| Age | Commit message (Collapse) | Author |
|---|
|
Two kfree_skb() calls must be replaced by consume_skb()
for skbs that are not technically dropped.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RFC 5082 IP_MINTTL option is rarely used on hosts.
Add a static key to remove from TCP fast path useless code,
and potential cache line miss to fetch inet_sk(sk)->min_ttl
Note that once ip4_min_ttl static key has been enabled,
it stays enabled until next boot.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No report yet from KCSAN, yet worth documenting the races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RFC 5082 IPV6_MINHOPCOUNT is rarely used on hosts.
Add a static key to remove from TCP fast path useless code,
and potential cache line miss to fetch tcp_inet6_sk(sk)->min_hopcount
Note that once ip6_min_hopcount static key has been enabled,
it stays enabled until next boot.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No report yet from KCSAN, yet worth documenting the races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sk->sk_rx_queue_mapping can be modified locklessly,
add a couple of READ_ONCE()/WRITE_ONCE() to document this fact.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sk_rx_queue_mapping is located in a cache line that should be kept read mostly.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sk_napi_id is located in a cache line that can be kept read mostly.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Increase cache locality by moving rx_dst_coookie next to sk->sk_rx_dst
This removes one or two cache line misses in IPv6 early demux (TCP/UDP)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Increase cache locality by moving rx_dst_ifindex next to sk->sk_rx_dst
This is part of an effort to reduce cache line misses in TCP fast path.
This removes one cache line miss in early demux.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rx_dropped, tx_dropped, rx_frame_errors and rx_crc_errors are being
wrongly fetched from the target container rather than source percpu
ones.
No idea if that goes from the vendor driver or was brainoed during
the refactoring, but fix it either way.
Fixes: a97c69ba4f30e ("net: ax88796c: ASIX AX88796C SPI Ethernet Adapter Driver")
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Link: https://lore.kernel.org/r/20211023121148.113466-1-alobakin@pm.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Quentin Monnet says:
====================
When listing BPF objects, bpftool can print a number of properties about
items holding references to these objects. For example, it can show pinned
paths for BPF programs, maps, and links; or programs and maps using a given
BTF object; or the names and PIDs of processes referencing BPF objects. To
collect this information, bpftool uses hash maps (to be clear: the data
structures, inside bpftool - we are not talking of BPF maps). It uses the
implementation available from the kernel, and picks it up from
tools/include/linux/hashtable.h.
This patchset converts bpftool's hash maps to a distinct implementation
instead, the one coming with libbpf. The main motivation for this change is
that it should ease the path towards a potential out-of-tree mirror for
bpftool, like the one libbpf already has. Although it's not perfect to
depend on libbpf's internal components, bpftool is intimately tied with the
library anyway, and this looks better than depending too much on (non-UAPI)
kernel headers.
The first two patches contain preparatory work on the Makefile and on the
initialisation of the hash maps for collecting pinned paths for objects.
Then the transition is split into several steps, one for each kind of
properties for which the collection is backed by hash maps.
v2:
- Move hashmap cleanup for pinned paths for links from do_detach() to
do_show().
- Handle errors on hashmap__append() (in three of the patches).
- Rename bpftool_hash_fn() and bpftool_equal_fn() as hash_fn_for_key_id()
and equal_fn_for_key_id(), respectively.
- Add curly braces for hashmap__for_each_key_entry() { } in
show_btf_plain() and show_btf_json(), where the flow was difficult to
read.
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
In order to show PIDs and names for processes holding references to BPF
programs, maps, links, or BTF objects, bpftool creates hash maps to
store all relevant information. This commit is part of a set that
transitions from the kernel's hash map implementation to the one coming
with libbpf.
The motivation is to make bpftool less dependent of kernel headers, to
ease the path to a potential out-of-tree mirror, like libbpf has.
This is the third and final step of the transition, in which we convert
the hash maps used for storing the information about the processes
holding references to BPF objects (programs, maps, links, BTF), and at
last we drop the inclusion of tools/include/linux/hashtable.h.
Note: Checkpatch complains about the use of __weak declarations, and the
missing empty lines after the bunch of empty function declarations when
compiling without the BPF skeletons (none of these were introduced in
this patch). We want to keep things as they are, and the reports should
be safe to ignore.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211023205154.6710-6-quentin@isovalent.com
|
|
In order to show BPF programs and maps using BTF objects when the latter
are being listed, bpftool creates hash maps to store all relevant items.
This commit is part of a set that transitions from the kernel's hash map
implementation to the one coming with libbpf.
The motivation is to make bpftool less dependent of kernel headers, to
ease the path to a potential out-of-tree mirror, like libbpf has.
