summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-07-04Merge tag 'linux-can-fixes-for-5.19-20220704' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== can 2022-07-04 The 1st patch is by Oliver Hartkopp, targets the BCM CAN protocol and converts a costly synchronize_rcu() to call_rcu() to fix a performance regression. Srinivas Neeli's patch for the xilinx_can driver drops the brp limit down to 1, as only the pre-production silicon have an issue with a brp of 1. The next patch is by Duy Nguyen and fixes the data transmission on R-Car V3U SoCs in the rcar_canfd driver. Rhett Aultman's patch fixes a DMA memory leak in the gs_usb driver. Liang He's patch removes an extra of_node_get() in the grcan driver. The next 2 patches are by me, target the m_can driver and fix the timestamp handling used for peripheral devices like the tcan4x5x. Jimmy Assarsson contributes 3 patches for the kvaser_usb driver and fixes CAN clock and bit timing related issues. The remaining 5 patches target the mcp251xfd driver. Thomas Kopp contributes 2 patches to improve the workaround for broken CRC when reading the TBC register. 3 patches by me add a missing hrtimer_cancel() during the ndo_stop() callback, and fix the reading of the Device ID register. * tag 'linux-can-fixes-for-5.19-20220704' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix endianness conversion can: mcp251xfd: mcp251xfd_register_get_dev_id(): use correct length to read dev_id can: mcp251xfd: mcp251xfd_stop(): add missing hrtimer_cancel() can: mcp251xfd: mcp251xfd_regmap_crc_read(): update workaround broken CRC on TBC register can: mcp251xfd: mcp251xfd_regmap_crc_read(): improve workaround handling for mcp2517fd can: kvaser_usb: kvaser_usb_leaf: fix bittiming limits can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression can: kvaser_usb: replace run-time checks with struct kvaser_usb_driver_info can: m_can: m_can_{read_fifo,echo_tx_event}(): shift timestamp to full 32 bits can: m_can: m_can_chip_config(): actually enable internal timestamping can: grcan: grcan_probe(): remove extra of_node_get() can: gs_usb: gs_usb_open/close(): fix memory leak can: rcar_canfd: Fix data transmission failed on R-Car V3U Revert "can: xilinx_can: Limit CANFD brp to 2" can: bcm: use call_rcu() instead of costly synchronize_rcu() ==================== Link: https://lore.kernel.org/r/20220704122613.1551119-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-05Merge branches 'msm-next-lumag-core', 'msm-next-lumag-dpu', ↵Dmitry Baryshkov
'msm-next-lumag-dp', 'msm-next-lumag-dsi', 'msm-next-lumag-hdmi', 'msm-next-lumag-mdp5' and 'msm-next-lumag-mdp4' into msm-next-lumag Changes in this merge: Core: - client utilization via fdinfo support - fix fence rollover issue DPU: - constification of HW catalog - support for using encoder as CRC source - WB support on sc7180 - WB resolution fixes - enable DSPP support for sc7280 DP: - dropped custom bulk clock implementation - made dp_bridge_mode_valid() return MODE_CLOCK_HIGH where applicable - fix link retraining on resolution change MDP5: - MSM8953 perf data HDMI: - YAML'ification of schema - dropped obsolete GPIO support - misc cleanups Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-05drm/msm: Fix fence rollover issueRob Clark
And while we are at it, let's start the fence counter close to the rollover point so that if issues slip in, they are more obvious. Signed-off-by: Rob Clark <robdclark@chromium.org> Fixes: fde5de6cb461 ("drm/msm: move fence code to it's own file") Fixes: 5f3aee4ceb5b ("drm/msm: Handle fence rollover") Patchwork: https://patchwork.freedesktop.org/patch/489619/ Link: https://lore.kernel.org/r/20220615162435.3011793-1-robdclark@gmail.com [DB: fixed the conflict while applying the patch] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-05drm/msm: Use div64_ul instead of do_divWan Jiabing
Fix following coccicheck warning: drivers/gpu/drm/msm/msm_gpu_devfreq.c:72:1-7: WARNING: do_div() does a 64-by-32 division, please consider using div64_ul instead. Use div64_ul instead of do_div to avoid a possible truncation. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Patchwork: https://patchwork.freedesktop.org/patch/483499/ Link: https://lore.kernel.org/r/20220426132126.686447-1-wanjiabing@vivo.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-05drm/msm: Expose client engine utilization via fdinfoRob Clark
