| Age | Commit message (Collapse) | Author |
|---|
|
Add sparse memory vmemmap support for LoongArch. SPARSEMEM_VMEMMAP uses a
virtually mapped memmap to optimise pfn_to_page and page_to_pfn
operations. This is the most efficient option when sufficient kernel
resources are available.
Link: https://lkml.kernel.org/r/20221027125253.3458989-3-chenhuacai@loongson.cn
Signed-off-by: Min Zhou <zhoumin@loongson.cn>
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Cc: Xuerui Wang <kernel@xen0n.name>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/sparse-vmemmap: Generalise helpers and enable for
LoongArch", v14.
This series is in order to enable sparse-vmemmap for LoongArch. But
LoongArch cannot use generic helpers directly because MIPS&LoongArch need
to call pgd_init()/pud_init()/pmd_init() when populating page tables. So
we adjust the prototypes of p?d_init() to make generic helpers can call
them, then enable sparse-vmemmap with generic helpers, and to be further,
generalise vmemmap_populate_hugepages() for ARM64, X86 and LoongArch.
This patch (of 4):
We are preparing to add sparse vmemmap support to LoongArch. MIPS and
LoongArch need to call pgd_init()/pud_init()/pmd_init() when populating
page tables, so adjust their prototypes to make generic helpers can call
them.
NIOS2 declares pmd_init() but doesn't use, just remove it to avoid build
errors.
Link: https://lkml.kernel.org/r/20221027125253.3458989-1-chenhuacai@loongson.cn
Link: https://lkml.kernel.org/r/20221027125253.3458989-2-chenhuacai@loongson.cn
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Cc: Xuerui Wang <kernel@xen0n.name>
Cc: Min Zhou <zhoumin@loongson.cn>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In certain cases (e.g. when handling a softirq)
__msan_instrument_asm_store(&var, sizeof(var)) may be called with from
within KMSAN runtime, but later the value of @var is used with
!kmsan_in_runtime(), leading to false positives.
Because kmsan_internal_unpoison_memory() doesn't take locks, it should be
fine to call it without kmsan_in_runtime() checks, which fixes the
mentioned false positives.
Link: https://lkml.kernel.org/r/20221128094541.2645890-2-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Lockdep and KMSAN used to play badly together, causing deadlocks when
KMSAN instrumentation of lockdep.c called lockdep functions recursively.
Looks like this is no more the case, and a kernel can run (yet slower)
with both KMSAN and lockdep enabled. This patch should fix false
positives on wq_head->lock->dep_map, which KMSAN used to consider
uninitialized because of lockdep.c not being instrumented.
Link: https://lore.kernel.org/lkml/Y3b9AAEKp2Vr3e6O@sol.localdomain/
Link: https://lkml.kernel.org/r/20221128094541.2645890-1-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Eric Biggers <ebiggers@kernel.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Return value from ptep_get_and_clear_full() directly instead of taking
this in another redundant variable.
Link: https://lkml.kernel.org/r/202211282107437343474@zte.com.cn
Signed-off-by: zhang songyi <zhang.songyi@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
generic_fadvise() sets endbyte = -1 to specify end of file (i.e. if
length == 0 is passed from userspace). Most other callers to
filemap_fdatawrite_range() use LLONG_MAX for this purpose, particularly if
they also call fdatawait_range() (which requires end >= start). For
example, sync_file_range(), vfs_fsync() (where the range is passed down
through per-fs ->fsync() callbacks), filemap_flush(), etc.
generic_fadvise() does not currently wait on writeback, but fix the call
up to be consistent with other callers.
Link: https://lkml.kernel.org/r/20221128155632.3950447-3-bfoster@redhat.com
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "filemap: skip write and wait if end offset precedes start",
v2.
A fix for the odd write and wait behavior described in the patch 1 commit
log. Technically patch 1 could simply remove the check rather than lift
it into the callers, but this seemed a bit more user friendly to me.
Patch 2 is appended after observation that fadvise() interacted poorly
with the v1 patch. This is no longer a problem with v2, making patch 2
purely a cleanup.
This series survived both fstests and ltp regression runs without
observable problems. I had (end < start) warning checks in each relevant
function, with fadvise() being the only caller that triggered them. That
said, I dropped the warnings after testing because there seemed to much
potential for noise from the various other callers.