This commit focuses on the two hash maps used by bpftool when listing
BTF objects to store references to programs and maps, and convert them
to the libbpf's implementation.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211023205154.6710-5-quentin@isovalent.com
|
|
In order to show pinned paths for BPF programs, maps, or links when
listing them with the "-f" option, bpftool creates hash maps to store
all relevant paths under the bpffs. So far, it would rely on the
kernel implementation (from tools/include/linux/hashtable.h).
We can make bpftool rely on libbpf's implementation instead. The
motivation is to make bpftool less dependent of kernel headers, to ease
the path to a potential out-of-tree mirror, like libbpf has.
This commit is the first step of the conversion: the hash maps for
pinned paths for programs, maps, and links are converted to libbpf's
hashmap.{c,h}. Other hash maps used for the PIDs of process holding
references to BPF objects are left unchanged for now. On the build side,
this requires adding a dependency to a second header internal to libbpf,
and making it a dependency for the bootstrap bpftool version as well.
The rest of the changes are a rather straightforward conversion.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211023205154.6710-4-quentin@isovalent.com
|
|
BPF programs, maps, and links, can all be listed with their pinned paths
by bpftool, when the "-f" option is provided. To do so, bpftool builds
hash maps containing all pinned paths for each kind of objects.
These three hash maps are always initialised in main.c, and exposed
through main.h. There appear to be no particular reason to do so: we can
just as well make them static to the files that need them (prog.c,
map.c, and link.c respectively), and initialise them only when we want
to show objects and the "-f" switch is provided.
This may prevent unnecessary memory allocations if the implementation of
the hash maps was to change in the future.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211023205154.6710-3-quentin@isovalent.com
|
|
The dependency is only useful to make sure that the $(LIBBPF_HDRS_DIR)
directory is created before we try to install locally the required
libbpf internal header. Let's create this directory properly instead.
This is in preparation of making $(LIBBPF_INTERNAL_HDRS) a dependency to
the bootstrap bpftool version, in which case we want no dependency on
$(LIBBPF).
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211023205154.6710-2-quentin@isovalent.com
|
|
Adding a configuration menu to hold many Intel pin control drivers
helps to make the display more concise.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Function tegra_pinctrl_gpio_request_enable() and
tegra_pinctrl_gpio_disable_free() uses pin offset instead
of group offset, causing the driver to use wrong offset
to enable gpio.
Add a helper function tegra_pinctrl_get_group() to parse the
pin group and determine correct offset.
Signed-off-by: Kartik K <kkartik@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Link: https://lore.kernel.org/r/20211025110959.27751-1-pshete@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Originally all DAX access when through block_device operations and thus
needed a queue reference. But since commit cccbce671582
("filesystem-dax: convert to dax_direct_access()") all this happens at
the DAX device level which uses its own refcounting. Having the external
refcount thus wasn't needed but has otherwise been harmless for long
time.
But now that "block: drain file system I/O on del_gendisk" waits for
q_usage_count to reach 0 in del_gendisk this whole scheme can't work
anymore (and pmem is the only driver abusing q_usage_count like that).
So switch to the internal reference and remove the unbalanced
blk_freeze_queue_start that is taken care of by del_gendisk.
Fixes: 8e141f9eb803 ("block: drain file system I/O on del_gendisk")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211019073641.2323410-2-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The __compiletime_strlen() macro expansion will shadow p_size and p_len
local variables. No callers currently use any of the shadowed names
for their "p" variable, so there are no code generation problems.
Add "__" prefixes to variable definitions __compiletime_strlen() to
avoid new W=2 warnings:
./include/linux/fortify-string.h: In function 'strnlen':
./include/linux/fortify-string.h:17:9: warning: declaration of 'p_size' shadows a previous local [-Wshadow]
17 | size_t p_size = __builtin_object_size(p, 1); \
| ^~~~~~
./include/linux/fortify-string.h:77:17: note: in expansion of macro '__compiletime_strlen'
77 | size_t p_len = __compiletime_strlen(p);
| ^~~~~~~~~~~~~~~~~~~~
./include/linux/fortify-string.h:76:9: note: shadowed declaration is here
76 | size_t p_size = __builtin_object_size(p, 1);
| ^~~~~~
Signed-off-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211025210528.261643-1-quic_qiancai@quicinc.com
|
|
Andrii Nakryiko says:
====================
Reduce amount of waiting time when running test_progs in parallel mode (-j) by
splitting bpf_verif_scale selftests into multiple tests. Previously it was
structured as a test with multiple subtests, but subtests are not easily
parallelizable with test_progs' infra. Also in practice each scale subtest is
really an independent test with nothing shared across all substest.
