Age | Commit message (Collapse) | Author |
|
'virtio', 'x86/vt-d', 'x86/amd' and 'core' into next
|
|
Some VT-d hardware implementations invalidate all DMA remapping hardware
translation caches as part of SRTP flow. The VT-d spec adds a ESRTPS
(Enhanced Set Root Table Pointer Support, section 11.4.2 in VT-d spec)
capability bit to indicate this. With this bit set, software has no need
to issue the global invalidation request.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220919062523.3438951-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Some VT-d hardware implementations invalidate all interrupt remapping
hardware translation caches as part of SIRTP flow. The VT-d spec adds
a ESIRTPS (Enhanced Set Interrupt Remap Table Pointer Support, section
11.4.2 in VT-d spec) capability bit to indicate this.
The spec also states in 11.4.4 that hardware also performs global
invalidation on all interrupt remapping caches as part of Interrupt
Remapping Disable operation if ESIRTPS capability bit is set.
This checks the ESIRTPS capability bit and skip software global cache
invalidation if it's set.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220921065741.3572495-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
This renaming better describes it is for first level page table (a.k.a
first stage page table since VT-d spec 3.4).
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220916071326.2223901-1-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
It is not used anywhere in the tree. Remove it to avoid dead code.
No functional change intended.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220915081645.1834555-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Previously the PCI PASID and PRI capabilities are enabled in the path of
iommu device probe only if INTEL_IOMMU_SVM is configured and the device
supports ATS. As we've already decoupled the I/O page fault handler from
SVA, we could also decouple PASID and PRI enabling from it to make room
for growth of new features like kernel DMA with PASID, SIOV and nested
translation.
At the same time, the iommu_enable_dev_iotlb() helper is also called in
iommu_dev_enable_feature(dev, IOMMU_DEV_FEAT_SVA) path. It's unnecessary
and duplicate. This cleanups this helper to make the code neat.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220915085814.2261409-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The existing I/O page fault handling code accesses the per-PASID SVA data
structures. This is unnecessary and makes the fault handling code only
suitable for SVA scenarios. This removes the SVA data accesses from the
I/O page fault reporting and responding code, so that the fault handling
code could be generic.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220914011821.400986-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The QEMU devicetree uses a different order for SMMUv3 interrupt names,
and there isn't a good reason for enforcing a specific order. Since all
interrupt lines are optional, operating systems should not expect a
fixed interrupt array layout; they should instead match each interrupt
to its name individually. Besides, as a result of commit e4783856a2e8
("dt-bindings: iommu: arm,smmu-v3: make PRI IRQ optional"), "cmdq-sync"
and "priq" are already permutable. Relax the interrupt-names array
entirely by allowing any permutation, incidentally making the schema
more readable.
Note that dt-validate won't allow duplicate names here so we don't need
to specify maxItems or add additional checks, it's quite neat.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220916133145.1910549-1-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The M1 Pro/Max/Ultra SoCs come with a new variant of DART which
supports a larger physical address space with a different PTE format.
Pass through the correct paddr address space size and the PTE format
to the io-pgtable code which will take care of the rest.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Co-developed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20220916094152.87137-6-j@jannau.net
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The DARTs present in the M1 Pro/Max/Ultra SoC use a diffent PTE format.
They support a 42bit physical address space by shifting the paddr and
extending its mask inside the PTE.
They also come with mandatory sub-page protection now which we just
configure to always allow access to the entire page. This feature is
already present but optional on the previous DARTs which allows to
unconditionally configure it.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Co-developed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20220916094152.87137-5-j@jannau.net
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
DART allows to only expose a subpage to the device. While this is an
optional feature on the M1 DARTs the new ones present on the Pro/Max
models require this field in every PTE.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20220916094152.87137-4-j@jannau.net
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The pte format used by the DARTs found in the Apple M1 (t8103) is not
fully compatible with io-pgtable-arm. The 24 MSB are used for subpage
protection (mapping only parts of page) and conflict with the address
mask. In addition bit 1 is not available for tagging entries but disables
subpage protection. Subpage protection could be useful to support a CPU
granule of 4k with the fixed IOMMU page size of 16k.
