summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-27rtlwifi: btcoex: Get status of multichannel concurrencePing-Ke Shih
btcoex does different decision according to MCC or SCC status, but driver is still SCC currently. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: Add customer_id to do special deal to oem vendorPing-Ke Shih
Add customer_id field in structure, and then this is a clue to implement the behavior defined by vendor LENOVO_CHINA. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: Add enum DM_INFO for btcoex to query dm's countersPing-Ke Shih
btcoex uses dm's counters to check the environment is noisy or not. If it is clean, btcoex set more time slots to WiFi so that it can transmit as soon as possible. That will save time, and BT will have more time slots after WiFi traffic is complete. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: remove redundant statement found by static checkerPing-Ke Shih
smatch reports "rtl_is_special_data() warn: inconsistent indenting", but it is an obvious redundant statement so remove it. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: Add modifier static to functions reported by sparsePing-Ke Shih
sparse reports some functions were not declared, so add 'static' as modifier. Remove an unused function btc8821a1ant_is_wifi_status_changed() exposed due to 'static'. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rsi: fix kernel panic observed on 64bit machineAmitkumar Karwar
Following kernel panic is observed on 64bit machine while loading the driver. It is fixed if we pass dynamically allocated memory to SDIO for DMA. BUG: unable to handle kernel paging request at ffffeb04000172e0 IP: sg_miter_stop+0x56/0x70 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI Modules linked in: rsi_sdio(OE+) rsi_91x(OE) btrsi(OE) rfcomm bluetooth ecdh_generic mac80211 mmc_block fuse xt_CHECKSUM iptable_mangle drm_kms_helper mmc_core serio_raw drm firewire_ohci tg3 CPU: 0 PID: 4003 Comm: insmod Tainted: G OE 4.16.0-rc1+ #27 Hardware name: Dell Inc. Latitude E5500 /0DW634, BIOS A19 06/13/2013 RIP: 0010:sg_miter_stop+0x56/0x70 RSP: 0018:ffff88007d003e78 EFLAGS: 00010002 RAX: 0000000000000003 RBX: 0000000000000004 RCX: 0000000000000000 RDX: ffffeb04000172c0 RSI: ffff88002f58002c RDI: ffff88007d003e80 RBP: 0000000000000004 R08: ffff88007d003e80 R09: 0000000000000008 R10: 0000000000000003 R11: 0000000000000001 R12: 0000000000000004 R13: ffff88002f580028 R14: 0000000000000000 R15: 0000000000000004 FS: 00007f35c29db700(0000) GS:ffff88007d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffeb04000172e0 CR3: 000000007038e000 CR4: 00000000000406f0 Call Trace: <IRQ> sg_copy_buffer+0xc6/0xf0 sdhci_tasklet_finish+0x170/0x260 [sdhci] tasklet_action+0xf4/0x100 __do_softirq+0xef/0x26e irq_exit+0xbe/0xd0 do_IRQ+0x4a/0xc0 common_interrupt+0xa2/0xa2 </IRQ> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rsi: fix error path handling in SDIO probeAmitkumar Karwar
We miss to release IRQ in certain error path in SDIO probe which causes following kernel panic. This patch corrects error path handling BUG: unable to handle kernel NULL pointer dereference at (null) IP: (null) PGD 0 P4D 0 Oops: 0010 [#1] SMP PTI Call Trace: <IRQ> ? call_timer_fn+0x29/0x120 ? run_timer_softirq+0x1da/0x420 ? timer_interrupt+0x11/0x20 ? __do_softirq+0xef/0x26e ? irq_exit+0xbe/0xd0 ? do_IRQ+0x4a/0xc0 ? common_interrupt+0xa2/0xa2 </IRQ> ? cpuidle_enter_state+0x118/0x250 ? do_idle+0x186/0x1e0 ? cpu_startup_entry+0x6f/0x80 ? start_kernel+0x47c/0x49c ? secondary_startup_64+0xa5/0xb0 Fixes: 50117605770c ("rsi: improve RX handling in SDIO interface") Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rsi: remove redundant duplicate assignment of buffer_sizeColin Ian King
Variable buffer_size is re-assigned the same value, this duplicated assignment is redundant and can be removed. Cleans up clang warning: drivers/net/wireless/rsi/rsi_91x_usb.c:140:4: warning: Value stored to 'buffer_size' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27reset: uniphier: add ethernet reset control support for PXs3Kunihiko Hayashi
Add reset lines for ethernet controller on PXs3 SoC. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-03-27reset: stm32mp1: Enable stm32mp1 reset driverGabriel Fernandez
stm32mp1 RCC IP 1 has a reset SET register and a reset CLEAR register. Writing '0' on reset SET register has no effect Writing '1' on reset SET register activates the reset of the corresponding peripheral Writing '0' on reset CLEAR register has no effect Writing '1' on reset CLEAR register releases the reset of the corresponding peripheral See Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-03-27dt-bindings: reset: add STM32MP1 resetsGabriel Fernandez
This patch adds the reset binding entry for STM32MP1 Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-03-27reset: uniphier: add Pro4/Pro5/PXs2 audio systems reset controlKatsuhiro Suzuki
