the recent cpu/hotplug refactoring, workqueue_offline_cpu() is guaranteed to run on the local cpu which is going offline. This also fixes the following deadlock by removing work item scheduling and flushing from CPU hotplug path. http://lkml.kernel.org/r/1504764252-29091-1-git-send-email-prsood@codeaurora.org tj: Description update. Signed-off-by: Lai Jiangshan <jiangshanlai@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-12-04Revert "cpuset: Make cpuset hotplug synchronous"Tejun Heo
This reverts commit 1599a185f0e6113be185b9fb809c621c73865829. This and the previous commit led to another circular locking scenario and the scenario which is fixed by this commit no longer exists after e8b3f8db7aad ("workqueue/hotplug: simplify workqueue_offline_cpu()") which removes work item flushing from hotplug path. Revert it for now. Signed-off-by: Tejun Heo <tj@kernel.org>
2017-12-04fbcon: Remove dmi quirk tableHans de Goede
This is now all handled in the drivers and communicated through fb_info.fbcon_rotate_hint. Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-8-hdegoede@redhat.com
2017-12-04efifb: Set info->fbcon_rotate_hint based on drm_get_panel_orientation_quirkHans de Goede
On some hardware the LCD panel is not mounted upright in the casing, but rotated by 90 degrees. In this case we want the console to automatically be rotated to compensate. The drm subsys has a quirk table for this, use the drm_get_panel_orientation_quirk function to get the panel orientation and set info->fbcon_rotate_hint based on this, so that the fbcon console on top of efifb gets automatically rotated to compensate for the panel orientation. Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-7-hdegoede@redhat.com
2017-12-04drm/i915: Add "panel orientation" property to the panel connector, v6.Hans de Goede
Ideally we could use the VBT for this, that would be simple, in intel_dsi_init() check dev_priv->vbt.dsi.config->rotation, set connector->display_info.panel_orientation accordingly and call drm_connector_init_panel_orientation_property(), done. Unfortunately vbt.dsi.config->rotation is always 0 even on tablets with an upside down LCD and where the GOP is properly rotating the EFI fb in hardware. So instead we end up reading the rotation from the primary plane. This commit only implements the panel orientation property for DSI panels on BYT / CHT hardware, as all known non normal oriented panels sofar are only found on this hardware. Changes in v2: -Read back the rotation applied by the GOP from the primary plane instead of relying on dev_priv->vbt.dsi.config->rotation, because it seems that the VBT rotation filed is always 0 even on devices where the GOP does apply a rotation Changes in v3: -Rewrite the code to read back the orientation from the primary plane to contain all of this in intel_dsi.c instead of poking a bunch of holes between all the different layers Changes in v6: -Move hardware readout to intel_dsi_init() Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-6-hdegoede@redhat.com
2017-12-04drm/fb-helper: Apply panel orientation connector prop to the primary plane, v6.Hans de Goede
Apply the "panel orientation" drm connector prop to the primary plane so that fbcon and fbdev using userspace programs display the right way up. Changes in v3: -Use a rotation member in struct drm_fb_helper_crtc and set that from drm_setup_crtcs instead of looping over all crtc's to find the right one later -Since we now no longer look at rotation quirks directly in the fbcon code, set fb_info.fbcon_rotate_hint when the panel is not mounted upright and we cannot use hardware rotation Changes in v4: -Make drm_fb_helper_init() init drm_fb_helper_crtc.rotation to DRM_MODE_ROTATE_0 for all crtcs, so that we do not end up setting the plane_state's rotation to an invalid value for disabled crtcs (caught by Fi.CI) Changes in v5: -Only use hardware (crtc primary plane) rotation for DRM_ROTATE_180, 90 / 270 degree rotation requires special handling which we lack atm -Add a TODO comment for 90 / 270 degree hardware rotation -Add some comments to better document the default case when mapping sw_rotations to fbcon_rotate_hints Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=94894 Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-5-hdegoede@redhat.com
2017-12-04drm: Add support for a panel-orientation connector property, v6Hans de Goede
On some devices the LCD panel is mounted in the casing in such a way that the up/top side of the panel does not match with the top side of the device (e.g. it is mounted upside-down). This commit adds the necessary infra for lcd-panel drm_connector-s to have a "panel orientation" property to communicate how the panel is orientated vs the casing. Userspace can use this property to check for non-normal orientation and then adjust the displayed image accordingly by rotating it to compensate. Changes in v2: -Store panel_orientation in drm_display_info, so that drm_fb_helper.c can access it easily -Have a single drm_connector_init_panel_orientation_property rather then create and attach functions. The caller is expected to set drm_display_info.panel_orientation before calling this, then this will check for platform specific quirks overriding the panel_orientation and if the panel_orientation is set after this then it will attach the property. Changes in v6: -Use an enum (with kerneldoc) rather then #defines for DRM_MODE_PANEL_ORIENTATION_* Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-4-hdegoede@redhat.com