Similar to AMD commit 874442541133 ("drm/amdgpu: Add show_fdinfo() interface"), using the infrastructure added in previous patches, we add basic client info and GPU engine utilisation for msm. Example output: # cat /proc/`pgrep glmark2`/fdinfo/6 pos: 0 flags: 02400002 mnt_id: 21 ino: 162 drm-driver: msm drm-client-id: 7 drm-engine-gpu: 1734371319 ns drm-cycles-gpu: 1153645024 drm-maxfreq-gpu: 800000000 Hz See also: https://patchwork.freedesktop.org/patch/468505/ v2: Add dev-maxfreq-$engine and update drm-usage-stats.rst v3: spelling and compiler warning Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Patchwork: https://patchwork.freedesktop.org/patch/488906/ Link: https://lore.kernel.org/r/20220609174213.2265938-2-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-05drm: Add DRM_GEM_FOPSRob Clark
The DEFINE_DRM_GEM_FOPS() helper is a bit limiting if a driver wants to provide additional file ops, like show_fdinfo(). v2: Split out DRM_GEM_FOPS instead of making DEFINE_DRM_GEM_FOPS varardic v3: nits Signed-off-by: Rob Clark <robdclark@chromium.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Patchwork: https://patchwork.freedesktop.org/patch/488904/ Link: https://lore.kernel.org/r/20220609174213.2265938-1-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-05drm/msm: Make msm_gem_free_object() staticRob Clark
Misc small cleanup I noticed. Not called from another object file since commit 3c9edd9c85f5 ("drm/msm: Introduce GEM object funcs") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489362/ Link: https://lore.kernel.org/r/20220613204910.2651747-1-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm: bridge: sii8620: fix possible off-by-oneHangyu Hua
The next call to sii8620_burst_get_tx_buf will result in off-by-one When ctx->burst.tx_count + size == ARRAY_SIZE(ctx->burst.tx_buf). The same thing happens in sii8620_burst_get_rx_buf. This patch also change tx_count and tx_buf to rx_count and rx_buf in sii8620_burst_get_rx_buf. It is unreasonable to check tx_buf's size and use rx_buf. Fixes: e19e9c692f81 ("drm/bridge/sii8620: add support for burst eMSC transmissions") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220518065856.18936-1-hbh25y@gmail.com
2022-07-04drm/msm/disp/dpu1: add dspp support for sc7280Kalyan Thota
Add destination side post processing hw block support in sc7280. This hwblock enablement is necessary to support color features like CT Matix (Ex: Night Light feature) Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/490382/ Link: https://lore.kernel.org/r/1655802387-15275-1-git-send-email-quic_kalyant@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/mdp5: Add perf data for MDP v1.16Vladimir Lypak
Add the perf data for the mdp found in msm8953. Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489153/ Link: https://lore.kernel.org/r/20220610225304.267508-1-luca@z3ntu.xyz Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/mdp4: get rid of struct mdp4_platform_configDmitry Baryshkov
Struct mdp4_platform_config is a relict from the DT-conversion time. Move the max_clk field to the mdp4_kms_init(), the place where it is used and drop the struct mdp4_platform_config and the mdp4_get_config() function. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/485050/ Link: https://lore.kernel.org/r/20220505135008.1351533-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/mdp4: move iommu_domain_alloc() call close to its usageDmitry Baryshkov
Move iommu_domain_alloc() in front of adress space/IOMMU initialization. This allows us to drop it from struct mdp4_cfg_platform which remained from the pre-DT days. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/485049/ Link: https://lore.kernel.org/r/20220505135008.1351533-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: support attaching the "next" bridgeDmitry Baryshkov
There might be a chain of bridges attached to the HDMI node (including but not limited to the display-connector bridge). Add support for attaching them right to the HDMI bridge chain. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/489709/ Link: https://lore.kernel.org/r/20220616085057.432353-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: drop empty bridge callbacksDmitry Baryshkov
Drop empty callbacks msm_hdmi_bridge_enable() and msm_hdmi_bridge_disable(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/489707/ Link: https://lore.kernel.org/r/20220616085054.432317-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi-phy: populate 8x60 HDMI PHY requirementsDmitry Baryshkov
