summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-03-11drm/amdgpu: NULL-check BO's backing store when determining GFX12 PTE flagsNatalie Vock
PRT BOs may not have any backing store, so bo->tbo.resource will be NULL. Check for that before dereferencing. Fixes: 0cce5f285d9a ("drm/amdkfd: Check correct memory types for is_system variable") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Natalie Vock <natalie.vock@gmx.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-11drm/amdgpu: finish wiring up sid.h in DCE6Alexandre Demers
For coherence with DCE8 et DCE10, add or move some values under sid.h and remove duplicated from si_enums.h. Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-11drm/amd/amdkfd: Evict all queues even HWS remove queue failedYifan Zha
[Why] If reset is detected and kfd need to evict working queues, HWS moving queue will be failed. Then remaining queues are not evicted and in active state. After reset done, kfd uses HWS to termination remaining activated queues but HWS is resetted. So remove queue will be failed again. [How] Keep removing all queues even if HWS returns failed. It will not affect cpsch as it checks reset_domain->sem. v2: If any queue failed, evict queue returns error. v3: Declare err inside the if-block. Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-11drm/amdgpu: fix SI's GB_ADDR_CONFIG_GOLDEN values and wire up sid.h in GFX6Alexandre Demers
By wiring up sid.h in GFX6, we end up with a few duplicated defines such as the golden registers. Let's clean this up. [TAHITI,VERDE, HAINAN]_GB_ADDR_CONFIG_GOLDEN were defined both in sid.h and under si_enums.h, with different values. Keep the values used under radeon and move them under gfx_v6_0.c where they are used (as it is done under cik) Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-11drm/amdgpu: prepare DCE6 uniformisation with DCE8 and DCE10Alexandre Demers
Let's begin the cleanup in sid.h to prevent warnings and errors when wiring sid.h into dce_v6_0.c. This is a bigger cleanup. Many defines found under sid.h have already been properly moved into the different "_d.h" and "_sh_mask.h", so they should have been already removed from sid.h and properly linked in where needed. Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-11drm/amdkfd: delete stray tab in kfd_dbg_set_mes_debug_mode()Dan Carpenter
These lines are indented one tab more than they should be. Delete the stray tabs. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-11drm/amdgpu/gfx: delete stray tabsDan Carpenter
These lines are indented one tab too far. Delete the extra tabs. Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-11drm/i915: Increase I915_PARAM_MMAP_GTT_VERSION version to indicate support ↵José Roberto de Souza
for partial mmaps Commit 255fc1703e42 ("drm/i915/gem: Calculate object page offset for partial memory mapping") was the last patch of several patches fixing multiple partial mmaps. But without a bump in I915_PARAM_MMAP_GTT_VERSION there is no clean way for UMD to know if it can do multiple partial mmaps. Fixes: 255fc1703e42 ("drm/i915/gem: Calculate object page offset for partial memory mapping") Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250306210827.171147-1-jose.souza@intel.com
2025-03-11Merge tag 'drm-intel-next-2025-03-10' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next drm/i915 feature pull #2 for v6.15: Features and functionality: - FBC dirty rectangle support for display version 30+ (Vinod) - Update plane scalers via DSB based commits (Ville) - Move runtime power status info to display power debugfs (Jani) Refactoring and cleanups: - Convert i915 and xe to DRM client setup (Thomas) - Refactor and clean up CDCLK/bw/dbuf readout/sanitation (Ville) - Conversions from drm_i915_private to struct intel_display (Jani, Suraj) - Refactor display reset for better separation between display and core (Jani) - Move panel fitter code together (Jani) - Add mst and hdcp sub-structs to display structs for clarity (Jani) - Header refactoring to clarify separation between display and i915 core (Jani) Fixes: - Fix DP MST max stream count to match number of pipes (Jani) - Fix encoder HW state readout of DP MST UHBR (Imre) - Fix ICL+ combo PHY cursor and coeff polarity programming (Ville) - Fix