summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-04-20Input: kbtab - do not advertise unsupported eventsDmitry Torokhov
The device does not emit EV_MSC/MSC_SERIAL nor EV_KEY/BTN_MIDDLE events so it should not mark them as supported in capabilities bitmaps. This still leaves BTN_TOOL_PEN and BTN_TOUCH events being processed in a funky manner. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-20Input: kbtab - simplify kbtab_disconnect()Dmitry Torokhov
There is no need to check whether kbtab structure is attached to the interface; if it isn't and we are called we have much bigger problems. Also no need to call usb_kill_urb() in kbtab_disconnect() since it is being called in kbtab_close(). Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-20Input: kbtab - fix incorrect size parameter in usb_buffer_freeAxel Lin
The size allocated by usb_buffer_alloc() is 8, however the size passed to usb_buffer_free() is 10. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-20Input: acecad - don't advertise mouse eventsDmitry Torokhov
The device does not emit events for left/right/middle mouse buttons so it should not mark them as supported in capabilities bitmaps. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-20Input: acecad - fix some formatting issuesDmitry Torokhov
Also switch to using input_set_abd_params() helper. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-20Input: acecad - simplify usb_acecad_disconnect()Dmitry Torokhov
There is no need to check whether acecad structure is attached to the interface; if it isn't and we are called we have much bigger problems. Also no need to call usb_kill_urb() in usb_acecad_disconnect() since it is being called in usb_acecad_close(). Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-20Input: acecad - fix incorrect size parameter in usb_buffer_freeAxel Lin
The size allocated by usb_buffer_alloc() is 8, however the size passed to usb_buffer_free() in usb_acecad_disconnect() is 10. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-21m68knommu: allow 4 coldfire serial portsPhilippe De Muyter
Fix driver/serial/mcf.c for 4-ports coldfire's (e.g. MCF5484). Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-04-21m68knommu: fix coldfire tcdrainPhilippe De Muyter
Fix tcdrain on coldfire uarts. Currently with coldfire uarts tcdrain returns without waiting for txempty, because (tx)fifosize is 0. Fix that and call uart_update_timeout when setting the baud rate, otherwise tcdrain will wait for an half our :) Also constify mcf_uart_ops. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-04-21m68knommu: remove a duplicate vector setting line for 68360Greg Ungerer
Remove a duplicate vector setting line for the 68360 interrupt setup. Pointed out by Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-04-21Fix m68k-uclinux's rt_sigreturn trampolineMaxim Kuvyrkov
Signed-off-by: Maxim Kuvyrkov <maxim@codesourcery.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-04-21m68knommu: correct the CC flags for Coldfire M5272 targetsPhilip Nye
Signed-off-by: Philip Nye <philipn@engarts.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-04-21uclinux: error message when FLAT reloc symbol is invalid, v2Jun Sun
This patch fixes a cosmetic error in printk. Text segment and data/bss segment are allocated from two different areas. It is not meaningful to give the diff between them in the error reporting messages. Signed-off-by: Jun Sun <jsun@junsun.net> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-04-20bridge: add a missing ntohs()Eric Dumazet
grec_nsrcs is in network order, we should convert to host horder in br_multicast_igmp3_report() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-20Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-04-21CRED: Fix double free in prepare_usermodehelper_creds() error handlingDavid Howells
