summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-05-17X25: Move interrupt flag to bitfieldandrew hendry
Moves the x25 interrupt flag from char into bitfield. Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17X25: Move qbit flag to bitfieldandrew hendry
Moves the X25 q bit flag from char into a bitfield to allow BKL cleanup. Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17bnx2x: avoid TX timeout when stopping deviceStanislaw Gruszka
When stop device call netif_carrier_off() just after disabling TX queue to avoid possibility of netdev watchdog warning and ->ndo_tx_timeout() invocation. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17bnx2: Use netif_carrier_off() to prevent timeout.Michael Chan
Based on original patch from Stanislaw Gruszka <sgruszka@redhat.com>. Using netif_carrier_off() is better than updating all the ->trans_start on all the tx queues. netif_carrier_off() needs to be called after bnx2_disable_int_sync() to guarantee no race conditions with the serdes timers that can modify the carrier state. If the chip or phy is reset, carrier will turn back on when we get the link interrupt. If there is no reset, we need to turn carrier back on in bnx2_netif_start(). Again, the phy_lock prevents race conditions with the serdes timers. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17bnx2: Update 5709 MIPS firmware and version to 2.0.15.Michael Chan
New firmware fixes a performance regression on small packets. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17bnx2: Fix register printouts during NETEV_WATCHDOG.Eddie Wai
Dump the correct MCP registers and add EMAC_RX_STATUS register during NETDEV_WATCHDOG for debugging. Signed-off-by: Eddie Wai <waie@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17qlcnic: mark device state failAmit Kumar Salecha
Device state need to be mark as FAILED, if fail to start firmware. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17qlcnic: remove unused registerAmit Kumar Salecha
Removing register defines which are not used by Qlgoic CNA device. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17qlcnic: fix internal loopback testSucheta Chakraborty
Reset/set DEV_UP bit during allocation and deallocation of resources. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17qlcnic: module param for firmware load optionAmit Kumar Salecha
By default fw is loaded from flash, user can change this priority using load_fw_file module param. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17qlcnic: fix rx bytes statisticsSucheta Chakraborty
Added lrobytes to it. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17qlcnic: change adapter name displaySucheta Chakraborty
Append mac address to adapter name. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17qlcnic: fix memory leaksAnirban Chakraborty
Fixes memory leak in error path when memory allocation for adapter data structures fails. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17netdev: bfin_mac: check for mii_bus platform dataSonic Zhang
If the platform data for the mii_bus is missing, gracefully error out rather than deference NULL pointers. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17netdev: bfin_mac: handle timeouts with the MDIO registers gracefullyMike Frysinger
Have the low level MDIO functions pass back up timeout information so we don't waste time polling them multiple times when there is a problem, and so we don't let higher layers think the device is available when it isn't. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17netdev: bfin_mac: use promiscuous flag for promiscuous modeSonic Zhang
Rather than using the Receive All Frames (RAF) bit to enable promiscuous mode, use the Promiscuous (PR) bit. This lowers overhead at runtime as we let the hardware process the packets that should actually be checked. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17netdev: bfin_mac: add support for wake-on-lan magic packetsMichael Hennerich
Note that WOL works only in PM Suspend Standby Mode (Sleep Mode). Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17netdev: bfin_mac: clear RXCKS if hardware generated checksum is not enabledSonic Zhang
Otherwise we might be get a setting mismatch from a previous module or bootloader and what the driver currently expects. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17netdev: bfin_mac: deduce Ethernet FCS from hardware IP payload checksumSonic Zhang
IP checksum is based on 16-bit one's complement algorithm, so to deduce a value from checksum is equal to add its complement. Unfortunately, the Blackfin on-chip MAC checksum logic only works when the IP packet has a header length of 20 bytes. This is true for most IPv4 packets, but not for IPv6 packets or IPv4 packets which use header options. So only use the hardware checksum when appropriate. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Jon Kowal <jon.kowal@dspecialists.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17netdev: bfin_mac: invalid data cache only once for each new rx skb bufferSonic Zhang
