| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:
- rumble support for Xbox One S, from Andrey Smirnov
- high-resolution support for Logitech mice, from Harry Cutts
- support for recent devices requiring the HID parse to be able to cope
with tag report sizes > 256
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (35 commits)
HID: usbhid: Add quirk for Redragon/Dragonrise Seymur 2
HID: wacom: Work around HID descriptor bug in DTK-2451 and DTH-2452
HID: google: add dependency on Cros EC for Hammer
HID: elan: fix spelling mistake "registred" -> "registered"
HID: google: drop superfluous const before SIMPLE_DEV_PM_OPS()
HID: google: add support tablet mode switch for Whiskers
mfd: cros: add "base attached" MKBP switch definition
Input: reserve 2 events code because of HID
HID: magicmouse: add support for Apple Magic Trackpad 2
HID: i2c-hid: override HID descriptors for certain devices
HID: hid-bigbenff: driver for BigBen Interactive PS3OFMINIPAD gamepad
HID: logitech: fix a used uninitialized GCC warning
HID: intel-ish-hid: using list_head for ipc write queue
HID: intel-ish-hid: use resource-managed api
HID: intel_ish-hid: Enhance API to get ring buffer sizes
HID: intel-ish-hid: use helper function to search client id
HID: intel-ish-hid: ishtp: add helper function for client search
HID: intel-ish-hid: use helper function to access client buffer
HID: intel-ish-hid: ishtp: add helper functions for client buffer operation
HID: intel-ish-hid: use helper function for private driver data set/get
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Old Drivers
- Remove driver for S6E63M0
- Remove driver for LD9040
Fix-ups
- Trivial (email address update); adp*_bl
- Use 'atomic' PWM API; pwm_bl
Bug Fixes
- Remove pointless boolen '&ptr' check; lm3639_bl"
* tag 'backlight-next-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: Remove ld9040 driver
backlight: Remove s6e63m0 driver
backlight: lm3639: Unconditionally call led_classdev_unregister
backlight: pwm_bl: Switch to using "atomic" PWM API
backlight: Update MODULE AUTHOR email address
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers
- Add support for USART SPI to AT91*
New Functionality
- Add support for Audio CODECs to motorola-cpcap
Fix-ups
- DT documentation fix-ups; atmel-usart
- Staticise functions/structs; spi-at91-usart, arizona-core
- Constify; ti-lmu
- Fix memory leaks; menelaus
- Change device 'wake-up' status; ti_am335x_tscadc, max8997
- Power Management (suspend/resume) semantic changes; ti_am335x_adc, cros_ec, max8997
- SPDX churn; sec-core (+ headers), max* (+ headers), intel* (+ headers),
- Trivial (whitespace, email addresses, alphabetisise); Kconfig, adp5520, intel_soc_pmic_*
- Build as module; sec-irq
- Use new %pOFn printk format for device_node.name; max77620
- Remove unused code; madera
- Use generic MACROs; intel_msic, intel_soc_pmic_crc
- Move to GPIOD; ti-lmu
- Use managed resources; ti-lmu
Bug Fixes
- Add missing headers; at91-usart
- Prevent device from entering low-power mode; arizona-core
- Poll for BOOT_DONE to avoid still-booting NACK; madera-core
- Prevent ADC read from shutting down device; mc13xxx-core"
* tag 'mfd-next-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits)
mfd: cros_ec: Avoid unneeded internal declaration warning
mfd: ti-lmu: Use of_device_get_match_data() helper
mfd: ti-lmu: Use managed resource for everything
mfd: ti-lmu: Switch to GPIOD
mfd: ti-lmu: constify mfd_cell tables
mfd: max8997: Disable interrupt handling for suspend/resume cycle
mfd: max8997: Enale irq-wakeup unconditionally
mfd: arizona: Make array mclk_name static, shrinks object size
MAINTAINERS: Add myself as designated reviewer of Intel MFD PMIC
mfd: Convert Intel PMIC drivers to use SPDX identifier 1;5201;0c Reduce size of duplicated comments by switching to use SPDX identifier.
mfd: Sort headers alphabetically for Intel PMIC drivers
mfd: intel_soc_pmic_bxtwc: Chain power button IRQs as well
mfd: intel_soc_pmic_crc: Use REGMAP_IRQ_REG() macro
mfd: intel_soc_pmic_crc: Use DEFINE_RES_IRQ_NAMED() macro
mfd: intel_msic: Use DEFINE_RES_IRQ() macro
mfd: motorola-cpcap: Add audio-codec support
mfd: mc13xxx-core: Fix PMIC shutdown when reading ADC values
mfd: madera: Remove unused forward reference
mfd: max77620: Convert to using %pOFn instead of device_node.name
mfd: madera: Don't use regmap_read_poll_timeout to poll for BOOT_DONE
...
