summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix packet header offset calculation in _decode_session6(), from Hajime Tazaki. 2) Fix route leak in error paths of xfrm_lookup(), from Huaibin Wang. 3) Be sure to clear state properly when scans fail in iwlwifi mvm code, from Luciano Coelho. 4) iwlwifi tries to stop scans that aren't actually running, also from Luciano Coelho. 5) mac80211 should drop mesh frames that are not encrypted, fix from Bob Copeland. 6) Add new device ID to b43 wireless driver for BCM432228 chips, from Rafał Miłecki. 7) Fix accidental addition of members after variable sized array in struct tc_u_hnode, from WANG Cong. 8) Don't re-enable interrupts until after we call napi_complete() in ibmveth and WIZnet drivers, frm Yongbae Park. 9) Fix regression in vlan tag handling of fec driver, from Fugang Duan. 10) If a network namespace change fails during rtnl_newlink(), we don't unwind the device registry properly. 11) Fix two TCP regressions, from Neal Cardwell: - Don't allow snd_cwnd_cnt to accumulate huge values due to missing test in tcp_cong_avoid_ai(). - Restore CUBIC back to advancing cwnd by 1.5x packets per RTT. 12) Fix performance regression in xne-netback involving push TX notifications, from David Vrabel. 13) __skb_tstamp_tx() can be called with a NULL sk pointer, do not dereference blindly. From Willem de Bruijn. 14) Fix potential stack overflow in RDS protocol stack, from Arnd Bergmann. 15) VXLAN_VID_MASK used incorrectly in new remote checksum offload support of VXLAN driver. Fix from Alexey Kodanev. 16) Fix too small netlink SKB allocation in inet_diag layer, from Eric Dumazet. 17) ieee80211_check_combinations() does not count interfaces correctly, from Andrei Otcheretianski. 18) Hardware feature determination in bxn2x driver references a piece of software state that actually isn't initialized yet, fix from Michal Schmidt. 19) inet_csk_wait_for_connect() needs a sched_annotate_sleep() annoation, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits) Revert "net: cx82310_eth: use common match macro" net/mlx4_en: Set statistics bitmap at port init IB/mlx4: Saturate RoCE port PMA counters in case of overflow net/mlx4_en: Fix off-by-one in ethtool statistics display IB/mlx4: Verify net device validity on port change event act_bpf: allow non-default TC_ACT opcodes as BPF exec outcome Revert "smc91x: retrieve IRQ and trigger flags in a modern way" inet: Clean up inet_csk_wait_for_connect() vs. might_sleep() ip6_tunnel: fix error code when tunnel exists netdevice.h: fix ndo_bridge_* comments bnx2x: fix encapsulation features on 57710/57711 mac80211: ignore CSA to same channel nl80211: ignore HT/VHT capabilities without QoS/WMM mac80211: ask for ECSA IE to be considered for beacon parse CRC mac80211: count interfaces correctly for combination checks isdn: icn: use strlcpy() when parsing setup options rxrpc: bogus MSG_PEEK test in rxrpc_recvmsg() caif: fix MSG_OOB test in caif_seqpkt_recvmsg() bridge: reset bridge mtu after deleting an interface can: kvaser_usb: Fix tx queue start/stop race conditions ...
