summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-03-16net/fsl: fix a bug in xgmac_mdioShaohui Xie
There is a bug in xgmac_wait_until_done() which mdio_stat should be used instead of mdio_data when checking if busy bit is cleared. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16net: kernel socket should be released in init_net namespaceYing Xue
Creating a kernel socket with sock_create_kern() happens in "init_net" namespace, however, releasing it with sk_release_kernel() occurs in the current namespace which may be different with "init_net" namespace. Therefore, we should guarantee that the namespace in which a kernel socket is created is same as the socket is created. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16rhashtable: Annotate RCU locking of walkersThomas Graf
Fixes the following sparse warnings: lib/rhashtable.c:767:5: warning: context imbalance in 'rhashtable_walk_start' - wrong count at exit lib/rhashtable.c:849:6: warning: context imbalance in 'rhashtable_walk_stop' - unexpected unlock Fixes: f2dba9c6ff0d ("rhashtable: Introduce rhashtable_walk_*") Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16Merge tag 'mac80211-for-davem-2015-03-16' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Here are a few fixes that I'd like to still get in: * disable U-APSD for better interoperability, from Michal Kazior * drop unencrypted frames in mesh forwarding, from Bob Copeland * treat non-QoS/WMM HT stations as non-HT, to fix confusion when they connect and then get QoS packets anyway due to HT * fix counting interfaces for combination checks, otherwise the interface combinations aren't properly enforced (from Andrei) * fix pure ECSA by reacting to the IE change * ignore erroneous (E)CSA to the current channel which sometimes happens due to AP/GO bugs ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2015-03-16 1) Fix the network header offset in _decode_session6 when multiple IPv6 extension headers are present. From Hajime Tazaki. 2) Fix an interfamily tunnel crash. We set outer mode protocol too early and may dispatch to the wrong address family. Move the setting of the outer mode protocol behind the last accessing of the inner mode to fix the crash. 3) Most callers of xfrm_lookup() expect that dst_orig is released on error. But xfrm_lookup_route() may need dst_orig to handle certain error cases. So introduce a flag that tells what should be done in case of error. From Huaibin Wang. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16rocker: replace fixed stack allocation with dynamic allocationScott Feldman
In hast to fix some sparse warning, I hard-coded a fix-sized array on the stack which is probably too big for kernel standards. Fix this by converting array to dynamic allocation. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16Merge branch 'listener_refactor'David S. Miller
Eric Dumazet says: ==================== inet: tcp listener refactoring, part 10 We are getting close to the point where request sockets will be hashed into generic hash table. Some followups are needed for netfilter and will be handled in next patch series. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16inet: add proper refcounting to request sockEric Dumazet
reqsk_put() is the generic function that should be used to release a refcount (and automatically call reqsk_free()) reqsk_free() might be called if refcount is known to be 0 or undefined. refcnt is set to one in inet_csk_reqsk_queue_add() As request socks are not yet in global ehash table, I added temporary debugging checks in reqsk_put() and reqsk_free() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16inet: factorize sock_edemux()/sock_gen_put() codeEric Dumazet
sock_edemux() is not used in fast path, and should really call sock_gen_put() to save some code. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16inet_diag: allow sk_diag_fill() to handle request socksEric Dumazet
