| Age | Commit message (Collapse) | Author |
|---|
|
There is nothing to prevent the CPU or the compiler from reordering
the writes to stats->reset_time and stats->reset_pending in
store_reset(), in which case the readers of stats->reset_time may see
a stale value. Moreover, on 32-bit arches the write to reset_time
cannot be completed in one go, so the readers of it may see a
partially updated value in that case.
To prevent that from happening, add a write memory barrier between
the writes to stats->reset_time and stats->reset_pending in
store_reset() and corresponding read memory barrier in the
readers of stats->reset_time.
Fixes: 40c3bd4cfa6f ("cpufreq: stats: Defer stats update to cpufreq_stats_record_transition()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Drop a redundant local variable definition from sugov_fast_switch()
and rearrange the code in there to avoid the redundant logical
negation.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Pull NVMe fix from Christoph:
"nvme fix for 5.9:
- fix a recently introduced controller leak (Logan Gunthorpe)"
* tag 'nvme-5.9-2020-10-07' of git://git.infradead.org/nvme:
nvme-core: put ctrl ref when module ref get fail
|
|
Martin rightfully noted that for normal filesystem IO we have soft limits
in place, to prevent them from getting too big and not lead to
unpredictable latencies. For zone append we only have the hardware limit
in place.
Cap the max sectors we submit via zone-append to the maximal number of
sectors if the second limit is lower.
Reported-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/linux-btrfs/yq1k0w8g3rw.fsf@ca-mkp.ca.oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
HP Spectre notebooks (and probably other model as well)
support up to 4 thermal policy:
- HP Recommended
- Performance
- Cool
- Quiet
at least on HP Spectre x360 Convertible 15-df0xxx the firmware sets the
thermal policy to default but hardcode the odvp0 variable to 1, this causes
thermald to choose the wrong DPTF profile witch result in low performance
when notebook is on AC, calling thermal policy write command allow firmware
to correctly set the odvp0 variable.
Signed-off-by: Elia Devito <eliadevito@gmail.com>
Link: https://lore.kernel.org/r/20201004211305.11628-1-eliadevito@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Don't error out if the dasd_biodasdinfo symbol is not available.
Cc: stable@vger.kernel.org
Fixes: 26d7e28e3820 ("s390/dasd: remove ioctl_by_bdev calls")
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
pr_*() printing helpers are preferred over using bare printk().
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The copyright notice alarms checkpatch.pl of usin spaces before tabs.
Fix this.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Move local variables of the same type into a single line for better
readability.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The structure containing the storeme field is allocated using kzalloc().
There's no need to set it to 0 again.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
simple_strtoul() is deprecated. Use kstrtoint().
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Aling the assignment of a static structure's field to be consistent with
all other instances.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Checking pointers for NULL value before passing them to container_of()
is pointless because even if we return NULL from the ternary operator,
none of the users checks the returned value but they instead dereference
it unconditionally. AFAICT this cannot really happen either. Simplify
the code by removing the ternary operators from to_childless() et al.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
There's no need for suplemental newlines in the source file - especially
since the examples are well divided with comments already.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Code samples for configfs don't have an explicit maintainer. Add the
samples directory to the existing configfs entry in MAINTAINERS.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Some of the pins were not exposed in the initial driver or kept as
reserved. Exposing all of them now.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20201007111220.744348-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Late patches for 5.10: MTE selftests, minor KCSAN preparation and removal
of some unused prototypes.
(Amit Daniel Kachhap and others)
* for-next/late-arrivals:
arm64: random: Remove no longer needed prototypes
arm64: initialize per-cpu offsets earlier
kselftest/arm64: Check mte tagged user address in kernel
kselftest/arm64: Verify KSM page merge for MTE pages
kselftest/arm64: Verify all different mmap MTE options
kselftest/arm64: Check forked child mte memory accessibility
kselftest/arm64: Verify mte tag inclusion via prctl
kselftest/arm64: Add utilities and a test to validate mte memory
|
|
Commit 9bceb80b3cc4 ("arm64: kaslr: Use standard early random
function") removed the direct calls of the __arm64_rndr() and
__early_cpu_has_rndr() functions, but left the dummy prototypes in the
#else branch of the #ifdef CONFIG_ARCH_RANDOM guard.
