Age | Commit message (Collapse) | Author |
|
Ido Schimmel says:
====================
vxlan: Age FDB entries based on Rx traffic
tl;dr - This patchset prevents VXLAN FDB entries from lingering if
traffic is only forwarded to a silent host.
The VXLAN driver maintains two timestamps for each FDB entry: 'used' and
'updated'. The first is refreshed by both the Rx and Tx paths and the
second is refreshed upon migration.
The driver ages out entries according to their 'used' time which means
that an entry can linger when traffic is only forwarded to a silent host
that might have migrated to a different remote.
This patchset solves the problem by adjusting the above semantics and
aligning them to those of the bridge driver. That is, 'used' time is
refreshed by the Tx path, 'updated' time is refresh by Rx path or user
space updates and entries are aged out according to their 'updated'
time.
Patches #1-#2 perform small changes in how the 'used' and 'updated'
fields are accessed.
Patches #3-#5 refresh the 'updated' time where needed.
Patch #6 flips the driver to age out FDB entries according to their
'updated' time.
Patch #7 removes unnecessary updates to the 'used' time.
Patch #8 extends a test case to cover aging of FDB entries in the
presence of Tx traffic.
====================
Link: https://patch.msgid.link/20250204145549.1216254-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend the VXLAN FDB aging test case to verify that FDB entries are aged
out when they only forward traffic and not refreshed by received
traffic.
The test fails before "vxlan: Age out FDB entries based on 'updated'
time":
# ./vxlan_bridge_1d.sh
[...]
TEST: VXLAN: Ageing of learned FDB entry [FAIL]
[...]
# echo $?
1
And passes after it:
# ./vxlan_bridge_1d.sh
[...]
TEST: VXLAN: Ageing of learned FDB entry [ OK ]
[...]
# echo $?
0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250204145549.1216254-9-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the VXLAN driver ages out FDB entries based on their 'updated'
time we can remove unnecessary updates of the 'used' time from the Rx
path and the control path, so that the 'used' time is only updated by
the Tx path.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250204145549.1216254-8-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the VXLAN driver ages out FDB entries based on their 'used'
time which is refreshed by both the Tx and Rx paths. This means that an
FDB entry will not age out if traffic is only forwarded to the target
host:
# ip link add name vx1 up type vxlan id 10010 local 192.0.2.1 dstport 4789 learning ageing 10
# bridge fdb add 00:11:22:33:44:55 dev vx1 self dynamic dst 198.51.100.1
# bridge fdb get 00:11:22:33:44:55 br vx1 self
00:11:22:33:44:55 dev vx1 dst 198.51.100.1 self
# mausezahn vx1 -a own -b 00:11:22:33:44:55 -c 0 -p 100 -q &
# sleep 20
# bridge fdb get 00:11:22:33:44:55 br vx1 self
00:11:22:33:44:55 dev vx1 dst 198.51.100.1 self
This is wrong as an FDB entry will remain present when we no longer have
an indication that the host is still behind the current remote. It is
also inconsistent with the bridge driver:
# ip link add name br1 up type bridge ageing_time $((10 * 100))
# ip link add name swp1 up master br1 type dummy
# bridge fdb add 00:11:22:33:44:55 dev swp1 master dynamic
# bridge fdb get 00:11:22:33:44:55 br br1
00:11:22:33:44:55 dev swp1 master br1
# mausezahn br1 -a own -b 00:11:22:33:44:55 -c 0 -p 100 -q &
# sleep 20
# bridge fdb get 00:11:22:33:44:55 br br1
Error: Fdb entry not found.
Solve this by aging out entries based on their 'updated' time, which is
not refreshed by the Tx path:
# ip link add name vx1 up type vxlan id 10010 local 192.0.2.1 dstport 4789 learning ageing 10
# bridge fdb add 00:11:22:33:44:55 dev vx1 self dynamic dst 198.51.100.1
# bridge fdb get 00:11:22:33:44:55 br vx1 self
00:11:22:33:44:55 dev vx1 dst 198.51.100.1 self
# mausezahn vx1 -a own -b 00:11:22:33:44:55 -c 0 -p 100 -q &
# sleep 20
# bridge fdb get 00:11:22:33:44:55 br vx1 self
Error: Fdb entry not found.
But is refreshed by the Rx path:
# ip address add 192.0.2.1/32 dev lo
# ip link add name vx1 up type vxlan id 10010 local 192.0.2.1 dstport 4789 localbypass
# ip link add name vx2 up type vxlan id 20010 local 192.0.2.1 dstport 4789 learning ageing 10
# bridge fdb add 00:11:22:33:44:55 dev vx1 self static dst 127.0.0.1 vni 20010
# mausezahn vx1 -a 00:aa:bb:cc:dd:ee -b 00:11:22:33:44:55 -c 0 -p 100 -q &
# sleep 20
# bridge fdb get 00:aa:bb:cc:dd:ee br vx2 self
00:aa:bb:cc:dd:ee dev vx2 dst 127.0.0.1 self
# pkill mausezahn
# sleep 20
# bridge fdb get 00:aa:bb:cc:dd:ee br vx2 self
Error: Fdb entry not found.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250204145549.1216254-7-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a host migrates to a different remote and a packet is received from
the new remote, the corresponding FDB entry is updated and its 'updated'
time is refreshed.
