| Age | Commit message (Collapse) | Author |
|---|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Last minute patch for correct the pasue/resume operation with IPC4. The
issues are hardto reproduce and needs extended stress testing to be hit,
in which case the audio breaks due to DMA errors.
|
|
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Simplify IPC messages to avoid passing a reply structure that is not
used later.
|
|
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Preparation of ALC712 support with different types of SoundWire
devices per link, new RaptorLake SoundWire device, better error
handling for Cirrus devices and cosmetic changes for Max98373.
Bard Liao (3):
ASoC: Intel: sof_sdw: set codec_num = 1 if the device is not
aggregated
ASoC: Intel: sof_sdw: support different devices on the same sdw link
ASoC: Intel: sof_sdw: append codec type to dai link name
Curtis Malainey (1):
ASoC: Intel: sof_cirrus_common: Guard against missing buses
Yong Zhi (2):
ASoC: Intel: sof_sdw: remove late_probe flag in struct
sof_sdw_codec_info
ASoC: Intel: sof_sdw_max98373: change sof_sdw_mx8373_late_probe to
static call
apoorv (1):
ASoC: Intel: soc-acpi: Add entry for rt711-sdca-sdw at link 2 in RPL
match table
sound/soc/intel/boards/sof_cirrus_common.c | 7 +-
sound/soc/intel/boards/sof_sdw.c | 181 ++++++++++++------
sound/soc/intel/boards/sof_sdw_common.h | 3 -
sound/soc/intel/boards/sof_sdw_max98373.c | 22 +--
.../intel/common/soc-acpi-intel-rpl-match.c | 17 +-
5 files changed, 152 insertions(+), 78 deletions(-)
--
2.37.2
|
|
cs35l56_mbox_send() logs a warning when sending a mbox command fails so
the callers can be simplified.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230420102043.1151830-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The es8316 driver uses a register range to specify the single volatile
register it has. While the cost will be in the noise this is a bunch of
overhead compared to just having a volatile_reg() callback so switch to
the callback.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230419-asoc-es8316-volatile-v1-1-2074ec93d8f1@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Suspending to S0iX with IPC3 requires the PM_GATE IPC to be sent again
to stop the DMA trace. But with IPC4, this is not needed as the trace is
stopped with the LARGE_CONFIG_SET IPC. Also, sending the MOD_D0IX IPC to
set the D0I3 state again when the DSP is in D0I3 already results in an
imbalance in PM runtime states in the firmware. So split the
set_power_state ops for IPC3 and IPC4 to avoid sending the MOD_D0IX IPC
when the DSP is already in D0I3 with IPC4.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230420104714.29573-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In the case of IPC4, a pipeline is only paused during STOP/PAUSE/SUSPEND
triggers and the FW keeps the host DMA running when a pipeline is
paused. The start/stop tests iterate through STOP/START triggers without
involving a hw_free. This means that the pipeline state will only toggle
between PAUSED (during the STOP trigger) and RUNNING (during the START
trigger). So this test should be treated in the same way as a
PAUSE_PUSH/PAUSE_RELEASE test and the DMA should be kept running when
toggling the pipeline states between PAUSED and RUNNING.
Since there is no way to tell if a STOP trigger will be followed by hw_free
or not, this patch proposes to always skip DMA stop during the STOP trigger
and handle it later during hw_free. Introduce a new flag in struct
sof_ipc_pcm_ops, delayed_platform_trigger, that will be used to ensure that
the host DMA will not be stopped during the STOP/PAUSE/RELEASE triggers
and set it for IPC4. The platform_trigger call to stop the DMA will be
invoked during PCM hw_free instead when the pipeline is reset.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230420114137.27613-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The FW does not pause/stop the host DMA during pause and stopping the
host DMA from the driver could result in an unknown behaviour. So, skip
triggering the HD-Audio host DMA during pause/release.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230420114137.27613-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The existing sdw_sof machine driver constructs two SoundWire interfaces
by direction and sdw link id. It means that we will have exactly the
same dai link name if two dai links are on the same sdw link with the
same direction.