Remove the redundant prototypes, as they have no users outside of
this header file.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20201006194453.36519-1-andre.przywara@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
There is a spelling mistake in a dev_warn message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20201006152024.542418-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The device can be connected on SPI or on SDIO. The original file
described the two options separately. So, most of the file had to be
rewritten in order to match with the Yaml requirements.
Some device requirements are still written in the comments since they
cannot been expressed with the current scheme (e.g. reg must be set to 1
with SDIO, interrupt is mandatory with SPI, reset-gpio in SPI is
replaced by mmc-pwrseq in SDIO, etc...).
The examples provided have also been reworked in order to make
dt_binding_check happy.
Finally, also fix typo in the name of the file (siliabs instead of
silabs)
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20201007101943.749898-7-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Most of the files have been modified in 2020, so update the copyright
notices.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20201007101943.749898-6-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The device is in charge of respecting the QoS constraints. The driver
have to ensure that all the queues contain data and the device choose
the right queue to send.
The things starts to be more difficult when the bandwidth of the bus is
lower than the bandwidth of the WiFi. The device quickly sends the
frames of the highest priority queue. Then, it starts to send frames
from a lower priority queue. Though, there are still some high priority
frames waiting in the driver.
To work around this problem, this patch add some priorities to each
queue. The weigh of the queue was (roughly) calculated experimentally by
checking the speed ratio of each queue when the bus does not limit the
traffic:
- Be/Bk -> 20Mbps/10Mbps
- Vi/Be -> 36Mbps/180Kbps
- Vo/Be -> 35Mbps/600Kbps
- Vi/Vo -> 24Mbps/12Mbps
So, if we fix the weigh of the Background to 1, the weight of Best
Effort should be 2. The weight of Video should be 116. However, since
there is only 32 queues, it make no sense to use a value greater than
64[1]. And finally, the weight of the Voice is set to 128.
[1] Because of this approximation, with very slow bus, we can still
observe frame starvation when we measure the speed ratio of Vi/Be. It is
around 35Mbps/1Mbps (instead of 36Mbps/180Kbps). However, it is still in
accepted error range.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20201007101943.749898-5-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Firmwares with API < 3.6 do not forward DELBA requests. Thus, when a
Block Ack session is restarted, the reordering buffer is not flushed and
the received sequence number is not contiguous. Therefore, mac80211
starts to wait some missing frames that it will never receive.
This patch disables the reordering buffer for old firmware. It is
harmless when the network is unencrypted. When the network is encrypted,
the non-contiguous frames will be thrown away by the TKIP/CCMP replay
protection. So, the user will observe some packet loss with UDP and
performance drop with TCP.
Fixes: e5da5fbd7741 ("staging: wfx: fix CCMP/TKIP replay protection")
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20201007101943.749898-4-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit e8d607ce0c81 ("staging: wfx: drop 'secure link' feature") had
removed the 'secure link' feature. However, a few lines of codes were
yet here.
Fixes: e8d607ce0c81 ("staging: wfx: drop 'secure link' feature")
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20201007101943.749898-3-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As expected, when the device detect a MMIC error, it returns a specific
status. However, it also strip IV from the frame (don't ask me why).
So, with the current code, mac80211 detects a corrupted frame and it
drops it before it handle the MMIC error. The expected behavior would be
to detect MMIC error then to renegotiate the EAP session.
So, this patch correctly informs mac80211 that IV is not available. So,
mac80211 correctly takes into account the MMIC error.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20201007101943.749898-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 8d875f95da43 ("btrfs: disable strict file flushes for
renames and truncates") eliminated the notion of ordered operations and
instead BTRFS_INODE_ORDERED_DATA_CLOSE only remained as a flag
indicating that a file's content should be synced to disk in case a
file is truncated and any writes happen to it concurrently. In fact
this intendend behavior was broken until it was fixed in
f6dc45c7a93a ("Btrfs: fix filemap_flush call in btrfs_file_release").