However, when user space replaces the remote of an FDB entry, its
'updated' time is not refreshed:
# ip link add name vx1 up type vxlan id 10010 dstport 4789
# bridge fdb add 00:11:22:33:44:55 dev vx1 self dynamic dst 198.51.100.1
# sleep 10
# bridge -s -j -p fdb get 00:11:22:33:44:55 br vx1 self | jq '.[]["updated"]'
10
# bridge fdb replace 00:11:22:33:44:55 dev vx1 self dynamic dst 198.51.100.2
# bridge -s -j -p fdb get 00:11:22:33:44:55 br vx1 self | jq '.[]["updated"]'
10
This can lead to the entry being aged out prematurely and it is also
inconsistent with the bridge driver:
# ip link add name br1 up type bridge
# ip link add name swp1 master br1 up type dummy
# ip link add name swp2 master br1 up type dummy
# bridge fdb add 00:11:22:33:44:55 dev swp1 master dynamic vlan 1
# sleep 10
# bridge -s -j fdb get 00:11:22:33:44:55 br br1 vlan 1 | jq '.[]["updated"]'
10
# bridge fdb replace 00:11:22:33:44:55 dev swp2 master dynamic vlan 1
# bridge -s -j fdb get 00:11:22:33:44:55 br br1 vlan 1 | jq '.[]["updated"]'
0
Adjust the VXLAN driver to refresh the 'updated' time of an FDB entry
whenever one of its attributes is changed by user space:
# ip link add name vx1 up type vxlan id 10010 dstport 4789
# bridge fdb add 00:11:22:33:44:55 dev vx1 self dynamic dst 198.51.100.1
# sleep 10
# bridge -s -j -p fdb get 00:11:22:33:44:55 br vx1 self | jq '.[]["updated"]'
10
# bridge fdb replace 00:11:22:33:44:55 dev vx1 self dynamic dst 198.51.100.2
# bridge -s -j -p fdb get 00:11:22:33:44:55 br vx1 self | jq '.[]["updated"]'
0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250204145549.1216254-6-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 'NTF_USE' flag can be used by user space to refresh FDB entries so
that they will not age out. Currently, the VXLAN driver implements it by
refreshing the 'used' field in the FDB entry as this is the field
according to which FDB entries are aged out.
Subsequent patches will switch the VXLAN driver to age out entries based
on the 'updated' field. Prepare for this change by refreshing the
'updated' field upon 'NTF_USE'. This is consistent with the bridge
driver's FDB:
# ip link add name br1 up type bridge
# ip link add name swp1 master br1 up type dummy
# bridge fdb add 00:11:22:33:44:55 dev swp1 master dynamic vlan 1
# sleep 10
# bridge fdb replace 00:11:22:33:44:55 dev swp1 master dynamic vlan 1
# bridge -s -j fdb get 00:11:22:33:44:55 br br1 vlan 1 | jq '.[]["updated"]'
10
# sleep 10
# bridge fdb replace 00:11:22:33:44:55 dev swp1 master use dynamic vlan 1
# bridge -s -j fdb get 00:11:22:33:44:55 br br1 vlan 1 | jq '.[]["updated"]'
0
Before:
# ip link add name vx1 up type vxlan id 10010 dstport 4789
# bridge fdb add 00:11:22:33:44:55 dev vx1 self dynamic dst 198.51.100.1
# sleep 10
# bridge fdb replace 00:11:22:33:44:55 dev vx1 self dynamic dst 198.51.100.1
# bridge -s -j -p fdb get 00:11:22:33:44:55 br vx1 self | jq '.[]["updated"]'
10
# sleep 10
# bridge fdb replace 00:11:22:33:44:55 dev vx1 self use dynamic dst 198.51.100.1
# bridge -s -j -p fdb get 00:11:22:33:44:55 br vx1 self | jq '.[]["updated"]'
20
After:
# ip link add name vx1 up type vxlan id 10010 dstport 4789
# bridge fdb add 00:11:22:33:44:55 dev vx1 self dynamic dst 198.51.100.1
# sleep 10
# bridge fdb replace 00:11:22:33:44:55 dev vx1 self dynamic dst 198.51.100.1
# bridge -s -j -p fdb get 00:11:22:33:44:55 br vx1 self | jq '.[]["updated"]'
10
# sleep 10
# bridge fdb replace 00:11:22:33:44:55 dev vx1 self use dynamic dst 198.51.100.1
# bridge -s -j -p fdb get 00:11:22:33:44:55 br vx1 self | jq '.[]["updated"]'
0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250204145549.1216254-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, when learning is enabled and a packet is received from the
expected remote, the 'updated' field of the FDB entry is not refreshed.
This will become a problem when we switch the VXLAN driver to age out
entries based on the 'updated' field.