This patch (of 2):
A call to file[map]_write_and_wait_range() with an end offset that
precedes the start offset but happens to land in the same page can trigger
writeback submission but fails to wait on the submitted page. Writeback
submission occurs because __filemap_fdatawrite_range() passes both offsets
down into write_cache_pages(), which rounds down to page indexes before it
starts processing writeback. However, __filemap_fdatawait_range()
immediately returns if the byte-granular end offset precedes the start
offset.
This behavior was observed in the form of unpredictable latency from a
frequent write and wait call with incorrect parameters. The behavior gave
the impression that the fdatawait path might occasionally fail to wait on
writeback, but further investigation showed the latency was from
write_cache_pages() waiting on writeback state to clear for a page already
under writeback. Therefore, this indicated that fdatawait actually never
waits on writeback in this particular situation.
The byte granular check in __filemap_fdatawait_range() goes all the way
back to the old wait_on_page_writeback() helper. It originally used page
offsets and so would have waited in this problematic case. That changed
to byte granularity file offsets in commit 94004ed726f3 ("kill
wait_on_page_writeback_range"), which subtly changed this behavior. The
check itself has become somewhat redundant since the error checking code
that used to follow the wait loop (at the time of the aforementioned
commit) has now been removed and lifted into the higher level callers.
Therefore, we can restore historical fdatawait behavior by simply removing
the check. Since the current fdatawait behavior has been in place for
quite some time and is consistent with other interfaces that use file
offsets, instead lift the check into the file[map]_write_and_wait_range()
helpers to provide consistent behavior between the write and wait.
Link: https://lkml.kernel.org/r/20221128155632.3950447-1-bfoster@redhat.com
Link: https://lkml.kernel.org/r/20221128155632.3950447-2-bfoster@redhat.com
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This commit adds the writeback mechanism for zsmalloc, analogous to the
zbud allocator. Zsmalloc will attempt to determine the coldest zspage
(i.e least recently used) in the pool, and attempt to write back all the
stored compressed objects via the pool's evict handler.
Link: https://lkml.kernel.org/r/20221128191616.1261026-7-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This adds a new field to zs_pool to store evict handlers for writeback,
analogous to the zbud allocator.
Link: https://lkml.kernel.org/r/20221128191616.1261026-6-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This helps determines the coldest zspages as candidates for writeback.
Link: https://lkml.kernel.org/r/20221128191616.1261026-5-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, zsmalloc has a hierarchy of locks, which includes a pool-level
migrate_lock, and a lock for each size class. We have to obtain both
locks in the hotpath in most cases anyway, except for zs_malloc. This
exception will no longer exist when we introduce a LRU into the zs_pool
for the new writeback functionality - we will need to obtain a pool-level
lock to synchronize LRU handling even in zs_malloc.
In preparation for zsmalloc writeback, consolidate these locks into a
single pool-level lock, which drastically reduces the complexity of
synchronization in zsmalloc.
We have also benchmarked the lock consolidation to see the performance
effect of this change on zram.
First, we ran a synthetic FS workload on a server machine with 36 cores
(same machine for all runs), using
fs_mark -d ../zram1mnt -s 100000 -n 2500 -t 32 -k
before and after for btrfs and ext4 on zram (FS usage is 80%).
Here is the result (unit is file/second):
With lock consolidation (btrfs):
Average: 13520.2, Median: 13531.0, Stddev: 137.5961482019028
Without lock consolidation (btrfs):
Average: 13487.2, Median: 13575.0, Stddev: 309.08283679298665
With lock consolidation (ext4):
Average: 16824.4, Median: 16839.0, Stddev: 89.97388510006668
Without lock consolidation (ext4)
Average: 16958.0, Median: 16986.0, Stddev: 194.7370021336469
As you can see, we observe a 0.3% regression for btrfs, and a 0.9%
regression for ext4. This is a small, barely measurable difference in my
opinion.
For a more realistic scenario, we also tries building the kernel on zram.
