| Age | Commit message (Collapse) | Author |
|---|
|
Add a method to configure the PHY's in-band mode.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUru-006IUI-08@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide an implementation for phy_inband_caps() for Marvell PHYs used
on SFP modules, so that phylink knows the PHYs capabilities.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUro-006IUC-Rq@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM84881 has no support for inband signalling, so this is a trivial
implementation that returns no support for inband.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/E1tIUrj-006IU6-ON@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a method to query the PHY's in-band capabilities for a PHY
interface mode.
Where the interface mode does not have in-band capability, or the PHY
driver has not been updated to return this information, then
phy_inband_caps() should return zero. Otherwise, PHY drivers will
return a value consisting of the following flags:
LINK_INBAND_DISABLE indicates that the hardware does not support
in-band signalling, or can have in-band signalling configured via
software to be disabled.
LINK_INBAND_ENABLE indicates that the hardware will use in-band
signalling, or can have in-band signalling configured via software
to be enabled.
LINK_INBAND_BYPASS indicates that the hardware has the ability to
bypass in-band signalling when enabled after a timeout if the link
partner does not respond to its in-band signalling.
This reports the PHY capabilities for the particular interface mode,
not the current configuration.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUre-006ITz-KF@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that we have a more complexity in phylink_major_config(), augment
the debugging so we can see what's going on there.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUrZ-006ITt-Fa@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is an interdependence between the current link_an_mode and
pcs_neg_mode that some drivers rely upon to know whether inband or PHY
mode will be used.
In order to support detection of PCS and PHY inband capabilities
resulting in automatic selection of inband or PHY mode, we need to
cater for this, and support changing the MAC link_an_mode. However, we
end up with an inter-dependency between the current link_an_mode and
pcs_neg_mode.
To solve this, split the current link_an_mode into the requested
link_an_mode and active link_an_mode. The requested link_an_mode will
always be passed to phylink_pcs_neg_mode(), and the active link_an_mode
will be used for everything else, and only updated during
phylink_major_config(). This will ensure that phylink_pcs_neg_mode()'s
link_an_mode will not depend on the active link_an_mode that will,
in a future patch, depend on pcs_neg_mode.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUrU-006ITn-Ai@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the call to phylink_pcs_neg_mode() in phylink_major_config() after
we have selected the appropriate PCS to allow the PCS to be passed in.
Add struct phylink and struct phylink_pcs pointers to
phylink_pcs_neg_mode() and pass in the appropriate structures. Set
pl->pcs_neg_mode before returning, and remove the return value.
This will allow the capabilities of the PCS and any PHY to be used when
deciding which pcs_neg_mode should be used.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUrP-006ITh-6u@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver is currently using an ACL key block that is not supported by
Spectrum-4. This works because the driver is only using a single field
from this key block which is located in the same offset in the
equivalent Spectrum-4 key block.
The issue was discovered when the firmware started rejecting the use of
the unsupported key block. The change has been reverted to avoid
breaking users that only update their firmware.
Nonetheless, fix the issue by using the correct key block.
Fixes: 07ff135958dd ("mlxsw: Introduce flex key elements for Spectrum-4")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/35e72c97bdd3bc414fb8e4d747e5fb5d26c29658.1733237440.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
1. Add RTL907XD-VA hardware version id.
2. Add the reported speed for RTL907XD-VA.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20241203103146.734516-1-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Maksym Kutsevol says:
====================
netcons: Add udp send fail statistics to netconsole
Enhance observability of netconsole. Packet sends can fail.
Start tracking at least two failure possibilities: ENOMEM and
NET_XMIT_DROP for every target. Stats are exposed via an additional
attribute in CONFIGFS.
The exposed statistics allows easier debugging of cases when netconsole
messages were not seen by receivers, eliminating the guesswork if the
sender thinks that messages in question were sent out.
Stats are not reset on enable/disable/change remote ip/etc, they
belong to the netcons target itself.
====================
Link: https://patch.msgid.link/20241202-netcons-add-udp-send-fail-statistics-to-netconsole-v5-0-70e82239f922@kutsevol.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enhance observability of netconsole. Packet sends can fail.
Start tracking at least two failure possibilities: ENOMEM and
NET_XMIT_DROP for every target. Stats are exposed via an additional
attribute in CONFIGFS.
The exposed statistics allows easier debugging of cases when netconsole
messages were not seen by receivers, eliminating the guesswork if the
sender thinks that messages in question were sent out.
Stats are not reset on enable/disable/change remote ip/etc, they
belong to the netcons target itself.