Solve this by always refreshing an FDB entry when we receive a packet
with a matching source MAC address, regardless if it was received via
the expected remote or not as it indicates the host is alive. This is
consistent with the bridge driver's FDB.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250204145549.1216254-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Avoid two volatile reads in the data path. Instead, read jiffies once
and only if an FDB entry was found.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250204145549.1216254-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 'used' and 'updated' fields in the FDB entry structure can be
accessed concurrently by multiple threads, leading to reports such as
[1]. Can be reproduced using [2].
Suppress these reports by annotating these accesses using
READ_ONCE() / WRITE_ONCE().
[1]
BUG: KCSAN: data-race in vxlan_xmit / vxlan_xmit
write to 0xffff942604d263a8 of 8 bytes by task 286 on cpu 0:
vxlan_xmit+0xb29/0x2380
dev_hard_start_xmit+0x84/0x2f0
__dev_queue_xmit+0x45a/0x1650
packet_xmit+0x100/0x150
packet_sendmsg+0x2114/0x2ac0
__sys_sendto+0x318/0x330
__x64_sys_sendto+0x76/0x90
x64_sys_call+0x14e8/0x1c00
do_syscall_64+0x9e/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
read to 0xffff942604d263a8 of 8 bytes by task 287 on cpu 2:
vxlan_xmit+0xadf/0x2380
dev_hard_start_xmit+0x84/0x2f0
__dev_queue_xmit+0x45a/0x1650
packet_xmit+0x100/0x150
packet_sendmsg+0x2114/0x2ac0
__sys_sendto+0x318/0x330
__x64_sys_sendto+0x76/0x90
x64_sys_call+0x14e8/0x1c00
do_syscall_64+0x9e/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x00000000fffbac6e -> 0x00000000fffbac6f
Reported by Kernel Concurrency Sanitizer on:
CPU: 2 UID: 0 PID: 287 Comm: mausezahn Not tainted 6.13.0-rc7-01544-gb4b270f11a02 #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
[2]
#!/bin/bash
set +H
echo whitelist > /sys/kernel/debug/kcsan
echo !vxlan_xmit > /sys/kernel/debug/kcsan
ip link add name vx0 up type vxlan id 10010 dstport 4789 local 192.0.2.1
bridge fdb add 00:11:22:33:44:55 dev vx0 self static dst 198.51.100.1
taskset -c 0 mausezahn vx0 -a own -b 00:11:22:33:44:55 -c 0 -q &
taskset -c 2 mausezahn vx0 -a own -b 00:11:22:33:44:55 -c 0 -q &
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250204145549.1216254-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
if CONFIG_NET_IPGRE is enabled, but CONFIG_IPV6 is disabled:
net/ipv4/ip_gre.c: In function ‘ipgre_err’:
net/ipv4/ip_gre.c:144:22: error: variable ‘data_len’ set but not used [-Werror=unused-but-set-variable]
144 | unsigned int data_len = 0;
| ^~~~~~~~
Fix this by moving all data_len processing inside the IPV6-only section
that uses its result.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501121007.2GofXmh5-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/d09113cfe2bfaca02f3dddf832fb5f48dd20958b.1738704881.git.geert@linux-m68k.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PHY address is a dummy, because r8169 PHY access registers
don't support a PHY address. Therefore scan address 0 only.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/830637dd-4016-4a68-92b3-618fcac6589d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add READ_ONCE() around reads of skb->dev->reg_state, because
this field can be changed from other threads/cpus.
Instead of calling dev_kfree_skb_irq() and kfree_skb()
while interrupts are masked and locks held,
use a temporary list and use __skb_queue_purge_reason()
Use SKB_DROP_REASON_DEV_READY drop reason to better
describe why these skbs are dropped.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250204144825.316785-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The original Open Systems Adapter (OSA) was introduced by IBM in the
mid-90s. These were then superseded by OSA-Express in 1999 which used
Queued Direct IO to greatly improve throughput. The newer cards
retained the older, slower non-QDIO (OSE) modes for compatibility with
older systems. In Linux, the lcs driver was responsible for cards
operating in the older OSE mode and the qeth driver was introduced to
allow the OSA-Express cards to operate in the newer QDIO (OSD) mode.
For an S390 machine from 1998 or later, there is no reason to use the
OSE mode and lcs driver as all OSA cards since 1999 provide the faster
OSD mode. As a result, it's been years since we have heard of a
customer configuration involving the lcs driver.
This patch removes the lcs driver. The technology it supports has been
obsolete for past 25+ years and is irrelevant for current use cases.
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Aswin Karuvally <aswin@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250204103135.1619097-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the structure. Notice
that `struct ethtool_dump` is a flexible structure --a structure that
contains a flexible-array member.
Fix the following warning:
./drivers/net/ethernet/chelsio/cxgb4/cxgb4.h:1215:29: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/Z6GBZ4brXYffLkt_@kspp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Attempts to replace an MDB group membership of the host itself are
currently bounced:
# ip link add name br up type bridge vlan_filtering 1
# bridge mdb replace dev br port br grp 239.0.0.1 vid 2
# bridge mdb replace dev br port br grp 239.0.0.1 vid 2
Error: bridge: Group is already joined by host.