2015-03-19ata: Add a new flag to destinguish sas controllerShaohua Li
SAS controller has its own tag allocation, which doesn't directly match to ATA tag, so SAS and SATA have different code path for ata tags. Originally we use port->scsi_host (98bd4be1) to destinguish SAS controller, but libsas set ->scsi_host too, so we can't use it for the destinguish, we add a new flag for this purpose. Without this patch, the following oops can happen because scsi-mq uses a host-wide tag map shared among all devices with some integer tag values >= ATA_MAX_QUEUE. These unexpectedly high tag values cause __ata_qc_from_tag() to return NULL, which is then dereferenced in ata_qc_new_init(). BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 IP: [<ffffffff804fd46e>] ata_qc_new_init+0x3e/0x120 PGD 32adf0067 PUD 32adf1067 PMD 0 Oops: 0002 [#1] SMP DEBUG_PAGEALLOC Modules linked in: iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi igb i2c_algo_bit ptp pps_core pm80xx libsas scsi_transport_sas sg coretemp eeprom w83795 i2c_i801 CPU: 4 PID: 1450 Comm: cydiskbench Not tainted 4.0.0-rc3 #1 Hardware name: Supermicro X8DTH-i/6/iF/6F/X8DTH, BIOS 2.1b 05/04/12 task: ffff8800ba86d500 ti: ffff88032a064000 task.ti: ffff88032a064000 RIP: 0010:[<ffffffff804fd46e>] [<ffffffff804fd46e>] ata_qc_new_init+0x3e/0x120 RSP: 0018:ffff88032a067858 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff8800ba0d2230 RCX: 000000000000002a RDX: ffffffff80505ae0 RSI: 0000000000000020 RDI: ffff8800ba0d2230 RBP: ffff88032a067868 R08: 0000000000000201 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800ba0d0000 R13: ffff8800ba0d2230 R14: ffffffff80505ae0 R15: ffff8800ba0d0000 FS: 0000000041223950(0063) GS:ffff88033e480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000058 CR3: 000000032a0a3000 CR4: 00000000000006e0 Stack: ffff880329eee758 ffff880329eee758 ffff88032a0678a8 ffffffff80502dad ffff8800ba167978 ffff880329eee758 ffff88032bf9c520 ffff8800ba167978 ffff88032bf9c520 ffff88032bf9a290 ffff88032a0678b8 ffffffff80506909 Call Trace: [<ffffffff80502dad>] ata_scsi_translate+0x3d/0x1b0 [<ffffffff80506909>] ata_sas_queuecmd+0x149/0x2a0 [<ffffffffa0046650>] sas_queuecommand+0xa0/0x1f0 [libsas] [<ffffffff804ea544>] scsi_dispatch_cmd+0xd4/0x1a0 [<ffffffff804eb50f>] scsi_queue_rq+0x66f/0x7f0 [<ffffffff803e5098>] __blk_mq_run_hw_queue+0x208/0x3f0 [<ffffffff803e54b8>] blk_mq_run_hw_queue+0x88/0xc0 [<ffffffff803e5c74>] blk_mq_insert_request+0xc4/0x130 [<ffffffff803e0b63>] blk_execute_rq_nowait+0x73/0x160 [<ffffffffa0023fca>] sg_common_write+0x3da/0x720 [sg] [<ffffffffa0025100>] sg_new_write+0x250/0x360 [sg] [<ffffffffa0025feb>] sg_write+0x13b/0x450 [sg] [<ffffffff8032ec91>] vfs_write+0xd1/0x1b0 [<ffffffff8032ee54>] SyS_write+0x54/0xc0 [<ffffffff80689932>] system_call_fastpath+0x12/0x17 tj: updated description. Fixes: 12cb5ce101ab ("libata: use blk taging") Reported-and-tested-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-19Merge branch 'tipc-next'David S. Miller
Erik Hugne says: ==================== tipc: small bugfix an support for datagram connect() Most notable in this series is patch#3 that allows programs to associate a tipc address with a connectionless (RDM/DGRAM) socket. v2: Fix indent issue in patch#3 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-19tipc: add support for connect() on dgram/rdm socketsErik Hugne
Following the example of ip4_datagram_connect, we store the address in the socket structure for dgram/rdm sockets and use that as the default destination for subsequent send() calls. It is allowed to connect to any address types, and the behaviour of send() will be the same as a normal sendto() with this address provided. Binding to an AF_UNSPEC address clears the association. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-19tipc: do not report -EHOSTUNREACH for failed local deliveryErik Hugne
Since commit 1186adf7df04 ("tipc: simplify message forwarding and rejection in socket layer") -EHOSTUNREACH is propagated back to the sending process if we fail to deliver the message to another socket local to the node. This is wrong, host unreachable should only be reported when the destination port/name does not exist in the cluster, and that check is always done before sending the message. Also, this introduces inconsistent sendmsg() behavior for local/remote destinations. Errors occurring on the receiving side should not trickle up to the sender. If message delivery fails TIPC should either discard the packet or reject it back to the sender based on the destination droppable option. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-19tipc: remove redundant call to tipc_node_remove_connErik Hugne