The skb buffer isn't actually used until we finish transferring and pass it up to higher layers, so only invalidate the range once before we start receiving actual data. This also avoids the problem with data invalidating on Blackfin systems -- there is no invalidate-only, just invalidate+flush. So when running in writeback mode, there is the small (but not uncommon) possibility of the flush overwriting valid DMA-ed data from the cache. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17netdev: bfin_mac: handler RX status errorsPeter Meerwald
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17netdev: bfin_mac: add support for IEEE 1588 PTPBarry Song
Newer on-chip MAC peripherals support IEEE 1588 PTP in the hardware, so extend the driver to support this functionality. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17net: No dst refcounting in ip_queue_xmit()Eric Dumazet
TCP outgoing packets can avoid two atomic ops, and dirtying of previously higly contended cache line using new refdst infrastructure. Note 1: loopback device excluded because of !IFF_XMIT_DST_RELEASE Note 2: UDP packets dsts are built before ip_queue_xmit(). Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17net: Use ip_route_input_noref() in input pathEric Dumazet
Use ip_route_input_noref() in ip fast path, to avoid two atomic ops per incoming packet. Note: loopback is excluded from this optimization in ip_rcv_finish() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17net: implements ip_route_input_noref()Eric Dumazet
ip_route_input() is the version returning a refcounted dst, while ip_route_input_noref() returns a non refcounted one. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17net: add a noref bit on skb dstEric Dumazet
Use low order bit of skb->_skb_dst to tell dst is not refcounted. Change _skb_dst to _skb_refdst to make sure all uses are catched. skb_dst() returns the dst, regardless of noref bit set or not, but with a lockdep check to make sure a noref dst is not given if current user is not rcu protected. New skb_dst_set_noref() helper to set an notrefcounted dst on a skb. (with lockdep check) skb_dst_drop() drops a reference only if skb dst was refcounted. skb_dst_force() helper is used to force a refcount on dst, when skb is queued and not anymore RCU protected. Use skb_dst_force() in __sk_add_backlog(), __dev_xmit_skb() if !IFF_XMIT_DST_RELEASE or skb enqueued on qdisc queue, in sock_queue_rcv_skb(), in __nf_queue(). Use skb_dst_force() in dev_requeue_skb(). Note: dst_use_noref() still dirties dst, we might transform it later to do one dirtying per jiffies. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17rps: avoid one atomic in enqueue_to_backlogEric Dumazet
If CONFIG_SMP=y, then we own a queue spinlock, we can avoid the atomic test_and_set_bit() from napi_schedule_prep(). We now have same number of atomic ops per netif_rx() calls than with pre-RPS kernel. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17drivers/net/usb/asix.c: Fix unaligned accessesNeil Jones
Using this driver can cause unaligned accesses in the IP layer This has been fixed by aligning the skb data correctly using the spare room left over by the 4 byte header inserted between packets by the device. Signed-off-by: Neil Jones <NeilJay@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17ibmveth: Add suspend/resume supportBrian King
Adds support for resuming from suspend for IBM virtual ethernet devices. We may have lost an interrupt over the suspend, so we just kick the interrupt handler to process anything that is outstanding. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17ipv6 addrlabel: permit deletion of labels assigned to removed devFlorian Westphal
as addrlabels with an interface index are left alone when the interface gets removed this results in addrlabels that can no longer be removed. Restrict validation of index to adding new addrlabels. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18Merge branch 'next' into for-linusJames Morris
2010-05-18KEYS: Return more accurate error codesDan Carpenter
We were using the wrong variable here so the error codes weren't being returned properly. The original code returns -ENOKEY. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2010-05-18stop_machine: Move local variable closer to the usage site in ↵Ingo Molnar
cpu_stop_cpu_callback() This addresses the following compiler warning: kernel/stop_machine.c: In function 'cpu_stop_cpu_callback': kernel/stop_machine.c:297: warning: unused variable 'work' Cc: Tejun Heo <tj@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <tip-3fc1f1e27a5b807791d72e5d992aa33b668a6626@git.kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-17x86, hweight: Use a 32-bit popcnt for __arch_hweight32()H. Peter Anvin
Use a 32-bit popcnt instruction for __arch_hweight32(), even on x86-64. Even though the input register will *usually* be zero-extended due to the standard operation of the hardware, it isn't necessarily so if the input value was the result of truncating a 64-bit operation. Note: the POPCNT32 variant used on x86-64 has a technically unnecessary REX prefix to make it five bytes long, the same as a CALL instruction, therefore avoiding an unnecessary NOP. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Borislav Petkov <borislav.petkov@amd.com> LKML-Reference: <alpine.LFD.2.00.1005171443060.4195@i5.linux-foundation.org>