The DARTs found on Apple M1 Pro/Max/Ultra use another different pte
format which is even less compatible. To support an output address size
of 42 bit the address is shifted down by 4. Subpage protection is
mandatory and bit 1 signifies uncached mappings used by the display
controller.
It would be advantageous to share code for all known Apple DART
variants to support common features. The page table allocator for DARTs
is less complex since it uses a two levels of translation table without
support for huge pages.
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20220916094152.87137-3-j@jannau.net
[ joro: Fix compile warning in __dart_alloc_pages()]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add support for the M4Us found in the MT6795 Helio X10 SoC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220913151148.412312-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
In preparation for adding support for MT6795, add a new flag named
TF_PORT_TO_ADDR_MT8173 and use that instead of checking for m4u_plat
type in mtk_iommu_hw_init() to avoid seeing a long list of m4u_plat
checks there in the future.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220913151148.412312-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add bindings for the MediaTek Helio X10 (MT6795) IOMMU/M4U.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220913151148.412312-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
IOMMU_IOVA is intended to be an optional library for users to select as
and when they desire. Since it can be a module now, this means that
built-in code which has chosen not to select it should not fail to link
if it happens to have selected as a module by someone else. Replace
IS_ENABLED() with IS_REACHABLE() to do the right thing.
CC: Thierry Reding <thierry.reding@gmail.com>
Reported-by: John Garry <john.garry@huawei.com>
Fixes: 15bbdec3931e ("iommu: Make the iova library a module")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/548c2f683ca379aface59639a8f0cccc3a1ac050.1663069227.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
CHECK drivers/iommu/amd/iommu.c
drivers/iommu/amd/iommu.c:73:24: warning: symbol 'amd_iommu_ops' was not declared. Should it be static?
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220912063248.7909-6-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Comment is not related to amd_iommu_ops variable.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220912063248.7909-5-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
free_io_pgtable_ops() path uses domain ID to flush pages. Hence
free domain ID after flushing everything.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220912063248.7909-4-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Call domain_id_free() in error path.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220912063248.7909-2-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Regression and bug fixes:
- Performance regression fix from 5.18 on a Rasberry Pi
- Fix extent parsing bug which triggers a BUG_ON when a (corrupted)
extent tree has has a non-root node when zero entries.
- Fix a livelock where in the right (wrong) circumstances a large
number of nfsd threads can try to write to a nearly full file
system, and retry for hours(!)"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: limit the number of retries after discarding preallocations blocks
ext4: fix bug in extents parsing when eh_entries == 0 and eh_depth > 0
ext4: use buckets for cr 1 block scan instead of rbtree
ext4: use locality group preallocation for small closed files
ext4: make directory inode spreading reflect flexbg size
ext4: avoid unnecessary spreading of allocations among groups
ext4: make mballoc try target group first even with mb_optimize_scan
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull NVDIMM and DAX fixes from Dan Williams:
"A recently discovered one-line fix for devdax that further addresses a
v5.5 regression, and (a bit embarrassing) a small batch of fixes that
have been sitting in my fixes tree for weeks.
The older fixes have soaked in linux-next during that time and address
an fsdax infinite loop and some other minor fixups.
- Fix a infinite loop bug in fsdax
- Fix memory-type detection for devdax (EINJ regression)
- Small cleanups"
* tag 'dax-and-nvdimm-fixes-v6.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
devdax: Fix soft-reservation memory description
fsdax: Fix infinite loop in dax_iomap_rw()
nvdimm/namespace: drop nested variable in create_namespace_pmem()
ndtest: Cleanup all of blk namespace specific code
pmem: fix a name collision
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C driver bugfixes for mlxbf and imx, a few documentation fixes after
the rework this cycle, and one hardening for the i2c-mux core"
* tag 'i2c-for-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mux: harden i2c_mux_alloc() against integer overflows
i2c: mlxbf: Fix frequency calculation
i2c: mlxbf: prevent stack overflow in mlxbf_i2c_smbus_start_transaction()
i2c: mlxbf: incorrect base address passed during io write
Documentation: i2c: fix references to other documents
MAINTAINERS: remove Nehal Shah from AMD MP2 I2C DRIVER
i2c: imx: If pm_runtime_get_sync() returned 1 device access is possible
|
|
Pick up another "Soft Reservation" fix for v6.0-final on top of some
straggling nvdimm fixes that missed v5.19.
|
|
The "hmem" platform-devices that are created to represent the
platform-advertised "Soft Reserved" memory ranges end up inserting a
resource that causes the iomem_resource tree to look like this:
340000000-43fffffff : hmem.0
340000000-43fffffff : Soft Reserved
340000000-43fffffff : dax0.0
This is because insert_resource() reparents ranges when they completely
intersect an existing range.