tipc_node_remove_conn may be called twice if shutdown() is called on a socket that have messages in the receive queue. Calling this function twice does no harm, but is unnecessary and we remove the redundant call. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-19selftests: Fix build failures when invoked from kselftest targetShuah Khan
Several tests that rely on implicit build rules fail to build, when invoked from the main Makefile kselftest target. These failures are due to --no-builtin-rules and --no-builtin-variables options set in the inherited MAKEFLAGS. --no-builtin-rules eliminates the use of built-in implicit rules and --no-builtin-variables is for not defining built-in variables. These two options override the use of implicit rules resulting in build failures. In addition, inherited LDFLAGS result in build failures and there is no need to define LDFLAGS. Clear LDFLAGS and MAKEFLAG when make is invoked from the main Makefile kselftest target. Fixing this at selftests Makefile avoids changing the main Makefile and keeps this change self contained at selftests level. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-19ARM: socfpga: dts: fix spi1 interruptMark James
The socfpga.dtsi currently has the wrong interrupt number set for SPI master 1 Trying to use the master without this change results in the kernel boot process waiting forever for an interrupt that will never occur while attempting to probe any slave devices configured in the device tree as being under SPI master 1. The change works for the Cyclone V, and according to the Arria 5 handbook should be good there too. Signed-off-by: Mark James <maj@jamers.net> Acked-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-03-19mac802154: fix typo in header guardNicolas Iooss
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Fixes: b6eea9ca354a ("mac802154: introduce driver-ops header") Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-19fuse: explicitly set /dev/fuse file's private_dataTom Van Braeckel
The misc subsystem (which is used for /dev/fuse) initializes private_data to point to the misc device when a driver has registered a custom open file operation, and initializes it to NULL when a custom open file operation has *not* been provided. This subtle quirk is confusing, to the point where kernel code registers *empty* file open operations to have private_data point to the misc device structure. And it leads to bugs, where the addition or removal of a custom open file operation surprisingly changes the initial contents of a file's private_data structure. So to simplify things in the misc subsystem, a patch [1] has been proposed to *always* set the private_data to point to the misc device, instead of only doing this when a custom open file operation has been registered. But before this patch can be applied we need to modify drivers that make the assumption that a misc device file's private_data is initialized to NULL because they didn't register a custom open file operation, so they don't rely on this assumption anymore. FUSE uses private_data to store the fuse_conn and errors out if this is not initialized to NULL at mount time. Hence, we now set a file's private_data to NULL explicitly, to be independent of whatever value the misc subsystem initializes it to by default. [1] https://lkml.org/lkml/2014/12/4/939 Reported-by: Giedrius Statkevicius <giedriuswork@gmail.com> Reported-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Tom Van Braeckel <tomvanbraeckel@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2015-03-19Revert "of: Fix premature bootconsole disable with 'stdout-path'"Peter Hurley
This reverts commit 2fa645cb2703d9b3786d850db815414dfeefa51d. The assumption that at least 1 preferred console will be registered when the stdout-path property is set is invalid, which can result in _no_ consoles. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Rob Herring <robh@kernel.org>
2015-03-19iwlwifi: mvm: remove WARN_ON for invalid BA notificationJohannes Berg
The firmware frequently manages to trigger this, and there's no known driver workaround, so stop warning. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-19of: handle both '/' and ':' in path stringsBrian Norris
Commit 106937e8ccdc ("of: fix handling of '/' in options for of_find_node_by_path()") caused a regression in OF handling of stdout-path. While it fixes some cases which have '/' after the ':', it breaks cases where there is more than one '/' *before* the ':'. For example, it breaks this boot string stdout-path = "/rdb/serial@f040ab00:115200"; So rather than doing sequentialized checks (first for '/', then for ':'; or vice versa), to get the correct behavior we need to check for the first occurrence of either one of them. It so happens that the handy strcspn() helper can do just that. Fixes: 106937e8ccdc ("of: fix handling of '/' in options for of_find_node_by_path()") Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: stable@vger.kernel.org # 3.19 Acked-by: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