2010-05-17perf tools: Add mode to build without newt supportArnaldo Carvalho de Melo
make NO_NEWT=1 Will avoid building the newt (tui) support. Suggested-by: Ingo Molnar <mingo@elte.hu> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-17cifs: fix noserverino handling when unix extensions are enabledJeff Layton
The uniqueid field sent by the server when unix extensions are enabled is currently used sometimes when it shouldn't be. The readdir codepath is correct, but most others are not. Fix it. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-05-17perf symbols: symbol inconsistency message should be done only at verbose=1Arnaldo Carvalho de Melo
That happened for an old perf.data file that had no fake MMAP events for the kernel modules, but even then it should warn once for each module, not one time for every symbol in every module not found. Reported-by: Ingo Molnar <mingo@elte.hu> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-17cifs: don't update uniqueid in cifs_fattr_to_inodeJeff Layton
We use this value to find an inode within the hash bucket, so we can't change this without re-hashing the inode. For now, treat this value as immutable. Eventually, we should probably use an inode number change on a path based operation to indicate that the lookup cache is invalid, but that's a bit more code to deal with. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-05-17cifs: always revalidate hardlinked inodes when using noserverinoJeff Layton
The old cifs_revalidate logic always revalidated hardlinked inodes. This hack allowed CIFS to pass some connectathon tests when server inode numbers aren't used (basic test7, in particular). Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-05-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: amiga - Floppy platform device conversion m68k: amiga - Sound platform device conversion m68k: amiga - Frame buffer platform device conversion m68k: amiga - Zorro host bridge platform device conversion m68k: amiga - Zorro bus modalias support platform: Make platform resource input parameters const m68k: invoke oom-killer from page fault serial167: Kill unused variables m68k: Implement generic_find_next_{zero_,}le_bit() m68k: hp300 - Checkpatch cleanup m68k: Remove trailing spaces in messages m68k: Simplify param.h by using <asm-generic/param.h> m68k: Remove BKL from rtc implementations
2010-05-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/joern/logfsLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/joern/logfs: logfs: handle powerfail on NAND flash logfs: handle errors from get_mtd_device() logfs: remove unused variable logfs: fix sync logfs: fix compile failure logfs: initialize li->li_refcount logfs: commit reservations under space pressure logfs: survive logfs_buf_recover read errors logfs: Close i_ino reuse race logfs: fix logfs_seek_hole() logfs: Return -EINVAL if filesystem image doesn't match LogFS: Fix typo in b6349ac8 logfs: testing the wrong variable
2010-05-17Merge branch 'bkl/core' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing * 'bkl/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing: ptrace: Cleanup useless header ptrace: kill BKL in ptrace syscall
2010-05-17perf tui: Add explicit -lslang optionArnaldo Carvalho de Melo
At least on rawhide using -lnewt is not enough if we use SLang routines directly, so add an explicit -lslang since we use SLang routines. Reported-by: Ingo Molnar <mingo@elte.hu> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-17m68k: amiga - Floppy platform device conversionGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-05-17m68k: amiga - Sound platform device conversionGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-05-17m68k: amiga - Frame buffer platform device conversionGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-05-17m68k: amiga - Zorro host bridge platform device conversionGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-05-17m68k: amiga - Zorro bus modalias supportGeert Uytterhoeven
Add Amiga Zorro bus modalias and uevent support Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-05-17platform: Make platform resource input parameters constGeert Uytterhoeven
Make the platform resource input parameters of platform_device_add_resources() and platform_device_register_simple() const, as the resources are copied and never modified. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-17m68k: invoke oom-killer from page faultNick Piggin
As explained in commit 1c0fe6e3bd, we want to call the architecture independent oom killer when getting an unexplained OOM from handle_mm_fault, rather than simply killing current. Cc: linux-m68k@lists.linux-m68k.org Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-arch@vger.kernel.org Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: David Rientjes <rientjes@google.com> [Geert] Kill 2 introduced compiler warnings Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>