This matters because code that uses region_intersects() to scan for a
given IORES_DESC will only check that top-level 'hmem.0' resource and
not the 'Soft Reserved' descendant.
So, to support EINJ (via einj_error_inject()) to inject errors into
memory hosted by a dax-device, be sure to describe the memory as
IORES_DESC_SOFT_RESERVED. This is a follow-on to:
commit b13a3e5fd40b ("ACPI: APEI: Fix _EINJ vs EFI_MEMORY_SP")
...that fixed EINJ support for "Soft Reserved" ranges in the first
instance.
Fixes: 262b45ae3ab4 ("x86/efi: EFI soft reservation to E820 enumeration")
Reported-by: Ricardo Sandoval Torres <ricardo.sandoval.torres@intel.com>
Tested-by: Ricardo Sandoval Torres <ricardo.sandoval.torres@intel.com>
Cc: <stable@vger.kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Omar Avelar <omar.avelar@intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Mark Gross <markgross@kernel.org>
Link: https://lore.kernel.org/r/166397075670.389916.7435722208896316387.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix build error for the combination of SYSTEM_TRUSTED_KEYRING=y and
X509_CERTIFICATE_PARSER=m
- Fix DEBUG_INFO_SPLIT to generate debug info for GCC 11+ and Clang 12+
- Revive debug info for assembly files
- Remove unused code
* tag 'kbuild-fixes-v6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Makefile.debug: re-enable debug info for .S files
Makefile.debug: set -g unconditional on CONFIG_DEBUG_INFO_SPLIT
certs: make system keyring depend on built-in x509 parser
Kconfig: remove unused function 'menu_get_root_menu'
scripts/clang-tools: remove unused module
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fix from Vasily Gorbik:
- Fix potential hangs in VFIO AP driver
* tag 's390-6.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vfio-ap: bypass unnecessary processing of AP resources
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix an uninitialized variable usage in the operating performance
points code and add missing DT bindings for it.
Specifics:
- Fix uninitialized variable usage in dev_pm_opp_config_clks_simple()
(Christophe JAILLET)
- Add missing OPP DT properties (Rob Herring)"
* tag 'pm-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
dt-bindings: opp: Add missing (unevaluated|additional)Properties on child nodes
OPP: Fix an un-initialized variable usage
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are three tiny driver fixes for 6.0-rc7. They include:
- phy driver reset bugfix
- fpga memleak bugfix
- counter irq config bugfix
The first two have been in linux-next for a while, the last one has
only been added to my tree in the past few days, but was in linux-next
under a different commit id. I couldn't pull directly from the counter
tree due to some gpg key propagation issue, so I took the commit
directly from email instead"
* tag 'char-misc-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
counter: 104-quad-8: Fix skipped IRQ lines during events configuration
fpga: m10bmc-sec: Fix possible memory leak of flash_buf
phy: marvell: phy-mvebu-a3700-comphy: Remove broken reset support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small, and late, serial driver fixes for 6.0-rc7 to
resolve some reported problems.
Included in here are:
- tegra icount accounting fixes, including a framework function that
other drivers will be converted over to using in 6.1-rc1.
- fsl_lpuart reset bugfix
- 8250 omap 485 bugfix
- sifive serial clock bugfix
The last three patches have not shown up in linux-next due to them
being added to my tree only 2 days ago, but they are tiny and
self-contained and the developers say they resolve issues that they
have with 6.0-rc. The other three have been in linux-next for a while
with no reported issues"
* tag 'tty-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: sifive: enable clocks for UART when probed
serial: 8250: omap: Use serial8250_em485_supported
serial: fsl_lpuart: Reset prior to registration
serial: tegra-tcu: Use uart_xmit_advance(), fixes icount.tx accounting
serial: tegra: Use uart_xmit_advance(), fixes icount.tx accounting
serial: Create uart_xmit_advance()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Add Waiman Long as a cpuset maintainer
- cgroup_get_from_id() could be fed a kernfs ID which doesn't point to
a cgroup directory but a knob file and then crash. Error out if the
lookup kernfs_node isn't a directory.