Declare that 8x60 HDMI PHY uses the core-vdda regulator and slave_iface clock (this is the same config as is used by the 8960). Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488863/ Link: https://lore.kernel.org/r/20220609122350.3157529-13-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: reuse MSM8960's config for MSM8660Dmitry Baryshkov
MSM8660 requires the same set of clocks and regulators as MSM8960. Reuse MSM8960's config for the MSM8660 (8x60). Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488864/ Link: https://lore.kernel.org/r/20220609122350.3157529-12-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: merge platform config for 8974/8084/8994/8996Dmitry Baryshkov
Since there is no more difference between the HDMI platform data between MSM8974/APQ8084/MSM8994/MSM8996, merge these configs into a single entry. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488868/ Link: https://lore.kernel.org/r/20220609122350.3157529-11-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: drop hpd_regs usage on 8x74/8084Dmitry Baryshkov
The MSM HDMI driver has support for hpd_regs on 8x74/8084: supply regulators that are to be enabled for HPD to work. Currently these regulators contain the hpd_gdsc, which was replaced by the power-domains support and hpd-5v/hpd-5v-en, which are not used by the chip itself. They power up the ESD bridge. However it is a separate device which should be represented separately in the device tree. None of upstreamed devices support these properties. Thus drop support for them from the HDMI driver. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488860/ Link: https://lore.kernel.org/r/20220609122350.3157529-10-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: drop empty 'none' regulator listsDmitry Baryshkov
Several platform configs use empty 'none' regulator arrays. They are not necessary, as the code will use corresponding _cnt field and skip the array completely. Drop them now. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488861/ Link: https://lore.kernel.org/r/20220609122350.3157529-9-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: enable core-vcc/core-vdda-supply for 8996 platformDmitry Baryshkov
DB820c makes use of core-vcc-supply and core-vdda-supply, however the driver code doesn't support these regulators. Enable them for HDMI on 8996 platform. Fixes: 0afbe59edd3f ("drm/msm/hdmi: Add basic HDMI support for msm8996") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/488857/ Link: https://lore.kernel.org/r/20220609122350.3157529-8-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: drop unused GPIO supportDmitry Baryshkov
The HDMI driver has code to configure extra GPIOs, which predates pinctrl support. Nowadays all platforms should use pinctrl instead. Neither of upstreamed Qualcomm platforms uses these properties, so it's safe to drop them. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/488858/ Link: https://lore.kernel.org/r/20220609122350.3157529-7-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: drop the hdmi-mux supportDmitry Baryshkov
With the last (and only) in-kernel user of hdmi-mux regulator, drop it from the HDMI driver. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488855/ Link: https://lore.kernel.org/r/20220609122350.3157529-6-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04dt-bindings: display/msm: hdmi: mark hdmi-mux-supply as deprecatedDmitry Baryshkov
hdmi-mux-supply is not used by the SoC's HDMI block, it is thought to power up the external logic. Thus it should not be a part of HDMI bindings, but it should be declared at some other device in the DT (like HDMI mux, bridge, etc). Mark it as deprecated. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488870/ Link: https://lore.kernel.org/r/20220609122350.3157529-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04dt-bindings: display/msm: hdmi: mark old GPIO properties as deprecatedDmitry Baryshkov
Mark obsolete GPIO properties as deprecated. They are not used by existing device trees. While we are at it, also drop them from the schema example. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488852/ Link: https://lore.kernel.org/r/20220609122350.3157529-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04dt-bindings: display/msm: hdmi: split and convert to yamlDmitry Baryshkov