Add reset lines for audio subsystem (AIO) on UniPhier Pro4/Pro5/PXs2 SoCs. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-03-27reset: imx7: add 'depends on HAS_IOMEM' to fix unmet dependencyMasahiro Yamada
This config select's MFD_SYSCON, but does not depend on HAS_IOMEM. Compile testing on architecture without HAS_IOMEM causes "unmet direct dependencies" in Kconfig phase. Detected by "make ARCH=score allyesconfig". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-03-27reset: modify the way reset lookup works for board filesBartosz Golaszewski
Commit 7af1bb19f1d7 ("reset: add support for non-DT systems") introduced reset control lookup mechanism for boards that still use board files. The routine used to register lookup entries takes the corresponding reset_controlled_dev structure as argument. It's been determined however that for the first user of this new interface - davinci psc driver - it will be easier to register the lookup entries using the reset controller device name. This patch changes the way lookup entries are added. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> [p.zabel@pengutronix.de: added missing ERR_PTR] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-03-27reset: add support for non-DT systemsBartosz Golaszewski
The reset framework only supports device-tree. There are some platforms however, which need to use it even in legacy, board-file based mode. An example of such architecture is the DaVinci family of SoCs which supports both device tree and legacy boot modes and we don't want to introduce any regressions. We're currently working on converting the platform from its hand-crafted clock API to using the common clock framework. Part of the overhaul will be representing the chip's power sleep controller's reset lines using the reset framework. This changeset extends the core reset code with a new reset lookup entry structure. It contains data allowing the reset core to associate reset lines with devices by comparing the dev_id and con_id strings. It also provides a function allowing drivers to register lookup entries with the framework. The new lookup function is only called as a fallback in case the of_node field is NULL and doesn't change anything for current users. Tested with a dummy reset driver with several lookup entries. An example lookup table registration from a driver can be found below: static struct reset_control_lookup foobar_reset_lookup[] = { RESET_LOOKUP("foo.0", "foo", 15), RESET_LOOKUP("bar.0", NULL, 5), }; foobar_probe() { ... reset_controller_add_lookup(&rcdev, foobar_reset_lookup, ARRAY_SIZE(foobar_reset_lookup)); ... } Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: David Lechner <david@lechnology.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-03-27drm/i915: Fix hibernation with ACPI S0 target stateImre Deak
After commit dd9f31c7a3887950cbd0d49eb9d43f7a1518a356 Author: Imre Deak <imre.deak@intel.com> Date: Wed Aug 16 17:46:07 2017 +0300 drm/i915/gen9+: Set same power state before hibernation image save/restore during hibernation/suspend the power domain functionality got disabled, after which resume could leave it incorrectly disabled if the ACPI target state was S0 during suspend and i915 was not loaded by the loader kernel. This was caused by not considering if we resumed from hibernation as the condition for power domains reiniting. Fix this by simply tracking if we suspended power domains during system suspend and reinit power domains accordingly during resume. This will result in reiniting power domains always when resuming from hibernation, regardless of the platform and whether or not i915 is loaded by the loader kernel. The reason we didn't catch this earlier is that the enabled/disabled state of power domains during PMSG_FREEZE/PMSG_QUIESCE is platform and kernel config dependent: on my SKL the target state is S4 during PMSG_FREEZE and (with the driver loaded in the loader kernel) S0 during PMSG_QUIESCE. On the reporter's machine it's S0 during PMSG_FREEZE but (contrary to this) power domains are not initialized during PMSG_QUIESCE since i915 is not loaded in the loader kernel, or it's loaded but without the DMC firmware being available. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105196 Reported-and-tested-by: amn-bas@hotmail.com Fixes: dd9f31c7a388 ("drm/i915/gen9+: Set same power state before hibernation image save/restore") Cc: amn-bas@hotmail.com Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180322143642.26883-1-imre.deak@intel.com (cherry picked from commit 0f90603c33bdf6575cfdc81edd53f3f13ba166fb) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-03-27drm/i915/execlists: Use a locked clear_bit() for synchronisation with interruptChris Wilson