Reported-by: Breno Leitao <leitao@debian.org>
Closes: https://lore.kernel.org/all/ZsWoUzyK5du9Ffl+@gmail.com/
Signed-off-by: Maksym Kutsevol <max@kutsevol.com>
Link: https://patch.msgid.link/20241202-netcons-add-udp-send-fail-statistics-to-netconsole-v5-2-70e82239f922@kutsevol.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netpoll_send_udp can return if send was successful.
It will allow client code to be aware of the send status.
Possible return values are the result of __netpoll_send_skb (cast to int)
and -ENOMEM. This doesn't cover the case when TX was not successful
instantaneously and was scheduled for later, __netpoll__send_skb returns
success in that case.
Signed-off-by: Maksym Kutsevol <max@kutsevol.com>
Link: https://patch.msgid.link/20241202-netcons-add-udp-send-fail-statistics-to-netconsole-v5-1-70e82239f922@kutsevol.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A bitset without mask in a _SET request means we want exactly the bits in
the bitset to be set. This works correctly for compact format but when
verbose format is parsed, ethnl_update_bitset32_verbose() only sets the
bits present in the request bitset but does not clear the rest. The commit
6699170376ab ("ethtool: fix application of verbose no_mask bitset") fixes
this issue by clearing the whole target bitmap before we start iterating.
The solution proposed brought an issue with the behavior of the mod
variable. As the bitset is always cleared the old value will always
differ to the new value.
Fix it by adding a new function to compare bitmaps and a temporary variable
which save the state of the old bitmap.
Fixes: 6699170376ab ("ethtool: fix application of verbose no_mask bitset")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20241202153358.1142095-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric reported a syzkaller-triggered splat caused by recent ipmr changes:
WARNING: CPU: 2 PID: 6041 at net/ipv6/ip6mr.c:419
ip6mr_free_table+0xbd/0x120 net/ipv6/ip6mr.c:419
Modules linked in:
CPU: 2 UID: 0 PID: 6041 Comm: syz-executor183 Not tainted
6.12.0-syzkaller-10681-g65ae975e97d5 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:ip6mr_free_table+0xbd/0x120 net/ipv6/ip6mr.c:419
Code: 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c
02 00 75 58 49 83 bc 24 c0 0e 00 00 00 74 09 e8 44 ef a9 f7 90 <0f> 0b
90 e8 3b ef a9 f7 48 8d 7b 38 e8 12 a3 96 f7 48 89 df be 0f
RSP: 0018:ffffc90004267bd8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88803c710000 RCX: ffffffff89e4d844
RDX: ffff88803c52c880 RSI: ffffffff89e4d87c RDI: ffff88803c578ec0
RBP: 0000000000000001 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffff88803c578000
R13: ffff88803c710000 R14: ffff88803c710008 R15: dead000000000100
FS: 00007f7a855ee6c0(0000) GS:ffff88806a800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7a85689938 CR3: 000000003c492000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ip6mr_rules_exit+0x176/0x2d0 net/ipv6/ip6mr.c:283
ip6mr_net_exit_batch+0x53/0xa0 net/ipv6/ip6mr.c:1388
ops_exit_list+0x128/0x180 net/core/net_namespace.c:177
setup_net+0x4fe/0x860 net/core/net_namespace.c:394
copy_net_ns+0x2b4/0x6b0 net/core/net_namespace.c:500
create_new_namespaces+0x3ea/0xad0 kernel/nsproxy.c:110
unshare_nsproxy_namespaces+0xc0/0x1f0 kernel/nsproxy.c:228
ksys_unshare+0x45d/0xa40 kernel/fork.c:3334
__do_sys_unshare kernel/fork.c:3405 [inline]
__se_sys_unshare kernel/fork.c:3403 [inline]
__x64_sys_unshare+0x31/0x40 kernel/fork.c:3403
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7a856332d9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48
89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d
01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f7a855ee238 EFLAGS: 00000246 ORIG_RAX: 0000000000000110
RAX: ffffffffffffffda RBX: 00007f7a856bd308 RCX: 00007f7a856332d9
RDX: 00007f7a8560f8c6 RSI: 0000000000000000 RDI: 0000000062040200
RBP: 00007f7a856bd300 R08: 00007fff932160a7 R09: 00007f7a855ee6c0
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f7a856bd30c
R13: 0000000000000000 R14: 00007fff93215fc0 R15: 00007fff932160a8
</TASK>
The root cause is a network namespace creation failing after successful
initialization of the ipmr subsystem. Such a case is not currently
matched by the ipmr_can_free_table() helper.
New namespaces are zeroed on allocation and inserted into net ns list
only after successful creation; when deleting an ipmr table, the list
next pointer can be NULL only on netns initialization failure.
Update the ipmr_can_free_table() checks leveraging such condition.