inet_diag_fill_req() is renamed to inet_req_diag_fill() and moved up, so that it can be called fom sk_diag_fill() inet_diag_bc_sk() is ready to handle request socks. inet_twsk_diag_dump() is no longer needed. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16inet: ip early demux should avoid request socketsEric Dumazet
When a request socket is created, we do not cache ip route dst entry, like for timewait sockets. Let's use sk_fullsock() helper. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16net: add sk_fullsock() helperEric Dumazet
We have many places where we want to check if a socket is not a timewait or request socket. Use a helper to avoid hard coding this. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16Bluetooth: Do not include LE SC out-of-band data if not enabledMarcel Holtmann
In case LE Secure Connections is not enabled, then the command for returning local out-of-band data should not include the confirmation and random value for LE SC pairing. All other fields are still valid, but these two need to be left out. In that case it is also no needed to generate the public/private key pair for out-of-band pairing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-16Bluetooth: The P-256 randomizer is 16 octets long and not 19 octetsMarcel Holtmann
This seems to be a simple typo in the debugfs entry for the remote out-of-band data entries. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-16Bluetooth: Rename smp->local_rr into smp->local_randMarcel Holtmann
The variable for the out-of-band random number was badly named and with that confusing. Just rename it to local_rand so it is clear what value it represents. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-16Bluetooth: Add extra SMP_DBG statement for remote OOB dataMarcel Holtmann
Just for pure debugging purposes print the remote out-of-band data that has been received and is going to be used. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-16Bluetooth: Use smp->remote_pk + 32 instead of &smp->remote_pk[32]Marcel Holtmann
Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-16Bluetooth: Add clarifying comment when setting local OOB flagJohan Hedberg
It might be a bit counterintuitive to set a 'local' flag based on remote data. This patch adds a clarifying comment to the pairing req/rsp handlers when setting the LOCAL_OOB flag based on the PDU received from the remote side. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-16dmaengine: dw: append MODULE_ALIAS for platform driverAndy Shevchenko
The commit 9cade1a46c77 (dma: dw: split driver to library part and platform code) introduced a separate platform driver but missed to add a MODULE_ALIAS("platform:dw_dmac"); to that module. The patch adds this to get driver loaded automatically if platform device is registered. Reported-by: "Blin, Jerome" <jerome.blin@intel.com> Fixes: 9cade1a46c77 (dma: dw: split driver to library part and platform code) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-16Bluetooth: Don't send public key if OOB data verification failsJohan Hedberg
When we receive the remote public key, if we have remote OOB data there's no point in sending our public key to the remote if the OOB data doesn't match. This patch moves the test for this higher up in the smp_cmd_public_key() function. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-16Revert "Input: synaptics - use dmax in input_mt_assign_slots"Dmitry Torokhov