2015-03-19of: unittest: Add option string test case with longer pathBrian Norris
There were regressions seen with commit 106937e8ccdc ("of: fix handling of '/' in options for of_find_node_by_path()"), where we couldn't handle extra '/' before the ':'. Let's test for this now. Confirmed that this test fails without the previous patch and passes when patched. All other tests pass. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
2015-03-19of/irq: Fix of_irq_parse_one() returned error codesLaurent Pinchart
The error code paths that require cleanup use a goto to jump to the cleanup code and return an error code. However, the error code variable res, which is initialized to -EINVAL when declared, is then overwritten with the return value of of_parse_phandle_with_args(), and reused as the return code from of_irq_parse_one(). This leads to an undetermined error being returned instead of the expected -EINVAL value. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: stable@vger.kernel.org # 3.13+ Signed-off-by: Rob Herring <robh@kernel.org>
2015-03-19iwlwifi: add new 3165 series PCI IDsOren Givon
Add new 3165 PCI IDs for new 1x1 cards. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-19iwlwifi: mvm: protect rate scaling against non-mvm IBSS stationsJohannes Berg
When the driver callback returns that it's out of space for new stations, the mac80211 IBSS code still keeps the station so it doesn't try to add it over and over again. Since the rate scaling algorithm is separate in mac80211, it also invokes the rate scaling algorithm for such stations. It doesn't know that our rate scaling algorithm is tightly integrated with the MVM code and relies on those data structures, and it cannot as the abstraction doesn't allow for it. This leads to crashes when the rate scaling algorithm tries to use uninitialized data, notably the mvmsta->vif pointer. Protect against this in the rate scaling algorithm. We cannot get good rates with such peers anyway since the firmware cannot do anything with them. This should fix https://bugzilla.kernel.org/show_bug.cgi?id=93461 CC: <stable@vger.kernel.org> Reported-by: Richard Taylor <rjt-kernel@thegrindstone.me.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-19iwlwifi: dvm: run INIT firmware again upon .start()Emmanuel Grumbach
The assumption before this patch was that we don't need to run again the INIT firmware after the system booted. The INIT firmware runs calibrations which impact the physical layer's behavior. Users reported that it may be helpful to run these calibrations again every time the interface is brought up. The penatly is minimal, since the calibrations run fast. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=94341 CC: <stable@vger.kernel.org> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-19mmc: pwrseq_simple: fix error path in mmc_pwrseq_simple_allocNeilBrown
The current error-path code (when gpiod_get_index() reports an error) can never free pwrseq->reset_gpios[0], but might try to tree pwrseq->reset_gpios[-1], which has unfortunate consequences. Signed-off-by: NeilBrown <neil@brown.name> Fixes: 934f1f48330ed695927a51fa068dc5d673f2da19 Acked-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
2015-03-19netfilter: restore rule tracing via nfnetlink_logPablo Neira Ayuso
Since fab4085 ("netfilter: log: nf_log_packet() as real unified interface"), the loginfo structure that is passed to nf_log_packet() is used to explicitly indicate the logger type you want to use. This is a problem for people tracing rules through nfnetlink_log since packets are always routed to the NF_LOG_TYPE logger after the aforementioned patch. We can fix this by removing the trace loginfo structures, but that still changes the log level from 4 to 5 for tracing messages and there may be someone relying on this outthere. So let's just introduce a new nf_log_trace() function that restores the former behaviour. Reported-by: Markus Kötter <koetter@rrzn.uni-hannover.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-03-19gpiolib: translate pin number in GPIO ACPI callbacksqipeng.zha