We were relying on the uncached reads when processing the CSB to provide ourselves with the serialisation with the interrupt handler (so we could detect new interrupts in the middle of processing the old one). However, in commit 767a983ab255 ("drm/i915/execlists: Read the context-status HEAD from the HWSP") those uncached reads were eliminated (on one path at least) and along with them our serialisation. The result is that we would very rarely miss notification of a new interrupt and leave a context-switch unprocessed, hanging the GPU. Fixes: 767a983ab255 ("drm/i915/execlists: Read the context-status HEAD from the HWSP") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180321091027.21034-1-chris@chris-wilson.co.uk (cherry picked from commit 9153e6b7c85edbc89e874e5c83f86217c53dcfaf) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-03-27drm/i915: Specify which engines to reset following semaphore/event lockupsChris Wilson
If the GPU is stuck waiting for an event or for a semaphore, we need to reset the GPU in order to recover. We have to tell the reset routine which engines we want reset, but we were still using the old interface and declaring it as "not-fatal". Fixes: 14b730fcb8d9 ("drm/i915/tdr: Prepare error handler to accept mask of hung engines") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180320100449.1360-1-chris@chris-wilson.co.uk (cherry picked from commit ca98317b89428e6ac17be0938b467ed78654dd56) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-03-27drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.Dhinakaran Pandiyan
If bios sets up an MST output and hardware state readout code sees this is an SST configuration, when disabling the encoder we end up calling ->post_disable_dp() hook instead of the MST version. Consequently, we write to the DP_SET_POWER dpcd to set it D3 state. Further along when we try enable the encoder in MST mode, POWER_UP_PHY transaction fails to power up the MST hub. This results in continuous link training failures which keep the system busy delaying boot. We could identify bios MST boot discrepancy and handle it accordingly but a simple way to solve this is to write to the DP_SET_POWER dpcd for MST too. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105470 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reported-by: Laura Abbott <labbott@redhat.com> Cc: stable@vger.kernel.org Fixes: 5ea2355a100a ("drm/i915/mst: Use MST sideband message transactions for dpms control") Tested-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180314054825.1718-1-dhinakaran.pandiyan@intel.com (cherry picked from commit ad260ab32a4d94fa974f58262f8000472d34fd5b) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-03-27rsi: Remove stack VLA usageTobin C. Harding
The use of stack Variable Length Arrays needs to be avoided, as they can be a vector for stack exhaustion, which can be both a runtime bug (kernel Oops) or a security flaw (overwriting memory beyond the stack). Also, in general, as code evolves it is easy to lose track of how big a VLA can get. Thus, we can end up having runtime failures that are hard to debug. As part of the directive[1] to remove all VLAs from the kernel, and build with -Wvla. Currently rsi code uses a VLA based on a function argument to `rsi_sdio_load_data_master_write()`. The function call chain is Both these functions rsi_sdio_reinit_device() rsi_probe() start the call chain: rsi_hal_device_init() rsi_load_fw() auto_fw_upgrade() ping_pong_write() rsi_sdio_load_data_master_write() [Without familiarity with the code] it appears that none of the 4 locks mutex rx_mutex tx_mutex tx_bus_mutex are held when `rsi_sdio_load_data_master_write()` is called. It is therefore safe to use kmalloc with GFP_KERNEL. We can avoid using the VLA by using `kmalloc()` and free'ing the memory on all exit paths. Change buffer from 'u8 array' to 'u8 *'. Call `kmalloc()` to allocate memory for the buffer. Using goto statement to call `kfree()` on all return paths. It can be expected that this patch will result in a small increase in overhead due to the use of `kmalloc()` however this code is only called on initialization (and re-initialization) so this overhead should not degrade performance. [1] https://lkml.org/lkml/2018/3/7/621 Signed-off-by: Tobin C. Harding <me@tobin.cc> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27mwifiex: remove warnings in mwifiex_cmd_append_11n_tlv()Ganapathi Bhat
Fix the following sparse warning in mwifiex_cmd_append_11n_tlv: drivers/net/wireless/marvell/mwifiex/11n.c:358:65: warning: invalid assignment: &= drivers/net/wireless/marvell/mwifiex/11n.c:358:65: left side has type restricted __le16 drivers/net/wireless/marvell/mwifiex/11n.c:358:65: right side has type int drivers/net/wireless/marvell/mwifiex/11n.c:360:65: warning: invalid assignment: &= drivers/net/wireless/marvell/mwifiex/11n.c:360:65: left side has type restricted __le16 drivers/net/wireless/marvell/mwifiex/11n.c:360:65: right side has type int drivers/net/wireless/marvell/mwifiex/11n.c:366:65: warning: invalid assignment: &= drivers/net/wireless/marvell/mwifiex/11n.c:366:65: left side has type restricted __le16 drivers/net/wireless/marvell/mwifiex/11n.c:366:65: right side has type int drivers/net/wireless/marvell/mwifiex/11n.c:368:65: warning: invalid assignment: &= drivers/net/wireless/marvell/mwifiex/11n.c:368:65: left side has type restricted __le16 drivers/net/wireless/marvell/mwifiex/11n.c:368:65: right side has type int Fixes: 77423fa73927 ("mwifiex: fix incorrect ht capability problem") Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27wireless: Use octal not symbolic permissionsJoe Perches