Here is the time it takes (in seconds):
With lock consolidation (btrfs):
real
Average: 319.6, Median: 320.0, Stddev: 0.8944271909999159
user
Average: 6894.2, Median: 6895.0, Stddev: 25.528415540334656
sys
Average: 521.4, Median: 522.0, Stddev: 1.51657508881031
Without lock consolidation (btrfs):
real
Average: 319.8, Median: 320.0, Stddev: 0.8366600265340756
user
Average: 6896.6, Median: 6899.0, Stddev: 16.04057355583023
sys
Average: 520.6, Median: 521.0, Stddev: 1.140175425099138
With lock consolidation (ext4):
real
Average: 320.0, Median: 319.0, Stddev: 1.4142135623730951
user
Average: 6896.8, Median: 6878.0, Stddev: 28.621670111997307
sys
Average: 521.2, Median: 521.0, Stddev: 1.7888543819998317
Without lock consolidation (ext4)
real
Average: 319.6, Median: 319.0, Stddev: 0.8944271909999159
user
Average: 6886.2, Median: 6887.0, Stddev: 16.93221781102523
sys
Average: 520.4, Median: 520.0, Stddev: 1.140175425099138
The difference is entirely within the noise of a typical run on zram.
This hardly justifies the complexity of maintaining both the pool lock and
the class lock. In fact, for writeback, we would need to introduce yet
another lock to prevent data races on the pool's LRU, further complicating
the lock handling logic. IMHO, it is just better to collapse all of these
into a single pool-level lock.
Link: https://lkml.kernel.org/r/20221128191616.1261026-4-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There is a lot of provision for flexibility that isn't actually needed or
used. Zswap (the only zpool user) always passes zpool_ops with an .evict
method set. The backends who reclaim only do so for zswap, so they can
also directly call zpool_ops without indirection or checks.
Finally, there is no need to check the retries parameters and bail with
-EINVAL in the reclaim function, when that's called just a few lines below
with a hard-coded 8. There is no need to duplicate the evictable and
sleep_mapped attrs from the driver in zpool_ops.
Link: https://lkml.kernel.org/r/20221128191616.1261026-3-nphamcs@gmail.com
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Implement writeback for zsmalloc", v7.
Unlike other zswap allocators such as zbud or z3fold, zsmalloc currently
lacks the writeback mechanism. This means that when the zswap pool is
full, it will simply reject further allocations, and the pages will be
written directly to swap.
This series of patches implements writeback for zsmalloc. When the zswap
pool becomes full, zsmalloc will attempt to evict all the compressed
objects in the least-recently used zspages.
This patch (of 6):
zswap's customary lock order is tree->lock before pool->lock, because the
tree->lock protects the entries' refcount, and the free callbacks in the
backends acquire their respective pool locks to dispatch the backing
object. zsmalloc's map callback takes the pool lock, so zswap must not
grab the tree->lock while a handle is mapped. This currently only happens
during writeback, which isn't implemented for zsmalloc. In preparation
for it, move the tree->lock section out of the mapped entry section
Link: https://lkml.kernel.org/r/20221128191616.1261026-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20221128191616.1261026-2-nphamcs@gmail.com
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When MADV_PAGEOUT is called on a private file mapping VMA region, we bail
out early if the process is neither owner nor write capable of the file.
However, this VMA may have both private/shared clean pages and private
dirty pages. The opportunity of paging out the private dirty pages (Anon
pages) is missed. Fix this behavior by allowing private file mappings
pageout further and perform the file access check along with PageAnon()
during page walk.
We observe ~10% improvement in zram usage, thus leaving more available
memory on a 4GB RAM system running Android.
[quic_pkondeti@quicinc.com: v2]
Link: https://lkml.kernel.org/r/1669962597-27724-1-git-send-email-quic_pkondeti@quicinc.com
Link: https://lkml.kernel.org/r/1667971116-12900-1-git-send-email-quic_pkondeti@quicinc.com
Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Cc: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
"mm_khugepaged_collapse_file" for capturing is_shmem.
Currently, is_shmem is not being captured. Capturing is_shmem is useful
as it can indicate if tmpfs is being used as a backing store instead of
persistent storage. Add the tracepoint in collapse_file() named
"mm_khugepaged_collapse_file" for capturing is_shmem.
[gautammenghani201@gmail.com: swap is_shmem and addr to save space, per Steven Rostedt]
Link: https://lkml.kernel.org/r/20221202201807.182829-1-gautammenghani201@gmail.com
Link: https://lkml.kernel.org/r/20221026052218.148234-1-gautammenghani201@gmail.com
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> [tracing]
Cc: David Hildenbrand <david@redhat.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fortunately, the last user (KSM) is gone, so let's just remove this rather
special code from generic GUP handling -- especially because KSM never
required the PMD handling as KSM only deals with individual base pages.