Reported-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+6e8cb445d4b43d006e0c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6e8cb445d4b43d006e0c
Fixes: 11b6e701bce9 ("ipmr: add debug check for mr table cleanup")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/8bde975e21bbca9d9c27e36209b2dd4f1d7a3f00.1733212078.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the __netpoll_setup() function, when accessing the device's npinfo
pointer, replace rcu_access_pointer() with rtnl_dereference(). This
change is more appropriate, as suggested by Herbert Xu[1].
The function is called with the RTNL mutex held, and the pointer is
being dereferenced later, so, dereference earlier and just reuse the
pointer for the if/else.
The replacement ensures correct pointer access while maintaining
the existing locking and RCU semantics of the netpoll subsystem.
Link: https://lore.kernel.org/lkml/Zz1cKZYt1e7elibV@gondor.apana.org.au/ [1]
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://patch.msgid.link/20241202-netpoll_rcu_herbet_fix-v2-1-2b9d58edc76a@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rhashtable does not provide stable walk, duplicated elements are
possible in case of resizing. I considered that checking for errors when
calling rhashtable_walk_next() was sufficient to detect the resizing.
However, rhashtable_walk_next() returns -EAGAIN only at the end of the
iteration, which is too late, because a gc work containing duplicated
elements could have been already scheduled for removal to the worker.
Add a u32 gc worker sequence number per set, bump it on every workqueue
run. Annotate gc worker sequence number on the expired element. Use it
to skip those already seen in this gc workqueue run.
Note that this new field is never reset in case gc transaction fails, so
next gc worker run on the expired element overrides it. Wraparound of gc
worker sequence number should not be an issue with stale gc worker
sequence number in the element, that would just postpone the element
removal in one gc run.
Note that it is not possible to use flags to annotate that element is
pending gc run to detect duplicates, given that gc transaction can be
invalidated in case of update from the control plane, therefore, not
allowing to clear such flag.
On x86_64, pahole reports no changes in the size of nft_rhash_elem.
Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API")
Reported-by: Laurent Fasnacht <laurent.fasnacht@proton.ch>
Tested-by: Laurent Fasnacht <laurent.fasnacht@proton.ch>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix bugs about EFI screen info, hugetlb pte clear and Lockdep-RCU
splat in KVM, plus some trival cleanups"
* tag 'loongarch-fixes-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Protect kvm_io_bus_{read,write}() with SRCU
LoongArch: KVM: Protect kvm_check_requests() with SRCU
LoongArch: BPF: Adjust the parameter of emit_jirl()
LoongArch: Add architecture specific huge_pte_clear()
LoongArch/irq: Use seq_put_decimal_ull_width() for decimal values
LoongArch: Fix reserving screen info memory for above-4G firmware
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- asus-nb-wmi: Silence unknown event warning when charger is plugged in
- asus-wmi: Handle return code variations during thermal policy writing
graciously
- samsung-laptop: Correct module description
* tag 'platform-drivers-x86-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-nb-wmi: Ignore unknown event 0xCF
platform/x86: asus-wmi: Ignore return value when writing thermal policy
platform/x86: samsung-laptop: Match MODULE_DESCRIPTION() to functionality
|
|
The cmp_entries_dup() function used as the comparator for sort()
violated the symmetry and transitivity properties required by the
sorting algorithm. Specifically, it returned 1 whenever memcmp() was
non-zero, which broke the following expectations:
* Symmetry: If x < y, then y > x.
* Transitivity: If x < y and y < z, then x < z.
These violations could lead to incorrect sorting and failure to
correctly identify duplicate elements.
Fix the issue by directly returning the result of memcmp(), which
adheres to the required comparison properties.
Cc: stable@vger.kernel.org
Fixes: 08d43a5fa063 ("tracing: Add lock-free tracing_map")
Link: https://lore.kernel.org/20241203202228.1274403-1-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
User space may unload ip_set.ko while it is itself requesting a set type
backend module, leading to a kernel crash. The race condition may be
provoked by inserting an mdelay() right after the nfnl_unlock() call.
Fixes: a7b4f989a629 ("netfilter: ipset: IP set core support")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Changes to sch->q.qlen around qdisc_tree_reduce_backlog() need to happen
_before_ a call to said function because otherwise it may fail to notify
parent qdiscs when the child is about to become empty.
Signed-off-by: Lion Ackermann <nnamrec@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When matching erspan_opt in cls_flower, only the (version, dir, hwid)
fields are relevant. However, in fl_set_erspan_opt() it initializes
all bits of erspan_opt and its mask to 1. This inadvertently requires
packets to match not only the (version, dir, hwid) fields but also the
other fields that are unexpectedly set to 1.
This patch resolves the issue by ensuring that only the (version, dir,
hwid) fields are configured in fl_set_erspan_opt(), leaving the other
fields to 0 in erspan_opt.