All things considered let's give the flag a more descriptive name. Also
slightly reword comments.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This patch fixes the following sparse errors in
fs/btrfs/super.c in function btrfs_show_devname()
fs/btrfs/super.c: error: incompatible types in comparison expression (different address spaces):
fs/btrfs/super.c: struct rcu_string [noderef] <asn:4> *
fs/btrfs/super.c: struct rcu_string *
The error was because of the following line in function btrfs_show_devname():
if (first_dev)
seq_escape(m, rcu_str_deref(first_dev->name), " \t\n\\");
Annotating the btrfs_device::name member with __rcu fixes the sparse
error.
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik04@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Many things can happen after the device is scanned and before the device
is mounted. One such thing is losing the BTRFS_MAGIC on the device.
If it happens we still won't free that device from the memory and cause
the userland confusion.
For example: As the BTRFS_IOC_DEV_INFO still carries the device path
which does not have the BTRFS_MAGIC, 'btrfs fi show' still lists
device which does not belong to the filesystem anymore:
$ mkfs.btrfs -fq -draid1 -mraid1 /dev/sda /dev/sdb
$ wipefs -a /dev/sdb
# /dev/sdb does not contain magic signature
$ mount -o degraded /dev/sda /btrfs
$ btrfs fi show -m
Label: none uuid: 470ec6fb-646b-4464-b3cb-df1b26c527bd
Total devices 2 FS bytes used 128.00KiB
devid 1 size 3.00GiB used 571.19MiB path /dev/sda
devid 2 size 3.00GiB used 571.19MiB path /dev/sdb
We need to distinguish the missing signature and invalid superblock, so
add a specific error code ENODATA for that. This also fixes failure of
fstest btrfs/198.
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In fstest btrfs/064 a transaction abort in __btrfs_cow_block could lead
to a system lockup. It gets stuck trying to write back inodes, and the
write back thread was trying to lock an extent buffer:
$ cat /proc/2143497/stack
[<0>] __btrfs_tree_lock+0x108/0x250
[<0>] lock_extent_buffer_for_io+0x35e/0x3a0
[<0>] btree_write_cache_pages+0x15a/0x3b0
[<0>] do_writepages+0x28/0xb0
[<0>] __writeback_single_inode+0x54/0x5c0
[<0>] writeback_sb_inodes+0x1e8/0x510
[<0>] wb_writeback+0xcc/0x440
[<0>] wb_workfn+0xd7/0x650
[<0>] process_one_work+0x236/0x560
[<0>] worker_thread+0x55/0x3c0
[<0>] kthread+0x13a/0x150
[<0>] ret_from_fork+0x1f/0x30
This is because we got an error while COWing a block, specifically here
if (test_bit(BTRFS_ROOT_SHAREABLE, &root->state)) {
ret = btrfs_reloc_cow_block(trans, root, buf, cow);
if (ret) {
btrfs_abort_transaction(trans, ret);
return ret;
}
}
[16402.241552] BTRFS: Transaction aborted (error -2)
[16402.242362] WARNING: CPU: 1 PID: 2563188 at fs/btrfs/ctree.c:1074 __btrfs_cow_block+0x376/0x540
[16402.249469] CPU: 1 PID: 2563188 Comm: fsstress Not tainted 5.9.0-rc6+ #8
[16402.249936] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
[16402.250525] RIP: 0010:__btrfs_cow_block+0x376/0x540
[16402.252417] RSP: 0018:ffff9cca40e578b0 EFLAGS: 00010282
[16402.252787] RAX: 0000000000000025 RBX: 0000000000000002 RCX: ffff9132bbd19388
[16402.253278] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9132bbd19380
[16402.254063] RBP: ffff9132b41a49c0 R08: 0000000000000000 R09: 0000000000000000
[16402.254887] R10: 0000000000000000 R11: ffff91324758b080 R12: ffff91326ef17ce0
[16402.255694] R13: ffff91325fc0f000 R14: ffff91326ef176b0 R15: ffff9132815e2000
[16402.256321] FS: 00007f542c6d7b80(0000) GS:ffff9132bbd00000(0000) knlGS:0000000000000000
[16402.256973] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[16402.257374] CR2: 00007f127b83f250 CR3: 0000000133480002 CR4: 0000000000370ee0
[16402.257867] Call Trace:
[16402.258072] btrfs_cow_block+0x109/0x230
[16402.258356] btrfs_search_slot+0x530/0x9d0
[16402.258655] btrfs_lookup_file_extent+0x37/0x40
[16402.259155] __btrfs_drop_extents+0x13c/0xd60
[16402.259628] ? btrfs_block_rsv_migrate+0x4f/0xb0