[akpm@linux-foundation.org: fix merge snafu]Link: https://lkml.kernel.org/r/20221021101141.84170-10-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
FOLL_MIGRATION exists only for the purpose of break_ksm(), and actually,
there is not even the need to wait for the migration to finish, we only
want to know if we're dealing with a KSM page.
Using follow_page() just to identify a KSM page overcomplicates GUP code.
Let's use walk_page_range_vma() instead, because we don't actually care
about the page itself, we only need to know a single property -- no need
to even grab a reference.
So, get rid of follow_page() usage such that we can get rid of
FOLL_MIGRATION now and eventually be able to get rid of follow_page() in
the future.
In my setup (AMD Ryzen 9 3900X), running the KSM selftest to test unmerge
performance on 2 GiB (taskset 0x8 ./ksm_tests -D -s 2048), this results in
a performance degradation of ~2% (old: ~5010 MiB/s, new: ~4900 MiB/s). I
don't think we particularly care for now.
Interestingly, the benchmark reduction is due to the single callback.
Adding a second callback (e.g., pud_entry()) reduces the benchmark by
another 100-200 MiB/s.
Link: https://lkml.kernel.org/r/20221021101141.84170-9-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's add walk_page_range_vma(), which is similar to walk_page_vma(),
however, is only interested in a subset of the VMA range.
To be used in KSM code to stop using follow_page() next.
Link: https://lkml.kernel.org/r/20221021101141.84170-8-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's stop breaking COW via a fake write fault and let's use
FAULT_FLAG_UNSHARE instead. This avoids any wrong side effects of the
fake write fault, such as mapping the PTE writable and marking the pte
dirty/softdirty.
Consequently, we will no longer trigger a fake write fault and break COW
without any such side-effects.
Also, this fixes KSM interaction with userfaultfd-wp: when we have a KSM
page that's write-protected by userfaultfd, break_ksm()->handle_mm_fault()
will fail with VM_FAULT_SIGBUS and will simply return in break_ksm() with
0 instead of actually breaking COW.
For now, the KSM unmerge tests can trigger that:
$ sudo ./ksm_functional_tests
TAP version 13
1..3
# [RUN] test_unmerge
ok 1 Pages were unmerged
# [RUN] test_unmerge_discarded
ok 2 Pages were unmerged
# [RUN] test_unmerge_uffd_wp
not ok 3 Pages were unmerged
Bail out! 1 out of 3 tests failed
# Planned tests != run tests (2 != 3)
# Totals: pass:2 fail:1 xfail:0 xpass:0 skip:0 error:0
The warning in dmesg also indicates this wrong handling:
[ 230.096368] FAULT_FLAG_ALLOW_RETRY missing 881
[ 230.100822] CPU: 1 PID: 1643 Comm: ksm-uffd-wp [...]
[ 230.110124] Hardware name: [...]
[ 230.117775] Call Trace:
[ 230.120227] <TASK>
[ 230.122334] dump_stack_lvl+0x44/0x5c
[ 230.126010] handle_userfault.cold+0x14/0x19
[ 230.130281] ? tlb_finish_mmu+0x65/0x170
[ 230.134207] ? uffd_wp_range+0x65/0xa0
[ 230.137959] ? _raw_spin_unlock+0x15/0x30
[ 230.141972] ? do_wp_page+0x50/0x590
[ 230.145551] __handle_mm_fault+0x9f5/0xf50
[ 230.149652] ? mmput+0x1f/0x40
[ 230.152712] handle_mm_fault+0xb9/0x2a0
[ 230.156550] break_ksm+0x141/0x180
[ 230.159964] unmerge_ksm_pages+0x60/0x90
[ 230.163890] ksm_madvise+0x3c/0xb0
[ 230.167295] do_madvise.part.0+0x10c/0xeb0
[ 230.171396] ? do_syscall_64+0x67/0x80
[ 230.175157] __x64_sys_madvise+0x5a/0x70
[ 230.179082] do_syscall_64+0x58/0x80
[ 230.182661] ? do_syscall_64+0x67/0x80
[ 230.186413] entry_SYSCALL_64_after_hwframe+0x63/0xcd
This is primarily a fix for KSM+userfaultfd-wp, however, the fake write
fault was always questionable. As this fix is not easy to backport and
it's not very critical, let's not cc stable.