This reverts commit 6ab17a8484f03c188a93713369912f1545eb26e9 since it, according to Benjamin, causes issues with slot assignment: E: 15.669119 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- E: 15.954242 0003 002f 0000 # EV_ABS / ABS_MT_SLOT 0 E: 15.954242 0003 0039 0505 # EV_ABS / ABS_MT_TRACKING_ID 505 E: 15.954242 0003 0035 3851 # EV_ABS / ABS_MT_POSITION_X 3851 E: 15.954242 0003 0036 4076 # EV_ABS / ABS_MT_POSITION_Y 4076 E: 15.954242 0003 003a 0034 # EV_ABS / ABS_MT_PRESSURE 34 E: 15.954242 0001 014a 0001 # EV_KEY / BTN_TOUCH 1 E: 15.954242 0003 0000 3851 # EV_ABS / ABS_X 3851 E: 15.954242 0003 0001 4076 # EV_ABS / ABS_Y 4076 E: 15.954242 0003 0018 0034 # EV_ABS / ABS_PRESSURE 34 E: 15.954242 0001 0145 0001 # EV_KEY / BTN_TOOL_FINGER 1 E: 15.954242 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- ... (bunch of regular events)... E: 16.020614 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- E: 16.043601 0003 0035 3873 # EV_ABS / ABS_MT_POSITION_X 3873 E: 16.043601 0003 0036 3903 # EV_ABS / ABS_MT_POSITION_Y 3903 E: 16.043601 0003 003a 0050 # EV_ABS / ABS_MT_PRESSURE 50 E: 16.043601 0003 0035 3032 # EV_ABS / ABS_MT_POSITION_X 3032 E: 16.043601 0003 0036 3832 # EV_ABS / ABS_MT_POSITION_Y 3832 E: 16.043601 0003 003a 0044 # EV_ABS / ABS_MT_PRESSURE 44 E: 16.043601 0003 0000 3032 # EV_ABS / ABS_X 3032 E: 16.043601 0003 0001 3832 # EV_ABS / ABS_Y 3832 E: 16.043601 0003 0018 0044 # EV_ABS / ABS_PRESSURE 44 E: 16.043601 0001 0145 0000 # EV_KEY / BTN_TOOL_FINGER 0 E: 16.043601 0001 014d 0001 # EV_KEY / BTN_TOOL_DOUBLETAP 1 E: 16.043601 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- E: 16.068837 0003 002f 0001 # EV_ABS / ABS_MT_SLOT 1 E: 16.068837 0003 0039 0506 # EV_ABS / ABS_MT_TRACKING_ID 506 E: 16.068837 0003 0035 3912 # EV_ABS / ABS_MT_POSITION_X 3912 E: 16.068837 0003 0036 3743 # EV_ABS / ABS_MT_POSITION_Y 3743 E: 16.068837 0003 003a 0056 # EV_ABS / ABS_MT_PRESSURE 56 E: 16.068837 0003 002f 0000 # EV_ABS / ABS_MT_SLOT 0 E: 16.068837 0003 0035 3026 # EV_ABS / ABS_MT_POSITION_X 3026 E: 16.068837 0003 0036 3708 # EV_ABS / ABS_MT_POSITION_Y 3708 E: 16.068837 0003 003a 0052 # EV_ABS / ABS_MT_PRESSURE 52 E: 16.068837 0003 0000 3026 # EV_ABS / ABS_X 3026 E: 16.068837 0003 0001 3708 # EV_ABS / ABS_Y 3708 E: 16.068837 0003 0018 0052 # EV_ABS / ABS_PRESSURE 52 E: 16.068837 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- Slot 0 and 1 gets inverted in the second report above, which introduces a cursor jump. The problem is that this cursor jump is often enough to leave the current widget, and X sends the scrolling events to whoever is now under the cursor. Reported-by: Benjamin Tissoires <btissoir@redhat.com> Reported-by: Hans de Goede <hdegoede@redhat.com>
2015-03-16Bluetooth: Fix verifying confirm value when lacking remote OOB dataJohan Hedberg
If we haven't received remote OOB data we cannot perform any special checks on the confirm value. This patch updates the check after having received the public key to only perform the verification if we have remote OOB data present. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-16Bluetooth: Set local OOB data flag if remote has our OOB dataJohan Hedberg
If the SMP Pairing Request or Response PDU received from the remote device indicates that it has received our OOB data we should set the SMP_FLAG_LOCAL_OOB flag. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-16Bluetooth: Track local vs remote OOB data availabilityJohan Hedberg
There are several decisions in the SMP logic that depend not only on whether we're doing SMP or not, but also whether local and/or remote OOB data is present. This patch splits the existing SMP_FLAG_OOB into two new flags to track local and remote OOB data respectively. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-16Bluetooth: Fix local OOB data handling for SMPJohan Hedberg
We need to store the local ra/rb value in order to verify the Check value received from the remote. This patch adds a new 'lr' for the local ra/rb value and makes sure it gets used when verifying the DHKey Check PDU received from the remote. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-16Merge branch 'synaptics' into for-linusDmitry Torokhov
Bring in changes needed to properly handle Lenovo 2015 lineup.