2017-12-04drm: Add panel orientation quirks, v6.Hans de Goede
Some x86 clamshell design devices use portrait tablet screens and a display engine which cannot rotate in hardware, so the firmware just leaves things as is and we cannot figure out that the display is oriented non upright from the hardware. So at least on x86, we need a quirk table for this. This commit adds a DMI based quirk table which is initially populated with 5 such devices: Asus T100HA, GPD Pocket, GPD win, I.T.Works TW891 and the VIOS LTH17. This quirk table will be used by the drm code to let userspace know that the display is not mounted upright inside the devices case through a new panel orientation drm-connector property, as well as to tell fbcon to rotate the console so that it shows the right way up. Changes in v5: -Add a kernel-doc comment documenting drm_get_panel_orientation_quirk() -Remove board_* matches from the dmi-matches for the VIOS LTH17 laptop, keeping only the (identical) sys_vendor and product_name matches. This is necessary because an older version of the bios has board_vendor set to VOIS instead of VIOS Changes in v6: -Add reference to added kernel-docs in Documentation/gpu/drm-kms-helpers.rst Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-3-hdegoede@redhat.com
2017-12-04fbcon: Add fbcon_rotate_hint to struct fb_infoHans de Goede
On some hardware the LCD panel is not mounted upright in the casing, but upside-down or rotated 90 degrees. In this case we want the console to automatically be rotated to compensate. The fbdev-driver may know about the need to rotate. Add a new fbcon_rotate_hint field to struct fb_info, which gets initialized to -1. If the fbdev-driver knows that some sort of rotation is necessary then it can set this field to a FB_ROTATE_* value to tell the fbcon console driver to rotate the console. Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-2-hdegoede@redhat.com
2017-12-04libata: sata_down_spd_limit should return if driver has not recorded sstatus ↵David Milburn
speed During hotplug, it is possible for 6Gbps link speed to be limited all the way down to 1.5 Gbps which may lead to a slower link speed when drive is re-connected. This behavior has been seen on a Intel Lewisburg SATA controller (8086:a1d2) with HGST HUH728080ALE600 drive where SATA link speed was limited to 1.5 Gbps and when re-connected the link came up 3.0 Gbps. This patch was retested on above configuration and showed the hotplugged link to come back online at max speed (6Gbps). I did not see the downgrade when testing on Intel C600/X79, but retested patched linux-4.14-rc5 kernel and didn't see any side effects from this change. Also, successfully retested hotplug on port multiplier 3Gbps link. tj: Minor comment updates. Signed-off-by: David Milburn <dmilburn@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-12-04Merge tag 'docs-4.15-fixes' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation fixes from Jonathan Corbet: "A handful of documentation fixes. The most significant of these addresses a problem with the new warning mode: it can break the build when confronted with a source file containing malformed kerneldoc comments" * tag 'docs-4.15-fixes' of git://git.lwn.net/linux: Documentation: fix docs build error after source file removed scsi: documentation: Fix case of 'scsi_device' struct mention(s) genericirq.rst: Remove :c:func:`...` in code blocks dmaengine: doc : Fix warning "Title underline too short" while make xmldocs scripts/kernel-doc: Don't fail with status != 0 if error encountered with -none
2017-12-04amdgpu/dm: Remove fb_location form fill_plane_attributesHarry Wentland
We no longer set the framebuffer address here so this is now dead code. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amdgpu:fix gpu recover missing skipping(v2)Monk Liu
if app close CTX right after IB submit, gpu recover will fail to find out the entity behind this guilty job thus lead to no job skipping for this guilty job. to fix this corner case just move the increasement of job->karma out of the entity iteration. v2: only do karma increasment if bad->s_priority != KERNEL because we always consider KERNEL job be correct and always want to recover an unfinished kernel job (sometimes kernel job is interrupted by VF FLR or other GPU hang event) Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-By: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amdgpu:read VRAMLOST from gimMonk Liu
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amdgpu: bypass FB resizing for SRIOV VFpding
It introduces 900ms latency in exclusive mode which causes failure of driver loading. Host can resize the BAR before guest staring, so the resizing is not necessary here. Signed-off-by: Pixel Ding <Pixel.Ding@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amdgpu: release exclusive mode after hw_initpding
Signed-off-by: pding <Pixel.Ding@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amdkfd: initialise kfd inside amdgpu_device_initpding