pipeDMC and ATS fault handling (Ville) - Display workarounds (Gustavo) - Remove duplicate forward declaration (Vinod) - Improve POWER_DOMAIN_*() macro type safety (Gustavo) - Move CDCLK post plane programming later (Ville) DRM core changes: - Add client-hotplug helper (Thomas) - Send pending hotplug events after client resume (Thomas) - Add fb_restore and fb_set_suspend fb helper hooks (Thomas) - Remove struct fb_probe fb helper hook (Thomas) - Add const qualifier to drm_atomic_helper_damage_merged() (Vinod) Xe driver changes: - Convert i915 and xe to DRM client setup (Thomas) - Refactor i915 compat headers (Jani) - Fix fbdev GGTT mapping handling (Maarten) - Figure out pxp instance from the gem object (Jani) Merges: - Backmerge drm-next to fix conflicts with drm-xe-next (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87o6y9gpub.fsf@intel.com
2025-03-11Merge tag 'drm-xe-next-2025-03-07' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next UAPI Changes: - Expose per-engine activity via perf pmu (Riana, Lucas, Umesh) - Add support for EU stall sampling (Harish, Ashutosh) - Allow userspace to provide low latency hint for submission (Tejas) - GPU SVM and Xe SVM implementation (Matthew Brost) Cross-subsystem Changes: - devres handling for component drivers (Lucas) - Backmege drm-next to allow cross dependent change with i915 - GPU SVM and Xe SVM implementation (Matthew Brost) Core Changes: Driver Changes: - Fixes to userptr and missing validations (Matthew Auld, Thomas Hellström, Matthew Brost) - devcoredump typos and error handling improvement (Shuicheng) - Allow oa_exponent value of 0 (Umesh) - Finish moving device probe to devm (Lucas) - Fix race between submission restart and scheduled being freed (Tejas) - Fix counter overflows in gt_stats (Francois) - Refactor and add missing workarounds and tunings for pre-Xe2 platforms (Aradhya, Tvrtko) - Fix PXP locks interaction with exec queues being killed (Daniele) - Eliminate TIMESTAMP_OVERRIDE from xe (Matt Roper) - Change xe_gen_wa_oob to allow building on MacOS (Daniel Gomez) - New workarounds for Panther Lake (Tejas) - Fix VF resume errors (Satyanarayana) - Fix workaround infra skipping some workarounds dependent on engine initialization (Tvrtko) - Improve per-IP descriptors (Gustavo) - Add more error injections to probe sequence (Francois) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ilc5jvtyaoyi6woyhght5a6sw5jcluiojjueorcyxbynrcpcjp@mw2mi6rd6a7l
2025-03-11Merge tag 'drm-msm-next-2025-03-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next Updates for v6.15 GPU: - Fix obscure GMU suspend failure - Expose syncobj timeline support - Extend GPU devcoredump with pagetable info - a623 support - Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot / devcoredump Display: - Add cpu-cfg interconnect paths on SM8560 and SM8650 - Introduce KMS OMMU fault handler, causing devcoredump snapshot - Fixed error pointer dereference in msm_kms_init_aspace() DPU: - Fix mode_changing handling - Add writeback support on SM6150 (QCS615) - Fix DSC programming in 1:1:1 topology - Reworked hardware resource allocation, moving it to the CRTC code - Enabled support for Concurrent WriteBack (CWB) on SM8650 - Enabled CDM blocks on all relevant platforms - Reworked debugfs interface for BW/clocks debugging - Clear perf params before calculating bw - Support YUV formats on writeback - Fixed double inclusion - Fixed writeback in YUV formats when using cloned output, Dropped wb2_formats_rgb - Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt kerneldocs - Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode() DSI: - DSC-related fixes - Rework clock programming DSI PHY: - Fix 7nm (and lower) PHY programming - Add proper DT schema definitions for DSI PHY clocks HDMI: - Rework the driver, enabling the use of the HDMI Connector framework Bindings: - Added eDP PHY on SA8775P Misc: - mailmap/MAINTAINERS: update Dmitry's email addr Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGu-rbEFzQQ-me6qRLgBOJ=Xro1PL=PhtKJ-K9=bCaiK0w@mail.gmail.com
2025-03-10drm/amdgpu: Trigger a wedged event for ring resetAndré Almeida