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27Revert "dt-bindings: ifc: Fix the unit address format in the examples"Fabio Estevam
This reverts commit 4e017f1419397473cf3db6e9fa020013998b1aa4. As explained by Rob Herring: "This "fix" is wrong. Memory controllers with chip selects should have the chip select in the unit-address. The correct fix here is you should drop "simple-bus"." Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-27Revert "arm64: dts: fsl: fix ifc simple-bus unit address format warnings"Fabio Estevam
This reverts commit f81d7af7957539b7808961f929f945381530acb9. As explained by Rob Herring: "This "fix" is wrong. Memory controllers with chip selects should have the chip select in the unit-address. The correct fix here is you should drop "simple-bus"." Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-27tools/thermal: tmon: fix for segfaultFrank Asseg
Fixes a segfault occurring when e.g. <TAB> is pressed multiple times in the ncurses tmon application. The segfault is caused by incrementing cur_thermal_record in the main function without checking if it's value reached NR_THERMAL_RECORD immediately. Since the boundary check only occurred in update_thermal_data a race condition existed, which lead to an attempted read beyond the last element of the trec array. The fix was implemented by moving the cur_thermal_record incrementation to the update_thermal_data function using a temporary variable on which the boundary condition is checked before updating cur_thread_record, so that the variable is never incremented beyond the trec array's boundary. It seems the segfault does not occur on every machine: On a HP EliteBook G4 the segfault happens, while it does not happen on a Thinkpad T540p. Signed-off-by: Frank Asseg <frank.asseg@objecthunter.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-03-27net: Spelling s/stucture/structure/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-03-27edd: don't spam log if no EDD information is presentJohannes Thumshirn
We've had reports from users being concerned about messages like: [ 4.487246] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 4.487251] EDD information not available. While these are more or less irrelevant, tell edd.c to not annoy anyone. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-03-27Documentation: Fix early-microcode.txt references after file renameJaak Ristioja
The file Documentation/x86/early-microcode.txt was renamed to Documentation/x86/microcode.txt in 0e3258753f81, but it was still referenced by its old name in a three places: * Documentation/x86/00-INDEX * arch/x86/Kconfig * arch/x86/kernel/cpu/microcode/amd.c This commit updates these references accordingly. Fixes: 0e3258753f81 ("x86/microcode: Document the three loading methods") Signed-off-by: Jaak Ristioja <jaak@ristioja.ee> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-03-27tracing: Block comments should align the * on each lineRohit Visavalia
Resolved Block comments use * on subsequent lines checkpatch warning. Issue found by checkpatch. Signed-off-by: Rohit Visavalia <rohit.visavalia@softnautics.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-03-27treewide: Fix typos in printkMasanari Iida
This patch fixes spelling typos found in printk. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-03-27GenWQE: Fix a typo in two commentsMarkus Elfring
Add a missing character in two words of these descriptions. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Frank Haverkamp <haver@linux.vnet.ibm.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-03-27x86/alternatives: Fixup alternative_call_2Alexey Dobriyan
The following pattern fails to compile while the same pattern with alternative_call() does: if (...) alternative_call_2(...); else alternative_call_2(...); as it expands into if (...) { }; <=== else { }; Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20180114120504.GA11368@avx2
2018-03-27Merge tag 'drm-amdkfd-fixes-2018-03-25' of ↵Dave Airlie
git://people.freedesktop.org/~gabbayo/linux into drm-fixes - Programming VMID correctly for scratch memory with HWS - deallocating SDMA queues correctly in various situations * tag 'drm-amdkfd-fixes-2018-03-25' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: Deallocate SDMA queues correctly drm/amdkfd: Fix scratch memory with HWS enabled