* tag 'cgroup-for-6.0-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: cgroup_get_from_id() must check the looked-up kn is a directory
cpuset: Add Waiman Long as a cpuset maintainer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
"Just one patch to improve flush lockdep coverage"
* tag 'wq-for-6.0-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: don't skip lockdep work dependency in cancel_work_sync()
|
|
Pull io_uring fix from Jens Axboe:
"Just a single fix for an issue with un-reaped IOPOLL requests on ring
exit"
* tag 'io_uring-6.0-2022-09-23' of git://git.kernel.dk/linux:
io_uring: ensure that cached task references are always put on exit
|
|
Pull block fixes from Jens Axboe:
"Fix a regression that's been plaguing us by reverting the offending
commit, as attempts to both reproduce the issue and fix it in a saner
fashion have failed.
Fix for a potential oops condition in the s390 dasd block driver"
* tag 'block-6.0-2022-09-22' of git://git.kernel.dk/linux:
Revert "block: freeze the queue earlier in del_gendisk"
s390/dasd: fix Oops in dasd_alias_get_start_dev due to missing pavgroup
|
|
Alexey reported that the fraction of unknown filename instances in
kallsyms grew from ~0.3% to ~10% recently; Bill and Greg tracked it down
to assembler defined symbols, which regressed as a result of:
commit b8a9092330da ("Kbuild: do not emit debug info for assembly with LLVM_IAS=1")
In that commit, I allude to restoring debug info for assembler defined
symbols in a follow up patch, but it seems I forgot to do so in
commit a66049e2cf0e ("Kbuild: make DWARF version a choice")
Link: https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=31bf18645d98b4d3d7357353be840e320649a67d
Fixes: b8a9092330da ("Kbuild: do not emit debug info for assembly with LLVM_IAS=1")
Reported-by: Alexey Alexandrov <aalexand@google.com>
Reported-by: Bill Wendling <morbo@google.com>
Reported-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Dmitrii, Fangrui, and Mashahiro note:
Before GCC 11 and Clang 12 -gsplit-dwarf implicitly uses -g2.
Fix CONFIG_DEBUG_INFO_SPLIT for gcc-11+ & clang-12+ which now need -g
specified in order for -gsplit-dwarf to work at all.
-gsplit-dwarf has been mutually exclusive with -g since support for
CONFIG_DEBUG_INFO_SPLIT was introduced in
commit 866ced950bcd ("kbuild: Support split debug info v4")
I don't think it ever needed to be.
Link: https://lore.kernel.org/lkml/20220815013317.26121-1-dmitrii.bundin.a@gmail.com/
Link: https://lore.kernel.org/lkml/CAK7LNARPAmsJD5XKAw7m_X2g7Fi-CAAsWDQiP7+ANBjkg7R7ng@mail.gmail.com/
Link: https://reviews.llvm.org/D80391
Cc: Andi Kleen <ak@linux.intel.com>
Reported-by: Dmitrii Bundin <dmitrii.bundin.a@gmail.com>
Reported-by: Fangrui Song <maskray@google.com>
Reported-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Dmitrii Bundin <dmitrii.bundin.a@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
io_uring caches task references to avoid doing atomics for each of them
per request. If a request is put from the same task that allocated it,
then we can maintain a per-ctx cache of them. This obviously relies
on io_uring always pruning caches in a reliable way, and there's
currently a case off io_uring fd release where we can miss that.
One example is a ring setup with IOPOLL, which relies on the task
polling for completions, which will free them. However, if such a task
submits a request and then exits or closes the ring without reaping
the completion, then ring release will reap and put. If release happens
from that very same task, the completed request task refs will get
put back into the cache pool. This is problematic, as we're now beyond
the point of pruning caches.
Manually drop these caches after doing an IOPOLL reap. This releases
references from the current task, which is enough. If another task
happens to be doing the release, then the caching will not be
triggered and there's no issue.