2015-03-16mwifiex: delay skb allocation for RX until cmd53 overZhaoyang Liu
This patch moves SKB allocation for RX packets from current place i.e. after reading MP regs to place where we already have read data from SDIO bus ie after cmd53. mp_rx_aggr_setup has been modified accordingly to set skb_arr to NULL. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Shengzhen Li <szli@marvell.com> Reviewed-by: Amitkumar Karwar <akarwar@marvell.com> Reviewed-by: Cathy Luo <cluo@marvell.com> Reviewed-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16mwifiex: add SDIO rx single port aggregationZhaoyang Liu
This patch brings in support for SDIO single port rx aggregation to mwifiex. Maximum read size support by SDIO cmd53 is 64K. Based on multi port aggregation which is already part of mwifiex, idea here is multiple packets received in FW can be aggregated into single buffer. A separate upload type is defined for such packet aggregated to single port. Packets from this single buffer are later deaggregated into individual packets. This way, driver can receive more packets each time through single SDIO cmd53; thereby reducing no of times MMC bus is accessed. SDIO SP aggregation support is advertised by FW during load time and driver would get FW block size in command response of HostCmd_CMD_SDIO_SP_RX_AGGR_CFG. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Reviewed-by: Amitkumar Karwar <akarwar@marvell.com> Reviewed-by: Cathy Luo <cluo@marvell.com> Reviewed-by: Avinash Patil <patila@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16mwifiex: preprocess packets from TX queueZhaoyang Liu
During profiling, we discovered that driver remains idle for time when pakcet is downloaded to FW but no TX_DONE has been received i.e. while data_sent is true. This patch adds enhancement to TX routine where we preprocess packets from TX queue, make them ready for TX and add them to separate TX queue. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Chin-ran Lo <crlo@marvell.com> Reviewed-by: Cathy Luo <cluo@marvell.com> Reviewed-by: Amitkumar Karwar <akarwar@marvell.com> Reviewed-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16mwifiex: remove_bss_prio_lockZhaoyang Liu
This patch does away with spinlock in mwifiex_wmm_get_highest_priolist_ptr in order to improve TP. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16mwifiex: get rid of BA setup helper functionsZhaoyang Liu
This patch removes BA setup helper routines mwifiex_is_bastream_setup and mwifiex_is_amsdu_in_ampdu_allowed. Current code will use two functions to check bastream setup and amsdu in ampdu. This patch change these functions to flags, thus avoiding redundant spin_lock check while dequeuing TX packets. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Reviewed-by: Cathy Luo <cluo@marvell.com> Reviewed-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16mwifiex: avoid queue_work while work is ongoingShengzhen Li
Current code does not check whether main_work_queue or rx_work_queue is running when preparing to do queue_work, this code fix add check before calling queue_work, reducing unnecessary queue_work switch. This change instead sets more_task flag to ensure we run main_process superloop once again. Signed-off-by: Shengzhen Li <szli@marvell.com> Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Reviewed-by: Cathy Luo <cluo@marvell.com> Reviewed-by: Amitkumar Karwar <akarwar@marvell.com> Reviewed-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16mwifiex: enhance SD8897 MP aggregation limitsAvinash Patil
SD8897 support buffers of 4K and 16 such ports can be accomodated. So basically 64K buffer size in single aggregation is supported. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16mwifiex: rename alloc_rx_buf to alloc_dma_aligned_bufAvinash Patil
Rename this function to reflect its purpose correctly. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16mwifiex: lock main process till reinitialization of vif is overAvinash Patil
A crash was detected while changing virtual interface type is in progress. This was tracked to race condition in accessing bss_priority table while change is in progress. This patch ensures that main_process and rx_process works are locked while we change virtual interface. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16wl18xx: show rx_frames_per_rates as an array as it really isNicolas Iooss
In struct wl18xx_acx_rx_rate_stat, rx_frames_per_rates field is an array, not a number. This means WL18XX_DEBUGFS_FWSTATS_FILE can't be used to display this field in debugfs (it would display a pointer, not the actual data). Use WL18XX_DEBUGFS_FWSTATS_FILE_ARRAY instead. This bug has been found by adding a __printf attribute to wl1271_format_buffer. gcc complained about "format '%u' expects argument of type 'unsigned int', but argument 5 has type 'u32 *'". Fixes: c5d94169e818 ("wl18xx: use new fw stats structures") Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16rt2x00usb: drop rt2x00usb_disable_radio() from rt2800usb_disable_radio()Sebastian Andrzej Siewior