If GPIO driver use pin mapping, need to translate pin number between ACPI table and GPIO driver. This issue is found on one platform with Cherryview gpio controller, kernel is hang when executed _PS0 method of one ACPI device, since without this translation, it access invalid gpiodesc array. Verified it works again with this patch. Signed-off-by: qipeng.zha <qipeng.zha@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-19Merge branch 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes single radeon fix. * 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: drop ttm two ended allocation
2015-03-19Merge branch 'exynos-drm-fixes' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Some urgent regression fixes to booting failures Exynos DRM occured. Summary: - Fix two urgent null pointer dereference bugs in case of enabling or disabling IOMMU. There was two cases to these issues. One is that plane->crtc is accessed by exynos_disable_plane() when device tree binding is broken so device driver tries to release, which means that the mode set operation isn't invoked yet so plane->crtc is still NULL and exynos_disable_plane() will access NULL pointer. This issue is fixed by checking if the plane->crtc is NULL or not in exynos_disable_plane() Other is that fimd_wait_for_vblank() is called to avoid from page fault with IOMMU before the ctx object is created. At this time, fimd_wait_for_vblank() tries to access ctx->crtc but the ctx->crtc is still NULL because exynos_drm_crtc_create() isn't called yet. This issue is fixed by creating a crtc object and setting it to ctx->crtc prior to fimd_wait_for_vblank() call. For more details, you can refer to below an e-mail thread, http://www.spinics.net/lists/linux-samsung-soc/msg42436.html - Remove unnecessary file not used and fix trivial issues. * 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: fix the initialization order in FIMD drm/exynos: fix typo config name correctly. drm/exynos: Check for NULL dereference of crtc drm/exynos: IS_ERR() vs NULL bug drm/exynos: remove unused files
2015-03-18ide_tape: convert jiffies with jiffies_to_msecsNicholas Mc Guire
Use jiffies_to_msecs for converting jiffies as it handles all of the corner cases reliably and also helps readability. The printk format is fixed up as jiffies_to_msecs returns unsigned int not unsigned long. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18net/mlx4_en: mlx4_en_set_tx_maxrate() can be staticWu Fengguang
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18bridge: add ageing_time, stp_state, priority over netlinkJörg Thalheim
Signed-off-by: Jörg Thalheim <joerg@higgsboson.tk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18net: Fix high overhead of vlan sub-device teardown.David S. Miller
When a networking device is taken down that has a non-trivial number of VLAN devices configured under it, we eat a full synchronize_net() for every such VLAN device. This is because of the call chain: NETDEV_DOWN notifier --> vlan_device_event() --> dev_change_flags() --> __dev_change_flags() --> __dev_close() --> __dev_close_many() --> dev_deactivate_many() --> synchronize_net() This is kind of rediculous because we already have infrastructure for batching doing operation X to a list of net devices so that we only incur one sync. So make use of that by exporting dev_close_many() and adjusting it's interfaace so that the caller can fully manage the batch list. Use this in vlan_device_event() and all the overhead goes away. Reported-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18inet: add a schedule point in inet_twsk_purge()Eric Dumazet
On a large hash table, we can easily spend seconds to walk over all entries. Add a cond_resched() to yield cpu if necessary. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18Revert "net: cx82310_eth: use common match macro"Ondrej Zary
This reverts commit 11ad714b98f6d9ca0067568442afe3e70eb94845 because it breaks cx82310_eth. The custom USB_DEVICE_CLASS macro matches bDeviceClass, bDeviceSubClass and bDeviceProtocol but the common USB_DEVICE_AND_INTERFACE_INFO matches bInterfaceClass, bInterfaceSubClass and bInterfaceProtocol instead, which are not specified. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18rocker: add support for phys_port_nameDavid Ahern
Implement the phys_port_name operation. Port names are pulled from the rocker hardware model in qemu and default to the qemu name + port id. e.g., sw1p1: flags=4098<BROADCAST,MULTICAST> mtu 1500 ether 52:54:00:12:35:01 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 where 'sw1' comes from the qemu command line -device rocker,name=sw1, and 'p1' is port 1. Patch is adapted from Scott's phys_port_id patch. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18net: add support for phys_port_nameDavid Ahern