|
|
When registering one RTC device, it will check to see if there is an
alarm already set in RTC hardware by reading RTC alarm, at this time
we should always read the normal alarm put in always-on region by
checking the rtc->registered flag.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The RTC interrupt enable register is not put in always-power-on region
supplied by VDDRTC, so we should check if we need enable the alarm
interrupt when system booting.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
When registering one rtc device, it will check to see if there is an
alarm already set in rtc hardware by issuing __rtc_read_alarm(). So
we should not disable the RTC interrupts and clear the interrupts
status in probe() function.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
We should clear the SPG value update interrupt status once the SPG value
is updated successfully, in case incorrect status validation for next time.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Set wakeup capability before registering rtc device, in case the alarmtimer
can find one available rtc device.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Fixes 2018-10-24
This series contains fixes for the ice driver.
Anirudh fixes a namespace issue which was introduced with a previous
patch to remove ice_netpoll. Fixed up the device ID define names to
align with the branding string names. Use the capability count returned
by the firmware, instead of calculating the count. Introduced driver
workarounds due to current firmware limitations. Fixed the queue
mapping for a VF, which needs to be set in the config and scatter queue
modes. Fixed the driver which is setup to handle link status events
(LSE), even though the firmware does not have this feature yet, so add
the ability to poll for link status changes while we wait for updated
firmware.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
route
The intent of ip6_route_check_nh_onlink is to make sure the gateway
given for an onlink route is not actually on a connected route for
a different interface (e.g., 2001:db8:1::/64 is on dev eth1 and then
an onlink route has a via 2001:db8:1::1 dev eth2). If the gateway
lookup hits the default route then it most likely will be a different
interface than the onlink route which is ok.
Update ip6_route_check_nh_onlink to disregard the device mismatch
if the gateway lookup hits the default route. Turns out the existing
onlink tests are passing because there is no default route or it is
an unreachable default, so update the onlink tests to have a default
route other than unreachable.
Fixes: fc1e64e1092f6 ("net/ipv6: Add support for onlink flag")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Marco reported an error with hfsc:
root@Calimero:~# tc qdisc add dev eth0 root handle 1:0 hfsc default 1
Error: Attribute failed policy validation.
Apparently a few implementations pass TCA_OPTIONS as a binary instead
of nested attribute, so drop TCA_OPTIONS from the policy.
Fixes: 8b4c3cdd9dd8 ("net: sched: Add policy validation for tc attributes")
Reported-by: Marco Berizzi <pupilla@libero.it>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the physical link goes up or down, the driver is supposed to
receive a link status event (LSE). The driver currently has the code
to handle LSEs but there is no firmware support for this feature yet.
So this patch adds the ability for the driver to poll for link status
changes. The polling itself is done in ice_watchdog_subtask.
For namespace cleanliness, this patch also removes code that handles
LSE. This code will be reintroduced once the feature is officially
supported.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Allocate VF interrupts using VPINT_ALLOC_PCI. Multiple interrupts are
specified as a range from "first" to "last".
Also, according to the spec, the queue mapping for a VF needs to be set
in both contig and scatter queue modes. So make this change as well.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
ice_dev_onetime_setup contains a couple of driver workarounds for current
firmware limitations. These workarounds are expected to go away once
these limitations are fixed in the firmware.
On a firmware release that has these issues addressed, these workarounds
(while unnecessary) will not break anything.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This patch fixes the smatch warning,
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c:700
hclge_log_and_clear_ppp_error() error: uninitialized symbol
'hw_err_lst3'
Link: https://lkml.org/lkml/2018/10/23/430
Fixes: da2d072a9ea7 ("net: hns3: Add enable and process hw errors from PPP")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a copy and paste bug where we copied the sizeof() from the chunk
before. We're copying more data than intended but the destination is a
union so it doesn't cause memory corruption.
Fixes: ffb0abd7e9cb ("octeontx2-af: NIX AQ instruction enqueue support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current handling of CHECKSUM_COMPLETE packets by the UDP stack is
incorrect for any packet that has an incorrect checksum value.
udp4/6_csum_init() will both make a call to
__skb_checksum_validate_complete() to initialize/validate the csum
field when receiving a CHECKSUM_COMPLETE packet. When this packet
fails validation, skb->csum will be overwritten with the pseudoheader
checksum so the packet can be fully validated by software, but the
skb->ip_summed value will be left as CHECKSUM_COMPLETE so that way
the stack can later warn the user about their hardware spewing bad
checksums. Unfortunately, leaving the SKB in this state can cause
problems later on in the checksum calculation.