This patch set changes how test_progs test discovery works. Now it is possible
to define multiple tests within a single source code file. One of the patches
also marks tc_redirect selftests as serial, because it's extremely harmful to
the test system when run in parallel mode.
====================
Acked-by: Yucong Sun <sunyucong@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Instead of using subtests in bpf_verif_scale selftest, turn each scale
sub-test into its own test. Each subtest is compltely independent and
just reuses a bit of common test running logic, so the conversion is
trivial. For convenience, keep all of BPF verifier scale tests in one
file.
This conversion shaves off a significant amount of time when running
test_progs in parallel mode. E.g., just running scale tests (-t verif_scale):
BEFORE
======
Summary: 24/0 PASSED, 0 SKIPPED, 0 FAILED
real 0m22.894s
user 0m0.012s
sys 0m22.797s
AFTER
=====
Summary: 24/0 PASSED, 0 SKIPPED, 0 FAILED
real 0m12.044s
user 0m0.024s
sys 0m27.869s
Ten second saving right there. test_progs -j is not yet ready to be
turned on by default, unfortunately, and some tests fail almost every
time, but this is a good improvement nevertheless. Ignoring few
failures, here is sequential vs parallel run times when running all
tests now:
SEQUENTIAL
==========
Summary: 206/953 PASSED, 4 SKIPPED, 0 FAILED
real 1m5.625s
user 0m4.211s
sys 0m31.650s
PARALLEL
========
Summary: 204/952 PASSED, 4 SKIPPED, 2 FAILED
real 0m35.550s
user 0m4.998s
sys 0m39.890s
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211022223228.99920-5-andrii@kernel.org
|
|
It seems to cause a lot of harm to kprobe/tracepoint selftests. Yucong
mentioned before that it does manipulate sysfs, which might be the
reason. So let's mark it as serial, though ideally it would be less
intrusive on the system at test.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211022223228.99920-4-andrii@kernel.org
|
|
Revamp how test discovery works for test_progs and allow multiple test
entries per file. Any global void function with no arguments and
serial_test_ or test_ prefix is considered a test.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211022223228.99920-3-andrii@kernel.org
|
|
Ensure that all test entry points are global void functions with no
input arguments. Mark few subtest entry points as static.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211022223228.99920-2-andrii@kernel.org
|
|
Add SF device add and delete specific trace points.
echo mlx5:mlx5_sf_dev_add >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_dev_del >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_vhca_event >> /sys/kernel/debug/tracing/set_event
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add support for trace events for SFs to improve debugging.
This covers
(a) port add and free trace points
(b) device level trace points
(c) SF hardware context add, free trace points.
(d) SF function activate/deacticate and state trace points
SF events examples:
echo mlx5:mlx5_sf_add >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_free >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_hwc_alloc >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_hwc_free >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_hwc_deferred_free >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_update_state >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_activate >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_deactivate >> /sys/kernel/debug/tracing/set_event
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently, max_macs is taking 70Kbytes of memory per function. This
size is not needed in all use cases, and is critical with large scale.
Hence, allow user to configure the number of max_macs.
For example, to reduce the number of max_macs to 1, execute::
$ devlink dev param set pci/0000:00:0b.0 name max_macs value 1 \
cmode driverinit
$ devlink dev reload pci/0000:00:0b.0
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Event EQ is an EQ which received the notification of almost all the
events generated by the NIC.
Currently, each event EQ is taking 512KB of memory. This size is not
needed in most use cases, and is critical with large scale. Hence,
allow user to configure the size of the event EQ.
For example to reduce event EQ size to 64, execute::
$ devlink resource set pci/0000:00:0b.0 path /event_eq_size/ size 64
$ devlink dev reload pci/0000:00:0b.0
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently, each I/O EQ is taking 128KB of memory. This size
is not needed in all use cases, and is critical with large scale.
Hence, allow user to configure the size of I/O EQs.
For example, to reduce I/O EQ size to 64, execute:
$ devlink resource set pci/0000:00:0b.0 path /io_eq_size/ size 64
$ devlink dev reload pci/0000:00:0b.0
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The SWITCHDEV_FDB_ADD_TO_DEVICE is used for both adding new and replacing
existing entry. Implement support for replacing existing FDB entries in
mlx5 offload code.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Following two patterns in bridge code are used in multiple places where
similar code is duplicated:
- Lookup FDB entry from hashtable by address+vid pair.
- Notify software bridge and then delete existing FDB entry.
In order to improve code quality and prepare for following patch series
that also uses described patterns, extract the codes to dedicated helper
functions.