2018-03-27Bluetooth: btrsi: rework dependenciesArnd Bergmann
The linkage between the bluetooth driver and the wireless driver is not defined properly, leading to build problems such as: warning: (BT_HCIRSI) selects RSI_COEX which has unmet direct dependencies (NETDEVICES && WLAN && WLAN_VENDOR_RSI && BT_HCIRSI && RSI_91X) drivers/net/wireless/rsi/rsi_91x_main.o: In function `rsi_read_pkt': (.text+0x205): undefined reference to `rsi_bt_ops' As the dependency is actually the reverse (RSI_91X uses the BT_RSI driver, not the other way round), this changes the dependency to match, and enables the bluetooth driver from the RSI_COEX symbol. Fixes: 38aa4da50483 ("Bluetooth: btrsi: add new rsi bluetooth driver") Acked-by; Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 4.17. Major changes: wil6210 * support multiple virtual interfaces
2018-03-27x86/mm/32: Remove unused node_memmap_size_bytes() & ↵David Rientjes
CONFIG_NEED_NODE_MEMMAP_SIZE logic node_memmap_size_bytes() has been unused since the v3.9 kernel, so remove it. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Fixes: f03574f2d5b2 ("x86-32, mm: Rip out x86_32 NUMA remapping code") Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1803262325540.256524@chino.kir.corp.google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-27Merge tag 'v4.16-rc7' into x86/mm, to fix up conflictIngo Molnar
Conflicts: arch/x86/mm/init_64.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-27perf/x86/intel: Fix linear IP of PEBS real_ip on Haswell and later CPUsStephane Eranian
this patch fix a bug in how the pebs->real_ip is handled in the PEBS handler. real_ip only exists in Haswell and later processor. It is actually the eventing IP, i.e., where the event occurred. As opposed to the pebs->ip which is the PEBS interrupt IP which is always off by one. The problem is that the real_ip just like the IP needs to be fixed up because PEBS does not record all the machine state registers, and in particular the code segement (cs). This is why we have the set_linear_ip() function. The problem was that set_linear_ip() was only used on the pebs->ip and not the pebs->real_ip. We have profiles which ran into invalid callstacks because of this. Here is an example: ..... 0: ffffffffffffff80 recent entry, marker kernel v ..... 1: 000000000040044d <= user address in kernel space! ..... 2: fffffffffffffe00 marker enter user v ..... 3: 000000000040044d ..... 4: 00000000004004b6 oldest entry Debugging output in get_perf_callchain(): [ 857.769909] CALLCHAIN: CPU8 ip=40044d regs->cs=10 user_mode(regs)=0 The problem is that the kernel entry in 1: points to a user level address. How can that be? The reason is that with PEBS sampling the instruction that caused the event to occur and the instruction where the CPU was when the interrupt was posted may be far apart. And sometime during that time window, the privilege level may change. This happens, for instance, when the PEBS sample is taken close to a kernel entry point. Here PEBS, eventing IP (real_ip) captured a user level instruction. But by the time the PMU interrupt fired, the processor had already entered kernel space. This is why the debug output shows a user address with user_mode() false. The problem comes from PEBS not recording the code segment (cs) register. The register is used in x86_64 to determine if executing in kernel vs user space. This is okay because the kernel has a software workaround called set_linear_ip(). But the issue in setup_pebs_sample_data() is that set_linear_ip() is never called on the real_ip value when it is available (Haswell and later) and precise_ip > 1. This patch fixes this problem and eliminates the callchain discrepancy. The patch restructures the code around set_linear_ip() to minimize the number of times the IP has to be set. Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: kan.liang@intel.com Link: http://lkml.kernel.org/r/1521788507-10231-1-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-27objtool: Add Clang supportJosh Poimboeuf
Since the ORC unwinder was made the default on x86_64, Clang-built defconfig kernels have triggered some new objtool warnings: drivers/gpu/drm/i915/i915_gpu_error.o: warning: objtool: i915_error_printf()+0x6c: return with modified stack frame drivers/gpu/drm/i915/intel_display.o: warning: objtool: pipe_config_err()+0xa6: return with modified stack frame The problem is that objtool has never seen clang-built binaries before. Shockingly enough, objtool is apparently able to follow the code flow mostly fine, except for one instruction sequence. Instead of a LEAVE instruction, clang restores RSP and RBP the long way: 67c: 48 89 ec mov %rbp,%rsp 67f: 5d pop %rbp Teach objtool about this new code sequence. Reported-and-test-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/fce88ce81c356eedcae7f00ed349cfaddb3363cc.1521741586.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-27ALSA: aloop: Mark paused device as inactiveRobert Rosengren