Convert Qualcomm HDMI binding into HDMI TX and PHY yaml bindings. Changes to schema: HDMI: - fixed reg-names numbering to match 0..3 instead 0,1,3,4 - dropped qcom,tx-ddc-* from example, they were not documented - make phy-names deprecated, drop it from the examples PHY: - moved into phy/ directory - split into QMP and non-QMP PHY schemas Co-developed-by: David Heidelberg <david@ixit.cz> Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488850/ Link: https://lore.kernel.org/r/20220609122350.3157529-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: use ARRAY_SIZE for calculating num_descsDmitry Baryshkov
If for some reason the msm_dp_config::descs array starts from non-zero index or contains the hole, setting the msm_dp_config::num_descs might be not that obvious and error-prone. Use ARRAY_SIZE to set this field rather than encoding the value manually. Reported-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/491399/ Link: https://lore.kernel.org/r/20220627165413.657142-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dsi: Use single function for resetVladimir Lypak
There is currently two function for performing reset: dsi_sw_reset and dsi_sw_reset_restore. Only difference between those is that latter one assumes that DSI controller is enabled. In contrary former one assumes that controller is disabled and executed during power-on. However this assumtion is not true mobile devices which have boot splash set up by boot-loader. This patch removes dsi_sw_reset_restore and makes dsi_sw_reset disable DSI controller during reset sequence if it's enabled. Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489152/ Link: https://lore.kernel.org/r/20220610220259.220622-1-luca@z3ntu.xyz [DB: fixed the typo in the commit message] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: fill the pwr_regs bulk regulatorsDmitry Baryshkov
Conversion to use bulk regulator API omitted filling the pwr_regs with proper regulator IDs. This was left unnoticed, since none of my testing platforms has used the pwr_regs. Fix this by propagating regulator ids properly. Fixes: 31b3b1f5e352 ("drm/msm/hdmi: use bulk regulator API") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/488847/ Link: https://lore.kernel.org/r/20220609113148.3149194-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: Remove encoder pointer from struct msm_dpStephen Boyd
We don't need to stash the encoder here. Instead we can simply pass it around as an argument. Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/491187/ Link: https://lore.kernel.org/r/20220625002811.3225344-1-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: make dp_bridge_mode_valid() more preciseDmitry Baryshkov
Make dp_connector_mode_valid() return precise MODE_CLOCK_HIGH rather than generic MODE_BAD in case the mode clock is higher than DP_MAX_PIXEL_CLK_KHZ (675 MHz). Reviewed-by: Kuogee Hsieh<quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489554/ Link: https://lore.kernel.org/r/20220615115920.6768-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04dt-bindings: msm: update maintainers list with proper idKuogee Hsieh
Use quic id instead of codeaurora id in maintainers list for display devicetree bindings. Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488296/ Link: https://lore.kernel.org/r/1654286979-11072-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: simplify and unify dpu_encoder_get_intf and dpu_encoder_get_wbDmitry Baryshkov
Remove extra nestting level from the dpu_encoder_get_intf(), replacing it with the explicit return in case the INTF_WB was passed to the function. While we are at it, also change dpu_encoder_get_wb() to also use explicit return rather than the goto. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/491189/ Link: https://lore.kernel.org/r/20220625003028.383259-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04dt-bindings: msm/dp: List supplies in the bindingsDouglas Anderson
We're supposed to list the supplies in the dt bindings but there are none in the DP controller bindings. Looking at the Linux driver and existing device trees, we can see that two supplies are expected: - vdda-0p9-supply - vdda-1p2-supply Let's list them both in the bindings. Note that the datasheet for sc7280 doesn't describe these supplies very verbosely. For the 0p9 supply, for instance, it says "Power for eDP 0.9 V circuits". This this is obvious from the property name, we don't bother cluttering the bindings with a description. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/483373/ Link: https://lore.kernel.org/r/20220425140619.1.Ibfde5a26a7182c4b478d570c23d2649823ac2cce@changeid Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: Add interface support for CRC debugfsJessica Zhang