I have here FRITZ!WLAN USB Stick N v2 / idVendor=057c, idProduct=8501 and every single of this requests ends up with: |ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -32 I was browsing the the vedor code and I haven't seen such request so I remove it with this patch. If I wasn't look enough or if this error is expected then please excuse :) Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16rt2x00usb: check USB's request error code in rt2800usb_autorun_detect()Sebastian Andrzej Siewior
rt2800usb_autorun_detect() blindly assumes assumes that it worked while it could have failed. Check the error code here. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16rt2x00usb: initialize the read value in case of failureSebastian Andrzej Siewior
My understanding ist that rt2x00usb_register_read() is void and so the reader is unaware of read errors and assumes that whatever was on the stack as it was about to read. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16mwifiex: use del_timer variant in interrupt contextAmitkumar Karwar
We might be in interrupt context at few places. So replace del_timer_sync() with del_timer(). This patch fixes a kernel trace problem seen occasionally during our testing. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16mwifiex: Add support for auto ARP in mwifiex.Maithili Hinge
This patch adds support for auto ARP feature in mwifiex. The device will respond to ARP requests from the network with ARP response in suspended state without waking up the host. This feature is enabled in the driver by default. Signed-off-by: Maithili Hinge <maithili@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16mwifiex: fix a bug in Rx multiport aggregation logicCathy Luo
It's been observed Rx aggregated packets are always followed by a single Rx packet. This patch improves our logic to add that extra packet in next aggregation. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16rtlwifi: No need to export rtl_evm_dbm_jaguar anymorePriit Laes
This function is used only by rtl8821ae so move it there Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16rtlwifi: Clean rtl_evm_db_to_percentage a bitPriit Laes
Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16ath9k: allow 40MHz radar detection widthZefir Kurtisi
Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16ath9k: add DFS support for extension channelZefir Kurtisi
In HT40 modes, pulse events on primary and extension channel are processed individually. If valid, a pulse event will be fed into the detector * for primary frequency, or * for extension frequency (+/-20MHz based on HT40-mode) * or both With that, a 40MHz radar will result in two individual radar events. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16ath9k: restart only triggering DFS detector lineZefir Kurtisi
To support HT40 DFS mode, a triggering detector must reset only itself but not other detector lines. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16Merge tag 'v4.0-rockchip-armfixes1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Pull "ARM: rockchip: small fixes for 4.0-rc" from Heiko Stuebner: Adding a default-disabled state to the new gmac node and an update to the MAINTAINERS entry adding a rockchip regexp entry. * tag 'v4.0-rockchip-armfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: disable gmac by default in rk3288.dtsi MAINTAINERS: add rockchip regexp to the ARM/Rockchip entry
2015-03-16ALSA: hda - Treat stereo-to-mono mix properlyTakashi Iwai
The commit [ef403edb7558: ALSA: hda - Don't access stereo amps for mono channel widgets] fixed the handling of mono widgets in general, but it still misses an exceptional case: namely, a mono mixer widget taking a single stereo input. In this case, it has stereo volumes although it's a mono widget, and thus we have to take care of both left and right input channels, as stated in HD-audio spec ("7.1.3 Widget Interconnection Rules"). This patch covers this missing piece by adding proper checks of stereo amps in both the generic parser and the proc output codes. Reported-by: Raymond Yau <superquad.vortex2@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-16netfilter: bridge: remove BRNF_STATE_BRIDGED flagFlorian Westphal
Its not needed anymore since 2bf540b73ed5b ([NETFILTER]: bridge-netfilter: remove deferred hooks). Before this it was possible to have physoutdev set for locally generated packets -- this isn't the case anymore: BRNF_STATE_BRIDGED flag is set when we assign nf_bridge->physoutdev, so physoutdev != NULL means BRNF_STATE_BRIDGED is set. If physoutdev is NULL, then we are looking at locally-delivered and routed packet. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
generated by cgit (git 2.34.1) at 2025-09-16 06:03:20 +0000