Since the the packet is still marked as CHECKSUM_COMPLETE,
udp_csum_pull_header() will SUBTRACT the checksum of the UDP header
from skb->csum instead of adding it, leaving us with a garbage value
in that field. Once we try to copy the packet to userspace in the
udp4/6_recvmsg(), we'll make a call to skb_copy_and_csum_datagram_msg()
to checksum the packet data and add it in the garbage skb->csum value
to perform our final validation check.
Since the value we're validating is not the proper checksum, it's possible
that the folded value could come out to 0, causing us not to drop the
packet. Instead, we believe that the packet was checksummed incorrectly
by hardware since skb->ip_summed is still CHECKSUM_COMPLETE, and we attempt
to warn the user with netdev_rx_csum_fault(skb->dev);
Unfortunately, since this is the UDP path, skb->dev has been overwritten
by skb->dev_scratch and is no longer a valid pointer, so we end up
reading invalid memory.
This patch addresses this problem in two ways:
1) Do not use the dev pointer when calling netdev_rx_csum_fault()
from skb_copy_and_csum_datagram_msg(). Since this gets called
from the UDP path where skb->dev has been overwritten, we have
no way of knowing if the pointer is still valid. Also for the
sake of consistency with the other uses of
netdev_rx_csum_fault(), don't attempt to call it if the
packet was checksummed by software.
2) Add better CHECKSUM_COMPLETE handling to udp4/6_csum_init().
If we receive a packet that's CHECKSUM_COMPLETE that fails
verification (i.e. skb->csum_valid == 0), check who performed
the calculation. It's possible that the checksum was done in
software by the network stack earlier (such as Netfilter's
CONNTRACK module), and if that says the checksum is bad,
we can drop the packet immediately instead of waiting until
we try and copy it to userspace. Otherwise, we need to
mark the SKB as CHECKSUM_NONE, since the skb->csum field
no longer contains the full packet checksum after the
call to __skb_checksum_validate_complete().
Fixes: e6afc8ace6dd ("udp: remove headers from UDP packets before queueing")
Fixes: c84d949057ca ("udp: copy skb->truesize in the first cache line")
Cc: Sam Kumar <samanthakumar@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
David Ahern says:
====================
net: Fixups for recent dump filtering changes
Li RongQing noted that tgt_net is leaked in ipv4 due to the recent change
to handle address dumps for a specific device. The report also applies to
ipv6 and other error paths. Patches 1 and 2 fix those leaks.
Patch 3 stops route dumps from erroring out when dumping across address
families and a table id is given. This is needed in preparation for
patch 4.
Patch 4 updates the rtnl_dump_all to handle a failure in one of the dumpit
functions. At the moment, if an address dump returns an error the dump all
loop breaks but the error is dropped. The result can be no data is returned
and no error either leaving the user wondering about the addresses.
Patches were tested with a modified iproute2 to add invalid data to the
dump request causing each specific failure path to be hit in addition
to positive testing that it works as it should when given valid data.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If an address, route or netconf dump request is sent for AF_UNSPEC, then
rtnl_dump_all is used to do the dump across all address families. If one
of the dumpit functions fails (e.g., invalid attributes in the dump
request) then rtnl_dump_all needs to propagate that error so the user
gets an appropriate response instead of just getting no data.
Fixes: effe67926624 ("net: Enable kernel side filtering of route dumps")
Fixes: 5fcd266a9f64 ("net/ipv4: Add support for dumping addresses for a specific device")
Fixes: 6371a71f3a3b ("net/ipv6: Add support for dumping addresses for a specific device")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When doing a route dump across all address families, do not error out
if the table does not exist. This allows a route dump for AF_UNSPEC
with a table id that may only exist for some of the families.
Do return the table does not exist error if dumping routes for a
specific family and the table does not exist.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If tgt_net is set based on IFA_TARGET_NETNSID attribute in the dump
request, make sure all error paths call put_net.
Fixes: 6371a71f3a3b ("net/ipv6: Add support for dumping addresses for a specific device")
Fixes: ed6eff11790a ("net/ipv6: Update inet6_dump_addr for strict data checking")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If tgt_net is set based on IFA_TARGET_NETNSID attribute in the dump
request, make sure all error paths call put_net.
Fixes: 5fcd266a9f64 ("net/ipv4: Add support for dumping addresses for a specific device")
Fixes: c33078e3dfb1 ("net/ipv4: Update inet_dump_ifaddr for strict data checking")
Reported-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The firmware now returns the capability count in the command buffer.
Use it.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Update to the current firmware major and minor version which are
1 and 3 respectively.
Also remove an empty comment line.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Basically remove references to C810 and use E810C (from the branding
string) instead.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Strip escape sequences from the stream to the ftracetest
summary log file. Note that all test-case results are
dumped raw in each file.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
If test is being directly executed (with stdout opened on the
terminal) and the terminal capabilities indicate enough
colors, then use the existing scheme of green, red, and blue
to show when tests pass, fail or end in a different way.