A similar operation done on a member port would succeed. Ignore the check
for replacement of host group memberships as well.
The bit of code that this enables is br_multicast_host_join(), which, for
already-joined groups only refreshes the MC group expiration timer, which
is desirable; and a userspace notification, also desirable.
Change a selftest that exercises this code path from expecting a rejection
to expecting a pass. The rest of MDB selftests pass without modification.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/e5c5188b9787ae806609e7ca3aa2a0a501b9b5c4.1738685648.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some selftests need libynl.a. When building it try to skip
generating the ReST documentation, libynl.a does not depend
on them.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203214850.1282291-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Antoine Tenart says:
====================
net-sysfs: remove the rtnl_trylock/restart_syscall construction
The series initially aimed at improving spins (and thus delays) while
accessing net sysfs under rtnl lock contention[1]. The culprit was the
trylock/restart_syscall constructions. There wasn't much interest at the
time but it got traction recently for other reasons (lowering the rtnl
lock pressure).
Since v1[2]:
- Do not export rtnl_lock_interruptible [Stephen].
- Add netdev_warn_once messages in rx_queue_add_kobject [Jakub].
Since the RFC[1]:
- Limit the breaking of the sysfs protection to sysfs_rtnl_lock() only
as this is not needed in the whole rtnl locking section thanks to the
additional check on dev_isalive(). This simplifies error handling as
well as the unlocking path.
- Used an interruptible version of rtnl_lock, as done by Jakub in
his experiments.
- Removed a WARN_ONCE_ONCE [Greg].
- Removed explicit inline markers [Stephen].
Most of the reasoning is explained in comments added in patch 1. This
was tested by stress-testing net sysfs attributes (read/write ops) while
adding/removing queues and adding/removing veths, all in parallel. I
also used an OCP single node cluster, spawning lots of pods.
[1] https://lore.kernel.org/all/20231018154804.420823-1-atenart@kernel.org/T/
[2] https://lore.kernel.org/all/20250117102612.132644-1-atenart@kernel.org/T/
====================
Link: https://patch.msgid.link/20250204170314.146022-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Similar to the commit removing remove rtnl_trylock from device
attributes we here apply the same technique to networking queues.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250204170314.146022-5-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With the (upcoming) removal of the rtnl_trylock/restart_syscall logic
and because of how Tx/Rx queues are implemented (and their
requirements), it might happen that a queue is re-added before having
the chance to be cleared. In such rare case, do not complete the queue
addition operation.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250204170314.146022-4-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rx/tx queues embed their own kobject for registering their per-queue
sysfs files. The issue is they're using the kobject default groups for
this and entirely rely on the kobject refcounting for releasing their
sysfs paths.
In order to remove rtnl_trylock calls we need sysfs files not to rely on
their associated kobject refcounting for their release. Thus we here
move queues sysfs files from the kobject default groups to their own
groups which can be removed separately.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250204170314.146022-3-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is an ABBA deadlock between net device unregistration and sysfs
files being accessed[1][2]. To prevent this from happening all paths
taking the rtnl lock after the sysfs one (actually kn->active refcount)
use rtnl_trylock and return early (using restart_syscall)[3], which can
make syscalls to spin for a long time when there is contention on the
rtnl lock[4].
There are not many possibilities to improve the above:
- Rework the entire net/ locking logic.
- Invert two locks in one of the paths — not possible.
But here it's actually possible to drop one of the locks safely: the
kernfs_node refcount. More details in the code itself, which comes with
lots of comments.
Note that we check the device is alive in the added sysfs_rtnl_lock
helper to disallow sysfs operations to run after device dismantle has
started. This also help keeping the same behavior as before. Because of
this calls to dev_isalive in sysfs ops were removed.
[1] https://lore.kernel.org/netdev/49A4D5D5.5090602@trash.net/
[2] https://lore.kernel.org/netdev/m14oyhis31.fsf@fess.ebiederm.org/
[3] https://lore.kernel.org/netdev/20090226084924.16cb3e08@nehalam/
[4] https://lore.kernel.org/all/20210928125500.167943-1-atenart@kernel.org/T/
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250204170314.146022-2-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use string choices helpers to simplify the code.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501190707.qQS8PGHW-lkp@intel.com/
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make config option R8169_LEDS user-visible, so that users can remove
support if not needed.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/d29f0cdb-32bf-435f-b59d-dc96bca1e3ab@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make config symbol REALTEK_PHY_HWMON user-visible, so that users can
remove support if not needed.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/3466ee92-166a-4b0f-9ae7-42b9e046f333@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new selftest to verify netconsole's handling of messages that
exceed the packet size limit and require fragmentation. The test sends
messages with varying sizes and userdata, validating that:
1. Large messages are correctly fragmented and reassembled
2. Userdata fields are properly preserved across fragments
3. Messages work correctly with and without kernel release version
appending
The test creates a networking environment using netdevsim, sends
messages through /dev/kmsg, and verifies the received fragments maintain
message integrity.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203-netcons_frag_msgs-v1-1-5bc6bedf2ac0@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Remove unused flexible-array member `buf` and, with this, fix the following
warnings:
drivers/net/ethernet/aquantia/atlantic/aq_hw.h:197:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/ethernet/aquantia/atlantic/hw_atl/../aq_hw.h:197:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Suggested-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://patch.msgid.link/Z6F3KZVfnAZ2FoJm@kspp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Drivers should always disable a NAPI instance before removing it.