Instead of only triggering a wedged event for complete GPU resets, trigger for ring resets. Regardless of the reset, it's useful for userspace to know that it happened because the kernel will reject further submissions from that app. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: André Almeida <andrealmeid@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amdgpu/vce2: fix ip block referenceAlex Deucher
Need to use the correct IP block type. VCE vs VCN. Fixes mclk issues on Hawaii. Suggested by selendym. Fixes: 82ae6619a450 ("drm/amdgpu: update the handle ptr in wait_for_idle") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3997 Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com> Cc: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: change kzalloc to kcalloc in dml1_validate()Ethan Carter Edwards
We are trying to get rid of all multiplications from allocation functions to prevent integer overflows. Here the multiplication is probably safe, but using kcalloc() is more appropriate and improves readability. This patch has no effect on runtime behavior. Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: change kzalloc to kcalloc in dcn314_validate_bandwidth()Ethan Carter Edwards
We are trying to get rid of all multiplications from allocation functions to prevent integer overflows. Here the multiplication is probably safe, but using kcalloc() is more appropriate and improves readability. This patch has no effect on runtime behavior. Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: change kzalloc to kcalloc in dcn31_validate_bandwidth()Ethan Carter Edwards
We are trying to get rid of all multiplications from allocation functions to prevent integer overflows. Here the multiplication is probably safe, but using kcalloc() is more appropriate and improves readability. This patch has no effect on runtime behavior. Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: change kzalloc to kcalloc in dcn30_validate_bandwidth()Ethan Carter Edwards
We are trying to get rid of all multiplications from allocation functions to prevent integer overflows. Here the multiplication is probably safe, but using kcalloc() is more appropriate and improves readability. This patch has no effect on runtime behavior. Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Promote DAL to 3.2.324Taimur Hassan
This version brings along following fixes: - Fix some Replay/PSR issue - Fix backlight brightness - Fix suspend issue - Fix visual confirm color - Add scoped mutexes for amdgpu_dm_dhcp Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: remove minimum Dispclk and apply oem panel timing.Charlene Liu
[why & how] 1. apply oem panel timing (not only on OLED) 2. remove MIN_DPP_DISP_CLK request in driver. This fix will apply for dcn31x but not sync with DML's output. Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Drop unnecessary ret variable for enable_assr()Mario Limonciello
[Why] enable_assr() has a res variable that only is changed in one block with no cleanup necessary. [How] Remove variable and return early from failure cases. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Add scoped mutexes for amdgpu_dm_dhcpMario Limonciello
[Why] Guards automatically release mutex when it goes out of scope making code easier to follow. [How] Replace all use of mutex_lock()/mutex_unlock() with guard(mutex). Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Fix slab-use-after-free on hdcp_workMario Limonciello
[Why] A slab-use-after-free is reported when HDCP is destroyed but the property_validate_dwork queue is still running. [How] Cancel the delayed work when destroying workqueue. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4006 Fixes: da3fd7ac0bcf ("drm/amd/display: Update CP property based on HW query") Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Prevent VStartup OverflowRyan Seto
[Why] For some VR headsets with large blanks, it's possible to overflow the OTG_VSTARTUP_PARAM:VSTARTUP_START register. This can lead to incorrect DML calculations and underflow downstream. [How] Min the calcualted max_vstartup_lines with the max value of the register. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Correct timing_adjust_pending flag setting.Zhongwei Zhang