Similar to port id allow netdevices to specify port names and export the name via sysfs. Drivers can implement the netdevice operation to assist udev in having sane default names for the devices using the rule: $ cat /etc/udev/rules.d/80-net-setup-link.rules SUBSYSTEM=="net", ACTION=="add", ATTR{phys_port_name}!="", NAME="$attr{phys_port_name}" Use of phys_name versus phys_id was suggested-by Jiri Pirko. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18sparc: Fix /proc/kcoreDavid S. Miller
/proc/kcore investigates the "System RAM" elements in /proc/iomem to initialize it's memory tables. Therefore we have to register them before it tries to do so. kcore uses device_initcall() so let's use arch_initcall() for the registry. Also we need ARCH_PROC_KCORE_TEXT to get the virtual addresses of the kernel image correct. Reported-by: David Ahern <david.ahern@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18vxlan: Move socket initialization to within rtnl scopeMarcelo Ricardo Leitner
Currently, if a multicast join operation fail, the vxlan interface will be UP but not functional, without even a log message informing the user. Now that we can grab socket lock after already having rntl, we don't need to defer socket creation and multicast operations. By not deferring we can do proper error reporting to the user through ip exit code. This patch thus removes all deferred work that vxlan had and put it back inline. Now the socket will only be created, bound and join multicast group when one bring the interface up, and will undo all that as soon as one put the interface down. As vxlan_sock_hold() is not used after this patch, it was removed too. Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18ipv4, ipv6: kill ip_mc_{join, leave}_group and ipv6_sock_mc_{join, drop}Marcelo Ricardo Leitner
in favor of their inner __ ones, which doesn't grab rtnl. As these functions need to operate on a locked socket, we can't be grabbing rtnl by then. It's too late and doing so causes reversed locking. So this patch: - move rtnl handling to callers instead while already fixing some reversed locking situations, like on vxlan and ipvs code. - renames __ ones to not have the __ mark: __ip_mc_{join,leave}_group -> ip_mc_{join,leave}_group __ipv6_sock_mc_{join,drop} -> ipv6_sock_mc_{join,drop} Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18ipv4,ipv6: grab rtnl before locking the socketMarcelo Ricardo Leitner
There are some setsockopt operations in ipv4 and ipv6 that are grabbing rtnl after having grabbed the socket lock. Yet this makes it impossible to do operations that have to lock the socket when already within a rtnl protected scope, like ndo dev_open and dev_stop. We normally take coarse grained locks first but setsockopt inverted that. So this patch invert the lock logic for these operations and makes setsockopt grab rtnl if it will be needed prior to grabbing socket lock. Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18Merge branch 'listen_refactor_part_13'David S. Miller
Eric Dumazet says: ==================== inet: tcp listener refactoring, part 13 inet_hash functions are in a bad state : Too much IPv6/IPv4 copy/pasting. Lets refactor a bit. Idea is that we do not want to have an equivalent of inet_csk(sk)->icsk_af_ops for request socks in order to be able to use the right variant. In this patch series, I started to let IPv6/IPv4 converge to common helpers. Idea is to use ipv6_addr_set_v4mapped() even for AF_INET sockets, so that we can test if (sk->sk_family == AF_INET6 && !ipv6_addr_v4mapped(&sk->sk_v6_daddr)) to tell if we deal with an IPv6 socket, or IPv4 one, at least in slow paths. Ideally, we could save 8 bytes per struct sock_common, if we alias skc_daddr & skc_rcv_saddr to skc_v6_daddr[3]/skc_v6_rcv_saddr[3]. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18inet: request sock should init IPv6/IPv4 addressesEric Dumazet
In order to be able to use sk_ehashfn() for request socks, we need to initialize their IPv6/IPv4 addresses. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18inet: get rid of last __inet_hash_connect() argumentEric Dumazet
We now always call __inet_hash_nolisten(), no need to pass it as an argument. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18ipv6: get rid of __inet6_hash()Eric Dumazet
We can now use inet_hash() and __inet_hash() instead of private functions. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18inet: add IPv6 support to sk_ehashfn()Eric Dumazet