[16402.259949] btrfs_replace_file_extents+0x190/0x820
[16402.260873] btrfs_clone+0x9ae/0xc00
[16402.261139] btrfs_extent_same_range+0x66/0x90
[16402.261771] btrfs_remap_file_range+0x353/0x3b1
[16402.262333] vfs_dedupe_file_range_one.part.0+0xd5/0x140
[16402.262821] vfs_dedupe_file_range+0x189/0x220
[16402.263150] do_vfs_ioctl+0x552/0x700
[16402.263662] __x64_sys_ioctl+0x62/0xb0
[16402.264023] do_syscall_64+0x33/0x40
[16402.264364] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[16402.264862] RIP: 0033:0x7f542c7d15cb
[16402.266901] RSP: 002b:00007ffd35944ea8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[16402.267627] RAX: ffffffffffffffda RBX: 00000000009d1968 RCX: 00007f542c7d15cb
[16402.268298] RDX: 00000000009d2490 RSI: 00000000c0189436 RDI: 0000000000000003
[16402.268958] RBP: 00000000009d2520 R08: 0000000000000036 R09: 00000000009d2e64
[16402.269726] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002
[16402.270659] R13: 000000000001f000 R14: 00000000009d1970 R15: 00000000009d2e80
[16402.271498] irq event stamp: 0
[16402.271846] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[16402.272497] hardirqs last disabled at (0): [<ffffffff910dbf59>] copy_process+0x6b9/0x1ba0
[16402.273343] softirqs last enabled at (0): [<ffffffff910dbf59>] copy_process+0x6b9/0x1ba0
[16402.273905] softirqs last disabled at (0): [<0000000000000000>] 0x0
[16402.274338] ---[ end trace 737874a5a41a8236 ]---
[16402.274669] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry
[16402.276179] BTRFS info (device dm-9): forced readonly
[16402.277046] BTRFS: error (device dm-9) in btrfs_replace_file_extents:2723: errno=-2 No such entry
[16402.278744] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry
[16402.279968] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry
[16402.280582] BTRFS info (device dm-9): balance: ended with status: -30
The problem here is that as soon as we allocate the new block it is
locked and marked dirty in the btree inode. This means that we could
attempt to writeback this block and need to lock the extent buffer.
However we're not unlocking it here and thus we deadlock.
Fix this by unlocking the cow block if we have any errors inside of
__btrfs_cow_block, and also free it so we do not leak it.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since we now perform direct reads using i_rwsem, we can remove this
inode flag used to co-ordinate unlocked reads.
The truncate call takes i_rwsem. This means it is correctly synchronized
with concurrent direct reads.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since we removed the last user of dio_end_io() when btrfs got converted
to iomap infrastructure ("btrfs: switch to iomap for direct IO"), remove
the helper function dio_end_io().
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
I noticed when fixing device stats for seed devices that we simply threw
away the return value from btrfs_search_slot(). This is because we may
not have stat items, but we could very well get an error, and thus miss
reporting the error up the chain.
Fix this by returning ret if it's an actual error, and then stop trying
to init the rest of the devices stats and return the error up the chain.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We recently started recording device stats across the fleet, and noticed
a large increase in messages such as this
BTRFS warning (device dm-0): get dev_stats failed, not yet valid
on our tiers that use seed devices for their root devices. This is
because we do not initialize the device stats for any seed devices if we
have a sprout device and mount using that sprout device. The basic
steps for reproducing are:
$ mkfs seed device
$ mount seed device
# fill seed device
$ umount seed device
$ btrfstune -S 1 seed device
$ mount seed device
$ btrfs device add -f sprout device /mnt/wherever
$ umount /mnt/wherever
$ mount sprout device /mnt/wherever
$ btrfs device stats /mnt/wherever
This will fail with the above message in dmesg.