Show paused ALSA aloop device as inactive, i.e. the control "PCM Slave Active" set as false. Notification sent upon state change. This makes it possible for client capturing from aloop device to know if data is expected. Without it the client expects data even if playback is paused. Signed-off-by: Robert Rosengren <robert.rosengren@axis.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-27perf/x86: Update rdpmc_always_available static key to the modern APIDavidlohr Bueso
No changes in refcount semantics -- use DEFINE_STATIC_KEY_FALSE() for initialization and replace: static_key_slow_inc|dec() => static_branch_inc|dec() static_key_false() => static_branch_unlikely() Added a '_key' suffix to rdpmc_always_available, for better self-documentation. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Link: http://lkml.kernel.org/r/20180326210929.5244-5-dave@stgolabs.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-27sched/core: Update preempt_notifier_key to modern APIDavidlohr Bueso
No changes in refcount semantics, use DEFINE_STATIC_KEY_FALSE() for initialization and replace: static_key_slow_inc|dec() => static_branch_inc|dec() static_key_false() => static_branch_unlikely() Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Link: http://lkml.kernel.org/r/20180326210929.5244-4-dave@stgolabs.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-26ext4: add validity checks for bitmap block numbersTheodore Ts'o
An privileged attacker can cause a crash by mounting a crafted ext4 image which triggers a out-of-bounds read in the function ext4_valid_block_bitmap() in fs/ext4/balloc.c. This issue has been assigned CVE-2018-1093. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199181 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1560782 Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2018-03-26Input: xpad - add PDP device id 0x02a4Francis Therien
Adds support for a PDP Xbox One controller with device ID (0x06ef:0x02a4). The Product string for this device is "PDP Wired Controller for Xbox One - Stealth Series | Phantom Black". Signed-off-by: Francis Therien <frtherien@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-26Input: alps - report pressure of v3 and v7 trackstickPali Rohár
ALPS v3 and v7 packet formats reports trackstick pressure. This information is already parsed in unused "z" variable. ALPS SS4 S2 devices already reports trackstick pressure as ABS_PRESSURE attribute, therefore reports pressure in the same way also for v3 and v7. This patch also updates parsing v3 pressure information, it is also stored in 7 bits. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-26Input: pxrc - new driver for PhoenixRC Flight Controller AdapterMarcus Folkesson
This driver let you plug in your RC controller to the adapter and use it as input device in various RC simulators. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-26Input: usbtouchscreen - do not rely on input_dev->usersMarcus Folkesson
If the device is unused and suspended, a call to open will cause the device to autoresume through the call to usb_autopm_get_interface(). input_dev->users is already incremented by the input subsystem, therefore this expression will always be evaluated to true: if (input->users || usbtouch->type->irq_always) result = usb_submit_urb(usbtouch->irq, GFP_NOIO); The same URB will then be fail when resubmitted in usbtouch_open(). Introduce usbtouch->is_open to keep track of the state instead. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-26Input: usbtouchscreen - fix deadlock in autosuspendMarcus Folkesson
usb_autopm_get_interface() that is called in usbtouch_open() does an autoresume if the device is suspended. input_dev->mutex used in usbtouch_resume() is in this case already taken by the input subsystem and will cause a deadlock. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-26Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2018-03-26 This patch series adds the ice driver, which will support the Intel(R) E800 Series of network devices. This is the first phase in the release of this driver where we implement basic transmit and receive. The idea behind the multi-phase release is to aid in code review as well as testing. Subsequent phases will implement advanced features (like SR-IOV, tunnelling, flow director, QoS, etc.) that build upon the previous phase(s). Each phase will be submitted as a patch series. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26i40e: add support for XDP_REDIRECTBjörn Töpel
The driver now acts upon the XDP_REDIRECT return action. Two new ndos are implemented, ndo_xdp_xmit and ndo_xdp_flush. XDP_REDIRECT action enables XDP program to redirect frames to other netdevs. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit (git 2.34.1) at 2025-09-18 10:08:00 +0000