Fixes: 79b1011cb33d ("net: sched: allow flower to match erspan options")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a follow-up to 982300c115d2 ("r8169: remove detection of chip
version 11 (early RTL8168b)"). Nobody complained yet, so remove
support for this chip version.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/b689ab6d-20b5-4b64-bd7e-531a0a972ba3@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After 854d71c555dfc3 ("r8169: remove original workaround for RTL8125
broken rx issue") this flag isn't used any longer. So remove it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/d9dd214b-3027-4f60-b0e8-6f34a0c76582@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The check for non-zero ring with RSS is only relevant for
ETHTOOL_SRXCLSRLINS command, in other cases the check tries to access
memory which was not initialized by the userspace tool. Only perform the
check in case of ETHTOOL_SRXCLSRLINS.
Without this patch, filter deletion (for example) could statistically
result in a false error:
# ethtool --config-ntuple eth3 delete 484
rmgr: Cannot delete RX class rule: Invalid argument
Cannot delete classification rule
Fixes: 9e43ad7a1ede ("net: ethtool: only allow set_rxnfc with rss + ring_cookie if driver opts in")
Link: https://lore.kernel.org/netdev/871a9ecf-1e14-40dd-bbd7-e90c92f89d47@nvidia.com/
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20241202164805.1637093-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 612b1c0dec5bc7367f90fc508448b8d0d7c05414. On a
scenario with multiple threads blocking on a recvfrom(), we need to call
sock_def_readable() on every __udp_enqueue_schedule_skb() otherwise the
threads won't be woken up as __skb_wait_for_more_packets() is using
prepare_to_wait_exclusive().
Link: https://bugzilla.redhat.com/2308477
Fixes: 612b1c0dec5b ("udp: avoid calling sock_def_readable() if possible")
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241202155620.1719-1-ffmancera@riseup.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make napi_hash_lock IRQ safe. It is used during the control path, and is
taken and released in napi_hash_add and napi_hash_del, which will
typically be called by calls to napi_enable and napi_disable.
This change avoids a deadlock in pcnet32 (and other any other drivers
which follow the same pattern):
CPU 0:
pcnet32_open
spin_lock_irqsave(&lp->lock, ...)
napi_enable
napi_hash_add <- before this executes, CPU 1 proceeds
spin_lock(napi_hash_lock)
[...]
spin_unlock_irqrestore(&lp->lock, flags);
CPU 1:
pcnet32_close
napi_disable
napi_hash_del
spin_lock(napi_hash_lock)
< INTERRUPT >
pcnet32_interrupt
spin_lock(lp->lock) <- DEADLOCK
Changing the napi_hash_lock to be IRQ safe prevents the IRQ from firing
on CPU 1 until napi_hash_lock is released, preventing the deadlock.
Cc: stable@vger.kernel.org
Fixes: 86e25f40aa1e ("net: napi: Add napi_config")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/netdev/85dd4590-ea6b-427d-876a-1d8559c7ad82@roeck-us.net/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241202182103.363038-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit b32913a5609a36c230e9b091da26d38f8e80a056.
Linus applied directly commit e70140ba0d2b ("Get rid of 'remove_new'
relic from platform driver struct"), drop our local change to avoid
conflicts.
Link: https://lore.kernel.org/CAMuHMdV3J=o2x9G=1t_y97iv9eLsPfiej108vU6JHnn=AR-Nvw@mail.gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Softirq can interrupt ongoing packet from process context that is
walking over the percpu area that contains inner header offsets.
Disable bh and perform three checks before restoring the percpu inner
header offsets to validate that the percpu area is valid for this
skbuff:
1) If the NFT_PKTINFO_INNER_FULL flag is set on, then this skbuff
has already been parsed before for inner header fetching to
register.
2) Validate that the percpu area refers to this skbuff using the
skbuff pointer as a cookie. If there is a cookie mismatch, then
this skbuff needs to be parsed again.
3) Finally, validate if the percpu area refers to this tunnel type.
Only after these three checks the percpu area is restored to a on-stack
copy and bh is enabled again.
After inner header fetching, the on-stack copy is stored back to the
percpu area.