[Why&How] stream->adjust will be overwritten by update->crtc_timing_adjust. We should set update->crtc_timing_adjust->timing_adjust_pending and then overwrite stream->adjust. Reset update->crtc_timing_adjust->timing_adjust_pending after the assignment. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: calculate the remain segments for all pipesZhikai Zhai
[WHY] In some cases the remain de-tile buffer segments will be greater than zero if we don't add the non-top pipe to calculate, at this time the override de-tile buffer size will be valid and used. But it makes the de-tile buffer segments used finally for all of pipes exceed the maximum. [HOW] Add the non-top pipe to calculate the remain de-tile buffer segments. Don't set override size to use the average according to pipe count if the value exceed the maximum. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Fix visual confirm color not updatingLeo Zeng
[WHY] Sometimes visual confirm color is updated, but the background color is not changed. This causes visual confrim to show incorrect colors. [HOW] Update background color when visual confirm color changes. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Leo Zeng <Leo.Zeng@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Assign normalized_pix_clk when color depth = 14Alex Hung
[WHY & HOW] A warning message "WARNING: CPU: 4 PID: 459 at ... /dc_resource.c:3397 calculate_phy_pix_clks+0xef/0x100 [amdgpu]" occurs because the display_color_depth == COLOR_DEPTH_141414 is not handled. This is observed in Radeon RX 6600 XT. It is fixed by assigning pix_clk * (14 * 3) / 24 - same as the rests. Also fixes the indentation in get_norm_pix_clk. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Add Support for reg inbox0 for host->DMUB CMDsDillon Varone
[WHY] DCN4+ supports a new register based mailbox for sending messages from host to DMCUB. This mailbox supports 64 byte commands, which makes it compatible with the same structure as the frame buffer based mailbox. [HOW] The intention for reg_inbox0 is to be slot in replacement for the frame buffer based mailbox (Inbox1). It supports all of the required features: - Supports all messages handled by FB Inbox1 - Supports multi command batching Reviewed-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: assume VBIOS supports DSC as defaultCharlene Liu
[Why & How] The clear_dsc_setting at boot logic was based on dcn version check. As such new ASIC lost this DSC clear up logic, change the assumption to BIOS support eDP DSC for new ASIC. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Implement PCON regulated autonomous mode handlingGeorge Shen
[Why/How] DP spec has been updated recently to make regulated autonomous mode more well-defined. In case any PCON vendors choose to implement regulated autonomous mode in the future, pre-emptively add handling for the regulated autonomous mode based on current spec. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: not abort link train when bw is lowPeichen Huang
[WHY] DP tunneling should not abort link train even bandwidth become too low after downgrade. Otherwise, it would fail compliance test. [HOW} Do link train with downgrade settings even bandwidth is not enough Reviewed-by: Cruise Hung <cruise.hung@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Do not enable replay when vtotal update is pending.Danny Wang
[Why&How] Vtotal is not applied to HW when handling vsync interrupt. Make sure vtotal is aligned before enable replay. Reviewed-by: Anthony Koo <anthony.koo@amd.com> Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Danny Wang <danny.wang@amd.com> Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Add and use new dm_prepare_suspend() callbackMario Limonciello
[Why] The displays currently don't get turned off until after other IP blocks have been suspended. However turning off the displays first gives a very visible response that the system is on it's way down. [How] Turn off displays in a prepare_suspend() callback instead when possible. This will help for suspend and hibernate sequences. The shutdown sequence however will not call prepare() so check whether the state has been already saved to decide what to do. Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Restore correct backlight brightness after a GPU resetMario Limonciello