Patch 570b8fb505896e007fd3bb07573ba6640e51851d: Author: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Date: Tue Mar 30 00:04:00 2010 +0100 Subject: CRED: Fix memory leak in error handling attempts to fix a memory leak in the error handling by making the offending return statement into a jump down to the bottom of the function where a kfree(tgcred) is inserted. This is, however, incorrect, as it does a kfree() after doing put_cred() if security_prepare_creds() fails. That will result in a double free if 'error' is jumped to as put_cred() will also attempt to free the new tgcred record by virtue of it being pointed to by the new cred record. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2010-04-20x86, mrst: Conditionally register cpu hotplug notifier for apbtJacob Pan
APB timer is used on Moorestown platforms but not on a standard PC. If APB timer code is compiled in but not initialized at run-time due to lack of FW reported SFI table, kernel would panic when the non-boot CPUs are offlined and notifier is called. https://bugzilla.kernel.org/show_bug.cgi?id=15786 This patch ensures CPU hotplug notifier for APB timer is only registered when the APBT timer block is initialized. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> LKML-Reference: <1271701423-1162-1-git-send-email-jacob.jun.pan@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-04-20ext4: Issue the discard operation *before* releasing the blocks to be reusedTheodore Ts'o
Otherwise, we can end up having data corruption because the blocks could get reused and then discarded! https://bugzilla.kernel.org/show_bug.cgi?id=15579 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-04-20[LogFS] Split large truncated into smaller chunksJoern Engel
Truncate would do an almost limitless amount of work without invoking the garbage collector in between. Split it up into more manageable, though still large, chunks. Signed-off-by: Joern Engel <joern@logfs.org>
2010-04-20Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: quota: Convert __DQUOT_PARANOIA symbol to standard config option
2010-04-20quota: Convert __DQUOT_PARANOIA symbol to standard config optionJan Kara
Make __DQUOT_PARANOIA define from the old days a standard config option and turn it off by default. This gets rid of a quota warning about writes before quota is turned on for systems with ext4 root filesystem. Currently there's no way to legally solve this because /etc/mtab has to be written before quota is turned on on most systems. Signed-off-by: Jan Kara <jack@suse.cz>
2010-04-20Merge branch 'urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: fix error handling in cm4000_cs.c drivers/pcmcia: Add missing local_irq_restore serial_cs: MD55x support (PCMCIA GPRS/EDGE modem) (kernel 2.6.33) pcmcia: avoid late calls to pccard_validate_cis pcmcia: fix ioport size calculation in rsrc_nonstatic pcmcia: re-start on MFC override pcmcia: fix io_probe due to parent (PCI) resources pcmcia: use previously assigned IRQ for all card functions
2010-04-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix hardirq tracing in trap return path. sparc64: Use correct pt_regs in decode_access_size() error paths. sparc64: Fix PREEMPT_ACTIVE value. sparc64: Run NMIs on the hardirq stack. sparc64: Allocate sufficient stack space in ftrace stubs. sparc: Fix forgotten kmemleak headers inclusion
2010-04-20Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Fix unsafe frame rewinding with hot regs fetching
2010-04-20Merge branch 'drm-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: delay vblank cleanup until after driver unload
2010-04-20x86: correctly wire up the newuname system callChristoph Hellwig
Before commit e28cbf22933d0c0ccaf3c4c27a1a263b41f73859 ("improve sys_newuname() for compat architectures") 64-bit x86 had a private implementation of sys_uname which was just called sys_uname, which other architectures used for the old uname. Due to some merge issues with the uname refactoring patches we ended up calling the old uname version for both the old and new system call slots, which lead to the domainname filed never be set which caused failures with libnss_nis. Reported-and-tested-by: Andy Isaacson <adi@hexapodia.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-20KVM: Increase NR_IOBUS_DEVS limit to 200Sridhar Samudrala