Fix this by iterating over the fs_devices->seed if they exist in
btrfs_init_dev_stats. This fixed the problem and properly reports the
stats for both devices.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ rename to btrfs_device_init_dev_stats ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
It's no longer used just remove the function and any related code which
was initialising it for inodes. No functional changes.
Removing 8 bytes from extent_io_tree in turn reduces size of other
structures where it is embedded, notably btrfs_inode where it reduces
size by 24 bytes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
No need to go through a function pointer indirection simply call
submit_bio_hook directly by exporting and renaming the helper to
btrfs_submit_metadata_bio. This makes the code more readable and should
result in somewhat faster code due to no longer paying the price for
specualtive attack mitigations that come with indirect function calls.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead export and rename the function to btrfs_submit_data_bio and
call it directly in submit_one_bio. This avoids paying the cost for
speculative attacks mitigations and improves code readability.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Use the is_data_inode helper.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
BTRFS has 2 inode types (for the purposes of the code in submit_one_bio)
- ordinary data inodes (including the freespace inode) and the btree
inode. Both of these implement submit_bio_hook so btrfsic_submit_bio can
never be called from submit_one_bio so just remove it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
It's no longer used so let's remove it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Don't call readpage_end_io_hook for the btree inode. Instead of relying
on indirect calls to implement metadata buffer validation simply check
if the inode whose page we are processing equals the btree inode. If it
does call the necessary function.
This is an improvement in 2 directions:
1. We aren't paying the penalty of indirect calls in a post-speculation
attacks world.
2. The function is now named more explicitly so it's obvious what's
going on
This is in preparation to removing struct extent_io_ops altogether.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
During an incremental send, when an inode has multiple new references we
might end up emitting rename operations for orphanizations that have a
source path that is no longer valid due to a previous orphanization of
some directory inode. This causes the receiver to fail since it tries
to rename a path that does not exists.
Example reproducer:
$ cat reproducer.sh
#!/bin/bash
mkfs.btrfs -f /dev/sdi >/dev/null
mount /dev/sdi /mnt/sdi
touch /mnt/sdi/f1
touch /mnt/sdi/f2
mkdir /mnt/sdi/d1
mkdir /mnt/sdi/d1/d2
# Filesystem looks like:
#
# . (ino 256)
# |----- f1 (ino 257)
# |----- f2 (ino 258)
# |----- d1/ (ino 259)
# |----- d2/ (ino 260)
btrfs subvolume snapshot -r /mnt/sdi /mnt/sdi/snap1
btrfs send -f /tmp/snap1.send /mnt/sdi/snap1
# Now do a series of changes such that:
#
# *) inode 258 has one new hardlink and the previous name changed
#
# *) both names conflict with the old names of two other inodes:
#
# 1) the new name "d1" conflicts with the old name of inode 259,
# under directory inode 256 (root)
#
# 2) the new name "d2" conflicts with the old name of inode 260
# under directory inode 259
#
# *) inodes 259 and 260 now have the old names of inode 258
#
# *) inode 257 is now located under inode 260 - an inode with a number
# smaller than the inode (258) for which we created a second hard
# link and swapped its names with inodes 259 and 260
#
ln /mnt/sdi/f2 /mnt/sdi/d1/f2_link
mv /mnt/sdi/f1 /mnt/sdi/d1/d2/f1
# Swap d1 and f2.
mv /mnt/sdi/d1 /mnt/sdi/tmp
mv /mnt/sdi/f2 /mnt/sdi/d1
mv /mnt/sdi/tmp /mnt/sdi/f2
# Swap d2 and f2_link
mv /mnt/sdi/f2/d2 /mnt/sdi/tmp
mv /mnt/sdi/f2/f2_link /mnt/sdi/f2/d2
mv /mnt/sdi/tmp /mnt/sdi/f2/f2_link
# Filesystem now looks like:
#
# . (ino 256)
# |----- d1 (ino 258)
# |----- f2/ (ino 259)
# |----- f2_link/ (ino 260)
# | |----- f1 (ino 257)
# |
# |----- d2 (ino 258)
btrfs subvolume snapshot -r /mnt/sdi /mnt/sdi/snap2
btrfs send -f /tmp/snap2.send -p /mnt/sdi/snap1 /mnt/sdi/snap2
mkfs.btrfs -f /dev/sdj >/dev/null
mount /dev/sdj /mnt/sdj
btrfs receive -f /tmp/snap1.send /mnt/sdj
btrfs receive -f /tmp/snap2.send /mnt/sdj
umount /mnt/sdi
umount /mnt/sdj
When executed the receive of the incremental stream fails:
$ ./reproducer.sh
Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap1'
At subvol /mnt/sdi/snap1
Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap2'
At subvol /mnt/sdi/snap2
At subvol snap1
At snapshot snap2
ERROR: rename d1/d2 -> o260-6-0 failed: No such file or directory
This happens because:
1) When processing inode 257 we end up computing the name for inode 259
because it is an ancestor in the send snapshot, and at that point it
still has its old name, "d1", from the parent snapshot because inode
259 was not yet processed. We then cache that name, which is valid
until we start processing inode 259 (or set the progress to 260 after
processing its references);
2) Later we start processing inode 258 and collecting all its new
references into the list sctx->new_refs. The first reference in the
list happens to be the reference for name "d1" while the reference for
name "d2" is next (the last element of the list).
We compute the full path "d1/d2" for this second reference and store
it in the reference (its ->full_path member). The path used for the
new parent directory was "d1" and not "f2" because inode 259, the
new parent, was not yet processed;
3) When we start processing the new references at process_recorded_refs()
we start with the first reference in the list, for the new name "d1".
Because there is a conflicting inode that was not yet processed, which
is directory inode 259, we orphanize it, renaming it from "d1" to
"o259-6-0";
4) Then we start processing the new reference for name "d2", and we
realize it conflicts with the reference of inode 260 in the parent
snapshot. So we issue an orphanization operation for inode 260 by
emitting a rename operation with a destination path of "o260-6-0"
and a source path of "d1/d2" - this source path is the value we
stored in the reference earlier at step 2), corresponding to the
->full_path member of the reference, however that path is no longer
valid due to the orphanization of the directory inode 259 in step 3).
This makes the receiver fail since the path does not exists, it should
have been "o259-6-0/d2".
Fix this by recomputing the full path of a reference before emitting an
orphanization if we previously orphanized any directory, since that
directory could be a parent in the new path. This is a rare scenario so
keeping it simple and not checking if that previously orphanized directory
is in fact an ancestor of the inode we are trying to orphanize.
A test case for fstests follows soon.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When doing an incremental send it is possible that when processing the new
references for an inode we end up issuing rename or link operations that
have an invalid path, which contains the orphanized name of a directory
before we actually orphanized it, causing the receiver to fail.
The following reproducer triggers such scenario:
$ cat reproducer.sh
#!/bin/bash
mkfs.btrfs -f /dev/sdi >/dev/null
mount /dev/sdi /mnt/sdi
touch /mnt/sdi/a
touch /mnt/sdi/b
mkdir /mnt/sdi/testdir
# We want "a" to have a lower inode number then "testdir" (257 vs 259).
mv /mnt/sdi/a /mnt/sdi/testdir/a
# Filesystem looks like:
#
# . (ino 256)
# |----- testdir/ (ino 259)
# | |----- a (ino 257)
# |
# |----- b (ino 258)
btrfs subvolume snapshot -r /mnt/sdi /mnt/sdi/snap1
btrfs send -f /tmp/snap1.send /mnt/sdi/snap1
# Now rename 259 to "testdir_2", then change the name of 257 to
# "testdir" and make it a direct descendant of the root inode (256).
# Also create a new link for inode 257 with the old name of inode 258.
# By swapping the names and location of several inodes and create a
# nasty dependency chain of rename and link operations.
mv /mnt/sdi/testdir/a /mnt/sdi/a2
touch /mnt/sdi/testdir/a
mv /mnt/sdi/b /mnt/sdi/b2
ln /mnt/sdi/a2 /mnt/sdi/b
mv /mnt/sdi/testdir /mnt/sdi/testdir_2
mv /mnt/sdi/a2 /mnt/sdi/testdir
# Filesystem now looks like:
#
# . (ino 256)
# |----- testdir_2/ (ino 259)
# | |----- a (ino 260)
# |
# |----- testdir (ino 257)
# |----- b (ino 257)
# |----- b2 (ino 258)
btrfs subvolume snapshot -r /mnt/sdi /mnt/sdi/snap2
btrfs send -f /tmp/snap2.send -p /mnt/sdi/snap1 /mnt/sdi/snap2
mkfs.btrfs -f /dev/sdj >/dev/null
mount /dev/sdj /mnt/sdj
btrfs receive -f /tmp/snap1.send /mnt/sdj
btrfs receive -f /tmp/snap2.send /mnt/sdj
umount /mnt/sdi
umount /mnt/sdj
When running the reproducer, the receive of the incremental send stream
fails:
$ ./reproducer.sh
Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap1'
At subvol /mnt/sdi/snap1
Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap2'
At subvol /mnt/sdi/snap2
At subvol snap1
At snapshot snap2
ERROR: link b -> o259-6-0/a failed: No such file or directory
The problem happens because of the following:
1) Before we start iterating the list of new references for inode 257,
we generate its current path and store it at @valid_path, done at
the very beginning of process_recorded_refs(). The generated path
is "o259-6-0/a", containing the orphanized name for inode 259;
2) Then we iterate over the list of new references, which has the
references "b" and "testdir" in that specific order;
3) We process reference "b" first, because it is in the list before
reference "testdir". We then issue a link operation to create
the new reference "b" using a target path corresponding to the
content at @valid_path, which corresponds to "o259-6-0/a".
However we haven't yet orphanized inode 259, its name is still
"testdir", and not "o259-6-0". The orphanization of 259 did not
happen yet because we will process the reference named "testdir"
for inode 257 only in the next iteration of the loop that goes
over the list of new references.
Fix the issue by having a preliminar iteration over all the new references
at process_recorded_refs(). This iteration is responsible only for doing
the orphanization of other inodes that have and old reference that
conflicts with one of the new references of the inode we are currently
processing. The emission of rename and link operations happen now in the
next iteration of the new references.
A test case for fstests will follow soon.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Commit 259ee7754b67 ("btrfs: tree-checker: Add ROOT_ITEM check")
introduced btrfs root item size check, however btrfs root item has two
versions, the legacy one which just ends before generation_v2 member, is
smaller than current btrfs root item size.
This caused btrfs kernel to reject valid but old tree root leaves.
Fix this problem by also allowing legacy root item, since kernel can
already handle them pretty well and upgrade to newer root item format
when needed.
Reported-by: Martin Steigerwald <martin@lichtvoll.de>
Fixes: 259ee7754b67 ("btrfs: tree-checker: Add ROOT_ITEM check")
CC: stable@vger.kernel.org # 5.4+
Tested-By: Martin Steigerwald <martin@lichtvoll.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In the definitions generated by BTRFS_SETGET_HEADER_FUNCS there's direct
pointer assignment but we should use the helpers for unaligned access
for clarity. It hasn't been a problem so far because of the natural
alignment.
Similarly for BTRFS_SETGET_STACK_FUNCS, that usually get a structure
from stack that has an aligned start but some members may not be aligned
due to packing. This as well hasn't caused problems so far.
Move the put/get_unaligned_le8 stubs to ctree.h so we can use them.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The free space inode stores the tracking data, checksums etc, using the
io_ctl structure and moving the pointers. The data are generally aligned
to at least 4 bytes (u32 for CRC) so it's not completely unaligned but
for clarity we should use the proper helpers whenever a struct is
initialized from io_ctl->cur pointer.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The header is mapped onto the send buffer and thus its members may be
potentially unaligned so use the helpers instead of directly assigning
the pointers. This has worked so far but let's use the helpers to make
that clear.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Btree inode is special compared to all other inode extent io_trees,
although it has a btrfs inode, it doesn't have the track_uptodate bit at
all.