[Why] GPU reset will attempt to restore cached state, but brightness doesn't get restored. It will come back at 100% brightness, but userspace thinks it's the previous value. [How] When running resume sequence if GPU is in reset restore brightness to previous value. Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: fix default brightnessMario Limonciello
[Why] To avoid flickering during boot default brightness level set by BIOS should be maintained for as much of the boot as feasible. commit 2fe87f54abdc ("drm/amd/display: Set default brightness according to ACPI") attempted to set the right levels for AC vs DC, but brightness still got reset to maximum level in initialization code for setup_backlight_device(). [How] Remove the hardcoded initialization in setup_backlight_device() and instead program brightness value to match BIOS (AC or DC). This avoids a brightness flicker from kernel changing the value. Userspace may however still change it during boot. Fixes: 2fe87f54abdc ("drm/amd/display: Set default brightness according to ACPI") Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Add more debug data to dmub_srvJoshua Aberback
[Why] When analyzing some crash dumps, not all of the expected DMUB info was available, so we want to add in-object storage for this data. [How] - dmub_srv_debug (renamed to dmub_timeout_info) is already a member of dmub_diagnostic_data, therefore keep a dmub_diagnostic_data directly in dmub_srv - use dmub_srv->debug when collecting diagnostic info instead of stack object to allow for easy inspection in crash dumps Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Disable unneeded hpd interrupts during dm_initLeo Li
[Why] It seems HPD interrupts are enabled by default for all connectors, even if the hpd source isn't valid. An eDP for example, does not have a valid hpd source (but does have a valid hpdrx source; see construct_phy()). Thus, eDPs should have their hpd interrupt disabled. In the past, this wasn't really an issue. Although the driver gets interrupted, then acks by writing to hw registers, there weren't any subscribed handlers that did anything meaningful (see register_hpd_handlers()). But things changed with the introduction of IPS. s2idle requires that the driver allows IPS for DMUB fw to put hw to sleep. Since register access requires hw to be awake, the driver will block IPS entry to do so. And no IPS means no hw sleep during s2idle. This was the observation on DCN35 systems with an eDP. During suspend, the eDP toggled its hpd pin as part of the panel power down sequence. The driver was then interrupted, and acked by writing to registers, blocking IPS entry. [How] Since DC marks eDP connections as having invalid hpd sources (see construct_phy()), DM should disable them at the hw level. Do so in amdgpu_dm_hpd_init() by disabling all hpd ints first, then selectively enabling ones for connectors that have valid hpd sources. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Fix incorrect DPCD configs while Replay/PSR switchLeon Huang
[Why] When switching between PSR/Replay, the DPCD config of previous mode is not cleared, resulting in unexpected behavior in TCON. [How] Initialize the DPCD in setup function Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Leon Huang <Leon.Huang1@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amdkfd: Add pm_config_dequeue_wait_counts APIHarish Kasiviswanathan
Update pm_update_grace_period() to more cleaner pm_config_dequeue_wait_counts(). Previously, grace_period variable was overloaded as a variable and a macro, making it inflexible to configure additional dequeue wait times. pm_config_dequeue_wait_counts() now takes in a cmd / variable. This allows flexibility to update different dequeue wait times. Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by: Jonathan Kim <jonathan.kim@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amdgpu/vcn: fix idle work handler for VCN 2.5Alex Deucher
VCN 2.5 uses the PG callback to enable VCN DPM which is a global state. As such, we need to make sure all instances are in the same state. v2: switch to a ref count (Lijo) v3: switch to its own idle work handler v4: fix logic in DPG handling Fixes: 4ce4fe27205c ("drm/amdgpu/vcn: use per instance callbacks for idle work handler") Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: allow 256B DCC max compressed block sizes on gfx12Marek Olšák