This patch increases the current hardcoded limit of NR_IOBUS_DEVS from 6 to 200. We are hitting this limit when creating a guest with more than 1 virtio-net device using vhost-net backend. Each virtio-net device requires 2 such devices to service notifications from rx/tx queues. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-20KVM: fix the handling of dirty bitmaps to avoid overflowsTakuya Yoshikawa
Int is not long enough to store the size of a dirty bitmap. This patch fixes this problem with the introduction of a wrapper function to calculate the sizes of dirty bitmaps. Note: in mark_page_dirty(), we have to consider the fact that __set_bit() takes the offset as int, not long. Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-04-20KVM: MMU: fix kvm_mmu_zap_page() and its calling pathXiao Guangrong
This patch fix: - calculate zapped page number properly in mmu_zap_unsync_children() - calculate freeed page number properly kvm_mmu_change_mmu_pages() - if zapped children page it shoud restart hlist walking KVM-Stable-Tag. Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-04-20KVM: VMX: Save/restore rflags.vm correctly in real modeAvi Kivity
Currently we set eflags.vm unconditionally when entering real mode emulation through virtual-8086 mode, and clear it unconditionally when we enter protected mode. The means that the following sequence KVM_SET_REGS (rflags.vm=1) KVM_SET_SREGS (cr0.pe=1) Ends up with rflags.vm clear due to KVM_SET_SREGS triggering enter_pmode(). Fix by shadowing rflags.vm (and rflags.iopl) correctly while in real mode: reads and writes to those bits access a shadow register instead of the actual register. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-04-20KVM: allow bit 10 to be cleared in MSR_IA32_MC4_CTLAndre Przywara
There is a quirk for AMD K8 CPUs in many Linux kernels (see arch/x86/kernel/cpu/mcheck/mce.c:__mcheck_cpu_apply_quirks()) that clears bit 10 in that MCE related MSR. KVM can only cope with all zeros or all ones, so it will inject a #GP into the guest, which will let it panic. So lets add a quirk to the quirk and ignore this single cleared bit. This fixes -cpu kvm64 on all machines and -cpu host on K8 machines with some guest Linux kernels. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-20KVM: Don't spam kernel log when injecting exceptions due to bad cr writesAvi Kivity
These are guest-triggerable. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-20KVM: SVM: Fix memory leaks that happen when svm_create_vcpu() failsTakuya Yoshikawa
svm_create_vcpu() does not free the pages allocated during the creation when it fails to complete the allocations. This patch fixes it. Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-20KVM: take srcu lock before call to complete_pio()Gleb Natapov
complete_pio() may use slot table which is protected by srcu. Signed-off-by: Gleb Natapov <gleb@redhat.com> Cc: stable@kernel.org Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-20sparc64: Fix hardirq tracing in trap return path.David S. Miller
We can overflow the hardirq stack if we set the %pil here so early, just let the normal control flow do it. This is fine as we are allowed to do the actual IRQ enable at any point after we call trace_hardirqs_on. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-20Input: eeti_ts - cancel pending work when going to suspendDaniel Mack
This fixes a race between the suspend code and input events. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-20Input: Add support of Synaptics Clickpad deviceTakashi Iwai
The new type of touchpads can be detected via a new query command 0x0c. The clickpad flags are in cap[0]:4 and cap[1]:0 bits. When the device is detected, the driver now reports only the left button as the supported buttons so that X11 driver can detect that the device is Clickpad. A Clickpad device gives the button events only as the middle button. The kernel driver morphs to the left button. The real handling of Clickpad is done rather in X driver side. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-20Revert "Input: ALPS - add signature for HP Pavilion dm3 laptops"Dmitry Torokhov
This reverts commit 5e28d8eb68c12eab9c4a47b42ba993a6420d71d3 since the magic knock does not work for this model of the touchpad and the device stays in PS/2 compatibility mode.