This commit doesn't change functionality.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Firmware logs its asserts also to non-volatile memory. In order to
reduce drift between the NIC and the host, the driver sets the host
epoch-time to the firmware every hour.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add log macro which gets log level as a parameter. Use the severity
read from the health buffer and the new log macro to log the health buffer
with severity as log level. Prior to this patch, health buffer was
printed in error log level regardless of its severity. Now the user may
filter dmesg (--level) or change kernel log level to focus on different
severity levels of firmware errors.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Enhance health buffer to include:
- assert_var5: expose the 6'th assert variable.
- time: error's time-stamp in seconds (epoch time).
- rfr: Recovery Flow Requiered. When set, indicates that the error
cannot be recovered without flow involving reset.
- severity: error's severity value, ranging from emergency to debug.
Expose them in the health buffer dump (dmesg and devlink fw reporter).
Health buffer in dmesg:
mlx5_core 0000:08:00.0: print_health_info:425:(pid 912): Health issue observed, firmware internal error, severity(3) ERROR:
mlx5_core 0000:08:00.0: print_health_info:429:(pid 912): assert_var[0] 0x08040700
mlx5_core 0000:08:00.0: print_health_info:429:(pid 912): assert_var[1] 0x00000000
mlx5_core 0000:08:00.0: print_health_info:429:(pid 912): assert_var[2] 0x00000000
mlx5_core 0000:08:00.0: print_health_info:429:(pid 912): assert_var[3] 0x00000000
mlx5_core 0000:08:00.0: print_health_info:429:(pid 912): assert_var[4] 0x00000000
mlx5_core 0000:08:00.0: print_health_info:429:(pid 912): assert_var[5] 0x00000000
mlx5_core 0000:08:00.0: print_health_info:432:(pid 912): assert_exit_ptr 0x00aaf800
mlx5_core 0000:08:00.0: print_health_info:434:(pid 912): assert_callra 0x00aaf70c
mlx5_core 0000:08:00.0: print_health_info:436:(pid 912): fw_ver 16.32.492
mlx5_core 0000:08:00.0: print_health_info:437:(pid 912): time 1634819758
mlx5_core 0000:08:00.0: print_health_info:438:(pid 912): hw_id 0x0000020d
mlx5_core 0000:08:00.0: print_health_info:439:(pid 912): rfr 0
mlx5_core 0000:08:00.0: print_health_info:440:(pid 912): severity 3 (ERROR)
mlx5_core 0000:08:00.0: print_health_info:441:(pid 912): irisc_index 9
mlx5_core 0000:08:00.0: print_health_info:442:(pid 912): synd 0x1: firmware internal error
mlx5_core 0000:08:00.0: print_health_info:444:(pid 912): ext_synd 0x802b
mlx5_core 0000:08:00.0: print_health_info:445:(pid 912): raw fw_ver 0x102001ec
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently, the flow counters bulk query buffer takes a little more than
512KB of memory, which is aligned to the next power of 2, to 1MB.
The buffer size determines the maximum number of flow counters that can
be queried at a time. Thus, having a bigger buffer can improve
performance for users that need to query many flow counters.
SFs don't use many flow counters and don't need a big buffer. Since this
size is critical with large scale, reduce the size of the bulk query
buffer for SFs.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The cited commit is causing unused-function warning[1] when
CONFIG_MLX5_EN_RXNFC is not set.
Fix this by moving the function into the ifdef, where it's only used
[1]
warning: ‘mlx5i_flow_type_mask’ defined but not used [-Wunused-function]
Fixes: 9fbe1c25ecca ("net/mlx5i: Enable Rx steering for IPoIB via ethtool")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
After previous changes, caller (mlx5e_tc_offload_fdb_rules()) already
checks for the slow path flag, and if set won't call offload/unoffload
sample.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Use a local buffer and eth_hw_addr_set()
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
PTP is currently only supported on E810 devices, it is checked
in ice_ptp_init(). However, there is no check in ice_ptp_release().
For other E800 series devices, ice_ptp_release() will be wrongly executed.
Fix the following calltrace.