This means a lot of things like extent locking doesn't even need to be
applied to btree io tree.
Since it's so special, adds a new owner value for it to make debuging a
little easier.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have several occurrences of a soft lockup from fstest's generic/175
testcase, which look more or less like this one:
watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [xfs_io:10030]
Kernel panic - not syncing: softlockup: hung tasks
CPU: 0 PID: 10030 Comm: xfs_io Tainted: G L 5.9.0-rc5+ #768
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014
Call Trace:
<IRQ>
dump_stack+0x77/0xa0
panic+0xfa/0x2cb
watchdog_timer_fn.cold+0x85/0xa5
? lockup_detector_update_enable+0x50/0x50
__hrtimer_run_queues+0x99/0x4c0
? recalibrate_cpu_khz+0x10/0x10
hrtimer_run_queues+0x9f/0xb0
update_process_times+0x28/0x80
tick_handle_periodic+0x1b/0x60
__sysvec_apic_timer_interrupt+0x76/0x210
asm_call_on_stack+0x12/0x20
</IRQ>
sysvec_apic_timer_interrupt+0x7f/0x90
asm_sysvec_apic_timer_interrupt+0x12/0x20
RIP: 0010:btrfs_tree_unlock+0x91/0x1a0 [btrfs]
RSP: 0018:ffffc90007123a58 EFLAGS: 00000282
RAX: ffff8881cea2fbe0 RBX: ffff8881cea2fbe0 RCX: 0000000000000000
RDX: ffff8881d23fd200 RSI: ffffffff82045220 RDI: ffff8881cea2fba0
RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000032
R10: 0000160000000000 R11: 0000000000001000 R12: 0000000000001000
R13: ffff8882357fd5b0 R14: ffff88816fa76e70 R15: ffff8881cea2fad0
? btrfs_tree_unlock+0x15b/0x1a0 [btrfs]
btrfs_release_path+0x67/0x80 [btrfs]
btrfs_insert_replace_extent+0x177/0x2c0 [btrfs]
btrfs_replace_file_extents+0x472/0x7c0 [btrfs]
btrfs_clone+0x9ba/0xbd0 [btrfs]
btrfs_clone_files.isra.0+0xeb/0x140 [btrfs]
? file_update_time+0xcd/0x120
btrfs_remap_file_range+0x322/0x3b0 [btrfs]
do_clone_file_range+0xb7/0x1e0
vfs_clone_file_range+0x30/0xa0
ioctl_file_clone+0x8a/0xc0
do_vfs_ioctl+0x5b2/0x6f0
__x64_sys_ioctl+0x37/0xa0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f87977fc247
RSP: 002b:00007ffd51a2f6d8 EFLAGS: 00000206 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f87977fc247
RDX: 00007ffd51a2f710 RSI: 000000004020940d RDI: 0000000000000003
RBP: 0000000000000004 R08: 00007ffd51a79080 R09: 0000000000000000
R10: 00005621f11352f2 R11: 0000000000000206 R12: 0000000000000000
R13: 0000000000000000 R14: 00005621f128b958 R15: 0000000080000000
Kernel Offset: disabled
---[ end Kernel panic - not syncing: softlockup: hung tasks ]---
All of these lockup reports have the call chain btrfs_clone_files() ->
btrfs_clone() in common. btrfs_clone_files() calls btrfs_clone() with
both source and destination extents locked and loops over the source
extent to create the clones.
Conditionally reschedule in the btrfs_clone() loop, to give some time back
to other processes.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Replace kvzalloc() call with kvcalloc() that also checks the size
internally. There's a standalone overflow check in the function so we
can return invalid parameter combination. Use array_size() helper to
compute the memory size for clone_sources_tmp.
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Denis Efremov <efremov@linux.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_ioctl_send() used open-coded kvzalloc implementation earlier.
The code was accidentally replaced with kzalloc() call [1]. Restore
the original code by using kvzalloc() to allocate sctx->clone_roots.
[1] https://patchwork.kernel.org/patch/9757891/#20529627
Fixes: 818e010bf9d0 ("btrfs: replace opencoded kvzalloc with the helper")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Denis Efremov <efremov@linux.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