2010-04-20drm: delay vblank cleanup until after driver unloadJesse Barnes
Drivers may use vblank calls now (e.g. drm_vblank_off) in their unload paths, so don't clean up the vblank related structures until after driver unload. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Kristian Høgsberg <krh@bitplanet.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-19powerpc: 2.6.34 update of defconfigs for embedded 6xx/7xxx, 8xx, 8xxxKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-19powerpc/mpc8xxx defconfigs - turn off SYSFS_DEPRECATEDKim Phillips
a recent fc11 udev update on an 83xx board made root console login disappear: Updating : udev-141-8.fc11.ppc 32/83 udev: starting version 141 udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly and sure enough, turning off SYSFS_DEPRECATED brings the login prompt back. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-19powerpc/83xx: configure SIL SATA driver in 83xx-wide defconfigKim Phillips
to enable the storage controller on earlier rev. mpc834x itx boards. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-20md/raid5: allow for more than 2^31 chunks.NeilBrown
With many large drives and small chunk sizes it is possible to create a RAID5 with more than 2^31 chunks. Make sure this works. Reported-by: Brett King <king.br@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@kernel.org
2010-04-19powerpc/83xx: enable EPOLL syscall in defconfigKim Phillips
83xx users looking to run apache will experience this error: /var/log/apache2/error.log: [emerg] (38)Function not implemented: Couldn't create pollset in child; check system or user limits enabling CONFIG_EPOLL in kernel config fixes this so apache can run. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-19powerpc/83xx: add RTC drivers in 83xx defconfigKim Phillips
83xx boards typically have the DS1307 or DS1374: git grep RTC_DRV arch/powerpc/configs/*83* | grep "=y" arch/powerpc/configs/83xx/asp8347_defconfig:CONFIG_RTC_DRV_DS1374=y arch/powerpc/configs/83xx/mpc8313_rdb_defconfig:CONFIG_RTC_DRV_DS1307=y arch/powerpc/configs/83xx/mpc8315_rdb_defconfig:CONFIG_RTC_DRV_DS1307=y arch/powerpc/configs/83xx/mpc832x_mds_defconfig:CONFIG_RTC_DRV_DS1374=y arch/powerpc/configs/83xx/mpc834x_itx_defconfig:CONFIG_RTC_DRV_DS1307=y arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig:CONFIG_RTC_DRV_DS1307=y arch/powerpc/configs/83xx/mpc834x_mds_defconfig:CONFIG_RTC_DRV_DS1374=y arch/powerpc/configs/83xx/mpc836x_mds_defconfig:CONFIG_RTC_DRV_DS1374=y Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-19powerpc/fsl-cpm: Configure clock correctly for SCCWolfgang Ocker
Some board setup functions call cpm1_clk_setup() or cmp2_clk_setup() to configure the clock source. If CPM_CLK_RTX has been used for the parameter mode, the clock has been configured only for TX but not for RX. With this patch CPM_CLK_RTX configures the clock for both directions correctly. Signed-off-by: Wolfgang Ocker <weo@reccoware.de> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-19powerpc/fsl_booke: Correct test for MMU_FTR_BIG_PHYSBecky Bruce
The code was looking for this in cpu_features, not mmu_features. Fix this. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-19powerpc/85xx/86xx: Fix build w/ CONFIG_PCI=nAnton Vorontsov
Currently some MPC85xx and MPC86xx boards fail to build without CONFIG_PCI: arch/powerpc/platforms/fsl_uli1575.c: In function 'quirk_final_uli5249': arch/powerpc/platforms/fsl_uli1575.c:234: error: implicit declaration of function 'pci_bus_for_each_resource' arch/powerpc/platforms/fsl_uli1575.c:234: error: expected ';' before '{' token cc1: warnings being treated as errors arch/powerpc/platforms/fsl_uli1575.c:223: warning: unused variable 'dummy' make[1]: *** [arch/powerpc/platforms/fsl_uli1575.o] Error 1 This patch fixes the issue by appending 'if PCI' condition when selecting FSL_ULI1575 Kconfig symbol. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-20i2c-stu300: off by one issueDan Carpenter
If we don't find the correct rate, we want to end the loop with "i" pointing to the last element in the array. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-04-20i2c-pnx: Add stop conditions for end of transferKevin Wells
Add a stop condition bit flag to the last byte in the transfer. This will generate an extra clock to handle the stop condition and prevent devices from staying in an ACK'd state. Signed-off-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
generated by cgit (git 2.34.1) at 2025-09-13 00:12:54 +0000