Link: https://lkml.kernel.org/r/20221021101141.84170-6-david@redhat.com
Fixes: 529b930b87d9 ("userfaultfd: wp: hook userfault handler to write protection fault")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All users -- GUP and KSM -- are gone, let's just remove it.
Link: https://lkml.kernel.org/r/20221021101141.84170-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that GUP no longer requires VM_FAULT_WRITE, break_ksm() is the sole
remaining user of VM_FAULT_WRITE. As we also want to stop triggering a
fake write fault and instead use FAULT_FLAG_UNSHARE -- similar to
GUP-triggered unsharing when taking a R/O pin on a shared anonymous page
(including KSM pages), let's stop relying on VM_FAULT_WRITE.
Let's rework break_ksm() to not rely on the return value of
handle_mm_fault() anymore to figure out whether COW-breaking was
successful. Simply perform another follow_page() lookup to verify the
result.
While this makes break_ksm() slightly less efficient, we can simplify
handle_mm_fault() a little and easily switch to FAULT_FLAG_UNSHARE without
introducing similar KSM-specific behavior for FAULT_FLAG_UNSHARE.
In my setup (AMD Ryzen 9 3900X), running the KSM selftest to test unmerge
performance on 2 GiB (taskset 0x8 ./ksm_tests -D -s 2048), this results in
a performance degradation of ~4% -- 5% (old: ~5250 MiB/s, new: ~5010
MiB/s).
I don't think that we particularly care about that performance drop when
unmerging. If it ever turns out to be an actual performance issue, we can
think about a better alternative for FAULT_FLAG_UNSHARE -- let's just keep
it simple for now.
Link: https://lkml.kernel.org/r/20221021101141.84170-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's add a test to measure performance of KSM breaking not triggered via
COW, but triggered by disabling KSM on an area filled with KSM pages via
MADV_UNMERGEABLE.
Link: https://lkml.kernel.org/r/20221021101141.84170-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As Peter points out, the caller passes a single VMA and can just do that
check itself.
And in fact, no existing users rely on test_walk() getting called. So
let's just remove it and make the implementation slightly more efficient.
Link: https://lkml.kernel.org/r/20221021101141.84170-7-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/ksm: break_ksm() cleanups and fixes", v2.
This series cleans up and fixes break_ksm(). In summary, we no longer use
fake write faults to break COW but instead FAULT_FLAG_UNSHARE. Further,
we move away from using follow_page() --- that we can hopefully remove
completely at one point --- and use new walk_page_range_vma() instead.
Fortunately, we can get rid of VM_FAULT_WRITE and FOLL_MIGRATION in common
code now.
Extend the existing ksm tests by an unmerge benchmark, and a some new
unmerge tests.
Also, add a selftest to measure MADV_UNMERGEABLE performance. In my setup
(AMD Ryzen 9 3900X), running the KSM selftest to test unmerge performance
on 2 GiB (taskset 0x8 ./ksm_tests -D -s 2048), this results in a
performance degradation of ~6% -- 7% (old: ~5250 MiB/s, new: ~4900 MiB/s).
I don't think we particularly care for now, but it's good to be aware of
the implication.
This patch (of 9):
Let's add three unmerge tests (MADV_UNMERGEABLE unmerging all pages in the
range).
test_unmerge(): basic unmerge tests
test_unmerge_discarded(): have some pte_none() entries in the range
test_unmerge_uffd_wp(): protect the merged pages using uffd-wp
ksm_tests.c currently contains a mixture of benchmarks and tests, whereby
each test is carried out by executing the ksm_tests binary with specific
parameters. Let's add new ksm_functional_tests.c that performs multiple,
smaller functional tests all at once.
Link: https://lkml.kernel.org/r/20221021101141.84170-1-david@redhat.com
Link: https://lkml.kernel.org/r/20221021101141.84170-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Our memory management kernel CI testing at Red Hat uses the VM
selftests and we have run into two problems:
First, our LTP tests overlap with the VM selftests.
We want to avoid unhelpful redundancy in our testing practices.
Second, we have observed the current run_vmtests.sh to report overall
failure/ambiguous results in the case that a machine lacks the necessary
hardware to perform one or more of the tests. E.g. ksm tests that
require more than one numa node.
We want to be able to run the vm selftests suitable to particular hardware.
Add the ability to run one or more groups of vm tests via run_vmtests.sh
instead of simply all-or-none in order to solve these problems.
Preserve existing default behavior of running all tests when the script
is invoked with no arguments.