Fixes: 3a07327d10a0 ("netfilter: nft_inner: support for inner tunnel header matching")
Reported-by: syzbot+84d0441b9860f0d63285@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- add lockdep annotations for io_uring/encoded read integration, inode
lock is held when returning to userspace
- properly reflect experimental config option to sysfs
- handle NULL root in case the rescue mode accepts invalid/damaged tree
roots (rescue=ibadroot)
- regression fix of a deadlock between transaction and extent locks
- fix pending bio accounting bug in encoded read ioctl
- fix NOWAIT mode when checking references for NOCOW files
- fix use-after-free in a rb-tree cleanup in ref-verify debugging tool
* tag 'for-6.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix lockdep warnings on io_uring encoded reads
btrfs: ref-verify: fix use-after-free after invalid ref action
btrfs: add a sanity check for btrfs root in btrfs_search_slot()
btrfs: don't loop for nowait writes when checking for cross references
btrfs: sysfs: advertise experimental features only if CONFIG_BTRFS_EXPERIMENTAL=y
btrfs: fix deadlock between transaction commits and extent locks
btrfs: fix use-after-free in btrfs_encoded_read_endio()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota and udf fixes from Jan Kara:
"Two small UDF fixes for better handling of corrupted filesystem and a
quota fix to fix handling of filesystem freezing"
* tag 'fs_for_v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Verify inode link counts before performing rename
udf: Skip parent dir link count update if corrupted
quota: flush quota_release_work upon quota writeback
|
|
Pull xfs fixes from Carlos Maiolino:
- Use xchg() in xlog_cil_insert_pcp_aggregate()
- Fix ABBA deadlock on a race between mount and log shutdown
- Fix quota softlimit incoherency on delalloc
- Fix sparse inode limits on runt AG
- remove unknown compat feature checks in SB write valdation
- Eliminate a lockdep false positive
* tag 'xfs-fixes-6.13-rc2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: don't call xfs_bmap_same_rtgroup in xfs_bmap_add_extent_hole_delay
xfs: Use xchg() in xlog_cil_insert_pcp_aggregate()
xfs: prevent mount and log shutdown race
xfs: delalloc and quota softlimit timers are incoherent
xfs: fix sparse inode limits on runt AG
xfs: remove unknown compat feature check in superblock write validation
xfs: eliminate lockdep false positives in xfs_attr_shortform_list
|
|
The pci_register_driver() can fail and when this happened, the dca_notifier
needs to be unregistered, otherwise the dca_notifier can be called when
igb fails to install, resulting to invalid memory access.
Fixes: bbd98fe48a43 ("igb: Fix DCA errors and do not use context index for 82576")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
SFF-8472 (section 5.4 Transceiver Compliance Codes) defines bit 6 as
BASE-BX10. Bit 6 means a value of 0x40 (decimal 64).
The current value in the source code is 0x64, which appears to be a
mix-up of hex and decimal values. A value of 0x64 (binary 01100100)
incorrectly sets bit 2 (1000BASE-CX) and bit 5 (100BASE-FX) as well.
Fixes: 1b43e0d20f2d ("ixgbe: Add 1000BASE-BX support")
Signed-off-by: Tore Amundsen <tore@amundsen.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Ernesto Castellotti <ernesto@castellotti.net>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ixgbe PF driver logs an info message when a VF attempts to negotiate an
API version which it does not support:
VF 0 requested invalid api version 6
The ixgbevf driver attempts to load with mailbox API v1.5, which is
required for best compatibility with other hosts such as the ESX VMWare PF.
The Linux PF only supports API v1.4, and does not currently have support
for the v1.5 API.
The logged message can confuse users, as the v1.5 API is valid, but just
happens to not currently be supported by the Linux PF.
Downgrade the info message to a debug message, and fix the language to
use 'unsupported' instead of 'invalid' to improve message clarity.
Long term, we should investigate whether the improvements in the v1.5 API
make sense for the Linux PF, and if so implement them properly. This may
require yet another API version to resolve issues with negotiating IPSEC
offload support.
Fixes: 339f28964147 ("ixgbevf: Add support for new mailbox communication between PF and VF")
Reported-by: Yifei Liu <yifei.l.liu@oracle.com>
Link: https://lore.kernel.org/intel-wired-lan/20240301235837.3741422-1-yifei.l.liu@oracle.com/
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Commit 339f28964147 ("ixgbevf: Add support for new mailbox communication
between PF and VF") added support for v1.5 of the PF to VF mailbox
communication API. This commit mistakenly enabled IPSEC offload for API
v1.5.
No implementation of the v1.5 API has support for IPSEC offload. This
offload is only supported by the Linux PF as mailbox API v1.4. In fact, the
v1.5 API is not implemented in any Linux PF.
Attempting to enable IPSEC offload on a PF which supports v1.5 API will not
work. Only the Linux upstream ixgbe and ixgbevf support IPSEC offload, and
only as part of the v1.4 API.
Fix the ixgbevf Linux driver to stop attempting IPSEC offload when
the mailbox API does not support it.
The existing API design choice makes it difficult to support future API
versions, as other non-Linux hosts do not implement IPSEC offload. If we
add support for v1.5 to the Linux PF, then we lose support for IPSEC
offload.