The new Realtek codec has two SoundWire interfaces for jack and DMIC
functions and they are treated as different codecs. To create two dai
links for jack and DMIC, we need to have different dai link names.
This patch suggests to append codec type if there are two or more
different types of devices on the same sdw bus.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230419195524.46995-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The existing code assumes all devices on the same soundwire link
are the same devices. eg. all rt1316. This commit removes the
assumption and supports different devices on the same soundwire link.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230419195524.46995-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We assume adr_link->num_adr = 1 if a device is not aggregated. However,
the assumption is not valid if there are different type devices on the
same soundwire link.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230419195524.46995-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sof_sdw_mx8373_late_probe is only used in sof_sdw_max98373,
so it should be static and rename it to 'mx8373_sdw_late_probe'.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230419195524.46995-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Just use codec_card_late_probe ptr in struct sof_sdw_codec_info
for validation check and drop late_probe variable.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230419195524.46995-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
RT711 sdca sdw is added with SDW2 link for RPL-P CRB platform.
Signed-off-by: apoorv <apoorv@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230419195524.46995-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Even if we find a acpi device we can still be missing the physical node.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230419195524.46995-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert all existing calls that pass "NULL, 0" for reply data to the new
no_reply calls. Also convert any calls that pass in data but don't
actually parse the result.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230419194057.42205-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
95% of the calls inside SOF to TX an IPC don't care about a reply. Yet
the previous commit cleaned up a bunch of replies that were being
populated and then thrown away. This adds some functions so users who do
not need replies don't feel obligated to provide the space to the API.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230419194057.42205-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This reverts commit 33683cbf49b54 ("ASoC: fsl: remove unnecessary
dai_link->platform").
dai_link->platform is needed. The platform component is
"snd_dmaengine_pcm", which is registered from cpu driver,
If dai_link->platform is not assigned, then platform
component will not be probed, then there will be issue:
aplay: main:831: audio open error: Invalid argument
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1681900158-17428-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dev_err_probe() already display the error code. There is no need to
duplicate it explicitly in the error message.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/c167c16a535049d56f817bbede9c9f6f0a0f4c68.1681626553.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
These patches make some small changes to align with the B0
silicon revision.
|
|
Rename the mixer source defines from CS35L56_INPUT_SRC_SWIRE_RXn
to CS35L56_INPUT_SRC_SWIRE_DP1_CHANNELn to match the latest
datasheet.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230418144309.1100721-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The mixer source index value for SDW2RX1 is different between
A1 and B0 silicon. As the driver doesn't provide a DAI for SDW2
just remove it as a mixer source option.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230418144309.1100721-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Reduce SDW1 to 4 channels and remove the controls for SDW1
TX5 and TX6.
The TX5 and TX6 channels have been removed from B0 silicon.
There is no need to support them on A1 silicon.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230418144309.1100721-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
EINT20 contains wake-source interrupts and also interface-blocked
interrupts, which all default to unmasked after reset or wake.
The comment in cs35l56_init() only mentioned the wake interrupts.
Update the comment so it's clear that it's intentional to also
mask the *_BLOCKED interrupts.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230418144309.1100721-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace dev_err() in probe() path with dev_err_probe() to:
1. Make code a bit simpler and easier to read,
2. Do not print messages on deferred probe.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230418074630.8681-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The probe already stores pointer to &pdev->dev, so use it to make the
code a bit easier to read.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230418074630.8681-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace dev_err() in probe() path with dev_err_probe() to:
1. Make code a bit simpler and easier to read,
2. Do not print messages on deferred probe.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230418074630.8681-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the WM8728 audio CODEC bindings to DT schema
Signed-off-by: Saalim Quadri <danascape@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230417204323.137681-1-danascape@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
clang build reports
sound/soc/codecs/nau8825.c:2826:31: error: overlapping comparisons
always evaluate to false [-Werror,-Wtautological-overlap-compare]
if (nau8825->adc_delay < 125 && nau8825->adc_delay > 500)
~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
This is a bug, a logical-or should have been used.