Cc: stable@vger.kernel.org
Fixes: e98e49b2bbf7 ("io_uring: extend task put optimisations")
Reported-by: Homin Rhee <hominlab@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"These are all very simple and self-contained, although the CFI
jump-table fix touches the generic linker script as that's where the
problematic macro lives.
- Fix false positive "sleeping while atomic" warning resulting from
the kPTI rework taking a mutex too early.
- Fix possible overflow in AMU frequency calculation
- Fix incorrect shift in CMN PMU driver which causes problems with
newer versions of the IP
- Reduce alignment of the CFI jump table to avoid huge kernel images
and link errors with !4KiB page size configurations"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
vmlinux.lds.h: CFI: Reduce alignment of jump-table to function alignment
perf/arm-cmn: Add more bits to child node address offset field
arm64: topology: fix possible overflow in amu_fie_setup()
arm64: mm: don't acquire mutex when rewriting swapper
|
|
Commit e90886291c7c ("certs: make system keyring depend on x509 parser")
is not the right fix because x509_load_certificate_list() can be modular.
The combination of CONFIG_SYSTEM_TRUSTED_KEYRING=y and
CONFIG_X509_CERTIFICATE_PARSER=m still results in the following error:
LD .tmp_vmlinux.kallsyms1
ld: certs/system_keyring.o: in function `load_system_certificate_list':
system_keyring.c:(.init.text+0x8c): undefined reference to `x509_load_certificate_list'
make: *** [Makefile:1169: vmlinux] Error 1
Fixes: e90886291c7c ("certs: make system keyring depend on x509 parser")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Adam Borowski <kilobyte@angband.pl>
|
|
There is nowhere calling `menu_get_root_menu` function,
so remove it.
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Remove unused imported 'os' module.
Signed-off-by: yangxingwu <xingwu.yang@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
cgroup has to be one kernfs dir, otherwise kernel panic is caused,
especially cgroup id is provide from userspace.
Reported-by: Marco Patalano <mpatalan@redhat.com>
Fixes: 6b658c4863c1 ("scsi: cgroup: Add cgroup_get_from_id()")
Cc: Muneendra <muneendra.kumar@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two tiny driver core fixes for 6.0-rc7 that resolve some
oft-reported problems.
The first is a revert of the "fw_devlink.strict=1" default option that
we keep trying to enable, but we keep finding platforms that this just
breaks everything on. So again, we need it reverted and hopefully it
can be worked on in future releases.
The second is a sysfs file-size bugfix that resolves an issue that
many people are starting to hit as the fix it is fixing also was
backported to stable kernels. The util-linux developers are starting
to get bugreports about sysfs files that contain no data because of
this problem, and this fix which has been in linux-next in the
bitfield tree for a long time, resolves it. I'm submitting it here as
it needs to be merged for 6.0-final, not for 6.1-rc1.
Both of these have been in linux-next with no reported issues, only
reports were that these fixed problems"
* tag 'driver-core-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers/base: Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES
Revert "driver core: Set fw_devlink.strict=1 by default"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver fixes and ids from Greg KH:
"Here are a few small USB and Thunderbolt driver fixes and new device
ids for 6.0-rc7.
They contain:
- new usb-serial driver ids
- documentation build warning fix in USB hub code
- flexcop-usb long-posted bugfix (the v4l maintainer for this is MIA
so I have finally picked this up as it is a fix for a reported
problem.)
- dwc3 64bit DMA bugfix
- new thunderbolt device ids
- typec build error fix
All of these have been in linux-next with no reported issues"
* tag 'usb-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: anx7411: Fix build error without CONFIG_POWER_SUPPLY
media: flexcop-usb: fix endpoint type check
USB: serial: option: add Quectel RM520N
USB: serial: option: add Quectel BG95 0x0203 composition
thunderbolt: Add support for Intel Maple Ridge single port controller
usb: dwc3: core: leave default DMA if the controller does not support 64-bit DMA
USB: core: Fix RST error in hub.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fix from Mickaël Salaün:
"Fix out-of-tree builds for Landlock tests"
* tag 'landlock-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Fix out-of-tree builds
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A handful of build fixes for the T-Head errata, including some
functional issues the compilers found
- A fix for a nasty sigreturn bug
* tag 'riscv-for-linus-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Avoid coupling the T-Head CMOs and Zicbom
riscv: fix a nasty sigreturn bug...
riscv: make t-head erratas depend on MMU
riscv: fix RISCV_ISA_SVPBMT kconfig dependency warning
RISC-V: Clean up the Zicbom block size probing
|
|
Pull kvm fixes from Paolo Bonzini:
"As everyone back came back from conferences, here are the pending
patches for Linux 6.0.