If they don't the instance may be queued for polling.
Since commit 86e25f40aa1e ("net: napi: Add napi_config")
we also remove the NAPI from the busy polling hash table
in napi_disable(), so not disabling would leave a stale
entry there.
Use of busy polling is relatively uncommon so bugs may be lurking
in the drivers. Add an explicit warning.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250203215816.1294081-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
lio_get_device_id() has been unused since 2018's
commit 64fecd3ec512 ("liquidio: remove obsolete functions and data
structures")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203183343.193691-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlxsw_sp_ipip_lb_ul_vr_id() has been unused since 2020's
commit acde33bf7319 ("mlxsw: spectrum_router: Reduce
mlxsw_sp_ipip_fib_entry_op_gre4()")
mlxsw_sp_rif_exists() has been unused since 2023's
commit 49c3a615d382 ("mlxsw: spectrum_router: Replay MACVLANs when RIF is
made")
mlxsw_sp_rif_vid() has been unused since 2023's
commit a5b52692e693 ("mlxsw: spectrum_switchdev: Manage RIFs on PVID
change")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250203190141.204951-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5dr_domain_sync() was added in 2019 by
commit 70605ea545e8 ("net/mlx5: DR, Expose APIs for direct rule managing")
but hasn't been used.
Remove it.
mlx5dr_domain_sync() was the only user of
mlx5dr_send_ring_force_drain().
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250203185958.204794-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The last use of mlx4_find_cached_mac() was removed in 2014 by
commit 2f5bb473681b ("mlx4: Add ref counting to port MAC table for RoCE")
mlx4_zone_free_entries() was added in 2014 by
commit 7a89399ffad7 ("net/mlx4: Add mlx4_bitmap zone allocator")
but hasn't been used. (The _unique version is used)
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250203185229.204279-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are some typos in comments/messages:
- Valiate -> Validate
- acceptible -> acceptable
- acces -> access
- relased -> released
Fix them via codespell.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203175419.4146-1-algonell@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Aspeed device supports rgmii, rgmii-id, rgmii-rxid, rgmii-txid so
document them.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250203151306.276358-2-ninad@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
neigh_parms_destroy() is a simple kfree(), no need for
a forward declaration.
neigh_parms_put() can instead call kfree() directly.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203151152.3163876-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
XFRM API makes sure that xs->xso.dev is valid in all XFRM offload
callbacks. There is no need to check it again.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/0b2f8f5f09701bb43bbd83b94bfe5cb506b57adc.1738587150.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from IPSec, netfilter and Bluetooth.
Nothing really stands out, but as usual there's a slight concentration
of fixes for issues added in the last two weeks before the merge
window, and driver bugs from 6.13 which tend to get discovered upon
wider distribution.
Current release - regressions:
- net: revert RTNL changes in unregister_netdevice_many_notify()
- Bluetooth: fix possible infinite recursion of btusb_reset
- eth: adjust locking in some old drivers which protect their state
with spinlocks to avoid sleeping in atomic; core protects netdev
state with a mutex now
Previous releases - regressions:
- eth:
- mlx5e: make sure we pass node ID, not CPU ID to kvzalloc_node()
- bgmac: reduce max frame size to support just 1500 bytes; the
jumbo frame support would previously cause OOB writes, but now
fails outright
- mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted, avoid
false detection of MPTCP blackholing
Previous releases - always broken:
- mptcp: handle fastopen disconnect correctly
- xfrm:
- make sure skb->sk is a full sock before accessing its fields
- fix taking a lock with preempt disabled for RT kernels
- usb: ipheth: improve safety of packet metadata parsing; prevent
potential OOB accesses
- eth: renesas: fix missing rtnl lock in suspend/resume path"
* tag 'net-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
MAINTAINERS: add Neal to TCP maintainers
net: revert RTNL changes in unregister_netdevice_many_notify()
net: hsr: fix fill_frame_info() regression vs VLAN packets
doc: mptcp: sysctl: blackhole_timeout is per-netns
mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted
netfilter: nf_tables: reject mismatching sum of field_len with set key length
net: sh_eth: Fix missing rtnl lock in suspend/resume path
net: ravb: Fix missing rtnl lock in suspend/resume path
selftests/net: Add test for loading devbound XDP program in generic mode
net: xdp: Disallow attaching device-bound programs in generic mode
tcp: correct handling of extreme memory squeeze
bgmac: reduce max frame size to support just MTU 1500
vsock/test: Add test for connect() retries
vsock/test: Add test for UAF due to socket unbinding
vsock/test: Introduce vsock_connect_fd()
vsock/test: Introduce vsock_bind()
vsock: Allow retrying on connect() failure
vsock: Keep the binding until socket destruction
Bluetooth: L2CAP: accept zero as a special value for MTU auto-selection
Bluetooth: btnxpuart: Fix glitches seen in dual A2DP streaming
...
|
|
Pull documentation fixes from Jonathan Corbet:
"Two fixes for footnote-related warnings that appeared with Sphinx 8.x.