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
Workqueue: ice ice_service_task [ice]
Call Trace:
dump_stack_lvl+0x5b/0x82
dump_stack+0x10/0x12
register_lock_class+0x495/0x4a0
? find_held_lock+0x3c/0xb0
__lock_acquire+0x71/0x1830
lock_acquire+0x1e6/0x330
? ice_ptp_release+0x3c/0x1e0 [ice]
? _raw_spin_lock+0x19/0x70
? ice_ptp_release+0x3c/0x1e0 [ice]
_raw_spin_lock+0x38/0x70
? ice_ptp_release+0x3c/0x1e0 [ice]
ice_ptp_release+0x3c/0x1e0 [ice]
ice_prepare_for_reset+0xcb/0xe0 [ice]
ice_do_reset+0x38/0x110 [ice]
ice_service_task+0x138/0xf10 [ice]
? __this_cpu_preempt_check+0x13/0x20
process_one_work+0x26a/0x650
worker_thread+0x3f/0x3b0
? __kthread_parkme+0x51/0xb0
? process_one_work+0x650/0x650
kthread+0x161/0x190
? set_kthread_struct+0x40/0x40
ret_from_fork+0x1f/0x30
Fixes: 4dd0d5c33c3e ("ice: add lock around Tx timestamp tracker flush")
Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When the PF is a member of a link aggregate, and the driver
is removed, the process will hang unless we respond to the
NETDEV_UNREGISTER event that is sent to the event_handler
for LAG.
Add a case statement for the ice_lag_event_handler to unlink
the PF from the link aggregate.
Also remove code that was incorrectly applying a dev_hold to
peer_netdevs that were associated with the ice driver.
Fixes: df006dd4b1dc ("ice: Add initial support framework for LAG")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
sm8250 target"
This reverts commit 001ce9785c0674d913531345e86222c965fc8bf4.
This upstream commit broke AOSP (post Android 12 merge) build
on RB5. The device either silently crashes into USB crash mode
after android boot animation or we see a blank blue screen
with following dpu errors in dmesg:
[ T444] hw recovery is not complete for ctl:3
[ T444] [drm:dpu_encoder_phys_vid_prepare_for_kickoff:539] [dpu error]enc31 intf1 ctl 3 reset failure: -22
[ T444] [drm:dpu_encoder_phys_vid_wait_for_commit_done:513] [dpu error]vblank timeout
[ T444] [drm:dpu_kms_wait_for_commit_done:454] [dpu error]wait for commit done returned -110
[ C7] [drm:dpu_encoder_frame_done_timeout:2127] [dpu error]enc31 frame done timeout
[ T444] [drm:dpu_encoder_phys_vid_wait_for_commit_done:513] [dpu error]vblank timeout
[ T444] [drm:dpu_kms_wait_for_commit_done:454] [dpu error]wait for commit done returned -110
Fixes: 001ce9785c06 ("arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target")
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211014135410.4136412-1-dmitry.baryshkov@linaro.org
|
|
The introduction of __qcom_scm_set_boot_addr_mc() relies on
cpu_logical_map() and MPIDR_AFFINITY_LEVEL() from smp_plat.h, but only
ARM and ARM64 has this include file, so the introduction of this
dependency broke compile testing on e.g. x86_64.
Make the inclusion of smp_plat.h and the affected function depend on
ARM || ARM64 to allow the code to still be compiled.
Fixes: 55845f46df03 ("firmware: qcom: scm: Add support for MC boot address API")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211025025816.2937465-1-bjorn.andersson@linaro.org
|
|
Currently we use fixed size u16 bitmap for subpage bitmap. This is fine
for 4K sectorsize with 64K page size.
But for 4K sectorsize and larger page size, the bitmap is too small,
while for smaller page size like 16K, u16 bitmaps waste too much space.
Here we introduce a new helper structure, btrfs_subpage_bitmap_info, to
record the proper bitmap size, and where each bitmap should start at.
By this, we can later compact all subpage bitmaps into one u32 bitmap.
This patch is the first step.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The existing calling convention of btrfs_alloc_subpage() is pretty
awful. Change it to a more common pattern by returning struct
btrfs_subpage directly and let the caller to determine if the call
succeeded.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
than PAGE_SIZE
There are two call sites of btrfs_alloc_subpage():
- btrfs_attach_subpage()
We have ensured sectorsize is smaller than PAGE_SIZE
- alloc_extent_buffer()
We call btrfs_alloc_subpage() unconditionally.
The alloc_extent_buffer() forces us to check the sectorsize size against
page size inside btrfs_alloc_subpage().
Since the function name, btrfs_alloc_subpage(), already indicates it
should only get called for subpage cases, do the check in
alloc_extent_buffer() and add an ASSERT() in btrfs_alloc_subpage().
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Update it since commit 944d3f9fac61 ("btrfs: switch seed device to
list api") did conversion from fs_devices::seed to fs_devices::seed_list.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Su Yue <l@damenly.su>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is no need for the variable ret after d66105cfa873 ("btrfs:
allocate btrfs_ioctl_quota_rescan_args on stack"), remove it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The out label is being overused, we can simply return if the condition
permits.
No functional changes.
Reviewed-by: Su Yue <l@damenly.su>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