A full solution likely requires a new mailbox API with a proper negotiation
to check that IPSEC is actually supported by the host.
Fixes: 339f28964147 ("ixgbevf: Add support for new mailbox communication between PF and VF")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Commit d9028db618a6 ("idpf: convert to libeth Tx buffer completion")
inadvertently removed code that was necessary for the tx buffer cleaning
routine to iterate over all buffers associated with a packet.
When a frag is too large for a single data descriptor, it will be split
across multiple data descriptors. This means the frag will span multiple
buffers in the buffer ring in order to keep the descriptor and buffer
ring indexes aligned. The buffer entries in the ring are technically
empty and no cleaning actions need to be performed. These empty buffers
can precede other frags associated with the same packet. I.e. a single
packet on the buffer ring can look like:
buf[0]=skb0.frag0
buf[1]=skb0.frag1
buf[2]=empty
buf[3]=skb0.frag2
The cleaning routine iterates through these buffers based on a matching
completion tag. If the completion tag is not set for buf2, the loop will
end prematurely. Frag2 will be left uncleaned and next_to_clean will be
left pointing to the end of packet, which will break the cleaning logic
for subsequent cleans. This consequently leads to tx timeouts.
Assign the empty bufs the same completion tag for the packet to ensure
the cleaning routine iterates over all of the buffers associated with
the packet.
Fixes: d9028db618a6 ("idpf: convert to libeth Tx buffer completion")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Madhu chittim <madhu.chittim@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In switchdev mode the uplink VSI should receive all unmatched packets,
including VLANs. Therefore, VLAN pruning should be disabled if uplink is
in switchdev mode. It is already being done in ice_eswitch_setup_env(),
however the addition of ice_up() in commit 44ba608db509 ("ice: do
switchdev slow-path Rx using PF VSI") caused VLAN pruning to be
re-enabled after disabling it.
Add a check to ice_set_vlan_filtering_features() to ensure VLAN
filtering will not be enabled if uplink is in switchdev mode. Note that
ice_is_eswitch_mode_switchdev() is being used instead of
ice_is_switchdev_running(), as the latter would only return true after
the whole switchdev setup completes.
Fixes: 44ba608db509 ("ice: do switchdev slow-path Rx using PF VSI")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Priya Singh <priyax.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Commit 608a5c05c39b ("virtchnl: support queue rate limit and quanta
size configuration") introduced new virtchnl ops:
- get_qos_caps
- cfg_q_bw
- cfg_q_quanta
New ops were added to ice_virtchnl_dflt_ops, in
commit 015307754a19 ("ice: Support VF queue rate limit and quanta
size configuration"), but not to the ice_virtchnl_repr_ops. Because
of that, if we get one of those messages in switchdev mode we end up
with NULL pointer dereference:
[ 1199.794701] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 1199.794804] Workqueue: ice ice_service_task [ice]
[ 1199.794878] RIP: 0010:0x0
[ 1199.795027] Call Trace:
[ 1199.795033] <TASK>
[ 1199.795039] ? __die+0x20/0x70
[ 1199.795051] ? page_fault_oops+0x140/0x520
[ 1199.795064] ? exc_page_fault+0x7e/0x270
[ 1199.795074] ? asm_exc_page_fault+0x22/0x30
[ 1199.795086] ice_vc_process_vf_msg+0x6e5/0xd30 [ice]
[ 1199.795165] __ice_clean_ctrlq+0x734/0x9d0 [ice]
[ 1199.795207] ice_service_task+0xccf/0x12b0 [ice]
[ 1199.795248] process_one_work+0x21a/0x620
[ 1199.795260] worker_thread+0x18d/0x330
[ 1199.795269] ? __pfx_worker_thread+0x10/0x10
[ 1199.795279] kthread+0xec/0x120
[ 1199.795288] ? __pfx_kthread+0x10/0x10
[ 1199.795296] ret_from_fork+0x2d/0x50
[ 1199.795305] ? __pfx_kthread+0x10/0x10
[ 1199.795312] ret_from_fork_asm+0x1a/0x30
[ 1199.795323] </TASK>
Fixes: 015307754a19 ("ice: Support VF queue rate limit and quanta size configuration")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix incorrect PHY timestamp extraction for ETH56G.
It's better to use FIELD_PREP() than manual shift.
Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Przemyslaw Korba <przemyslaw.korba@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
To check if PHY Clock Recovery mechanic is available for a device, there
is a need to verify if given PHY is available within the netlist, but the
netlist node type used for the search is wrong, also the search context
shall be specified.
Modify the search function to allow specifying the context in the
search.