Fixes: fc0b096c9291 ("ASoC: nau8825: Add delay control for input path")
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20230418120955.3230705-1-trix@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Code can be a bit simpler with dev_err_probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230417141453.919158-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the WM8737 audio CODEC bindings to DT schema
Signed-off-by: Saalim Quadri <danascape@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230417212400.161796-1-danascape@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Various code improvements. These remove redundant code and
clean up less-than-optimal original implementations.
|
|
of_node_put() should have been done directly after
mqs_priv->regmap = syscon_node_to_regmap(gpr_np);
otherwise it creates a reference leak on the success path.
To fix this, of_node_put() is moved to the correct location, and change
all the gotos to direct returns.
Fixes: a9d273671440 ("ASoC: fsl_mqs: Fix error handling in probe")
Signed-off-by: Liliang Ye <yll@hust.edu.cn>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/20230403152647.17638-1-yll@hust.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
ASoC is using many type of mutex lock, but
some of them has helper function, but some doesn't.
Or, it has helper function, but is static.
This patch-set adds helper function and use it.
|
|
ASoC need to use card->mutex with _INIT or _RUNTIME,
but there is no helper function for it.
This patch adds its helper function and use it.
Because people might misunderstand that _init() is mutex initialization,
this patch renames _INIT to _ROOT and adds new
snd_soc_card_mutex_lock_root() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a5zlx3tw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
soc-pcm.c has snd_soc_dpcm_mutex_lock/unlock(),
but other files can't use it because it is static function.
It requests snd_soc_pcm_runtime as parameter (A), but sometimes we
want to use it by snd_soc_card (B).
(A) static inline void snd_soc_dpcm_mutex_lock(struct snd_soc_pcm_runtime *rtd)
{
mutex_lock_nested(&rtd->card->pcm_mutex, rtd->card->pcm_subclass);
} ^^^^^^^^^
(B) mutex_lock_nested(&card->pcm_mutex, card->pcm_subclass);
^^^^
We want to use it with both "rtd" and "card" for dapm lock/unlock.
To enable it, this patch uses _Generic macro.
This patch makes snd_soc_dpcm_mutex_{un}lock() global function, and use it on
each files.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bkk1x3ud.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
soc.h has snd_soc_dapm_mutex_lock/unlock() definition and
many drivers are using it, but soc-dapm.c is not.
1st reason is snd_soc_dapm_mutex_lock/unlock() requests
snd_soc_dapm_context pointer as parameter (A), but sometimes soc-dapm.c
needs to use snd_soc_card (B).
(A) static inline void snd_soc_dapm_mutex_lock(struct snd_soc_dapm_context *dapm)
{
mutex_lock_nested(&dapm->card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME);
} ^^^^^^^^^^
(B) mutex_lock_nested(&card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME);
^^^^
2nd reason is it want to use SND_SOC_DAPM_CLASS_INIT for mutex_lock_nested(),
but helper is using _RUNTIME (A).
The conclusion is we want to use "dapm vs card" and "_RUNTIME vs _INIT"
for dapm lock/unlock. To enable this selfish request, this patch uses
_Generic macro. We can use snd_soc_dapm_mutex_lock/unlock() for both
dapm and card case.
snd_soc_dapm_mutex_lock(dapm); snd_soc_dapm_mutex_unlock(dapm);
snd_soc_dapm_mutex_lock(card); snd_soc_dapm_mutex_unlock(card);
Current soc-dapm.c is using both mutex_lock() and mutex_lock_nested().
This patch handles mutex_lock() as mutex_lock_nested(..., 0),
in other words, handles below as same.
mutex_lock(&card->dapm_mutex);
mutex_lock_nested(&card->dapm_mutex, SND_SOC_DAPM_CLASS_INIT);
Because people might misunderstand that _init() is mutex initialization,
this patch renames _INIT to _ROOT and adds new
snd_soc_dapm_mutex_lock_root() for it.