We want to encourage use of newer Sphinx - they fixed a performance
problem and the docs build takes less than half the time it used to"
* tag 'docs-6.14-2' of git://git.lwn.net/linux:
docs: power: Fix footnote reference for Toshiba Satellite P10-554
Documentation: ublk: Drop Stefan Hajnoczi's message footnote
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Architecutre-specific ftrace recursion trylock tests were removed in
favour of the generic function_graph_enter(), but s390 got missed.
Remove this test for s390 as well.
- Add ftrace_get_symaddr() for s390, which returns the symbol address
from ftrace 'ip' parameter
* tag 's390-6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/tracing: Define ftrace_get_symaddr() for s390
s390/fgraph: Fix to remove ftrace_test_recursion_trylock()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- The rework that uncoupled physical and virtual address spaces
inadvertently prevented KASAN shadow mappings from using large pages.
Restore large page mappings for KASAN shadows
- Add decompressor routine physmem_alloc() that may fail, unlike
physmem_alloc_or_die(). This allows callers to implement fallback
paths
- Allow falling back from large pages to smaller pages (1MB or 4KB) if
the allocation of 2GB pages in the decompressor can not be fulfilled
- Add to the decompressor boot print support of "%%" format string,
width and padding hadnling, length modifiers and decimal conversion
specifiers
- Add to the decompressor message severity levels similar to kernel
ones. Support command-line options that control console output
verbosity
- Replaces boot_printk() calls with appropriate loglevel- specific
helpers such as boot_emerg(), boot_warn(), and boot_debug().
- Collect all boot messages into a ring buffer independent of the
current log level. This is particularly useful for early crash
analysis
- If 'earlyprintk' command line parameter is not specified, store
decompressor boot messages in a ring buffer to be printed later by
the kernel, once the console driver is registered
- Add 'bootdebug' command line parameter to enable printing of
decompressor debug messages when needed. That parameters allows
message suppressing and filtering
- Dump boot messages on a decompressor crash, but only if 'bootdebug'
command line parameter is enabled
- When CONFIG_PRINTK_TIME is enabled, add timestamps to boot messages
in the same format as regular printk()
- Dump physical memory tracking information on boot: online ranges,
reserved areas and vmem allocations
- Dump virtual memory layout and randomization details
- Improve decompression error reporting and dump the message ring
buffer in case the boot failed and system halted
- Add an exception handler which handles exceptions when FPU control
register is attempted to be set to an invalid value. Remove '.fixup'
section as result of this change
- Use 'A', 'O', and 'R' inline assembly format flags, which allows
recent Clang compilers to generate better FPU code
- Rework uaccess code so it reads better and generates more efficient
code
- Cleanup futex inline assembly code
- Disable KMSAN instrumention for futex inline assemblies, which
contain dereferenced user pointers. Otherwise, shadows for the user
pointers would be accessed
- PFs which are not initially configured but in standby create only a
single-function PCI domain. If they are configured later on, sibling
PFs and their child VFs will not be added to their PCI domain
breaking SR-IOV expectations.
Fix that by allowing initially configured but in standby PFs create
multi-function PCI domains
- Add '-std=gnu11' to decompressor and purgatory CFLAGS to avoid
compile errors caused by kernel's own definitions of 'bool', 'false',
and 'true' conflicting with the C23 reserved keywords
- Fix sclp subsystem failure when a sclp console is not present
- Fix misuse of non-NULL terminated strings in vmlogrdr driver
- Various other small improvements, cleanups and fixes
* tag 's390-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (53 commits)
s390/vmlogrdr: Use array instead of string initializer
s390/vmlogrdr: Use internal_name for error messages
s390/sclp: Initialize sclp subsystem via arch_cpu_finalize_init()
s390/tools: Use array instead of string initializer
s390/vmem: Fix null-pointer-arithmetic warning in vmem_map_init()
s390: Add '-std=gnu11' to decompressor and purgatory CFLAGS
s390/bitops: Use correct constraint for arch_test_bit() inline assembly
s390/pci: Fix SR-IOV for PFs initially in standby
s390/futex: Avoid KMSAN instrumention for user pointers
s390/uaccess: Rename get_put_user_noinstr_attributes to uaccess_kmsan_or_inline
s390/futex: Cleanup futex_atomic_cmpxchg_inatomic()
s390/futex: Generate futex atomic op functions
s390/uaccess: Remove INLINE_COPY_FROM_USER and INLINE_COPY_TO_USER
s390/uaccess: Use asm goto for put_user()/get_user()
s390/uaccess: Remove usage of the oac specifier
s390/uaccess: Replace EX_TABLE_UA_LOAD_MEM exception handling
s390/uaccess: Cleanup noinstr __put_user()/__get_user() inline assembly constraints
s390/uaccess: Remove __put_user_fn()/__get_user_fn() wrappers
s390/uaccess: Move put_user() / __put_user() close to put_user() asm code
s390/uaccess: Use asm goto for __mvc_kernel_nofault()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- update gpio-sim selftests to not fail now that we no longer allow
rmdir() on configfs entries of active devices
- remove leftover code from gpio-mxc
* tag 'gpio-fixes-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
selftests: gpio: gpio-sim: Fix missing chip disablements
gpio: mxc: remove dead code after switch to DT-only
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs d_revalidate updates from Al Viro:
"Provide stable parent and name to ->d_revalidate() instances
Most of the filesystem methods where we care about dentry name and
parent have their stability guaranteed by the callers;
->d_revalidate() is the major exception.