Use the PHY node type instead of CLOCK CONTROLLER type, also use proper
search context which for PHY search is PORT, as defined in E810
Datasheet [1] ('3.3.8.2.4 Node Part Number and Node Options (0x0003)' and
'Table 3-105. Program Topology Device NVM Admin Command').
[1] https://cdrdv2.intel.com/v1/dl/getContent/613875?explicitVersion=true
Fixes: 91e43ca0090b ("ice: fix linking when CONFIG_PTP_1588_CLOCK=n")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Commit cdd30ebb1b9f ("module: Convert symbol namespace to string
literal") only converted MODULE_IMPORT_NS() and EXPORT_SYMBOL_NS(),
leaving DEFAULT_SYMBOL_NAMESPACE as a macro expansion.
This commit converts DEFAULT_SYMBOL_NAMESPACE in the same way to avoid
annoyance for the default namespace as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts the misconversions introduced by commit cdd30ebb1b9f
("module: Convert symbol namespace to string literal").
The affected descriptions refer to MODULE_IMPORT_NS() tags in general,
rather than suggesting the use of the empty string ("") as the
namespace.
Fixes: cdd30ebb1b9f ("module: Convert symbol namespace to string literal")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since commit cdd30ebb1b9f ("module: Convert symbol namespace to string
literal"), when MODULE_IMPORT_NS() is missing, 'make nsdeps' inserts
pointless code:
MODULE_IMPORT_NS("ns");
Here, "ns" is not a namespace, but the variable in the semantic patch.
It must not be quoted. Instead, a string literal must be passed to
Coccinelle.
Fixes: cdd30ebb1b9f ("module: Convert symbol namespace to string literal")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When we enable lockdep we get such a warning:
=============================
WARNING: suspicious RCU usage
6.12.0-rc7+ #1891 Tainted: G W
-----------------------------
arch/loongarch/kvm/../../../virt/kvm/kvm_main.c:5945 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by qemu-system-loo/948:
#0: 90000001184a00a8 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0xf4/0xe20 [kvm]
stack backtrace:
CPU: 2 UID: 0 PID: 948 Comm: qemu-system-loo Tainted: G W 6.12.0-rc7+ #1891
Tainted: [W]=WARN
Hardware name: Loongson Loongson-3A5000-7A1000-1w-CRB/Loongson-LS3A5000-7A1000-1w-CRB, BIOS vUDK2018-LoongArch-V2.0.0-prebeta9 10/21/2022
Stack : 0000000000000089 9000000005a0db9c 90000000071519c8 900000012c578000
900000012c57b940 0000000000000000 900000012c57b948 9000000007e53788
900000000815bcc8 900000000815bcc0 900000012c57b7b0 0000000000000001
0000000000000001 4b031894b9d6b725 0000000005dec000 9000000100427b00
00000000000003d2 0000000000000001 000000000000002d 0000000000000003
0000000000000030 00000000000003b4 0000000005dec000 0000000000000000
900000000806d000 9000000007e53788 00000000000000b4 0000000000000004
0000000000000004 0000000000000000 0000000000000000 9000000107baf600
9000000008916000 9000000007e53788 9000000005924778 000000001fe001e5
00000000000000b0 0000000000000007 0000000000000000 0000000000071c1d
...
Call Trace:
[<9000000005924778>] show_stack+0x38/0x180
[<90000000071519c4>] dump_stack_lvl+0x94/0xe4
[<90000000059eb754>] lockdep_rcu_suspicious+0x194/0x240
[<ffff80000221f47c>] kvm_io_bus_read+0x19c/0x1e0 [kvm]
[<ffff800002225118>] kvm_emu_mmio_read+0xd8/0x440 [kvm]
[<ffff8000022254bc>] kvm_handle_read_fault+0x3c/0xe0 [kvm]
[<ffff80000222b3c8>] kvm_handle_exit+0x228/0x480 [kvm]
Fix it by protecting kvm_io_bus_{read,write}() with SRCU.
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Blamed commit forgot to change hsr_init_skb() to allocate
larger skb for RedBox case.