Documentation of test groups is included in the patch as follows:
# ./run_vmtests.sh [ -h || --help ]
usage: ./tools/testing/selftests/vm/run_vmtests.sh [ -h | -t "<categories>"]
-t: specify specific categories to tests to run
-h: display this message
The default behavior is to run all tests.
Alternatively, specific groups tests can be run by passing a string
to the -t argument containing one or more of the following categories
separated by spaces:
- mmap
tests for mmap(2)
- gup_test
tests for gup using gup_test interface
- userfaultfd
tests for userfaultfd(2)
- compaction
a test for the patch "Allow compaction of unevictable pages"
- mlock
tests for mlock(2)
- mremap
tests for mremap(2)
- hugevm
tests for very large virtual address space
- vmalloc
vmalloc smoke tests
- hmm
hmm smoke tests
- madv_populate
test memadvise(2) MADV_POPULATE_{READ,WRITE} options
- memfd_secret
test memfd_secret(2)
- process_mrelease
test process_mrelease(2)
- ksm
ksm tests that do not require >=2 NUMA nodes
- ksm_numa
ksm tests that require >=2 NUMA nodes
- pkey
memory protection key tests
- soft_dirty
test soft dirty page bit semantics
- anon_cow
test anonymous copy-on-write semantics
example: ./run_vmtests.sh -t "hmm mmap ksm"
Link: https://lkml.kernel.org/r/20221018231222.1884715-1-jsavitz@redhat.com
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Cc: Joel Savitz <jsavitz@redhat.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The file/directory size is updated into inode by i_size_write()
before __exfat_truncate() is called, so it is redundant to
re-update by i_size_write() in __exfat_truncate().
Code refinement, no functional changes.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
argument 'size' is not used in exfat_truncate(), remove it.
Code refinement, no functional changes.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
This commit removes argument 'num_entries' and 'type' from
exfat_find_dir_entry().
Code refinement, no functional changes.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
The code gets the dentry, but the dentry is not used, remove the
code.
Code refinement, no functional changes.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
There is no need to call ilog2() for the conversions between
cluster and dentry in exfat_readdir(), because these conversions
can be replaced with EXFAT_DEN_TO_CLU()/EXFAT_CLU_TO_DEN().
Code refinement, no functional changes.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
Code refinement, no functional changes.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
Since struct exfat_entry_set_cache is allocated from stack,
no need to free, so rename exfat_free_dentry_set() to
exfat_put_dentry_set(). After renaming, the new function pair
is exfat_get_dentry_set()/exfat_put_dentry_set().
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
The size of struct exfat_entry_set_cache is only 56 bytes on
64-bit system, and allocating from stack is more efficient than
allocating from heap.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
In special cases, a file or a directory may occupied more than 19
directory entries, pre-allocating 3 bh is not enough. Such as
- Support vendor secondary directory entry in the future.
- Since file directory entry is damaged, the SecondaryCount
field is bigger than 18.
So this commit supports dynamic allocation of bh.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
In normal, there are 19 directory entries at most for a file or
a directory.
- A file directory entry
- A stream extension directory entry
- 1~17 file name directory entry
So the directory entries are in 3 sectors at most, it is enough
for struct exfat_entry_set_cache to pre-allocate 3 bh.
This commit changes the size of struct exfat_entry_set_cache as:
Before After
32-bit system 88 32 bytes
64-bit system 168 48 bytes
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
After traversing all directory entries, hint the empty directory
entry no matter whether or not there are enough empty directory
entries.
After this commit, hint the empty directory entries like this:
1. Hint the deleted directory entries if enough;
2. Hint the deleted and unused directory entries which at the
end of the cluster chain no matter whether enough or not(Add
by this commit);
3. If no any empty directory entries, hint the empty directory
entries in the new cluster(Add by this commit).
This avoids repeated traversal of directory entries, reduces CPU
usage, and improves the performance of creating files and
directories(especially on low-performance CPUs).
Test create 5000 files in a class 4 SD card on imx6q-sabrelite
with:
for ((i=0;i<5;i++)); do
sync
time (for ((j=1;j<=1000;j++)); do touch file$((i*1000+j)); done)
done
The more files, the more performance improvements.