It's easy enough for callers to supply stable values for expected name
and expected parent of the dentry being validated. That kills quite a
bit of boilerplate in ->d_revalidate() instances, along with a bunch
of races where they used to access ->d_name without sufficient
precautions"
* tag 'pull-revalidate' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
9p: fix ->rename_sem exclusion
orangefs_d_revalidate(): use stable parent inode and name passed by caller
ocfs2_dentry_revalidate(): use stable parent inode and name passed by caller
nfs: fix ->d_revalidate() UAF on ->d_name accesses
nfs{,4}_lookup_validate(): use stable parent inode passed by caller
gfs2_drevalidate(): use stable parent inode and name passed by caller
fuse_dentry_revalidate(): use stable parent inode and name passed by caller
vfat_revalidate{,_ci}(): use stable parent inode passed by caller
exfat_d_revalidate(): use stable parent inode passed by caller
fscrypt_d_revalidate(): use stable parent inode passed by caller
ceph_d_revalidate(): propagate stable name down into request encoding
ceph_d_revalidate(): use stable parent inode passed by caller
afs_d_revalidate(): use stable name and parent inode passed by caller
Pass parent directory inode and expected name to ->d_revalidate()
generic_ci_d_compare(): use shortname_storage
ext4 fast_commit: make use of name_snapshot primitives
dissolve external_name.u into separate members
make take_dentry_name_snapshot() lockless
dcache: back inline names with a struct-wrapped array of unsigned long
make sure that DNAME_INLINE_LEN is a multiple of word size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains one Netfilter fix:
1) Reject mismatching sum of field_len with set key length which allows
to create a set without inconsistent pipapo rule width and set key
length.
* tag 'nf-25-01-30' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: reject mismatching sum of field_len with set key length
====================
Link: https://patch.msgid.link/20250130113307.2327470-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Neal Cardwell has been indispensable in TCP reviews
and investigations, especially protocol-related.
Neal is also the author of packetdrill.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250129191332.2526140-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch reverts following changes:
83419b61d187 net: reduce RTNL hold duration in unregister_netdevice_many_notify() (part 2)
ae646f1a0bb9 net: reduce RTNL hold duration in unregister_netdevice_many_notify() (part 1)
cfa579f66656 net: no longer hold RTNL while calling flush_all_backlogs()
This caused issues in layers holding a private mutex:
cleanup_net()
rtnl_lock();
mutex_lock(subsystem_mutex);
unregister_netdevice();
rtnl_unlock(); // LOCKDEP violation
rtnl_lock();
I will revisit this in next cycle, opt-in for the new behavior
from safe contexts only.
Fixes: cfa579f66656 ("net: no longer hold RTNL while calling flush_all_backlogs()")
Fixes: ae646f1a0bb9 ("net: reduce RTNL hold duration in unregister_netdevice_many_notify() (part 1)")
Fixes: 83419b61d187 ("net: reduce RTNL hold duration in unregister_netdevice_many_notify() (part 2)")
Reported-by: syzbot+5b9196ecf74447172a9a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6789d55f.050a0220.20d369.004e.GAE@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250129142726.747726-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Stephan Wurm reported that my recent patch broke VLAN support.
Apparently skb->mac_len is not correct for VLAN traffic as
shown by debug traces [1].
Use instead pskb_may_pull() to make sure the expected header
is present in skb->head.
Many thanks to Stephan for his help.