Add support for writing CRC values for the interface block to the debugfs by calling the necessary MISR setup/collect methods. Changes since V1: - Set values_cnt to only include phys with backing hw_intf - Loop over all drm_encs connected to crtc Changes since V2: - Remove vblank.h inclusion - Change `pos + i` to `pos + entries` - Initialize values_cnt to 0 for encoder - Change DPU_CRTC_CRC_SOURCE_INTF to DPU_CRTC_CRC_SOURCE_ENCODER (and "intf" to "enc") - Change dpu_encoder_get_num_phys to dpu_encoder_get_num_hw_intfs - Add checks for setup_misr and collect_misr in dpu_encoder_get_num_hw_intfs Changes since V3: - Remove extra whitespace - Change "enc" to "encoder" - Move crcs array to dpu_crtc_get_encoder_crc - Rename dpu_encoder_get_num_hw_intfs to dpu_encoder_get_crc_values_cnt Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/490736/ Link: https://lore.kernel.org/r/20220622171835.7558-5-quic_jesszhan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: rewrite dss_module_power to use bulk clock functionsDmitry Baryshkov
In order to simplify DP code, drop hand-coded loops over clock arrays, replacing them with clk_bulk_* functions. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/474717/ Link: https://lore.kernel.org/r/20220217055529.499829-6-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: Add MISR register support for interfaceJessica Zhang
Add support for setting MISR registers within the interface Changes since V1: - Replaced dpu_hw_intf collect_misr and setup_misr implementations with calls to dpu_hw_utils helper methods Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/490730/ Link: https://lore.kernel.org/r/20220622171835.7558-4-quic_jesszhan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: inline dp_power_clk_set_rate()Dmitry Baryshkov
Inline the dp_power_clk_set_rate() function, replacing it with the call to msm_dss_enable_clk(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/474719/ Link: https://lore.kernel.org/r/20220217055529.499829-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: Move MISR methods to dpu_hw_utilJessica Zhang
Move layer mixer specific MISR methods to generalized helper methods. This will make it easier to add CRC support for other blocks in the future. Changes since V2: - Reordered parameters so that offsets are after hw_blk_reg_map - Fixed mismatched whitespace in bitmask definitions Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/490732/ Link: https://lore.kernel.org/r/20220622171835.7558-3-quic_jesszhan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: set stream_pixel rate directlyDmitry Baryshkov
The only clock for which we set the rate is the "stream_pixel". Rather than storing the rate and then setting it by looping over all the clocks, set the clock rate directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/474714/ Link: https://lore.kernel.org/r/20220217055529.499829-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: "inline" dp_ctrl_set_clock_rate("ctrl_link")Dmitry Baryshkov
"ctrl_link" is the clock from DP_CTRL_PM module. The result of setting the rate for it would be a call to dev_pm_opp_set_rate(). Instead of saving the rate inside struct dss_module_power, call the devm_pm_opp_set_rate() directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/474712/ Link: https://lore.kernel.org/r/20220217055529.499829-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: Move LM CRC code into separate methodJessica Zhang
Move layer mixer-specific section of dpu_crtc_get_crc() into a separate helper method. This way, we can make it easier to get CRCs from other HW blocks by adding other get_crc helper methods. Changes since V1: - Move common bitmasks to dpu_hw_util.h - Move common CRC methods to dpu_hw_util.c - Update copyrights - Change crcs array to a dynamically allocated array and added it as a member of crtc_state Changes since V2: - Put changes for hw_util into a separate commit - Revert crcs array to a static array - Add else case for set_crc_source to return EINVAL if no valid source is selected - Add DPU_CRTC_MAX_CRC_ENTRIES macro Changes since V3: - Move crcs array into dpu_crtc_get_lm_crc - Remove comment about crcs array in dpu_crtc_state struct - Revert `lm` rename - Remove DPU_CRTC_MAX_CRC_ENTRIES macro - Return EINVAL in dpu_crtc_get_crc if no valid CRC source is set Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/490735/ Link: https://lore.kernel.org/r/20220622171835.7558-2-quic_jesszhan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: remove hard-coded linewidth limit for writebackAbhinav Kumar