The hw supports it. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/appletbdrm: Fix ref-counting on dmadevThomas Zimmermann
Remove the put_device() call on dmadev. The driver sets the field without getting a reference, so it shouldn't put a reference either. The dmadev field points to the regular USB device for which DRM maintains a reference internally. Hence dmadev will not become dangling during the DRM device's lifetime. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 0670c2f56e45 ("drm/tiny: add driver for Apple Touch Bars in x86 Macs") Cc: Aditya Garg <gargaditya08@live.com> Cc: Aun-Ali Zaidi <admin@kodeit.net> Cc: dri-devel@lists.freedesktop.org Acked-by: Aditya Garg <gargaditya08@live.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250307083702.142675-1-tzimmermann@suse.de
2025-03-09Linux 6.14-rc6v6.14-rc6Linus Torvalds
2025-03-10Merge tag 'amd-drm-next-6.15-2025-03-07' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amdgpu: - Fix spelling typos - RAS updates - VCN 5.0.1 updates - SubVP fixes - DCN 4.0.1 fixes - MSO DPCD fixes - DIO encoder refactor - PCON fixes - Misc cleanups - DMCUB fixes - USB4 DP fixes - DM cleanups - Backlight cleanups and fixes - Support platform backlight curves - Misc code cleanups - SMU 14 fixes - JPEG 4.0.3 reset updates - SR-IOV fixes - SVM fixes - GC 12 DCC fixes - DC DCE 6.x fix - Hiberation fix amdkfd: - Fix possible NULL pointer in queue validation - Remove unnecessary CP domain validation - SDMA queue reset support - Add per process flags radeon: - Fix spelling typos - RS400 hyperZ fix UAPI: - Add KFD per process flags for setting precision Proposed user space: https://github.com/ROCm/ROCR-Runtime/commit/2a64fa5e06e80e0af36df4ce0c76ae52eeec0a9d Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250307211051.1880472-1-alexander.deucher@amd.com
2025-03-09Merge tag 'kbuild-fixes-v6.14-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Use the specified $(LD) when building userprogs with Clang - Pass the correct target triple when compile-testing UAPI headers with Clang - Fix pacman-pkg build error with KBUILD_OUTPUT * tag 'kbuild-fixes-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: install-extmod-build: Fix build when specifying KBUILD_OUTPUT docs: Kconfig: fix defconfig description kbuild: hdrcheck: fix cross build with clang kbuild: userprogs: use correct lld when linking through clang
2025-03-09Merge tag 'usb-6.14-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB driver fixes for some reported issues. These contain: - typec driver fixes - dwc3 driver fixes - xhci driver fixes - renesas controller fixes - gadget driver fixes - a new USB quirk added All of these have been in linux-next with no reported issues" * tag 'usb-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: ucsi: Fix NULL pointer access usb: quirks: Add DELAY_INIT and NO_LPM for Prolific Mass Storage Card Reader usb: xhci: Fix host controllers "dying" after suspend and resume usb: dwc3: Set SUSPENDENABLE soon after phy init usb: hub: lack of clearing xHC resources usb: renesas_usbhs: Flush the notify_hotplug_work usb: renesas_usbhs: Use devm_usb_get_phy() usb: renesas_usbhs: Call clk_put() usb: dwc3: gadget: Prevent irq storm when TH re-executes usb: gadget: Check bmAttributes only if configuration is valid xhci: Restrict USB4 tunnel detection for USB3 devices to Intel hosts usb: xhci: Enable the TRB overfetch quirk on VIA VL805 usb: gadget: Fix setting self-powered state on suspend usb: typec: ucsi: increase timeout for PPM reset operations acpi: typec: ucsi: Introduce a ->poll_cci method usb: typec: tcpci_rt1711h: Unmask alert interrupts to fix functionality usb: gadget: Set self-powered based on MaxPower and bmAttributes usb: gadget: u_ether: Set is_suspend flag if remote wakeup fails usb: atm: cxacru: fix a flaw in existing endpoint checks
2025-03-09Merge tag 'driver-core-6.14-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is a single driver core fix that resolves a reported memory leak. It's been in linux-next for 2 weeks now with no reported problems" * tag 'driver-core-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: drivers: core: fix device leak in __fw_devlink_relax_cycles()