Before After Improvement
1~1000 25.360s 22.168s 14.40%
1001~2000 38.242s 28.72ss 33.15%
2001~3000 49.134s 35.037s 40.23%
3001~4000 62.042s 41.624s 49.05%
4001~5000 73.629s 46.772s 57.42%
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
This commit adds exfat_set_empty_hint()/exfat_reset_empty_hint()
to reduce code complexity and make code more readable.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
Some 32-bit configurations don't pull in the spin_begin/end/relax
definitions. Fix is to restore a lost include.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 84990b169557 ("powerpc/qspinlock: add mcs queueing for contended waiters")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/oe-kbuild-all/202212050224.i7uh9fOh-lkp@intel.com
Link: https://lore.kernel.org/r/20221208123225.1566113-1-npiggin@gmail.com
|
|
'led' nodes should have a reference to LED common.yaml schema. Add it where
missing and drop any duplicate properties.
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221207204327.2810001-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The example has 'led-gpio' properties, but that's not documented. As the
'gpio' form is deprecated, add 'led-gpios' to the schema and update the
example.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221207204327.2810001-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
and find_dup_cset_prop()
When kmalloc() fail to allocate memory in kasprintf(), fn_1 or fn_2 will
be NULL, and strcmp() will cause null pointer dereference.
Fixes: 2fe0e8769df9 ("of: overlay: check prevents multiple fragments touching same property")
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20221211023337.592266-1-ruanjinjie@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
pcf85063_clkout_control reads the wrong register but then update the
correct one.
Reported-by: Janne Terho <janne.terho@ouman.fi>
Fixes: 8c229ab6048b ("rtc: pcf85063: Add pcf85063 clkout control to common clock framework")
Link: https://lore.kernel.org/r/20221211223553.59955-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
|
|
rx6110_spi_of_match is not used when !OF, leading to a warning:
>> drivers/rtc/rtc-rx6110.c:384:34: warning: 'rx6110_spi_of_match' defined but not used [-Wunused-const-variable=]
384 | static const struct of_device_id rx6110_spi_of_match[] = {
| ^~~~~~~~~~~~~~~~~~~
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20221211215756.54002-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Vitor left Synopsys and the email address is now bouncing.
Link: https://lore.kernel.org/r/20221211205539.19353-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Because not all I3C drivers have the hot-join feature ready, and
especially not all I3C devices support hot-join feature, exporting
SETDASA method could be useful. With this function, the I3C controller
could perform a DAA to I3C devices when users decide to turn these I3C
devices off and on again during run-time.
Tested: This change has been tested with turnning off an I3C device and
turning on it again during run-time. The device driver calls SETDASA
method to perform DAA to the device. And communication between I3C
controller and device is set up again correctly.
Signed-off-by: Jack Chen <zenghuchen@google.com>
Link: https://lore.kernel.org/r/20221207205059.3848851-1-zenghuchen@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Present definition for module_i3c_i2c_driver uses only the
1st argument i.e., struct i3c_driver.
Irrespective of CONFIG_I3C being enabled/disabled,
struct i2c_driver is never passed to module_driver()
Passing struct i2c_driver as the 4th argument works.
Signed-off-by: Akshay Gupta <Akshay.Gupta@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Link: https://lore.kernel.org/r/20221205105413.937704-1-naveenkrishna.chatradhi@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Reduce usage of 'struct rk808' (driver data of the parent MFD), so
that only the chip variant field is still being accessed directly.
This allows restructuring the MFD driver to support SPI based
PMICs.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20221020204251.108565-4-sebastian.reichel@collabora.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fix from Joerg Roedel:
- Fix device mask to catch all affected devices in the recently added
quirk for QAT devices in the Intel VT-d driver.
* tag 'iommu-fix-v6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix buggy QAT device mask
|
|
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed.
msc313_rtc_probe() was passing clk_disable_unprepare() directly, which
did not have matching prototypes for devm_add_action_or_reset()'s
callback argument. Refactor to use devm_clk_get_enabled() instead.
This was found as a result of Clang's new -Wcast-function-type-strict
flag, which is more sensitive than the simpler -Wcast-function-type,
which only checks for type width mismatches.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202211041527.HD8TLSE1-lkp@intel.com
Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Daniel Palmer <daniel@thingy.jp>
Cc: Romain Perier <romain.perier@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rtc@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Daniel Palmer <daniel@thingy.jp>
Tested-by: Daniel Palmer <daniel@thingy.jp>
Link: https://lore.kernel.org/r/20221202184525.gonna.423-kees@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