Remove the hard-coded limit for writeback and lets start using the one from catalog instead. changes in v3: - correct the Fixes tag Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback") Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489888/ Link: https://lore.kernel.org/r/1655406084-17407-3-git-send-email-quic_abhinavk@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: fix maxlinewidth for writeback blockAbhinav Kumar
Writeback block for sm8250 was using the default maxlinewidth of 2048. But this is not right as it supports upto 4096. This should have no effect on most resolutions as we are still limiting upto maxlinewidth of SSPP for adding the modes. Fix the maxlinewidth for writeback block on sm8250. changes in v3: - correct the Fixes tag Fixes: 53324b99bd7b ("drm/msm/dpu: add writeback blocks to the sm8250 DPU catalog") Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489887/ Link: https://lore.kernel.org/r/1655406084-17407-2-git-send-email-quic_abhinavk@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: move intf and wb assignment to dpu_encoder_setup_display()Abhinav Kumar
intf and wb resources are not dependent on the rm global state so need not be allocated during dpu_encoder_virt_atomic_mode_set(). Move the allocation of intf and wb resources to dpu_encoder_setup_display() so that we can utilize the hw caps even during atomic_check() phase. Since dpu_encoder_setup_display() already has protection against setting invalid intf_idx and wb_idx, these checks can now be dropped as well. changes in v2: - add phys->hw_intf and phys->hw_wb checks back changes in v3: - correct the Fixes tag Fixes: e02a559a720f ("drm/msm/dpu: make changes to dpu_encoder to support virtual encoder") Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489885/ Link: https://lore.kernel.org/r/1655406084-17407-1-git-send-email-quic_abhinavk@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: drop enum msm_display_capsDmitry Baryshkov
After the commit c46f0d69039c ("drm/msm: remove unused hotplug and edid macros from msm_drv.h") the msm_display_caps enum contains two bits describing whether the encoder should work in video or command mode. Drop the enum and replace capabilities field in struct msm_display_info with boolean is_cmd_mode field. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/485454/ Link: https://lore.kernel.org/r/20220507115942.1705872-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: dont_use IS_ERR_OR_NULL for encoder phys backendsDmitry Baryshkov
The functions dpu_encoder_phys_foo_init() can not return NULL. Replace corresponding IS_ERR_OR_NULL() checks with just IS_ERR(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/485452/ Link: https://lore.kernel.org/r/20220507115942.1705872-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: make dpu hardware catalog static constDmitry Baryshkov
Replace superfluous cfg_init functions, which just assign a static config to the struct dpu_mdss_cfg, with static instances of struct dpu_mdss_cfg. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/488166/ Link: https://lore.kernel.org/r/20220602202447.1755115-8-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: constify struct dpu_mdss_cfgDmitry Baryshkov
Mark struct dpu_mdss_cfg instance as a const pointer. This is mostly a preparation for the next patch. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488164/ Link: https://lore.kernel.org/r/20220602202447.1755115-7-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: change catalog->dma_cfg to be a const pointerDmitry Baryshkov
Change dpu_mdss_cfg::dma_cfg to be a const pointer rather than embedding the dpu_reg_dma_cfg struct into the struct dpu_mdss_cfg. Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488162/ Link: https://lore.kernel.org/r/20220602202447.1755115-6-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: change catalog->perf to be a const pointerDmitry Baryshkov
Change dpu_mdss_cfg::perf to be a const pointer rather than embedding the dpu_perf_cfg struct into the struct dpu_mdss_cfg. Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488158/ Link: https://lore.kernel.org/r/20220602202447.1755115-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-22 00:57:18 +0000