Intent is to converge IPv4 & IPv6 inet_hash functions to factorize code. IPv4 sockets initialize sk_rcv_saddr and sk_v6_daddr in this patch, thanks to new sk_daddr_set() and sk_rcv_saddr_set() helpers. __inet6_hash can now use sk_ehashfn() instead of a private inet6_sk_ehashfn() and will simply use __inet_hash() in a following patch. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18net: introduce sk_ehashfn() helperEric Dumazet
Goal is to unify IPv4/IPv6 inet_hash handling, and use common helpers for all kind of sockets (full sockets, timewait and request sockets) inet_sk_ehashfn() becomes sk_ehashfn() but still only copes with IPv4 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18netns: constify net_hash_mix() and various callersEric Dumazet
const qualifiers ease code review by making clear which objects are not written in a function. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18blkmq: Fix NULL pointer deref when all reserved tags inSam Bradshaw
When allocating from the reserved tags pool, bt_get() is called with a NULL hctx. If all tags are in use, the hw queue is kicked to push out any pending IO, potentially freeing tags, and tag allocation is retried. The problem is that blk_mq_run_hw_queue() doesn't check for a NULL hctx. So we avoid it with a simple NULL hctx test. Tested by hammering mtip32xx with concurrent smartctl/hdparm. Signed-off-by: Sam Bradshaw <sbradshaw@micron.com> Signed-off-by: Selvan Mani <smani@micron.com> Fixes: b32232073e80 ("blk-mq: fix hang in bt_get()") Cc: stable@kernel.org Added appropriate comment. Signed-off-by: Jens Axboe <axboe@fb.com>
2015-03-18ARM: dts: Fix gpio interrupts for dm816xTony Lindgren
Commit 7800064ba507 ("ARM: dts: Add basic dm816x device tree configuration") added basic devices for dm816x, but I was not able to test the GPIO interrupts earlier until I found some suitable pins to test with. We can mux the MMC card detect and write protect pins from SD_SDCD and SD_SDWP mode to use a normal GPIO interrupts that are also suitable for the MMC subsystem. This turned out several issues that need to be fixed: - I set the GPIO type wrong to be compatible with omap3 instead of omap4. The GPIO controller on dm816x has EOI interrupt register like omap4 and am335x. - I got the GPIO interrupt numbers wrong as each bank has two and we only use one. They need to be set up the same way as on am335x. - The gpio banks are missing interrupt controller related properties. With these changes the GPIO interrupts can be used with the MMC card detect pin, so let's wire that up. Let's also mux all the MMC lines for completeness while at it. For the first GPIO bank I tested using GPMC lines temporarily muxed to GPIOs on the dip switch 10. Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-18ARM: dts: dra7: remove ti,hwmod property from pcie phyKishon Vijay Abraham I
Now that we don't have hwmod entry for pcie PHY remove the ti,hwmod property from PCIE PHY's. Otherwise we will get: platform 4a094000.pciephy: Cannot lookup hwmod 'pcie1-phy' Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-18Merge branch 'mlx4-net'David S. Miller
Or Gerlitz says: ==================== mlx4 driver fixes for 4.0-rc Just few small fixes for the 4.0 rc cycle. The fix from Moni addresses an issue from 4.0-rc1 so we just need it for net. Eran's fix for off-by-one should go to 3.19.y too. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18net/mlx4_en: Set statistics bitmap at port initEran Ben Elisha
Port statistics bitmap will now be initialized at port init. Even before starting the port, statistics are visible to the user and must be properly masked. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18IB/mlx4: Saturate RoCE port PMA counters in case of overflowMajd Dibbiny
For RoCE ports, we set the u32 PMA values based on u64 HCA counters. In case of overflow, according to the IB spec, we have to saturate a counter to its max value, do that. Fixes: c37791349cc7 ('IB/mlx4: Support PMA counters for IBoE') Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18net/mlx4_en: Fix off-by-one in ethtool statistics displayEran Ben Elisha
NUM_PORT_STATS was 9 instead of 10, which caused off-by-one bug when displaying the statistics starting from tx_chksum_offload in ethtool. Fixes: f8c6455bb04b ('net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETE') Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18IB/mlx4: Verify net device validity on port change eventMoni Shoua
Processing an event is done in a different context from the one when the event was dispatched. This requires a check that the slave net device is still valid when the event is being processed. The check is done under the iboe lock which ensure correctness. Fixes: a57500903093 ('IB/mlx4: Add port aggregation support') Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 16:47:25 +0000