2025-03-09Merge tag 'char-misc-6.14-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc/IIO driver fixes from Greg KH: "Here are a number of misc and char and iio driver fixes that have been sitting in my tree for way too long. They contain: - iio driver fixes for reported issues - regression fix for rtsx_usb card reader - mei and mhi driver fixes - small virt driver fixes - ntsync permissions fix - other tiny driver fixes for reported problems. All of these have been in linux-next for quite a while with no reported issues" * tag 'char-misc-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (30 commits) Revert "drivers/card_reader/rtsx_usb: Restore interrupt based detection" ntsync: Check wait count based on byte size. bus: simple-pm-bus: fix forced runtime PM use char: misc: deallocate static minor in error path eeprom: digsy_mtc: Make GPIO lookup table match the device drivers: virt: acrn: hsm: Use kzalloc to avoid info leak in pmcmd_ioctl binderfs: fix use-after-free in binder_devices slimbus: messaging: Free transaction ID in delayed interrupt scenario vbox: add HAS_IOPORT dependency cdx: Fix possible UAF error in driver_override_show() intel_th: pci: Add Panther Lake-P/U support intel_th: pci: Add Panther Lake-H support intel_th: pci: Add Arrow Lake support intel_th: msu: Fix less trivial kernel-doc warnings intel_th: msu: Fix kernel-doc warnings MAINTAINERS: change maintainer for FSI ntsync: Set the permissions to be 0666 bus: mhi: host: pci_generic: Use pci_try_reset_function() to avoid deadlock mei: vsc: Use "wakeuphostint" when getting the host wakeup GPIO mei: me: add panther lake P DID ...
2025-03-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "arm64: - Fix a couple of bugs affecting pKVM's PSCI relay implementation when running in the hVHE mode, resulting in the host being entered with the MMU in an unknown state, and EL2 being in the wrong mode x86: - Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow - Ensure DEBUGCTL is context switched on AMD to avoid running the guest with the host's value, which can lead to unexpected bus lock #DBs - Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly emulate BTF. KVM's lack of context switching has meant BTF has always been broken to some extent - Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest can enable DebugSwap without KVM's knowledge - Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO memory" phase without actually generating a write-protection fault - Fix a printf() goof in the SEV smoke test that causes build failures with -Werror - Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2 isn't supported by KVM" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Explicitly zero EAX and EBX when PERFMON_V2 isn't supported by KVM KVM: selftests: Fix printf() format goof in SEV smoke test KVM: selftests: Ensure all vCPUs hit -EFAULT during initial RO stage KVM: SVM: Don't rely on DebugSwap to restore host DR0..DR3 KVM: SVM: Save host DR masks on CPUs with DebugSwap KVM: arm64: Initialize SCTLR_EL1 in __kvm_hyp_init_cpu() KVM: arm64: Initialize HCR_EL2.E2H early KVM: x86: Snapshot the host's DEBUGCTL after disabling IRQs KVM: SVM: Manually context switch DEBUGCTL if LBR virtualization is disabled KVM: x86: Snapshot the host's DEBUGCTL in common x86 KVM: SVM: Suppress DEBUGCTL.BTF on AMD KVM: SVM: Drop DEBUGCTL[5:2] from guest's effective value KVM: selftests: Assert that STI blocking isn't set after event injection KVM: SVM: Set RFLAGS.IF=1 in C code, to get VMRUN out of the STI shadow
2025-03-09gpu: nova-core: add initial documentationDanilo Krummrich
Add the initial documentation of the Nova project. The initial project documentation consists out of a brief introduction of the project, as well as project guidelines both general and nova-core specific and a task list for nova-core specifically. The task list is divided into tasks for general Rust infrastructure required by the project, tasks regarding GSP enablement and firmware abstraction, general GPU driver tasks as well as tasks related to external API design and test infrastructure. Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250306222336.23482-6-dakr@kernel.org Signed-off-by: Danilo Krummrich <dakr@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-11 11:21:24 +0000