When running the tests redirecting the stdout, for instance,
to a file, then colors are not shown, thus producing a more
readable output.
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Makefile contains -D_GNU_SOURCE. remove define "_GNU_SOURCE"
in c files.
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Fixes the following warnings:
dirty_log_test.c: In function ‘help’:
dirty_log_test.c:216:9: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘int’ [-Wformat=]
printf(" -i: specify iteration counts (default: %"PRIu64")\n",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from include/test_util.h:18:0,
from dirty_log_test.c:16:
/usr/include/inttypes.h:105:34: note: format string is defined here
# define PRIu64 __PRI64_PREFIX "u"
dirty_log_test.c:218:9: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘int’ [-Wformat=]
printf(" -I: specify interval in ms (default: %"PRIu64" ms)\n",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from include/test_util.h:18:0,
from dirty_log_test.c:16:
/usr/include/inttypes.h:105:34: note: format string is defined here
# define PRIu64 __PRI64_PREFIX "u"
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Now that ftracetest has over 80 tests, it is difficult to simply scroll
up the console window to find the failed tests when it reports just two
tests have failed. In order to make this stand out better, have the
color of the word "PASS" be green, "FAIL" and "XFAIL" be red, and all
other results be blue. This helps tremendously in quickly spotting the
failed tests by just scrolling up the console window.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Trivial fix to spelling mistake in TEST_ASSERT message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
When simply running `make' from the selftests top dir, this
error shows up:
cc -O2 -g -std=gnu99 -Wall -I../../../../usr/include/ -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/uuid gpio-mockup-chardev.c ../../../gpio/gpio-utils.o -lmount -o gpio-mockup-chardev
cc: error: ../../../gpio/gpio-utils.o: No such file or directory
<builtin>: recipe for target 'gpio-mockup-chardev' failed
make[1]: *** [gpio-mockup-chardev] Error 1
because the output directory is set to "selftests/gpio" and
all binaries built from ../../../gpio/ end up there. In fact,
they appear as, exempli gratia:
* gpiogpio-event-mon
* gpiogpio-hammer
* gpioinclude/
* gpiolsgpio
which is wrong, as it's missing a directory separator
somewhere.
This patch sets straight the output directory when building
../../../gpio/ so that binaries don't cross paths.
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
This patch cleans up the Makefile by restructuring a couple of
things, namely:
1) change explicit paths in targets for variables
2) substitute a variable (BINARIES) for another, part of the
selftests build system (TEST_PROGS_EXTENDED)
3) proper cleaning up of the EXTRA objects
The resulting Makefile is much more readable and manageable.
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
When ioctls for WDIOC_SETOPTIONS (WDIOS_DISABLECARD or WDIOS_ENABLECARD),
WDIOC_SETTIMEOUT, and WDIOC_SETPRETIMEOUT fail, the error path continues
to handler watchdog timer until user terminates it. When ioctl returns
error, it might not be safe to let the watchdog tick. The error could be
due an unsupported ioctl command or some other error.
Fix it to handle error paths as oneshot to stop the watchdog ticks and
exit right away.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Add command line arguments to call ioctl WDIOC_GETTIMEOUT,
WDIOC_GETPRETIMEOUT and WDIOC_SETPRETIMEOUT.
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Printf's say errno but print the string version of error.
Make consistent.
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
When /dev/watchdog open fails, watchdog exits with "watchdog not enabled"
message. This is incorrect when open fails due to insufficient privilege.
Fix message to clearly state the reason when open fails with EACCESS when
a non-root user runs it.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Add a testcase for tracing_cpumask with function tracer.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Add a testcase for wakeup_rt tracer. This requires chrt
command to test.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Add a testcase for wakeup tracer.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Add a test case for stacktrace filter command for ftrace.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Add a simple testcase for trace_pipe which can consume
ringbuffer.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Add a testcase for function filter on module.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Add a testcase for max stack tracer, which checks basic
max stack usage tracing and its filter feature.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Add a testcase for function profiling per-cpu statistics
interface. There is already func_profile.tc, but that is
mainly focusing on the combination of function-profiler
and function tracer. This testcase ensures trace_stat
per-cpu function statistics is correctly updated.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Add a testcase for changing ringbuffer size. This tests
not only ringbuffer size but also tests the imbalance
per-cpu buffer size change too.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Add trace_printk sample module test. This requires to
enable trace_printk.ko module for test.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Add a testcase for kprobe-event with @symbol argument.
Since @symbol needs to refer the kernel data symbol
(linux_proc_banner), it requires CONFIG_KALLSYMS_ALL.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Add a testcase for testing kprobe_profile interface
which provides per-kprobe event hit/misshit counts.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Add kprobe-event with $comm argument testcase to
ftracetest. This not only checks syntax but
also checks log file.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