[1]
kernel: skb len=170 headroom=2 headlen=170 tailroom=20
mac=(2,14) mac_len=14 net=(16,-1) trans=-1
shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0))
csum(0x0 start=0 offset=0 ip_summed=0 complete_sw=0 valid=0 level=0)
hash(0x0 sw=0 l4=0) proto=0x0000 pkttype=0 iif=0
priority=0x0 mark=0x0 alloc_cpu=0 vlan_all=0x0
encapsulation=0 inner(proto=0x0000, mac=0, net=0, trans=0)
kernel: dev name=prp0 feat=0x0000000000007000
kernel: sk family=17 type=3 proto=0
kernel: skb headroom: 00000000: 74 00
kernel: skb linear: 00000000: 01 0c cd 01 00 01 00 d0 93 53 9c cb 81 00 80 00
kernel: skb linear: 00000010: 88 b8 00 01 00 98 00 00 00 00 61 81 8d 80 16 52
kernel: skb linear: 00000020: 45 47 44 4e 43 54 52 4c 2f 4c 4c 4e 30 24 47 4f
kernel: skb linear: 00000030: 24 47 6f 43 62 81 01 14 82 16 52 45 47 44 4e 43
kernel: skb linear: 00000040: 54 52 4c 2f 4c 4c 4e 30 24 44 73 47 6f 6f 73 65
kernel: skb linear: 00000050: 83 07 47 6f 49 64 65 6e 74 84 08 67 8d f5 93 7e
kernel: skb linear: 00000060: 76 c8 00 85 01 01 86 01 00 87 01 00 88 01 01 89
kernel: skb linear: 00000070: 01 00 8a 01 02 ab 33 a2 15 83 01 00 84 03 03 00
kernel: skb linear: 00000080: 00 91 08 67 8d f5 92 77 4b c6 1f 83 01 00 a2 1a
kernel: skb linear: 00000090: a2 06 85 01 00 83 01 00 84 03 03 00 00 91 08 67
kernel: skb linear: 000000a0: 8d f5 92 77 4b c6 1f 83 01 00
kernel: skb tailroom: 00000000: 80 18 02 00 fe 4e 00 00 01 01 08 0a 4f fd 5e d1
kernel: skb tailroom: 00000010: 4f fd 5e cd
Fixes: b9653d19e556 ("net: hsr: avoid potential out-of-bound access in fill_frame_info()")
Reported-by: Stephan Wurm <stephan.wurm@a-eberle.de>
Tested-by: Stephan Wurm <stephan.wurm@a-eberle.de>
Closes: https://lore.kernel.org/netdev/Z4o_UC0HweBHJ_cw@PC-LX-SteWu/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250129130007.644084-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 fixes from Konstantin Komarov:
- unify inode corruption marking and mark them as bad immediately upon
detection of an error in attribute enumeration
- folio cleanup
* tag 'ntfs3_for_6.14' of https://github.com/Paragon-Software-Group/linux-ntfs3:
fs/ntfs3: Unify inode corruption marking with _ntfs_bad_inode()
fs/ntfs3: Mark inode as bad as soon as error detected in mi_enum_attr()
ntfs3: Remove an access to page->index
|
|
Pull bcachefs fixes from Kent Overstreet:
- second half of a fix for a bug that'd been causing oopses on
filesystems using snapshots with memory pressure (key cache fills for
snaphots btrees are tricky)
- build fix for strange compiler configurations that double stack frame
size
- "journal stuck timeout" now takes into account device latency: this
fixes some spurious warnings, and the main remaining source of SRCU
lock hold time warnings (I'm no longer seeing this in my CI, so any
users still seeing this should definitely ping me)
- fix for slow/hanging unmounts (" Improve journal pin flushing")
- some more tracepoint fixes/improvements, to chase down the "rebalance
isn't making progress" issues
* tag 'bcachefs-2025-01-29' of git://evilpiepirate.org/bcachefs:
bcachefs: Improve trace_move_extent_finish
bcachefs: Fix trace_copygc
bcachefs: Journal writes are now IOPRIO_CLASS_RT
bcachefs: Improve journal pin flushing
bcachefs: fix bch2_btree_node_flags
bcachefs: rebalance, copygc enabled are runtime opts
bcachefs: Improve decompression error messages
bcachefs: bset_blacklisted_journal_seq is now AUTOFIX
bcachefs: "Journal stuck" timeout now takes into account device latency
bcachefs: Reduce stack frame size of __bch2_str_hash_check_key()
bcachefs: Fix btree_trans_peek_key_cache()
|
|
Matthieu Baerts says:
====================
mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted
Here are two small fixes for issues introduced in v6.12.
- Patch 1: reset the mpc_drop mark for other SYN retransmits, to only
consider an MPTCP blackhole when the first SYN retransmitted without
the MPTCP options is accepted, as initially intended.
- Patch 2: also mention in the doc that the blackhole_timeout sysctl
knob is per-netns, like all the others.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
====================
Link: https://patch.msgid.link/20250129-net-mptcp-blackhole-fix-v1-0-afe88e5a6d2c@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
All other sysctl entries mention it, and it is a per-namespace sysctl.
So mention it as well.
Fixes: 27069e7cb3d1 ("mptcp: disable active MPTCP in case of blackhole")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The Fixes commit mentioned this:
> An MPTCP firewall blackhole can be detected if the following SYN
> retransmission after a fallback to "plain" TCP is accepted.
But in fact, this blackhole was detected if any following SYN
retransmissions after a fallback to TCP was accepted.
That's because 'mptcp_subflow_early_fallback()' will set 'request_mptcp'
to 0, and 'mpc_drop' will never be reset to 0 after.
This is an issue, because some not so unusual situations might cause the
kernel to detect a false-positive blackhole, e.g. a client trying to
connect to a server while the network is not ready yet, causing a few
SYN retransmissions, before reaching the end server.
Fixes: 27069e7cb3d1 ("mptcp: disable active MPTCP in case of blackhole")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|