Indeed, send_hsr_supervision_frame() will add
two additional components (struct hsr_sup_tlv
and struct hsr_sup_payload)
syzbot reported the following crash:
skbuff: skb_over_panic: text:ffffffff8afd4b0a len:34 put:6 head:ffff88802ad29e00 data:ffff88802ad29f22 tail:0x144 end:0x140 dev:gretap0
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:206 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 2 UID: 0 PID: 7611 Comm: syz-executor Not tainted 6.12.0-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:skb_panic+0x157/0x1d0 net/core/skbuff.c:206
Code: b6 04 01 84 c0 74 04 3c 03 7e 21 8b 4b 70 41 56 45 89 e8 48 c7 c7 a0 7d 9b 8c 41 57 56 48 89 ee 52 4c 89 e2 e8 9a 76 79 f8 90 <0f> 0b 4c 89 4c 24 10 48 89 54 24 08 48 89 34 24 e8 94 76 fb f8 4c
RSP: 0018:ffffc90000858ab8 EFLAGS: 00010282
RAX: 0000000000000087 RBX: ffff8880598c08c0 RCX: ffffffff816d3e69
RDX: 0000000000000000 RSI: ffffffff816de786 RDI: 0000000000000005
RBP: ffffffff8c9b91c0 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000302 R11: ffffffff961cc1d0 R12: ffffffff8afd4b0a
R13: 0000000000000006 R14: ffff88804b938130 R15: 0000000000000140
FS: 000055558a3d6500(0000) GS:ffff88806a800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1295974ff8 CR3: 000000002ab6e000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
skb_over_panic net/core/skbuff.c:211 [inline]
skb_put+0x174/0x1b0 net/core/skbuff.c:2617
send_hsr_supervision_frame+0x6fa/0x9e0 net/hsr/hsr_device.c:342
hsr_proxy_announce+0x1a3/0x4a0 net/hsr/hsr_device.c:436
call_timer_fn+0x1a0/0x610 kernel/time/timer.c:1794
expire_timers kernel/time/timer.c:1845 [inline]
__run_timers+0x6e8/0x930 kernel/time/timer.c:2419
__run_timer_base kernel/time/timer.c:2430 [inline]
__run_timer_base kernel/time/timer.c:2423 [inline]
run_timer_base+0x111/0x190 kernel/time/timer.c:2439
run_timer_softirq+0x1a/0x40 kernel/time/timer.c:2449
handle_softirqs+0x213/0x8f0 kernel/softirq.c:554
__do_softirq kernel/softirq.c:588 [inline]
invoke_softirq kernel/softirq.c:428 [inline]
__irq_exit_rcu kernel/softirq.c:637 [inline]
irq_exit_rcu+0xbb/0x120 kernel/softirq.c:649
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
sysvec_apic_timer_interrupt+0xa4/0xc0 arch/x86/kernel/apic/apic.c:1049
</IRQ>
Fixes: 5055cccfc2d1 ("net: hsr: Provide RedBox support (HSR-SAN)")
Reported-by: syzbot+7f4643b267cc680bfa1c@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Lukasz Majewski <lukma@denx.de>
Link: https://patch.msgid.link/20241202100558.507765-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
No need to check the argument of i2c_unregister_device() because the
function itself does it.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20241202082713.9719-1-wsa+renesas@sang-engineering.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently rtnl_link_get_net_ifla() gets called twice when we create
peer devices, once in rtnl_add_peer_net() and once in each ->newlink()
implementation.
This looks safer, however, it leads to a classic Time-of-Check to
Time-of-Use (TOCTOU) bug since IFLA_NET_NS_PID is very dynamic. And
because of the lack of checking error pointer of the second call, it
also leads to a kernel crash as reported by syzbot.
Fix this by getting rid of the second call, which already becomes
redudant after Kuniyuki's work. We have to propagate the result of the
first rtnl_link_get_net_ifla() down to each ->newlink().
Reported-by: syzbot+21ba4d5adff0b6a7cfc6@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=21ba4d5adff0b6a7cfc6
Fixes: 0eb87b02a705 ("veth: Set VETH_INFO_PEER to veth_link_ops.peer_type.")
Fixes: 6b84e558e95d ("vxcan: Set VXCAN_INFO_PEER to vxcan_link_ops.peer_type.")
Fixes: fefd5d082172 ("netkit: Set IFLA_NETKIT_PEER_INFO to netkit_link_ops.peer_type.")
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241129212519.825567-1-xiyou.wangcong@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 43645ce03e00 ("qed: Populate nvm image attribute shadow.")
added support for populating flash image attributes, notably
"num_images". However, some cards were not able to return this
information. In such cases, the driver would return EINVAL, causing the
driver to exit.
Add check to return EOPNOTSUPP instead of EINVAL when the card is not
able to return these information. The caller function already handles
EOPNOTSUPP without error.
Fixes: 43645ce03e00 ("qed: Populate nvm image attribute shadow.")
Co-developed-by: Florian Forestier <florian@forestier.re>
Signed-off-by: Florian Forestier <florian@forestier.re>
Signed-off-by: Louis Leseur <louis.leseur@gmail.com>
Link: https://patch.msgid.link/20241128083633.26431-1-louis.leseur@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Wen Gu says:
====================
two fixes for SMC
This patch set contains two bugfixes, to fix SMC warning and panic
issues in race conditions.
====================
Link: https://patch.msgid.link/20241127133014.100509-1-guwen@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