Also finalize kfd inside amdgpu_device_fini. kfd device_init needs SRIOV exclusive accessing. Try to gather exclusive accessing to reduce time consuming. Signed-off-by: pding <Pixel.Ding@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amdgpu: don't use ttm_bo_move_ttm in amdgpu_ttm_bind v2Christian König
Just allocate the GART space and fill it. This prevents forcing the BO to be idle. v2: don't unbind/bind at all, just fill the allocated GART space Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amdgpu: rename amdgpu_ttm_bind to amdgpu_ttm_alloc_gartChristian König
We actually don't bind here, but rather allocate GART space if necessary. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amdgpu: switch to use new SOC15 reg read/write macros for soc15 ihHawking Zhang
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amdgpu: resize VRAM BAR for CPU access v6Christian König
Try to resize BAR0 to let CPU access all of VRAM. v2: rebased, style cleanups, disable mem decode before resize, handle gmc_v9 as well, round size up to power of two. v3: handle gmc_v6 as well, release and reassign all BARs in the driver. v4: rename new function to amdgpu_device_resize_fb_bar, reenable mem decoding only if all resources are assigned. v5: reorder resource release, return -ENODEV instead of BUG_ON(). v6: squash in rebase fix Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amdgpu: refine SR-IOV firmware VRAM reservation to protect dataHorace Chen
The previous solution will create a zero buffer on the system domain and then move the zeroes to the VRAM. This will break the original data on the VRAM. Refine the code to create bo on VRAM domain directly and then remove and re-create mem node to the exact position before bo_pin. This can avoid breaking the data and will not cause eviction. Signed-off-by: Horace Chen <horace.chen@amd.com> Reviewed-by: monk liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amdgpu: retry init if exclusive mode request is failedpding
This is caused of that hypervisor fails to handle request, one known issue is MMIO unblocking timeout. In theory we can retry init here. Signed-off-by: pding <Pixel.Ding@amd.com> Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amdgpu: return error when sriov access requests get timeoutpding
Reported-by: Sun Gary <Gary.Sun@amd.com> Signed-off-by: pding <Pixel.Ding@amd.com> Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Remove fb_location parameter from get_fb_infoMichel Dänzer
It's dead code. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04amdgpu: Remove AMDGPU_{HPD,CRTC_IRQ,PAGEFLIP_IRQ}_LASTMichel Dänzer
Not used anymore. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Use real number of CRTCs and HPDs in set_irq_funcsMichel Dänzer
Corresponding to the previous non-DC change. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04amdgpu/dce: Use actual number of CRTCs and HPDs in set_irq_funcsMichel Dänzer
Hardcoding the maximum numbers could result in spurious error messages from the IRQ state callbacks, e.g. on Polaris 11/12: [drm:dce_v11_0_set_pageflip_irq_state [amdgpu]] *ERROR* invalid pageflip crtc 5 [drm:amdgpu_irq_disable_all [amdgpu]] *ERROR* error disabling interrupt (-22) Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Move conn_state to headerHarry Wentland
We'll need it in amdgpu_dm_mst_types.c as well. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: dal 3.1.10Tony Cheng
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: correct DP is always in full range or bt609Charlene Liu
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: fix bug from last commit for hubbubYue Hin Lau
fix memory leak Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Move hdr_metadata from plane to streamAnthony Koo
Need to move HDR Metadata from Surface to Stream since there is only one infoframe possible per stream. Also cleaning up some duplicate definitions. Signed-off-by: Anthony Koo <anthony.koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Apply VQ adjustments in MPO caseSivapiriyanKumarasamy
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: create new structure for hubbubYue Hin Lau
instantiating new structure hubbub in resource.c Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: dal 3.1.09Tony Cheng
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Added disconnect dchub.Yongqiang Sun
Add disable ttu interface to dcn10, when remove mpc, disable ttu as well. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: dal 3.1.08Tony Cheng
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Not reset front end when program back end.Yongqiang Sun
Since front end is programmed before back end programming, no need to reset front end in back end programming. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Power down front end in init_hw.Yongqiang Sun
front end is initialized during init_hw, but not power gated. There are some left over valuse and will cause some diags test failed. Power gated all front end pipes will make sure every test has same starting point. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Reject PPLib clock values if they are invalidAndrew Jiang
We should be sticking with the default clock values if the values obtained from PPLib are bogus. Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: create new files for hubbub functionsYue Hin Lau
moving hubbub functions to new file Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-21 17:42:42 +0000