This patch also moves snd_soc_dapm_subclass definition from soc-dapm.h
to soc.h to keep related code together.
Because very complex soc.h vs soc-dapm.h relationship,
it is difficult/impossible to define these helper into soc-dapm.h.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87cz4hx3v0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the WM8753 audio codec bindings to DT schema.
Signed-off-by: Saalim Quadri <danascape@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230414223801.1106550-1-danascape@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SSM260x chips have an internal MCLK /2 divider (bit D7 in register
R8). Add logic that allows for more MCLK values using this divider.
Signed-off-by: Paweł Anikiel <pan@semihalf.com>
Link: https://lore.kernel.org/r/20230414140203.707729-7-pan@semihalf.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
cs35l56_remove() always returns 0. Two of the functions that call
it are void and the other one should only return 0. So there's no
point returning anything from cs35l56_remove().
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230414133753.653139-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dsp_ready_completion is redundant and can be replaced by a call
flush_work() to wait for cs35l56_dsp_work() to complete.
As the dsp_work is queued by component_probe() it must run before other
ASoC component callbacks and therefore there is no risk of calling
flush_work() before the dsp_work() has been queued.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230414133753.653139-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Moving the wait from the beginning of the cs35l56_dsp_work() into
cs35l56_component_probe() will prevent the limbo situation that is an
artifact of the two stage SoundWire driver probe and initialisation
where the card is all registered and shows in ALSA but doesn't actually
work because the hardware didn't enumerate.
The other bus drivers perform the probe and init sequentially and are
not susceptible to this issue.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230414133753.653139-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no reason to have such a tight usleep range of 400us and it is
acceptable to allow MIN_US * 2.
Also wrap the usleep in an inline function.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/168147949455.26.3401634900657387799@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The irq member was being set before calling the init function and then
cs35l56_irq_request() was called only when the init was successful.
However cs35l56_release() calls devm_free_irq() when the irq member is
set and therefore if init() fails then this will cause an attempted free
of an unallocated IRQ.
Instead pass the desired IRQ number to the cs35l56_irq_request()
function and set cs35l56->irq only when it has been successfully
allocated.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/168147949598.26.711670799488943454@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Change the original fixed delay to the assignment from property. It will make
more flexible to different platforms for avoiding pop noise at the beginning
of recording.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20230414103941.39566-2-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Change the original fixed delay to the assignment from property. It will make
more flexible to different platforms for avoiding pop noise at the beginning
of recording.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20230414103941.39566-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use devm_clk_get_optional() instead of hand writing it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/51976b2515d7007ba5c8aa7524892f147d7cdd51.1681363691.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
- Configure the default gound switch delay time before enabling IRQ
to avoid the unexpected delay time is set up
- Apply DA7219 AAD own work queue to handle AAD events
- Replace msleep with queue_delayed_work to have better relability
This commit improves the control of ground switches in AAD IRQ
Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20230413024134.8612-1-David.Rau.opensource@dm.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This set of patches adds handling for system suspend.
Patches 1..4 make some code changes that simplify the
suspend implementation, mainly to avoid race conditions.
There are two seperate aspects to suspend, and these have
been done as two patches:
- the main suspend-resume handling,
- re-loading the firmware if necessary after resume.
|
|
Check during cs35l56_system_resume() whether the firmware patch must
be applied again.
The FIRMWARE_MISSING flag in the PROTECTION_STATUS register indicates
whether the firmware has been patched.
In non-secure mode the FIRMWARE_MISSING flag is cleared at the end of
dsp_work(). If it is set after system-resume we know that dsp_work()
must be run again.
In secure mode the pre-OS loader will have done the secure patching
and cleared the FIRMWARE_MISSING flag. So this flag does not tell us
whether firmware memory was lost. But the driver could only be
downloading non-secure tunings, which is always safe to do.
If the driver has control of RESET we will have asserted it during
suspend so the firmware patch will have been lost. The driver would only
have control of RESET in non-secure mode.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/168122674550.26.8545058503709956172@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