ARM:
- Fix for kmemleak with pKVM
s390:
- Fixes for VFIO with zPCI
- smatch fix
x86:
- Ensure XSAVE-capable hosts always allow FP and SSE state to be
saved and restored via KVM_{GET,SET}_XSAVE
- Fix broken max_mmu_rmap_size stat
- Fix compile error with old glibc that doesn't have gettid()"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Inject #UD on emulated XSETBV if XSAVES isn't enabled
KVM: x86: Always enable legacy FP/SSE in allowed user XFEATURES
KVM: x86: Reinstate kvm_vcpu_arch.guest_supported_xcr0
KVM: x86/mmu: add missing update to max_mmu_rmap_size
selftests: kvm: Fix a compile error in selftests/kvm/rseq_test.c
KVM: s390: pci: register pci hooks without interpretation
KVM: s390: pci: fix GAIT physical vs virtual pointers usage
KVM: s390: Pass initialized arg even if unused
KVM: s390: pci: fix plain integer as NULL pointer warnings
KVM: arm64: Use kmemleak_free_part_phys() to unregister hyp_mem_base
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A single fix for an issue in the xenbus driver (initialization of
multi-page rings for Xen PV devices)"
* tag 'for-linus-6.0-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/xenbus: fix xenbus_setup_ring()
|
|
Pull drm fixes from Dave Airlie:
"Regular fixes for the week, i915, mediatek, hisilicon, mgag200 and
panel have some small fixes.
amdgpu has more stack size fixes for clang build, and fixes for new
IPs, but all with low regression chances since they are for stuff new
in v6.0.
i915:
- avoid a general protection failure when using perf/OA
- avoid kernel warnings on driver release
amdgpu:
- SDMA 6.x fix
- GPUVM TF fix
- DCN 3.2.x fixes
- DCN 3.1.x fixes
- SMU 13.x fixes
- Clang stack size fixes for recently enabled DML code
- Fix drm dirty callback change on non-atomic cases
- USB4 display fix
mediatek:
- dsi: Add atomic {destroy,duplicate}_state, reset callbacks
- dsi: Move mtk_dsi_stop() call back to mtk_dsi_poweroff()
- Fix wrong dither settings
hisilicon:
- Depend on MMU
mgag200:
- Fix console on G200ER
panel:
- Fix innolux_g121i1_l01 bus format"
* tag 'drm-fixes-2022-09-23-1' of git://anongit.freedesktop.org/drm/drm: (30 commits)
MAINTAINERS: switch graphics to airlied other addresses
drm/mediatek: dsi: Move mtk_dsi_stop() call back to mtk_dsi_poweroff()
drm/amd/display: Reduce number of arguments of dml314's CalculateFlipSchedule()
drm/amd/display: Reduce number of arguments of dml314's CalculateWatermarksAndDRAMSpeedChangeSupport()
drm/amdgpu: don't register a dirty callback for non-atomic
drm/amd/pm: drop the pptable related workarounds for SMU 13.0.0
drm/amd/pm: add support for 3794 pptable for SMU13.0.0
drm/amd/display: correct num_dsc based on HW cap
drm/amd/display: Disable OTG WA for the plane_state NULL case on DCN314
drm/amd/display: Add shift and mask for ICH_RESET_AT_END_OF_LINE
drm/amd/display: increase dcn315 pstate change latency
drm/amd/display: Fix DP MST timeslot issue when fallback happened
drm/amd/display: Display distortion after hotplug 5K tiled display
drm/amd/display: Update dummy P-state search to use DCN32 DML
drm/amd/display: skip audio setup when audio stream is enabled
drm/amd/display: update gamut remap if plane has changed
drm/amd/display: Assume an LTTPR is always present on fixed_vs links
drm/amd/display: fix dcn315 memory channel count and width read
drm/amd/display: Fix double cursor on non-video RGB MPO
drm/amd/display: Only consider pixle rate div policy for DCN32+
...
|